27.02 2015

Thin individual customization sight in the game. Change the look, style and color of the sight, adjust the width and length of the lines using console commands.

Changing the sight in cs: go. A short guide to adjusting and adjusting your scope using the console

Change the type of sight

cl_crosshairsize 0-99 - change the length of the crosshairs. It can take values ​​from 0 to infinity. At a value of 0, the divisions disappear.
cl_crosshairthickness 0.5-99 - change the width of the crosshairs. It can also take on a value indefinitely. Values ​​like 1.5, 2.5 and so on are allowed. The default value for the width of the crosshairs is:
cl_crosshairthickness 0.5

cl_crosshairgap 0 - adjusts the clearance between the crosshairs. The default is zero, but it can take both positive and negative values, for example -3, -2, -1, 0, 1, 2, 3. Most professional players use the value -1:
cl_crosshairgap -1

cl_crosshairdot 1 - Adds a point to the center of the sight
cl_crosshairdot 0 - removes the point from the center of the sight

cl_crosshair_drawoutline 1 - a black outline appears around the scope
cl_crosshair_drawoutline 0 - removes the black outline around the crosshair
cl_crosshair_outlinethickness 1-3 - adjusts the thickness of the black stroke around the scope, takes values ​​from one to three

cl_crosshairusealpha 1 - turns on crosshair transparency
cl_crosshairusealpha 0 - turns off the transparency of the sight
When the transparency of the sight is on (cl_crosshairusealpha 1), to adjust this very transparency, use the command:
cl_crosshairalpha 0-255 - with a value of 255, the color of the sight is maximally saturated, and with a value of 0, the sight disappears completely

Probably everyone, playing counter 1.6 noticed that the scope has big size and diverge even more at the moment of firing. Because of this, you cannot accurately hit the enemy and subsequently die, letting the whole team down. In this article we will tell you how to make a small sight in cs 1.6 forever or temporarily.

Install a different version of the game

One of the effective solutions would be to download another cs 1.6, where the scope already has a small size. Typically, some versions have a patch that makes the scope small. I advise you to look for download links on the forums for this game.

Through the console

If you don't want to download another Counter-Strike, you will have to use the console (~). To do this, start the game and go to some server. After joining the game, turn on the console and enter the code cl_lw 1, then press ok and close the panel. Next, you need to land the character and, without releasing the button, press the console by entering the code cl_lw 0 (you can also sit down, for example, in window hole on the mansion map). As a result of entering these commands, the sight will become small, but you need to carry out such an operation every time you enter the CS.

Another method using the console

Turn on the game and open options. In the video settings, change the resolution to 620x480. After that open the console and enter the code cl_dynamiccrosshair 0. Then you can return the extension settings back. Having entered one of the servers, the scope will have a small size.

Output

From now on you know how to make a small sight in cs 1.6 forever or for one game. I advise you to remember all the commands so that next time you enter them in a few seconds. And you know, the outcome of any shootout depends on the small sight, because it is with it that you can get to the place you were aiming at, in particular the head.

Date: 29.06.2014

Before starting an article that will tell you how to set up a sight in the game Contre 1.6, I would like to say why all this is needed. You have probably already played on different cards - dark and light. Often times, the scope is simply invisible in the game, which undoubtedly affects your gameplay. Therefore, it is very important to choose optimal settings for any maps, or even bind to the scope adjustment buttons specifically for maps with light textures and also for dark maps.

Sight settings through the "Main menu"

In all assemblies Counter-Strike 1.6 There are several options for adjusting the sight from the site. You can customize the sight through the "Main menu of the game", which can be called by pressing the item "Game settings" in the game menu, use the console to enter the necessary commands, or configure the sight through the command menu in the game itself, which is displayed by pressing the "H" key.

Setting up the sight in the main menu usually does not cause any difficulties. Everything there is quite simple and understandable, especially if the assembly of Kontra is translated into Russian. The first dropdown menu is responsible for the scope size. But for clarity, we will analyze the English version of the game.

1. "Auto-size" - the size of the sight is adjusted to the screen resolution of your monitor

2. "Small" - the smallest scope size

3. "Medium" - medium-sized scope

4. "Large" - the largest size of the scope

In the next drop-down menu, you can select the color of the crosshair. By default, there are only five primary colors available in the main menu of the game, but this does not mean at all that you cannot choose others. And for this it is already necessary to resort to console commands, which read on.

1. "Geen" - installs green color

2. "Red" - sets the color to red

3. "Blue" - sets blue color

4. "Yellow" - sets yellow

5. "Ltblue" - sets the blue color

Customize the color of the sight through the console

In order to set a different from the default color of the sight, you need to open the console and type the command "cl_crosshair_color" *** *** *** "", where the symbols "***" are the numerical value of colors in RGB format.
You can find out and choose a color using any graphic editor, where in color palette you can choose a color and see its values. What is RGB format? It is a combination of three colors: "R" - red, "G" - green, "B" - blue. Immediately I would like to draw your attention to the fact that it is imperative to surround the symbols of flowers with quotes. For example, "cl_crosshair_color" 255 255 255 "", otherwise the client will recognize only the first color value, and the rest will be taken as zeros.

Setting up the sight through the console

The cl_crosshair_size command is responsible for the size of the sight. Use any of three values ​​- small, medium, and large. If you want to set the medium size, then enter "cl_crosshair_size medium" in the console. Many players are wondering how to make sure that the scope does not expand when shooting. The console command "cl_dynamiccrosshair 0 | 1" is responsible for this. So, to disable the extension of the sight, it is enough to enter "cl_dynamiccrosshair 0", thereby disabling the dynamics. Such a command in cc 1.6 as "cl_crosshair_translucent 0 | 1" allows you to enable or disable the transparency of the sight.

Everyone has long known that what smaller size crosshair in CS, the more convenient and accurate it is to shoot. Small sight in CS 1.6 will allow you to hit the enemy with greater accuracy, which is at a great distance from you. The smaller the scope, the more convenient it is to focus on the opponent. Many do not know that it is very simple to make such a sight and even try download small scope, although it is simply impossible to download it.

How to make the crosshair smaller for CS 1.6

To resize the scope you only need a console command specifically designed to resize the scope of your weapon. Prescribe a small scope in the console as follows:

• You need to start CS 1.6 and open the console (this can be done using the Russian letter "Ё", which is also "~" for an English keyboard layout).
• Next, we need to enter a list of console commands in strict order (one at a time).

cl_lw 1
cl_lc 1
cl_dynamiccrosshair 1
+ duck
cl_lw 0
cl_lc 0
-duck

To prevent the sight from expanding, you need to execute the command

cl_dynamiccrosshair 0

The size of the crosshair returns when exiting CS 1.6. Therefore, it is better to register these commands in the config CS, so as not to register commands when starting the game or logging into game server.

Reducing the scope - example

What should be obtained using the example of a standard sight for the default Counter-Strike 1.6 pistol. The sight of the M-16 rifle will accordingly be smaller than that of a pistol in proportion to that of other weapons.

First image before entering console commands.

Second image: the scope has become smaller.

Monitoring game servers CS 1.6

Go to the Counter-Strike 1.6 monitoring and win in the arena. Using a small scope is easier to shoot - easier to win.

How to make the crosshair smaller for CS 1.6

To resize the scope you only need a console command specifically designed to resize the scope of your weapon. You can register a small sight in the console as follows:
You need to start CS 1.6 and open the console (this can be done using the Russian letter "Ё", it is "~" for the English keyboard layout). Next, we need to enter a list of console commands in strict order (one at a time).
cl_lw 1
cl_lc 1
cl_dynamiccrosshair 1
+ duck
cl_lw 0
cl_lc 0
-duck
This is how they should look like we see on the screen:

Reducing the scope - example

What should be obtained using the example of a standard sight for the default Counter-Strike 1.6 pistol. The sight of the M-16 rifle will accordingly be smaller than that of a pistol in proportion to that of other weapons.

First image before entering console commands.
And so we look at the screen with a standard sight:

And here is the scope, which we have already reduced:

Console commands for stable shooting

Cl_updaterate 102
is responsible for the number of packets received from the server to the client (maximum value 102), If you have a slow Internet, set 20-30, with a fast one, 102 is better.

cl_cmdrate 102
responsible for the number of transmitted packets from the client to the server (there is no max value, but it is better to set the same value with the cl_updaterate command, namely 102)

rate 100000
is responsible for the speed of transferring information from the client to the server and only affects the shooting speed (that is, the cartridges fly faster) (max value 100000)

ex_interp
is responsible for the time of any action of the player model between each successive update. It is an important command, it depends on the ping. If your ping is 1-25 - put ex_interp 0.01, if your ping is 30-120 - put ex_interp 0.1

fps_max 1000
frames per second limiter. On NonSteam versions, the maximum value is 101, on Steam there is no limit. On FastCup, overPRO (MIX GAME), a value greater than 100.5 FPS is prohibited.

fps_override 1
strictly for Steam clients. Allows the use of FPS over 101.

hud_fastswitch 1
when choosing a weapon, it will immediately switch, without clicking the mouse

cl_righthand 1
right hand weapon

cl_dynamiccrosshair 0
immobilized sight (helps when shooting)

cl_weather
0 | 1 | 2 - weather on the maps. I recommend 0 for higher FPS.

net_graph
1 | 2 | 3 - displays useful network information in the lower right corner of the screen.

Sight adjustment

Many, after 3-4 incomprehensible deaths, ask the question of how you can constantly hit the head, I will answer a lot depends on the sight in the cs, then we will change it, just do not forget that shooting with a clip is tantamount to a clip released into the sky, so you you won't hit anyone.
all values ​​are entered in the console, which in the menu is called with the (~) tilde key
If you are tired of a big useless sight, enter this line:

Setting option according to the old version
cl_crosshairscale 20000 (very small scope)
cl_crosshairscale 5000 (dynamic small scope)
cl_crosshairscale 2000 (medium scope)

The former command to reduce the cl_crosshairscale sight does not work. Cl_crosshairsize is now in effect. The value must be set at your discretion, cl_crosshairsize 1, 2, 3, etc. It's just not now large values variable of type 2500 or 1500, and all values ​​have become smaller.

This method is simpler than the first, because you need to register the command only once, and not every time you log on to the server.

1. We go into the game.
2. Then open the options and go to the video settings menu.
3. Change the resolution to 640x480 or 800x600
4. Save the settings
5. Open the console and write the command cl_dynamiccrosshair 0
6. Press Enter
7. Go back to the options in the video menu and change the resolution back to the one you had before.

The size of the crosshair returns when exiting CS 1.6. Therefore, it is better to write these commands in the config: config.cfg so as not to write commands when starting the game or entering the game server. P.S - steam cloud synchronization is possible
Steam cloud. This is the system that stores your saves and user settings on steam servers. Those. when reinstalling the game, your settings and saves will be saved. This feature can be disabled in the settings.

To prevent the sight from expanding, you need to execute the command
cl_dynamiccrosshair 0

Sight transparency:
You can change the crosshair in CS to transparent, and vice versa, using the cl_crosshair_translucent console command:
1) 0 - disable the transparency of the sight
2) 1 - turn on the transparency of the sight

Sight color:
You can change the crosshair color in CS using the "cl_crosshair_color" console command.
main parameters colors must be specified in the RGB system, that is, in the format "100 200 300", where instead of 100 - the intensity of red, 200 - green, 300 - blue.
For example, if you want a white crosshair, you should write the cl_crosshair_color "255 255 255" command.
cl_crosshaircolor and a number between 1 and 5 gives different colors

after changing the color of the sight, as well as entering any other commands in the console, you will need to re-enter these values ​​for the parameters of the sight.
1.cl_interp 0.033 or cl_interp 0.055 since there are delays due to ping, you can see a picture that does not correspond to reality on the screen, this command corrects this situation... the default is 0.10, experiment.

Yet this command has one drawback - it only reduces the line of sight. Also, be sure to mention the ability to return all old settings. Although, it seems not all, the ability to change the color remains. To do this, enter the following command: cl_legacy_crosshair_scale 1. If you want to return it back - write the same command, but with a value of 0.

That's the whole setup of the sight in cs 1.6 through the console. Enjoy your game!
If this article helped you, do not be lazy and click "Like". It will be clear that it was not in vain that I wrote this article :)