Why is the navigator not charging from the computer? Navitel navigator does not charge, you want to know why and what to do

The GPS navigator does not turn on in the car either autonomously, from the built-in battery, or when external power is supplied to it from the cigarette lighter. Why might this be happening? If the button for turning on the navigator is working properly, then the reason may be a malfunction of one of the elements of the charging circuit. It is likely that the navigator does not want to turn on due to the fact that its battery is discharged and does not charge. If there is no charge, then switching on will not occur. For example, the charging connector of the navigator is faulty. In this case, the navigator does not charge and does not turn on, because it does not receive current from an external power source (from the vehicle's on-board network, through the cigarette lighter). Obviously, in such a situation, it is necessary to replace the charging connector of the navigator. It doesn't matter what kind of GPS navigator you have: Garmin, Explay, Prestigio or any other. This is the simplest and most common reason why the navigator does not charge and does not turn on. It is possible that the connector itself is operational, but the contact tracks to which it should be connected are damaged. In other words, the connector is partially or completely detached from the printed circuit board. The next element in the navigator's charging circuit is the power controller, which can also fail. For example, due to a power surge at the moment the engine is started with the navigator turned on through the cigarette lighter. Sometimes the navigator does not turn on due to deep discharge or complete exhaustion of the built-in rechargeable battery. In car navigators, lithium-ion (li-ion) batteries are usually used, which are contraindicated in full / deep discharge, high and low temperatures. These factors lead to a significant decrease in capacity and even complete failure of the battery.

Now let's get back to the power button. Sometimes it also fails - infrequently, but this also happens. The power button may stop working as a result of mechanical damage (impact or strong pressure) or moisture getting into the navigator. Moisture can lead to corrosion, oxidation and damage to the internal electronics of the navigator that supply power.

Let's summarize. Briefly, the list of elements of the navigator's charge circuit, in case of failure of which it does not turn on, looks like this:

  • Charging connector.
  • Power controller.
  • Battery.
  • Power button.
  • Other items such as PCB tracks.

In addition to the listed elements of the navigator itself, do not forget about the charger (power cable from the cigarette lighter). Maybe it's him or his contact with the cigarette lighter. It so happens that you changed the car, turned on the navigator in the cigarette lighter, but it does not charge. In such a situation, you can try to twist the cable in the cigarette lighter socket in order to achieve reliable contact of the cable plug with the vehicle ground. The fact is that usually the navigator cable has only one of the two side (minus) contacts on the plug working. The navigator may not receive external power also because the depth of the cigarette lighter socket may be deeper than the length of the power cable plug. What to do? Find another cable with the correct plug length.

A few words for those who like dangerous experiments with their navigator, for example, attempts to change the firmware on their own. This is another reason why a fully functional navigator (before committing "violence" over it) becomes "dead" and does not react in any way to attempts to include it in work. There is only one way out - to hand it over for salvation into the hands of "doctors", or rather "resuscitators" from the service center.

So, we have considered all the most common reasons why the navigator does not charge. Obviously, it is difficult for the owner himself to understand for which of the listed reasons the navigator's battery is not being charged. You can try to clarify the situation if you put the navigator on charge for a couple of hours through a known working mains charger or through the USB port of a computer (laptop). If this did not help (there was no charging and there was no charging), then you definitely need to carry the navigator to the service center, where experienced specialists will accurately determine the cause of its malfunction and

I welcome you to. For many car devices, the weak point is the battery, I think if you have at least a car navigator, then you know that even the most "pumped" and expensive models cannot keep charging during battery life for more than 2 hours. And why, in fact, should the manufacturers of gadgets spend money on the development of a powerful battery, because a car device is needed to work, for the most part, from a cigarette lighter. 95 percent of all gadgets use charging from the cigarette lighter, but as soon as you turn off the device, as another gadget starts to "sit down" rapidly.

Imagine a situation that you urgently need to disconnect the navigator from the cigarette lighter and use it in your hands. Take me at least. I really like to relax in nature, I have one interesting hobby - searching with a metal detector. I drive through abandoned places, climbing in search of untouched places in the wilderness. And I just need a navigator. I can get to my destination using the navigator connected to the cigarette lighter, but then it will be difficult for me to use the navigator. So I googled and found a way out - I bought a portable power source to which I connect my car navigator and it can work for at least 12 hours autonomously, charging from this unit. Is the solution simple? Of course)) In addition to car gadgets, you can charge cell phones and other devices.

The navigator is connected with a portable power supply via a USB connector, it is very convenient - you can use a cord to connect the navigator to a computer. It turns out such a thing - I hold the navigator in my hand or it is in my pocket, sometimes I look at the screen, I have it always on. The gadget is connected via a wire to a mini-power source; it is even smaller in size than a navigator, something like a portable hard drive.

So, I chose the XPB20 model. This is a fairly powerful power supply unit, it has an amazing battery capacity - 4 Ampere / hour, which is a lot. For example, a screwdriver has an average battery capacity of 1.3 Ah. This high capacity is made possible by a lithium-ion battery.

How to use this portable power supply (in fact, it is a spare battery for many devices - you can connect car navigators, DVRs, tablets, laptops and other devices). In general, the thing is irreplaceable. Before you can start using it, you must first charge it. To do this, we connect the power supply to a laptop or computer via USB. When it is charged, all the diodes will light up at the same time. This is a signal that the XPB20 power supply can be disconnected from the computer and it is ready to work.

If you have never used a navigator before, you might think that, like many other devices, it requires some special skills from its owner and it is easy to learn how to use it. However, this is not at all the case. It is quite simple to install and then set up and work with the navigator, in addition, the set with the device always contains instructions for use, and if not in paper, then in electronic form it is obligatory! So, before you start working with a GPS navigator and go on your first journey with this technique, you need to install it.

How to learn to use the navigator in the car?

So, if you purchase a car navigator, then a stand and a bracket are always supplied with it. A bracket in a car is usually installed on the front of the car or on the windshield. There are other locations, however, with glass and panel being the most common. The terms of use state that the GPS navigator must not be placed where it will interfere with vehicle control, or where it will obscure the view. In addition, the equipment does not need to be mounted where the airbags are located.

Very often, the device is sold with a discharged battery, so it is impossible to use it. In this case, it must be charged either with a mains charger or via a USB cable (it all depends on the configuration). If it is a car navigator, then it can also be charged through a car charger.

Each model of GPS navigator displays marked points, trajectory of the traversed path, geographic coordinates of the point where you are and, accordingly, your device, as well as your current position. Also, each device has several pages that display various information: a map with traversed paths and points, position in the sky of satellites, a page for me with search and access to various settings, a navigation page, as well as a trip computer page where speed can be displayed movement, distance traveled and so on.

The use of a GPS navigator assumes this function as well. As a rule, for this it is enough to press, and then hold down the button specially designated for this for a short time. The same function can be performed through the navigator menu.

Instructions (rules) for finding a point that you "remember"

In order to find a point, you must first select it from the list of existing ones, and then press the "Go" button. An arrow will appear on the page titled "navigation", which will show you in which direction to move.

What are routes and paths and how to use them correctly?

A track or path is a trail that you have already traveled. Thanks to the factory settings, it is written to the device memory by default. However, this feature can be disabled if you do not need it.

A route or route is one that has been marked in advance by points. In navigation mode, the device can guide you both along the track (Track back) and along the route. You can also first build a route on your computer, and then enter it into the device. But you can also build on the navigator itself.

Track back function - instructions for use

This function is a mode in which your navigator takes you back exactly along the path that was covered. The arrow on the "Navigation" page shows the turns.

How to use a barometric altimeter correctly?

All GPS navigators determine vertical coordinates. In this case, the elevation above the geometrical theoretical figure of the earth is determined. In order to determine the exact height above any surface (including above sea level), it is necessary to use a barometric altimeter. At the same time, it should be remembered that fishermen do not need height, but the presence of a pressure change graph in the navigator.

Video about using navigators

GPS navigators are, as everyone knows, electronic devices that serve as aids in orientation in space. They are especially useful for drivers who want to avoid traffic jams (which is not uncommon in big cities) or who want to find a short or alternative route. And yet navigators, like any other electronic device, often fail for various reasons. If your GPS device has been damaged due to which Navitel navigator does not charge from the cigarette lighter, do not try to eliminate faults yourself - it would be wiser to seek the help of experienced technicians of our service center. In the gsmmoscow service, we carry out a high-quality repair of GPS navigators in the shortest possible time Navitel all models at lower prices.

Perhaps one of the most important advantages of our service center is that we provide the longest warranty period for original spare parts, namely one year. Repair of GPS navigators and other devices in our service center is carried out by professional craftsmen who have significant experience in eliminating breakdowns of any level of complexity and experience in carrying out all types of repair work. In addition, we cooperate directly with manufacturers of original components and spare parts, and this, in turn, has a positive effect on the quality of repair work carried out by us. In addition, it is also worth noting that thanks to this, the prices for repair services provided by our service center for repair services are more than acceptable.

Reasons why Navitel navigator does not charge.

Navitel GPS navigator does not charge- this is one of the most common problems; it arises for a variety of reasons. Below are some of the most common reasons:

1. Most often it does not charge Gps as a result of failure of the power connector: this usually happens as a result of mechanical influences, such as shock - in this case, the power connector will need to be replaced;

2. This problem can also occur if the power connector is loose, or if it is in an unstable position - this means that the power connector is most likely disconnected from the PCB, and the PCB will have to be rebuilt;

3. Another common reason why Your GPS device does not charge, there may be a breakdown of the power microcircuit: the microcircuit may fail as a result of the ingress of liquids or a shock - the problem can be solved only by replacing the microcircuit;

4. In the event of other malfunctions, device diagnostics are required to determine the nature of the malfunctions.

How long will it take to fix the problem if the Navitel navigator does not charge:

1. If there is a breakdown with your GPS-navigator (for example, if Navitel unauthorizedly reboots, periodically hangs, does not charge or generally does not work correctly), and you have no idea, what to do in this case, then you just need to contact a specialized service center. Here your device will be tested for possible problems. Diagnostics takes, as a rule, from thirty minutes, and after that the nature of the malfunctions and the approximate duration of the repair are determined;

2. It will take up to two hours to replace individual parts such as microcircuits, controllers and so on; the duration of replacement parts depends on the GPS model, as well as the complexity of the parsing.

If you find any problems with your GPS device, please contact our service center. We will carry out a high-quality repair of the navigator Navitel and we will provide an optimal price-quality ratio.

Do not forget that the uninterrupted operation of your Navitel navigator (and any other device) depends on whether you follow the basic operating rules.