Skiing from the mountain is a favorite pastime for children of all ages, and only adults can provide them with convenience and comfort in such a matter, and they have more than enough fun and enthusiasm. The slide can be built from a variety of materials at hand, and from which, will be described in this article.

What is needed for the slide

In order to make a slide with your own hands, you can use metal, plastic, wood, as well as improvised materials left over from the old cabinet and writing desk... Although possessing a little imagination, you can build a real miracle from them and put them in the corner of the children's room to the delight of your baby.

You can make a slide for your child from an old desk.

For this you will need:

• lacquered cabinet door;
• plywood sheet;
• small boards, which can be pieces of a shovel handle, legs from a table or chair.

Manufacturing steps:

Making a slide of snow

Making a mountain with your own hands out of snow is very simple. The main thing is to wait until the temperature outside is close to about 0 ᵒС. And, of course, it is important to have a sufficient amount of snow.

And you will also need:

• a shovel made of metal or plastic;
• construction trowel, scraper;
• bucket or watering can;
• warm mittens.

Manufacturing steps:

1. The primary task is to determine the location of such a homemade attraction. To minimize injuries, it is imperative to provide a roll-out onto level ground in order to
   the child could roll evenly to a complete stop.
2. Determine the height of the slide based on the age of the riders. For crumbs up to 3 years old, an elevation of 1 meter in height will be enough, and for older children, you can build a higher slope, the main thing is that the prick of the slope does not exceed 40 degrees.
3. Having rolled up several large balls, form the foundation of the future building from them. If you plan to make a high enough slide, then you should think about how the children will climb it. The problem can be solved by making the same snowballs that can be placed at the foot in the form of steps.
4. Smooth the surface of the steps with a spatula and scrapers and leave the structure until the onset of cold weather.
5. The slide should be poured in frost. It is not recommended to use buckets or a hose for this, as there is a high risk of large pits forming. It is better to use a regular garden watering can or the one that housewives use to water houseplants.
6. Slowly pour water onto the structure onto a piece of plywood or a shovel with a wide working part. Or you can cover the elevation with a large piece of cloth and pour through it - this will help the liquid to be evenly distributed over the snow.
7. If, in addition to the bucket, there was nothing at hand, then the water in it must be mixed with snow and this very slurry should cover the surface, leaving it to freeze overnight, and in the morning repeat the procedure.
8. That's it, the slide is ready. If necessary, potholes on it can be trimmed with a spatula.

A do-it-yourself snow slide is an ideal activity for adults and children. After all, you will have to spend only a few hours building the structure.

But for the whole winter, your kids will get a wonderful ice attraction.

We all start together

How to fill a slide of snow? It takes just a little - snow, desire and enthusiasm. Well, also a few working hands. It is good to involve children in this business. After all, a do-it-yourself slide of snow will be especially beloved if a piece of your labor is invested in it. Younger children can be entrusted with the simplest and most elementary work, for example, bringing snow in children's buckets or rolling snowballs. Older kids can be puzzled by building steps. Well, the more experienced can even be entrusted with filling the descent with water. Believe me, the children will remember the process of building a slide from ice and snow for a lifetime. It's so exciting!

Required inventory

Before building a slide of snow, we will prepare the tools and devices that will be needed for the job. There should be a lot of snow so that you can build a frame and steps from it, as well as add slides during operation. You also need to prepare:

It is advisable to well equip the kids who will help you with the construction. After all, the main thing in this matter is not to get sick, and not just the solution to the question: "How to fill a hill of snow?" Therefore, it is better for children to wear waterproof overalls, and also stock up on several pairs of gloves. Make sure that the kids do not sweat and do not unbutton at the same time, otherwise it is very easy to catch a cold.

Specifications

Any construction object must have its own parameters. They depend on the age of those who will ride the homemade slide. If these are teenagers and adults, you can safely erect a slide with a height of one and a half to two meters. If kids ride on this snow attraction, then the height of the slide should be no more than one meter.

The length of the descent, so that it is easy and not dangerous to ride, should be provided for about 5 meters. It is very important to calculate the angle of descent. The slide should not be too steep, the slope should be about 40 degrees. If you make it bigger, then the pleasure of

there will be less descent, moreover, at the end of the descent on a steep hill, the child may receive a tangible blow. But a hill that is too flat will be uninteresting, because then the speed of the driver will be significantly reduced.

The width of the slide must be large enough to be able to slide off the sled. This is about half a meter, no more. When you figure out how to fill the slide with snow, do not forget about the bumpers on the descent to ensure safety. Otherwise, babies risk falling before reaching the end.

Do not forget about reliable steps - it will be easy to climb the hill along them, and if they are sprinkled with sand, they will cease to be slippery.

Benefits of a snow slide

If you make a slide at the beginning of winter, then throughout the snowy time it will be possible to improve and modernize it, adding arches, turns, making branches, adding and decorating with snow sculptures. The advantages of this design are obvious:

• construction can be carried out with children of all ages;
• no special costs expensive materials or specific tools are not required;
• you can experiment and apply your own designs.

Before pouring a slide of snow, you need to choose a convenient place. It is very important to place it away from the roadway and away from paths. See how well it gets covered in evening time, because it gets dark early in winter. Choose its location so that there are no bushes and trees nearby, no fences and hatches, poles, or anything that could pose a danger to the skaters.

Shovels in hand - and forward

Better, of course, to guess when the relatively warm day comes. Then the snow will be sticky and the construction process will be much easier. How to make a slide of snow? First, roll some snow balls different sizes... We put the largest one at the base, then we set the smaller ball and so on until the very descent. The empty space between them is covered with snow and tamped tightly.

Then we form the steps. They should be wide enough and not too high. It is recommended to lay sheets of plywood on the descent line - then the surface will be flat and smooth. The plywood should be covered with snow and the surface should be tamped tightly with a thickness of about 10-15 centimeters. Then, after filling with water, the descent will not sag and no pits or bumps will appear on it.

Fill it several times

When the frame of the slide is ready, it remains only to fill the descent with water. It is best to repeat this several times over several days to keep the ice layer firm.

Otherwise, the ice will quickly break with a sled. Do not pour water with a strong stream so as not to wash out the snow, do it carefully and slowly.

If there are already frosts on the street and it is impossible to choose a warm day for the construction of a slide due to meteorological conditions, then from plywood and wooden boards you can install the formwork and fill it with snow.

It will also be convenient to cut snow bricks from snowdrifts that are well compressed. They are placed, for example, at the base of the steps.

Initially, the steps should also be filled with water - then they will acquire strength and will not crumble underfoot. As soon as they freeze well, they must be sprinkled with sand so that the children can climb them without fear.

Think about the top of the snow slide as well. It should be level, safe and relatively large so that the child does not fall off of it. You can also lay boards or plywood on top of it. But you should definitely provide that the site is not slippery.

You can make two descents from the same site: one steeper, the other more gentle. Do not forget to decorate your slide with an arch or a funny snowman - your attraction should not only be functional, but also aesthetically pleasing.

Winter is coming, and we need to prepare a winter ice slide for our children. In this article, I would like to help you with the answer to the question `` How to make a slide with your own hands? '',

Naturally, to build a slide you need a large number of snow and frosty weather. Then, you need to choose a comfortable and safe place to create the slide. It should `` grow up '', away from the roadway and, preferably, not rest against the sides of the driveway and all kinds of buildings.

The hill is best done by a friendly company - one carries snow, the other works with a shovel, the third ramps the applied snowdrifts.

First you need a large, wide shovel. The next step is to apply snow, the more the better. It is worth deciding for whom the slide is being built. If for small children, then it should not be too high. And the width of the slide, as they say, is made "to taste" - from one meter to two. Well, and on the length of this snow creation, you can not save - all five meters! If, of course, the free space around the slide allows the `` builders '' to swing like that.

How to make a children's slide without steps? No way, because the steps are necessary for the slide. They are done from the highest side. As for the sides, it is not worth focusing on them, since they can be made only later, when the slide is filled with water.

1. So, the main part of the construction of the slide is completed, now the most important is the filling. The hill is poured cold water from a hose, but you can actively use watering cans and buckets. Only the steps do not need to be poured, otherwise you will not be able to climb the hill later.

2. How to make a snow slide so that it is smooth and slippery? It is necessary not to be lazy and fill it at least three times. In order for the slide to freeze thoroughly, without unnecessary bumps and dents, it must be constantly trimmed and smoothed with a wide shovel.

3. It is recommended to fill the slide in the evening. At night it will freeze, and in the morning the children will already have fun skating with it. You can ride on ordinary cardboard, so to speak, in the old fashioned way, or use modern ice sleds for higher speed.

4. The most convenient time to do the slide is during the thaw, when the snow is heavy and sticky. The snow `` mound '' you have made will need to be trampled down and left for a while, so that it settles and cakes to a denser mass. The height of the slide will depend on what age children will ride on it - for kids no more than a meter, for older children - 1.5-2 meters in height. The surface of the descent must be flat, the curbs must be made high enough. Pay attention to the angle of descent - if it is more than 40 degrees, the slide will become traumatic.

5. It is necessary to fill the slide in frosty weather. Just pouring it with a bucket and a hose is a bad idea, large mass water, especially under pressure, will simply wash away the snow, forming pits. Time consuming but win-win - common garden watering can... You can pour water on a flat surface from which it will drain onto the snow - on a piece of plywood or a wide shovel. Sometimes it is recommended to cover the hill with a large rag and pour through it - the water will be more evenly distributed over the snow. If you don't have anything like this at hand, fill a bucket of water with snow from the nearest snowdrift, stir with a stick and evenly cover the hill with the resulting snow slurry. Level the surface and leave the slide to freeze overnight, and the next day coat it with snow porridge again and let it freeze completely. From the descent, you can make an ice path with water or with the same snow porridge, so that the skiers can drive further.

The surface of the descent will need to be kept in order, making sure that no potholes form on it.

You also need to make steps, make them 10-15 centimeters in height.

For construction we need: a couple of large shovels, a lot of water and a great mood. And also you cannot do in this business without frost, snow and several pairs of free hands.

Choosing a place for construction

First you need to determine the place for construction. It must necessarily be safe, that is, it is located away from plantings, buildings and other objects into which you can crash.

Determine the height, width and slope of the slide

The choice of height depends on the area on which the slide is being built, taking into account the length of the slide. If you are building it for kids, the slope should not be steep, on the contrary, make it gentle. For adults, the optimal angle will be 40-50 degrees at the beginning of the mountain, and gradually decrease, making it more gentle.

We make steps and sides

Place the steps on the highest side of the mountain. Their width should be about 50 cm so that it is convenient to rise.

It will also be great if you make bumpers on the sides of the steps, 30 centimeters high. The same can be built along the edges of the slide itself, so that you can safely ride and not be afraid to fly out of it.

Sculpting a mountain

You need to start construction after waiting for a thaw. It is when the snow is sticky that you can easily make a slide of snow. After that, the embankment must be well tamped.

Fill in

It is imperative to fill the slide in frost. This can be done from a hose or buckets. And the most The best way- an ordinary watering can. After climbing the steps, pour gently and slowly, trimming the surface to create a perfectly even finish. You can fill the slide with a large shovel or plywood, pouring water onto their surface, from which it will drain onto the snow. You can do this by covering the mountain with a huge rag - thanks to this method, the water will more evenly cover the mountain. Another way: collect snow in some container, stir with a stick and evenly cover the mountain with this gruel. Where water holes have formed, fill them with snow and fill them again.

Finishing touch

After the slide is filled, leave it alone until the ice freezes. Then pour in the same way a few more times, leaving the ice to freeze. Do this until the ice is perfectly flat and leave the slide overnight. During this time, your structure should freeze even more and you can try to ride. But before that, do not forget to shake the steps with sand, and spill the hill again with water and let it stand for another hour. Another nuance - be sure to make sure that the transition between the descent and the ground is smooth.

Slide Rides

You can swim down the slide on bags, bags, cardboard or rubber mats. But all these devices are not safe, because when descending on them, you can get injured, as well as frostbite or crumple your hands. For a faster, more comfortable, and most importantly safe descent from the ice slides, there are special equipment: ice cakes, tubing or cheesecakes.

Ice-cube is a special device for sliding downhill made of plastic in the shape of a heart. Such a plate is very light and it is convenient to take it with you for walks, and you can control it with a handle.

Tubing or cheesecake - an inflatable ring, similar to a life buoy, inside which there is an inflatable chamber, and outside a protective cover bright color... It also has handles for the child to hold on to.

Outcome

Ice slide skiing is a well-known traditional pastime. Knowing all the nuances and rules, you can easily build such fun in your yard. A DIY Ice Slide Can Become the best gift beloved family for the New Year holidays.