Everyone's fashion and hobbies are their own, and therefore it is sometimes very pleasant to find like-minded people, to appreciate their collection of brands or skill in a specific game. There are various videos, which are devoted to one or another enthusiasm. It does not matter if you love chess, tennis or collect wild, unbridled animals under their roof - here you will be able to find good video - Content in the shower.

It is now very popular both on the network, and in reality one hobby is available for most of the female sex - make-up on camera. The usual viewers will seem that in these videos, the girls simply face and inflate the elephant flies. But in fact, these beauties demonstrate their artistic skills that have developed years. In such videos, you can find tips, lifehaki, and also emphasize many useful moments that have missed in your life. Figure models and their stylists will tell you what to pick up the eyeshadow, and what to choose a dress to your hairstyle. For many women, it became a kind of hobby, which they pay almost all their lives.

In addition to Make-APA, many girls simply adore shopping, and therefore it is often poured on "YouTube" their trips to the local shopping centerwhere they are serving clothing and begin to view it and measure it. Such girls often collect at home a whole collection of various outfits, and some could even open their store and sell clothes for several years - they have so many purchased outfits. And all their immense collection falls into the camera lens. I honestly not clear why many girls look like this, but the customers have such content and it is a bit strange.

However, not only girls love fashion and style and distinguished themselves with their hobby, men also have a lot of different hobbies that can strike to the depths of the soul. Someone collects napkins from shops, someone loves to play sports simulators (which is wildly in itself), but there are those who are engaged in all days that they stick to women and collect their kisses. At the same time, they prefer their adventures to record on the camcorder, and then set the rollers to the universal review and make great macho.

In any case, in our world there are so many different hobbies, classes, affairs and all of them can captivate a person with a certain warehouse of the mind for a while, and maybe at all for life. There are so many of them that list them further well, it simply makes no sense. On this page you can find hundreds various videosAnd they can be dedicated to anything. After all, how many people are so many hobbies. Everyone can invent a certain "tick-up" time. Sometimes you can even amaze what the human brain is capable of which is boring, but should not be surprised if your own hobbies will be strange for someone.

Look at people engaged in their favorite business, laugh from the stupidity of what is happening or emphasize certain things that you can find applications in your life. Here mostly assembled entertainment and informational and stylish video Content.

If you used water-based paint, it will be enough to wash the tool under the crane: the roller felt is washed until the water becomes transparent. And how to wash the roller after paint based on the solvent, we will tell below.

Required materials and tools:

• scraper or ridge
• solvent
• suitable containers, filters, bottles
• rag

Tip: If you have not completed work, wrap the crude tools in aluminum Foil.. If the bundle is sealed, the paint on the roller does not dry.

Process:

1. We carry out a scraper or crest with effort working surface cylinder roller to scrape as much as possible paint
2. We rinse the working cylinder of the roller in the solvent, which is filled with the tank of a suitable value (the cylinder of the roller must be fully fit in this vessel). I repeat the wash several times.
3. We drag the pile of rods with a rag.
4. I have a roller in the water, then we will drag again. If the paint has not been completely removed, we return the roller into the solvent.
5. We remove the holder of the working cylinder, last press the pile, and then vigorously shake the cylinder.
6. Allowing the entire moisture drain, we succeed in the working cylinder so that it is not touched upon a pile. You can, for example, skip the rope or wire through it, and then horizontally fasten it.

Instead of buying a new roller, you should spend 30 minutes to clean the old one. It will not only save your wallet from new spending, but also will be the right solution from the point of view of rational use of tools. Below will be 2 methods for cleaning the roller from paint. If you are just that finished repairs, we advise you to order cleaning after repair in our company.

Method 1 - Removal of waterfront paint

Method 2 - removal of oil paint

• Dress gloves. Take the pelvis and fill it on a 2/3 solvent.
  
  
• Remove the roller with the handle and put in the pelvis with the solvent.
  
  
• Need some time to give a roller to lie down. Then you need to ride it along the bottom of the basin. And at the end it's good to squeeze it.
  
  
• The actions described above must be repeated until the roller becomes clean.
  
  
• Manually remove paint residues. Dress the roller on the roller.
  
  
• Split the roller until it becomes wet. Protect your eyes using building glasses.
  
  
• Next, the roller needs to be packaged. Remove it into a sealed package.
  
  
• The solvent used can still be applied and more than once. Therefore, turn it back into the container and remove away from children and animals.
  
  

If you are engaged in sorting garbage, then be sure to get acquainted with how to dispose of roller, paint or solvent.

Order cleaning services in our cleaning company.

Precautions

Do not violate the recycling law. Take care of nature.

The water emulsion should be poured into the waste sewer, and not in standing.

What do you think about this? What else can you add to the above?

Acquisition good roller It will cost expensive. But, bought 1 time good thing, Be sure that she serves you for a long time. The main thing is to care for her. The required cleaning will increase the service life of your instrument. How quickly and easily wash roller From the remaining paint?

Water-based dyes tool cleaning

To clean roller From water-based paints, prepare a specialized solution. To do this, you need a bucket, cleaning agent and fabric softener. For any tool requires a separate capacity:

1. Pour the water in the bucket (it is not required to be cold) and dissolve the two glasses of softener for the fabric, all thoroughly shake.
2. When the tool is fully dissolved, the surface tension of water will change, and paint Starts to mock.
3. You can not apply a softener, but change it affordable tool For washing dishes, mixed with warm water.
4. Before placing roller In solution, try to remove a lot of paint from it, turning and clamping it in the construction tray.
5. Tray can be changed with old newspapers. Spread them in a couple of rows and ride the tool on the floor, clamping to newspapers.
6. Now omit roller in water tank and detergent. Keep tentatively half a minute, then get out of the bucket and thoroughly under water from the crane, a little warm. We wash off until the flowing water will not be clean.
7. As soon as the traces managed to get rid of, press the sponge of the instrument, so that all the water came out of it, then wipe it with a terry towel or turn the floor towels in a thick layer. When everything excessive humidity Hugs, hang dry.

To increase the operational period, the tool is much better to keep wrapped in the film so as not to settle dirt and dust.

How to wash oil based on oil

The method of cleansing the sponge of the tool from paint on an oil basis will greatly differ from the purification of the water-emulsion. With such a method, cleaning can not be used. Paint It cannot be dissolved in water - first of all it is necessary to use alcohol.

First, remove the maximum of the remains with newspapers. Spread old newspapers on the floor and ride on them roller.

Pour alcohol into specialized dishes, put the tool there. Rolled it in the container with the solvent until it is cleansing, and after hanging dry. When roller Drinks, it is best to close it with a film or roll in foil to secure from dust and dirt.

Clean the tool from acrylic

Clean the tool after working with paint on an acrylic basis is very simple. For these works, cylinders are used with a small pile, and they are much easier to wash them than fur.

Acrylic-based paints are most used for repair work and in domestic needs. Their composition has special substances that form the film. It is much better to wash off the water-based water-based paint based on polyacrylate until it frozen. If after completing the work, less than 24 hours passed, the cylinder can be laundered under flowing warm water. You can put a tool in warm water for 20 minutes to be free from traces.

After 24 hours paint It is already entirely freezing and laundering it without the use of additional funds will not be possible. You will need acetone, gasoline, White spirit.

Any solvent must be pouring into the container and place there. roller for some time. As soon as the paint layer softens, remove it with any cloth or scraper. Wash perfectly roller Under water until then, until it becomes clean.

It is possible to purify the use of specialized waterproofs for polyacrylate-based water-based water colors. They can be purchased in the store for construction. During the use of washing or any other type of solvent, first use gloves.

You can also refer to the help of a multifunction cleaner, which is also in any construction department. It includes gasoline and alcohol. This means can remove each type of paint.

If you suspended work on painting for a while, you can remove roller In a plastic bag, so as not to give paint to dry. The tool can be saved in the package, tightly knitting it and placing it in the refrigerator. There the tool can lie all night. Before applying in advance, pull it out of the refrigerator and give to lie down at a temperature of 20 degrees.

What can be done if the roller is laundered in a timely time and paint Already seriously dried? Throw out the dear tool very sorry. There is high effective method Resume dried pile on the working cylinder of fiber.

There are no problems with water paint. There is no: even drying easily meshes the primitive water from the crane. But with nitroemal or any other, made on the basis of the solvent, will have to be a little tinted.

You will need:

• solvent;
• excess fabric;
• scraper;
• any container.

Try the scraper to remove the more dry paint from the surface of the cylinder. Then pour the solvent in the cooked container and lower the tool there. When the sponge is softer, remove the tracks with rags and rinse the cylinder with water. The process repeat until all traces will be fully removed.

Then wash the tool in water with a cleaning agent and dry. Dry roller Again is ready to work - it can be used for coloring by any shade.

The acquisition of a high-quality roller will no longer. But, having bought a good thing once, you can be sure that she will serve you for a long time. The main thing is to care for her. Timely cleaning will extend the service life to your instrument. How to quickly and effectively wash the roller from the remaining paint?

Cleaning the tool from water-based dyes

To clean the roller from water-based paints, prepare a special solution. To do this, you need a bucket, cleaning agent and a softener for fabric. For each tool, a separate container is needed:

1. Pour the water in the bucket (it should not be cold) and dissolve two glasses of the softener for the fabric, all thoroughly shake.
2. When the remedy is completely dissolved, the surface tension of water will change, and the paint will begin to mock.
3. You can not use a softener, but replace it simple anemia For washing dishes, mixed with warm water.
4. Before placing a roller into a solution, try to remove the maximum number of paint from it, turning and pressing it in the construction tray.
5. The tray can be replaced with old newspapers. Spread them in several rows and ride the tool on the floor, pressing to the newspapers.
6. Now omit the roller into the container with water and detergent. Keep approximately half a minute, then get out of the bucket and rinse thoroughly under flowing water, slightly warm. We wash off until flowing water is clean.
7. After the traces managed to get rid of, press the sponge of the instrument so that all the water came out of it, then wipe it with a terry towel or turn into a thick layer of paper towels. When everything extra moisture Hugs, hang dry.

To extend the service life, the tool is best to store wrapped in the film so as not to settle dust and dirt.

How to wash with oil based

Way to clean the tool sponge from oil paint. It differs significantly from the purification of the water-emulsion. With such a cleaning method, water can not be applied. The paint cannot dissolve in water - it is necessary to apply alcohol.

First, delete the maximum residue with the help of newspapers. Distil the old newspapers on the floor and ride the roller on them.

Pour the alcohol in a special dishes, place the tool there. Rolled it in the container with the solvent until it is cleansing, and after hanging dry. When the roller dry, it is desirable to close it with a film or wrap in foil to protect against dirt and dust.

Clean the tool from acrylic

Clean the tool after working with acrylic paint is quite simple. For such works, cylinders are used with a short pile, and they wash them away from traces much easier than fur.

Acrylic paints are most often used for repair and in domestic needs. There are special substances in their composition that form the film. Best until she froze. If no more than 24 hours passed after the end of the work, the cylinder can be laundered under running warm water. You can put a tool in warm water 20 minutes to get rid of traces.

After 24 hours, the paint is already finally freezed, and it will be impossible to wash it without applying additional funds. To do this, you will need acetone, gasoline, White Spirit.

Any solvent must be pouring into the container and put a roller there for a while. After the layer of paint soften, remove it with any cloth or scraper. Rinse the roller under water well until it becomes clean.

You can use special places for acrylic paints for cleaning. They can be bought in the building store. When using a washes or any other type of solvent, be sure to use gloves.

You can also resort to the help of a universal cleaner, which is also available in any construction department. It includes gasoline and alcohol. This means you can delete any kind of paint.

If you suspend painting work For a while, you can remove the roller in the plastic bag so as not to give the paint to dry. The tool can be saved in the package, tightly knitting it and placing it in the refrigerator. There the tool can lie all night. Before use, in advance, pull it out of the refrigerator and give it to room temperature.

What can be done if you wash the roller in time did not have time and the paint is already thoroughly dried? Throwing out the dear tool is very sorry. There is a very effective way to restore the dried pile on the working cylinder of the fiber.

Problems get rid of OT water-emulsion paint No: Even dried easily meshes with simple running water. But with nitroemal or any other made on the basis of the solvent, it will have to tinker a little.

You will need:

• solvent;
• unnecessary fabric;
• scraper;
• any container.

Try the scraper to remove as much dry paint as possible from the surface of the cylinder. Then pour the solvent into the cooked container and lower the tool there. When the sponge becomes soft, remove the tracks with rags and rinse the cylinder with water. We repeat the process until all traces are completely removed.

Then rinse the tool in water with a cleaning agent and dried. Dry roller is ready to work again - it can be used for painting by any shade.