If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of its own Service Center, which has authorization and certificates from the world's leading manufacturers.

The further operation of the equipment depends on how the equipment starts in operating mode. In our case, an experienced employee of the Service Center will perform a test run at idle speed. Especially for our clients, we will adjust and adjust the equipment so that it is ready for the upcoming loads. After that, if the results of the check do not cause any claims, the tool is sent to its rightful owner.

What are we doing?

• check of the complete set (at opening it is checked whether everything is in place)
• assembly finished product(if necessary)
• checking adjustments
• oil refueling equipment
• control of lubrication in gearboxes and gearboxes
• product launch

Everything for the Client

• Once the tool is unpacked for pre-sales training, it is handled by a professional. Therefore, we can guarantee the quality of our services.
• You get equipment that is 100% ready for work.
• Competent commissioning results in excellent results in the future.

Important

When making a purchase of a gasoline tool, the managers of the Garden Mechanisms online store offer everyone the service of passing pre-sale preparation... If you wish, you can refuse this service.

In what cases are pre-sale preparation canceled?

• If you wish, receive the product in its original packaging and open / assemble it yourself.
• If the product is planned as a gift and traces of equipment operation are undesirable (leftover fuel in the tank, filled with oil, opened packaging).
• In case it is supposed to be transported further, which is impossible with the assembled product. For example, it is supposed to send goods through transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Presale cost

The price includes: unpacking and checking the equipment (at opening it is checked whether everything is in place), assembly of the finished product (if necessary), checking the adjustments, refueling equipment with oil, refueling, control of lubrication in gearboxes and gearboxes, starting the product. Oils and greases are not included in the equipment assembly cost.

Gasoline is poured minimal number. Approximate cost product assemblies can be found in the table. The cost depends on the degree of complexity of the assembly and the time spent on it. Terms, conditions and the exact amount of assembly / pre-sale preparation, check with the manager when placing an order. Free pre-sale preparation applies only to all products of brands and. Products from these manufacturers are marked with a special "Free Presale" badge.

Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and the complexity of the work. Check the terms and cost of this service with the managers.

Visitor reviews (0)

Instructions

Ask a question (faq)

Pre-sale preparation

Pre-sale preparation is a test of the equipment for operability. Only competent specialists are allowed to conduct it. The procedure consists of the following steps:

1. Inspection garden equipment and accessories to it.
2. Assembling equipment, if necessary.
3. Idling start.
4. Adjustment and tuning of equipment for the forthcoming loads.

High-quality preparation is the key effective work instrument in the future. Sales center staff guarantee the correctness of the preparatory phases that will provide excellent operational results.

When you shouldn't do pre-sale preparation

The preparation service is provided to buyers at their request. It should be abandoned if:

• the assembled product is not convenient to transport;
• the client wants to do preparatory work independently and does not want to remove the original packaging in the store;
• the instrument is purchased as a gift and must not have traces of pre-sale operation.

We always meet the wishes of our clients!

The pumping station AL-KO HW 3000 Classic (112845) is a compact and powerful device from Chinese engineers, created for domestic use.

Main scenarios of operation:

• lifting and supplying water from wells;
• pressure increase in private water supply networks;
• organization of a water supply system where it is not provided for by the project.

The simple and reliable design is easy to operate and does not require any special skills. You can install it anywhere, be it a separate room or an outdoor area, directly next to a well with a water source.

Obvious advantages

Many may be confused by the fact that the pumping station housing is completely made of plastic. In fact, if you do not conduct crash tests, its protective functions will last for several years of flawless operation. And, on the contrary, metal analogs often succumb to corrosive processes and fail much earlier. It is also worth noting that with the help of this pump, you can raise water from a depth of up to 8 meters, or, for example, increase the pressure of an irrigation unit in orchards and vegetable gardens, if the initial communication capacity is not enough. The model has an average performance and is not suitable for solving large-scale tasks.

The German family company AL-KO has been developing and manufacturing climate systems, air conditioners, equipment for water supply and ventilation systems, and garden equipment for three generations. Inexpensive pumping station(about $ 130) HW 3000 Classic will provide household needs of a family of 2 - 3 people, as well as care for a small summer cottage.

Compact and lightweight

The station is 44x27x50 cm in size and weighs 11 kg. It is easy to transport and does not take up much space. Plastic case guarantees the absence of corrosion, so the pump can be safely installed in rooms with high humidity... It works a little louder than a robot vacuum cleaner (76 dB), so it will not greatly interfere with comfort.

Comfortable minimum

The 650 W engine pumps 3100 liters per hour with a head of up to 35 m. This is enough for 2 - 3 points. The reservoir for maintaining the pressure and storing water is hydroaccumulator from of stainless steel volume of 17 l... It is quite enough to compensate for water hammer when the pump is turned on and off, but there is no need to count on a tangible reserve of water when the light is turned off.

In general, AL-KO HW 3000 Classic - great option for a small private house or summer cottage. Compact, powerful yet inexpensive pumping system.

Advantages: Quiet, economical

Disadvantages: Plastic case

A comment: Bought urgently in the first major chain store. It turned out to be in the neighboring one was 10% cheaper))). What was needed was not very powerful, tk. the well is 5 meters, the debit is rather weak, only for collecting the barrel and keeping it filled. (the borehole died on the second day, and there are two vibrators in front of it). I read reviews on close models of this manufacturer and realized that I got it. At the first start, it grabbed right away. But he caught the sand. It seems to have eaten. The machine immediately pleased with its relative noiselessness. The unit is much noisier in the house. I decided to check for auto shutdown by pressure - it did not work. The pump somehow got to the 2.5 bar mark and no further, it makes noises without stopping, although there seem to be no leaks. I decided that the problem is in the membrane, possibly due to the fact that the sand has caught. It is clear that the case is not guaranteed. While the machine is alive, I want to take it to an authorized service center for diagnostics, ... Read more on Yandex.Market

Advantages: Quiet, economical

Disadvantages: Plastic case

A comment: Bought urgently in the first major chain store. It turned out to be in the neighboring one was 10% cheaper))). What was needed was not very powerful, tk. the well is 5 meters, the debit is rather weak, only for collecting the barrel and keeping it filled. (the borehole died on the second day, and there are two vibrators in front of it). I read reviews on close models of this manufacturer and realized that I got it. At the first start, it grabbed right away. But he caught the sand. It seems to have eaten. The machine immediately pleased with its relative noiselessness. The unit is much noisier in the house. I decided to check for auto shutdown by pressure - it did not work. The pump somehow got to the 2.5 bar mark and no further, it makes noises without stopping, although there seem to be no leaks. I decided that the problem is in the membrane, possibly due to the fact that the sand has caught. It is clear that the case is not guaranteed. While the machine is alive, I want to take it to an authorized service center for diagnostics, let everyone stretch it out, clean it, replace the membrane and, as written in the manual, set it to turn off / on at the lowest bars. Recently I bought a lawn mower from this company - I liked it.
Added after a month:
He abandoned the well, constantly silting up and decided to install this station in the house instead of the 1000 watt Chinese. It perfectly supplies water to the second floor from a well from a depth of 5 meters, a horizontal underground route of 10 meters. I had to dig up the supply hose, they found a hole in it. Now it pumps well up to 3 bar, turns off and turns on after 15 minutes as the pressure drops to 1.6. I think over time to replace the entire supply line, because somewhere siphon, and at the same time insulate. Now you have much less energy costs. The power is only 650 watts.
Better to buy a similar model with a metal pump casing, because the plastic at the outlet is slightly cracked and water is slightly oozing from there. But it is less than the resulting condensate. All moisture evaporates in the pump room.