Inflatable mattress - useful and practical household item. It is used in the summer to relax on the sea, as well as as an additional sleeping place To accommodate guests.

During operation, openings often appear, which interfere with the further use of the product.

Pack the inflatable mattress at home - not difficult, The main thing on time to detect a hole that passes the air. The most popular brand today is Intex.

The company can be called the leader in the production of inflatable products for home use. However, the highest quality products are capable of breaking.

Usually, a special watch and a small glue tube comes with a model - a kind of repair kit.

Consider the basic rules of the repair of an inflatable product at home:

These rules help quickly patch the punctures and cuts of an inflatable mattress. If the hole is too big, it is recommended to contact the workshop. Competent operation of the product will help to avoid such situations.

How to find a hole in the mattress

The first step to solving the problem of a torn mattress - search for punctures. They are too small to discover them with the help of conventional air descent. To do this, there are several proven methods that help you save the situation.

Note! Complete with each inflatable product always comes a special pump for pumping the mattress.

It will be useful when searching for a hole, so if the pump is missing - it must be purchased.

If, with a constant sleep on the product, the owner seems that the mattress is descending the air, but no explicit holes can be seen - it is necessary to check the valve model.

Perhaps this element does not completely close the air outlet hole or a marriage occurred. If there are no problems with the valve - it is worth finding a hole.

Consider several methods to determine the puncture:

It is worth noting that the high-quality branded mattress is less pronounced than an affordable Chinese analogue. Therefore, when buying, consider the duration of the life of the product.

What can be sealed?

If there is no special strip in the configuration of the product, then the rubber mattress can be sealed by other materials.

Main replacement options:

1. Glue for PVC.. A classic moment is suitable as it, after drying it, it forms a film similar to rubber.
2. Rubber. For it, use patchwork from the bike tire repair kit. In addition, you can apply a piece of conventional thin rubber, taking the size of the margins with a margin.

   After repair, it is necessary to check: whether the mattress is blown away by pumping it with the pump.

Independent problem - repair inland partitions Products. With this damage to the surface, a hill is formed that prevents comfortable sleep.

Useful video

Related records

Inflatable furniture is popular in mind its convenience, ease of storage and transportation. But over time, the holes appear on the mattresses that air leaves.

You can eliminate damage on your own at home. Most often damage is associated with the inflammation of the mattress to the maximum. Manufacturers indicate the instructions that it is prohibited, but many violate this rule.

1. Rubber glue made of natural rubber desmocol.
2. Super moment Crystal from Henkel.
3. Uranus for rubber boats.

Do not forget that toxins included in the adhesive substances can harm the person and require careful and careful circulation.

It is worth remembering that the compositions for working with inflatable products are flammable and near you should not be open sources Fire or sparks.

How to make an intex inflatable mattress

You will need:

• scissors,
• glue,
• rubber patch,
• glue brush
• sandpaper,
• detergent or shaving foam.

VIDEO INSTRUCTION

You need to start with the search for damaged places, it is not easy. Usually holes leave pets or children who love to jump from the heart.

First of all, it is worth considering the seams, the joints of the surface and inland ribs.

1. Not in domestic conditions use the way: omit the inflated mattress into the water and look where air bubbles will go.
2. At home you can use soap or shave foam by applying it on possible places punctures, in the air outlet areas it will be bubble.
3. If you failed to find cuts, the mattress pour water with detergent liquid. From damaged places with pressing on the mattress, soap water will go out with a whistle.
4. When damage is found, a pin or sticker is applied to the cut.
5. What glue to fuck an inflatable mattressThe masters respond - to buy intended for the repair of inflatable things, the set of Intex company, includes materials for patches, and glue.

If a cut on the joints of the seams, the place is treated with alcohol, and then glued according to the instructions.

But in order not to spoil appearance, glue can be applied with inner.

1. The damaged area is pulled out through the valve hole and fasten the patch from the inside.
2. The glue takes a bit - apply a smooth layer on the patch and firmly pressed to the surface. Leave the mattress to dry at about 12 hours.

Another option for the reconstruction of the mattress:

1. Place of damage is treated with sandpaper.
2. Then impregnate with alcohol.
3. After that, pick up the size of the patch, apply glue on it and attach to the place of cuts. Instead of purchased patches, rubberized materials and polyurethane glue or the composition for working with rubber can be used.
4. After gluing patches, the mattresses are left under the press for 24 hours.
5. Next inflated and check how reliably it was possible to glue the patch and cut.

If there are several damage, they need to be close in stages, waiting until the previous seam will completely grab. If, after inflation, the air leaves anyway, it means that there are still cuts left or the input valve is loosely screwed.

If the problem is in the valve:

1. To test malfunctions in the valve hole, in the inflated mattress pour the shaving foam.
2. It will foam around the valve if there are damage in it.
3. Then the valve is twisted and scattered.
4. The end itself grind and handle silicone lubricant And return to the place. With serious damage to the valve, you will have to contact the workshop.

Video on the topic

Where to fuck an inflatable mattress

If you have this question, then with big cuts, punctures, separated by the seams better to call and ask for helping professionals.

It is difficult to correct the ruptures of the seams or damage to the internal partitions. The masters can come to your home and eliminate damage in place. And if a small puncture happened, cut, you can correct the problem yourself.

Companies and private masters are working, which specialize in the repair of such products. It is necessary to call professionals if the seams and cuts are more than five cm. And the inner partitions were broken away.

Inflatable PVC Mattress or Inflatable Bed useful thingAs for relaxing in nature, as well as a spare breakfast for overnight guests, and sometimes your loved one. But in addition to the convenience of Intex's inflatable mattresses or any other, there is a disadvantage, with them it is necessary to accurately contact them to avoid punctures, cuts or breaks, and this is relevant for both the velor top of the mattress and the bases of polyvinyl chloride. The puncture or gap is sometimes noticed with premature awakening from the tancing of the floor of the room. Or with an unsuccessful attempt to tightly pump the mattress after storage. Such an unexpected event immediately causes confusion, what to do, how to repair, how to stick or how to fix the inflatable mattress with your own hands? Where to find a patch? What glue glue? You do not have to look for a workshop! You can make an inflatable mattress with your own hands.

How to make an inflatable mattress with your own hands

First of all, you need to prepare the repair kit: glue for PVC, patchwork, sandpaper leather (fine grain), means of degreasing. Glue and patchwork come complete with each mattress, well, if they are preserved. Unused attached glue tube can maintain its content without drying 2-3 years. How to fix it and what better glue patches on an inflatable mattress? If glue is lost or dry, it will replace it, for example, polyurethane glue "Crystal" series "Moments". You can apply professional glue. PVC Mattress Shell is very well and quickly glued with polyurethane shoe glue (Desmalk, Bokikol, SAR, etc.). "Crystal" - also refers to polyurethane, but it is difficult to work with it, since, unlike shoe glue, the glue does not allow to make the thermoactivation of the adhesive film and, accordingly, requires more time before the start of operation of the mattress. It will not work quickly. You can bypass this drawback - violating the gluing technology described by the manufacturer and fulfill some conditions, namely: apply glue on both surfaces and dry completely, about 20-30 minutes, then either carry out the "activation" of the adhesive film, applies to one of the surfaces 5- 7% a solution of glue in acetone or ethyl acetate, or apply a thin layer of glue and drying "to lowlight" - when the glue will cease to be liquid, and folding the surface together, to surpassed. For gluing, the compression force is more important than the time under the press. This scheme allows you to use the product hour after gluing, but requires skill - to "catch" the active glue phase.

In the absence of payments, the material for their replacement can serve any inexpensive inflatable toy for children from PVC material. From the toy cut the patch in the form of a circle. Sanding paper is purchased in a construction store. Means from degreasing - alcohol or gasoline.

We are looking for hole, hole, puncture, gap or torn seam in the mattress. We must gain optimism and patience. I propose the following simple instruction By searching for puncture and repair of an inflatable mattress:

1. In a quiet room or room, the mattress is most reasonably tightly.

2. Listen and try to localize the leakage site.

3. Carefully study the area of \u200b\u200bleakage, for example, driving slowly palm at a distance of 1-3 cm from the surface to localize hole holes. A thin jet of air will "calm" palm.

4. If the hole or holes are noticeable, we mark them with a ball handle or a felt-tip pen.

5. Very small holes are sometimes difficult to notice, then it will be necessary to use soap solution, the bubbling place is also marked.

6. Intex mattresses have a sore place - this is a valve, so it is not always the lowering of the air the result of the puncture, the valve is checked as water with soap. Attention! Do not check the embedded pump valve or dry it thoroughly before switching on.

6. A patch of the required size is prepared, the edge of the patch must be no closer than 15 mm from the barrows.

7. Place of repair is dried, hesitating emery paper, the patch is also cleaned. A dial surface can be triggered with a cotton swab moistened in acetone.

8. We assign the boost to the place of attachment about supplying its contours on the mattress, this will allow you to gently apply glue.

9. Degrease the place of gluing and blow air from the mattress. To speed up, you can rearrange the hose on the pump or take advantage of the vacuum cleaner.

10. We apply glue to a marked place on the mattress and pay.

Place for glue

11. After applying the glue "Crystal", we make a pause of 5-10 minutes and strongly compress the patch and the surface of the mattress. Of course the mattress surface is not always smooth. Compression density When gluing can be achieved as follows: We try to put the cloth at the gluing place on a flat surface. Quickly without the formation of bubbles rolling the patch to the place of the gluing, put a piece of polyethylene on the pay, then a piece of fastener with a thickness of 3-5 mm, slightly more sizes Patches, and on top there is a cargo. It is better to work this sequence of action before gluing. After installing the cargo, it is necessary to click on the place of the gluing for 5-15 seconds and leave the gluing at one time for several hours.

Patch for patchwork

If you discovered a hole on velor, on a flower surface, first of all, you need to remove these villi from the zone adjacent to the hole. Around the hole should be cleared a small area of \u200b\u200bthe size of a little more than five-supported coins.

To remove a flocked coating, velor, pile, it is necessary to moisten with a solvent or a tool for removing the nail polish and wait for 1-2 minutes. The adhesive mix of the pile with an inflatable mattress will soften a little and then the whole layer can be easily considered a blunt knife or spoon.

Formed harsh, once again rub the solvent and remove the remnants adhesive Basics Vellar coating. After drying, we apply glue, we wait, we apply a latch, press. For details about the right gluing, see below ...

1. Rate damage and prepare a place to repair an inflatable mattress. Gently straighten the affected cylinder site on a flat surface. If there is no such, then put the board under the cut.

2. Remove the glue and tape of transparent material from the repair kit.

3. Clean the place of gluing from dirt and degrease it with a 646 solvent. You can also use acetone, or at worst, in field conditions - alcohol. I do not advise to clean the material with emery paper - it can only harm it.

4. Verify the piping on the cut and draw the place of the gluing a pencil or handle

5. Cut the patch from the material strips desired size included in the repair kit. The patch can be any form, but better if it is round or oval. In the field, you can simply cut the corners from the rectangular billet. Diameter or maximum patchwork length must be 3-5 cm more than the length of the cut.

5. Singing the contents of the glue tube to the place of damage. With the help of a tassel uniform, thin layer apply glue on both bonded surfaces. Give adhesion to dry.

6. After 10 - 15 minutes, repeat the same procedure and leave the glue again.

7. After 5 minutes, you can begin actually the gluing itself. Five minutes - conditional time. It depends on temperature ambient, glue storage time, and even from humidity. Touch the glue - it should dry, but stick slightly.

8. For the "activation" of glue, the gluing site and the patch must be heated. To do this, you can use the hair dryer for drying. Remember that the place of the gluing must be heated, and not to light! It is necessary to carry out this operation, it is necessary enough that glue during this time is not drying.

9. Now the glued surfaces must be applied one to another.so that the air bubbles do not remain under the patch and pushing it well and roll the solid roller. If there is no one at hand, you can use any techniques: knife handle, can, spoon, etc.

10. Not bending material at the place of gluing, gently fold the mattress (boat) and leave to dry at least one day.

Watch the video How to stick a bed with the Intex repair kit:

Each modern family has an inflatable mattress. He serves a bed for suddenly visiting guests, it is possible to take it on vacation: it is useful for swimming, it can be used as a bed, it is convenient to sunbathe on it.

But sometimes on vacation there is a problem of blowing air, let's see how to solve it,how to make an inflatable mattress.

In contact with

Product Features

Inflatable mattress - this cavity from a special material various sizewhich, as a result of filling with air, is converted into a sleeping place.In size, they are single and one-time, but there are wider inflatable beds. Also differ in height - there are large models up to 50 cm, and small - up to 23 cm.

They firmly entered the use of students, nomadic brigades and those who do not have permanent housing, are forced to move frequently. Also well have an inflatable bed, if the area is small, to clean it in the closet in the morning.

The presented products are made from polyvinyl chloride - this is a sufficiently soft elastic material, but unfortunately, the prone is easy to damage.

Therefore, every home should know how to implementrepair of inflatable mattresses.

For those who do not tolerate the chemical smell, are manufactured environmentally friendlymattresses without glue and smell.

They are often bought for children or older people who are painfully reacting to various chemical components.

Attention!High mattress can be used as a permanent bed, checking it with a covering. In this form it looks like a regular bed.

Such products are indispensable on vacation, you can sleep, sunbathe and swim.

Troubleshooting valve

If there are no damages in the form of holes and cuts, and it gradually produces air, it means that the reason lies in the valve fault. If arepair workshop inflatable mattresses It is far away, then you can troubleshoot yourself at home, following step-by-step instructions:

1. Fill the product with air and lubricate the valve with soap foam. If it passes the air, the foam will appear around it.
2. Then you need to remove the adjacent valve, and then the rubber gasket.
3. The valve end must be glued with thin sandpaper and lubricate with silicone lubrication.
4. Then place the valve for your previous place and pump the product again to check.

Serious valve breakdown can be eliminated only in the workshop. With such a simple task,how to fix an inflatable mattress, any owner will cope.

How to discover puncture

Prerequisite requires studying the issue,how to find a hole in an inflatable questionAfter all, it is this ill-fated nuisance that becomes the cause of spoiled rest and sleep. There are several methods for search:

1. Tactile. This puncture detection method has no girlfriend. The mattress needs to be done well and spend hands over its surface at an altitude of 2-3 cm. In place of finding a hole of the hand will feel the jet of air. To increase sensitivity, hands must be mixed with simple water.Also, the place of puncture can be detected on rumor - hissing and whistling will be heard from damage.
2. Soapy. Divide strong soap mortarAnd then apply it to the surface with a sponge. In the location of the puncture will be formed by bubbles, mark it with a marker.
3. Submersible. Small mattresses can be simply immersed in water container and see what space air bubbles will be released from.
4. Water. In this method, water is poured into the mattress - its small amount is used. The mattress is required to be shaking and then inspect. If a wet spot is discovered on its surface, then in this place is puncture.

Tip!It is necessary to start looking for damage from the valve, and then from the side seams: they are most of all suffer from overload. Next, you need to check the lower part, which comes into contact with the ground or floor, because it is more prone to puncture.

Preparation for repair

Before starting repair, it is necessary to prepare its surface to work. First, the mattress must be blown away and dry carefully.

You need to know how to confuse mattresses. IN simple models It is enough to open the valve and wait a certain time. It is impossible to prescribe and might.

In other models, this is done differently.

For example, you need to know exactlyhow to blow a mattress BestwaySince it has a special flap, which does not allow the mattress to be blown away if the valve cover will accidentally open.

In this case, the lid is required to open, and move the plate to the side, then the air will go out.

Now the points of punctures must be deguted with alcohol, acetone or gasoline. Flock coating will have to be deleted, that is, carefully cut off. Rubber or plastic is not required to additionally process and clean.

Preparation of patch

In the manufacture of patchwork you should knowthan you can make an inflatable mattress. If there is no material suitable for repair, it will suit any thin rubber flap. You can take a piece from a car or cycling chamber, a children's toy or any rubberized item. You can also make a piping of cotton fabric, pre-impregnated with rubber glue.

What glue is suitable for repair

For repair, it is important for repairwhat glue to fuck an inflatable mattress. Many adhesive substances, each intended for work with a specific type of material.

Specialists advise you to choose universal varieties, rubber and PVC composition.Drying, the glue should form a durable, elastic and waterproof connecting layer.

The glue must be used in the minimum quantities so that the layer is thin - the excess will not help glue the rubber parts. For repair it is recommended to use the following types of glue:

1. Moment. This is a universal glue, it fastens almost any materials: rubber, plastic, PVC, fabric and much more.
2. Polyurethane shoe. This is a reliable glue, it forms a solid layer between gluing surfaces. Only with applying the glue surface should be connected and dried with a hair dryer.
3. Glue for PVC. Inflatable mattresses are often produced from polyvinyl chloride, so the appearance of the glue is best suited for them. It is necessary to glue, catching 2 layers on both surfaces, after which the composition is maintained for 20 minutes.
4. Super moment. High-speed adhesives are also suitable for repairing this product, but they contain substances damaging the surface.Its main disadvantage is premature solidification and fragility during the operation of the product.When the mattress is dry, it is possible to detect the cracking of the adhesive mass, which will again lead to the need to make repairs.
5. Glue from the present rubber. When gluing does not leave stains. It is necessary to apply two layers of glue to the surface, let him dry, after which the surfaces to connect and put the cargo on them for a day.

Tip!If there is no rich selection at hand, you can handle any glue. It is important to follow the instructions for gluing surfaces.

What is needed for repair

Now you should talk abouthow to make an inflatable mattress at homeWhich for this will be required tools and tools if there is no special repair kit, then any technicraft materials will be suitable:

• universal glue "Moment";
• thumb rubber flaps;
• alcohol or acetone;
• fabric gloves;
• bruster for glue;
• marker;
• soap or shampoo;
• water;
• thin sandpaper.

The listed materials are almost always in the house, so it is not necessary to acquire a special kit for repair, because it is quite expensive.

How to make a puncture

Finding and denoting all defects, you can start repair yourself. We offer step-by-step instructions,how to glue an inflatable mattress:

1. Remove air from the mattress, straighten and gently decompose the repaired area on the level location.
2. Sandage gently clean the places of gluing on the mattress and on the pay.
3. Sliding areas need to be deguted to any existing means.
4. On the prepared surface of the product and patch the tassel, smear the glue with a thin layer and give it seeking minutes 10-15.
5. Put the pay on the damaged part and give to dry the glue during the day.

Important: You can put a small cargo on the pay. A day later, the repaired mattress pumped by air, tightness check, lubricating the repair place with soap foam.

There is another significant moment,how to make an inflatable mattress from velor sidebecause in this situation the above repair technology is not suitable. This refers to the mattresses of the popular one-year brand and other manufacturers. To impose a patch on such a product, you need to do this:

• clean the velor surface to the size of the patch. To do this, moisten the surface with acetone and consider the pile of a blunt knife;
• a smooth surface to rub acetone once again, and then glue can be applied;
• give dry glue, impose on the surface in the same way prepared by the pay. Press it to the surface of the mattress and give to dry during the day.

Tip!What and how to make an inflatable mattress intex? The pay can be applied on the inside. In this case, the area with damage is pushed out through the valve and is stuck in the usual way. Inside the surface rubber and additional processing does not require.

Repair of large holes and cuts

How to put a hole in inflatable mattress if it is more than 5 mm. In this situation, the repair with your own hands can be impossible, it is better to entrust it to experts.In specialized workshops Repair of the inside of the product, the glue of large cuts and holes is carried out on special equipment.

Repair damage to seam

Difficult questionhow to make an inflatable mattress on the seam,specialists will solve.

House repair may not work, so if there is a workshop nearby, then it is better to take a mattress to the master. Damage to the seam is eliminated from the inside of the mattress.

To do this, via the valve is squeezed by a broken seam area, and then you can start repairing, following the instructions:

1. Water with alcohol rubber surface for degreasing.
2. Leave for a full drying - during this time cut a suitable pay, which is also wiped with alcohol.
3. Lubricate the sides connectable with glue and attach them to each other.
4. Press them tightly, leave for 12 hours to dry.

How the glue will dry, turn the mattress and pump air.This is necessary to test the quality of independent repairs.

Prevention of damage

So that the mattress is no longer damaged, it is recommended to follow the following rules of operation:

• Before throwing the mattress to the ground, remove all the stuck objects or beds under it dense fabric.
• Do not pump the product too much.
• Protect the product from the claws of pets.
• You can not drag an inflated mattress on the ground, especially when a person is on it.
• It is forbidden to jump or sharply sit on the mattress.
• The air must be released slowly.
• Wash with soap solution.
• Before folding the mattress and put in the closet, it must be perfectly dry.

As can be seen from the above seen,how to make an inflatable bed - The process is completely simple, with the repair of the product you can fully cope with yourself. Even better - not to allow such damage. But if the puncture happened, you should not despair - everything is in your hands.