It often happens that store glue comes across of not very good quality and, therefore, its characteristics do not satisfy consumers.

The question arises about the choice, you can buy a modern and very high-quality adhesive material, but in this case, you will have to pay a certain amount of money, and often a considerable one.

And, of course, there is no guarantee that this option will correspond to its main characteristics.

It often happens that the money has already been spent, the glue has been bought, the work has begun, and the quality of this material leaves much to be desired. As a result, the wall covering deteriorates, as well as the surface itself.

If you decide to update your wallpaper at home, then you need to choose a quality option. Can buy good remedy for pasting walls in a special store or prepare yourself.

The process is simple and does not require material costs. Such glue is called paste, it contains starch and flour. Despite the great abundance special mixtures for wallpaper, however, more preference is given to just such a product that is made at home.

It will undoubtedly suit those who want to receive good quality and an impeccable result, practically without investment, material costs.

The glue is colorless and does not stain the wallpaper.

Starch glue is often used in such cases as:

• for pasting wallpaper;
• for gluing paper bindings;
• for insulating window frames;
• to create various types of applications;
• for priming walls;

It is worth knowing that it is better to carry out work with a freshly brewed solution, since it is much more pleasant in consistency and has more pronounced sticky properties.

However, if you have cooked a lot of glue, then it can be stored in a plastic bag, in the refrigerator, and for quite a long time, this is very convenient.

In addition, such adhesive base is safe if it comes into contact with the skin; it is enough to wash it off with water.

VIDEO ON TOPIC

In order to need materials such as:

• bucket;
• potato starch);
• warm water;
• gauze;
• a whisk to stir the glue.

How to boil starch glue

1. It is necessary to prepare the paste before use, since it loses its properties during long storage.
2. Before starting to prepare the glue, sift the starch through a sieve. This is necessary in order to get rid of lumps and various small contaminants.
3. Next, fill the starch with warm water and mix it thoroughly until the consistency of thick sour cream.
4. Pour boiling water (about 80-90 degrees) into the resulting gruel with a thin continuous stream, which will brew our paste.
5. Knead it with vigorous movements until smooth, preferably with a whisk. When solidified, the solution begins to thicken, so you need to add water.
6. Strain hot starch glue and heat in a water bath.
7. Then you need to pass it through a sieve in a colander.
8. After it is cooled, but stirring occasionally, so that no foam forms on the surface. Experts recommend passing the already cooled paste through a sieve again so that the solution is completely homogeneous. After that, it is ready to use. To keep the wallpaper better, you can add a little woodwork or PVA glue to it.

Do-it-yourself starch glue step by step

This mixture has many advantages.

1. It is absolutely harmless to children and easy to use.
2. 100% natural and contains no chemicals.
3. This adhesive is safe for allergy sufferers and does not irritate the skin. Paste is used in children's institutions for the manufacture of applications. Also when made using the papier-mâché technique. The main application is wallpapering.
4. The glue can be applied to any type of wallpaper. After applying it, if necessary, the wallpaper will be removed very easily and quickly. To do this, you just need to moisten the walls with warm water.
5. They can be used to prime the walls - after drying, the surface will become even and smooth. Saves finances and can be prepared in any quantity and without much effort.

Waste paste can be easily removed from the wall using hot water. It is very convenient to use, it does not leave extra stains and has no color. It can be used when working even with very thin white paper, and not be afraid that unsightly yellow spots will then appear on the surface.

The use is relevant to this day. This is not surprising, because there are a large number of advantages, which were mentioned above. This glue has excellent properties and is ideal for wallpapering. Besides, this material very easy to use, it is not very liquid and not very thick.

If you decide to update your interior interior without investing large sums of money, then using homemade paste will help achieve this goal. All ingredients are freely available in any household and grocery (starch) store, so you can make it at any time convenient for you. Moreover, you do not need to save it when using it, because you can always quickly weld a new one.

Not a single renovation, whether in an apartment or a house, is complete without glue. Today, the choice of adhesive mixtures in the store is very, very large. But, their quality sometimes leaves much to be desired. Many builders make homemade glue at home directly from available tools. However, we note that in each case the composition of the glue may be different, because it can be suitable for different materials for example one for paper and one for wood.

In this article, we'll take a look at various homemade glue mixes that can be easily made at home without spending a lot of money on making it. So let's go!

Traditional flour paste recipe

Such glue is used quite often in a variety of situations. Most often, they resort to cooking itwhen urgently needed, for example, when the glue from the store runs out, during a wallpaper update. Therefore, in order not to run to the store for a new pack (which, apparently, will only be used by 1/3), it is easier to make your own glue, which will not be a drop worse. Plus, this glue is not toxic, and is completely safe for use at home. The main component is flour, which is sure to be in every home. The relationship of the glue is as follows - 1 liter of glue is enough for 2, 3 rolls of wallpaper.

Prepare the following components:

The container in which the glue will be mixed;

6 tablespoons of flour per liter of water;

Water, according to the amount of flour (1 liter per 6 tablespoons).

You need to prepare the glue as follows:

1. Heat water to a boil;

2. In a separate container, stir the flour with cold water before the formation of a mixture, like liquid sour cream (and always without lumps);

3. Now, pour boiling water into this mixture in a thin stream, while constantly stirring it with a spoon;

4. After mixing, boil the mixture again and leave to cool.

The finished consistency should resemble a thick jelly. Similarly, you can prepare such a glue using starch instead of flour, and it will not differ a bit from flour. In some cases, this glue can be even more effective than store-bought glue. If you are afraid to apply such glue to wallpaper, test it on small pieces of wallpaper by gluing them together. In general, this adhesive can be used on any wall surface, paper to cardboard and other types of paper. In short, experiment and see everything with your own eyes.

Homemade PVA glue

The second, no less popular and effective, is PVA home glue. If you think that glue is made at a factory using some special technology, you are mistaken, because exactly the same glue can be made at home. Agree, this type of glue is one of the most common. It is used in bothin the office and construction industry, that is, in fact, it can be called a universal glue. Well, it's time to move on to how to make it all the same. This will require:

1. Distilled water in a volume of 1 liter;

2. Photographic gelatin (can be purchased at any camera supply store) in an amount of 5 grams;

3. Pharmacy glycerin (4 grams is enough);

4. Wheat flour, about 100-150 grams;

5. Ethyl alcohol in a volume of 20 ml (can be bought at any pharmacy).

Conventionally, manufacturing can be divided into two stages:

it preliminary preparation, during which gelatin must be soaked in a glass of water;

And the cooking process itself.

So, a day after the gelatin swells, you can start making PVA.

∙ Place distilled water in a water bath, in a container. Next, add gelatin to it, and stir with flour, stirred in a little water (again, without lumps);

∙ Bring the mixed consistency to a boil, but do not boil in any way. Notice how the mixture becomes thick and white, like sour cream. Stir it so that in the end the glue is homogeneous, without lumps.

∙ All that remains is to add glycerin and ethyl alcohol. Stir constantly and stir the mixture again so that it is as thick as possible. The stirring time should be in the order of 10 minutes, so don't assume that two stirring with a spoon will be enough. You can use the glue only after it has completely cooled down.

How to make wood glue with your own hands?

This glue is ideal for wood. Also, it effectively bonds paper and cardboard, other cellulose materials, and in some cases even plastic. However, this glue has a couple of disadvantages:

Firstly, it does not last too long in liquid form and is perishable;

And secondly, it has just a disgusting and pungent smell, with which you can only put up with it.

Partially, this problem disappears if it is previously boiled and made into a gelatinous mass. Then, its validity period increases, and if necessary, you can cut off a piece of the required size, heat it up over low heat, and operate it. There are several recipes for making such glue. The most basic and affordable for you, we will describe below.

Method one.Take regular wood glue. Grind it and soak it in water until it swells completely. So, it will soften and become like jelly. In this same state, place it in a melting pot called oilcloth. The easiest way to make such a container is from an ordinary tin can (condensed milk or canned pineapple). Load the gelatinous mass into such a jar, and put it in a water bath (this should be very low heat). Stir the warming mass with a wooden spoon or stick (for example, from sushi). You need to stir constantly, because in case of burning, the mass will acquire a yellowish color, while losing its adhesive qualities. After the transition of the mass to liquid state, dilute it with vodka with the following ratio: 720 grams of glue needs 950 grams of vodka. Then, for every 100 grams of glue, add 12 g of powdered alum. The resulting homemade wood glue will have a high degree of adhesion and excellent water repellency.

Method two.In the same glue, mix wood glue and water with a ratio of 1 to 1. After the mixture begins to boil, it will thicken a little, and at this stage it must be poured into a ceramic mortar and pounded with a pestle until a gelatinous mass is formed. Then, put the glue on a plate, refrigerate, and cut into desired pieces. If necessary, mix the glue with vodka in a different ratio - 720g (glue) / 360 g (vodka). Bring the mixture to a boil, then cool and use it.

Method three.Boil a mixture of one liter of water, a kilogram of wood glue, and one liter of 9 percent table vinegar in a water bath. Then, stirring this consistency, gradually add a liter of vodka to it.

Method four. Dilute wood glue with water in a ratio of one to one. Heat it in a water bath until the mixture is completely thickened. Then add one part glycerin (equal to the original glue). Put on low heat and wait until the water evaporates completely. All that remains is to put it in a mold and dry the glue. Stir 1 to 1 with water before using.

Homemade Styrofoam Glue

Recently, the need for such glue has become acute. This is due to the fact that cases of wall insulation, sound insulation, in which it is necessary to use foam plastic, and other materials like it, have become more frequent. You can also use glue from a store, but, as a rule, it is afraid of solvents like acetone. Therefore, you can also use the wood glue above.

Otherwise, you can make glue, especially for foam, from homemade cottage cheese. To do this, you need to mix slaked lime with homemade cottage cheese in equal proportions, stirring, to get a homogeneous mass. Try to use this glue immediately after mixing, as it hardens rather quickly.

Casein based adhesive for wood and leather

For gluing wood or leather goods, casein glue will be very effective. This kind of homemade glue is also suitable for other materials, for example, for gluing puzzles. But, in order to make such a glue, you need to get the casein itself, so the whole process of preparing the glue must be divided into two stages.

The first step will be to isolate casein from the curd. For this, the curd must be fat-free. To get such a cottage cheese, it can be soaked in a soda solution, while you need to dilute 1-2 tablespoons of soda per liter of water (about 15-20 minutes). After, it must be thoroughly rinsed. running water, squeeze and dry until firm. Now, it remains to prepare a powder from it, which will be dry casein.

In the second step, you need to prepare the glue itself. To make it, you need to pour casein into a flat dish, pouring a thin stream of water into it. Remember to stir the mixture. The ratio will be as follows: for one part of casein, you need to take two parts of water. It is necessary to get a thick mass. Now, the most important part of the preparation comes, this is the mixing of the given mass. The better and better you mix the mixture, the better the glue will turn out. In general, this procedure will take at least 30 minutes, although using a mixer it can be done faster. As a result, such glue will perfectly glue wood fragments, as well as leather, for example, shoes. You need to use such glue as soon as possible, within 3 hours after production.

Handicraft glue

Many housewives are engaged in needlework. Quite often they make fabric flowers, which require special fabric glue. You can also make this glue yourself at home. There are several simple ways that we will now consider.

Method number 1

This will require 3 tablespoons of flour and a glass of water. Dissolve the flour with a little water, heat the rest of the water, and pour the flour mixed with water into it in a thin stream.

Method number 2

In the second method, we need a tablespoon of flour, also a tablespoon of starch, 1 tbsp. l. sugar and a glass of water. Stir all the ingredients and bring to a boil, making sure that no lumps form.

Method number 3

You will need a bag of gelatin, two tablespoons of flour, a tablespoon of sugar, and a glass of water. Soak the gelatin in 1/3 cup of water overnight, and in the morning in the rest of the water, mix the gelatin and the rest of the ingredients. Bring to a boil, and then store the glue only in the refrigerator.

Dextrin based adhesive

For practicing with paper, various kinds of application, it is far from always possible to use PVA glue. For example, a dextrin-based adhesive that is easy to make at home is ideal. In order to get dextrin, you can use starch. Take a bowl, pour starch into it and put it in the oven over low heat. Gradually increase the oven temperature to 160 ° C and hold for about an hour and a half. So, the starch will break down and turn into dextrin.

For the glue, you need 3 tablespoons of dextrin, 5 tablespoons of water, and a spoonful of glycerin. Mix the dextrin with water, heat the mixture to completely dissolve the dextrin, and only then add the glycerin. Stir, and after cooling, you get a ready-made glue.

Acetone and linoleum based adhesive

To make homemade glue at home, you can read a lot of recipes, and one of the cheapest is such glue. So, to prepare it, you need to take the old linoleum, cut it into small pieces, and put it on the bottom of the vessel. Pour it with acetone, in a ratio of 1 to 2 parts (1 part linoleum, 2 parts acetone). Then, seal the container tightly, and leave for 12 hours (preferably in a dark place). After this time, the glue will be ready. It can be used to glue metal, porcelain, wood or leather.

Universal moisture resistant glue

Quite a simple recipe for homemade all-purpose glue that is moisture resistant. To do this, it is enough to take wood glue, soak it in water until it is completely swollen. Then, bring to a gelatinous state, pouring linseed oil into the container.

Well, as you can see, there are a lot, very many ways to make homemade glue at home. In addition, each glue is suitable for use with one or another type of material. Plus, these are not all recipes. homemade adhesives, because there are really a lot of them.

Polyurethane foam. Help in choosing. Application secrets

Preparing for repairs is a time consuming and responsible business. Everything must be carefully prepared necessary materials, think over what exactly is worth purchasing and in what quantities. Some materials, however, do not need to be purchased, it is much easier to prepare them yourself.

A cup of freshly made homemade wallpaper glue

First of all, this all applies, of course, to glue. If it is unrealistic to make wallpaper personally, to put it mildly, then you can make wallpaper glue with your own hands - and replace it with the one you bought with equal success. The main thing is to be aware of exactly how to do it.

What is the glue made of?

In general, wallpaper glue can be made with your own hands from the many different components at hand. Previously, glue in general for wallpaper (and not only wallpaper) was prepared, for example, from the skin and cartilage of animals, their fish glue, and so on. But the most common varieties in modern times are varieties made from starch and flour.

Both options are quite equivalent, both are almost equally beneficial, because it is entirely up to you to choose from them. Moreover, in both cases, the properties of flour and starch can be significantly enhanced by various additional components.

Cooking with flour

It is not difficult to make good wallpaper glue from flour with your own hands. It is important to understand what kind of flour to make it from, because not every one is suitable. Better to take rye and wheat, the rest will not "glue" the surface of your wallpaper so well. If you choose between these two extremes, then perhaps wheat for wallpaper will be a little better. Let's consider three simple options.

It is from such a fly that an excellent glue solution will come out.

The first flour option

To make the simplest wallpaper glue with your own hands, you must follow the following steps:

1. Take required amount flour. Expect to need about two tablespoons per liter of water.
2. Pour warm water into a convenient and spacious container, then stir the flour thoroughly, but so that there are no lumps.
3. All this is put on a slow fire and cooked for about five minutes.

This way you can weld a light paste, which can glue not very heavy paper wallpaper.

Flour paste

Second flour option

The second option, prepared with your own hands from flour, is similar in general principle, but a slightly stronger adhesive comes out for any wallpaper. It is necessary, in order to cook it, do the following:

• Take the required amount of flour, but, this time, the ratio will be different - one part to about three parts of water.
• Take a large container. It can be a large metal basin, or a spacious and convenient bucket.
• Flour is first poured into this container, then water is poured in an ordinary, unheated state.
• The container is placed on the stove (that is why it is so important that it be metal), a low fire is turned on, then, with constant stirring, everything is brought to a boil. It is important to avoid clumping and clumping, otherwise the quality of the finished product will be insufficient.
• When everything boils, the container is immediately removed from the stove, carefully filtered and cooled - the composition is ready.

To check the quality, you need to pick up with two fingers. If it flows down a little, then it came out good, if not, then you need to add a little warm water and stir.

A well-worn brush, but back in service and ready to work with glue

There is another method of checking - you can squeeze a small amount of the resulting glue, then unclench your fingers. It is necessary to feel the elasticity and stickiness, then the composition will be satisfactory, if not, then it is necessary to add a small amount of the same flour and repeat until the result is satisfactory.

The third flour option

This option differs in that it is already based on turpentine. In this case, the order of actions to cook it will be as follows:

1. It is necessary to soak a kilogram of rye flour in two liters of water.
2. Then add about nine liters of heated, but not boiling water to this mixture.
3. All this together in a thoroughly mixed form is brought to a boil.
4. Then everything is filtered so that the most homogeneous mass comes out.
5. 600 g of turpentine is added to this mass, then everything is stirred.

Turpentine can be quite difficult to get, because this option, although it is good in its adhesive properties, is rarely used.

Cooking from starch

A small hill of the desired starch

First starch option

The second, slightly more difficult, but, on the other hand, somewhat more effective option is a wallpaper glue made from starch. Making it a little more difficult, but also quite simple. There are two main recipes. The first is based on alcohol. It is necessary to do the following sequentially:

1. Mix 3/4 kg of potato starch in 200 g of wood alcohol or, alternatively, denatured alcohol.
2. Pour one and a half liters of water into the mixture and mix thoroughly so that there are no even subtle lumps.
3. Another nine liters of water are poured into all this, but only this time boiling water.
4. The whole mixture is brought to a boil.
5. Separately from all this, a third of a glass of alum is dissolved in a glass of water, then this solution is added to the boiling mixture and stirred thoroughly.
6. The composition is removed from the stove, cooled and filtered.

Starch paste

Second starch option

The second version of starch is based on other minor components, but it is also quite simple to make it yourself. The following is done:

• About 40 g of calcium chloride is diluted in 600 g of water, everything is gradually brought to a boil.
• Separately from this mixture, 400 g of water is mixed with the same amount of high-quality potato starch.
• The two mixtures are brought together and mixed thoroughly so that the mass is as homogeneous as possible.
• The finished mass is heated, then about five liters are added to it hot water... All this is boiled again, after which it is cooled, if necessary, filtered.

It makes a very good starch adhesive that is great for damp walls, while the previous version was more suitable for normal walls.

Is it justified

The question that arises in this case is whether it is reasonable at all to make glue with your own hands? Yes, it will be good, but is it generally justified? The answer to this question is ambiguous. On the one hand, many people are especially pleased to do something with their own hands, they like that it was all done by them from scratch, they can be proud of it. This is the first factor.

The second factor is the desire to save money. After all, they already have all the components at home, so why spend unnecessary money and buy things that seem to be unnecessary?

The composition is already ready for work, bring the wallpaper

But everything is ambiguous. The point is that the result will be really good. But is ordinary glue better? Not at all. If you are eager to save time, then it is easier to go to the store and simply buy there. a good option suitable for necessary wallpaper... Moreover, the choice of brands in the end you will be really impressive. But in general, this is all entirely up to you, only you can know which of these factors is still the most suitable for you.

The word "paste" came to us from Germany, it means an adhesive made from flour or starch and water. In spite of wide choose a variety of adhesives in stores, today the paste does not lose its popularity. After all, it contains available natural ingredients, thanks to which this mixture does not pose any danger to health. It does not cause allergic reactions and is absolutely harmless even for young children. Knowing how to cook flour paste will help you both during the repair process and when doing needlework.

Safe glue for adults and children

Kleister has quite wide range application. Perhaps the most popular of its uses are renovation work... With the help of paste, gaps in wooden windows are sealed, and the walls are primed and pasted over with wallpaper. A home-made product is usually of the same quality as industrial mixes.

The paste is able to firmly fix even heavy wallpaper on the wall, without leaving stains on it.

This composition is also used in the field of horticulture and horticulture. When planting small seeds, the paste is applied to strips of paper, then sprinkled on them planting material, dried, placed on the beds and sprinkled with soil.

The paste has a simple and environmentally friendly composition

Thanks to the safe natural composition of the paste, it is used in kindergartens in creative classes to perform applications and other work with paper. In general, this adhesive is very actively used in various types of needlework: scrapbooking, decoupage, thread and textile crafts. And in the manufacture of artificial flowers, the fabric is impregnated with liquid paste to give rigidity.

If a child wants to taste the paste or gets his hands dirty in it and then rubs his eyes, this will not harm his health.

Kleister has found application in the theatrical art. It is used to create papier-mâché props, which serve as decorations in productions. They turn out to be lightweight and at the same time quite durable. Librarians use paste to restore damaged book bindings.

Photo gallery: wallpapering, seed preparation and other uses of flour and water glue

The composition is suitable for textile crafts The composition is used for gluing small seeds Paper wallpaper adheres perfectly to the paste The paste is ideal for papier-mâché crafts To make flowers, the fabric is pre-impregnated with paste and dried.

How to cook paste correctly

What can it be made of

You can make a paste from wheat, rye or corn flour. It is better to choose flour not of the highest, but of the second or third grade, as a last resort, take a product marked “ general purpose". This is due to the fact that coarse flour has high level viscosity due to the high content of bran particles. As a result, it holds the material more firmly. Also on sale is whole grain wheat flour, which even received the name wallpaper, this is an ideal basis for paste. It can be replaced with any other variety, but be prepared for the fact that this will negatively affect the astringent properties of the composition.

Photo gallery: the most suitable flour for making glue

Rye flour glue sticks better, but may leave marks on light-colored surfaces Cornmeal makes an excellent tenacious paste. When cooking wallpaper paste, use whole grain - wallpaper - flour, not a premium product

Also often, like flour, starch, potato and especially corn starch is used for the preparation of glue. Starch paste is absolutely transparent and is used, as a rule, on surfaces where even the slightest traces cannot be left. It is applied under light wallpaper, to the ceiling. However, repair specialists say that flour paste is much more tenacious.

It is important to consider that wheat flour is used for light surfaces, and rye for dark ones. Doing so will help you avoid staining. In addition, rye flour paste has better fixing properties. Therefore, this component is often used for gluing heavy vinyl wallpaper.

What else is worth adding

In addition to the main components, in some cases additional ingredients are added to the glue. This is determined by the application of the mixture. For example, to create papier-mâché, you can add wood glue (75 ml per 200 g of flour) or gelatin diluted in water according to the instructions on the package. This technique helps to make the staple paper surfaces most durable.

To increase the fixing qualities of the composition, wood glue or PVA is also added to it. In this case, it is necessary to take into account the color of the surface on which the mixture is supposed to be used. PVA is used for light-colored materials. And when working with dark surfaces, wood glue is often used.

When creating textile decorations, a little vanillin and sugar are added to the mixture (0.5 teaspoon per 20 g of flour). This paste makes the fabric more elastic and shiny.

If you are preparing a paste for children's creativity, do not add PVA, wood glue and copper sulfate to it.

Photo gallery: what is added to the paste

Vanillin for shine and aroma PVA glue enhances the binding properties of the paste Copper sulfate for disinfection Food-grade gelatin enhances the adhesive properties of the paste Natural wood glue, or animal glue, is made from animal bones and contains gelatin Sugar is added to the paste used for enrobing the coating

Proportions of water and flour

In the process of preparing the paste, its consistency should be taken into account. For the lungs paper wallpaper requires a liquid composition. If a heavy vinyl material is used for decoration, the paste must be thickened. To do this, add more flour to the mixture.

Table: approximate proportions of ingredients for different paste

The purpose of the glue	Flour (for 1 liter of water)	Additionally
Bonding paper (children's creativity, etc.)	100 g	Without additives
Papier mache	50-100 g	20-40 ml wood (animal) glue (10% solution)
Priming the surface for paper wallpaper		100 ml of wood (animal) glue (10% solution).
Pasting simple paper wallpaper	120-150 g sifted rye flour	1.2-1.5 g of copper sulfate
Pasting embossed paper wallpaper	200-250 g sifted rye flour	2-2.5 g of copper sulfate
Surface primer for linkrust or heavy (vinyl, non-woven) wallpaper	200 g whole wheat flour	200 ml of wood (animal) glue (10% solution)
Bonding linkrust or heavy (vinyl, non-woven) wallpaper	300-400 g wheat wallpaper	200 ml of wood (animal) glue (10% solution); 3-4 g of copper sulfate.

To prepare a 10% solution of animal (carpentry) glue for 1 liter of water, you need to take 140 g of dry matter. The right amount glue is poured into the paste cooled down to 40-50 ° C.

To prepare an ordinary thin paste, 100 g of flour and 1 liter of water are required. If you need a mixture of a very liquid consistency, use 50 g for the same amount of liquid. For the thickest paste, 400 g of flour per 1 liter of water is taken. Of course, these are approximate, not strict proportions: after all, the stickiness and consistency will ultimately depend on what kind of flour you use and on the additional ingredients that you add. Therefore, you can find many different recipes on the net.

The glue is prepared just before use. If you do not use fresh composition within 2-3 hours, it will begin to thicken and lose its adhesive properties. Therefore, do not make "strategic stocks", cook just as much as you need for a one-time use.

Correction of consistency

Over time, the paste thickens. Some experts claim that in this case it is quite possible to dilute the mixture with boiling water to make it more liquid. Start adding 1 tablespoon at a time with constant stirring with a mixer or blender. Follow the procedure until the composition acquires the density you need. However, not everyone considers this procedure of "revitalizing" stale paste to be optimal: the adhesive ability of such a composition is likely to be greatly reduced. But if you just cooked a paste and you see that it is thick, then with the help of boiling water you can really fix the matter.

Do not forget to bring the mixture to a boil after diluting with water.

If the opposite situation arises, and your glue turned out to be too liquid, first cool it down to about 40 degrees: it is at this temperature that the adhesive qualities should be evaluated. If you still need to thicken the paste, then you need to add more flour to it. Dilute the missing amount of flour with water until a batter is formed, pour into the liquid composition, stir thoroughly and then bring to a boil.

Do not try to pour dry flour into the finished glue, most likely, even with constant stirring, you will not avoid the formation of lumps.

Storage

The maximum storage period for the paste is 10 days. The composition must be covered with a lid or plastic bag and placed in the refrigerator. During storage, the paste is covered with a film, which must be removed before continuing work. The presence of mold indicates that the adhesive is not suitable.

Store the paste only if absolutely necessary, because its quality decreases greatly during storage.

Simple step by step recipes

For light wallpapers

The paste used for light paper wallpaper is quite simple to prepare. To do this, you need to prepare:

• 150 g rye or 200 g wheat flour;
• 1 liter of water;
• two containers (shallow 200 ml and a saucepan).

One tablespoon contains approximately 25 grams of flour.

Instructions:

1. Pour flour into a small bowl, gradually pouring 200 ml into it cold water... The mixture must be constantly stirred until it reaches the consistency of liquid sour cream.

   We breed flour in a small container

2. In a separate saucepan, bring the remaining water to a boil.

   Bring the water to a boil

3. Pour into boiling water in a thin stream adhesive mixture stirring constantly.

   We introduce the glue mixture into boiling water

4. Put the resulting composition on fire and keep stirring for another 3-5 minutes until boiling.

   Bring the paste to a boil with constant stirring

5. Remove the paste from the stove and cool.

Important! The order in which the ingredients are mixed must not be disturbed.

Video: the easiest way to weld glue

For heavy wallpaper

For vinyl or non-woven wallpaper, you can cook a thick paste according to the previous instructions, taking 400 g of flour per 1 liter of water. However, in some situations, you may need a durable paste of a special composition, similar to PVA. It is used not only for gluing heavy vinyl wallpaper, but also as a final primer for walls and even for cladding with small-format tiles. It is also cooked on the basis of flour, but using a different technology.

Ingredients:

• 20 ml ethyl alcohol;
• 150 g flour;
• 4 g glycerin (sold at the pharmacy);
• 5 g of gelatin, better than photographic (you can buy it at a store);
• 1 liter of distilled water (available at the pharmacy).

Important! Photographic gelatin can be replaced with ordinary gelatin, but this will impair the adhesive properties and reduce the speed of "setting" of the paste.

Instructions:

1. Pour 200 ml of water over the gelatin and leave for 24 hours.
2. After this time, pour distilled water (850 ml) into a container and place in a water bath. Add the soaked gelatin and stir well.
3. Dissolve the flour in a little water (150 ml) so that there are no lumps.
4. Add flour mixture to gelatin water.
5. Bring the mixture to a boil. Stir it until the mass acquires a homogeneous structure.
6. Add glycerin and ethyl alcohol. Stir the mixture for 10 minutes.
7. Remove the glue from the water bath and refrigerate.

For fabric crafts

A flour paste for textile crafts is made a little differently. To implement this method, you need to prepare:

• 2 tbsp. l. flour;
• 2 glasses of cold water;
• half tsp. Sahara;
• a pinch of vanillin.

Cooking method:

1. Pour flour into a saucepan and pour in ½ cup cold water.
2. Stir the composition thoroughly until smooth.
3. Then pour 1.5 cups of water, sugar into a separate bowl and put on fire.
4. When the liquid boils, add the cold flour mixture.
5. Simmer, stirring occasionally.
6. When the composition thickens, remove it from heat.
7. Add vanillin, stir well and cool.

A paste with sugar and vanilla is used as a varnish when working not only with textiles, but also with other materials.

For papier-mâché

A papier-mâché paste, which involves sticking pieces of paper onto a mold, is done as follows.

Ingredients:

• 1 cup flour;
• 1/2 teaspoon salt
• 3 glasses of water.

Paste preparation process:

1. Sift flour and cover with 1 glass of cold water.
2. Stir well until the mixture is completely homogeneous.
3. Add 0.5 teaspoon salt and stir again.
4. Boil 2 cups of water in a separate saucepan and pour into the glue mixture. Stir again.
5. Pour the composition into a saucepan and put on fire.
6. Boil for 10 minutes and then remove from heat.

For different variations of the papier-mâché technique, you may need a paste of different consistency.

If you intend to soak paper in a paste to the state of a plastic mass, then a liquid paste is used: 50-100 g of flour per 1 liter of water.

Video: how to make a papier-mâché paste

Kleister is a safe and affordable adhesive for bonding various surfaces... But it should be remembered that over time, its quality decreases. In this regard, it is recommended to prepare the amount of glue that is necessary for one use. To improve the properties of the composition, the recipe can be supplemented with certain additives, depending on what you are going to use it for.

There are situations when glue is urgently needed, but it is not at hand. It is enough to know how to make flour paste. It's simple and budget solution.

Learn how to make flour paste, the most sustainable of all types of glue.

The advantages of homemade glue

This glue can be used for insulation wooden windows or for creativity - this is the perfect safe option for making papier-mâché and other crafts. But most often he helps out during the repair when gluing wallpaper.

This tool has a whole arsenal of advantages, which is why many people prefer it to shop glue. Pros of natural flour glue:

• Low cost. It only needs water and flour.
• Use on any surface. And shop glue sometimes only interacts with certain materials.
• Cleanliness and tidiness. Leaves no stains.
• Strength and ease of installation, dismantling. The wallpaper will hold up very well, but if you decide on new renovation, it will not be difficult to remove them from the walls.
• Environmental friendliness. Homemade glue does not contain any toxic substances, it is absolutely safe for humans. That is why it is ideal for making children's crafts.

But not without a fly in the ointment. Flour paste is afraid of moisture. Therefore, it is not suitable for rooms with high humidity such as a bathroom or kitchen.

How to make flour paste for wallpaper

Have you decided to give up industrial glue and prepare the mixture yourself? Then arm yourself with a bucket or basin, a small stirring stick, flour and water.

Both wheat and rye flour are suitable, but for crafts it is better to use a light variety.

Bring the liquid in the bucket to a boil. Then remove from heat and add flour in small portions. Pour it in until the solution looks like a batter.

It is this consistency that will be optimal.