Mobile phone is a diverse comfortable substitute for a USB modem when you are on the way and cannot use mobile operators modem. It is extremely comfortable to connect mobile to the Internet to the laptop or netbook.

You will need

• - Phone with Android, iOS, WM or Symbian
• - SIM card with tariff plan
• - Corporate USB Cable

Instruction

1. At first, make sure that your phone works on one of the operating systems: Android, iOS (Apple iPhone), Symbian or Windows Phone. In addition, the phone should support the 3G / HSDPA connection to the Internet, and not just WAP and GPRS / EDGE.

2. In the main settings of the phone, detect the "Network" and "jumper" item or using the "On / Off key" Turn on the application of the phone as a modem.

3. Later, in the same place, in the settings of the network, activate the mobile Internet, so that your phone managed to exchange data with the universal network. The network of the Internet is obliged to be similar settings proposed by the operator. Use the APN access point, login and password that your mobile operator offers you. Detailed information on the connection parameters is allowed to detect on the official website of your mobile operator.

4. Now, when the unit is ready, using a branded USB cable, connect the phone to the computer. If you use the Android communicator, in the configuration settings to the PC, select the default connection type "Internet modem". If the computer will notify you that the operating system detected a new device and suggest download and / or install the modem driver, agree to the button " OK "either" I accept ".

5. The phone can notify you about the start of the connection with a special notice or the band on the screen, as does the Apple iPhone. Also at the clock in the tray on the computer screen you will see an image in the form of one monitor with a socket (Windows Vista / 7) or 2 flashing monitors (Windows XP). This icon depicts that the Internet connection is installed, you can open the browser and start viewing web pages.

Mobile phones are often used to view Web pages or working with different Internet applications. In addition, these devices can execute the modem functions needed to connect to the internet stationary or mobile computer.

You will need

• PC Suite.

Instruction

1. Select a type of mobile phone connection with a computer. To connect a PC to the Internet, it is permitted to apply both a USB cable and a Bluetooth wireless channel. If you use a cable connection, set the appropriate software.

2. For most mobile phone models, it is allowed to apply the PC Suite application. Select the version of the specified program. Focus on the name of the manufacturer of the mobile device.

3. Install PC Site. Restart the computer. Configure Internet access settings on your mobile phone. In this situation, it is great in order to take care of connecting the unlimited tariff plan in advance.

4. Later checking the probability of accessing the network from the mobile device, run the PC Suite application. Connect the phone to the computer's USB port. Wait until the mobile device is determined by the operating system.

5. Now in the phone menu, select "Modem" or PC Suite. Wait for equipment synchronization. In the PC Suite program window, go to the "Connection to the Internet", by pressing the button of the same name.

6. Fill out the form that appears. Specify the same parameters that you entered when setting up a mobile device. Wait for the message about a successful connection to the server connection. Run the Internet browser. Make sure the computer has received a network access.

7. If you use a Bluetooth adapter to connect a phone with a computer, install the drivers for this device. Run the installed software and enable the phone detection via the Bluetooth channel. Follow the search for available devices and connect to the mobile phone.

8. Click the "Internet Connection" button, wait until the program executes the necessary procedures. Check the probability of opening Web pages.

Video on the topic

The connection of a stationary computer and a laptop in one network can give you a lot of excellence - from the rapid transfer of files and creating a home network, to the game of network games with friends and relatives. In this article you will learn how to contact the computer and laptop to the network.

You will need

• computer, laptop, network cord

Instruction

1. Make sure that the laptop and PC contain installed and working network cards. To connect, use the network cord - a twisted pair with roasted RJ-45 connectors according to the "Cross-Over" scheme, which allows you to combine two computers, or make positive connectors yourself, if you have a cable frishes tool.

2. Connect one connector to the PC network card connector, 2nd to the laptop connector.

3. In the bottom of the desktop panel, you will see the network icon appeared - two monitors. Click this icon and start setting up the local network by clicking the "Properties" button.

4. Go to the TCP \\ IP properties and disconnect the firewall in the security section ("adding"), and then remove the checkbox on the authentication requirement. In the properties of the Internet Protocol, specify IP 10.0.0.10 and subnet mask 255.255.255.0. Apply metamorphosis.

5. For laptop, specify the IP address 10.0.0.20 and the subnet mask 255.255.255.0. Reconvert the metamorphosis, and then go to the Internet protocol settings in the laptop and do the same steps there - set the protocol data, turn off the firewall and authentication.

6. Reboot. Go to Start, select the control panel and run the network setup wizard. In the "Connection Type" section, select Other. Next, select "This computer belongs to a network that does not have an Internet connection." Click Next and make a name for a computer under which it will be displayed on the network. Install the checkbox at the "Enable Universal Access to Files and Printer" item, and again click "Next".

7. Later, how metamorphosis will occur, finish the work of the network setup wizard. Restart the computer, and then repeat all the network settings on the laptop. Later, your computers will be combined into a universal local network.

Video on the topic

Tip 4: How to connect a laptop to the Internet through a computer

Video on the topic

If the memory of your mobile phone has quality to end, then for you all more often №1 is mobile connection phone to computer either laptop . Syma photos taken on the camera of your phone , a lot of audio files received by Bluetooth much reduce the amount of free space of your phone . This task is allowed to solve with copying non-daily files on a laptop. About how it is allowed to do next.

You will need

• Date Cable (USB), free place On the hard disk of the laptop.

Instruction

1. When connecting mobile phone to laptop You need to do the following: - Enable your mobile phone; - Enable a laptop; - Connect a mobile phone to laptop Through the date-cable. Turn the phone and laptop. To pair these devices, use a data cable for your phone .

2. Data cable uses USB data interface. USB (Universal Serial Bus) is a universal sequential tire. It serves to transmit or acquire some information. As usual, such a wire comes with a phone. Also in this set there must be a drive with drivers, but not strictly (depends on the model phone).

3. When connected phone to laptop The operating system issues a request for installing new equipment. Installation can be found not only flash drive your phone But the modem, the one that serves to connect to the Internet network. If there is no drivers with drivers in your kit, go to the developer's website. During the origin of any vogs, it is also allowed to recommend to contact your manufacturer's forum phone Either technical support.

4. When disconnecting the "Phone-Laptop" connection, do not forget to apply the hardening device extraction. To use this feature is allowed by pressing the device icon in the tray, next to the system clock.

Video on the topic

Video on the topic

Mobile telephone He became an inseparable sign of every person. The probability of its use is expanding with the release of any new model - now it is not primitive telephone , and a multifunctional device. With support for it, listen to listening to music, look video, play games, go online and even work. More fully realize likelihood telephone and allowed with support for connecting it to personal computer .

You will need

• Data Cable, Infrared Port, Bluetooth, USB Extension, Drivers Drives.

Instruction

1. By connecting Mobile telephone and a computer, you will have new methods to implement the probabilities of your telephone but. To date, the following types of connectivity received especially widespread. telephone A K. computer . 1st: Wired connection - with a damage of the DATA cable; 2nd - optical, infrared port; And the 3rd connection of the connection is a radio connection, with a profile Bluetooth. Also necessary software, driver package for your model telephone And the program itself for the computer itself.

2. Turn on the computer I. telephone . Connect the computer to the USB port one of the devices that you have in stock. An infrared port is canceled by connecting via USB extension, so that the infrared port itself was on a flat surface, this is due to the thesis of the operation of this device. For infrared port and Bluetooth, it is permissible to install additional drivers, install them from the disk that is complete with the device.

3. Now connect telephone To the DATA cable connector, if you use it, or go to the menu telephone And and enable infrared or Bluetooth. When connecting a DATA cable identification telephone And mechanically happens. To identify telephone and with the support of the infrared port, port telephone And it is necessary to put it on the contrary infrared port connected to computer , at a distance of 5-15 cm. To connect to the Bluetooth Special Technology, it is necessary to activate the function detection of the device on telephone Either a computer when the device will be detected, make sure the connection.

4. As usual, later establishing a connection, for the full work of the computer with telephone ohms need to install on the driver driver for telephone and a program that will facilitate the use of functions telephone And from the computer, it is called PC Suite. This program and drivers are on the disk, the one that went complete with telephone ohms, also allowed it to purchase separately in specialized stores, but best option, it is downloaded from the Internet last version, from the official site of the manufacturer telephone but it spreads out for nothing. Now allowed to download on telephone favorite music or video, install games and applications, and also copy with telephone and on computer photos and video made telephone ohm.

Note!
The most harmless and speed method is a wired (DATA cable). Transmission This infrared port support is the least speed and requires a harsh orientation of devices .Bluetooth the least harmless, because the transmission goes on the radio channel and can be intercepted, however, this is especially the current type of connection, providing a contented speed and the will of the device movement within a radius of 10-20 meters .

Helpful advice
With Bluetooth support, you are allowed to connect not only the phone to the computer, there are many devices that support this data transfer protocol.

GPRS-WAP profile Diesel is comfortable for solving various tasks. With his support is allowed to view the WAP pages in the mobile browser phone . Go to WAP sites. From such sites it is comfortable to download different pictures, games, ringtones, etc. The rod nodeshneum is a satisfied expensive cost of traffic, and this will agree, a significant argument. If you have a current phone that supports MP3 formats, Wave, MMF + Voice is more excellent to connect the GPRS-Internet profile.

Instruction

1. If you wish, you can invariably order installation settings from the operator mobile communications. For this, everyone dial the support service number and order settings for the profile you need. As follows, a certain time comes to the phone that the profile settings are obtained. Sing them, and easily and without trouble you get a customized GPRS-Internet profile on the phone.

2. But there are such environments when the Internet It took an unforeseen, and the support service number you do not remember. And even if you suddenly recall, it often happens that all operators are busy, you have to expect. It is consumed not only time, but also the charge phone . What to do then? Have to independently install everything need settings GPRS, for example, take the Sony Ericsson phone with the Beeline communication operator. It turns out, let's start by step-by-step instructions for setting up an account:

3. Digging the "Access Point" - Record Internet.Beeline.Ru. In the username, specify Beeline.

4. In the "Password" section, write BeelineSubet "Password Request", check the "Disabled" checkbox.

5. In the "Allow Call" section - choose the result "At your discretion"

6. Now go to the "IP address" section, "DNS address" - do not prescribe anything here, it is appointed mechanically.

7. Authentication - special value does not have, but if there is no connection phone to the Internet U, then check the settings here. If you have a positive effect, step by step by performing all the stages, then the GPRS-Internet profile will be connected on your mobile phone. Account set up, go out the Internet And download all the information that worries you.

Video on the topic

In modern SIM cards, closely contain all the necessary mobile settings. internet which are suitable for most phones. By inserting a SIM card in the iPhone, you will be amazed by the fact that this high-tech device does not accept mechanical settings and requires their manual input.

Instruction

1. In order to set the settings internet In your iPhone, open the "Settings" - "Main" - "Network" - "cellular data network", and in the menu that opens, enter the data of your cellular operator.

2. If you use Beeline's cellular services, then enter Internet.Beeline.ru in the APN field, and enter Beeline in the Login and Pass fields.

3. If you use MTS cellular services, then enter Internet.mts.ru in the APN field, and leave the Login and Pass fields empty.

4. If you use the MegaFon cellular services, then enter the Internet in the APN field, and enter GDATA in the Login and Pass fields. As alternative option It is permissible to try to leave the Login and Pass empty fields.

5. If you are using the tariffs of the "Light" series from MegaFon, then enter LTMSK in the APN field, and enter GDATA in the Login and Pass fields.

6. If you use MTS Kuban cellular services, then enter Internet.kuban in the APN field, and leave the Login and Pass fields empty.

7. If you use Beeline Kazakhstan's cellular services, then enter Internet.Beeline.kz in the APN field, and enter Beeline in the Login and Pass fields.

8. If you use the LIFE cellular services, enter the Internet in the APN field, and leave the Login and Pass field empty.

9. If you use Kyivstar cellular services, then enter kyivstar.net in the APN field, enter IGPRS in the Login field, and enter the Internet in the PASS field.

10. If you use the UMC cellular services, then enter the APN field http://www.umc.ua, and leave the Login and Pass fields empty.

11. If you use the Mobile School Services Mobile Services, then enter Internet.smarts.ru in the APN field, and enter Smarts in the Login and Pass fields.

12. If you are using the smarts Penza GSM cellular services, then enter Internet.smarts.ru in the APN field, and enter WAP in the Login and Pass fields.

13. If you use TELE2 Latvia cellular services, then enter Internet.tele2.lv in the APN field, and leave the Login and Pass fields empty.

14. If you use the LMT Latvia cellular services, then enter Internet.lmt.lv in the APN field, and leave the Login and Pass fields empty.

Video on the topic

Note!
Saving settings, do not forget to restart your iPhone!

Connection steps internet Depend on what type of connection you provides your provider, and on computer settings. Home networks that combine hundreds of thousands of users for broadband access to the Internet - the connection method, the one that is especially famous in Russia. Connection procedure for this method is simple and will not take much time.

You will need

• Computer running operating system Windows Vista.

Instruction

1. Go to the "Control Panel" and start the "Network and Internet" applet, or from the Start menu, select Network on the category panel. A window will open with the name "Network Management Center and Universal Access".

2. On the left side of this window, select the "Install connection or network" link. The "Connection Wizard" window opens. This feature in Windows Vista controls all connections by which the computer can be connected to the Internet.

3. In the wizard window, you should prefer the connection option, the one that is available in your conditions. When connected internet Through a wireless network in the office or at home, click the left mouse button on "Configuring a wireless router and access points". Connect to the workplace is made to configure the access to the VPN network. This species Connections offers multiple providers that provide Internet by cable connection.

4. In the following window, you set the switch to the location "No, create a new one." To the question "How to fulfill a connection?" Choose "Apply My Connection (VPN)". On the proposal of the system to configure the connection before continuing you choose "postpone setting ...".

5. In the following 2 windows, you will need to be observed to introduce information that was provided by your provider in the contract concluded. In the first window, you enter the address of the provider and click "Next", and in the second - user login and password. Below, put the "Remember this password" checkbox, in order not to introduce it to any connection. In conclusion, click the "Make" button, and then "close".

6. Now it remains to open the "Network Connections" window by clicking the "Network Connections" link. On again, the connections made, call the context menu by the right mouse button and select "Connect".

Video on the topic

Tip 11: How to connect the Internet to a computer through a cable

If your homes have several computers or laptops, then smarter than everyone to combine all these devices to the local network. Of course, in this case, a desire to provide computers access to internet .

You will need

• network card, network hub (when connected 3 and more PC).

Instruction

1. Let's see the situation when you have three computers. It is permissible, of course, to conclude three contracts with the provider to provide Internet access services. Everything is rapidly and easy, but there is a large minus - you wanted to pay for three accounts, not everyone wants.

2. Let us see examples of creating a local network with access to internet own forces. In this environment, we will need either a router or a network hub. The 2nd version is cheaper, but it is relatively inconvenient. The fact is that when connecting computers to the network hub, they will receive synchronous Internet access only under one condition: one of them must execute the functions of the server.

3. Let's focus on this option. Select a computer, the one that will distribute the connection channel to the Internet. Install the supplement network adapter in it. Combine this device with a network hub. Note: If only two computers will be included in the local network, the network hub will not be required at all.

4. Connect cable Internet to the computer-server. Configure a connection to the provider server. Open the properties of this connection and go to "Access". Activate the item "Allow other users of the network to apply connecting to internet this computer" The second network card mechanically get a static (continuous) IP address 192.168.0.1.

5. Combine the 2nd computer with the first, applying for this network cable . Open the settings of the network adapter parameters on the second PC. Go to TCP / IP Protocol properties. Activate the "Apply Further IP address" item, and specify its value equal to 192.168.0.2. In the third and fourth fields of this menu, enter the IP address of the computer server.

6. Pay attention to the further nuance: If you need to connect several PCs to the server, then use a network hub.

Modern mobiles phones Offer wide spectrum Probables for interesting leisure activities. You can share the desired content with friends for this and download it from the network. But a particularly comfortable and cheap method fill your phone content is synchronization with a computer.

Instruction

1. As usual, everything you need to connect the phone to a computer, namely, the date cable and drive disk you can detect in the configuration of the cellot. In case this is not the case, you invariably can purchase a data cable in a cellular store or order via the Internet. If your phone is not closely manufactured and, as a result, it is difficult to detect the data cable and drivers for it, use the data cable from the other phone model. The main thing is that the connector on the wire approached your connector on the phone. Drivers you can download from the network.

2. Download drivers and software from the network. To do this, read technical documentation And detect the formal site of the manufacturer of your phone. Use the site map or search by the site in order to detect a section from which you can download drivers and software for synchronization. In case your model is missing, download the necessary software from sites dedicated to the manufacturer of your unit, such as samsung-fun.ru and allnokia.com. On the same sites you will be able to detect a huge number of content, the one you can upload to your phone.

3. Install downloaded programs and drivers on your computer. In order to ensure that the computer recognized the new device, which is your phone, you need to first install the software, and then closer to connect the cell. In case the program and drivers are represented by one file, run and install it. In the case, if the program is represented by one file, and the driver is different, install the software, later, connect the phone to the computer. When prompted to add a new device, you will be prompted to insert the drivers CD or specify the path to them. Specify the path to the drivers, later, click "OK". Make sure the phone "sees" the phone is in the displeasment case, reinstall the drivers.

Laptop - a comfortable assistant and partner modern man. It is less portable than the phone or tablet, but it allows you to use the same operating systems as on desktop computers. The design and location of the components of the laptop were allowed to place them in an extremely limited volume.

Instruction

1. Laptop heart - motherboard. It is firmly different from the same components used in the desktop, but it is located the same components: a processor, chipset, RAM, ROM with BIOS, real-time clock with a battery and others. In most cases, the processor is located in the panel, as well as on the ordinary computer motherboard . But the fan on it is a special design. He blows the radiator, located not at easy on the processor, and on the hermetic hollow copper tubefilled with refrigerant. Another end of this tube is attached to a polished plate, pressed through the thermal chaser or a thermal block to the processor. Branch from the tube lead to similar plates of other sizes, pressed to the chipset and video card. Such a cooling system is a dipstone, which is required in the laptop.

2. The video card is also strange. It is located not perpendicular to the motherboard, but parallel to her. Instether slots for its connection, connectors are used. And the connector for connecting an external monitor is not on the video card, but on the motherboard. RAM modules, for access to which the lid is provided, differ from those used in desktop computers by approximately twice as long as long. They wear SO-DIMM. Occasionally, one of these modules is placed under the keyboard, which in this case it is easy to remove. In a netbook, part of the memory can be in the motherboard.

3. Rough disk and DVD drive are located on removable sled. Through adapters, they are connected to the connectors on the motherboard. The design of these nodes is chosen such that they consume relatively small current and are easily placed in the laptop housing. The voltage of their nutrition is small. If both nodes are powered in desktop computers (5 and 12 V), then in a laptop - only one (5 V). In netbooks are used and solid-state drives, occasionally non-removable. And if a rough Disk of Old Type failed in a laptop, the car is allowed to download from the flash drive.

4. Accumulator battery Connected to the motherboard through a connector with a substantial cross section. The charge controller mechanically launches and stops charging, switches the laptop from external to internal power and back. If in the desktop computer built-in power supply produces required voltages Easily out of the network, then in a laptop, this reform occurs in two stages. External block Nutrition produces one voltage, depending on the type of computer, from 12 (in netbooks) to 19 V. The rest of the same stresses are produced from the power supply voltage or battery with transducers located on the motherboard. Fans no power nodes have.

5. The keyboard and touchpad are connected to the motherboard with loops. There is no controller in the keyboard, it is located on the motherboard. In touchpad, he is, as in an ordinary mouse. The screen is attached via a slide connector from thin wires placed in a metallized fabric, combined with the universal laptop wire. Built-in speakers, as well as a bar with control buttons and LEDs are connected by ordinary wires, or also loops. For auxiliary tiny slots, Bluetooth modules, WiFi, and occasionally - and GPS (GLONASS) are placed. Even more tiny coaxial connectors are connected by antennas. On the motherboard's sides, the connectors were displayed to connect external devices, the volume control, Bluetooth and WiFi switches.

6. Laptop nodes are extremely fragile due to miniaturization. To look at them once, in order to realize, why the imminent computer requires careful circulation. But if any of these nodes fail, no need to be upset. Change them truth and more difficult than in the desktop, but also permissible.

Video on the topic

Tip 14: What to do if the Internet does not work through the modem

Wireless Internet, working through a modem, differs from the wired assembly to the unstable speed, and the quality of communication directly depends on the workload of the provider's network and even from weather conditions.

What is a modem

Before preferring the modem to enter the Internet network, it is important to realize what this device is and how it works. The modem is a device that provides communication with the Contractor for Internet Access (Provider), transforming analog signal In the digital, the one that takes the computer. Especially stable connection ensure similar devices connected to cable telephone. The work of the tiny modem of mobile communications providers does not differ in great quality, but their celebrity is still higher than wired counterparts, because they can be used anywhere.

Major Trials of Modem

Incorrect connection of the device is a reason that is rare, but still takes place. When installing a program to a computer, the user can be made incorrect actions, and the modem will not easily connect easily. If there was no more closely output to the Internet with the support of the modem and suddenly it began to disconnect or disappeared the speed of reception and transmission, then the reason may be zero or close to zero equilibrium on the SIM card device. It is easier to cope with such a problem easier than everyone - it is necessary to pay for the bill. When the device is connected positively, there is money on his account, but it does not work, then the culprits can become the metamorphosis of the network signal or its insension, weather data or a computer snag. In similar cases, you need an expert's subsoil, exclusively to those users who do not have satisfied skills to correct serious problems.

How to determine the cause of the lack of communication

Calling a wizard at home - pleasure expensive, the following users of modems choose to correct the situation and solve the problem independently. Experts recommend such an order of action. Earlier, each must check the connection of the modem with the computer. If the program is displayed, but does not connect to the network, then check the signal tier, the one that shows the antenna icon in the modem program window. Further step - checking equilibrium on the device SIM card. In the event that the above parameters are all in order, it is necessary to contact the Internet provider's technical expert. Its phone number must be specified on the accompanying documents or in the instruction on the application of the modem. The loud, as usual, gratuitous, therefore there is no need to hurry, it is permissible to calmly explain, with which the user faced with the user when entering the Internet. The technical expert will help change the settings, if necessary, either make an application to the engineer for repair work At the base station.

Video on the topic

Note!
Remember that mobile operators establish a large price of the cost of 1 megabytes of adopted and transmitted data, and unlimited tariffs are often limited to speed and traffic.

Often, users of smartphones have problems correctly configure the Internet on the phone. If you are an advanced user, then you can connect manually by filling out the appropriate data shape in the operating system. For all other users, automatic configuration is available by SMS messages from the operator.

How to connect mobile internet

On the phone, connect mobile data can be manually. Step-by-step instructionWith which the Internet is configured on Android:

1. Open the settings menu on the phone.
2. Select "Connect", "Mobile Networks", "Other Networks", "More" depending on the device model.
3. After select "Access Points".
4. Click the Add button if it is not displayed separately, then find it in the context menu.
5. A new profile will appear, which must be fill in accordance with the settings of a particular operator.
6. Save the data, go back to one level up and select the profile you just created.
7. Turn on "Mobile data" and restart the phone.

The table shows the settings of three popular providers, entering which will allow you to connect the Internet to cell phone. If you have met additional items when filling out the profile, you need to skip and leave the default values:

Automatic setting

If for any reason you did not manage to connect the mobile Internet manually, you can always use automatic tuning. To do this, you need to perform the following actions:

1. "Ask" your cellular operator to send a special message with the settings (such an SMS is often marked with the envelope icon with a gear).
2. Open the received SMS message.
3. Select the "Appendix: Internet".
4. Click the Install button.
5. If you need a PIN code, then enter "0000" or "1234".
6. In case the code did not come up, contact the cellular operator to find out the right pin.
7. Confirm the selection by pressing the "Yes" button and turn on the mobile data in the phone curtain, restart the device to activate the changes.
8. On some phone models, the actions described above are not required, you just need to order a message from the operator to connect the Internet.

Connection via Wi-Fi

You can access the Internet on the phone not through mobile data, but via Wi-Fi. To connect the worldwide network in this way on the Android operating system, use the following instructions.

1. Unlock the device, go to the main menu.
2. In the list of icons or in the operating system curtain, find "Settings" (often this item is denoted by the gear symbol), transition.
3. You will appear a list of custom items, find the "Wi-Fi" string and go to the submenu.
4. In the older versions of the operating network, the Android must first go to the "Wireless Networks", and after selecting the "Wi-Fi Setup" item.
5. If the Wi-Fi router is turned on, then all available connections will be displayed.
6. If the adapter is turned off, the system will propose to turn on the Wi-Fi module for viewing available networks.
7. Select the desired network from the list.
8. In the dialog box that appears, enter the access password.
9. If you accidentally entered the wrong data, then click on the network name, select "Forget" and re-enter the authentication settings to connect the Internet.

How to be if you need an Internet, where, there is no Wi-Fi access point or allocated internet line? Especially relevant for those who travel a lot or are often on business trips.

There are several options here:
1. Buy 3G modem from any mobile operator.
2. Use mobile Internet through a mobile phone.
3. Use mobile 3G Internet via a smartphone with Wi-Fi module (90% of smartphones starting from 2012).

First option You can use if you do not have a mobile phone that supports GPRS or EDGE connections. These are usually phones until 2005 release. But this option is not cheap! It is necessary to buy a 3G modem and pay monthly monthly for the Internet.

Second option Interesting. It is important that your phone supports the GPRS or EDGE connection. Additionally, you do not pay anything in this case, because Mobile operators are usually included in any tariff package some number of free internet megabytes. In the extreme case, you can choose a tariff package where you definitely have free or inexpensive internet megabytes.

How to enable the Internet on your computer using a mobile phone will tell you on the example of the Samsung C3322 DUOS phone. This phone has everything you need to use the Internet directly from the phone or connect the Internet on your computer. And it does not matter stationary is a computer or laptop.

My goal was to connect the laptop to the Internet via a mobile phone using a computer-phone connection via Bluetooth (Bloom) so as not to mess with wires.

Now, by steps, how I connected the computer to the Internet through a mobile phone using a Bluetooth connection.

1. Check the Internet connection settings in the phone. To do this, you can send MMS. If sent - everything is in order, there is a connection. If not sent, you need to call the operator and receive configuration from it via SMS and set these settings.

2. Turn on the Bluetooth on the phone. In my case, the path on the phone is: Menu - Applications - Bluetooth - Options - Settings - Enable / Disable Bluetooth

3. Turn on the Bluetooth on the computer. I have on laptop Bluetooth It turns on using the FN + F3 key combination (the antenna icon or specifically the Bluetooth icon can be drawn on the Bluetooth on button. If you have an embedded Bluetooth adapter on your computer, you can buy it separately and connect via USB.

4. When Bluetooth turns on the computer, the Bluetooth icon will appear on the computer (right, bottom corner of the desktop). At the same time, additional drivers for Bluetooth modem will be installed.

5. Click on this icon right-click and select "Add Device". Next, follow the instructions for adding the device. In the process of searching, the phone may ask permission to connect to a computer, pay attention to it and click on "Allow" or simply "yes" in the phone.

If the wizard did not find your phone, then check if Bluetooth is on, put the phone closer to the computer (up to 10 meters), check in the Start menu - devices and printers (for Windows 7) can your phone already found earlier.

6. Go to the Start - Devices and Printers menu (for Windows 7), if the wizard after the search automatically does not automatically translate you into this panel.

7. Click on the right mouse button on the picture found.

8. Select the "Switched Connection" - "Create a Switched Connection ..." (for Windows 7).

9. Select from the list any modem, usually the first in the list.

10. Enter the phone number, usually * 99 #, more precisely, you can learn from your operator or look on the Internet using the search. The "username" and "password" are usually not filled, it can also be clarified by your operator. Next, call the connection as it is convenient for you is just a name.

11. Press the "Connect" button. The wizard will create a connection. Please note that the phone can ask the connection permissions - click "Allow" or simply "Yes" on the phone. If the wizard issues an error message, it is possible to connect to the selected modem, just need to select another modem in the list - repeat item 7-10.

12. Everything. You can enter the Internet that will offer you a connection wizard. With the following connections, select the desired connection (via the phone) through the Network Connections icon near the clock, the right bottom corner of the desktop.

ATTENTION!!! If for some reason, you will need to delete an excess connection, go to the start, select "Run", write nCPA.cpl This is a panel Network connections That for some reason in Windows 7 is hidden, and here you can already delete or rename connections. Use the right mouse button on the selected connection.

Thus, using your mobile phone, you can easily connect a computer to the Internet where there is no way to connect through a dedicated line or Wi-Fi connection.

Third option- It's a router or access point from your smartphone. On the smartphone, there must be or 3G the Internet, or the usual mobile Internet.

So, open the top panel of the smartphone or tablet and turn on "access to Wi-Fi / Wi-Fi Direct" (you need to hold a little finger to the settings).

Save the settings and open the Wi-Fi connections on the computer (antenna in the lower right corner). In the list, select your network and connect, entering the password, which was in the settings or the one that you yourself came up with.

Everything, now the Internet is working on a computer!

All modern mobile devices are equipped with various modules that allow them to use them to access the Internet. However, you can not just surf on the network on the phone, but also make a mobile Internet source for other devices.

Using a smartphone

If you have a smartphone running on the basis of Android, the question is how to connect the Internet via the phone will have two solutions at once. Both methods described below are equally effective and are suitable not only for smartphones, but also for tablets with SIM-card support.

If the computer (laptop) is equipped with a Wi-Fi module, you can make an access point from the smartphone that will distribute the wireless network.

After the message appears that the access point is active, click on it to open the settings. Select "Setting the Access Point" section.

Specify the network name, protection method and password. This data is set by default, but you can change them manually. Be sure to save the changes made.

Connecting to an access point created on the smartphone is made by standard scheme. Run on the computer search for available networks, find your Wi-Fi point and connect.

If the Wi-Fi module has no computer, you can try to use your smartphone as a USB modem:

When successfully connected in the system tray, a notification appears that the connection is established.

If you are trying to configure the Internet on a computer on which you stand Windows XP or an earlier version of the OS from Microsoft, then most likely, the modem driver will not be automatically installed. You will have to download it from the site of the manufacturer of the smartphone, to install forcibly installed, and only then try to exit the Internet.

Using a mobile phone

If you have a smartphone that supports the "Access Point" function, then it will be easy to enter the network. Another thing, if you want to connect the Internet through a regular mobile phone. Before the appearance of high-speed dedicated lines and wireless networks, such technology was used quite often, but recently forgot about it a little. Correct this oversight and revive useful information in memory.

The initialization string is individual for each individual tariff plan for a particular cellular operator. You can clarify these data necessary for the correct connection, on the operator's website or in the technical support service.

Creating a connection

After setting up a mobile phone, you can switch to the creation of a new connection. If you know how to configure the Internet on Windows 7 / 8/8.1, you can easily cope with this task:

Similarly, you can configure the MegaFon modem if for some reason the standard program for connecting to the Internet refuses to work correctly.

If you are using Windows XP, the names of the items and the procedure for creating a connection may differ slightly. However, the procedure itself remains unchanged, so it is important to understand its meaning.

For convenience, you can place the desktop connection shortcut. To do this, find the created connection, click on it right-click and select the "Create Label" item. A window appears with a proposal to place a shortcut on the desktop - click "Yes" to perform this operation.

Internet access

The equipment is configured, the connection is created - you can now go online using a mobile phone:

Wait until the connection process is completed. If everything goes successfully, a notification appears in the system tray that the connection is established. Open any browser and check if web pages are loaded.

Hello, friends! I recently wrote an article in which I told about. But as it turned out, the way I wrote in that article is not suitable for connecting mobile devices, such as phones, smartphones, tablets, etc.

And if you consider the fact that a lot of people want to set up a laptop on distribution Wi-Fi And connect to it is the mobile device, I decided to correct the situation. This article can be considered a continuation of the previous article.

In order to force the laptop to turn into a router and connect a mobile device to it, we will use the Virtualrouter Plus program. This is a small, simple program, which is very easy to configure than we now and do.

If you do not understand what we will do now and did not read the article, the link to which is above, then I will quickly explain.

Suppose you have a laptop and some other mobile devices that have Wi-Fi. And the Internet is connected to you, let's say on the cable and only to the laptop. Wi-Fi router no. And you want to connect your phone, or tablet to the Internet. So, we will force a laptop to take the Internet by cable (or in another way, for example, via a USB modem. Not only by Wi-Fi) And distribute it to Wi-Fi. The laptop will be a point of access.

There are several ways to set up distribution. You can with the help of special programs, such as Virtualrouter Plus, Connectify Hotspot, or through the command line. I really liked the free Virtualrouter Plus program, so I'll show you how to configure it. With it, everything turned out the first time.

What do we need?

We need a laptop (netbook, stationary computer with adapter) where there is Wi-Fi. The Internet, which is connected using a power cable, or USB modem. Virtualrouter Plus program (further give a link) Well, the device that we will connect to the Internet (phone, tablet, etc.).

Everything is? Then start :).

Configure Wi-Fi distribution from a laptop

Let me remind you once again that the laptop must be connected to the Internet using a cable, and not through a wireless network. That's so approximately:

And the connection status should be like this:

If everything is connected, we can continue.

Setup Virtualrouter Plus

First download Virtualrouter Plus you can download version 2.1.0 (on which I set up) By reference, or. Links are verified.

Download the archive and remove it into the folder. Run the file in the folder Virtualrouterplus.exe..

A window will open in which we need to fill out only three fields.

Network Name (SSID) - In this field, write a name for your wireless network.

Password. - Password. Password to be used to connect to your network. Set the minimum of 8 characters in English.

Well, on the contrary Shared Connection. Select the connection from which the Internet will be distributed. I have the Internet connected via the cable, so I left the "LAN connection".

All, click START VIRTUAL ROUTER PLUS.

All windows will become inactive, and the Stop Virtual Router Plus button will appear. (With it, you can turn off the virtual Wi-Fi). You can minimize the programs and it hides on the notification panel (from the bottom right).

Connect the device to Wi-Fi

We now take the phone, tablet, or what you want to connect there (I have, such as the HTC phone on Android), We turn on it Wi-Fi and looking for an affordable network with the name we asked in the Virtual Router Plus program.

I have this network:

Click on this network, enter the password (which we specified when setting up the program) and click Connect. It should turn out something:

You can already try to go to sites from the phone. (or other device)which receives the Internet by Wi-Fi from the laptop. But the connection is that, and the Internet may not work. It's true:). Just need to configure something else.

The device to Wi-Fi is connected, but the Internet does not work

Return to the laptop, open the program in which we set up distribution and click STOP VIRTUAL ROUTER PLUS. Then right-click the connection status and select Network and Shared Access Control Center.

Select on the left Change adapter settings. Right-click on the adapter LAN connection and select Properties. Click the tab Access.

Install the checkboxes as I have in the screenshot below. In field Connecting home network You need to select an adapter. I do everything perfectly when installed Wireless Network 3 (You can have a wireless network connection 2, or another). Experiment.

Then in the Virtual Router Plus program, we start our network again. The phone must already establish the connection automatically. The Internet should already work. I worked everything, sites opened!

The transformation of the laptop in the router was successful :).

Tip! You can add the Virtual Router Plus program to autoloading, whatever it is permanently manually. About how to do it, I wrote in the article.

Afterword

Of course, if there is an opportunity, I would advise you to buy a router. Even some simple, inexpensive modelFor example, it will be perfectly cope with the distribution of Wi-Fi into several devices. And you don't have to torment the laptop :). In addition, the laptop itself will be able to connect along a wireless network, and not to distribute it.

But this method is also good. You can quickly organize a wireless network, even without a router.

If you have a problem, then leave questions in the comments, and even better on our forum. We'll figure out. Good luck!

More online:

How to configure a laptop to distribute Wi-Fi and connect a mobile device to it? Setting up Virtualrouter Plus. Updated: February 7, 2018 by the author: admin.