Varieties for chain chainsaws. Nozzard and adaptations for chainsaws Benefits of replaceable nozzles

How to choose the desired chain Stihl. .

The saw chains have several basic parameters. You can choose a chain that is guaranteed to suit your saw.

Step chain. It is usually measured in inches. It happens 3/8 ", 0.325", 0.404 ", ¼". If you need a chain with a step 3/8 "it is necessary to take into account that two completely different chains are made with this step - low-profile and full-lifted.

The thickness of the main chain link. Must match the width of the tire groove with which this chain will work. It happens 1.1mm, 1.3mm, 1.5mm, 1.6mm.

Number of chain links. Determines the length of the chain and, accordingly, the length of the tire.

If you correctly picked up the parameters - the chain will definitely suit your bus.

But the chains differ also by type. Some cut faster, others safer, third more comfortable, fourth are adapted for special conditions cutting, etc. The differences are in the form of a cutting tooth, connective links, intermediate links and materials used for the manufacture of these parts, the thickness of the cutting part of the chain, etc.

The site contains almost all types of chains that Stihl offers. Chains are combined into groups in which the chain are identical by parameters different lengths. As you can see, these types are more than 20. Short description There is to everyone. And moreover, Stihl releases a chain so wide gamut that you can always choose the desired not only to stihl saws, but also to any other saws. And as a rule of several types.

If such a variety causes you zevoth - call or come to us. We will tell and select the desired chain of Stihl. And tell me how to serve the saw chains, how to use them as efficiently as possible. Yes, and make it help.

Now the chainsaw is almost everyone, but many use it only in direct appointment. Firework harvesting, cropping, all these works are carried out, as a rule, no more than once a year, all the rest of the chainsaw dust on the garage shelf, and this is not correct. Chainsaw can be used as a power unit for of various devices, This will be discussed in this article.

There are special nozzles for chainsaws on sale, with which the tool functionality increases significantly.

Using additional equipment from chainsaws, it is possible to make a woodcutter, it will help to cope with chocks that, with the help of an ax, split problematic or boat engine, for walking on the rubber boat.

In fact, nozzles are needed in order to extract the maximum benefit from chainsaws so that it does not dust on the shelf, but was used daily to solve a wide variety of tasks.

To install nozzles does not require special education or skills, everything is simple and easy.

What are the nozzles for chainsaws

Today, designed by manufacturers and are available on sale. big choice Nazuada for chainsaws. More specifically, for your saw you can buy:

The prefix boat engine.
Winch.
Pompe.
Motobur.
Drovokol.
Device for cutting boards.

If you like to make something with your own hands, then I will become an excellent helper, because it can be used as a power unit for its inventions. For example, in the video below, it is shown both from simple chainsaws you can make karting for your child. It is very interesting and not so difficult as it seems.

And in the next video showing a homemade snow blower, the engine of which is chainsaw. The idea is very good, but a snow blower has not been modified a little, but still it is able to facilitate the cleaning of the territory of a private house.

Now consider each of the nozzles in more detail, we will deal with the pros and cons of use, we conclude how the use of the adaptation affects the resource chainsaws and its efficiency.

Boat motor

The nozzle is intended for installation for small rubber boats having a tramer. Characteristics:

The gear ratio of the gearbox 1: 2.
Maximum speed in standing water 20 km / h.
Screw three-point diameter of 150 mm.
Fuel consumption 1 liter per hour.
Weight in the assembled state of 8 kg.

Such characteristics make it possible to use the nozzle to those who do not need a high speed of movement on water, and it is enough to just get from the point "A" to the point "B". It is popular with fishermen, since light and compact, enters the trunk of a passenger car.

Included with the nozzle supplied all the necessary fasteners. There is an instruction for installing nozzles and its correct use.

The main advantage of using such a prefix for chainsaws is savings on buying a boating engine.

How to install chainsaw on the nozzle boat motor you can find out by looking at the video.

Winch

Another useful nozzle for chainsaws is a winch. With it, it is possible to lift loads weighing up to one and a half tons. The usual electric winch, to work requires electric currentthat significantly reduces its capabilities. Chainsaw with a winch can be used anywhere.

Having such a nozzle on the harvesting of firewood, you can ship trunks of trees, plugged by several chocks. Also, if necessary, such a nozzle will allow you to pull out the stuck passenger car, for cargo cars it will not fit.

The cost of wincing chainsaws is a bit more expensive than electric, but its mobility and ease of use compensate for the difference.

There are several models of winches for chainsaws, which may differ a cable length, size and weight. On average, the length of the cable is about 30 meters, the weight is not more than 12 kg.

It is interesting: using a plow chainsaw together with a winch for chainsaws, you can handle the land, spending the minimum of effort.

How to steal the Earth with the help of chainsaws and winches, is shown on the video. Benefits this method in that in this way you can process the Earth on country areaswhere there is no possibility of connecting electricity.

water pump

Pulling out the water from the flooded cellar, pump the water tank for watering from the well or simply pump water from one place to another will help a special nozzle, which is called pump for chainsaws.

The device is quite simple and does not require special skills to install on a saw. Its advantage in mobility and connectivity. Additionally, the nozzle will need to purchase hoses. Pumps, like other stalls on the saw are manufactured by several manufacturers, therefore, there may be different performance and other characteristics.

This nozzle is universal and can be installed on chainsaws of various models and stamps. Those who are not used to paying for additional equipment to a chainsaw, you can make a pump with your own hands.

Motobur

Another useful for everyday nozzle is Motobur (ice-free). There are a lot of options for this console, there are self-made. It can be useful not only to lovers winter fishing, T. K. Using it, you can drill the pits to install the fence columns.

The advantage compared to electrical options in mobility, because the boring can be used regardless of the availability of electricity.

Important! To install a boraxy, you will need to remove the standard clutch and the leading asterisk with chainsaws, for which it is necessary to fill the crankshaft. Information on how to properly remove the clutch with chainsaws you can find on our website.

Included with a drum for saws, a transition clutch is supplied, which is installed instead of the lead sprocket.

Drovokol.

Thick chocks are seriously splitted with the help of an ax, to facilitate the process on chainsaw you can install a firing nozzle. It is screwed into a chock and due to a cone-shaped form splits it.

Nozzle universal and can work on various models chainsaw. User feedback on this adaptation is positive, since it really makes it easier to split large chocks.

The cost of nozzle firing is acceptable, at the moment does not exceed 1000 rubles. You can buy on specialized sites or in gas station stores. Installing this bile does not require certain skills, the manual manufacturers are attached.

Jointer

If you need to shoot not a large number of Board, but you do not have a specialized machine, the nozzle-Fuganok will help you do it.

The prefix is \u200b\u200bmolded onto standard bolts for fastening the tire, instead of clutch, a lead pulley is installed, which is put on the belt. Through the belt, an effort is transmitted from the drive pulley to the slave, which makes the planer shaft with two knives rotate.

The system is very simple and reliable, the quality of processing depends on the maximum number of revolutions of the chainsaw to which it is installed.

In order to compensate for the lack of load on the engine at the time of using the faganok nozzle, you can slightly reduce the maximum number of revolutions. Instructions for adjusting the carburetor chainsaws you can find on our website.

Nozzle is not universal, for her work it is required to replace the lead sprocket on the pulley, the attachments of all chainsaws are different. Therefore, when you buy, you need to consult and choose the model of the nozzle suitable to your chainsaw.

Coroed

Another prefix for chainsaws, which is designed to clean the trunks of trees from the crust.

She is very similar to Fuganok, attached similarly and has two pulleys and belt. The main difference is that there is no stubborn strap on the cored, which does not allow the knives, as a result of which they remove only a certain amount of chips.

Bulgarian

One of the most popular nozzles that users leave only positive reviewsThis is a Bulgarian, or it is also called the ears, but it is not her, because it is designed only for cutting.

Fastened to the regular tire place. Not universal, selected under the model of chainsaws for which it is intended. Not expensive and easy to use. Consists of the following elements:

leading pulley;
frames;
slave pulley with shaft and fastening for disk;
a belt transmitting force;
protection.

Simplicity of design and standard Bulgaror consumables (discs), made this nozzle very popular. Its advantage is mobility, the possibility of applying in places where there is no electricity.

In the place of the cutting disk for metal, which is shown in the photo, you can install carbide for cutting concrete and use a saw with a nozzle as a strokesis.

Council. When working with a Bulgarian nozzle, the engine is experiencing a significant load, so it is not recommended for chainsaw with a capacity of less than 2 kW.

In the next video, it is shown how to collect, install, configure and operate the nozzle. The video shows that a chainsaw with a capacity of 1.5 kW does not cope with the load, revolutions drawdowns are noticeable. In order for you not to be repeated, use more powerful saws.

Nozzles for chainsaws Country and Huskvarna

A special nozzle that would only come to a chainsaw of the calm and possessed any unique functionality that is not available to others. All that can be installed on the saw saws has analogues and for other chainsaws, the same with Huskvarnian chainsaws. For this reason, when choosing chainsaws, you should not pay attention to the advice of sellers about purchasing a specific model, due to the possibility of installing additional equipment on it, the extensive functionality.

The only thing to pay attention to when choosing is power, since to work with nozzles it is recommended to have more powerful chainsaw.

What devices can be made with your own hands

Many "garage" crafts do not spend funds to buy nozzard for chainsaws, but they make them independently. In fact, they have nothing complicated and almost everything can be made with your own hands. All that is needed for this is a welding machine, emery and the necessary knowledge and experience, spare parts from old instruments and mechanisms can also be useful, for example: chains, belts, pulleys, shafts, etc.

On the Internet pages you can find information on how to make a baller, pump, winch or boring nozzle. In order to dispel doubts, we suggest watching the video on which the homemade nozzle is shown, for chainsaws, the calm made from the old fishing bora.

Cutting device

In conclusion, I want to mention such an adaptation as a bed for cutting boards with chainsaws. In fact, it is a mini pailorama that can be collected on its site, to install in it with chainsaw and dissolve the trunks of trees on the boards.

Pylorals from chainsaws are quite a lot, there are factory, such as Logosol, there are homemade. We invite you to watch a video about the work of the self-made, budget silt from chainsaws.

Output

The chainsaw is capable of performing not only the transverse or longitudinal cut of the tree, it allows you to create creativity and inventions based on the set of tools and devices useful in the household, allows you to alleviate everyday work or even rest in your pleasure.

Remember that using homemade nozzles For chainsaws, it is worth being attentive and not overloading its engine, it is also worth not to forget about safety technician, since all responsibility in case of injury is on you.

The company CHTILE produces not only chainsaws and motocos, but also consumables for them. In this article we will talk about the saw chains of the calm, their types, marking, characteristics, compare with competitors.

All the chains of the calm are labeled, thanks to which they can be identified and defined, for which models chainsaw and types of work they are intended.

In the title of the chain model, its length (number of links), step and width are indicated. Also indicated type. Type, this is an internal proprietary designation, thanks to which the company's specialists can determine the form and shape of the cutting tooth, the size of the link and the connecting elements. The designation can be complete, and can be reduced by capital letters, for example, the PICCO Micro 3 chain is abbreviated with PM3.

The usual user is such information, in principle, not needed, because in order to properly choose the headset, it is enough to know chainsaw characteristics, planned volume and types of work.

For the convenience of choice, on the company's website, the company has an electronic consultant, which automatically generates a list of chains suitable for a specific chainsaw model.

The service is convenient and understandable, but it has one big minus, you can select chains only for. If you have another chainsaw, you will have to look for characteristics and title, which is not very convenient, since the list of models is large enough.

Below we offer to see a short but interesting and informative video of the roller about the chains of the calm, the process of their production and quality control.

Now consider specific models of the chains of the calm, their marking, characteristics and purpose.

Picco Micro (PM)

A low profile calf chain is recommended by the manufacturer for use on lightweight chainsaws and bodies. The feature of the chain is soft cut, with a reduced return. It has four versions that differ in the number of links. It:

3/8 "P Picco Micro (PM), 1.3 mm (50);
3/8 "P Picco Micro (PM), 1.3 mm (51);
3/8 "P Picco Micro (PM), 1.3 mm (55);
3/8 "P Picco Micro (PM), 1.3 mm (56).

Such a chain can be used on chainsaws of Caltil MS, and. etc. Recommended retail price from 490 to 550 rubles. The specific price depends on the number of links. Also, the SHIHL saw chain can be sold with bays of 50 and 100 meters, can be riveted with a rivet-splitting machine of a catch or similar. Information on how to rivet properly, can be found on our website.

3/8 "P Picco Micro Mini 3 (PMM3), 1.1 mm

Distinctive feature - The most narrow propyl. Abbreviated designation PMM3. It is recommended for the elementary level chainsaw, as well as vysotherais and custores. It has three versions:

3/8 "P Picco Micro MINI 3 (PMM3), 1.1 mm (39);
3/8 "P Picco Micro MINI 3 (PMM3), 1.1 mm (44);
3/8 "P Picco Micro MINI 3 (PMM3), 1.1 mm (50).

It can be used on chainsaws Calm MS, 180 ,. Refers to the class of comfort, since it has a minimum vibration and return.

Important: a chain with a width of 1.1 mm should be used with the appropriate bus, otherwise, it will hang out in the landing socket, which will lead to rapid wear, both the headset itself and the guide bus.

1/4 "P Picco Micro 3 (PM3), 1.1 mm

It is recommended specifically for vysotherase and compact chainsaws, for example, MS 150 TC-E or MS 193 T. It is considered exclusive, since it does not have a standard step 1/4 ", narrow and flat design. It has three versions whose length is 56, 64 or 72.

3/8 "P Picco Micro 3 (PM3), 1.3 mm

This model refers to the comfort class, and is intended for professional use on lungs and compact chainsaws. The chain is characterized by high performance, comparable with the standard performance, while simultaneously reduced returns, which is achieved due to the low profile. There are several versions:

3/8 "P Picco Micro 3 (PM3), 1.3 mm, 50 units;
3/8 "P Picco Micro 3 (PM3), 1.3 mm (51);
3/8 "P Picco Micro 3 (PM3), 1.3 mm (55);
3/8 "P Picco Micro 3 (PM3), 1.3 mm (56).

3/8 "P Picco Super (PS), 1.3 mm

Picco Super, according to the manufacturer's application, this is the first chain in the world, which has a bit-shaped tooth. Developed by the company CHTILE specifically for forestry professionals. Easy embedding, comfortable vibration level and smooth move. It has a clean surface of the cut, which is important for those who deal with wood carvings with help chainsaws. Execution options:

3/8 inches P Picco Super, 1.3 mm (44);
3/8 inches P Picco Super, 1.3 mm (50);
3/8 inches P Picco Super, 1.3 mm (55).

It can be used both with professional, semi-professional and household models chainsaw.

1/4 "Rapid Micro Spezial (RMS), 1.3 mm

Designed specifically for curly cut on wood. A distinctive feature, this is a shortened upper edge of the tooth, thanks to which it is not necessary to put pressure on the saw, so that the chain is crashed into the wood. It is characterized by high speed and smoothness when performing curvilinear cuts compared to conventional chains having a similar step 1/4 ". We are produced in two versions:

1/4 Rapid Micro Spezial, 1.3 mm (56);
1/4 Rapid Micro Spezial, 1.3 mm (64).

A series of chains Rapid Micro

The Rapid Micro chain line includes about 10 species, each of which has an average of three versions with different step characteristics and widths. The chains of the Rapid Micro series combines the shape of the tooth and the quality of steel. They are recommended for use on chainsaws of the calm operating in agriculture (semi professional). Brief designation RM.

Rapid Super Rule (RS)

Danish ruler is designed for professionals. Of course, no one forbids using such chains on household models chainsaw, but their cost is slightly higher than ordinary chains, for example, Picco Micro 3 will cost much cheaper.

As the manufacturer declares, Rapid Super is capable of working for a long time without sharpening and their performance is not just high, but extremely high. Such a headset easily copes with a strongly polluted or freezing wood. If you look at the versions, it becomes clear that this chain is definitely not for light and compact chainsaw. The maximum size released on sale is 105 units, it is almost twice as long than the chain on the calm MS 180.

Rapid DURO 3 (RD3), 1.6 mm

This line of the chains of the calm has an increased resource, due to the use of special solid alloys in them. Designed for use in agriculture, i.e., recommended for the semi of professional models of the calm. A lot of performance is quite a lot. Rapid DURO 3 (RD3), 1.6 mm may have a step of 0.325, 3/8 or 0.404 inches. The most expensive chain in this line is about 2500 rubles. and has a length of 66 units.

3/8 "Rapid DURO RESCUE (RDR), 1.6 mm

This is a special chain of Stihl, for emergency rescue work, in our country she received the nickname "SuperZub". Due to the victorious attack on the cutting edge of the tooth, a tree with nails, glass, brick and other building materials can saw. Where the most complex conditions and the usual chain will be helpless, Rapid DURO RESCUE (RDR) will do everything as quickly as possible.

It has a length of 72 tooth, in other embodiments is not available, recommended for use on emergency-rescue saws, for example, MS 461 R 6 with a capacity of 4.4 kW. Rapid Duro price recommended by the manufacturer from 9060 rubles.

All prices we voiced in the article are taken from the company's official website.

We offer to watch the video, which shows the comparative test of the saw chains of the calm. Video in English, but it shows that in the trunk of a tree, on which the speed test is carried out, a concrete insert is filled. The usual headset does not cope even with three cuts, while the special makes more than 10 cuts and retains performance.

What to use a chain for longitudinal sawmills

From users of chainsaw, often the question is: what a chain is suitable for longitudinal sawing and are there any chains specifically designed for these purposes.

At the moment, there are no chains specially designed for sawing the tree trunk, and most likely will not appear, since any saw chain can be used for these purposes. The difference between the usual headset, from the longitudinal - sharpening angle.

Using the machine for editing, it is possible to make a special one from the usual headset - facilitating the longitudinal cut. Information on how exactly this is done, you can find on our website.

Which chain is better than the calm or Oregon

Choose which chain is better, the calm or Oregon is quite difficult, since they are almost the same in quality. Oregon, as well as County specializes in their production and invest in development, constantly improve and produce new models.

If you compare at the user level, Oregon is a little softer, they are faster than stupid, but they are easier. Schtilevsky - almost all kanes, the metal is hard enough, but it holds the edge longer longer.

Interesting. According to experts, the question of the quality of the headset is relative. Many users first apply for lubricant spent motor oiland then they say that one or another model and brand chain is poor quality, although the reason for premature wear lies in metal chipswhich is contained in any exhaust oil, even the fact that before the fill managed to settle.

Causes of Blank Saw Headset

Sometimes, during a chainsaw, the headset can break. This phenomenon is not frequent, but from time to time. The reasons may be somewhat, the first and most common, it is strong wear. In the process of work, the edges rub about the tire, as a result, the metal is gradually erased and the chain, without holding the load, is stripped.

Important! The use of high-quality adhesion oils can significantly extend the life of the saw headset.

The second reason is the untimely replacement of the leading sprocket and the saw tire or their replacement separately. According to the recommendations that producers give, saw headset, tire and leading asterisk must change with a set. This will warn wear, stretching and gaps as a result of increased loads.

Third, this is marriage at. The machine disk rotates with high turns and if you adjust the depth of the groove incorrectly or for some reason, the workflow of the machine will increase, then the split of the second is enough to cut the edges of the junction link. If after sharpening it does not control its quality and the presence of curved links, then in the process of operation under load, the cut link may break.

The fourth and last, this is a defect of rivets. Frequent cause Chain rupture is the wrong connection or reuse of connecting links. If you have broken the cutting headset, then the information about that will be very useful.

Sharpening machine stihl.

In conclusion, a little about sharpening machine Calm. To date, the official website of the company presents the USG machine. The sharpening on the machine works automatically, and the feed is carried out manually. The machine is capable of pointing not only the cutting edge of the working tooth, but also the depth limiter, which is impossible to do on similar machines. For details on the sharpening Machine of the Castle and his work, see the video.

Output

The company CHTILL, produces high-quality chains for its chainsaws and votors, which are popular, both among professionals and ordinary users. If you compare the STIHL chains with competitors, then they are a little stronger, but more difficult to succumb manual sharpeningThat for ordinary users is not very good, since for sharpening you have to contact the service center.

Chainsaw is a tool that is designed for wood harvesting and should be in every farm. Special adaptation for chainsaws will help increase the potential of the instrument. If you add the device with special nozzles, it turns out a boat engine, wood cutter and much more.

Device for longitudinal sawing

Sometimes during the construction or repair of wooden structures, sawing wood is required. Purchase such equipment for homework is expensive, so it can be collected independently. The device for the longitudinal sawmill logs will help to prepare a large number of boards and sawn timber.

Before proceeding with the instrument assembly, you need to prepare the drawings and carefully examine them. The whole design consists of a simple frame and guide. So that the cut is obtained smooth, the guide is fixed on both sides of the base. Manufacturing process:

Of square pipe Make a framework. Cross section - 20 × 20 mm. You can use a simple children's desk.
The size of the clamping part should be from 50 to 60 cm. It is placed so that the end of each part formed the basis for the next mechanical node (cross). So that the cross is reliably held, it is welded to the design.
For the installation of bolt screeds in the crossbar, the openings of the electric drill are done. For fastening the tire in the central point, the small protrusion is left.
Such mounts are installed in the upper part of the structure. In this case, the width of the bolt fixtors should be greater than the tire height.
The support frame (10 cm wide is less than a length) make a rectangular shape. On both sides, the holes for nuts are done, perpendicular to the 2 parts of 10 cm perpendicularly. Welding apparatus Nuts weld to the support frame.
To facilitate the longitudinal sawmill of the chainsaw log, the design is equipped with handles. For this, a pre-bent metal part is welded to it.
Then all the finished parts of the design are collected together. To do this, in the inguinal parts, clamps and a tire of chainsaws are inserted. What width is the blanks, depends on the gap located between the sidewall frame and the tire. Therefore, the tire of chainsaw is important to fix right.

To increase the speed and quality of sawmills, a chain for longitudinal cutting of products is installed on a longitudinal sawing chainsaw.

Other devices

Facilities for chainsaws in the store are presented in a large assortment. The devices have their advantages and disadvantages that affect the efficiency of the device in different ways. In order not to spend money on their acquisition, you can make a device from devices for chainsaws with your own hands. For inventors who love to make at home, such a tool will become an indispensable assistant.