There are two standard floor heights of floor door handles: either 90 mm or 1 m.

Door handle height 90 mm.

The first thing to note is that the height of the installation of the handles on all doors in the apartment should be the same. IN otherwise The knobs that are installed below will be strongly rushing in the eye, even though the doors would not stand nearby. When the handle is installed at an altitude of 90 cm from the floor, the door looks slightly higher than it actually is due to the "low waist", which the handle forms

Minus setpoints at such a height.

This height door handle has one minus. Plumbing retainer, which is always located under the hand, will be too low.

Door handle height - 1 meter.

Standard and more generally accepted option is the installation of the door handle at a distance of 1 m. From the floor. Most doors, if it is standard canvases, have a height of 2 m. Thus, the handle divides the door exactly in half, forming two equal halves - on top and bottom. In this case, the retainer that is always installed under the handle is much more convenient to use, as it is not as low as in the first case.

The installation distance of the plumbing retainer from the handle depends directly from the mid-scene distance of the lock. Possible rangelists of locks are 75 mm., 85 mm., And 90 mm.

If the handle and the plumbing retainer has a massive, large outlet, such as That wisely will choose the lock with the largest mid-scene distance. Otherwise, the handle and the retainer will be visually stripped to each other. Between large sockets will be a very small distance that is aesthetically not very beautiful.

Install the handles above or below are not accepted.In any case, one of two options always remains your choice and taste. The installer should only recommend your vision to you, but fulfill everything clearly on your instructions.

It would seem, such little things how to buy doorknobs On the site and install very simple. However, there are certain rules and important recommendations. The mounting height of the door handles is determined for the purpose of convenience, because they use it extremely often. It is the combination of various trifles of comfort.

Door handles: ergonomics and usability

Under ergonomics, it is customary to understand the convenience of using the subject. This form includes his form, and location, dimensions. Handles for doors The manufacturers strive to make the most comfortable form. It depends on the size of the door and the middle size of the hand:

on the interior doors Frequently installed balls - balls (KNOG) - they are very well placed in the palm, and the distance between the ball and the door blade allows you to fit your fingers

input massive doors are equipped with bracket handles large sizesto withstand the weight of the door when opening, but such a thickness that is easy to grab the brush

purpose door handles are universal, and their form reduces the desired pressure of the pressure, at the same time comfortably lick in hand

If the manufacturer is responsible for the form, the installation height determines the owner of the room. Using this opportunity, you can enhance the comfort of the family or the working team.

Generally accepted, universal height of installation handle for doors standard size It is considered 1 m from the floor, and the indentation from the edge is taken at 10 cm. The indicator is calculated, based on the average growth of about 1.7 m and the length of the hands 70 cm. Naturally, this height is not suitable for all in the family, but in the work premises it is quite Applicable.

Personal features

Obviously, the standard indicator changes depending on the growth of family members, such as the handle, features of the room. Calculate individual height is very simple:

going to the door, lower your hand along

make a mark at the palm level

add up 15-20 cm

So that the door handles are comfortable to everyone, you can make markers for each and take averaged number. Especially relevant this will be jointly living people with a large difference in growth.

Some exception refers to children. Of course, for the baby, door handles should be placed significantly lower, especially on the door of the children's room. If the repair fell on teenage years Child, you can put the handles for the doors on the middle for adult height. All the same, it will soon be equal, and then he will overtake parents for growth.

Sections Articles:

The range of products presented in the market of interroom doors amazes with its diversity of forms and colors. In addition, products have different dimensions that meet any customer requirements. Most often, depending on the number of sash, the width of the door design changes. However, most often the height of the doors and installation sites of the handle are standard.

In most cases, the door canvas comes complete with a box that is an important detail all design. The product has a P-shaped form and is installed around the perimeter of the doorway. Thanks to the frame, the door fixation is made. The size of the box differ significantly from each other and depend on the dimensions of the door canvas. therefore the best solution It is the acquisition of a prefabricated kit.

The manufacture of the frame is made by comparing BRUSEV. In this case, the box can have a width in the range from 15 to 40 mm. The reliability of the design is achieved when using a frame of 30-35 mm wide. The thickness of the product depends on the depth of the walls and for the convenience of installation should be equal to it.

The height of the interior door with technological gaps and the box directly depends on the size of the canvas itself. In the absence of a threshold in general value The dimensions of the structure include the size of the frame in 40 mm, the upper gap, which is 3 mm and the plane itself.

Standard dimensions

About 30 years ago, all interior doors in the country had absolutely identical parameters in the form of two approved by standards Values:

• The door height in 1900 mm for technical premises in the form of bathrooms, bathroom or kitchen;
• The height of 2000 mm is provided for the doors in the living rooms and bedrooms.

In this case, the height of interroom doors, in most cases, are standard 2100 mm. Such doors are labeled M21.

Currently, the dimensions of the door cloth are more diverse and mainly depend on the size of the floor from the floor to the ceiling. There are about 30 guests governing the recommended dimensions. door structures. However, these indicators are not mandatory to use.

Manufacturers mainly produce products based on their own calculations. In addition, the finite size of the product affects the configuration of production equipment. Thus, the standard steel interior doors with a height of cloths ranging from 1900 to 2300 mm.

Non-standard sizes

Given the variety of products manufactured and their dimensions, the concept of non-standard design is doubtful. These products include a number of cloths of very rare sizes from 2.3 to 2.5 m wide, requiring special installation conditions. Their installation is possible in apartments and houses with the size of the floor walls to the ceiling from 2.8 to 3 m.

The manufacture of doors above 2.5 m in residential premises is unacceptable from an engineering point of view, even in the case of an individually designed house.

Payment

In any situation, even assuming the dimensions of the doorway, necessarily takes into account the magnitude of the walls in the flooring from the floor to the ceiling. The most acceptable dimensions are:

• At the height of the walls at 2500-2600 mm doors in 2000 mm;
• For the wall height in 2600-2800 mm, interior doors in 2100 mm are acceptable;
• The ceiling at 2800-3000 mm allows you to install door structures with a height of 2200-2300 mm.

Most often, the installation of doors height in 1900 mm is due to the design features of the design of the entire premises. The widespread use of such small openings is inappropriate, because it may be insufficient for comfortable fracing furniture items.

However, at present, thanks huge amount individual projects and redevelopment, the most common sizes of the height of the door structures are 2100-2000 mm.

In the case of installing non-swollen door system, and arches either sliding structures, canvate can have any height, including the maximum possible.

Eurostandarta

Undoubtedly, the dimensions of the door canvases are increasingly dependent on manufacturers. Most European factories produced products from 2.1 to 2.3 m. This is due to the features of the forms of the design of the box and the door canvase. Their doors have no straight angles, but roundings with a small radius. Such a feature arises due to the use of rounded transitions from one frame element to the next. Thanks to this, the door is forced to increase by 10-30 cm.

Options for door handles

Many manufacturers of door structures at the time of sale are mounted in the canvas all the necessary accessories, including handles. The height of the handle is almost in each door of 1 m from the floor. It is possible to purchase cloths with grooves prepared at the same level, but without the handles installed.

Products that do not have at the time of sale or installed door handles, no grooves harvested under their installation, in most cases are equipped with a special reinforcing timber installed in the place of the intended installation. Thanks to such insertion, the installation of the handle and locks will be quite simple. However, in this case, the recommended height of the handle is 1 m. The permissible deviation is upwards or down from the nominal value should not exceed 10 cm.

Development of such a standard was carried out under a person with an average growth of 1.7 m. With the inconvenience of using such door structures, it is necessary to purchase a solid cloth and perform independent installation Handles at a comfortable height.

Definition suitable for place handle

For determining comfortable height The location of the door handle uses two similar methods of measurement:

• By wrist level;
• In the height of the elbow.

In the first case, it is necessary, being near the door, lower your arms along the body. In the wrist area on the door is made a pencil mark. Further, 20 cm. The handle located at this height is counted on this height, it will be very convenient to use for a person.

Also, it is enough to note the location of the elbow of a person. In most cases, the height of the handle, independently installed in the interior door, based on the described methods is almost the same.

Children's room

Despite the fact that the children are very difficult to reach and use the handles intended for use by adults, the installation of individual door handles is not an idea. An additional hole in the canvas can significantly ruin it. appearance. And the additional handle itself will quickly quickly become unnecessary.

The best way out in this situation is the installation of the handle with the pressure type of the mechanism into the interior doors. In this case, for the convenience of using the product, it is enough to sue a thick thread or a lace. In this case, the door will easily open when a child without special efforts pulls down the rope. Undoubtedly, the device will be simply removed.

Self different shapes, styles and colors from famous brands.

The new door is installed, however, it is also necessary small, but at all important details. One of these parts is a door handle. But in order to open and close the canvas, it was convenient, you need to know at what distance from the floor it should be a door handle.

Standard installation of door handles

There are two main options, the first - according to the standard, the second - as convenient.

What is the standard? Usually handles on the input and set the intermedine of the canvas, i.e. At an altitude of 1 meter. Specialists this height has been defined as the most convenient to close, or open the canvas. Medium height The person in Russia is about 170 cm, and the length of the hands is about 70 cm, hence 1 meter (170-70).

However, every person is individual, and perhaps the standards are not at all suitable. After all, the main thing is to subsequently to you and your households it was convenient to use the block. In this case, the distance can be defined independently.

There is a simple but reliable way: Go to the door and lower your hand. Where your hand ends, make a mark, and add 15-20 cm to it up and calmly install the device.

There is another way, very similar to the previous one: Bend the hand in the elbow by 90 degrees, and at this level, make a mark on the canvas. It turns out, by the way, the same as with the adding centimeters.

However, it is not worth measuring the distance, standing at each door with a bent hand. It will be very convenient if you just measure how much you got in the first case, and take these sizes to other designs. If the knobs are everywhere on the same level, it is psychologically convenient for all members of your family.

It happens, true that the distance is determined not only by your desire, but also the appointment of the whole design or its design, as well as the peculiarities of production.

For example, children's. In this case, the meter for the child is clearly high. But it's not reasonable to make a handle, because it will grow up, and then what is the ugly hole on the door after the "raising" of the handles?

The answer is simple: they are different. In this case, it is very convenient to use a pressure structure - even if the child does not reach, you can hang the lace, securing it at the end of the handle. And then everything turns out like in a fairy tale: Derni for the rope, door and open. And when the child is growing, just remove the lace - and the owners are satisfied, and the door is a whole.

Features of production

Well, in the case of the peculiarities of production, everything is not so rosy. There are doors from MDF, on which the place for a lock or handle is labeled in advance. They are made of medium density chipboard. This is a marked place on standard height 1 meter, and it is in this place that wooden barberwhich is convenient to embed the handle. Deviations are allowed, but not more than 10 cm up or down, in the rest of the places such doors "empty", so that the knobs do not like everything in them.

Hello. Recently changed all interior doors in the apartment. The installation paid, and the accessories for savings decided to cut himself - all the tools for this there is how it is done, I know. But the question arose: What should be the height of the floor door handle?

Especially in the children's room: children are still small (3 and 6 years old). If you now put, as it is convenient for them, after a few years you will have to redo, or completely change the door.

Hello, Denis.

There are standards for installing door handles, but everyone has the right to ignore them and place them where it is convenient.

Standard height

For reference. This figure is not accidental. The experimental way was found to be that this is the most convenient height for the middle height person (170 cm), which allows you to easily open and close the canvas, insert the key to the lock.

Keep in mind that on many on sale door canvases, you can only install the handle on this height. This applies to doors made from an array, but from chipboard MDF.

• Such structures are a frame of a bar, lined with decorative panels.
• The bar, intended for the cutting of the lock or handle, is located just at the standard height. Change the arrangement of the handle can be a maximum of 10 cm up or down.
• The rest of the space is empty or filled with corrugated cardboard, in which accessories will not hold on.

Comfortable height

However, all standards are calculated from average indicators. And if the growth of a person is very different from them, he can be uncomfortable such height.

In this case, determine at what height door handle should be in your home, you can independently in one of the following ways:

• Come installed door with lowered down hands. From the point where the fingertips touch the canvas, set up 15-20 cm.
• Even easier, standing near the door, bend one hand in the elbow at right angles. This horizontal line is the level of installation.

But the house usually lives people of different growth, as in your case. Therefore, the standard height is still preferred - it is relatively convenient and is suitable for any adult person.

As for the door to the children's room, then this task is to solve only you. Are you ready for the fact that in a few years the price of the door cloth of your model will grow or will not be left at all on sale? Or to the fact that there will remain a through hole on the place of the previous installation?

Ideally, the handles on all doors should be on the same level. All the households are accustomed to such a position over time, and use handles what is called "on the machine".

A three-year-old child can easily reach a height of one meter. It will not be able to open or close the door with your own hands, only if she is very tight or uncomfortable by itself.

Council. Install on all the cloth pressure handles with smooth running. Even if the baby is hard to reach it and click on the handle temporarily, you can fix a chain or lace and pull for it.

Summary

If you look at the video in this article, you will see that all the wizards install the handles at a standard height, if it does not specifically stipulate. And this is the most correct decision.

We believe that otherwise addresses the question, at what height do the door handles put, it is worth only in the case of a person with limited physical abilities in the family. Children grow quickly, not necessarily adapt to them.