Therm X2 models have a higher energy efficiency, compared with the Plux radiators.

Markings of new radiators:

The model range of FKV, PKV radiators, PHV 12, 22, 33 translated into a new classification. Marking new radiators will look like this:

Old Designation - Profil-V FKV 220510
New designation - THERM X2 PROFIL-V FTV 22050100, Article: FTV 22 050 100 1 R 2K

Full description: Kermi Therm. X2 PROFIL-V Type 22 BH 500x100x1000 mm
1 - white-color designation RAL 9016 (when ordering other colors is simply written by RAL)
R - standard connection on the right (L - connecting to the left / no extra charge / under the order)

Energy savings by 11% arise due to the fact that only the front part works for some time. Heating device On 2 kW - two panels on one kilowatt, - the radiator gives no 2 kilowatta, and 1. The rear is heated after 15-20 minutes. At this time period, discomfort is felt, but they are obtained by the very 11 percent of energy savings.

There are defective systems in which there is no balancing, and an insufficient amount of moving fluid passes through the device. On thermograms, heating panels only in the upper part, which indicates a lack of coolant. If it is lacking on both panels, then the streams are distributed in such a way as to have enough at least one. But this method does not work. By installing a radiator with local seasons, we further increase the system hydraulics, which leads to a lack of coolant and one panel. There is a chance that if there is some kind of balance on balancing, the principle of therm x2, somehow, is realized and something will be given to us. If systems are clamped and lacking fluid, then there is nothing to clamp, and again we come to an increase in the load. Therefore, the implementation of this technology in well-minded, correctly balanced and collected systems is impossible, because this technique works only the first 10-20 minutes after the thermal head opened the radiator.

If you want to buy Kermi radiators with lower connection, you will not be able to refuse to use X2, as it is already built into them.

Profile compact kermi radiators Therm X2 PROFIL K is made of sheet steel and have a uniform two-layer varnish coating that does not highlight harmful substances for ambient During the heating regime. The surface of the degreased, treated with iron phosphate, is primed by cathode varnishing according to the method of katofanese dive and powder spraying in accordance with DIN 55 900-FWA. Standard: white color Kermi (RAL 9016). Color varnishing - on a separate order. 4 lining (for fixing the radiator with a length of more than 1800 mm - 6 linings), including the corresponding installation kit with consoles with holes, installed plugs and air vent. All radiators are tested for tightness and ready for installation. Packed cardboard and covered with film. Protective packaging for mounting.

At the factory, the radio is equipped for use in two-pipe system, with bypass threaded compound (accessories), also suitable for use in single-tube systems (for one-pipe system - Setting the valve 8). The quality control system is certified in accordance with DIN EN ISO 9001: 2000. The execution meets the previous directives of the former Baguv (the Union of Insurers at the expense of the federal budget). Certification in acc. with GOST.

• Connection: 4 x G 1/2 "Inner thread
• Working pressure: Max. 10 bar
• Wednesday: hot water up to 110 ° C

Kermi Therm X2 radiators are ideally compatible with all heating systems and, thus, are an excellent response to all demands of the heating technology of tomorrow. Postedy technology X2, with an increased up to 100% radiation intensity, takes care of best use Kpd. energy efficient sources Heat. Optimal heat transfer to the room and high level thermal comfort even at low system temperatures. So, Thermm X2 radiators are best suited to all combinations: with heat pumps, Max technique. use of heat combustion of fuel, solar collectors, as an adequate, ensuring the future form of heat transfer already in our time configured to maximum efficiency Energy use. And also they are the best alternative to rehanging the heating system without panel heating.

THERM-X2 technology It is used in all profile, smooth, hygienic and multiphanner radiators Kermi 12, 20, 22, 30 and 33 of the type. And it sets absolutely new scales in the steel segment panel radiatorsbecause it has a number of unique advantages. With the release of Therm-X2 radiators, Kermi makes a priority for optimizing and energy efficiency of heat transfer process: new technologies reduce the heating time of the radiator to 25%, the radiation intensity increases up to 100%, while energy savings reaches 11%. What are the steel kermi radiators And why are they energy-saving?

Why the energy-saving radiator Kermi Therm-X2?

The success of energy-saving radiators Kermi is based on the newest patented principle of therm-x2, which is based on the consecutive flow of the coolant through the radiator panels. If in panel radiators for the previous technology, all panels were heated at the same time, then according to the principles of the therm-x2, the coolant from the feed pipeline first enters the front panel. In part-time heating systemFor example, in the off-season, the front panel power is usually enough to warm up the room, and the rear panel only performs the function of the heat screen. And only when a high power is required, the back panel begins to give heat in full power and, due to its convection properties, contributes to the rapid heating of the room. Thus, due to the greater temperature difference between the supply and return pipe, the energy efficiency of the radiator increases and the losses during the distribution and heat generation are reduced.

For the maximum efficient use of energy. And maximum comfort.

As the independent qualified studies have shown, as a result of the energy advantages of heat transfer with the sequential flow of the coolant in steel panel heating radiators Kermi Therm-X2 can be achieved as opposed to other panel radiators not only significant energy efficiency, but the maximum thermal comfort is also created. Our feeling of comfort in the room strongly depends on the intensity of the heat radiator thermal radiation. Even when the thermometer shows the desired temperature, but the radiator does practically do not radiate heat, there is no minimum sensation of comfort, the room is subjectively perceived cold. FROM radiators Kermi The situation looks different. It has an average temperature of the front panel is significantly higher, due to which in normal operation mode, the radiation intensity rises by almost 100%, which at any time guarantees the feeling of maximum comfort.

The full potential of the energy efficiency of the system heating Kermi. The thermal-x2 technology can be fully disclosed only if the heat transfer process is involved. In energy-saving radiators Kermi, the high efficiency of thermal energy sources is maintained at all stages of heat transfer. It is worth noting that with the use of the innovative technology Therm-X2, the total energy savings during heat transfer can reach up to 11%! If you think that 75% of the total energy consumed in the economy falls on heating, will open huge opportunities saving costs.

Compared to traditional panel radiators, the operation of energy-saving radiators Therm-X2 allows annually to save over 6,000 kilowatt-hours in the buildings of the old building. It would be possible to bake 6000 pirogov, 15600 times to shake the electric shaver, 6270 times to wash, 42 years to operate the refrigerator. If all 14.5 million alone and two-quarters were transferred to the technology of Cermi Therm-X2, one could save over 9 billion liters of fuel oil into the year. And CO2 emissions - about 24 million tons each year. This high energy saving potential allows you to become panel radiators by Kermi starting point in the development of new heating systems that meet high demands of tomorrow. For the benefit of man and nature!

Kermi - the best energy-saving radiators of 2012

From the moment of its appearance innovative technology Therm-X2 causes great interest Both specialists and ordinary consumers. The program of success of flat panel radiators Kermi continues further: the jury of the prestigious Plus X Award jury noted the entire product line for outstanding characteristics of the Plus X Award 2012, and it was noted as " Best Product of the year 2012 "For functionality, environmental friendliness and quality. Along with the impressive results in the energy saving, the judge noted the versatility of the technique of the KERMI THERM-X2 family. Whether heat pumps, solar collectors Or maximum use of heat combustion of fuel - energy-saving radiators THERM-X2 right choice In each case. Especially if we are talking about the maximum thermal comfort in combination with the best efficiency. Radiators are connected to any heat source and have already saved a significant part of the energy consumed during heat transfer. It makes the therm-x2 very strong component "Kermi Wärmesystems X-Optimiert".