There are many options for solving hot water problems. In this case, the Electrolux gas water heater is often used, which is able to cope with its tasks for a long time, even under the condition low pressure... The equipment meets all quality and safety criteria, is equipped with various sensors and controllers that monitor the operation of the device.

Technical features

Electrolux water heaters are considered reliable and safe units capable of operating both at one or several water intake points. That is why they are successfully used in apartments, private houses, country cottages or office buildings.

All indicators are displayed

The performance of devices depends on the correct choice of model, focusing on personal preferences and needs. Based on the information specified in the operating instructions, it should be noted that all modifications of Electrolux gas columns differ according to 5 main criteria:

• power indicator;
• type of control;
• type of ignition;
• security level;
• design solution.

To determine the option, you should study each item in detail and highlight for yourself the main criteria by which the selection will be carried out.

Power

At the moment, the company produces modifications of three groups, differing in the level of performance, power:

• low-power - 17-19 kW;
• medium-power - 20-24 kW;
• powerful - 25-31 kW.

Each of the options assumes work on a certain number of sampling points. For example, low-power ones are capable of functioning with only 1 mixer, medium-power ones - for 2-3, powerful ones - from 3 or more water intake points.

Control

Units with a manual control method have long been considered obsolete, so the manufacturers of gas water heaters have developed an updated version. Modern models are equipped with a modulating burner.

Priority is given to elementary equipment management

This aspect controls the temperature regime of the water and maintains it at a given level even when the pressure in the water supply system decreases or increases. The selection of the temperature will be carried out at an automated level.

Type of ignition

The manufacturer of geysers Electrolux produces several series with different kinds ignition. Modifications come to work according to one of the following principles:

• manual ignition with a lighter or matches is an outdated method that is practically not used in modern models;
• automatic ignition - carried out from a turbine or batteries, is considered the most reliable, since it starts working only when the tap is opened;
• piezo ignition - this option it is used in the Electrolux Nano Pro series and differs in the principle of switching on, you need to press a key.

Versions with the first method of ignition are very rare on sale, more often in the secondary market. Automatic ignition is considered the most convenient, but here you will need to regularly change the batteries. Piezo ignition can bring inconvenience when turning on the gas water heater when the user is at arm's length.

VIDEO: How to light up correctly instantaneous water heater

Security level

The Electrolux gas water heater is equipped with a 3 or 4-level security system. In the event of dangerous malfunctions in the form of a gas or water leak, an increase in pressure in the pipeline system, an emergency shutdown device is triggered in the device. Also, situations that are hazardous to the user's health include the following:

• the formation of reverse thrust or its absence;
• damping of the fire in the burner.

It should be noted that backdraft formation is considered a particularly dangerous factor in rooms with a chimney. When choosing a chimney gas water heater, you should pay attention to the presence of an automated shutdown function in its options.

Design solution

The range of equipment of this brand is diverse both in terms of technical parameters, and by the presence of various additional options. But there are also many design solutions that should be noted. For example, the company produces models for conservative personalities with a minimalist style; this series should include a compact modification of Electrolux Nano Plus geysers. There are more expensive variations, on the front panel of which you can install or change a picture that suits the general style of the room.

Laconic design and small size attract owners of apartments and country houses

But the most popular versions are units with a display that displays all the necessary information about the state of the device and its operation. Also, when a malfunction is detected, an error code is displayed on the screen. In operation, this is a very convenient and practical option.

Popular models of geysers Electrolux

Italian products are in demand all over the world due to their high quality, durability and safety. Among the abundance of the offer, users distinguish three versions of devices.

Electrolux GWH 275-SRN

This is an instantaneous water heater with a water treatment rate of 11 l / min. and a capacity of 19.2 kW. The design includes a piezoelectric ignition system with an open combustion chamber. The maximum level of water heating is 68 ° C, a gas control device is used as a security system.

Also available additional function in the form of a limiter temperature regime warming up. There are 2 main adjustment levers on the body, so with the task of how to turn on gas water heater there will be no questions.

Unit Electrolux 275 s classic design sold at a price of 6,000 to 7,000 rubles.

We look at the reviews - the only inconvenience is associated with the need to periodically change the batteries for automatic ignition.

Electrolux GWH 265 Nano Plus

The geyser Electrolux GWH 265 ERN Nanoplus has a low price - 8,500-9,000 rubles, thanks to which it is available to a wide range of consumers. The modification has all the necessary functions to ensure high-quality water heating.

The main advantages are as follows:

• compact dimensions;
• modern design solution;
• reliable burner consisting of of stainless steel;
• modulation device;
• low price.

Users also noted some disadvantages. Since the unit is assembled in China, if it malfunctions, it may be difficult to find spare parts. Also, the capacity of the unit for functioning at several water intake points will not be enough.

• Operating instructions for gas instantaneous water heater of the GWH 265 ERN NanoPlus series

Electrolux GWH 285 ERN Nanopro

The geyser Electrolux 285 Nano Pro is considered a more advanced modification, since it is equipped with 4 security levels:

• hydraulic valve;
• traction controller;
• ionization device for tracking the work of fire;
• device for determining the correct functioning of the unit.

This version was developed for houses located in regions where there are constant problems with the pressure level in the centralized gas or water supply system. The unit is not included in the classification of powerful devices, but at the same time it can function with a small indicator of water pressure.

Judging by the reviews of real people, the electrical equipment is of high quality, reliable, but heats the water too much, even with minimum values heating and high pressure. Some have noted problems with the heat exchanger.

Due to the average pricing policy for Electrolux devices, each consumer will be able to choose the most optimal modification not only for technical requirements but also cost. With a limited budget, experts recommend giving preference to the option with a minimum number of functions and average power. In order for the unit to provide the desired initial result, it is enough to adjust the pressure of water and gas.

VIDEO: How to fix errors e0, e1, e2 NanoPlus 265

Interruptions in hot water supply deprive us of the usual comfort. To prevent this from happening, you can use additional features receiving hot water... One of the devices dedicated to this purpose is a gas water heater. If you learn to use it correctly, the technique will be easy to operate. And one of the pressing questions: how to turn on the gas water heater?

One of the most common myths that scares away potential buyers- such a technique is dangerous to use. However, this bias is valid when using old-style models. Today, the units are improved and safe, many of them (for example, proposals from Bosch) are equipped with automatic protection , in which in an emergency the flow of fuel is cut off.

To know the terms of use, you should draw up represent it internal organization. Any firm's models include all of the following:

• gas equipment unit;
• water connection unit;
• exhaust connection system;
• other mechanisms;
• electrical appliances.

The body itself resembles outward appearance cabinet that connects to the water supply and gas supply. Heating elements located in its lower part and represented by the main burner and igniter.

How to use a gas water heater correctly? The device operates according to the following principle:

• cold water under pressure enters the heat exchanger - this will automatically open the fuel valve;
• the ignition device ignites;
• gas will go to the main burner, where it is ignited from the igniter;
• heat will heat the water;
• combustion products are removed through the chimney and exhaust system.

How to light up the apparatus

Before starting work, you must open the gas and water taps. There are three ways to light a gas water heater.

Manually

The manual method was used in old-style models... In this case, you have to light it with matches. Here it was necessary to perform a number of such preliminary manipulations:

• open the water supply connected to the device;
• open the main valve for the fuel flow to the igniter;
• light the wick with matches;
• turn on the valve (main) for gas supply.

The downside is that you have to turn off the wick manually. It is required to master the above practical skills and keep children away from the device.

With piezo ignition

We can say that this is a semiautomatic column. How to use this type of gas water heater? It will be enough push the button to ignite the wick in the combustion chamber. With the help of mechanical force, a spark is transformed - it is enough for the ignition filter to ignite. With this method, a number of mandatory requirements must also be met:

• in order to ignite the main burner, it will be necessary to turn on the main regulator in the fuel supply;
• the pilot filter will remain lit when the regulator is returned to the main position and the water is turned off.

There is a drawback in such designs - excessive fuel consumption. Vivid examples of such speakers are the Bosch WR 10-2 P miniMAXX-2, Nevalux 5111, Junkers WR 10-2 PВ models and other options.

Automatically

Fully advanced modifications provide automatic activation that is easy and safe to use even for beginners. Hydropower system most modern manufacturers(Bosch, his direct competitor Electrolux and many others). The process of starting a job is simplified to the limit.

1. For example, in the Bosch Therm 6000 O, the water pressure drives the turbine. It launches inside the device automatic system fuse of both the wick and the main burner.
2. Have manufacturer Bosch there are Therm 2000 O and Therm 4000 O lines, which carry out electric ignition from batteries (it will be necessary to monitor their service life).
3. Bosch AM1E series speakers already have a digital dashboard that shows you everything at a glance possible mistakes inclusion.

A fully automated process has one drawback: in many homes, the water supply pressure is low, and this may not be enough for the normal operation of the turbine. In addition, such devices are significantly more expensive than their less perfect counterparts.

Mandatory precautions

Any purchased equipment comes with instructions for correct operation gas water heater. The principle of operation of most of them is identical to that indicated above, but here the mandatory adherence to safety precautions should be highlighted.

1. It is required to conduct preventive cleaning gas water heater in order to avoid disruption of the efficiency of its work (how to do this, you can read in the document that goes to the gas water heater - instructions).
2. It is important to check the condition of the chimney ducts - this will help to avoid clogging.
3. If the device fails, you should immediately contact gas service... Unauthorized attempts to fix the problem are prohibited.

In more detail, the inclusion of the unit is shown in the video:

It is enough to understand once how to light the device to provide comfortable and instant heating. running water... And then you can simply enjoy the operation of this convenient heater.

2016-10-14 Evgeny Fomenko

To start Electrolux, you need water to enter the system. To do this, first of all, open the tap and drain the water a little. It is important to inspect all pipe connections for leaks.

After that, the gas valve opens. In this case, the characteristic sound of gas entering the system will be heard. After that, you can turn on the tap, from which the heated water should flow. The tap opens as soon as possible. If the water pressure is strong enough, the crackling of a piezo ignition spark in the column and the sound of gas ignition will be heard. In order for the water heater to work, the pressure must be in the range from 0.15 to 10 atmospheres. After a short time, the water will heat up. If the column is new, the water may have a slight machine oil odor, which will wash off over time.

When using the Electrolux gas water heater, it is not recommended to dilute heated water with cold water. When turned on cold water resistance is created for hot, the flow decreases, the column can go out. It is necessary to set a comfortable temperature level in advance and adjust it as needed on the column itself. To make the water a little hotter, you can reduce the flow of water. But at the same time, if the pressure is too low, the flame will automatically go out.

Regular use

To extend the service life of the Electrolux gas column, it is important to adhere to several recommendations during use. hot water.

The most expensive part of a column is the thermostat. In Electrolux 275, 285 and 350 water heaters, the heat exchanger is made of copper. It is constantly in contact with hot water, therefore scale forms on it. It is not recommended to set the maximum water temperature. Optimum temperature for work 45-50 degrees.

Using the tap to the right of the display, you need to limit the water pressure in the column. This is to avoid sharp changes pressure in the structure.

If you know that the hardness of your water is high, it is advisable to install an additional purification system. Calcium and magnesium salts, which are contained in such water, quickly build up scale in the thermostat. Installing a filter at the inlet of the device will extend the life of the device.

Even if all the recommendations are followed, scale will still appear. According to the instructions, you need to clean the Electrolux column once a year. It should only be carried out by specialists. Workers clean the thermostat from scale and the burner from carbon deposits.

Safety engineering

Any gas equipment requires compliance with safety regulations. Before starting work, it is important to carefully read the official instructions.

Here are the main excerpts from these instructions:

• Columns Electrolux 275, 285 and 350 are equipped with gas attenuation control and water temperature limitation.
• First of all, with prolonged use of the gas water heater, from time to time you should check the draft of the chimney. To do this, a match is brought to it and the presence of an air flow is determined by the movement of the flame. Gas workers have special instruments for measuring the thrust force. It is recommended to check it every three months.
• For safety reasons, the window must be open during the operation of the column. A two-centimeter gap is made at the bottom of the door of the room.
• Install water heaters in a place protected from the access of small children. It is forbidden to independently make changes to the structure. Some parts of the water heater may be hot and burns.
• If you smell gas in the room, you should urgently put out the fire, disconnect the column, turn off all electrical appliances and call emergency service... Can't obstruct access to gas pipes and equipment, as well as tying clotheslines to them.
• If the column is installed in a room without heating, in cold weather, when it is not used, you need to remove water from it.

Advantages

Gas water heaters Electrolux 275, 285 and 350 have a number of advantages over other models of water heaters:

• Low price, simple construction and at the same time high reliability. Absence a large number fashionable electronics reduces the likelihood of device breakdown.
• Large and bright display. It also has an indicator of the battery charge, which allows you to replace them on time.
• Quiet work. Quiet start-up and low flame noise.
• High speed of heating water.
• The ability to work with a low water pressure.
• Easy to find accessories. Columns Electrolux 275, 285 and 350 are among the most popular water heaters. If you need repair or replacement, you can easily find the parts you need.
• High performance. Electrolux 275, 285 and 350 water heaters can heat 10, 11 and 14 liters per minute, respectively.
• There is protection against gas extinction and water overheating.
• Large and convenient gas and pressure regulators.

Among the disadvantages can be noted too high sensitivity of the throttle control knob. And a feature of all gas water heaters is the need high pressure water, without which it simply does not start.

If you correctly install the Electrolux gas water heater and observe safety precautions when using it, it will regularly supply you with hot water and will last a long time. Over time, users get used to the peculiarities of the operation of gas water heaters and consider them the best choice.

Gas water heaters today save many consumers of housing and communal services. This equipment can be found in apartments and houses. If you, too, have decided to follow the experience of the majority and acquire water heater, then first you need to consider several models. However, the primary task is still the choice of the supplier. The Electrolux gas water heater is quite popular on the market today. Some models produced under this brand will be discussed below.

Review of several models of geysers Electrolux: GWH 265 ERN NanoPlus

This model of equipment costs 6800 rubles. The column has modern electronic control and display with indication, which allows the user to control the operation of the device. The model has a heat exchanger made of acid-free copper, manufactured according to modern technology OXYGEN FREE. The heat exchanger is completely safe, reliable and durable. Column life is extended thanks to multilevel system security.

The geyser Electrolux GWH 265 ERN nanoplus has a rated power within 20 kW. The equipment has an auto-ignition. The case weighs only 7.8 kg. The design has an open combustion chamber. There is a power-on indication and a display in the equipment. In one minute, you can receive up to 1000 liters of water.

The Electrolux GWH 265 ERN nanoplus geyser does not have a control panel. However, the manufacturer took care of the presence of additional functionality, namely gas control and a safety valve. You may need the diameter of the chimney to connect the equipment. This parameter is 110 mm. Case dimensions are equal to 550x328x180 mm.

GWH 285 ERN NanoPro - Specifications

The described Electrolux gas water heater, reviews of which are mostly positive, has a number of advantages:

• durability;
• simplicity of control and management;
• ease of use.

As for durability, the model is provided with a heat exchanger, which is made using innovative technology. This increases its resistance to various negative impacts during operation. The design, according to consumers, is also distinguished by simplicity of control and management. The equipment is equipped with a panel with indication and display. With this interactive whiteboard system, you can monitor the temperature, the presence of a flame, the battery level, and the circulation of water.

Buyers especially emphasize that such gas water heaters Electrolux, the characteristics of which are presented in the article and must be studied by you before purchasing a product. They are distinguished by ease of use, because they have ignition electrodes that provide smooth, quiet ignition with ionization flame control.

Owners of gas water heaters who have already enjoyed their quality consider additional advantages:

• the presence of a safety thermostat, draft sensor, hydraulic safety valve;
• heating power adjustment function;
• intelligent control;
• European smoke removal technologies;
• universal chimney diameter.

Description of the column brand GWH 285 ERN NanoPro

This Electrolux gas water heater costs 12,400 rubles. It is an instantaneous gas water heater equipped with a stainless steel burner and a copper heat exchanger. The function of maintaining the heating temperature and smooth adjustment of steel are possible thanks to the modern INVERTER Control technology.

There is a heating temperature regulator and a power regulator on the device panel. There, the user will be able to find a key that is responsible for turning on and off. The operating status indicator is clearly visible. It will burn in green during burner operation. The analysis of the operation of the water heater and constant monitoring of the functioning are provided by the Intelligent control technology.

Model Specifications

The above described Electrolux gas instantaneous water heater has a rated power within 19.2 kW. The design has an auto-ignition function, gas control and an indication of switching on, but the remote control remote control in the equipment, no. The chimney diameter is 110 mm, the body dimensions are 578x310x220 mm.

Consumption of liquefied or natural gas during the operation of the equipment reaches 2.3 m³ / h. The column has no heating indication. The design is equipped with an open combustion chamber. The unit weighs 8.62 kg. The maximum water heating temperature is 75 ° C, while the capacity is 11 l / min.

Model reviews

The above-described Electrolux gas water heater, according to consumers' assurances, has many positive features, among them it should be highlighted:

• ease of management;
• the ability to control the operation of the device;
• electronic ignition;
• stainless steel burner;
• impressive diameter of the burner nozzle;
• additional microswitch.

With regard to ease of control, it is provided by power switches and a regulator, the latter of which is responsible for changing the temperature of heating the water. These keys are located on the front panel and are easy to find. Consumers consider a copper heat exchanger as additional advantages, as well as INVERTER Control technology, which provides the ability to maintain the heating temperature and smooth regulation. The microswitch is located on the body and is responsible for turning off the water heater if errors occur during its operation.

Description of the geyser GWH 350 RN

This Electrolux gas water heater costs 17,800 rubles. It is an instantaneous water heater with a stainless steel burner. In this case, the heat exchanger is also made of copper. The start-up of the device is simplified thanks to the piezoelectric ignition. The unit can operate in one of two modes. One of them is economical, while the other provides maximum power.

There are switches on the case with which the user will be able to adjust the operating parameters. You can carry out visual control of the presence of a flame due to the viewing window.

Model Specifications

The rated power of the equipment described above is 24.4 kW. There is no auto ignition and a remote control in the equipment, but there is an on indicator and gas control. Before purchasing, please note that there is no interactive panel in the design. The chimney diameter is 125 mm.

Cost of spare parts for Electrolux speakers

If you are interested in Electrolux gas water heaters, spare parts for them will also attract you. For example, a membrane for equipment can be purchased for 600 rubles, as well as a microswitch. But for the solenoid valve you will have to pay a little more - 700 rubles. The traction sensor will cost the consumer 900 rubles, while the ionization electrode - 1,000 rubles.

Conclusion

If you decide to purchase an Electrolux gas water heater, then you need to familiarize yourself with several models. They were presented above, and their description can help you to make right choice... First of all, you should pay attention to the productivity, which is indicated in liters per minute or kilowatts. This parameter is one of the most important.

For many consumers, the presence of a remote control and a display is quite important. With the help of the latter, you can monitor the operation of the device, control the water temperature level, changing it if necessary. In addition, you may prefer a water heater model that has mechanical or electronic control. The first option is more durable, while the second is modern. From time to time, both one and the other fail, but the cost renovation works will be higher if the device is more technologically advanced.