Soundproofing buildings great importance for human health and comfort. Especially noises in the workplace not only affect the working climates, but also significantly limit the ability to concentrate and perception. At high noise sound-insulating doors MHC Group production provides optimal protection.

They provide a pleasant acoustics, reduce the noise load, increase labor efficiency and protect health. Thanks to a special design door canvascertified insulating material and special door seals provide optimal sound insulation values. When used as a multi-purpose door, if necessary, it is also additionally possible to combine the properties of protection against fire and smoke, heat insulating properties. Since the reality of ideal conditions does not happen, 5 dB should be taken from the proven meaning of sound insulation. For individual compliance with the features of noise sources, your choice offers a wide range of 28 dB protection up to 45 dB for any construction situation. The use of sound insulation doors: doors for hotels; doors for offices, in the meeting rooms; Doors for sound recording studios.

Sound insulation doors And fire doors are similar to execution. Color gamut and all kinds of textures finishing materials used in the manufacture of sound insulation and fire fighting doors, allow you to solve the most exquisite design solutions. The standard thickness of the web ranges from 40 to 59 mm, and the dimensions of the door allow it to embed it into a variety of openings.

We produce sound insulation doors With the following types of coatings:

• Finish film

If you can not put wooden threshold In sound insulation doors, we can offer you automatic sound insulation up to 48 DB PLANET production thresholds, built in the canvas.

Since in the manufacture of sound insulation and fire doors, various plates are used, the doors can only be performed only smooth, with a patch panel and with a milled panel. The canvas can be as without a fold (quarter) and fold.

Models acoustic doors And the materials used.

DDZ RW 28 DB- reinforced sound insulation door, with an RW 28 DB index. In the manufacture of doors of this series, the RT7 tube chipboard is used, the production of the German company "Sauerland Spanplatte". In the strapping used a ram from an unexpected pine. Recommended for installation: as an entrance to the hotel room, if no fire resistance requirements are presented; in medical institutions, in offices, in administrative buildings. Facing: veneer, painting by RAL, cladding with plastic CPL.

DPZP EI 30 RW 32DB - reinforced door, fire-fighting door with fire resistance 30 min, sound insulation door with RW 32 DB index. In the manufacture of doors of this series, an extrusion wood-shake plate 33 VL is used, produced by the German company "Sauerland Spanplatte". In the strapping used a ram from an unexpected pine. Recommended for installation: in the premises to which requirements are presented with the limit of fire resistance 30 minutes: as an entrance to the hotel room; in medical institutions, in offices, in administrative buildings, technical premises. Facing: veneer, painting by RAL, cladding with plastic CPL.

DDZP EI 60 RW 35DB - reinforced door, fire-fighting door with fire resistance 60 min, sound insulation door with an RW 35 DB index. In the manufacture of doors of this series, an extrusion wood-chipboard 38 VL is used, produced by the German company "Sauerland Spanplatte". In the strapping used a timber from solid wood. Recommended for installation: in the room to which requirements are presented with the maximum limit of fire resistance 60 minutes: usually installed in the technical premises of hotels and public buildings, on the staircase Marsh. With the system of antipartery, in server. Objective: veneer, painting by RAL, cladding with plastic CPL.

DPZP EI 30 RW 42 - reinforced door, fireproof door with fire resistance 30 min, sound insulation door with an RW 42 DB index. In the manufacture of doors of this series, an extrusion wood-chip plate 45S3K applies with cork layers, produced by the German company "Sauerland Spanplatte". In the strapping used a ram from an unexpected pine. Recommended for installation: as an entrance to a hotel room; In the meeting rooms, in the office of the head, in record studios. Facing: veneer, painting by RAL, cladding with plastic CPL.

Soundproofing doors

Soundproofing building structures

Request value

Fill out the form below indicating the necessary products and we will give you advice at the price.

Sometimes it happens that next to the apartment is the elevator mine. In this case, the tenants face such a problem as noise from the elevator. It also applies to apartments located on the first floors at home, where big human traffic.

In this case the ideal option will install the entrance door with elevated sound insulation characteristics. Typically, such doors are characterized by a more serious filling of the canvas and insulation of the box. As such materials can be used:

• mineral wool plate (compressed mineral wool);
• polyurethane foam (insecurity);
• mineral wool;
• combined filling (sharing of the above materials).

Also worth paying attention to the thickness of the door canvase and the exterior decoration. The more this indicator, the better. Additionally, protects against the penetration of noise into the room - the use of exterior decoration MDF panel, which can additionally extinguish sound oscillations.

Buy entrance doors with good noise insulation with installation in Moscow

The door master company offers not only high-quality products, but also service is the installation of doors in Moscow and the Moscow region, service and warranty service. After all, the soundproofing of the door depends not only from technical characteristics, but also from its correct installation. Our masters will produce all work qualitatively, quickly and without any problems. After installation, the package of documents is written out where the door and installation warranty is prescribed.

Trust the installation of the entrance door with noise insulation by professionals and secure calm and comfort in your apartment. Call!

Great noise insulation possess absolutely all models entrance doors Torex. This became possible due to the fact that the products are equipped with a unique multi-level system Sound protection. It is provided, on the one hand, the double circuit in the door perimeter and the box (one of the circuits is magnetic). On the other hand, sounds from the outside successfully extinguish due to multilayer noise insulating material. You will calmly feel behind the Torex doors at any time.

In most models of noise insulating inlet metal doors Torex, the box is filled with high density mineral slab. If necessary, when installing, the box is additionally insulated with mounting foam.

Depending on the type of door, the following insulating fillers are used in the door linen:

• The TM Professor doors use a three-level protection design. In addition to the mineral plate of high density (60 mm thick), a layer of isolon is a thickness of 3 mm and a layer of heat insulating plug. Such a combination of materials and their location relative to each other is optimal to maximize noise reduction and cold falling into your home from the outside. Cellon also performs pairottable functions. This is especially true for those who live in the first floors. In the cold season and in the rainy season, the boot-cutting capabilities of Izolon will reliably protect your apartment from the penetration of moisture and evaporation from the street. Also mineral plate Used in the Ultimatum series.
• Filling the door leaf with rigid foam polyurethane - patented technology that allowed to raise performance features Doors on more high level. This gives additional protection not only from noise and drafts, but also from the frozen design. When using a polyurethane, the door becomes more resistant to deformation, since the frozen material performs the functions of rigidity. This material Environmental. It does not highlight harmful substances and widely used for isolation refrigerated cameras. Torex Patented Bay Design provides unique heat and noise insulating properties of the Super Omega, Super Delta and Ultra-M series.
• In technical doors, high density mineral plate is used. IN fire doors A high-density basalt fiberboard is used, which can resist fire.

In order to isolate the room from foreign horsesIt is recommended to install interroom doors with good insulation and sew walls with special soundproofing panels.

Features

For the manufacture of interior doors The following materials can be applied:

• an array of wood;
• warm plates (Fiberboard);
• plastic;
• metal;
• glass;
• mirror.

The latter distribution was found from the massif and dvp, glass, plastic and metal used in the manufacture of sliding doors.

Door canvases of the following types:

• solid canvas;
• hollow cloth;
• canvas with filler;
• waters with glass inserts.

The soundproofing properties of the glass insert doors are noticeably worsen. The hollow canvas acts on the principle of the resonator, which also adversely affects the door's noise protection.

The highest sound insulation provides the door from the array. The lowest ability to suppress noise have doors made of glass, plastic and metal.

There are ready-made soundproofing doors.performed according to the "Sandwich" principle. They provide a high level of sound absorption up to 26 dB when installed in special boxes with thresholds, but do not always fit into the interior of the apartment.

It is easily available to perform sound insulation of the door in the apartment yourself.

Soundproofing of interroom doors do it yourself

Right installed door Capably reduce the noise level by 12 dB. The use of special materials for its plating will allow to achieve even greater noise reduction.

Activities for soundproofing doors include the following steps:

1. With the help of sealant thoroughly close the cracks between door box and wall.
2. Sew the door from the penetration of noise.

As a filler, you can use Sintepon, batting, foam rubber, mineral Wat. For the sheat will suit artificial leather, Dermatin and other materials.

3. Very easy to isolate the door with modern sound-absorbing plates. They must be pasted on the door back to each other with mastic, and then use any accessible decorative material as a finish.
4. Glue the perimeter seal. The gap between the door frame and the blade and should not exceed 1 cm. You can use a rubber profile hollow cord as a seal.
5. Install the thresholds to reduce the noise level from under the door.

Special thresholds are produced with sound-absorbing effect. You can use a door brush seal glued to the bottom of the door.

Sliding interroom doors areolation from noise much worse than swing doors. But when performing certain conditions, it is possible to achieve good results, it all depends on the design and method of installation.

There are two main types of sliding doors.:

• doors moving inside the wall (disappearing doors);
• doors moving along the wall.

Best sound-insulating properties Possess "disappearing doors." Doors moving along the wall have big gaps in order not to make their movement.

1. Reduce the gap between the door and the wall by replacing the plinth.
2. Reduce the gap between the ceiling and the door using special carriages.
3. Reduce the gap between the wall and the door of the door with special door brush seals. They are glued on the platbands and the bar hiding the track.

Exist ready sliding doors Made from "sandwich panels" that have a very high soundproofing coefficient up to 50 dB..

They are heavy, expensive and set, as a rule, in offices.

Application modern materials And technology allows you to quickly, easily and cheaply perform sound insulation of interroom doors with your own hands.

Given the demand for doors with high-quality sound insulation, today domestic manufacturers offer a whole set of solutions - these are violent doors from the organic wood massif.

Doors with a polymer seal or special folds, use as a filler voids of the cellular cardboard of the cellular cardboard, and for the doors with the PVC frame - the use of a two- or three-chamber glass unit that eliminates the free penetration of sound into the closed room.

Reviews of sound insulation doors in Zhevado store

Simichenko Anton Fedorovich:
Our house is big, there are always many grandchildren. Children are often noisy. And my wife and I want silence and peace. You have ordered sound insulation interior doors. I did not even expect that our room would really become quiet. I liked the design - calm and low, but at the same time original. I want to thank. Now if we order still doors, then you only have.

Inna tagged:
I searched for almost a month to parents soundproof interior doors. Dad rejected several options. And only your you liked. He said that he himself would not do better. It was even surprised when he heard such praise from his mouth. Coating, locks, knobs - we all liked everything. With delivery and installation, too, everything turned out very quickly. I will soon make repairs myself, I will not even look anywhere else in another place. Be sure to order again with you.