Ice slide ride - traditional Russian fun

For construction, we need: a couple of large shovels, a lot of water and a great mood. And also you cannot do in this business without frost, snow and several pairs of free hands.

Choosing a place for construction

First you need to determine the place for construction. It must necessarily be safe, that is, it is located away from plantings, buildings and other objects that you can crash into.

Determine the height, width and slope of the slide

The choice of height depends on the area where the slide is being built, taking into account the length of the slide. If you are building it for kids, the slope should not be steep, on the contrary, make it gentle. For adults, the optimal angle will be 40-50 degrees at the beginning of the mountain, and gradually decrease, making it more gentle.

We make steps and sides

Place the steps on the highest side of the mountain. Their width should be about 50 cm so that it is convenient to rise.

It will also be great if you make bumpers on the sides of the steps, 30 centimeters high. The same can be built along the edges of the slide itself, so that you can safely ride and not be afraid to fly out of it.

Sculpting a mountain

You need to start construction after waiting for a thaw. It is when the snow is sticky that you can easily make a hill of snow. After that, the embankment must be well tamped.

Fill in

It is imperative to fill the slide in frost. This can be done from a hose or buckets. And the most The best way- an ordinary watering can. After climbing the steps, pour gently and slowly, trimming the surface to create a perfectly even finish. You can fill the slide with a large shovel or plywood, pouring water onto their surface, from which it will drain onto the snow. You can do this by covering the mountain with a huge rag - thanks to this method, the water will more evenly cover the mountain. Another way: collect snow in some container, mix with a stick and evenly cover the mountain with this gruel. Where water holes have formed, fill them with snow and fill them again.

Finishing touch

After the slide is filled, leave it alone until the ice freezes. Then pour in the same way a few more times, leaving the ice to freeze. Do this until the ice is perfectly flat and leave the slide overnight. During this time, your structure should freeze even more and you can try to ride. But before that, do not forget to shake the steps with sand, and spill the hill again with water and let it stand for another hour. Another nuance - be sure to make sure that the transition between the descent and the ground is smooth.

Slide Rides

You can swim down the slide on bags, bags, cardboard or rubber mats. But all these devices are not safe, because when descending on them, you can get injured, as well as frostbite or squeeze your hands. For a faster, more comfortable, and most importantly safe descent from the ice slides, there are special equipment: ice cakes, tubing or cheesecakes.

The ice cube is a special device for sliding downhill made of plastic in the shape of a heart. Such a plate is very light and convenient to take with you for walks, and you can control it with a handle.

Tubing or cheesecake - an inflatable ring, similar to a life buoy, inside which an inflatable chamber, and outside a protective cover bright color... It also has handles for the child to hold on to.

Outcome

Ice slide riding is a well-known traditional pastime. Knowing all the nuances and rules, you can easily build such fun in your yard. A DIY ice slide can be the best gift beloved family for the New Year holidays.

Reading time ≈ 6 minutes

What a winter without snow slides, ice sculptures and snowdrifts! On a frosty winter day, I just want to take a piece of ice and run to ride on fresh air, but often there may not be an ice slide nearby. It is not surprising that many are interested in how with their own hands without outside help build a slide of snow. This is a real joy not only for kids of all ages, but also for adults. Consider several ways how to properly build and fill with water snow slide to freeze it.

Choosing a place in the yard

Let's first figure out what kind of slides exist in general, and what kind of snow structure you can build in your yard.

Types of slides:

The ideal place is game Zone where the kids used to spend their time. Here are some tips for where a children's slide should be:

• In a safe area away from the carriageway, as well as from footpaths;
• On the open area to ride freely and easily;
• Far from various buildings, structures, pillars, trees and other plantings. Sliding should be smooth until it comes to a complete stop;
• The slope should be gentle and not too steep (the optimal angle of the high part is 40-50 degrees);
• The rollout should be directed to a level area, without obstacles and protrusions, so that children do not get injured;
• The place should be well lit in evening time, since riding with flashlights is not only inconvenient, but also unsafe.

Photo example of a merry New Year's slide

Choosing the size and preparing the inventory

It is important to remember that the higher you plan to build a snow slide, the more free area should be for a smooth descent. Consider the basic requirements for their manufacture:

1. The top of the slide should be fenced with bumpers at least 40 centimeters high. This is for protection from accidental drops and stability if the outsole slips;
2. The stairs to the top should be non-slip and not steep (the dimensions of the steps in depth and height are 20 * 20 cm). It will be useful to sprinkle the steps with sand, but not too much, since it will fall on the slope and slow down the movement;
3. The ratio of the height of the slide to the length of the entire descent should be in the proportions of 1: 6;
4. The width of the slide depends on the intended purpose: for small children, for tubing, for riding alone or together in a crowd, etc.

The most best time for the construction of the structure - a clear sunny day, since a slight thaw is observed during the day, and the frost grows stronger at night. It is easier to work with slightly damp and pliable snow, and at night the result will fix by itself.

What tools are needed:

• Warm mittens and gloves to protect hands (it is advisable to wear rubber gloves upstairs);
• Large metal shovels;
• Broom;
• Metal buckets, ladles and watering cans;
• Sprayers, spray guns, or rubber hoses;
• Unnecessary rags and mops;
• Flat solid fixtures (table tops, long plywood, boards, etc.) for leveling snow on the descent;
• Wide trowel or construction scraper;
• Quick access to water.

Remember: only pure snow should be used to form the structure! It should also be free of foreign objects: stones, sticks, branches, leaves, etc.

The video below shows how you can build a slide of snow with your own hands in kindergarten or the yard of your house.

We begin to sculpt a slide of snow

Once you have decided on the location and dimensions of the structure, prepared all the equipment and called in assistants, you can safely start working:

If desired, you can use a ready-made frame, for example, wooden stairs, railings, boards, boards, countertops and even car tires, which are subsequently covered with snow.

Let's start filling

Filling is the most crucial stage, here it is important not to spoil all the work done. The main thing is never to use warm water to fill the slide - it will only leave holes in the snow and melt it. The water should be ice cold - mixed with snow in a metal bucket.

Fill options:

1. Spraying out garden watering can or hose;
2. Pouring water onto a wide shovel and then onto the mountain slope itself;
3. Laying a wet rag on the surface of the ramp;
4. Pouring ice water from a bucket of snow onto a hill, tamping and grinding with spatulas.

All hills, irregularities and defects are knocked down and leveled until the structure takes the required shape. During the night, the form should "grab", and the next day you can try the slide and ride with your friends!

Downhill sledging, skiing and ice skating, building castles from the snow - these are not all the fun that winter gives a child. If parents want to give their own child real pleasure from then they definitely need to learn how to make a snow slide in the courtyard of the house.

Snow slide: making a winter attraction

To build a snow slide, you will need just a little ingenuity, a free flight of imagination and a couple of improvised tools that are sure to be found in every home.

Tools:

• metal or plastic shovel;
• scraper, construction trowel;
• spray;
• buckets and watering cans.

Usually, for the construction of a full-fledged snow slide, a small shovel is enough, which will help form the basis of the future structure, as well as several spatulas for leveling surfaces. A metal or plastic bucket and a pair of warm gloves will come in handy. However, depending on the complexity of the work, conditions and circumstances, you can use any other convenient one of your own free will.

Engineering sophistication and security

Figuring out how to make a slide out of snow is not at all difficult. However, before starting work, it is necessary to pay attention to some "secrets of engineering" that will help make the structure stronger, safer and more durable.

1. First, you need to find the optimal location to place your homemade attraction. Naturally, the longer the slope, the more fun it will be to ride.
2. In order to avoid problems with pouring and freezing water, it is better to make the slope of the slide more gentle.
3. To protect children from injury, it is imperative to equip the roll-out onto a flat area, the plane of which will ensure uniform sliding until it comes to a complete stop.

How to make a slide out of snow: construction technology

Before proceeding with specific actions, you need to protect yourself from frostbite by protecting your hands tightly and, if necessary, wearing warm gloves over it.

Optimal conditions for the construction of a snow slide come with the arrival of a thaw. As soon as the temperature approaches zero as much as possible, and the snow becomes more tenacious, it is necessary to roll up large balls, laying out the base of the future structure from them, according to the planned parameters and dimensions.

How to build a snow slide that will be comfortable and safe for your child? To do this, you need to take care of the preparation of the ladder, which will help to climb the hill without any problems. You can make an impromptu ladder from all the same snowballs laid in the form of steps. The smooth surface of the steps is easily formed with a spatula or scraper.

It is better to fill the snow slide with the arrival of severe frosts. Moreover, this must be done by evenly watering the surface of the slide. warm water from a watering can. In this case, small depressions may appear, which will have to be lightly patched up with snow and smoothed with a spatula.

Parents who know how to make a children's ice slide the right way never build one without curbs. This allows you to increase the safety of the structure and leave the kids alone with entertainment, without fear for their health.

Secrets of creating a track

After reviewing the basic recommendations on how to make a slide out of snow, you can proceed to study the technology for creating an ice path. First, you need to carefully tamp the snowballs, forming a smooth, dense surface of the future descent. You can compact the surface with your feet, a shovel, a small log, or any other means at hand.

The angle of descent should be done based on the age of the kids. For children under 3 years of age, the angle of the inclined path should be no more than 30 °. Parents who want to learn how to make a slide of snow for older children should be advised to make the descent steeper, otherwise the entertainment can quickly get bored with children.

Preparing the base ice layer

The first layer of ice is the most important start when building a snow slide. His correct formation becomes the key to creating ergonomically thought-out descents, verified inclines and turns.

It is convenient to create a basic ice layer using a conventional home sprayer for spraying plants. The water in the spray bottle must be warm. Otherwise, the descent will freeze too quickly, leading to the formation of uneven areas. The first layer of the ice crust should freeze for at least an hour.

How to make a slide of snow with your own hands? Filling with water

It is convenient to pour the main layer of water to form a full-fledged ice descent using a small bucket, or better ordinary Water in the container should be, again, warm, this will make the surface of the descent smoother. However, you need to try not to overdo it, because when filling the slide, you can frankly put all your efforts down the drain.

In order for the surface of the descent to finally grab onto a solid ice crust, do not allow children to descend until the next morning. For the final fixing of the surface, it is necessary to splash several buckets of water onto the slope of the structure in the early morning.

Eventually

How to make a slide of snow for a child? When performing such a task, the main thing is to have a reserve of strength and time sufficient to form a full-fledged snow mountain.

In order not to fly off the hill, the descent is best done in the form of a groove with strong, high curbs. Similar to the descent, the surface of the curbs must be evenly doused with water from a watering can, bucket or hose.

Having figured out how to build a slide from snow, you will probably want to make such a structure in the yard. If you also involve others in this process - parents and children, then you can turn the construction of a slide into a rather exciting event. As soon as the slide is finished, you can safely call the neighboring children from all over the area, who will gladly test the strength of the structure.

Usually filling a small snow slide on their own, even without outside help, is not difficult. Depending on the number of participants in the event, work can take from several hours to several days. However, the work spent will not go unnoticed. Until spring, children will be able to have fun and spend time in the company of their peers, without leaving their own yard.

Learn how you can make a slide of snow yourself in winter, how to properly fill it with water to freeze.

Agree that on New Year's holidays one of the best, memorable childhood memories is winter festivities. Making a snowman, sledding, skiing, and, of course, on the slides is a great activity. The latter will be discussed in this article.

You will learn how to build a slide without difficulties at home, without any outside help. This slide will bring great joy to your kids and even adults, and so that the work is not so boring, you can involve the whole family in it.

How to make a slide for children out of snow with your own hands?

It often happens that some problems occur during the construction of the slide. It collapses, disintegrates, pits and irregularities appear in the most inappropriate place. Next, you will learn how to make the slide correctly. So that it is durable, reliable, and most importantly - comfortable.

Materials for the construction of the slide

To build successfully, you need the following:

1. Frost outside the window
2. Plenty of clean snow
3. Shovel
4. Broom
5. A decent amount of water
6. Watering can, bucket
7. Positive attitude
8. Scraper or trowel

An example of building a slide for collective use

To make a slide, you must follow a few simple rules:

Safety. Choose a safe location for the future structure. This is necessary so that your child does not get hurt during the descent, so that there is no tree, fence, road, bushes and other obstacles on the way. You should not create an object of entertainment under the roofs of old houses, from which an icicle, slate, brick, etc. can fall.

Slide height, tilt angle. Determine the height of the future slide based on the age of the children. For very young children, somewhere up to three years old, a slide of one meter in height is enough. For older children, the most optimal, safe height is two to four meters. You should also adhere to the correct angle of inclination, such that it is no more than forty degrees.

Pure snow. When erecting a slide, you need to use clean material... Since your child can smear things. Try to prevent children from getting hurt. The problem arises if there is debris, branches, sticks, etc. in the snow.

The procedure for creating an ice slide:

• After the location, size is determined, we get to work. Using shovels, you need to sketch the right amount snow. For example, a meter-long slide can be built in about thirty minutes. It is advisable to make the foundation of your snow slide using rolled large balls of snow. Thus, you will already have the base of the slide.
• Next, we proceed to the formation of our slide. Using a spatula, broom, we give it the desired shape... We make the optimal angle of inclination of the slide, straighten the area of ​​descent of the snow slide.

The base of the formed snow slide

• If the slide is high, make steps with a spatula (scraper), shovel. For strength, strengthen the steps with your feet so that the snow settles, and only then form with an auxiliary tool. They should be comfortable, small, so that children can easily climb up.

An example of making snow steps

IMPORTANT: Acceptable step width - at least twenty-nine centimeters.

Don't forget about the bumpers. Their height should be approximately ten to thirty centimeters, depending on the age of the child. The boards can be made with a shovel. Also, in order to give them shape, you need to use manual work... Do not forget to wear gloves during it, as protection from the cold.

If there is a desire, time, then add decor. Decorate the slide with snowmen, various figures, paint it with patterns. Or do everything to your liking, much depends on your imagination.

How to properly fill a slide of snow with water?

We have come to the most difficult final stage - to fill the ice slide with water. The descent of the slide must be poured in several stages - at least three times. In this case, use cool water, using a spray bottle, watering can, ladle.

What should be done to ensure that the descent on the slide is uniform?

You will need a broom, with its help you spray an even layer of water over the entire surface of the structure. Make sure that there are no irregularities, holes, bumps. To do this, during pouring, it is necessary to slap the seized thin, fragile layer of ice with a broom. After the second step, you have a rough crust of ice. For a more reliable result, fill the slide a third time, after which you will get a strong, smooth, and most importantly - reliable structure.

IMPORTANT: Fill finished structure stands at low temperatures, from 10 degrees below zero. Otherwise, your efforts will be completely useless.

If you follow the entire sequence of work, you will receive an excellent snow slide, which your children will be very happy with. If the winter turns out to be frosty, then the subject of entertainment will stand until the spring thaw.

Video: DIY snow slide

And the ice slide is quite difficult, you must agree. Forecasts of weather forecasters promise us both frost and snow in the near future, so why not take advantage of the situation: let's get down to construction winter slide for children in the country!

By the way, this building will bring great joy not only to children, but also to adults - tested on personal experience... Moreover, in order to make it, a lot of strength and special skills are not needed :) Let's go?

What is needed to build a winter slide

For successful construction we need:

• frost on the street;
• a lot of snow;
• a pair (or better - several pairs) of free hands;
• several large shovels;
• a lot of water;
• good mood:)))

Where to build a slide

The first thing to do is to determine the place for the future slide. First of all, it must be safe, that is, be at the maximum distance from the roadway, sewer hatches, various drains, water bodies, trees, thickets of thorny bushes and other traumatic objects.

Long descent of the ice slide. User photo

Further: there should be enough room around the slide so that you can freely walk in and out of it. Moreover, the higher the slide, the better the ice on it, the more free space will be required to ride without fear.

Height and length of the slide

At the chosen place, we make a large snow mountain, for which we will have to throw with prepared shovels as much as possible more snow... So the height and width of the future slide largely depends on your strength)) The higher it is, the better - within reasonable limits, of course. But if the slide is being built for kids, do not get carried away too much: in this case, it is worth proceeding from the safety of children and your own convenience.

As for the length of the descent: lovers of this primordially Russian winter fun are advised to make a slide at least 5 m long, maybe more ... But again, if you are making a slide for small children, you should not build it too long.

Choosing the shape of the slide

You should not get hung up on the slide of the classic form we are accustomed to. You can do it with turns in different directions, like on a bobsleigh track, or with an arch. And you can also try your hand at creating, and build not just a slide, but a fairy-tale character or a fantastic figure :)

The angle of inclination is also important: it is optimal at the beginning of the hill - 30-50 °, and then it should be gradually reduced, that is, the descent should be made more gentle. Well, for the smallest, it is better to equip a gentle slope from the very beginning.

Do you need steps?

Of course, if you are making a slide for small children, you can do without steps, but if for children who are 5+ (now I mean adults :), then the steps must be done. The answer to the question of exactly where to place them is unequivocal: from the highest side of the slide.

Try to make them in such a way that it is equally convenient for a child with a 36 foot size and an adult with a 46 to climb on them. Optimal width steps - 40-50 cm, it is not worth making them wider.

Do not forget about the sides on the sides of the steps; their height should be about 30 cm. By the way, small sides can be made along the edges of the slide, so as not to fly out of it during skiing.

Fill in!

Armed with buckets of cold water or with a hose, climb the steps up the hill, and begin to water it - slowly, very carefully so as not to damage the structure. While pouring, we constantly trim the surface of the slide - this is the only way we can achieve a perfectly even coating. Places in which holes have formed from the water, densely fill with snow, and water again with water.

After completing the work, we leave the slide alone for a while - until the ice freezes. Then we water the slope with cold water several times in a row, and each time the layer of ice must freeze. You need to fill the slide until it becomes perfectly flat. After that, it is best to leave it to harden well overnight.

Let's go for a drive!

By the morning the slide should be ready (after all, there is more frost at night), you can ride :) However, before going down the slide, sprinkle the steps thoroughly with sand, and pour a bucket of water over the slide itself. Let it stand for another hour and go!

You will find a large selection of various sledges in our catalog of goods for summer cottages and out-of-town rest, which includes offers from large garden online stores. :

Sled vyatskie sled vyatskie-1sh kpb-sledge-1sh 594 rbl WATCH
All instruments are new

Folding sledge "Flyer", from 6 years old, up to 80kg (Joy Automatic), JSXQ-03 1,000 rubles WATCH
The Gardener's Empire

By the way, you can ride down the ice slide not only on sleds, but also simply in warm clothes, on cardboard, on special rubber mats and on ice floes.

And you can pick up ice cream in our catalog, which contains the offers of many large online stores.