Decorate the country area or just the courtyard near the house can be ordinary old wheels, and the many masters of needlework do it with their own hands doing real masterpieces! Indeed, in our country, the processing of used tires is not on the highest levelAnd we can observe many thrown straight on the street tires. But it is possible to combine pleasant with helpful and create crafts - decorations for the country area, garden, gardening with their own hands. Let's see a selection of photo crafts from a tire:

Use tires in the garden

With the help of paint and fantasy, you can create your own and real work of art. Flower execution options can be a lot, Master - classes, we will look at the following articles, and now let's look at the South Exotic - Palm:

Tire palm trees with her own hands

Crafts on the topic of southern holidays are very popular with us, we have already published an article in which its manufacture was described in detail. Besides exotic plants You can create African predators:

Crocodiles made of tires

Decorate your garden crocodiles from auto bus

Such animals can not only cause admiration, but also to scare unwanted guests ... really made very beautiful and believable.

Elephant Is old tire and cameras in the garden

Colorful blue elephant, all from the same southern African countries, very well look at the playground. Here is another couple of examples of these wonderful inhabitants of Africa:

Making the right coloring of the tire, you can create your own zoo from a variety of animals from around the world. And for this you need only: a desire, several auto strokes and a little imagination. Here, at home, the bus turned into a snail and black and white zebra:

Snails and zebra: crafts from tires for garden and garden

To decorate the garden, you can come up with bizarre birds, here for example, the parrot can be a good dwelling for flowers:

Parrot and Swans: homemade from the old tire

For lovers of birds, you can make such funny crafts:

Birds - crafts from tires for the country garden

Homemade birds turned out to be very wonderful, they even look so impressive!

Turtles from tires

"Auto" turtle from spent car tire

Turtles of automotive tire

How to count a cup of good tea ?? Make a "tea set" can be for the decoration of a flower garden, such a cup will be difficult to take in your hands, but it looks great!

Crafts from tires for the courtyard

For a full-fledged tea set to these cups you need a good garden furniture, this is just suitable tire samples:

Old tire as furniture

The furniture was really original, it is true to withstand the weight of a person by itself she will not be able, so the frame must be made from a metal structure.

Decoration of the playground using a tire

Fabulous animals can decorate both their playground and territory near the house. Go past them without a smile - few can, and children such figures will be interested in most.

Funny horses

Horses made of auto tires

These assistants in the garden will help to carry something, or simply carry the bus trolleys - a flower garden.

Garden crafts

basket - Flower Garden

Well, and at the end of our photo - a selection Let's see the video in which also uses the tires for needlework and which will be a good addition:

Tire crafts with their own hands

That's all, we hope you liked the photo selection of crafts from tires and tires do it yourself, See you on our pages!

The use of automotive tires in the country is also justified as the use plastic bottles. It's cheap and pretty practical material To create a wide variety of items and things that may be needed for labor, recreation and even the design of the country's landscape.

More recently, we talked about crafts at the cottage from the remedies, created tops of the most interesting things and determined the rating and exclusive ideas of the use of old and worked things to create something new. We used wood, metal, plastic and glass bottlesbut today it came to pay attention to at least interesting material - car tires. It is not easy to get the tires for use in the country, and it's not difficult to work with them. Therefore, we propose to pay a little time and explore new ideas. Also, you immediately ask you to actively participate in the discussion of the article, because the opinion of each reader is very important for us!

Soft baffies

For comfortable seats at the cottage during the rest, you can use automotive tires. To do this, they turn into tissue tapes or straps, which are simply intertwined with each other. There is nothing complicated in such a technique, and we have established a practical method that it takes a literal hour of time.

You can use the tires of almost any diameter and size for the production of "country furniture", but try to choose not the most dilapidated so that the reinforcing fibers from the main material have taken you trouble in the form of scratches and cuts.

Donkey with a wagon from tires

Remember, not so long ago, we studied in detail the original works of some dachensons - wooden horses in the country? They were made of timber, logs, branches and other materials that can not be bought, but just found in the country. Today, we suggest considering the model of the horses in the new light. It will not be a horse, but a donkey from the car tire.

On the production of such a creature takes only two auto strokes, which just occupy a place in the garage or shed. By applying a sharp knife, a little knitting wire and fantasy, you can build a pretty jewelry for the lawn in the country during several hours. In addition, it is quite realistic to create not only a small donkey, but also a wagon, but in it, for example, install flower pots, thereby creating a mobile flower bed.

Parrots from auto strokes

Starting a conversation about exotic birds, we immediately imagine the image of a similar masterpiece.

In view of the present art, the hand to which the professional attached. But if you look at, then there are no difficulties in the production of such birds. If you systematize work, make a simple drawing and take a high-quality instrument in the hands, you will only follow our instructions:

• Make a slice tire on both sides, leaving only a small strip of the inner circle. That is, you get a solid small radius of the product, but a large divide in half;
• Next, spend a cut along a small radius, on both sides, due to which you get the desired shape from which you can conduct decorative work;
• At the edges of the cut, you should make the head of the parrot and its tail. We dissolve the source material for several bands and focus them at the end, and also cut out of the rubber, the likeness of the parrot head, only in shape;
• The rest makes bright colors, with which a piece of black rubber acquires the desired shade and explicitly the image of a beautiful bird.

Tsarevna-frog from wheels in the country

Are there a few old tires? Then on the territory of the cottage you can create a very pleasant and cheerful picture - a frog sitting on the edge.

The whole process takes several hours, in terms of costs - you only acquire paint for design.

Initially, laying two tires on the ground, a friend near a friend, closely. The third one is stacked on top of them, so we get a garden figure, something resembling a pedestal.

We feed the tires of the earth from the inside and go to the design:

• Two shorter and thick branches and two long, but more subtle, form paws frogs;
• Special forms wooden bars, cut which can be equipped with a knife, complement the paws;
• From plastic bottles, we cut our eyes and the crown for our cute "princess", the rest is just trying to the paint.

Tire crafts with their own hands (video)

Flowers from auto stakes

Some time ago, when we talked about interesting ideas for giving, we stayed on creating flower beds from tires. Today we have only a reminder, as well as the call to use not only the rubber part, but also metal rims from the wheels, on the basis of which you can build reliable and durable coasters for the flower.

Figures of birds

Decoration for gardens and lawns can also be made of old tires. Today we have a pretty cute white goose, on the production of only one car tire was spent.

As you can see, it is put on the side and circumcised, its main part forms it decorative decoration Slices, and cut part forms the neck and the head of the bird.

From alone, rubber is very difficult to make your head, and therefore the tree is used for stability and shape.

After forming an image, painting a new garden figure.

It is also noteworthy that as a result we get not just a garden figure, but also an excellent flowerub for planting decorative plants.

Pool of old tire

Of course, in order to make even the most small poolIt will be necessary to take a serious size tire, for example, from the tractor or a large loader, and so on.

Work with dense material is difficult, but it will not be necessary to produce cutting and it will be necessary, because we ready formwhich can be filled with water. It remains only to make a reliable bottom so that when filling such a pool, the water immediately did not leave.

Initially, you should select a place to be installed, it is made with a dense material that will create a base. It can be an explorer or clay, but maybe the usual lawn land with grass, the main thing that it be established.

Now we settle on the installation site a piece of awning or a special film that is used for the device artificial reservoirs at dachas. Around the perimeter of our wheel degrease the awning and grease abundantly special glue. It can be glue for rubber or even universal "velcro".

The tent is stacked the wheel, the awning presses its weight, and in this position it remains for a day. After that, you should additionally treat glued seam with sealant from the inside and outside. Through one more day, you can pour water inward and use a fully sealed tire from the special equipment in the form of a dacha pool.

Track in the country

If there is a small bias on the territory of the cottage, the descent to water or transition through the ravine, use to ensure maximum comfort on the path of movement you can tires. With their help, durable and durable steps are created for which it is convenient and safe.

Original Garden Figures

Some options we have already studied, but now we go to real fabulous characters that may appear on any dacha.

First of all, we present bears from automotive tires, which are organically formed and installed, are decorated and endowed with a special way. As you can see, next to them and pretty flowers from plastic bottles, which we spoke recently.

In turn of the caterpillar, the easiest of which is really not. This is a pretty figure of vertically installed tires that fit tightly to each other. different height. Painting and simple design helps to complete the image.

At the very beginning of the article, we mentioned wooden horses and showed you a donkey from the auto strokes, but now we have come to a horse from the old tire, to the structure of which and complete decoration you will have no more than a couple of hours. Agree, it's not so much to create a favorite summer toy for children or grandchildren. A shape is formed very simply - a tire is installed in a small hole, which is concreted. Next, it is drawn up and tinted, complemented by head and mane, and immediately after that it becomes a pretty object in the exterior of the cottage.

Furniture from auto stoves

Oddly enough, but auto strokes can play a role not only original jewelry For the landscape of the country area, but become both practical furniture. One of these examples, we have already considered at the beginning of the article, but here we were still somewhat very good ideas.

Your attention is presented with a good country kit, for the production of tires and metal carcass. But as you could notice, it is not simple, but wicker furniture, but therefore an interest in it is increased.

A similar kit and just below, but it is already soft furniture For giving. Naturally, not the most practical option And far from the limit of dreams, but very pretty!

Using tires in practical purposes

In conclusion, we present you the idea of \u200b\u200bthe device. village pit, homemade septica or special pit for cottage toilet From old tires. In details to tell about the construction of a toilet or cesspool, we will not become, since the site already has thematic material, and simply imagine another useful direction in which you can use tires from cars.

What can be made of automotive tires (video)

Human fantasy has no boundaries, and the desire to achieve a maximum in practicality on cottage plotoften is the main goal. That is what we consider the reason for the development of new opportunities and the implementation of even those ideas that initially seem not very pathways. Today we have introduced you a considerable list of decor, furniture, and even sewage elements from old auto strokes, and therefore we are waiting for your reaction to the material just below, in the comments.

Crafts for giving from automotive tires (20 photos)

Reviews and comments

(4 estimates, average: 3,62 out of 5)

Lydia 20.03.2014

Yes, of course ... but all car tires and cameras do not dispose of it. Tires should go into recycling. First on the furnace fuel, and then on gasoline or solar and cord. In the cooking of furnace fuel on gasoline can help.

Sasha 04.10.2014

By the way, he saw a bunch of tire fakes on other dachas, but he never thought to do this, because it was lazy, and I didn't want to do something, but now I will make myself a couple of curious fakes in order to decorate a little country house)

Igor 07.12.2014

Flight of fantasy, of course, pleased. And yet, the attitude to such use of the tires is cool - this kind of aesthetics is still doubtful. It is interesting only in cases of completely unexpected and original that the species that applications.

Dmitry Belokonovon 21.09.2015

Very original, a lot of things learned for myself, I liked the idea with the aspirations, not only nice, but also functionally, better than carry chairs from home, or put an old shop. And the steps of the tires are also interesting, just there is a descent to the garage, and you have to bypass him behind the courtyard (it is very sharp), now I'm thinking about itching the descent to the tires so that the time saves and do not make a huge hook!

Alla 03.10.2015

On these photos, the shapes of the tire look interesting. I saw several similar figures from the neighbors, and I didn't like them very much: somehow it looks. But the idea of \u200b\u200bsteps from tires interesting and functional. We can do the descent to the river to do so. True, I do not know where so many tires take.

Elena 10/14/2015

And in our city, such decorations on the courts in kindergartens are implemented! Heroes of cartoons: Krosh, Nyusha, Cheburashka, Masha and Bear! And the kids really like, and my reg.
During my childhood, in kindergartens, old tires only under the flower beds were used or burned to a barrel half into the ground, such as a sports projectile such. (((Is it really not enough for more fantasies? Because no supernatural materials are required for such crafts?
At the cottages, we have not met this yet. I think people do not want such structures to put, because at 5 - 6 hundreds of land under the planting barely enough. Alexander 11/27/2016

I always liked to make crafts with your own hands. The garage, I have fully equipped for one goal - make crafts. Some time ago, I began to notice how I was in the city, I begin to put such crafts on the flower beds, in kindergartens and other cultural places. I liked this idea and I started doing myself of different kind Crafts from tires, etc. I think now, I will make black swans made of tires. When everything is ready, I will unsubscribe what happened.

Karrina 01/16/2017

But please tell me what better paint use for such "folk creativity"?) To do not flow and the smell did not have a sharp, there is a lot of options to choose from now, I would like to do not get enough sleep for a month, I will not make anything about it, but from the old father's car, tires remained , children want to experiment) I want not to stickily in respirators and cost without consequences ...

Vova 02/14/2017

Class! We are waiting for the continuation of the digest of products from the tires!

Masha 03/22/2017

Here are these swans of their tires, we made four pieces and put in the garden. It turned out very pretty, and the process itself is simple. Only with the wings we did not bother, it turned out Belubee. And the photo simply conquered parrots, but it is very thin work And in terms of cutting from rubber and in terms of painting. Our husband with her husband crazy handles so far is not capable of)

Masha 15.08.2017

I have never seen crafts that really beautifully look at the country area, as it is so better to put more colors for me or let a smooth lawn be, than to litter a plot.

Add a comment

Swans long chosen not only ponds and lakes, increasingly they meet on panstones. On green lawns you can see whole swan flocks made of tires automotive tires. Designers called this direction TRESH-ART (from English. TRASH-ART) - the art in which the old trash is involved.

The name is new, but the idea of \u200b\u200bcreating beauty from waste has appeared long ago. Uncommon miracle birds decorated not one courtyard or garden. If you like such art, we suggest to get acquainted with the technology of making swans in detail.

How to make a swan from a car tire

Beauty on the plot can be made of girlfriend, but it is necessary to understand that it is a work, and not a pellement. In order for the Garden in the garden, the wonder-swans from the tires will be needed:

• Old tires;
• Electric jigsaw or grinding machine (Bulgarian);
• Electric drill;
• Nippers, passage;
• Chalk for marking;
• Metal rod;
• Paint.

What tires to choose

For swans are old, well-carted tires from passenger cars. Moreover, rubber should be the most worn out, erased to the limit. Such tires are called lys. The worse the material looks like, the easier it is to work with it. Do not take studded rubber, especially imported production.

If you can choose, it is better to take rubber with a kapron cord. Such material can be cut just a knife. Tires with metal cord are more difficult in processing, in this case, without special tools can not do.

As an option, in search suitable materials You can contact the nearest tireage. Usually, in such places, unnecessary tires give pleasure. For one swan you need one tire. If you wish to experiment with the form of birds - take a few. Before starting work, rubber needs to be washed and dried. All work is better to spend outdoors.

Marking of the circuit on a tire and cutting

The appearance of the swan depends on the markup scheme. During the operation, the tire will need to turn. The complexity of this process will depend on how you make cuts.

On how to make a birdhouse with their own hands, told.

Step-by-step instruction for the manufacture of swan do it yourself

Tire marking, for the manufacture of garden swan.

With the help of chalk, it is necessary to share the bus in half. Then outlined the beak, head and neck. The length of the neck together with the beak should be greater than half the length of the circumference of the tire. The wheel R13 is a circle length of 180 cm, respectively, for the neck you need to measure about 95 cm. For a proportional head, 10 cm is needed, the beak length is 9 cm.

Step-by-step instruction:

• The tire must be cut according to the outlined lines. A knife can cope with the tires of an old sample with a kapron cord. In order to facilitate work, prepare soap mortar And from time to time dip in it a cutting subject.
• Metalokord knife will not succumb to. You can use grinding machine. It is necessary to work solely outdoors, and do not forget about closed shoes and work gloves.
• Note that the operation with rubber increases the flow of circles. It will take about 3 disks per swan. In addition, the ragged rubber spreads not the best smell around, nothing and soot are provided to you. Bulgarian cuts quickly, but not eco.
• Lobzik work more pleasant. For the plant, the sawdill needs to make a hole. You can use chisel or drill. Lobzik's pylon wear increases from high speed. Optimal option - Work on the turns below average using a reverse tooth millet. So you can repeat the metal cord without any problems: the reverse move of the peel will simply break it, and a small speed will not give the tires to heat.
• For adherents hand tool It will be suitable for the mill. It will also cope with the metal cord, but the speed will be lower. What the tracks from the plugs from plastic bottles are outlined.
• You need to cut the bus along the contour of the neck and head, the transverse cuts are not needed. As for the sequence, it is a gross mistake that newbies allow, there will be a complete sawing of one side of the neck. If you cut the bus on one side, the second cut will be quite difficult.

• The next step is the tail. His length is about 25 cm. It will become an additional decorative element and makes it easier to turn the tire. Cut it similarly.
• The workpiece must be turned out. The process is time-consuming and looks like: the workpiece is molded by a cut part down, it is pressed by foot and pull, turning the side parts up. The central part needs to be sold.
• Now the design really resembles a swan. Side half rings need to lower down. If you took a tire tire with a metalocard, then the edges need to be treated with a grinder. But even such a procedure will not be able to fully smooth out the protruding reinforcement. Therefore, swans made of tires with a metal coordinate only for the decor, but not for playgrounds. Touching cutting with protruding wire is unsafe for adults, what to talk about children. More details about crafts from tires for the playground, learn.
• In order to give the swan the desired shape, you should strengthen the neck. For fasteners, you need to drill two holes over the entire length of the neck every 15 - 20 cm. They need to be located along the axial line. In the holes insert brackets made of thin soft wire. Brackets need to fasten the thick steel wire. It will take it about 1.50 m. The bottom end is fixed with inner Neck, at the base of the tire, upper - at the head level.
• The swan is almost ready, you just need to bring it the neck and make your eyes from rubber. They can be screwed with screws. The edges of the wings are caught for the decor, then the jar resemble the bird's fool. If you wish to have a princess-swan in the garden - make a crown from a plastic bottle.

Tire sculptures

In order for the birds to look uncomply and aesthetically need to be painted correctly. For swans usually choose white or black color. Silvery and golden sculptures look good. It is suitable for any stable paint for external work.

Rubber is well painted with oil, enamel and nitrocrasses. Do not forget that any paint is applied to a clean dry surface. Properly applied paint to bed well on the sculpture is not deformed and keeps quite a long time. Aerosols of automotive paint are suitable. Then work will go quickly. Smoothly painted surface can be decorated with acrylic paints. Draw your head, beak, plumage. Such swans look more naturalistic.

Car owners know the price of auto strokes. How sorry to throw them after they worked out their last time. Previously, another 20-30 years ago, the school courts could see old auto strokes, which were used to arrange the flowsm and physical education. If you show fantasy, you can independently make a lot of interesting crafts from the tires.

In the 80-90s of the last century in the countryside, the children rode a swing made of old car tires. And this is not the only thing that can be built from this material. Crafts from car tires to do is very simple, the main thing, armed with patience, required tools and sufficient material.

Tire crafts for garden

The country area is the place where any dreams can be implemented in the reality and make crafts from the tires with their own hands. In order to make a figurine from the old bus, you must select a suitable place, decide on the task, prepare the tool and start working. On the creation of a simple craft, you can spend from 3 to 5 hours of free time, but for more complex structures you will have to take a few days.

What materials and tools will need:

• acute durable knife;
• hoven for metal;
• electric jigsaw;
• metal ruler;
• rope;
• painting brush;
• paints of different shades;
• durable wire;
• bolts;
• auto strokes.

It is easier to work with imported tires - they are not so thick, easy to cut and well bent. When choosing a tire should pay attention to the type of tires - the winter tire will turn outward much easier than the summer.

From the tires you can make a lot of useful items. For example, it will be good to look at the garden in the garden of the tires, separating the plot or separating it into several zones: working, for games and rest. You can diversify landscape design Beautiful elements or facing the table and chairs from the car.

Look this image, make it yourself such a kit will not be a lot of work. The only thing you need to follow is not to put such furniture in the room, because even the old car tire will highlight nasty smell rubber. But for gatherings outdoors - such furniture is just useful:

You can still decorate the garden plot interesting crafts: make from auto strokes Capacity for growing curly plants, Install small pots or adapt rubber buckets.

Look at this image - this composition will decorate any garden and save place:

How to make a flower garden from a tire

The budget version of the creation of flower beds from auto strokes can be found in almost any yard. Automotive tires are built in the design (ring, fence, wave) and paint with multi-colored paints. There are many options for creating flower beds from auto strokes. The technology is simple: tires are drunk half into the ground, and the middle falls asleep the earth and sow flowering plants.

Complex structures, for example, an elevation-flower bed, can be done like this:

1. It is necessary to prepare automotive tires different diameter. Large tires will be used as flower beds, and small to serve as a hedge.
2. Discover tires to the ground, and small set up vertically.
3. So that small tires do not fall, they need to make a transverse incision and "plant" from two sides into large tires. From the bottom so that the design is stronger, you can be made of rubber with wire or metal brackets.
4. There should be a chain of tires.

Beautifully look at small islands-flower beds from tires in the form of tulips. To create such a flower bags, it is necessary to prepare 1 car tire with a disc.

How to make a club tulip:

1. Return 1 cm disc and appline with chalk (it will be petals).
2. Cut the tire around the wheel perimeter (without removing from the disk) along the contour.
3. Disconnect the parts and remove the bus - you will have a bowl at the stop.
4. To give beautiful view Flowerbe, paint the tire with multi-colored paints and draw patterns.
5. After complete drying, the flower bed will be ready.

It is enough to make a flower bed in the form of a swan. To create a figure, you will need 1 automotive tire. Look at the scheme to understand how to cut the bus and make a swan neck:

The finished figure must be painted with white paint. After drying the paint in the middle of the flower, the land is poured and plants plant.

Another option to create a decorative figure of automotive tires. To work it is better to use old "bald" car tires and a sharp knife. Take advantage of this scheme to apply a chalk line for which it will be more convenient to cut the shape.

Step-by-step creation of swan figurines:

1. Along the lines, cut out a sharp knife or electrolovka wings of the swan.
2. Since this part of the work is done very difficult, it is necessary to prepare a sharp knife with a wide blade in advance.
3. To make it easier to cut rubber, during operation you need to make it in the soap solution.
4. Turn the tire. In the swan body and in the neck of the neck with a screwdriver or manual drill We make small holes to gripe the wire with each other.
5. Apply the form form, cut your eyes and beak. Attach parts with screws.
6. Swan paint B. white color, Eyes leave black, and the beak paint red.

How to make a craft from the tires - Watch the video:

Make 2 tire figures and install them near a miniature pond, which can also be created from an old automotive tire.

To make an independently small reservoir, prepare such tools and materials:

• wider tire;
• electric jigsaw;
• shovel;
• building level;
• crushed stone and sand;
• waterproofing film.

How to make a mini-pond:

1. Prepare a place - a plot must be smooth, without slope.
2. Drop the shovel pit to place a tire in it.
3. Squeeze the tire and check its location by the construction level.
4. Pour crushed stone from all sides.
5. Now you can with the help electric jigsika Cut lateral parts.
6. Put the waterproofing layer, put the rubble and sand along the contour of the tire, press the edges tightly.
7. To close the film, the edges of the reservoir lay out the decorative stone.
8. It remains to fill the artificial water with water.

Children's town from automotive tires

With the help of old car tires, you can build a whole children's town. Consider popular use of tires:

1. Children's sandbox. Spend a lot of effort on the creation of the sandbox do not have to, it is necessary to wear a tire to the ground half, revive the sandbox - coloring it bright colors and fill in sand.

1. Baby swing. What else to do kid at the cottage? Of course, ride a swing, and you can make them from old automotive tires. Just cut in half a tire, cut out interior, leaving the bottom of the seat downstairs, and hang out the ready-made swing on a strong rope. Little kids will love colorful pendant swings in the form of a flower or horses.

1. Rocking. We have to work well to make a children's rocking chair. Work is divided into such steps:

• preparation of the tire - cut the tire so as to get 2 identical parts;
• preparation of seating - cut out the board desired size, attach it to the tire;
• decor - Pray the seat and the foundation in bright colors.

1. Machines, boats, horses, caterpillars. The kids really like to explore the new figures - twist the steering wheel, sit on the horse. From old car tires, you can make a small car with a real steering, headlights and seats.

Tire crafts can be viewed in the photo:

What else can be made of old tires

A person's fantasy has no boundaries. Incredible, but from old tires can be built not only beautiful figures for garden, flower flower beds and equip the playground. From the tires it is easy to make garden furniture or a bed to dog. See how beautiful and tastefully you can make a cozy corner for recreation:

Using the old bicycle tire, you can make a stylish bracelet or a durable belt that will serve the owner for many years:

And here's another interesting idea - You can clamp the old chest with a rubber web from the car tire. It is very original to look at such furniture, and the special efforts do not have to spend. It is necessary to cut the canvas and nail it with small cloves. Get an exclusive thing!

And to create such a figure, you need to get acquainted with the elements artistic thread And stock patience. Not everyone can make such a masterpiece:

It is always nice from the barn things to do something useful, and if the craft is also obtained and beautiful - the pleasure is double. One example is crafts from tires. They make decorations for the country or garden plot, different vases and flowers, build children's rides and even do country furniture - Tables and chairs.

Floweries from Tires

Let's start with the most, probably simple flower beds and flower beds. Do you think make a multi-tiered difficult? Maybe but not from tires. Take a few pieces different size, paint in bright colors and fold the slide - one to another. So that your slide does not fall apart, fasten the tires from the inside with the help of a screwdriver and self-tapping screws. Two on one connection will be enough. Inside fall asleep soil, plant plants. So that the soil does not pumped out, it is possible to store the tire inside the piece. It will remove excess water, but will not give earth. Beautiful tier flower garden ready.

If you like the flower beds, you can do those. For example, folding the flower club in the form of a chamomile. First lay out and fasten the tires in the lower tier. Fill the ground middle of tires, as well as free space inside the circle. There for a better drainage you can lay a broken brick or other construction garbage, sprinkle the earth a little bit and tamper. On the prepared surface, retreating from the edge more than half the tire diameter, lay the second tier. They are also bonded among themselves, the middle falls asleep with soil, and the core is climbing from above. On the top of the tip, you can plant tall flowers, and on the lower tiers - curb or lowered.

Another option of flower beds in the form of a chamomile is in one tier. For its execution, tires will have to cut.

How to cut tires

In general, manufacturing crafts from tires, they often need to cut. It's not easy. It is less easily easily cut off the side surface from the tread. People with severe hands and good knives Do it manually. Good, by the way, training for the brushes and the entire shoulder belt. If you can cut a knife, lubricate the blade with solidol: the rubber is constantly "jars" the metal, and the blade covered well slides.

Also cut off the sidewall with an electric bolt or a grinder. Cut the grinder relatively quickly, but the stench is worth the wild. Because the grinder, even if it is, they only do the first to feed, so that you can enter the pylon of the electric bike. Further work this tool. For cutting rubber take the blade with a reverse toe of good steel.

If you have to cut the protector, do it with a jigsaw or the more knife, it is useless. In any case, an ordinary knife. Even iron cord can cut the blades from special steel, but it is unlikely that someone wants to urge such a tool about old tire. Therefore, they work most often with a grinder. In order not to have trouble, the protector is fixed: always think about security. If the sidewalls are already cut off, the tape tape is rather elastic, it can be squeezed. Cut it will not be solved.

Wheel Vase: Soak tires

If there is a tire with an old wheeled disk, you can make a flower vase from it on the leg.

For this, one sidewall is cut along the tread. And turn out. This is not an easy thing: considerable physical strength and perseverance required. Rubber elastic and expand it from the first time it does not work. If at all at all, on the outside they make notches across the tread. They must be quite deep, but not through. It will also help if there is a depth of at least 5-7 on the edge of the cut. They will look like a fringe on the tire.

Why turn? Inner surface More smooth, and the form may turn out more interesting, especially if the edge is not linear, but toothed. It turns out an elegantly bent decoration.

In detail how to turn the bus, look in the video.

Similarly, you can turn the bus without a wheelbar. The sequence of action is the same. First cut off one of the sidewalls - directly or zigzag. To "petals" were even, they should be placed. Convenient to do it with chalk. By the mark then cut the electric bike or knife (if synthetic cord).

Soak like this: they come to the inner part of the tire, they are taken by the edges of the edge and pull up and on themselves. It is important to achieve the first result: when at least some part arched. If the tire looks like in the photo below, it is already success. It is developed, consistently turning the edge and standing on the part twisted already - so that it does not turn back.

Once again, look at the process in the video. This time turn the tire without a wheel (cut by way with a knife).

Even by itself, such a tire inside out is not bad. If you paint it - it becomes even better. If desired, they can be combined - different colors, Dimensions, differently installed: on the bus or on the legs.

Always beautifully high flower bed. Especially S. ampelnaya plants. It can also be made of tires, and several possibilities. In the photo below, two ways to fix cropped tires at different levels. The first is to use hemp for this, to which nails or self-stakes to mount vases. The second is to use fittings - three four rods to wear rubber. Having exhibit at the desired level of the tier, it needs to be fixed, on metal it can be done only with the help of clamps.

It is not always possible to put a rone to the ground: some sites are so mastered as one square meter Allocate problematic. In this case, the people came up with various suspended vases and, too, from old tires. Only a small part remains from the entire tire, so you have to cut a lot ... Best patience. For example, you can do suspended caspo In the form of a dolphin, parrot, rooster and other colorful birds. Several ideas see not a photo.

Kashpo from tires - parrot, rooster and dolphin

All these crafts from tires. Only a small part of them - the heads are made of dense foam. Cutting and polishing the part necessary form, It is fixed with the help of self-tapping screws, lubricated with glue (this is a secret, remember), and after - paint. How to make a parrot from the tire look in the video.

Ledged below step-by-step photoswhich captures the main stages of creating a table or a panphonic from a tire. We will need two more circles from plywood or fiberboard of a suitable diameter, a hemp rope is used for decoration. From the girlfriend, you need glue and adhesive lint, as well as varnish and brush to apply it. To connect circles with a tire, you will need a screw - pieces of 8-10 and each side.

Next take adhesive Pistol And heating the glue, applied on the sidewall. If there is no such luxury in the farm, take the glue, which in the tub bigger sizetype " liquid nails" Work easier with assembly pistol. Apply a strip on the sidewall, stick the hemp rope. So - to the very top.

By the same technology, decorate the lid of the table (Purph). You need to start styling from the middle: We apply glue, put the rope.

End of work - varnish. We do not do well, so impregnating. That's what should happen as a result. If you did a table, you can put the glass - the rope, even covered with varnish, is not the most best coat For table, though beautiful ...

Diversity can be achieved at the expense of the cover. It can be sewed from a closed dense material.

Cute Puff ...

You can connect - a large binding looks interesting.

Knitted Case of Large Mark - It looks interesting

If you want to sew and knit, you do not want to use, you can use old knitted things cut on strips. They are cut on long stripes with a thickness of 3-5 cm, fed into the balls then wrap the emblem. It turns out interesting, especially if several colors are combined.

If you need a paddle a higher, twist two tires together with self-draws, and in this form work with them further.

For another option, look in the video