Many people use disposable gas lighters, many will ask why refuel gas lighter? Ended up, threw it out, bought a new one and no problem! But now we are not talking about an ordinary gas lighter bought in a stall for five kopecks, but about a good expensive gas lighter, or about a gas lighter that a person close to you gave you, perhaps your idol, there is an option that this gas lighter is dear to you as a memory or is it all that remains of a friend who moved very far or God forbid, died.

I have such a gas lighter. This gas lighter was, firstly, a birthday present. Secondly, the friend who gave it to me moved to live in another country and since he left I have never seen him and this gas lighter is dear to me as a memory. Thirdly, this gas lighter is made in the form of an exact copy of the "Mauser", it looks cool, solid, even a little intimidating. Very often, if I go with her on the street, I have to demonstrate to law enforcement agencies that this is a gas lighter, and not a combat pistol. It burns well "turbine", you can regulate the gas, at the minimum the fire is red at the maximum deep blue, but there is also a small minus the gas runs out very quickly and you have to refuel very often. I faced this problem literally in the very first hour of using the gas lighter, as I got carried away and fired from my "Mauser" all over the place. And then the question arose before me where to get gas bottle chick

Gas canister

Having well celebrated my birthday, the next day with a headache, I went in search of a gas cartridge for a gas lighter. Going to the nearest store, where they sold not only groceries, but also all kinds of non-food items, I was told that they did not have gas cartridges and I had to go to the nearest supermarket. After walking around the supermarket for half an hour, like a Ukrainian looking for gas, and having found nothing, maybe I was looking badly, I decided to go home, and then at the exit from the supermarket I shouted “STOP! DO NOT MOVE! HANDS BEHIND HEAD!" I was attacked by two brave patrolmen who were called by the store's security.

After sitting in the "bobby" for about twenty minutes, explaining that it was a gas lighter, and not a combat pistol for the first time in my life, they let me go, and lo and behold, on the way home, right at the bus stop near my entrance in the stall, I found gas spray... And not one, but three, all different. Without thinking for a long time, I bought all three just in case, since they are inexpensive and happy I went home to fill up the gift. What are the differences, you ask? Initially, the volume of gas cartridges was striking, the smallest was fifty milliliters, the average one hundred milliliters, and the largest was two hundred milliliters. But the differences did not end there, they came with nozzles, the number of nozzles for each gas cartridge was different. As a result, I had twenty-seven non-repeating nozzles and eighteen repeated nozzles, as well as three gas cartridges with a total volume of three hundred and fifty milliliters and an empty gas pistol. Well, the trick is in the bag - I thought, it remains to fill, and you can go everywhere with my cool lighter.

Attempts, trials, failures and solutions

So, sitting down in the center of the room, I poured out a bunch of nozzles in front of me, put the gas canisters, took the lighter in my hands and began the process of picking up the nozzles for the pistol. My surprise was enormous when out of all the multitude of nozzles, namely twenty-seven different ones, none came up. And in the process of selecting a nozzle, I
noticed another difference in the gas cartridges. The fact is that the gas from each cartridge had a different smell and, as it turned out later, had different combustion properties, for example, one smoked very much, the second did not ignite the first time, the smallest cartridge turned out to be normal. And I want to give you some advice: refuel lighters on the street, well, in extreme cases, on the balcony, on the open ventilated balcony, because after refueling, the apartment smelled strongly of gas.

After I broke a couple of nozzles that almost came up and let the gas through a little and smelled the whole apartment of gas, I went outside to continue experiments there. Going out into the street and safely reaching, to the nearest shop, I found that I took only a pistol, a lighter and gas cans with me, and all the nozzles remained at home. What happiness and relief was when, out of laziness to go back home, I decided to try to refuel the lighter just directly, without nozzles poking the can into the lighter. There were bubbles in the gas cylinder and after about thirty seconds the lighter was refueled and ready to delight me with its flame. Conclusion we take a gas canister, a lighter that can be refueled, do not put on any nozzles, and after shaking the bottle a little, press it for thirty seconds to the lighter, that's all!

Time passed disposable lighters for a couple of rubles. Now gas lighters with the likelihood of re-filling have become in vogue. Prices for excellent models of lighters start from several tens of bucks, so it became unprofitable to continuously purchase such luxury items.

You will need

• Triple purge butane gas and lighter.

Instructions

1. Like any luxury item, lighters require special attention to themselves. They need to be kept in excellent conditions... The main factor in buying a lighter is maintaining the fire, the likelihood of setting fire to the desired item. Cigarettes, cigarettes, and cigarillos are the primary uses for gas lighters, and the main problem is gas refueling. Because when refueling, you need to learn a few main nuances: a gas lighter will not work well if you do not release oxygen before refueling, the one that accumulates inside the lighter.

2. It is necessary to use the lighter to the end, i.e. wait until the gas in the lighter finally runs out. Later, you should close the lighter and adjust the gas supply valve, the one that needs to be set to minimum. Then use a pen or other sharp object to push or pull back the gas filling valve. This will ensure that there is no excess gas in the lighter. Now try to neatly extract the fire from the lighter. This will allow you to get rid of excess air in the lighter. Start refueling.

3. You will refuel the lighter with triple cleaning butane gas. Why triple cleansing? Everything is hefty easy. Three degrees of cleaning - a guarantee of the slightest contamination of the lighter during operation with this gas. Insert a gas cylinder with a nozzle into the lighter refueling valve. You will hear the classic hissing sound. As soon as the lighter is filled with compressed gas, disconnect the cylinder from the lighter valve. If you have never done this, you will still feel that the gas does not go any larger. Some models of cylinders work according to the thesis of metered filling, i.e. you will do multiple refueling sessions. This is an economical cylinder indicator.

In order to correctly charge the lighter with gas, several general recommendations should be followed.

To refuel a lighter, you must first cool the room. If refueling is done outside, then the temperature should be at least 18 degrees Celsius. It is necessary to exclude any presence near permissible sources of ignition - an open flame, sparking wiring of electrical equipment, etc. Refueling the lighter should be carried out, observing all safety measures: keep your eyes from accidental gas ingress, do not inhale gas - irritation or poisoning is permissible.

In order to fill the lighter with gasoline correctly, the following recommendations must be followed:

Related Videos

If the flame of your favorite gas lighter has ceased to shine happily in the night and you have nothing to light a cigarette with, then it has run out of fuel, that is, gas.

You will need

• Lighter, can of gas for lighters, a little savvy

Instructions

1. If the design of your gas lighter provides for its refueling, then you should look into a specialized store or kiosk, taking a lighter with you. When choosing a spray can, it is cooler than everyone to pay attention to special cans equipped with a cap, under which there should be a set of nozzles, for different types lighter valves. There can be up to 10 nozzles under the cap, which guarantees you a good refueling. Looking around the nozzles and comparing them with the design of the lighter valve, you will realize which one is right for you.

2. It turns out, having preferred a suitable nozzle, it must be broken off from the bottom of the cap, then put on the valve of the can. Clean the lighter crossover valve of admissible blockages (it is easier for everyone to do this with a clean ear-cleaning stick). After that, inserting the nozzle into the transition valve of the lighter, press the can with force. If a gas leak occurs, check if the nozzle and the lighter valve match. If so, replace the nozzle. If there is a match, try again.

3. How to tell if a lighter is charging? It should become cold, icy, because liquefied gas under pressure reacts with the environment and cools objects.If the lighter is transparent, you will be able to make sure that it is full visually. If not, then 20-30 seconds of download is enough for a full charge.

Note!
When refueling the lighter, use only a special can of gas.

Helpful advice
When refueling a lighter, follow the rules fire safety! Do not smoke under any circumstances, do not stay near an open fire, remove children and animals! Remember, gas is flammable and neglect can lead to tragic results.

There are several methods for making a lighter from liners which we will share with you today. It would seem, what for, if different lighters are sold around? The fact is that it may not always be at hand. But the skills of making a homemade lighter will never hurt. By following our instructions, you will be able to show off an independently made lighter.

Instructions

1. Method 1. Prepare a sleeve, a new zippa (or find a worn one), a torch and copper-silver solder. Gut the flint from the zippa and take out the disk from there, the one that strikes on it. Next, take out all the contents of the zippa: disc mount, filter and packing. Arrange and solder all contents. Remove all roughness with a file, giving the correct shape. Drive the soldered contents of the zippa into the sleeve, insert the wick and fill the top with gasoline. The lighter is ready.

2. Method 2. Prepare a tight metal tube. Punch a hole in it for the wheel. Place a special flint for a lighter with a spring in the hole for the wheel. The flint should be with a small rubber band. Make a cap with a wick out of strong metal or alloy. Collect the entire structure. Take an empty case. Solder the prepared metal tube to the sleeve. Refill with gasoline. The lighter is ready.

3. Method 3. Prepare a sleeve and cotton cord. Cut a small slice of cotton cord and dip it into the sleeve, moistened with gasoline in advance in order to protect it from moisture. Leave the outer end of the wick peeking out in order to ensure interaction with the flint. Make flint from a file. To do this, solder a small piece of file, about 5 cm in size, to the sleeve. Pour gasoline into the sleeve. The lighter is ready.

Related Videos

Quite often there is a need to have on hand lighter... For such purposes, it is comfortable to hold lighter running on gasoline: they give a good flame, are comfortable to use and store and do not extinguish in the wind. However, over time, the question arises of how to refuel such lighter... Several useful recommendations will help you understand this matter and fill it up correctly lighter gasoline .

Instructions

1. Gasoline-fueled lighters consist of a gasoline container containing a wick soaked in gasoline... The flame is produced by rubbing the gear against the flint. Gasoline lighters durable and true. V expensive models the volatility of gasoline is minimized, as evidenced by the lack of smell of gasoline when used. However, let's move on to the issue of refueling.

2. Before everyone needs to work out every gasoline, the one that is closer to the lighter. Then remove the insert from the lighter body, lift the felt pad on the bottom of the insert. It is advisable to carry out all work in rubber gloves, only if refueling lighter gasoline for the 1st time. With this method, it is allowed to protect your hands from accidental spilling of gasoline.

3. Now slowly saturate the insert material. gasoline without overflow. Insert the fuel chamber back into the lighter body.

4. Make sure not a drop of gasoline has been spilled. Wipe off the body of the lighter and hands thoroughly before use. The combustible is explosive!

5. Wear after the first dressing lighter with the lid facing up in a vertical position. Refuel the lighter with an extraordinary special gasoline for lighters. Remember that breathing gasoline fumes can be hazardous to your health.

Note!
Refuel in a well-ventilated area, away from sources of ignition and do not spill gasoline.

The first gas lighter originated in Paris in 1947. The ordinary wick was replaced with a non-standard valve, petrol - for gas. Cigar lovers were overjoyed at this innovation, having ceased to feel the pungent smell of gasoline. Refillable gas lighters are excellent as a gift option, and are also comfortable to use, but have some refueling features.

You will need

• gas cartridge for refueling lighters, adapters.

Instructions

1. In order to fill a refillable lighter with gas, you should first take care of the safety of this event. Make sure there is no open flame nearby, say, on a gas stove; no hot objects such as heating devices with filament, electric hotplate included. Never smoke during this time and do not refuel the lighter next to other people who are currently smoking.

2. Good method refueling is further: when the lighter has completely stopped emitting flame, open the exhaust valve to the maximum, hold it pressed for 3-5 minutes, simultaneously pressing the inlet valve with the writing end of a ballpoint pen. The remaining gas would have come out before, but not entirely - heating the lighter in your hand gives the best result. Screw the inlet valve back on as far as possible and leave the lighter to cool for 10-15 minutes.

3. While the lighter cools down to room temperature, hold the canister in your hands for the same purpose. Usually, a set of six adapters is sold with the cylinder, one of which is matched to the lighter valve empirically: it fits snugly into the valve receiver and does not let the gas out. Slide a suitable adapter onto the cartridge fitting and shake vigorously several times.

4. Take the lighter up with the intake valve; check if the gas supply button is pressed; If there is no cap, insert the cartridge adapter into the refill slot from above. Press in 10-15 seconds upper hand two or three times, without pulling the adapter out of the valve to the end. Repeat this operation a few more times.

5. Then leave the lighter for a few minutes until the gas heats up. Later, open the gas supply tighter, light the fire for a few seconds (be careful - the flame will turn out to be high) - this action will blow through the nozzle from carbon deposits. Reduce the gas supply to a more harmless one. Now it is allowed to use a lighter.

A pen Parker - a unique thing. When George Parker conceived his creation, he decided: "Make it cooler than others." And he managed to carry out his plan: he made a thing that became a sign of a special culture, high genre and luxurious taste. Pen Owners Parker- people who have achieved a success in life. On purpose, for such a unique pen, a unique ink was made, with which it is allowed to fill the pen in order to use it again and again.

Instructions

1. Fountain pens Parker have a reversible refilling system with bubble ink or capsule Parker... PARKER QUINK capsules have an additional ink reserve or are equipped with a reserve tank. After approximately complete emptying of the capsule, click on the end of the capsule. This will release a spare portion of ink.

2. The number that is contained in the reserve capacity will be enough for a page of an ordinary letter. This indicator varies, of course, with the span of the handwriting and the width of the nib. The number of ink in one capsule is enough to draw a line of 800 m. In fountain pens Parker use only PARKER capsules, as the inferior quality ink can damage the pen.

3. To refill the pen with a capsule, remove the cap. Unscrew the sleeve from the top of the housing. Remove filler with empty capsule. Insert a new capsule with the wide end first. Carefully, but quite firmly, push the capsule with your hand. When you feel that it has pierced and, perhaps, you hear a classic sound, stop pushing. Now screw the sleeve back on.

4. To fill the handle from the bubble, two filler options are used: a typical piston and an exclusive rotary. In order to fill the handle with the help of the rotary filler, you need to unscrew the sleeve. To create a vacuum, squeeze air out of the ink reservoir by turning the plunger downward.

5. Dip the pen into the bubble. Make sure that it is completely immersed in ink and air does not get there. Never dip the filler into the ink, just the nib. Screw the piston back up to the limit. Remove the nib from the vial, and turn the plunger to drop three drops of ink. Re-tighten the piston to the limit. This is required so that a little air is drawn into the tank, which will prevent leakage. Clean the pen.

6. To prime the handle with the support of the piston slider filler, press the lever located on the side. This is how you move the piston. Submerge the nib completely into the vial. To create a vacuum, push the lever downward, and upward to suck in the ink. Then, remove the nib from the ink. After releasing three drops, raise the lever until it stops. Clean the nib.

In most cases, when a gas cylinder runs out of gas, it is easier to purchase a gas cylinder than to try to fill it. However, as traditionally, people want to save money and find a method for refueling a gas cylinder in order to avoid a purchase. In fact, this is not so difficult to do. Easily follow specific instructions and take safety precautions.

Instructions

1. It turns out, take an ordinary household gas cylinder with a valve (from 5 to 300 liters). Install it upside down in order to ensure that it is the liquid gas that flows out. To do this, you can make a special stand or hang it on a rope. You can also primitively put it in a huge, dilapidated chair. There are a lot of options, the main thing, so that the position of the cylinder is stable and correct.

2. Next, assemble the filling system, which consists of 2 hoses, an adapter, a tap and a threaded head. Take a better tap, hoses, adapter and cuffs from gas equipment, desirable for liquid nitrogen. This will ensure the longevity of the system. If you take ordinary water taps and pipes, the system will quickly break down. Assemble everything and fasten it tightly with couplings. Do not use the reducer, it will only slow down the refueling process.

3. Screw the adapter onto the gas cylinder thread. You will need a valve to adjust the gas supply. Be careful not to use the cylinder valve, because it will fail quite quickly. Take the gas-threaded head from a worn cutter or torch. In the case of the cutter, everything is more and more ready for attachment to the hose, and, perhaps, it will take longer to tinker with the torch, because its diameter is unsatisfactorily huge for the hose. Make the collet cooler metal, do not use plastic. If you tackle this very closely and understand all the details, creating a gas filling system will not take you more than one day.

4. Now start refueling at ease. The gas flows relatively slowly, therefore, it will take from 3 to fifteen minutes to fill one cylinder, depending on the assembled system and the volume of the cylinder. The weight of gas is indicated on any cylinder, therefore, it is allowed to control the filling with the help of scales. Or by eye: after filling half of the cylinder, release the gas and fill the cylinder to the top.

5. If refueling is carried out neatly and in accordance with each rule, then it is allowed to refuel the cylinder from 3 to ten times. Most importantly, remember that if there is any external damage to the cylinder, it is better not to risk it and buy the newest one.

Related Videos

Note!
Gas for lighters. LPG cylinders with a volume of 300 ml are intended for filling portable gas appliances, say, heaters, blowtorches, lamps, gas stoves. Six adapters allow you to use gas for lighters with different equipment.

Helpful advice
What gas to refuel dupont lighters To refuel a dupont lighter, you need to use genuine s t dupont gas in order to avoid drying out the rubber gaskets inside the dupont lighter, which can cause the lighter to leak gas. Dupont lighter gas has as many as 4 varieties.

Before refueling the lighter, you need to sit comfortably in a well-ventilated area. Having the skills will help you do everything right. You should take into account all safety parameters, know where you can buy quality goods and what you can refuel. You can purchase the simplest can of gas or gasoline for refueling lighters, for example, from the Runis company, S&B, etc.

By the way, n it is good for sheep to know about how to understand that your favorite lighter is refueled. For this in the time of refueling should be carefully listened to. When the hiss and the quiet whistle will stop Is a sign about that the tank is full of gas.

How to fill a lighter with gas without a spray can?

The time for disposable lighters is over and it's time modern devices with the possibility of secondary refueling. Fuel quality and skill availability remain major concerns. It is worth getting information in advance about what kind of raw material is used for filling and where you can buy it.

The gas lighter is used to the end; before refueling, you need to make sure that all excess air is released.

The main difference between turbo lighters is that the spiral is heated there, and as a result, a flame is obtained. During refueling, keep the cylinder upright and press firmly, listening to the sound.

The lighter pistol can be refueled. There is a small hole at the bottom of the handle through which gas replenishment takes place.

By the way, experts have made a special mixture - propane-butane, which is better for replenishing fuel in pocket lighters.

When buying a Cricket, many are wondering whether it is possible to refuel with disposable gas?

At the moment, Criket is in high demand. This model is favored by users for whom the issue of quality and durability is important.

This product goes through forty stages of quality control, and manufacturers have provided for the possibility of refueling with gas from a cartridge. To do this, you need to follow simple recommendations:

• the lighter must be in good working order;
• in a specialized store you need to pick up a small gas canister;
• during refueling, there should be no sources of open fire nearby;
• Do not fill up a Cricket lighter, as the gas is supplied under pressure and oversaturation can lead to an explosion.

How to refuel a disposable lighter?

Convenient lighters are becoming indispensable helpers, and it's hard for owners to come to terms with the idea that the life is limited by the amount of fuel inside.

A disposable lighter is filled with gas from a can in the following way:

1. First, you need to disassemble the product, memorizing the location of the parts or recording your actions with a camera.
2. Next, unscrew the flame adjustment screw (no more than 1-2 turns).
3. Unscrew the valve as much as possible. Then we press the button responsible for the gas supply and insert some obstacle under it. A sharpened match or toothpick will do.
4. With one hand we put the can on the valve and press it tightly for 10-20 seconds. With the other hand, you need to carefully pull out the matches.
5. Next, carefully tighten the adjusting screw and put all the parts into place.
6. The last step is to check the height of the flame.

Household Bic - irreplaceable assistant, which will serve regularly for several years. It is specially made for gas stove... This product is disposable, it is not possible to fill it with gas from a can.

The Mega Lighter fits comfortably in your hand. There is a transparent window in the glass, in which you can see how much gas is still left. It can be hung on a hook or stored horizontally. In the hustle and bustle of everyday life, it can fall, and then the question arises as to whether it can be used further. Practical use proves that given view not subject to mechanical damage and will serve properly.

How to refuel a Dupont lighter?

All users who have Dupont at their disposal know that this species can be refilled. In doing so, you need to have extraordinary patience and skills. Depending on the model of the lighter, the manufacturer offers color variety gas.

Some models have threads, and the gas cartridge is simply screwed in. At the same time, there are many inconveniences during refueling. For example, in the process of unscrewing the cylinder, the gas comes out uncontrollably.

Manufacturers have created a new line of gas cylinders, and now they are enough for 4-5 charges. It is quite difficult to refuel "DuPont" without an adapter with a new portion of fuel, experts recommend using special equipment... Without an adapter, the owner will have to look for a craftsman who will refill the cavity of the product with gas.

How to refuel a Djeep lighter?

The Feudor lighter is the best option for connoisseurs of quality. It combines ease of use, high durability and elegance. An interesting option an alternative to matches is the Zenga 50 product. In order to ensure long-term use, you should purchase a special gas cylinder (in the kit it will be supplied with adapters, with which refueling will not take much time and effort). Chinese lighters make up the bulk of the product offer.

How to refuel a kitchen lighter from a can?

A special type of lighter has been created for a gas stove. This accessory is essential in the kitchen and has an unlimited number of advantages in comparison with matches. There are such types of products:

• gas;
• gasoline;
• pieza.

The procedure is simple: remove the cap and press the spout against the valve located at the bottom of the lighter. Press and hold in an upright position for about 5-10 seconds. If the hissing persists, repeat the procedure after a couple of minutes.

How to refuel a gasoline lighter?

Manufacturers have provided for the possibility of refueling products with gasoline. Depending on the brand of the product, the main rule must be taken into account: refueling is done with exactly the fuel that was originally filled.

On the forums, you can often see that users are worried about the question: how can you refuel a lighter? It should be noted right away that motor gasoline is not suitable, in specialized stores they sell a special one - flavored. In addition to gasoline, it is not recommended to use other fuel options, since there is a possibility of breakage and even an explosion of the lighter. With constant use, the need for refueling increases. The earlier the procedure is performed, the longer the product will last.

How to refuel a Zippo lighter with gasoline?

Zippo lighters are not very popular with smokers.These accessories are of the highest quality, but the price of such a lighter is quite high.

As a rule, a lighter from this company requires refueling with gasoline. It is best to purchase a branded product of the company Zippo for fuel resupply, as they are guaranteed to be suitable for these products.

Remove the housing before refueling. Raise the angle of the valve. There will be an inscription Lift to fuel. Gently start filling the cotton with liquid. Avoid skin contact. After that, collect the lighter and set aside for 10-15 minutes so that the cotton wool is properly soaked.

Make sure that there is no oversaturation, as otherwise an excess of product can be observed on the wick.

How to refuel a lighter with a wick?

Gasoline lighters without a valve can be refueled without spending a lot of time. They remove the case, take out the gasket and gently moisten the cotton wool that is already in stock. Or, using tweezers, remove the old one and replace it with a new one.

If you need to replace the wick, a screwdriver will come in handy in order to carefully unscrew the small spring and replace the burnt-out cord.

Do not forget about the classics. For smoking pipe quality tobacco and proper care are essential. The use of this accessory will save a lot of time, and the skin of your hands will not be exposed to the harmful effects of substances that are used in the manufacture of modern cigarettes.

How to refuel an autogenous lighter?

On the back of the product there is a valve through which fuel is replenished in the lighter cavity. It is worth making sure that there are no obstacles and access is not blocked by debris.

How do autogenous lighters differ from analogues? Only by the fact that in windy weather the flame burns evenly, and the product will not let the owner down.

Gone are the days when lighters could be thrown away after they ran out. They were replaced by those that can be refueled. Their prestigious models cost more than ten dollars, it is a pity to throw away such a thing, but constantly buying will hit the budget. They require a reverent attitude towards themselves and it is necessary not to wet them and fill them with high-quality gas.

How to fill a lighter correctly?

We take butane gas and a lighter and start refueling. Remember that first of all it is necessary to get rid of oxygen by releasing it, otherwise it will be worse at supporting the flame. The second moment before refueling the lighter, you should completely use it up. To do this, it closes, the valve is regulated, and then it is set to minimum. Then move the valve with something sharp, so you understand that there is no more gas in it. Carefully try to ignite, so excess air will come out.
It is refueled only with triple purification gas. Why is it so? At the very least, in this way you can ensure that the lighter does not get clogged and works like a clock.

The next step is to insert the cylinder with the attached nozzle into the filling valve. It will be like the sound of a hissing balloon being deflated. As soon as it is filled with blue hot, you can immediately disconnect them. You yourself will intuitively feel that the gas is no longer coming, because there is nowhere to go. There are types of cylinders that work on the principle of metered filling, that is, it is necessary to connect and inject liquefied gas several times.

• Initially, it is necessary to release all hot residues from it.
• We relieve pressure with a match, knife or other thin object by pressing the valve.
• We compare the temperature of the lighter with the temperature of the room.
• If it has a flame height regulator, then you need to set it to the minimum level.
• We are looking for an adapter for the filling valve.
• Before starting the filling process, the cylinder itself is turned over
• The filling valve must be turned so that it "points" up
• The cylinder rod and the lighter valve are connected during refueling
• On average, the cylinder is refilled for five to seven seconds, while the connection of the stem to the cylinder must be held for a good refueling.
• Before refueling, if you come from the street or it was lying in the sun, wait until it adapts to room temperature. This is necessary for gas impregnation of the reducer.
• According to experts, the lighter should lie a little in the freezer before the refueling procedure, then it will be much easier to refuel it, the internal cavities, because such filling is much denser.

Safety rules for refueling lighters

If the refueling procedure is going to be carried out, it is best to open the windows and doors well to ventilate the room. If you fill it out in a street environment, then you need to temperature regime environment was at least 18 degrees. Should be excluded open sources fire: flames, faulty wiring and similar phenomena.
For refueling, it is better to put on gloves on your hands and protect your eyes from the gas. You can not breathe it out, you can get an allergic reaction or gas poisoning.

If the lighter is gasoline, then the same conditions should be followed for the refueling procedure. That is, the fuel should not fall on the hands, in order to avoid irritation of the skin. With such a hit, they must be immediately washed clean with soap. warm water... Before lighting it, you should look again so that there are no leaks anywhere. Otherwise, gasoline may catch fire on clothes or hands.

Many are worried about the question why you can't fill the lighter completely gas? If the lighter is filled with gas to the end, then there is a high probability of explosion and burns, because the gas used as fuel is under pressure.

The invention of refillable lighters is a real discovery, and not only for those who like to smoke cigarettes or Cuban cigars. Tourists and travelers also need these portable incendiary devices. But how to refuel a lighter if it suddenly stops working? First, they look at the brand and the combustible substance on which it works. The main varieties are gas and petrol models... For expensive brands, special gas or petrol cylinders are sold. They pass up to 3 degrees of purification and do not destroy small parts branded incendiary devices. Self-refueling will require attention and skill.

How to fill a lighter with gas from a can?

First, they purchase a bottle of butane gas. There are 5-6 adapters on it, among which there is one suitable for a particular lighter model. But before refueling, you need to make sure that all the gas inside the lighter is used up.

1. The valve must be pressed with a match, pen, pencil to release excess oxygen. The device is cooled down to room temperature for safety reasons.
2. Regulate the flame, you can move its position to the minimum height. Pick up desired valve, fix, turn the balloon upside down with the filling part.
3. While carefully holding the crossover valve, refuel the lighter continuously for 5 seconds. After refueling, the device is not used for about 5 minutes, so that the pressure is equalized, and the porous rod has time to be saturated with gas.

How to refuel a lighter: follow the instructions.

They also remember about safety precautions. Do not fill the incendiary device near a fire; if the gas accidentally gets on the mucous membranes or skin, it is immediately washed off.

How to refuel a gasoline lighter?

Refueling a gasoline product is almost the same as refueling a gas lighter. Also, for branded accessories, special cylinders with refined gasoline can be produced, you need to ask at the points of sale of branded incendiary devices.

• Before refueling, remove the core from the body. Turn the lighter over and look at the bottom. There is an entrance for a filling device.
• Pour gasoline, but carefully monitor the filling. Spilled fuel is removed immediately.
• After the end of the filling, the chamber-entrance is closed, only after that the core is inserted back.

It is important that it is better to refuel incendiary devices away from fire and fabric pieces of furniture. Gasoline thrown onto the sofa can easily ignite if the accessory is used carelessly.