How to paint a polyurethane skirting board. How to paint a ceiling plinth

Painting the plinth of the ceiling in the renovation of a room is quite important point... After all, he must be flawless. The slightest flaw will be visible. First you need to decide what to paint ceiling plinth from foam and a donkey to do the job right. Below will be set out full instructions according to the rules for performing this work.

Currently, many people decorate the junction of the ceiling and the wall with special ceiling plinths or, as they are more correctly called, fillets. They have a beautiful effect.

Such skirting boards even with plain wallpaper, a familiar finish, a chandelier, are able to design and make a new, unusual, individual image. Now there is no need to fix heavy massive elements.

Attention: Such baguettes are produced from polystyrene, polystyrene, polyurethane. They are initially white. Due to its natural white color, many people wonder whether it is necessary to paint the ceiling plinth, if the color is already suitable? Let us examine this issue sequentially in order to understand some points.

So:

Ceiling moldings have pores, scratches. With a certain incidence of the light beam, they can be seen.
The material from which the skirting boards are made is slightly translucent, and after painting it, the look changes, and it becomes stronger.
If the plinth is not painted over, then after a while it will not be difficult to notice dust and yellowness - without paint, the material takes on an unbearable look. In the case of painted ones, dust and stains can be easily removed with a damp sponge.
When fixing skirting boards, there is one caveat: the joints. Many are afraid of them. So these places are not visible, only after filling with subsequent painting. Otherwise, gaps remain. This situation cuts the eye and spoils the integrity of the whole image.
If the baguette is made of wood, it is also treated and painted with paints or varnishes. So it is really more beautiful also prevention from insects.
Of course, they also paint to change the color of the skirting board. For example, to match the ceiling.

But can the skirting board be painted if it has already been attached to the ceiling? It is possible, but it is necessary to seal up the cracks and joints first. It is more convenient, of course, to paint before gluing, but then you will have to paint again after covering the joints. Thus, first you need to glue, then cover up the joints, and then paint. With this technology, the result will be great. Even experienced repairmen will appreciate your work.

How to choose paint for your ceiling plinth

First of all, it is decided what to paint the ceiling plinth with, you need to think carefully, because the planned result depends on the choice of paint.

There are paints that contain solvents, and from them the structure can simply dissolve. Therefore, it is necessary to select water-soluble paints. Acrylic water-based or latex, water-dispersed are suitable. Wooden baguettes are more resistant to different paint compositions, you can experiment with them.
On sale there are spray paints for skirting boards. It is applied before gluing to the wall. In this way of application, the coloring is fast and uniform. If you need to change the color of the skirting board and you did not find such a finished product, then this issue is solved with the help of pigments. Buy the color you need, mix it with the base paint white, bring to a uniform color by stirring. You can do this both independently and in the construction department with the help of consultants.

Almost every homeowner dreams of stylish interior, but to carry out our plans only with the help of main surface finishes will not work.

The finished image of a dream will be exclusively with the use of decorative elements, which includewide polyurethane foam floor skirting board.

In contact with

Reason for popularity

More recently, it was widely used standard skirting board, which was extremely inconvenient during operation. For example, furniture simply could not be placed against a wall. Concerning modern models, then they not only solve the problem described above, but also protect the walls from mechanical damage.

Height from 100 to 150 mm, which is very convenient during the cleaning process, that is, the wall will not be damaged by moisture. But this is not all the obvious advantages, one more important thing: thanks to the impressive width with the help of this decorative element you can easily hide the communication wires. This problem especially relevant if there are animals or children in the house.

To polyurethane corner skirting boardcould look harmonious in the interior, you will need to follow a few simple rules:

If the ceiling height does not exceed two and a half meters, the width should not be more than seven centimeters.
If the height no more than three meters, then you can use a skirting board, the width of which is no more than nine centimeters.
When the ceiling height more than three meters, then you can safely use a 10-centimeter baguette.

Attention!The main advantage of this element is durability, that is, during prolonged use it will not lose its physical properties, color and shape.

But it is especially important that polyurethane product able to fit snugly on any uneven walls, which cannot be achieved using the same wood products.

How to choose the right one

On construction market can meet two types of this product:

whole;
flexible, where there is a groove to hide the cable.

One-piece has groove for cable passage, but on the side that is close to the wall surface. And the second type of product consists of two parts, in the larger of which there is a groove for wiring. It is this channel that is hidden under a special bar, which, if necessary, can be easily removed, and access to wires becomes open.

Choosing this kind of product, it is necessary to pay attention not only to color and shape, but also to size. It should be borne in mind thatplinth, texturewhich is complex enough, must correspond suitable interior... Besides, important role the following highlights play:

Presence of a groove for wiring, that is, depending on the thickness of the wire, you will need to select the appropriate baguette.
Flexibility. This parameter will be extremely necessary in the case of curved walls, but it is important that the bend does not turn out to be less than the curvature of the wall.
Appearance. On some baguettes, a pattern can be applied that imitates stucco molding, but they are rarely purchased, since in most cases strict baguettes are preferred.

Usually, White polyurethane skirting board highly demanded due to its design and attractive outward appearance.

Through it they will easily cables stretched and even led strip... In appearance, it is similar to plaster molding, but during operation, its advantage is noticeable.

It can even be installed in a bathroom or near heating, as this material absolutely not afraid of exposure high temperatures or humidity.

But the flexible product is suitable for framing columns or when used for decoration in a room where there are no corners.

Advice!If the buyer decides to choose a polyurethane skirting board, then it is necessary to ensure that at the time of purchase, the kit includes additional elements, for example, corners.

Make sure that the selected the baguette has grooves for this. Also, you should first measure the diameter of the cable, otherwise it will not be able to enter the plinth, and you will have to change the product.

Possibility long term service consists of the density of the material used, that is, the fewer pores in it, the longer the baguette will last. In addition, the surface must be perfectly smooth and even.

Dimensions and positive qualities

Features of this product determined by the presence of polymers and their composition. For example, some products may be elastic, while others are denser, but in any case, all polyurethane skirting boards:

easy enough to mount;
are relatively lightweight;
resistant to damage;
add style to the room;
immune to temperature changes;
do not deform from exposure to moisture;
resistant to adverse influences;
they can be painted in the required color;
immune to the effects of ultraviolet rays;
easy to use and care for;
environmentally friendly;
correspond to a low price category.

Regarding painting, then it is better to carry it out with the help acrylic paints, which are sold in cans. But here it is important to consider that this product can be painted only after 24 hours after installation.

Floor polyurethane skirting boardscorrespond to a length of two to two and a half meters and a width of twenty to twenty five millimeters, the height of the products ranges from fifty to sixty millimeters.

This data applies to standard skirting boards, while wide skirting boards can reach ten centimeters.

Important!When choosing a baguette, it is important to consider which ceiling product was used: if it is wide, then the plinth must match.

Despite all of it positive properties, polyurethane skirting board also has two disadvantages, which when correct operation will not be felt:

Polyurethane is sufficient dense and durable material , which practically does not deform with use, but it is a little heavy. Due to this fact, when gluing with your own hands, slight difficulties may arise, therefore it is better to entrust this to specialists.
Resistance to temperature differences persists only if it does not happen all the time. Therefore, it is better not to place the baguette near gas stoves or other appliances that may heat it up. This impact can lead to surface cracking or other deformation.

Do not be surprised at the higher price in comparison with analogues, made of foam, since they are much more durable during operation.

Installation process

How to install polyurethane skirting board flooron one's own? This decor element is good in that it does not require special training and skills to fix it. The baguette can be fixed on self-tapping screws, dowels or simply planted on glue, most often they resort to the latter option.

To secure baguette with glue, necessary:

Buy glue putty, which must correspond to the manufacturer, otherwise the product will simply not hold. Usually, for the convenience of builders, glue is already sold in cartridges.
Manufacturers and professionals do not recommend using liquid nails, since they have a destructive effect on the base.
Most often, the kit is already available corners and plugs, but if they are not there, you can cut the corner yourself. To do this, you need to measure the angle of convergence of the walls and measure it with a miter box, and then saw it off.
Installation of a floor plinth polyurethanestart from the corner, after which they move on to the rest of the segments, which will be in a straight line. They will also need to be pre-cut with a miter box to the required length.
Before how to apply glue, you should measure it required thickness, which must correspond to the filling of the gap between the skirting board and the wall. To do this, the baguette without glue must be applied to the wall, and it will approximately be seen what the gap is.
The adhesive should be applied to the plank using silicone gun... It is not necessary to smear too much glue, two continuous strips are enough. After that, the applied glue is distributed over the entire width of the product.
Choosing a place for applyingadhesive for polyurethane skirting boards, it should be borne in mind that it will be required at the joints and corners, but from one of the sawn sides.
In case of use wide baguette glue will need to be applied to the full width.
Plank with glue tightly applied to the wall and held for several minutes.
Excess glue just remove with a damp sponge.
If, after applying the plank to the wall, it turns out that there is not enough glue, you will need to apply just enough to he partially went outside.

In this case, it is more advisable to use only the wall, since some types of floor coverings the ingress of glue is unacceptable.

The use of the adhesive is quite simple, but if any defects appear, dismantling will be very laborious. Therefore, some experts suggest using other types of fastening.

But in this case you will need purchasing other options, which have a bar designed to hide the mount.

Important!The issue of cutting corners is especially difficult, so you need to practice first, and only then cut the product for installation.

Without the use of glue means the use of the following materials:

pencil;
square;
roulette;
knife;
miter box;
dowels.

The whole process of fastening is absolutely similar to that described above, the attachment points can be covered with sealant, and the screws will not be visible. If the room is relatively smooth walls , then the installation process can be performed independently.

Installation of flexible skirting boards

Flexible floor plinth polyurethanecan be installed in two ways:

Installation in advance fastening system, which is a clasp or clip. Subsequently, the baguette is simply fixed on them until a characteristic click. But this can only be done on flat walls.
Installation with dowels. To do this, you will need to cut the strips to the appropriate size. Approximately every thirty centimeters in the plinth with a thin drill is made through hole... And in the wall itself, it is done with an ordinary six-millimeter drill.

Most convenient in this case, which consists of two parts. That is, the strip must first be removed and holes made in the cable channel.

If the product polyurethane for flooringone-piece was chosen, then the places of the presence of self-tapping screws are simply closed with plugs, by the color of the corresponding coloration.

Choosing a flexible skirting board made of polyurethane, you do not have to worry about the upcoming renovation in the future, as it has a soft top bar, where you can easily fill in new wallpaper.

When is the best time to paint the baseboard

Painting is easiest when the skirting board is still on the ground. In this case, there is no need to work with a stepladder and there is no likelihood of accidental soiling of already finished walls. If you decide to do this, then first you should cut the fillets to the required size, adjusting them at the corners. After installing the skirting boards themselves, you will have to deal with sealing and painting the joints, while this stage of work can cause paint to get on the walls. Therefore, you need to decide on the need for such an installation.

Experts recommend painting the skirting boards after installation. Naturally, this approach is much more complicated, but the finish itself will turn out to be more solid and neat. If the ceiling and skirting boards have the same color, then they can be painted at the same time, before pasting wallpaper or any other finishing of the walls.

If the skirting board needs to be primed before painting, then this procedure can be carried out until the moment of its installation and adjustment.

How to paint a ceiling plinth

Preparation for staining

Before the start painting works it is necessary to get rid of all possible installation defects. It can be not only fillet joints and corners, but also dents and scratches on the surface of the skirting board. To eliminate such disadvantages, you can use a fine-grained finishing putty or silicone sealant white (more: ""). For work with wooden skirting boards, it is better to use a special wood filler.

Preparation for painting ceiling skirting boards consists of the following steps:

Prepare any of the above materials, a soft cloth with water or a sponge, and a rubber spatula. A flexible plastic plate may be used instead of a spatula.
Putty is applied to the spatula, which is used to cover the joint. It is necessary to move along the seam, from top to bottom. The spatula should be pressed tightly against the baseboard, but do not overdo it. Here it is necessary to repeat as much as possible all the bends of the profile.
Excess filler is removed with a sponge.
Corner joints can be conveniently sealed with putty on the tip of your finger. In this case, work should be done with gloves.
It is also necessary to seal all gaps between the baseboard and the ceiling or wall.
After the filler is completely dry, you can start cleaning the irregularities with a fine sandpaper.

Before painting the plinth on the floor, its surface is covered with paper or foil. If the walls have already been exposed finishing, then they need to be protected. For this, masking tape is glued along the plinth. Do not hope that water-based paint can be easily wiped off, since it is not so easy to do this on wallpaper (especially with a textured texture).

We hope this material helped you figure out how to paint ceiling skirting boards. If some points of how to paint a ceiling plinth are unclear for you, video instructions will help you.

The final moment in the decoration of the walls is their decoration with plinths. Today, foam products are widely used. You can glue a white plinth, but the painted part will look original and bright. The question of how to paint a polystyrene ceiling plinth remains relevant today. We propose to consider in more detail the process of choosing paint and the technology of work.

By purchasing ceiling fillets, consumers often do not think about painting them. Since the ceiling is made in white, why not leave the baseboards in the same range? This decision is somewhat wrong. Plinth painting is necessary, as it provides products with the following properties:

Often, skirting boards made of polyurethane foam have minor defects and dents, this is not a big deal, however, with bright lighting and light hitting the products at a certain angle, all scratches become visible.
Polyfoam is characterized by a low density, sometimes the products are translucent, and the paint will give them a solid and modern look.
When asked whether you need to paint the ceiling plinth, remember that white polyurethane foam is subject to fading in the sun, and also collects dust particles.
Painted parts are much easier to clean, for this you just need to wipe them with a damp cloth.
The main problem when gluing white fixtures is the visibility of the joints, while the paint allows you to hide these transitions.
Painting your styrofoam ceiling plinth will help create the right combination finishing wallpaper or paint with products.

In the video: whether it is necessary to paint the ceiling plinth made of polystyrene.

It is best to paint the product before sticking it on the wall. It is at this moment that the staining will be comprehensive, while on the wall it will be necessary to additionally protect the finish from paint.

Do styrofoam ceiling skirting boards need to be painted if they are already white? When deciding to leave original color painting is still necessary. You can also use white paint for this. This procedure will give the product additional strength and protection from external factors.

Types of paints

Knowing that the material of the ceiling plinth for painting is loose and has certain properties, never use a mixture based on white spirit or solvent for painting. It is easy to spoil the product with such a coloring composition. For work, use paints based on water-dispersed mixtures.

The peculiarity of applying such paint on polyurethane skirting boards is that solid polymer substances, which are in concentration in water, remain on the surface of the product, forming a dense layer of a film of a certain color. The water evaporates when it dries. In addition, when choosing how to paint a foam ceiling plinth, pay attention to the fire safety of the composition and its environmental friendliness.

Today the following types of paints are on sale:

Acrylic. Possesses excellent decorative qualities that are not lost even during many years of use. Painting the ceiling plinths with this mixture guarantees the consumer resistance to color fading, water resistance and vapor permeability. The product will "breathe", which is very important for rooms with high humidity.

Polyvinyl acetate paint for ceiling skirting boards. Great for dry rooms temperature regime and the absence of constant influence of moisture. It is necessary to use such paint only in corridors or other rooms that are not exposed to dampness. Polyvinyl acetate formulations are not water repellent.

Latex. These mixtures have proved to be excellent in wet rooms... The color of the baguettes forms a hard film that does not absorb water. In addition, products can be washed with detergents and a damp cloth. The only drawback of this paint is its ability to fade in the sun, so this mixture is perfect for a bathroom.

Choose a paint based on the purpose of the room in which the skirting board will be installed. Water-based mixtures are also good for coating polyurethane foam products, they have an affordable cost and good protective properties.

Preparatory stage of work

The procedure can be done by hand, thus saving money and independently performing simple decor manipulations.

The work does not require specialized skills and is carried out in a short time. Before painting your Styrofoam ceiling skirting board, select the type of paint and the product itself. In addition, it is necessary to carry out preparatory work on the surface and eliminate all visible defects. We propose to consider the procedure for preparing foam products for painting directly on the wall. First, prepare your tools:

container with water;
sponges;
gloves;
rubber spatula;
cloth for wiping hands.

In the video: how to decorate the ceiling plinth.

If your home doesn't have a suitable trowel, you can use a piece of cardboard or a small plastic spatula. Initially, it is necessary to paste over the ceilings with plinths. After that, a fine dispersion finishing putty is applied. It is taken with a finger or a spatula and the joints are carefully covered. Before painting the skirting board, it is also important to go over all visible holes between the wall and the ceiling decoration fixtures with a putty.

Be careful not to accidentally cover up the embossed pattern. To do this, fill in all the cracks with a thin layer and remove the remnants of the material with a sponge. The peculiarity of polyurethane products is that they are quite fragile and can break under the influence of force. Do not forget about this when filling the joints.

Advice! After the putty has completely dried, walk along the cornice sandpaper fine grain so that the adhesion of the surface to the paint is better.

Product dyeing technology

Depending on the sequence of work and on the moment at which it was decided to paint the foam baseboards, the painting method will also differ. We propose to consider 2 options for work. The first of them will occur in the case of coloring the products before gluing, and the second option involves painting directly on the established plane:

Free up space in your home for painting skirting boards. Cover the floor with paper or plastic to keep paint away from the finish. It is important that in this room there is no through wind or direct sunlight... If you bought a can of paint, start spraying it on the fillets at a distance of 30 cm from the fixture. If paint is used, take the composition on a brush and paint with light and smooth movements along the plinth. To answer the question: is it necessary to paint the ceiling plinth a second time, it is necessary to check how well the paint has laid down. If the first coat did not give the desired result, brush again, only after it is completely dry.
It is necessary to handle skirting boards that are already glued to the base differently. Use masking tape before painting your polyurethane skirting board. Stick it along the entire perimeter of the room to walls and ceilings. Don't be afraid to damage the finish, masking tape can be easily removed from any surface. After preparatory work using paint and a thin brush, paint the product along. You can remove the masking tape only after the coating is dry.

Drying will proceed faster if there is sufficient air circulation, but do not forget that the products should not be exposed to ultraviolet radiation.

During the staining process, make sure that the brush does not leave streaks or lint. The decor should remain the same, without flaws.

Tips for painting a ceiling plinth

In order for the staining process to occur correctly, it is important to heed the following advice from masters who have experience in this work:

Use a wide tape to protect the finish before painting the baseboard, this will help protect the wallpaper and ceiling more reliably.

Choose a quality textured or smooth foam ceiling skirting board. Whether it is necessary to paint the product after installation or before this procedure is up to the consumer.

Do not forget about caring for the product - the painted surface must be washed with a damp cloth as it gets dirty.

Work with dye formulations in special clothing and gloves, and also monitor the safety of the selected formulation.

Choose a product that is suitable for the style of the interior of the room. How to paint a ceiling plinth is now known from our article. Relief models are most suitable for classic interiors, and straight fillets without patterns will become appropriate in modern designs premises.

Absolutely not the last step repair can be considered painting the ceiling plinth, as practice has shown, this stage of work is best done before wallpapering, so as not to stain them.
It is necessary to paint the ceiling molding in order to hide the yellowed and darkened places of the plinth, as well as to give it any shade or color. For this we need to figure out how to paint and paint.
Why do we need to paint a baguette?

Foam or polyurethane baguettes available on store shelves building materials, mostly white. With a white ceiling, the question may arise: is there a need to paint the baseboard and how to paint a foam ceiling baseboard?
And we have an answer to this question.

Products made from such raw materials often have mechanical defects in the form of scratches and dents, which are especially visible in bright light.
Also, this type of material shines a little due to its loose structure, and painting will give it solidity and strength.
Unpainted skirting boards can darken and turn yellow over time and are difficult to clean compared to painted materials that can be easily wiped off with a damp cloth.
An important point is that without joints, the skirting board is almost impossible to glue, and the most visible ones will be in the corners. Therefore, before painting, all the joints are smeared, and after painting they are completely invisible.
And the last but not least fact in favor of painting will be that we have the ability to give the plinth the desired color.

Painted ceiling plinth

Preparatory work

Painting the ceiling plinth

Before starting the painting process, you need to fix all the defective spots, such as corners, joints and other defects. It is better to do it with a putty for finishing works or white silicone.
The preparatory work is carried out in several stages:

To begin with, we will find a container with water and a sponge, and to putty the joints, a rubber spatula or a piece of plastic plate.
Then put putty on the joint. rubber spatula- this is done along the seam. In this case, you need to firmly press the spatula to the baseboard, just not very hard.
Remove excess putty with a cloth or sponge.
Then cover the corners with your finger, if you do not want to hurt your fingers, it is better to wear a glove.
If there are gaps along the edges of the skirting board, they can also be greased.
After the skirting board dries, all defects are removed with fine sandpaper.

What time is best to paint

Ceiling plinth

Some experts advise painting on the floor. This option has two advantages; you do not need to climb, the step-ladder and the pasted wallpaper will remain clean.

If we decided to act with this method, then first of all we cut the parts of the required length, having previously adjusted the corners. We will seal and paint the joints after gluing the ceiling molding, only this must be done very carefully, since there remains the likelihood of paint getting on the wallpaper;
But still, most people paint after installation, and this method is much more complicated and naturally stronger. It should also be borne in mind that painting the ceiling plinth with the ceiling will be monochromatic and will close all the flaws if painted together.

Choosing paint

We paint the plinth with our own hands

An important point is the choice of a good paint. For foam and polyurethane ceiling products, it is absolutely impossible to use solvent paints, therefore you need to take water-based paint.

If you paint the ceiling molding on the ground, you can use spray paint, thus, the process will speed up and there will be no streaks;
If you need to paint the ceiling plinth in other shades or colors and this was not found ready-made, you can buy white paint and add color to it;
For more serious demands on the interior and the result of the final color of the skirting board, we recommend using glaze. What does glaze represent? This is a kind of toning, such as a stain, is applied by spraying from a spray bottle and rubbed with a sponge. Using glaze you can get different kinds textures.

Types of textures

Painting the ceiling plinth

It is not necessary to have construction skills for this type of painting. The main thing before work is to thoroughly remove dust from the baguette, and even better to treat it with a primer.

To obtain a platinum paint effect, experts advise using Tare glaze. The application is carried out equally, with the exception of the middle part, which remains unpainted. Then the edges of the applied stripes are gently smeared with a sponge and removed a little upper layer cover.
Using this technique, we will achieve a lighter effect for convex surfaces and add saturation to the deep parts of the baguette, then with a dark Humbert glazer we select the pattern of the ceiling plinth and the created effect;
To create a gilded effect, you must have a silver and gold glaze. We dip the brush into the toner, and then wipe it almost dry, paint over the convex part of the baguette with gold paint. Thus, you get the effect of worn gilding or silver;
Malachite effect - for this method we will use green glaze and a leather swab. First of all, a green glaze is applied with a swab, the effect of veins is obtained, then a slightly diluted glaze (for a lighter shade) is applied with a pen;
Aged Wood - A brown glazer and a hard-bristled brush are used to achieve this texture. This way you can make a texture similar to wood, and with a thin brush, you can add stripes in the form of fibers;
Dirty stone - To get this effect, you need to apply glaze to Taira and shade with a brush in order to get light stains. Then we apply small strokes with a dark shade. After the first layer has dried, it is necessary to apply additional strokes to the relief with a bronze glaze.

Installation and painting of ceiling plinth

There are several nuances in this business:

If you paint a ceiling molding that has not yet been installed, then for this case you can use a brush or a spray can of paint.
If you paint a ceiling baguette already glued on the wall, and the wallpaper is already glued, then in order to protect them you need to glue paper tape along the baguette line.
If we are worried that there is a possibility of harm to the wallpaper when peeling off the tape, then there is another way of painting. You can take a wide spatula or a sheet of paper and put it where we paint.
Having painted the ceiling baguette at one time, it needs to be allowed to dry a little. After everything is dry, we look at the result and we are satisfied with no defects, then our work is finished.

And if the joining points of the baguette are still visible, then the procedure can be done again.

Outcome

DIY ceiling plinth painting

After we learned how to apply paint to the ceiling plinth, then this work can be done independently and save money without hiring people to do this work. To receive good result you must adhere to the advice given in this description.

Visors and awnings. External and internal stairs. Components