A mirror fixed to the cabinet doors - convenient device allowing you to see your reflection in full growth. It is customary to fix the mirror surface to the cabinet so as not to litter the wall. A correctly placed product makes a room look cozy and effective. In order for the device to hold tightly, it is important to know the features of the mirror mounting. We will talk about this now.

How to choose materials for gluing a mirror

When planning to stick the mirror surface on the cabinet doors, focus on the material covered with a special protective film. Moreover, this
the film should be on the back of the product. It is not scary to use such a product - even if, over time, the surface detaches and breaks, it will not scatter into small fragments that are dangerous to households. And all because the probability of injury is minimized by the reinforced film.

• double-sided tape - has adhesive tape on 2 sides (with its help it is possible to fix small products);
• silicone composition - firmly holds the plane even in extreme heat, allows you to attach large devices.

Some people use liquid nails and Moment glue to stick a mirror surface on cabinet doors. But remember that the adhesive composition is noticeable unpleasant odor... Liquid nails, in turn, are saturated with components that harm the almagam.

Step-by-step instructions for sticking a mirror with tape

If you have chosen the option of fixing the mirror to the cabinet doors using double-sided tape, only by adhering to a sequential algorithm of work, you will be able to achieve the desired result:

1. Grasp the end of the tape from the reel, pull on it and cut to the required length to glue part of the surface.
2. Gently holding the tape, apply it to the product, level the adhesive material gradually.
3. Measure and cut off additional pieces of tape and fill in the gaps on the back of the mirror plane.
4. Set the garment aside, placing it on the front side.
5. Decide where the mirror will be located. Measure out the borders with a pencil.
6. With the help of a friend, lift the mirror and put it on the tape to the cabinet doors, focusing on the drawing you made.
7. You can firmly press the surface by making sure that the fixture is located correctly.

How to use silicone correctly

Working with silicone requires preparatory phase and in general the process takes longer. But the lifespan of the mirror compared to the previous one method increases 2 times. How should you proceed?

1. Carefully remove the cabinet door from its hinges and place it on a flat, horizontal surface, be it a floor or a large table.
2. Make markings on the door according to the size of the mirror. Mark where exactly it should be located.
3. In order for the silicone to firmly fix the material, lubricate the door surface with solvent. It will degrease the surface. A piece of textiles will help. The fabric does not leave behind sticky fibers and threads.
4. Take a short break from work, wait for the degreasing compound to evaporate.
5. Take a silicone-based glue, the manufacturer must indicate the purpose on the packaging - it is used in construction. It is better if the glue is colorless. When excess drops solidify, the oversight will not be as noticeable.
6. Spread the adhesive on the back of the mirror evenly. It is unacceptable that the composition gets on the front side or clothes. The surface is smeared not with a continuous layer, but with stripes at intervals of the same length.
7. Select the longest edge of the mirror surface as a guide. Slowly press the product against the cabinet door. You will need the help of another person. While one applies, the other monitors the alignment of the markings and mirror outlines.
8. The composition dries up when the door is in a horizontal position. Wait a few hours and put the sash back on its hinges. If you are in doubt whether the product was placed correctly or not, until the silicone has completely solidified, you can move the surface to the required distance.

Why do we need metal legs and stops

If you are afraid that the mirror will fall, it can be fixed to the door using metal tabs or plastic stops. Again, the door is first removed and laid horizontally. The paws are checked for depth, because they have to hold the mirror tightly. If the height is too high, place padding under the feet.

The paws are screwed in with a reference point to the markings made. Place the mirror first, then press down on the legs.

Alternative mounting option

Experienced furniture makers call the surface landing on decorative hangings made of metal as an alternative and reliable option for attaching a mirror to a cabinet door. How do you work with them?

1. Make 4 holes 6 mm in diameter in the mirror plane. Drilling can be done using arrow drills for ceramics.
2. Make sure that the suspension bracket is not visible behind the mirror.
3. We'll have to damage the surface of the cabinet, and this is the main disadvantage.

There are several ways to attach a mirror to furniture. This can be a small wall cabinet door or a massive wardrobe door.

The most common ways are:

• on double-sided tape,
• using plastic stops or metal U-shaped legs,
• on silicone,
• with screws.

We advise you to purchase mirrors reinforced on the back of a special protective film, which prevents sprinkling of debris. Such a mirror is much stronger and safer: its fragments will not sprinkle if the mirror is broken.

How to glue a mirror on double sided tape? First, tape the tape around the back of the mirror. Then apply additional vertical strips of tape at regular intervals. Before gluing the mirror, mark with a pencil the borders where the mirror will hang on the door. After that, the mirror can be glued.

On double-sided tape, no matter how convenient it is, never glue large mirrors! The tape may come off and the mirror will fall. This probability increases especially in the hot season.

The second way is with special metal U-shaped legs or plastic stops... The mirror must be attached to the door, which has been removed from its hinges and is in a horizontal position. When using the presser feet, check that they are accurate in height. The height of the legs should be such that they fit snugly against the glass. In this case, there should be no tension. If necessary, install spacers under the legs. When you mark the holes for attaching the legs, screw on the legs, then bend them, insert a soft underlay into the mirror. Then you need to squeeze the mirror with your paws.

The most convenient and durable way to attach a mirror is to glue it with silicone... Let's consider in detail how to do this.

Mark lines on the furniture door where the mirror will be.

The reverse side of the mirror and the surface where you will glue it, wipe it with solvent for degreasing. It is advisable to do this with a rag that does not leave behind fibers and threads. Allow the solvent to evaporate completely before applying the adhesives.

Colorless construction silicone is the most the best option for gluing a mirror.

Apply silicone to the back of the mirror carefully so as not to hit the front or clothing. Do this in strips at regular intervals. There is no need to apply silicone to the entire surface. As well as applying copious strips of silicone close to the edge.

Then you need to set the longest mirror edge to the line that you previously marked with a pencil. With the utmost care, lower the mirror so that there is no displacement relative to the marking lines. It is easier for two people to do this: one smoothly lowers the mirror, and the other controls that the mirror is glued exactly along the marking lines.

Allow the silicone to dry before hanging the door back. Two hours are enough for this.

And the least popular way to mount a mirror is with screws... To do this, you need to drill holes in the corners of the mirror using diamond drills. During drilling, the surface of the mirror must be constantly wetted, and a layer of soft cardboard or soft cloth must be placed under the mirror. It is advisable to insert plastic washers under the screw heads.

On and inside cabinets have been very popular for many years.

You can order modern wardrobes with mirrored doors or make them yourself, which will help you save or upgrade old furniture, giving it a modern and practical look.

Consider all possible options how to attach a mirror to a wardrobe.

Modern construction gives wide range selection of materials for attaching mirrors to furniture. It can be mounted both from the inside and from the outside of doors or side panels of furniture.

It can be mounted on screws, special fasteners, liquid adhesives or assembly tape. All methods are good and the choice remains solely with the owner.

• Construction tape. Double-sided mounting tape can be used for small and thin mirrors, otherwise items that are too bulky may fall off. This method is considered the simplest and most popular among modern furniture makers. When choosing an adhesive tape, you need to pay attention to the level of fixation, since as a result, the mirror should be kept even, motionless and secure. Scotch tape has several advantages:
  withstands temperature drops from -40 to +80; the foam base remains elastic for many years; resistant to sunlight and excessive moisture. Scotch tape provides full fixation after application, however, it should take 24 hours for complete fixation. Everyone can glue the mirror to the tape - it's simple.
• Liquid Nails. I would like to note right away that it is better not to practice liquid nails on new furniture. They are divided into two types: neopreon (rubber) can damage the back of the mirror, so they are practically not used for this purpose; acrylic nails that are safe, environmentally friendly and free from a pungent odor. Such compounds can be used for furniture and mirrors.
  Liquid nails are afraid of moisture, so they are not recommended for the bathroom. They are used mainly for a bedroom, a corridor or a living room; the material must be applied to the entire surface of the mirror with a dot or a snake. It should be noted that it is necessary to qualitatively coat the edges around the perimeter, but not with a very dense layer, so that the composition does not crawl out of the borders when gluing.
• except liquid nails you can use silicone. It is more gentle in composition and there is no claim to spoil the amalgam. Also, acrylic is hypoallergenic and quick-drying, unlike nails. On the cleaned back side of the mirror, the composition is carefully applied in stripes or currents. It is not necessary to apply a layer that is too greasy so that the silicone does not drip and get on outer surface... Then the mirror is applied with its long part to the markings and gently pressed over the entire surface.
• Hardware and fasteners. Most often, mirrors are mounted on plastic supports, which can be purchased at any hardware store or U-shaped metal legs. They can only be used when it is possible to remove the door from the hinges. Before drilling the door, it is important to accurately mark the points of attachment of the legs, since they must fit tightly and tightly against the mirror so that it does not fall out during operation. Unlike the wall, the cabinet doors open constantly and this puts additional stress on the mirror.
• Sometimes screws are used for fastening. This is not the most common method, but sometimes it is used for this you need diamond drills to make holes in the mirror. The same holes must be made on the door, and then the mirror must be attached with screws. This method is considered the most effective, but not everyone is able to "painlessly" drill a mirror or even mark the places for fasteners.

It is important to remember that the closet can be cleaned from the scotch tape and the mirror can be removed if desired, there is nowhere to go into the holes from the fasteners, so you need to think carefully before drilling the closet.

How to attach a mirror with your own hands

Attaching a mirror is not difficult, the main thing is to prepare everything in advance and adhere to the algorithm of actions:

• The first step is to prepare all the materials for work so that they are at hand. You need a level, a ruler, marker or pencil, fasteners, tape or glue. Clean, lint-free rags will come in handy to firmly attach the mirror over the entire surface and remove excess. If it will be mounted on hardware or "paws", then a drill and all the necessary tools are prepared in advance.
• After preparing all materials and tools, it is necessary to degrease both surfaces - both the mirror and the cabinet. The best way to do this is to use rubbing alcohol. You can start working after both sides are completely dry.
• When installed, holes are made on the door and legs are attached. Then they bend or open, depending on the models, and a mirror is inserted inside, which is then tightly settled with fasteners. If, for some reason, it is a little loose, then small rubber pads can be installed under the feet, which will not be noticeable at the end of the work.

When all materials are prepared, and the surfaces are degreased and dried, you can proceed:

• The first step is to mark up with a pencil, chalk or marker. It is important to note everything clearly and evenly, otherwise it will not work to re-glue the mirror or remake the fasteners.
• If the fasteners are made with hardware or "paws", then it is best to use diamond drills to drill the holes so as not to damage the surface.
• If liquid glue is used, it is not applied to, but to the back of the mirror. Then they are tightly pressed against the cabinet door and held. So that the composition "grabbed" a little.
• When using scotch tape, the surface of the cabinet is qualitatively pasted over according to the outlined drawing and then a mirror is leaned against it for complete fixation.

The sequence of actions is the same regardless of the type of fastener. If it is possible to remove the cabinet doors, then this must be done in order to facilitate the fastening process, especially if a liquid composition is chosen as the main material - acrylic or nails. You need to hang the door back two days after it dries completely.

To make the mirror look relevant and serve for many years, it is recommended to heed the advice of experts:

• Before attaching to tape or liquid composition, the surface must first be degreased with alcohol. This will significantly improve the quality of adhesion between materials.
• Hang the mirror perfectly straight. So that it does not distort the image.
• Before buying a mirror, it is important to make sure it is painted vertically, otherwise the image will be slightly stretched to the sides.
• If the mirror surface will be mounted on outside, then it is better to rearrange it so that straight lines do not fall on it Sun rays otherwise the mirror will fade and become stained over time.
• Oval mirrors visually enlarge the premises.
• It is not recommended to hang a full-length mirror in the bedroom if the wardrobe is opposite the bed;
  when choosing glue or liquid nails, you need to pay attention to it performance characteristics;
  it is recommended to apply a primer under the adhesive (silicone, nails) to increase adhesion;
  when choosing an adhesive, you need to pay attention to the composition. Some chemical substances can ruin the surface of the cabinet or "corrode" the amalgam of the mirror.

So, it can be noted that fastening a mirror to a cabinet door is a simple process and anyone can handle it. The main thing is to first choose the right mirror and material for fastening. It is also important to measure and mark seven times so that the mirror hangs perfectly evenly, and then make fasteners.

We fix the mirrors securely - on the video:

We attach the mirror to the furniture

There are several ways to attach a mirror to furniture. This can be a small wall cabinet door or a massive wardrobe door.

The most common ways are:

• on double-sided tape,
• using plastic stops or metal U-shaped legs,
• on silicone,
• with screws.

We advise you to purchase mirrors reinforced on the back with a special protective film that prevents splinters from sprinkling. Such a mirror is much stronger and safer: its fragments will not sprinkle if the mirror is broken.

How to glue a mirror onto double-sided tape.

First, tape the tape around the back of the mirror. Then apply additional vertical strips of tape at regular intervals. Before gluing the mirror, mark with a pencil the borders where the mirror will hang on the door. After that, the mirror can be glued.

On double-sided tape, no matter how convenient it is, never glue large mirrors! The tape may come off and the mirror will fall. This probability increases especially in the hot season.

The second method is with the help of special metal U-shaped legs or plastic stops. The mirror must be attached to the door, which has been removed from its hinges and is in a horizontal position. When using the presser feet, check that they are accurate in height. The height of the legs should be such that they fit snugly against the glass. In this case, there should be no tension. If necessary, install spacers under the legs. When you mark the holes for attaching the legs, screw on the legs, then bend them, insert a soft underlay into the mirror. Then you need to squeeze the mirror with your paws.

The most convenient and durable way to attach the mirror is to glue it with silicone. Let's consider in detail how to do this.

Mark lines on the furniture door where the mirror will be.

The reverse side of the mirror and the surface where you will glue it, wipe it with solvent for degreasing. It is advisable to do this with a rag that does not leave behind fibers and threads. Allow the solvent to evaporate completely before applying the adhesives.

Colorless construction silicone is the best option for gluing mirrors.

Apply silicone to the back of the mirror carefully so as not to hit the front or clothing. Do this in strips at regular intervals. There is no need to apply silicone to the entire surface. As well as applying copious strips of silicone close to the edge.

Then you need to set the longest mirror edge to the line that you previously marked with a pencil. With the utmost care, lower the mirror so that there is no displacement relative to the marking lines. It is easier for two people to do this: one smoothly lowers the mirror, and the other controls that the mirror is glued exactly along the marking lines.

Allow the silicone to dry before hanging the door back. Two hours are enough for this.

And the least popular way to mount a mirror is with screws. To do this, you need to drill holes in the corners of the mirror using diamond drills. During drilling, the surface of the mirror must be constantly wetted, and a layer of soft cardboard or soft cloth must be placed under the mirror. It is advisable to insert plastic washers under the screw heads.

More materials related to the topic

Previously, the use of mirrors in furniture was mostly practical.

So, the mirror could most often be seen in cabinets or

Any mirror hanging on the wall or built into furniture can be made unique with a little effort, imagination and using simple

http://street-mebel.ru

Most often, when decorating the interior, mirrors are hung on a wall in a frame. However, if for some reason this option does not suit you (say, the frame does not fit into the intended interior design), the mirror can be glued directly to the surface of the wall or furniture. Let's talk about how to glue a mirror.

You can glue the mirror to almost any surface. But, of course, before that it is necessary to prepare it. The surface must be flat, and the larger the area of ​​the mirror, the more carefully you need to level the surface.

If you glue a mirror on concrete wall, it is necessary degrease and prime with deep impregnation soil... Ceramic tiles and drywall must be dust-free and degreased before gluing the mirror. Dyed oil paint the wall is also dedusted and degreased if the paint has not started to peel off. If there are defects on the paint layer, you will have to remove it.

The back surface of the mirror must also be free of dust. Do not use aggressive agents for cleaning and degreasing. as they can damage the amalgam. If necessary, before gluing, cut the mirror to the right size we advise you to entrust this procedure to professionals. They will not only be able to cut the mirror so that it does not crack, but they will also correctly process the edges of the canvas.

It is best to purchase a mirror for mounting a mirror special glue for mirrors, an alternative can be a neutral sealant or "liquid nails", but special glue is still preferable. Do not use adhesives with solvents to glue mirrors - they can damage the mirror amalgam. It is also not recommended to glue mirrors. tile adhesive and cement-lime mortar. For small mirrors, you can use a special double-sided foam-backed mirror tape.

The most convenient use a combination of glue and tape to glue the mirror: Thanks to the tape, the mirror will stick to the wall until the glue takes hold. First, vertical strips of adhesive tape are glued to the amalgam at some distance from each other, and glue is applied between them. Then the protective tape is removed from the tape and the mirror is gently but firmly pressed against the wall using special suction cups for installing mirrors.

If you are gluing a bathroom mirror, you may need to "fit" it into ceramic tiles so that the mirror surface is flush with the tile. In this case, it is especially important to carefully calculate the size of the mirror. The edges of the mirror sheet must not touch the tiles otherwise the mirror may crack over time. There should be a distance of 4-5 mm between the edges of the mirror and the tile, which, after the mirror glue has dried, is filled with acrylic sealant.

The sealant can be applied about a week after the mirror has been glued, when the glue is completely dry. Before applying the sealant, you need to clean the joint cavity from dust and make sure that it is completely dry. Through assembly gun apply sealant along the contour of the mirror with a certain margin (excess sealant can then be removed from the surface of the mirror and tile with a wet rag).

In the event that you need glue the mirror to the furniture(say, on the cabinet door), you can get by with one scotch tape.

How to glue the mirror to the cabinet door yourself

First, tape the perimeter of the tape to the back of the mirror, then tape vertical strips of tape at regular intervals. After that, carefully glue the mirror, focusing on the pencil marks made in advance.

When mounting mirrors with a very large area, the adhesive alone may not be enough for a secure attachment. In this case the mirror sheet is additionally fixed with bolts... First, with special tools, holes of the required diameter are drilled in the mirror, and then the wall is drilled out with a puncher in the appropriate places. After gluing, bolts are screwed into the holes.

Mounting the mirror is most convenient for two people.... We advise you to do installation work with gloves - even with a carefully processed edge of the mirror, there is a chance of cutting yourself.

How to glue the mirror to the wall yourself?

How to attach a mirror to a wardrobe: what are the ways?

I bought a new mirror for the closet, but I don’t know how to attach it now. Tell me how to mount?

Mounting is possible either on special Mirror- (glass-) holders. There are quite a few a large number of, differing in size, texture, fastening methods, etc.

They all have one common drawback: they are visible, that is, the fasteners protrude from the mirror. But at the same time, the mirror can be dismantled and removed at any time. Only small holes from the screws will remain, which can be covered with furniture wax.

There is also a second way of fixing - gluing. The method of gluing on silicone is quite popular among furniture makers:

We remove the door on which you are going to stick the mirror, degrease it. We do the same with the mirror itself.

Apply silicone to the back of the mirror (in stripes)

We put the mirror on the facade, level it in place and put the oppression for a day. After 24 hours - you want it, but you won't be able to tear it off)))

The method has two disadvantages: the duration of the work and the impossibility of dismantling.

I myself tried to glue it on liquid nails (2 years - the flight is normal, but there is an opinion that the ammonia contained in this glue destroys the amalgam - I haven't noticed it yet, but I don't do it anymore - just in case ...

Choose the method that you like best and go ahead!

In the article I will describe in detail how to glue the mirror to the cabinet door myself. I will give detailed instructions each stage of work. I will list the necessary expendable materials and tool. I will pay special attention to the process of fixing the mirror sheet. Let me explain what types of mirror attachment to the door are.

How to glue the mirror to the cabinet door yourself

Consider one of the most reliable and simple ways fasteners to the cabinet door using silicone.

Required materials and tools

The key to successful work is the use of exclusively quality materials... First of all, you need to purchase a special silicone for mirrors and glass in a hardware store.

If the store offered you liquid nails marked "for mirrors", you can safely use them.

Next, we need a composition for degreasing the surface. You can use white alcohol or another universal solvent. And of course, buy a mirror of the right size or order one from a glass workshop.

Be sure to degrease the surface before applying the adhesive.

From tools come in handy:

tape measure or large ruler;

Fastening process

Let's get down to work:

1. 1. First of all, it is recommended to start preparing the workplace. It is better to lay the door on some kind of flooring so as not to worry about the surface of the floor or table on which the work will be performed.
   2. Draw on the door using a template correct placement mirrors. If you stick it unevenly, it will ruin appearance cabinet.

The markings should be as accurate as possible, otherwise the canvas will stick unevenly.

1. 1. Let's proceed to degreasing the surface: to do this, wet the rags with a special solvent and apply it to both surfaces, which will be held together in the future. Moreover, when working with a mirror, you need to be extremely careful so as not to damage it. To do this, it is recommended to spread a blanket and only put our blank on it. And then start processing back side glass with a degreaser.
   2. Insert a tube with silicone into the gun, cut off its edge and you can start applying the product to the surface. It is better to do this in a zigzag manner with a step of no more than 10 cm.

Offset from the edges of about 3 cm.

If you see a slight offset or deviation from the markup, you can still fix everything right away. With a slight movement, while the silicone has not yet hardened, you can move the sheet. After a while, this can no longer be done.

Types of mounting a mirror to a door

There are several types of attachment to the cabinet door:

You can stick a compartment to the wardrobe door without having any experience in this matter, and with the help of improvised means. The minimum amount of materials that can be purchased at any hardware store and a standard tool are all you need to install and secure. And most importantly, our instruction with step by step description each stage of work.