How to properly paste over an arch with wallpaper in an apartment: a step-by-step description and ideas. How to paste over an arch with wallpaper: the choice of wallpaper, technology, design How to properly glue wallpaper on an arch

Arches different forms, sizes and configurations are becoming an increasingly popular design element modern interior... Earlier I already told you how to make this structure, and today I will tell you how to properly paste over it with wallpaper.

The difficulty of pasting the arch is that the curved surface articulates with a flat one. This leads to:

Difficulties in joining the picture;
Difficulties in performing a neat seam along the contour of the structure.

Let's consider both questions in order.

How to join a drawing on an arch?

For easy pasting, it is usually recommended to either choose wallpaper without a pattern, or with a small complex decor, that is, those on which the joint will be invisible without any effort on our part. The second option is to stick on interior arches and other wallpapers are monochromatic, in harmony with the main pattern.

For striped wallpapers and wallpapers with a longitudinal pattern: glue on the inner side a strip cut along the pattern so that the pattern on it is more or less symmetrical (for striped wallpapers - a whole strip in the center, for patterned ones - so that the center of the applets is in the middle). Of course, the joint is visible in this case, but, done neatly, it looks like an original design solution.

You can make a neat joint using a decorative arched corner. Read below how to do this.

How to paste over the arch with wallpaper?

The beautiful pasting of the arch with wallpaper implies their neat joint along its contour. How do I get it?

Thin paper wallpaper(see "") first glue on the wall with an arched opening. We trim them in the opening so that there is a margin of 2.5 ÷ 3 cm for the hem. We cut the "extra" wallpaper, fold it over to the inner edge of the arch and glue it. Then carefully glue the prepared strip. In this case, its width is 2 ÷ 3 mm narrower than the width of the inner face. Glue the strip from bottom to top to the middle of the arch, then bring it to the bottom of the second edge.

At the stage of preparation for pasting, paint the corners of the arch (where there will be a joint) to match the wallpaper (in case the corner is visible at the joint).
Wallpaper on the wall with a margin of 2.5 ÷ 3 cm
We cut out and glue the inner strip so that a margin of 2.5 ÷ 3 cm remains on both sides.
Leave the glue to dry completely
Then, with a sharp painting knife, cut off the excess panels. If at the stage you installed a metal arched corner, it will be very easy to do this, since there will be a solid, perfectly flat base from below. V otherwise it will take a little more skill and accuracy.
If your arch is not an opening, but a niche in the wall, then the joint of the back and side walls is made slightly differently. For details on how to do it, see the link.
We glue the corner again so that the wallpaper does not come off. Can be fixed with masking tape.
Remove the tape, if you can see a white paper cut, tint it with a pencil to match (see how to hide the wallpaper joints).
If wallpaper is used for painting, then the corners of the structure are not painted at the preparatory stage, and after the final cutting and gluing, the joint is sealed with a special acrylic sealant... Then the wallpaper along with the arch.

In principle, in both the first and second cases (except for sealing with a sealant for painting), even a neat joint will be visible from a close distance. Therefore, I recommend decorating it with a plastic arched corner. (Not to be confused with a plaster arched corner - it is metal and put into plaster or putty (in the case of gypsum plasterboard and gypsum plasterboard) before finishing).

The decorative arched corner differs from the usual plastic one in that it has shelves different widths... This is to increase its flexibility. There are corners of 20x10 and 20x5 mm, the standard length is 2.7 m. Accordingly, the smaller the radius of curvature, the narrower the smaller shelf should be. The wide shelf is located on inside arches, narrow - along the wall. The plastic corner can be glued to liquid nails or silicone adhesives (for example, "Titanium"). Apply glue to it along its entire length (you can use a "snake" on a wide shelf) and press it in place. You may need to hold it until the glue sets. Then fix it with masking tape and leave it to dry completely. Remove the tape and cut off the excess glue with a sharp knife.

A decorative corner will not only hide an inaccurate joint, but also give our arch a finished look, delimit the pattern on the wall and on the inner edge.

Well, I hope the information turned out to be useful to the question "How to paste over the arch with wallpaper?" you already know the answer.

Bamboo - unique material which is widely used for interior decoration premises. In addition to cladding walls and other surfaces, it is also used for cladding arched openings or constructing an all-bamboo arch in an oriental-style room.

Types of structures

This is a fragile and lightweight material, therefore, an independent partition made of it has exclusively decorative functions. Such arches in the apartment are used for space zoning. They do not impede the flow of light, do not burden the room and allow you to separate zones of different functions.

If a more solid structure is required, use a traditional arch, the base of which is made of plasterboard, wood and revetted it with halves of bamboo or roll material in the form of wallpaper made of natural plant fibers.

Features of bamboo as a material for arch decoration

The raw material for wallpaper made of this material is natural bamboo trunks, split into separate lamellas with a thickness of 4 mm to 100 mm. These pressed strips are glued to fabric or rice paper.

For processing and making wallpaper, the inner and outer parts of the bamboo trunk are used. The material obtained from the outside is distinguished by a wide variety of colors. it is characterized by chocolate, greenish, pistachio, vanilla shades, as well as wenge and tortoiseshell, obtained by firing lamellas;

Wallpaper that uses the bamboo lining is smoother, color-aligned. For greater resistance to UV rays, they are varnished or tinted.

Bamboo has a number of important features:

ecological cleanliness. it natural material, does not emit toxic substances when heated, in direct sunlight.
What kind of wallpaper can be pasted over an arch in an apartment?

It can be used to decorate rooms with special safety requirements: bedrooms, children's rooms;
durability. Bamboo canvas and individual trunks (whole or half) are resistant to moisture, temperature fluctuations, do not fade and practically do not fade in the sun;
simple installation. A ready-made arched opening made of plasterboard or wood - good foundation for decorating with bamboo. Wallpaper is glued using special adhesives... maintenance of such a surface consists in removing dirt with a damp sponge or with a vacuum cleaner. If lamellas or whole bamboo are used for decoration, they are first mounted on a crate, which is then attached to the arch. At the same time, the material is carefully selected, the elements of which must be measured and cut to the shape of the arch.

Bamboo arches are used in oriental interiors.

They are interesting and add completeness and beauty to the room.

How to paste over an arch with wallpaper.

He writes a lot about how to glue wallpaper on walls or on the ceiling, but how to paste over an arch with wallpaper, there are few places where you can find. Therefore, I decided to tell you in this article how to do it. There are several methods of wallpapering an arch. We will talk about all these methods now.

Sticking wallpaper on the arch. Method 1.

This is how our scheme for gluing wallpaper on the arch will look like. We glue the wallpaper canvases on the wall so that they go over the arched opening.

Without waiting for the wallpaper to dry immediately, we cut off the canvas from the back so that it fits into the arched opening by about 5 cm.Then we glue another canvas and cut it off and so on until we glue the entire arch around.

After that, on the canvas that goes into the arched opening, we make many cuts with a mounting knife or scissors.

An arch pasted over with wallpaper: how to glue it?

And we bend the edges to the inside of the arch. But for better adhesion, brush the wallpaper glue again onto the canvas.

Then we glue the wallpaper on the inside of the arch. To do this, the blade is cut 10cm wider and longer than it should be. After gluing, cut off the excess.

There are two major drawbacks to this method. One of them is that the canvas that is glued to the inside of the arch will constantly peel off. It will peel off not because he wants to, but because the edges of the canvas will constantly touch.

Another disadvantage is that when the web lies on the second, a bulge is formed. Many people do not pay attention to this, but there are people who wish that they did not have this. Then, in this case, read how to paste over the arch in other ways.

Decorating the arch with wallpaper. Method 2.

The second method is to trim the wallpaper at the corners of the arch so that the arched painting corner is visible. This is a corner that is glued to the arch during the puttying process. Here is a photo:

In this method, you must first glue the wallpaper onto inner surface arches and trim excess. Then the canvases are glued to the outer part of the arch, and again the excess is cut off.

You need to cut off without a margin, and so that the canvas repeats the exact shape of the arch. To make the arched corner better visible, sand the edges of the wallpaper with sanding paper. And this is what you should get:

It is also not a bad method for wallpapering an arch, but it is rarely used. After that, the white corner can be painted in any color.

Finishing the corners of the arch with a plastic flexible corner. Method 3.

Now I will tell you about the simplest and most reliable method of pasting an arch with wallpaper. It consists in glueing the wallpaper on the inside of the arch and cutting off the excess. And glue the wallpaper with outside arches. Then this one is not very beautiful corner a plastic flexible arched corner is glued. This is not the one that goes under the putty, but the special one. You can buy it at many major home improvement stores.

Thus, the corner of the arch will look good in you, and you will protect the wallpaper from mechanical damage. The corners will not be damaged or peeled off. And you will make your job much easier.

All these methods of wallpapering the arch have their own advantages and disadvantages. How to decorate your arch is up to you.

How to glue the wallpaper on the arch: what are the nuances?

We are doing repairs, we decided to glue the wallpaper on our own.

Pasting the arch with wallpaper

There is some experience, but the presence of an arch confuses. How to glue the wallpaper on the arch so that it looks beautiful and neat? Are there any nuances in the work, which wallpaper is better to choose?

Before you start working on wallpapering the arches, you need to decide what kind of wallpaper is best to buy.

Most likely, you will want to paste over the same wallpaper from the walls and the arch, therefore we buy wallpaper without a pattern (without a clear combination), you yourself understand why, the wallpaper on the arch is already difficult to join, and it is practically impossible to get into a drawing with a large step.

Therefore, we buy wallpaper with some kind of abstract pattern that does not require combination.

As for the type of wallpaper, vinyl, non-woven and glass wallpaper are also suitable.

There are several options for pasting wallpaper, I like the combined one most of all. In other words, the arch is pasted over with wallpaper, we glue the arched corner in front of the wallpaper, and the inner surface of the arch is left for painting, it looks beautiful and original.

The second option is to paste over the entire arch with wallpaper (it is also not a bad option, but I am not a supporter of gluing wallpaper on an arch without a decorative corner, it is absolutely impossible to glue the corner on top of the wallpaper).

We proceed to pasting the arch: Take a tape measure in our hands and calculate the width of the sheets from the corner of the wall on which the arch is located, so that the sheet closest to the arch does not turn out to be too narrow in width, that is, the more overlap on the arch, the better (from the opposite side of the arch do the same).

The canvas that overlaps the arch, with glue as usual, then we take very sharp scissors and cut off the excess part of the sheet, leaving three centimeters to overlap the arch.

A strip wrapped around an arch

often cut (approximately two centimeters), these cuts will facilitate gluing the strip to the arch.

When the same work is done on the opposite side, it will be possible to start pasting wallpaper on the inner surface of the arch.

Cut off the wallpaper to the width of the opening, but a little narrower, by three millimeters (this is so that the edges of the wallpaper do not protrude beyond the width of the arch).

It is better to use two strips, it is more convenient and prettier to join the strips in the center under the arch.

Yet important point... Insert strip, it is more convenient to glue from bottom to top,

and not vice versa.

That is, in general, all, it cannot be said that the work is extremely difficult, rather painstaking, yes.

How to paste over the arch with wallpaper

If your house has an arched opening, then it certainly immediately attracts the attention of guests. However, when cosmetic repair an arch can become a significant difficulty, because not everyone knows how to paste over an arch with wallpaper in order to get a really decent result.

The edges of the arched opening can be protected from damage and wear by gluing them with flexible plastic corner.

Finishing options

Arched structures create a special style in the interior, which changes depending on the decoration. You can decorate the arch with wood, plaster, acrylic mirrors and wallpaper.

The last option is distinguished not only by the most low price, but also the ability to create truly original interior... In addition, this finish can be changed very often.

Despite the fact that pasting the arch with wallpaper seems to be a fairly simple procedure, certain rules should be followed when performing it in order for the final result to meet all your expectations.

Wallpaper selection

The choice of wallpaper should be taken seriously, because arched shape makes it impossible to match the pattern on the front and side. Therefore, in the event that you want to decorate the entire arch with the same wallpaper, then they should be chosen monochromatic or with a small or abstract pattern applied that does not require combination.

Advice! The choice of wallpaper will be greatly simplified if the inner surface of the opening is pasted over with color-compatible wallpaper or if it is opened with paint. In this case, any pattern can be on the main wall, but it is better to make the inner surface monochromatic.

Today, companion wallpapers are very popular, which have a common background, but a different pattern. it perfect solution for finishing arched openings.

For example, you paste over the outer wall with patterned wallpaper, and trim the opening itself with striped or plain wallpaper. Thus, stylish contrasts are created.

When choosing companion wallpaper, think in advance how you will combine them, and how you will cover their joints.

It is also possible to use photomurals for the arch. But in some cases, the price of such a repair is very high, since the wallpaper has to be made to order, taking into account the size of a particular arch.

Also, attention should be paid to the quality of the selected wallpaper.

If the opening between the rooms is in the form of an arch, then this zone is always subjected to a rather heavy load.

The coating must necessarily be washable and resistant to mechanical stress, since it will be corny to burst, and therefore it is necessary to periodically wash the walls in this area.

For this reason, paper wallpapers will not be here. the best solution... It is much better to choose vinyl, non-woven, bamboo or glass wallpaper, which can be wiped clean from time to time using a mild soapy solution and a sponge.

Preparation for work

It is impossible to glue the arched opening on drywall, you must first apply a layer of plaster to hide the fasteners.

Before gluing the wallpaper on the arch, you need to prepare some tools that will be useful to you in your work, namely:

Wallpaper glue.
Pencil and ruler.
Scissors.
Brush.
Wallpaper.

Work begins with the preparation of glue. It must be prepared thicker than for wallpapering the walls. This is done in order to ensure that it dries more slowly and so that the glue does not set in droplets.

Also, a thicker consistency will allow the wallpaper strip to move freely along the wall, achieving a complete coincidence of the pattern, if required.

Getting started gluing

Schematic representation of the order of work.

Now let's look at how to properly wallpaper the arch with our own hands.

A simple instruction will help you with this:

First, you should calculate the stacking of sheets in such a way that the last whole sheet in front of the arch is at a distance of 20-25 cm from the arched opening.
Glue the next canvas... In no case, do not cut the canvas to fit the shape of the opening in advance. It is highly unlikely that you will be able to calculate everything accurately. Plus it will take a long time.
Taking sharp scissors, cut off the part of the canvas that extends beyond the opening, but not along the contour, but retreating about 2.5 cm.
Along this indent, at a distance of every 3 cm, make cuts located perpendicular to the opening line.
The resulting tongues must be wrapped inward and glued to the inside of the arch.

We paste over the facade of the arch, bending the resulting tongues inward.

In the same way, we paste over the top and the second side of the arch.(three sheets will be enough for a standard arched opening).
Now you need to measure the depth of the arched opening (the width of the inner side) and the length of the arch itself from one bottom point to another.
According to these dimensions, cut a strip of the required length, but at the same time its width must be made a few millimeters less.

Note! In the event that the arch is very long, it is more convenient to paste over its inner surface with two strips of wallpaper, converging at the top point.

Having smeared the strip with glue, we glue it from bottom to top around the entire opening.

In the photo, pasting the inner arched surface.

Here you need to take into account the following: since it will be very problematic to bend the edges of modern textured wallpaper inward, the material for the arch should be chosen rather thin, but at the same time very durable.

Conclusion

In general, the process of wallpapering an arched opening with wallpaper is simple, you just need to know the technology. Decorating an arch with wallpaper is now quite common due to the high cost of finishing materials. But, nevertheless, by showing imagination, you can achieve an original result that will look no worse than wood trim, for example. You can find out more useful information from the video in this article.

How to paste over an arch with wallpaper - technology and design

If your house has an arched doorway or niche, they look very beautiful. But during the next cosmetic repairs, you will surely face the question of how to paste over the arch with wallpaper so that it looks spectacular and neat.

Decorated arch

Arched structures give the interior a special style (see Arches in the interior), which may vary depending on the finish. You can decorate them with wood, acrylic mirrors, decorative plaster and, of course, wallpaper (see Framing an arched opening). The last option is the simplest and most budgetary, but at the same time one of the most common. Unlike other finishes, wallpaper can be changed and varied as often as desired.

Despite the apparent simplicity, wallpapering of the arch should be carried out in compliance with certain rules so that the result of the work is pleasing to the eye. Therefore, it is worthwhile to dwell in more detail on how to glue wallpaper on an arch.

Wallpaper selection

It would seem that the question of choosing wallpaper for the arch should not arise at all: what's the difference, what will be the pattern, color, texture? However, it should be remembered that it is quite difficult to dock curved boundaries with each other. and if at the same time it is necessary to combine the drawing, then the task becomes even more complicated.

It will be easier to choose wallpaper for the arch if its inner surface is pasted over with completely different color-compatible wallpaper or painted. In this case, the pattern on the main wall can be anything, but inside the arch it is better to make it solid.

Companion wallpaper

Now on sale very often you can find companion wallpapers with a common background and different patterns... They are ideal for finishing arched openings.

If you use patterned wallpaper for pasting the outer wall, then the arch opening itself can be trimmed with plain or striped wallpaper.

A few words should be said about the quality of the selected wallpaper. If you have an opening between rooms in the form of an arch, then this zone will experience a rather large load. The walls of the arch must be cleanable and resistant to mechanical stress. This means that paper wallpapers are not suitable here. Better to choose glass wallpaper, bamboo wallpaper, or at least thick non-woven or vinyl, which can be wiped with a damp sponge.

Not so strict requirements for arched niches in the wall, especially if they are located at some distance from the floor.

Work order

If you search the Internet for the answer to the question of how to paste over the wallpaper with wallpaper, you will come across the same instructions everywhere.

It has a right to exist and is quite acceptable for getting acquainted with the technology of this work.

But it seems that this instruction was written several decades ago, when no other types of wallpaper, except paper, existed. In any case, in our country. Many resources even suggest gluing wallpaper on paste.

Pasting the facade of the arch

You will understand what this is about when you read this manual. We will also briefly describe it, because in the case of smooth paper wallpapers, it may well be applied.

Starting to pasting the wall in which the arched opening is located, calculate that the edge of the latter in front of the arch of the canvas is not too close to the opening. The wider the wallpaper strip, the easier it will be for you to work.
Glue the next canvas as usual, without cutting it out along the arch. After gluing with sharp scissors, cut off that part of the canvas that went beyond the opening, but not exactly along its contour, but backing off by 2–2.5 cm.
Cut this free strip of wallpaper every 2-3 cm perpendicular to the line of the opening, wrap the resulting tabs inward and glue.
Paste the top and the other side of the arched opening in the same way.

Pasting the inside of the arch

Measure the depth of the opening and the total length of the arch from one bottom point to the other.

How to glue the wallpaper on the arch?

Cut a strip of the desired length from the wallpaper, but make it a couple of millimeters less wide. If the arch is very long, make the strip a little longer and cut it in half.

Stick the strip in the opening from bottom to top.

As you yourself understand, if you fold modern thick or textured wallpapers into the opening, you simply won't be able to stick another layer on them. Therefore, experienced finishers answer the question of how to glue the arch with wallpaper, like this:

First paint the edges of the arch with paint to match the wallpaper.
After it dries, cover the facade as described in the first two paragraphs of the instructions. But do not glue the wallpaper inside the opening, but wait until the glue dries, and carefully cut off the excess with a sharp knife, pressing it to the edge of the opening.
When cutting a strip for interior decoration, make it a little wider than necessary. Glue, aligning the factory edge of the wallpaper with one of the edges. And after drying, also carefully cut off the excess paper.

Based on materials from the site: http://sdelaidver.ru

Decorating an arched opening with your own hands is a fairly simple and not very time-consuming process, but there are several nuances of such a specific work. Repair professionals give a ton of useful tips about how to properly paste over the wallpaper so that the result is of high quality and aesthetic.

The procedure is based on proven technology that has been repeatedly tested by specialists at different levels:

selection of wallpapers that are suitable in structure, color;
alignment, plastering of the surface and edges of the arch;
padding;
finishing the facade of the arched opening;
pasting the arch.

Required tools and materials

At each stage of decorating the arch with wallpaper, the master will need a certain set construction tools and materials. It is not recommended to ignore the advice of professionals and be limited to improvised means.

What tools and materials are needed:

long ruler, pencil;
wallpaper glue;
brush brush;
brush or paint roller for leveling wallpaper;
scissors;
construction knife (preferably with breakaway blades);
a rag to remove excess glue.

As additional tools for accurate alignment, you may need a level, plumb line, laser level.

You can decorate the arch different materials but when choosing suitable wallpaper it is better to stay on durable, washable. The following types are suitable for these purposes:

vinyl;
non-woven;
bamboo;
glass wallpaper.

During the operation of the room, the opening always experiences heavy loads, regardless of the purpose of the rooms, therefore, the surface must be periodically wiped with soapy water. The right decision would be to reject paper types. This is dictated not only by their low wear resistance - the paper can wrinkle after pasting. Typically, the surface smoothes over time, but sometimes it deforms strongly at bends.

When pasting, it is rather difficult to dock the drawings, so it is better to choose wallpaper in monochromatic colors or with rare small illustrations.

For decorative finishing rooms are very popular today companion wallpaper - they go well with each other, but have different design... Thus, wallpaper with any pattern can be glued to the facade of the arch, and the inner part can be covered with solid colors, but compatible in color.

Often there are other solutions - when, regardless of the texture and color of the facade, the vault is trimmed with wallpaper in a contrasting color or kept in the same color scheme. For example, a vault can be covered with wallpaper in a neutral shade or a contrasting palette can be used, but the color of the vault should match the baseboards, outlets and switches.

Preliminary surface preparation

Preparatory work is an integral stage of interior decoration in an apartment. The arched opening should be flat, not have large depressions or protrusions on the surface.

List of required tools and materials:

putty knife;
putty;
primer;
leveling corner;
glue or screws.

Work on preparing the surface for finishing begins with an assessment of the condition of the arched opening. Particular attention is paid to the vault - if it is curved, has potholes or chips, then it must be pasted over with a special leveling corner. It is a thin and flexible material, usually glued along the entire length of the arch on both sides of the arch. If a metal corner is used, it must be mounted on self-tapping screws.

Finishing putty can be used to smooth out the chipped opening. If the potholes are too large, they should be filled with a composition based on cement and sand, and the corners must be leveled until the mixture is completely dry.

You can check how flat the walls of the arch are using a simple plumb line or laser level linear type.

When the edges of the arch are aligned, the entire surface is plastered finishing plaster- this is necessary in order to hide the fasteners. The next layer is a primer, and it is better to choose special composition under the wallpaper - it hides all the flaws well and paints the facade and vault white.

Arch pasting technology

Wallpaper should be glued on a clean, flat surface, so the arch must be cleaned of dust and any dirt. Next, prepare the glue - it is best to choose it in accordance with the type of wallpaper. Experts recommend mixing the thick composition, it is optimal to introduce 10% less water than indicated on the package. This consistency dries more slowly, does not form lumps and will allow you to more accurately adjust the elements, which is especially important when joining patterns.

Instructions: how to properly paste over the wallpaper

Calculate the order of stacking wallpaper sheets. A standard opening 1 m wide takes 3 sheets, one of which is glued strictly in the middle, the two extreme ones capture about 25 cm of the arch on each side. If the layout is non-standard, the sheets are glued in the same way, the main thing is that at the edges of the arch they go to the arch by at least 20 cm, otherwise it will be difficult to make neat edges.
Stick on one outer sheet of wallpaper.
The opening is formed after pasting - with sharp scissors, a sheet of wallpaper is cut along the contour of the arch, leaving an edge of 2.5-3 cm.
The free edge must be glued to the arch. To do this neatly, the edge is cut along the entire length strictly perpendicular to the wall. The distance between the cuts should be approximately 3 cm;
Apply glue to the edges of the arch, glue each edge element, bending it over the notch.
The central and side sheets are glued in the same way, then the opening is cut out and the edge is formed.
The arch itself is trimmed at the end. To do this, you need to measure its width and length from one point near the floor to another, cut a strip of wallpaper according to these parameters. The sheet should be 2-3 mm narrower than the width of the arch - this is necessary so that its edges do not spoil appearance... If the height of the arch is greater than the standard one, the wallpaper sheet can be divided into two parts by joining them in the center.
In the process of finishing, the wallpaper is leveled with a brush, because even a rubber spatula can ruin the sheet at the fold and some of the work will have to be redone. Non-woven wallpaper does not level; you can smooth the surface with a paint roller.
Wallpaper trimming along the contour of the plinth is carried out at the very end of the work. When pasting the vault and the front part, a margin of at least 3-4 cm is left at the bottom.
Decorative edge trim with flexible plastic corner. This is the final stage, which is not considered mandatory, but if the arched opening is made in a drywall wall (or the wall was leveled with drywall sheets), it is better to strengthen the edges. This material is relatively fragile; over time, the arch can deform. The corner protector can be easily glued onto good glue- for example, liquid nails can be used.

This completes the decoration of the arch with wallpaper. The presented technology is versatile and suitable for finishing an opening of any type or size. Practice shows that all work is quite simple and feasible even in the absence of professional skills. To avoid annoying mistakes, it is enough to follow the recommendations of experts and follow the instructions.

An arch is called a curved ceiling of an opening in a wall or a span between two supports. Today, arched elements are widely used to decorate residential interiors. In the form of an arch, doorways or niches in the walls can be decorated. In the process of performing cosmetic repairs, the question may arise, how to paste over the arch with wallpaper?

The arch is a beautiful and original architectural element that is increasingly used in the design of residential interiors. Such designs give the interior a special style and a certain chic, but this is possible only if the arch trim is done beautifully and neatly.

When planning to decorate the walls in the room with wallpaper or use photo wallpaper, you will have to think about whether the arch can be similarly decorated. I must say that this finish is the simplest and most common.

Choice of materials

Having decided to decorate the arch with wallpaper, you need to choose the right materials for repair.

Selection of drawing

Why is it important to choose the right wallpaper pattern? The fact is that it is very difficult to do the joining of canvases on curved surfaces, and if at the same time it is necessary to combine the drawing, then the task will become practically impossible.

When planning to paste over the arch with wallpaper, you should choose wallpaper that is plain or with an abstract small pattern, that is, those that do not require combining patterns.

Advice! There is another finishing option, in which only the pediment parts of the arch are pasted over with wallpaper with a pattern (any), and the lower (curved) part is painted or pasted over with plain wallpaper matching the main color.

Type selection

In the event that it is planned to paste over the arch, which is installed in the doorway between the rooms, then you need to understand that this area will be subjected to significant mechanical stress. In particular, the surface of the arch will have to be cleaned regularly.

And this means that you should not choose simple paper wallpapers that do not withstand mechanical stress poorly. The best option would be glass fiber or thick vinyl or non-woven panels. This finish can be wiped clean with a damp cleaning cloth.

Can murals be used to decorate the arch? Quite! However, such repairs will not be cheap, since you will have to order wallpaper based on the size of a particular arch. In addition, when choosing photowall-paper, one should give preference to a material based on a vinyl or non-woven base, since such photowall-paper is much stronger than paper ones.

How is the pasting carried out?

The procedure for carrying out work on the decoration of the arch with wallpaper depends on the type of material used. In addition to wallpaper and glue, it is also worth purchasing special corners for finishing the edges of the arch.

The procedure for pasting using thick wallpaper

We prepare the arch for finishing in the same way as the walls.
The edges of the arch must be painted with paint in a tone that is present on the wallpaper used. This is necessary because the corners cannot be bent when gluing thick non-woven wallpaper.
After the paint has dried, you can begin to paste over the arch. Work begins with the gable part of the part. It is necessary to calculate so that the edge of the canvas closest to the arched opening is not very close to it.

Advice! Craftsmen advise that the distance to the opening is at least half the width of the wallpaper.

The canvases are glued to the wall without making an arch-shaped cutout. After gluing the canvas and drying the glue, using scissors, cut off the part of the canvas protruding from the edges of the opening. You need to cut along the edge of the opening, tightly pressing the canvas to it.

When cutting out a strip for sticking to the inside of the arch, it must be made a little wider than required. In the process of gluing, the edge of the wallpaper is aligned with one of the edges of the arch. After the glue has dried, the excess web is cut off.
For finishing the edge of the arch, you can use corners that are fixed with glue.
How and how to decorate a drywall arch so that it becomes a home decoration

You can use plastic or wooden corners... This finishing option will give the arch a neat look, in addition, the corners will prevent the wallpaper from "scuffing".

The procedure for pasting using thin wallpaper

In the event that it is planned to paste over the arch with thin wallpaper, you need to act a little differently:

The start of work is carried out in the same way. After the canvas is glued to the gable part of the arch, you will need to cut off the excess. Only in this case, the excess is cut off not at the level of the edge of the arch, but stepping back from it by 2 cm, that is, leaving an allowance.
This allowance must be cut every 3 cm and by wrapping the resulting "tongues" on the inside of the arch to glue them.
Similarly, the second pediment part of the arched opening is pasted over.
When cutting a strip for sticking to the inside of the arch, the part is made 2 mm narrower than required. Glue the strip to the inside of the opening.
It is advisable to use corners to trim the edges, this will extend the life of the trim.

So, wallpapering is one of the simplest and most common types of finishing an arched opening. If the work is done correctly, then the arch will look beautiful and attractive. How to finish correctly and get good result, can be found in the lessons on the repair.

How to paste over an arch and a doorway with wallpaper in 4 easy steps

Arches in the apartment: Photo

Making openings in the form of arches has been used for a long time and is often one of the characteristics of the style in design. Therefore, when planning repairs in an apartment, in which it is necessary to turn the doorway into an arched doorway, you should approach in advance the choice of its design, materials of manufacture and decoration.

Arch purpose
Types of registration
Variety of styles

Arch purpose

An arch is a way of connecting two rooms, its appearance should be connected and be a continuation of the interior of each of them. Exists a large number of styles of decoration, in the photo of the design of arches in the apartment you can see different variants decor.

Types of registration

To increase comfort in Khrushchev, small apartments, they often move partitions between rooms or even demolish them.

One of the ways to improve the layout and create a spectacular look is to enlarge the doorway and make an original arch.

Such an opening can change the perception of a room, make it unrecognizable, decorate, and emphasize the chosen style. And if the door serves to separate, isolate rooms, then the arched structure, on the contrary, unites the rooms, makes the interior lighter, sublime, elegant, and decorated in classic style, Empire style, can add grandeur and pomp.

In cases where it becomes necessary to close the passages between rooms, there are different solutions... The capabilities of modern industry make it possible to manufacture doors different shapes, including the size and configuration of the opening, use sliding, folding models .;

In some cases, you can simply hang suitable curtains.

There are many ways to create arches. Among them it is easy to choose suitable option available to install by your own hands.

For the manufacture of the arch, natural and decorative stone, brick and aluminum profile, plastic and MDF board are used.

Constructions of any shape, complexity, are obtained from drywall. This versatile material easily allows you to obtain high-quality flat or semicircular surfaces, with decorative cutouts, reliefs, built-in shelves, lights, additional finishing elements.

They can be finished with wood, stone, tiles, or simply plastered, pasted over with decorative roll materials, for example, film, wallpaper.

In addition to the structures of the openings located on the border of the division of adjacent rooms, there are decorative arches... They are intended for decoration of premises, giving it certain features.

Variety of styles

The process of correct construction, finishing of openings in a certain style is quite laborious, requires special skills and knowledge.

Among the most popular types, there are several of the most demanded and frequently encountered - classical or Roman arches. Their main feature is a semicircular shape, with a well-defined, regular arc radius.

The design does not have additional protruding or asymmetrical parts, it is suitable for large rooms with high ceilings.

Decorations are elements inherent in the chosen style. These include: stucco molding, friezes, painted details, gilding, light coloring. The arches located in the spacious hall are complemented by finishing in the form of columns, semi-columns.

Art Nouveau or British arches. Their peculiarity lies in the truncation of the radius, the arched arc has a slightly modified straightened shape, rounded corner parts.

Such varieties are suitable for both large rooms and for installation in hallways with low ceilings.

Slavic type. The openings are rectangular with smooth corners. These varieties are used for any premises in which they are combined with other decorative elements.

Half arches or Thai. Often used to create unusual original design in different rooms.

They have curly ways of smoothing corners and making the radius of the side part.

Portals. Most popular varieties. Are arches rectangular with different kinds finishes.

Some samples are real works of art, decorated with stucco, stained glass, flowers.

Trapezium. This design is similar to a kind of portal, with well-defined, even edges and sewn-in beveled corners.

Arch of the transom. It is a decorative design of a rectangular opening in the form of a superstructure above it, increases the penetration of light into the room, serves as an interior decoration.

Modern materials provide unlimited possibilities for creating arches different models: in the form of an ellipse, asymmetrical shapes, curved lines, non-standard shapes.

In any case, the use of an arch will make the apartment unusual, unlike others, decorate the interior, and become its highlight.

See also: Arch decoration decorative stone, Combination of kitchen and hall

How to glue the wallpaper on the arch: what are the nuances?

We are doing repairs, we decided to glue the wallpaper on our own. There is some experience, but the presence of an arch confuses. How to glue the wallpaper on the arch so that it looks beautiful and neat?

What kind of wallpaper can be pasted over an arch in an apartment?

Are there any nuances in the work, which wallpaper is better to choose?

Before you start working on wallpapering the arches, you need to decide what kind of wallpaper is best to buy.

Therefore, we buy wallpaper with some kind of abstract pattern that does not require combination.

As for the type of wallpaper, vinyl, non-woven and glass wallpaper are also suitable.

The canvas that overlaps the arch, with glue as usual, then we take very sharp scissors and cut off the excess part of the sheet, leaving three centimeters to overlap the arch.

A strip wrapped around an arch

often cut (approximately two centimeters), these cuts will facilitate gluing the strip to the arch.

When the same work is done on the opposite side, it will be possible to start pasting wallpaper on the inner surface of the arch.

Cut off the wallpaper to the width of the opening, but a little narrower, by three millimeters (this is so that the edges of the wallpaper do not protrude beyond the width of the arch).

It is better to use two strips, it is more convenient and prettier to join the strips in the center under the arch.

Another important point. Insert strip, it is more convenient to glue from bottom to top,

and not vice versa.

That is, in general, all, it cannot be said that the work is extremely difficult, rather painstaking, yes.

Required tools

Dry plaster is used in finishing exclusively for leveling the walls and is not a final coating, most often after surface sheathing is required wallpapering drywall or painting it. Both options are good in their own way, but if you do not want to feel a pungent smell for a long time, causing headaches and soaking things, it is better to opt for wallpaper.

Without what the wallpapering of drywall will not begin?

It would seem that it could be simpler - to apply a piece of starch-brewed glue to the back surface of a piece of wallpaper cut from a roll of wallpaper, apply it to the wall and carefully level it. And many believe that it is even easier to perform the same operation on drywall. However, not everything is as easy as it seems. The gluing technique is standard, but more thorough surface preparation is required. "But why?! - someone will ask, - "after all, the sheathing sheets are already very even." That's right, but imagine that you want to cover the walls not with rough paper canvases, but with thin vinyl wallpaper, and if you like light colors, the seams of the joints of the sheets will shine through well.

If the drywall is not finished with putty, remove the wallpaper when next renovation will have to be together with the cladding, since the glue will very firmly fix the decorative coating on the cardboard.

Now we select materials for all upcoming stages of work. Not any putty will suit you, in no case should you buy the one on the container or packaging of which it is written that it is for external works... V facade mixtures there may be components presenting some health hazard. It is also not recommended to take cheap mixtures, since they have higher consumption and rather low quality. It is best to give preference to ready-made mixtures, because to obtain a solution from dry material, you need a special mixer; you cannot properly mix the composition by hand.

Making an arch in the kitchen with your own hands

The arch was made by hand, all that remained was to decorate it, namely to divide the wallpaper zone and silk ...

Unlike putty, adhesives are not sold ready-made, this would significantly reduce their useful life, so you will have to dilute them yourself, from the dry contents of the package, according to the instructions. You need to choose a composition based on what kind of wallpaper you are going to decorate the walls with, since the mixture intended for paper panels will not hold heavier non-woven ones. Take glue with a margin, as unforeseen expenses may occur, such as gluing joints... Pasting drywall with wallpaper will require the following tools: a wide spatula for putty and plastic for wallpaper, as well as a roller. Prepare rags, wide and thin glue brushes, scissors with a construction knife, a plumb line and a level.

Surface preparation for pasting

So, the walls are sheathed, the rolls of wallpaper are in an even pile, we should start finishing. But first, let's see how smooth our indoor surfaces are. We take an ordinary spatula, preferably a metal one, and draw it along all the joints of the sheets and the places of fixation with screws. It can also happen that the tool in your hand suddenly gets caught on something. It can be an uneven joint, when one sheet is slightly higher than the other, or a screw protruding from the plane of the drywall. Self-tapping screws that are not flush with the surface must be screwed in with a screwdriver, and we will smooth the joints.

Even if there is no obstacle to smooth movement in any place, and everything is in order with the base, it is still necessary preliminary finishing putty. Is the spatula still in your hand? Set it aside. Do not be surprised, just before starting work, you should cover all surfaces with a primer. If the drywall is not waterproof, do not overdo it by covering the planking with an even layer of primer. After it dries, you can also take a spatula with a trowel. We scoop up the pasty mixture and apply a thin layer to the surface of the drywall. It is not necessary to cover all of it, it is enough just to hide the joints and recessed screws.

In order to hide the seams as thoroughly as possible, glue the serpyanka tape on them with PVA before applying the putty. Then, when the layer hardens, sand it with a zero sandpaper, and carefully examine the result. The main thing is that the surface does not shine through anywhere, if something similar is observed, we apply a primer and after it dries, the second layer of the mixture. Then again we wait for hardening and again we put the gloss, polishing the base with sandpaper. Having achieved perfect result, apply the primer again and as usual we wait for it to dry out. Now you can start wallpapering the walls.

How to stick wallpaper on drywall: the subtleties of finishing

Decorating the walls with wallpaper is not difficult and even one person with some experience can handle it. The main thing is, before sticking the wallpaper on drywall, carefully measure the walls and calculate how many canvases each roll will need to be divided into, and outline where exactly the short residues will be glued (they are usually used to decorate areas above door and under window openings).

How to stick wallpaper on drywall - step by step diagram

Step 1: drawing a landmark

It all starts with the markup. We take a level and a plumb line, with their help we draw a vertical line along which we will orient the first sheet. Only then do we start preparing the glue. When the composition is ready, you need to act quickly. We measure and cut off a strip of wallpaper from the roll. The height of the walls is known in advance, since before that they were hidden under plasterboard panels.

Step 2: Applying the adhesive

We take a thick brush and grease thoroughly with glue back side sheet. If it is not paper, fold the cut in half so that the glue penetrates as deeply into the material as possible. Paper sheets, being impregnated with a viscous mass, begin to stretch and tear, so we apply them to the prepared surface immediately. Bamboo, woven, non-woven and vinyl wallpapers you can start smoothing on the base after a few minutes, nothing will happen to them. It is very important to remember that you are working with drywall, a standard sheet of which is afraid of moisture. This means that you cannot smear the glue too abundantly, so that the cladding on the walls does not get wet. For the same reason, do not cover dry plaster with a sticky composition when working with non-woven wallpaper.

Step 3: pasting

We sculpt the canvases from the first end-to-end, so the seams will be less visible. If the pattern on the wallpaper is repetitive, the pattern should be aligned on two adjacent canvases. Having attached a cut to the base, we take a plastic spatula and carefully, trying not to damage the structure of the finishing material, we run along the wallpaper from the middle to the edges, from top to bottom, removing air from under the panel. You should not rush to prevent the appearance of wrinkles and bubbles. We iron the seams with a roller, and if there is not enough glue somewhere, we drive it under the edges with a thin brush.

Since drywall is a very flat surface, the cuts attached to it must match the edges clearly. If this does not happen, then the roll turned out to be defective, but this is fixable. We just overlap, and when the composition grasps a little, we make a cut along the seam with a construction knife and remove the excess pieces from above and from under the cut. The locations of the sockets and switches (previously removed), as well as the outlets of the wires from the casing where there will be wall lamps, are covered with a single piece of wallpaper. Then we make a cruciform incision and release the power point. Platbands and door frames we install after finishing the pasting of the walls.

How and how to decorate a drywall arch so that it becomes a home decoration

After plasterboard arch made, it needs finishing. Despite the fact that at first glance this operation seems to be simple, this process often causes difficulties for ordinary citizens. Therefore, if you do not know how to finish a drywall arch, then this article is for you.

The arch can favorably emphasize any area of the apartment.

Almost any finishing materials can be applied to drywall, which many designers use with pleasure. However, when it comes to arch, in most cases, the choice comes down to three materials:

wallpaper,
decorative plaster,
natural stone.

Each of them has certain features, which will be presented below.

Of course, this finishing material is the most popular in our country due to its availability.

Dignity

Wallpaper goes well with plaster decorative elements

Simplicity. Decorating a drywall arch with wallpaper will not be difficult even for an inexperienced craftsman. Perhaps the only difficulty can arise when using thick samples for painting.
Availability. The cost of this material is much lower than most of its competitors. This factor is often the determining factor.
Diversity. Perhaps, it is difficult to argue with the fact that wallpapers have the most varied colors. This allows them to fit perfectly into any interior.

disadvantages

Short operational period. This is the main drawback of wallpaper. Over time, they begin to turn yellow and lose their original gloss.
The complexity of the restoration. In the event of damage to a certain area, it will be extremely difficult to restore it without resorting to drastic measures. Making something like a patch is unlikely to work the first time.
“Fear of moisture. In rooms with high humidity the wallpaper will deteriorate very quickly. However, today there are models that are not afraid of this irritant, but their cost is quite high.

Inner stripe is best applied from top to bottom.

If you have never glued wallpaper before, then this instruction will be very useful to you. It is better to consider all actions in stages:

The first step is to dilute the glue, according to the instructions that come with it. The most important thing at this stage is to prevent lumps from forming, as they can compromise the smoothness of the gluing. To do this, you need to mix the composition extremely thoroughly.

Tip: in order to most effectively stir the glue solution, you can use a drill with a special nozzle.

The first step is to stick the strip on the wall itself near the arch. Next strip should be positioned so that it covers small area arched opening. When it is glued, you should cut off the protruding part, leaving a small allowance of 2-2.5 cm.
Next, you need to cut the allowance at an interval of 2-2.5 cm, and then bend it towards the slope. Then, using a brush, this part must be glued to the surface as tightly as possible.
By the same principle, it is necessary to paste over the arched plane from the side of another room.

How to properly glue the wallpaper on the arch

The last step is to paste over the arch. To perform this operation, you need to cut a strip that will correspond in width to the depth of the opening. Moreover, it should be slightly longer than the opening, as this will allow the strip to move freely until the exact coincidence of the pattern.
This strip must be glued to arched vault and the side walls of the opening. In situations where the arch is located quite high, you can divide the strip into several parts.
Finally, it is recommended to iron the wallpaper thoroughly with a dry cloth to prevent bubbles.

In most cases, wallpapering is straightforward. However, if such a moment is present, then you can use the training videos that can be seen on our portal.

Decorative plaster

Other equally popular finishing material is a decorative plaster. From ordinary putty it differs in that it allows you to create embossed textures.

Dignity

Relatively simple application. Due to this, many people prefer to do this operation with their own hands. This allows you to save some part of the money.
Profitability. If you compare this material in the ratio of price - service life, then it has the most optimal indicator.

disadvantages

Difficulty of restoration. If any area is damaged, it will be extremely difficult to repair it, giving the surface an even appearance. The new layer will stand out noticeably.
Difficulty in leaving. If necessary decorative plaster will be extremely difficult to clean. Firstly, it is "afraid of moisture", and, secondly, it has a relief structure.

If this finishing method was chosen, then all operations will take place in the following sequence:

The first step is to plaster the arched opening. This is necessary so that the seams between the massive part of the opening and the sheets of gypsum board do not appear in the future. In addition, this measure allows you to make the final surface as flat as possible.

By showing imagination, you can create a truly unique texture

Decorative plaster does not require careful leveling of the surface. Therefore, when using it, it is enough just to get rid of significant irregularities by the filling method.
Applying the filler evenly over the entire area of the arch, it is necessary to treat it with a primer. This measure ensures stable adhesion of the surface to the plaster.
After the primer has polymerized (depending on the specific sample, it can take from 4 to 20 hours) it is time to apply the plaster itself. A decorative relief must be formed on freshly applied material using a sponge or float.
Only when the plaster is completely dry can it be exposed finishing, that is, painting.

Decorative rock

Finally, if the previous two options do not suit you, you can use a decorative stone.

This material allows you to favorably emphasize the arch

Dignity

Showiness. Of course, the appearance of this material deserves the highest mark. It adds elegance to the room.
Life time. A decorative stone is able to “serve for several decades without losing its original gloss.
Ease of care. It is extremely easy to wash, as it is not afraid of moisture and most detergents.

disadvantages

High cost. The price of decorative stone is extremely high. For this reason, the demand for it is rather modest.
Complexity of installation. Only a professional (or at least a person with a set of certain skills) can finish the surface with such material.

Mounting

Of course, finishing with decorative stone is the most effective, and at the same time laborious way. Of particular difficulty is the decoration of the arch vault.

It is worth noting that this material does not require careful alignment of the walls, which simplifies the task a little. So, the work must be carried out in the following sequence:

First, the styling solution is prepared. It can vary depending on the type of stone, but it almost always consists of cement, sand, lime and glue. In order to facilitate the task, you can use "liquid nails".

Tip: The exact consistency of the mortar is best known when buying a finishing stone.

The first stone must be laid at the bottom - at the junction of the opening and the wall. It must be adjusted using a level and pressed as tightly as possible. In order not to be distracted in the future by sealing the corner, it is better to mount the stones "overlapping".
Those stones that will be installed along the arc should be cut strictly along its radius. To do this, you can use wire cutters or a sander. The resulting cut is sanded with a file.
The seams need to be repaired with a special solution (usually sold with the stone itself).

Conclusion

This article examined the main options for finishing the arch. However, it is not necessary to adhere to the above materials. You can, for example, evaluate various photos presented on this site and pick up more “outlandish material.

How to paste over the arch with wallpaper

Thus, the corner of the arch will look good in you, and you will protect the wallpaper from mechanical damage. The corners will not be damaged or peeled off. And you will make your job much easier.

The shape of the arch is such that it is impossible to match the pattern on its front and side sides. Therefore, if you want to decorate the entire arch with the same wallpaper, choose canvases without a pattern (plain), or with an abstract or small pattern that does not require alignment. The second method is to trim the wallpaper at the corners of the arch so that you can see the arched painting corner. This is a corner that is glued to the arch during the puttying process.

Here is a photo: To make the result happy, before starting work, you should prepare tools and materials, as well as prepare the walls and an arched opening. Wanted: You will understand what this is about when you read this manual. We will also briefly describe it, because in the case of smooth paper wallpapers, it may well be applied.

How to carefully wallpaper an arch in an apartment

At each stage of decorating the arch with wallpaper, the master will need a certain set of building tools and materials. It is not recommended to ignore the advice of professionals and be limited to improvised means. Finishing putty can slightly level out the chips of the opening.
If the potholes are too large, they should be filled with a composition based on cement and sand, and the corners need to be leveled until the mixture is completely dry. Preparatory work is an integral stage of interior decoration in an apartment. The arched opening should be flat, not have large depressions or protrusions on the surface.

This consistency dries more slowly, does not form lumps and will allow you to more accurately adjust the elements, which is especially important when joining patterns. You can decorate the arch with different materials, but when choosing suitable wallpapers, it is better to stay on durable, washable ones. The following types are suitable for these purposes:

Male site

Can murals be used to decorate the arch? Quite! However, such repairs will not be cheap, since you will have to order wallpaper based on the size of a particular arch. In addition, when choosing photowall-paper, one should give preference to a material on a vinyl or non-woven base, since such photowall-paper is much stronger than paper. Portals are mainly made of plasterboard.

Before gluing the wallpaper, the seams between the sheets and the attachment points of the self-tapping screws must be processed using a serpyanka tape. After that, the entire area is treated with a primer. We proceed to pasting the arch: We take a tape measure in our hands and calculate the width of the sheets from the corner of the wall on which the arch is located, so that the sheet closest to the arch does not turn out to be too narrow in width, that is, the more overlap on the arch the better (on the opposite side of the arch we do the same). The glue is applied and left to saturate for a short time.

Using a brush, glue the fold to the inside. In addition, it is necessary to clarify the depth of the arch by measuring it with a ruler. After that, the wallpaper is cut off in one strip, the width of which should be 0.5 cm less than the depth of the arch. The strip is glued starting from the floor on the one hand, passing through the vault to the second side.

There are many ways to create arches. Among them, it is easy to find a suitable option available to install with your own hands. When shopping, the main thing is not to forget about quality. The arch is a rather difficult area for wallpapering, so the material should be good. It is desirable that they can be washed and are resistant to mechanical stress.

According to these criteria, paper wallpaper will not the best choice... Although it will be less difficult to paste over the arch with them than with thicker wallpaper. An excellent option there will be vinyl or non-woven wallpaper. They can be washed from time to time to avoid unnecessary contamination.

To paste over the arch in the apartment, you will need 2-3 strips on standard size... Pasting starts from the window. The number of sheets should be calculated so that an unpapered space of 25 centimeters remains in front of the arch.

Next, you need to treat the area and a piece of wallpaper with glue, let them soak for about 15 minutes. Do not forget that you do not need to cut the opening from the wallpaper right away, as you risk not guessing the size and simply ruining the wallpaper. Everyone wants to create comfort and coziness in their home. There are many ways to do this. If you decide to renovate your apartment and completely renew its style, one of the options may be to create an arch in the interior openings.

The arch visually divides the room into functional areas, it will look beautiful in the openings of rooms adjacent to the kitchen, corridor, living room. Considering the fact that arches are placed in the openings of transitions from one room to another and there is most movement of apartment members, the wallpaper in this place will often get dirty, the walls of the arch will be more succumb to mechanical stress. Arches of various shapes, sizes and configurations are becoming an increasingly popular element of modern interior design. Earlier I already told you how to make this structure out of drywall, and today I will tell you how to properly paste over it with wallpaper.

If the wallpaper is thick enough, the above method will not work for us. It will not work to gently bend the dense material while maintaining the rounded shape of the opening. And the thick folded part will show through under the inner strip. Therefore: The easiest way is to paste over the arch with the same wallpaper, choosing one-color rolls without a pattern. Or with a small image that does not require alignment.

One more option will do creative people: choose wallpaper with an abstract pattern, and combine it with different pictures when pasting. It will be easier to choose wallpaper when the surface inside the arch is pasted over with other compatible colors or painted. Then the patterns on the main wall can be any, however, it is better to make the inside of the opening plain.

In order not to be distracted by accompanying work in the process of wallpapering, you need to prepare an arched opening in advance and necessary tools... You will need: Ordinary wallpaper glue may not support the weight of a strip of wallpaper, so it is better to prepare the composition in a 2: 1 ratio, that is, 2 parts of wallpaper glue and 1 PVA. After the glue has swollen, it is mixed and gluing begins.

You need to wait until the wallpaper is completely dry;
The corner is tried on and cut with a construction knife into pieces of the required size;
First, the elements are glued to the curved part;
When gluing the side pieces, take Special attention the joints, the neater they are, the better the appearance of the arch will be.
Construction knife... Need a very sharp version with a rigid 25mm blade. In addition to the knife, be sure to purchase a set of spare blades. A good option- a tool with segment blades, they are very hard and cut very accurately;