Preparation of plastic windows for the winter if you wish, you can turn into a whole rite. Fortunately, the mechanism is quite complicated, and there is a real order, where to turn around. Let's start with the beginning and tell about everything in order. In order for each reader to understand how to configure plastic windows for the winter. Let's proceed.

What can be done with a plastic window for the winter

Here is a list of events that can be included in:

Setting the fittings of the plastic window for the winter

Each fitness manufacturer provides this quality. And Roto, and GU, and Maco. The essence is that each of the heads of latches sticking along the end of the sash can be configured in such a way as to slam the window slightly more or weaker. Depending on this, the force of drafts changes. What allows in the summer to have at home fresh air Without the need to open the window. And you need it all for saving fittings. What we have less triggings, the longer the plastic window will serve. Is it great - right?

But the settings in each case are different:

You see that in each case you can adjust the head properly. And to make it easier to do it, risk is applied to each element of the shut-off system. You can turn the head to the breathtaking, but after 360 degrees it will just return to the place. And due to the risk you can always understand what stage we are. As for the adjustment itself, the position of the head is easy to assess the eye. What she closer to the influx of sash, the window slaughters tightly. True, just?

And how. Take the tool and start. After each head, try whether the window is still locked, because not all response planks will be delighted with the fact that they tried to press them. On one head, where and how much can, you need to transfer your window to the winter mode of small air transmittance. It is better to do it when there is a little cool, because plastic has a decent temperature expansion coefficient, which unexpectedly in the frost can make their amendments. That is, the setting operation is clearly not necessary to carry out on the sun in the Sorokrevny heat.

Seals of plastic windows

As a result, rubber should be covered with a molecular film, which is usually enough about six months. On this, the setting of plastic windows for the winter in this part is completed. If necessary, change the sealer at all. And how to do it - we already told!

Principle of operation of plastic windows

Above, we considered adjustment, but this is completely different than the principle of action. So, around the perimeter of the window there are six-retaliated planks. Heads come there, locking the plastic window. What to do if suddenly the pen has been taught, and the sash does not want to close? Instead of glueing tape, you need to remove everything to a single retaliatory bar and try covering the window. Does not work? Then you need to adjust the position of the sash.

For this, there are two screws on the bottom loop, and one more is on the top edge of the sash head to the upper loop. It helps to fix the situation in many cases. First, the lower loop. It is necessary to remove the decorative cap from it and it should be examined. The vertical screw can be adjusted to the height of the sash suspension. If it hurts behind the bottom edge of the frame of the frame, rather a vintage clockwise (may differ depending on the design). If the sash touches the upper jacket, do inverse operations.

If the thing is that the handle does not lock, then begin to wear the response planks on the frame one. Checking the result. That is, with the complete absence of planks in any case, everything should spin. Otherwise, it can be in faulty fittings. Think, nothing can be done? If one of the angular gears broke, just remove it. The rest of the accessories will help to hold out to spring or until the moment as spare parts from the installer or another dealer. In any case, it is not necessary to freeze, although the draft will increase.

Sometimes only one plate is not locked. If the installation of the head in the summer does not help, just forget about it. Again until spring or the arrival of the master. Do not put this one republic, and let the window keep on the rest. It is clear that it is better than in the midst of winter spending on the installation of a new plastic window.

Accessories windows in action

Finally, if scissors led, you can generally remove the whole angle. Let the sash in the closed state holds only on one bottom loop. Just need to warn households that before the arrival of people from the service it is impossible to use the window. Well, and the master knows about refinement either does not hurt. Explain this as emergency situation. In the case of which the court will certainly take into account the circumstances if it comes to it.

According to the instructions, the above, you can also try to replace the faulty part of the fittings even before the thunder is born. Localled breakdown is usually simpler. To do this, it is enough to remove and make a number of non-hard operations. For example, by clicking on the safety tongue, turn the handle to and here. At the same time, you need to observe which part of the searches. If necessary, disassemble and remove the accessories. We have a whole review about it.

Refinement of the plastic window for the winter

Five years ago, low-emission glass was in the wonder, but today it is sold at about the same price as the usual. It is clear that it will be wisdom to buy a new glass package (or modify the old one for those who know how to do it). As a result, heat leakage decreases by about 30%. It is even better than to find a three-chamber glass. Checked! In addition, low-emission glass in the summer will reflect part of the energy of the sun.

But it is not all. In order not to come out, like those people who could not close the frame, it is recommended to install. This is such a smart thing, which in automatic mode can air the room. Even when everyone slept. And in the case of which it is possible to manually shout it tightly so as not to be cleaned. As a result, the family is guaranteed to get rid of all worries. And if you like it, put such valves everywhere where you can. This will help keep the houses of fresh, clean, and in fully automatic mode. That is, it is not necessary to worry about anything.

We believe that it is sufficient to told the topic of how to configure plastic windows for the winter. Therefore, we wrap up - to ambiguous meetings!

Install plastic windows often turns out to be not enough, as they also need their proper maintenance. If irregular operation, problems may occur, and in this case the window will not protect the room from wind, cold and noise. Most often pay attention to the named problem is when it is necessary to change the mode. To do this, configure.

Why regulate metal-plastic windows?

Everyone knows that plastic windows have two main modes: summer and winter, each of which operates its role. Window manufacturers usually indicate in their recommendations, how to properly use and configure metal plastic design. With confidence it can be argued that this avoids the mass of the problems.

About how it can be done correctly, we will tell you further in the article. It is important to remember that all recommendations will help properly adjust the metal-plastic design and keep warm in your home.

Why is it necessary on the "Summer Winter" mode?

Few people know how to set up a window, so some prefer to contact specialists for help. But there is nothing difficult in setting up the windows, and if you carefully examine all the recommendations, you can independently carry out all the work on regulating the design.

Initially, the adjustment is made when the windows are only installed. This greatly simplifies exploitation, but, unfortunately, it does not allow you to choose the desired mode in the future. For example, if the windows were installed in summer, then in the winter it is necessary to reconfigure them, and vice versa.

Specialists say that without adjustment, it is simply impossible to do without adjustment, as it is a kind of repair, which allows you to determine the preparation of the design to operate in the cold season. Setting the plastic windows for the winter allows you to improve their tightness, does not give drafts to penetrate the room. Thanks to her, the microclimate in the room will always remain at the normal level.

If the adjustment was carried out incorrectly, it will always be present in the room increased humidityand sometimes even frost on the windows. If the design is operated for a long time, then the tightness becomes minimal, and the reasons for this there is a huge set.

Often setting the plastic windows is required when the breakdown happens. To avoid this, they must be constantly adjusted as soon as the seasons change. If you leave the windows on the summer mode, then cold air masses can be easily penetrating the inside of the room, which will naturally affect the level of heat and the energy consumption for its conservation. By installing the windows for the winter period in the desired mode, you can save heat indoors.

When is the window adjustment for the winter period?

The setting of plastic windows "Winter-Summer" may be required in several cases on which it is worth the attention in more detail:

1. Adjust the windows immediately after the design was installed.
2. Even specialists can sometimes make mistakes when installing, such violations entail deviations, gaps begin to form. In this case, it will be necessary to fully repair and adjust the plastic windows.
3. Every two years, a technical inspection should be carried out. If the frame is operated without such checks, some deviations can be revealed.
4. The window can fail if it was installed in a new building or in an old house, as the building can do. It is easy to notice - after adjusting windows for the winter period in such a room will still penetrate the cold air. In this situation, it is important to take note of the possibility of sending a building, and problems can be avoided.

Naturally, this is not all the reasons why the window can be adjusted for the winter period, but they are the main things that the consumer may encounter.

Instructions for regulating windows for the winter period

Setting the plastic windows for the winter with their own hands has always remained the most relevant issue. To attract specialists to work, it is necessary to spend a pretty decent amount of money, and in order to fulfill all the work on your own, it is enough to follow the recommendations.

Design to winter need to prepare in advance, otherwise the owner may face big challenges During operation. The fact is that it will be very difficult to correct anything during the temperature decrease.

First of all, you need to pay attention to the fittings. Setting the accessories of plastic windows allows you to make that the windows will begin to fit tightly to the frame. If the windows before that were adjusted incorrectly, it will be possible to notice strong drafts indoors.

The window adjustment takes not so much time. In order to spend all the work, it will be necessary to use the hex key, which is available in almost every owner in the house. At the end of one sash, an element is located, which serves to lock, in a different way, it can still be called clamp. It is on a rectangular platform, but can be shifted up or down. It is very important that this clamp be shifted in the direction of the street when a strong cooling is planned, just this will provide the owner good tightness.

To how to drag the clamp, you should use the hex key. It is necessary to twist it counterclockwise, making a small amount of effort. Due to this, he will be able to turn into the correct position and will affect himself. Once all manipulations are fulfilled, it will be possible to say with confidence that the work is done at the proper level, and now in the room even in the strongest cold will be warm and comfortable.

How to set up different types of accessories for the winter period?

Each manufacturer of fittings is fighting for quality in its understanding, and this affects the adjustment of the plastic window. Some developers use a complex structure structure, and some are simplified. Consider all kinds of fittings and how can it be customized:

1. Roto has round heads in its designs, which is why the owner's problem may arise with the keys, as it does not work out. Here you have to do and search the key with a large cross.
2. Maco made sure that the heads were most convenient - manufacturers made their oval shape, and twisted them with conventional pliers.
3. The most reliable is the accessories of TORX. To go for the winter period, you will need to use the hex key.

Some developers of plastic windows use special protection in their system, at which the mechanism is turned 360 degrees, but as soon as the owner does it, the mechanism will return to his place. By the way, it is often not recommended that it is not recommended to do so, since the mechanism can simply break, and then it takes its full replacement.

It should be noted that the adjustment of plastic windows without specialists requires special attention And patience. As soon as one head is twisted, it is worth checking how closely the window is closed. As a rule, the adjustment of one head does not give anything, therefore, gradually twisting the rest, you can check the tightness from all sides and all the flaps of the metal-plastic window.

another way

When the plastic windows are set up, it is worth paying attention to the state of the seal. Often the cause of drafts from the slots is precisely in its wear. Such a seal is made of rubber. If the material is properly not to take care, then in a short time it will be possible to notice that no window adjustments can save the owner from the penetration of the cold to the room.

So that the seal is not strongly worn out, the special silicone lubricant should be used, which motorists love to enjoy. Due to it, the tires are covered with a special molecular film that is valid for six months.

Over time, the seal can be completely changed, and then the windows settings will be even easier.

What problems may occur when adjusting windows?

To date, some plastic windows have a complex design. Naturally, the setting of plastic windows with their own hands can cause certain difficulties. Such windows often require proper training By winter, so one adjustment in this case can not do.

The windows require special attention to themselves, and if they do not translate them on the summer or winter mode on time, then soon the service life will come to no. It is important to remember that if they always be in winter mode, it will soon be out of order, or rather, the seal will deteriorate. It is also advantageous from the winter regime for summer, because more fresh air will penetrate into the room.

Some are asked how to adjust the plastic windows alone. It should be noted that all manipulations are made very simple, so it is not necessary to seek help from specialists. Most often the complexity occurs when cylindrical eccentric cylindrical accessories are used. Before you begin to work, you must first carefully examine all the blocks blocking items and try to adjust the screws. Window manufacturers tend to leave their recommendations, so you can use their prompts.

Phased adjustment

When you need to configure plastic windows, some recommendations should be followed:

1. It is necessary to learn carefully the end of the sash. This part of the window is moving, with cylindrical elements that when moving come in window Rama And fix the sash in the same position. Among the elements you can see two stripes that are divided into two semicircles.
2. To translate the window in the winter mode, it is enough just to turn these stripes towards the street. In this case, it turns out an extension, and the window sash automatically enters the bar, and the frame is stronger stronger, and the air cannot freely penetrate the room.
3. You can return the windows to the summer mode in the same way, but for this you need to turn the sash in the opposite direction, more precisely, towards the room.

Innovations in the window setting for the winter period

Today is considered innovative windows With in this case, this term means windows with a three-chamber double-glazed window - such glass allow you to keep the heat by 70%. Some believe that the above windows are absolutely not suitable for the summer period, but it is safe to say that they will reflect the energy of the Sun.

You can easily install a climatic valve on plastic windows, then the setting of plastic windows will become even easier. In this case, without any effort, it can be done so that the air from the street will not enter the room, and, on the contrary, take care that fresh air in the house becomes more, ensuring good ventilation. Properly using the mechanism, you can achieve the expected results.

If you cannot adjust the window, it is worth taking care of the replacement of the seal. After all, when the product is operated for a long time, the installation of plastic windows can be almost impossible and it remains only to replace the seal. Over time, he may lose its properties, cracks appear in it, and recommendations on the transition to winter regime will not be given to the expected effect.

Will not be any work, you should buy suitable material and carry out the appropriate manipulations. It is advisable to hold the replacement when it gets cold in the house. The old seal is removed from the upper or lower angle, as soon as this work will be carried out, the grooves should be processed, and more accurately clean them from dust and dirt, otherwise the new seal will not be able to lie as it should. After that, a new seal begins to fit from the top angle, which is superimposed along the entire width.

It is very important to carefully ensure that it fell down tightly. Only when all work will be carried out, you can start consolidating a new seal. In no case to the rubber can not stretch, as it will not match the size with the window. Remember that the eccentric turns to the stop is also not recommended, otherwise it will be necessary to replace the sealer. Subject to all recommendations, the window adjustment will be held quickly and efficiently.

Most modern double-glazed windows have a function of translating accessories from winter period in summer. Basically, such properties are present in high-quality windows from well-known manufacturers.

Adjustment metal plastic windows From one season to another, it is carried out in order to create effective ventilation of the room. Due to this, it is possible to increase or decrease the influx of air depending on the temperature on the street.

When is it worth adjusting the windows "Winter-Summer"?

After adjustment on summer periodThe windows are not so tight. Due to this, additional ventilation is formed through the tribe. Fresh air will come to your room even with a window closed.

In winter, it is meaningless and illogical to let the ice air in the apartment. Not hermetically closed window Creates drafts and reduces the room temperature. In this case, it is necessary to translate the accessories in the winter mode. Which means a more dense fit of the sash to the frame and the preservation of heat inside the housing.

Translate accessories for the winter is better in the last month of autumn so that the cold will not find surprise. After the arrival of heat, pVC windows You can return back to summer mode.

Seasonal adjustment procedure for metal-plastic windows

The Winter-Summer window adjustment procedure is reduced to the control of the pin. Eccentric (it is also called an armof) rotate using a special screwdriver or manually, depending on the window system. At reduced temperatures, the maximum clamp of the trough is used. Adjusting windows by summer Provides for a decrease in pressure on the seal. It increases natural circulation air.

You do not need to understand how to adjust windows for summer, because this is the case of specialists. It is only worth understanding the need for this process.

Professional adjustment of windows "Winter-Summer"

Windows adjustment can be made independently, but for more complex problems It is better to invite a specialist, since an inexperienced and non-felt person can easily be mistaken, which will later lead to the breakdown of the entire window or its fittings.
Our company knows how to regulate windows winter-summer. We professionally and promptly present accessories in the right mode. Trust the window adjustment Winter-Summer Our specialists, and we are without delay, for moderate cost and will qualitatively carry out all the necessary work.

Accessories for plastic windows allows you to adjust their tight closing and, if necessary, configure them depending on the season. However, sometimes even high-quality expensive accessories require repair. In this article we will tell you how to adjust the plastic windows and how can one independently fix the small breakdowns of the mechanisms. To do this, it is enough to know the position and action of the main settings and to have the necessary tool.

Plastic window adjustment tool

Depending on the current problem and the manufacturer of accessories, it will take for repair:

• 4 mm hexagon (there is almost every cyclist in a set);
• screwdriver with labeling nozzles T, TX (in the form of a star), as well as ordinary cross number 3-4;
• passatia;
• aerosol WD-40.

Control points

Consider the popular situations where the adjustment of PVC windows and fittings under winter and summer, as well as tell how to eliminate small malfunctions. It will be described only general technologySome nuances may vary depending on the manufacturer. In any case, it can be found in the instructions.

Repair of window and balcony handles

Sharing the door knob

To fix chatting door handle, you need to tighten its mount. This is the simplest adjustment of the plastic window, for accessing the adjustment mechanism on each knob below, a lining is provided. It is delayed on itself and turn the entire element perpendicularly. So you can see two bolts that are twisted with a conventional cross screwdriver. If the decorative nozzle does not work with your hands, be careful: it is made of soft plastic, it is easy to damage it to a sharp object.

Installation or replacement of handle with lock

If you have children, it is important to protect them from the danger falling into the window. It was for this that special handles with a lock were invented, which will not allow the child to open the window on their own.


To remove the old handle, first remove the decorative nozzle, as in the past version. Unscrew two bolts and pulled out the handle. Then insert a new one in the same position and fix it on the bolts. Replacing the window handle will take literally one minute, the process is shown in the video.

Hences or does not reach the desired position handle

Such a problem occurs for various reasons. Perhaps it will be useful for cleaning and lubrication of all accessories and handles. If the handle closes with a large force, most likely will help adjust the clamping of plastic windows.

To lubricate the mechanism, the handle is pulled out, clean and vacuuming it and the mounting hole. Then it remains to lubricate moving parts with a lubricant liquid consistency, for example, butter for sewing machines. In the presence of corrosion of the surface is treated with WD 40 aerosol.

Information on how the adjustment of the accessories of plastic windows to reduce the clamping of the seas is presented in a separate section below.

If the knob is jammed

If it happened so that the knob is jammed, it is impossible to force it to be folded, having gone out with losses. Most likely, the blocking mechanism has incorrectly worked, which does not allow the window position during the open state. To solve this problem, manually dismissed the lever of the block, located on the end of the sash next to the handle. The block can have two constructions:

1. plate, in the form of tongue fixed to the end, which, when opening the window, changes its position and becomes at an angle relative to the seal;
2. clip, which when opening comes to the seal.

Adjusting the windows of windows in winter and summer

Check the clamp of the frame is very simple: we take a sheet of paper and press it with sash. If the sheet is easy to pull out, it means that the mandatory adjustment is required. If the leaf is pulled out with difficulty, either generally breaks, then the setting is done correctly.

With time sealing rubber It becomes no longer so voluminous as before, and the window can form a slot. However, this slit appears more often during seasonal oscillations, with sharp changes in temperature. To correct this problem, it is often optional to change the seal. Adjustment of plastic windows was performed by twisted specially provided mechanisms.

Setting the plastic windows for the winter and summer is especially important if there are large temperature rings in your region. This reduces the internal stress of construction and accessories and increase the service life of the rubber seal.

If the edge of the sash hurts the frame

When the window has long been in an open state or discovered it sharply / closed, the holding mechanisms can break out or deform. If there are no serious defects, it should help pulling the loops.

If plastic windows have broken, repair is easy enough to do independently without calling the wizard. The main problems with the position and clamp of the sash, loosening the mechanisms are solved literally in a minute with the help of simple adjustment of fittings.

Recently, most people began to change windows with wooden Ramami Thanks to their advantages. However, many of them are not even suspected that additional adjustment of plastic windows may need from time to time.

As a result, even the most expensive and high-quality windows can lose their form not because the installers made a number of gross violations of the installation technology, and because of the ignorance of the hosts about. That this does not happen to detect the reasons for the deterioration of thermal insulation properties.

When additional setting is required?

During the operation of plastic windows, such moments may occur when the flaps cease to feel tightly to the frame and they stop performing their main functions. In the loose connections can be blown by the wind, to fly dust from the street, go warm.

Sometimes you need to adjust windows

Sometimes it happens that the open sash it is impossible to close due to the displaced position regarding the entire frame. And if in the warm period of the year it can somehow survive, then at the occurrence of cold weather there is a decrease in the temperature in the premises and it becomes uncomfortable in them. In such cases it is necessary to hold independent adjustment.

The main causes of the loss of sea tightness

During installation, careful adjustment of all gaps and positions of the sash for certain operating conditions is carried out. However, each material has various coefficients Thermal expansion and occupies a certain space. Installers when installing the most accurately adjusted them under the dimensions of the opening and the frame to ensure them specifications. But when the temperature change on the street, either the expansion of the material as a result of warming, or compression when cooling, can occur. This is especially true of the sash seal.

The concept of operating modes

To the windows can be operated in the cold period of the year you need to adjust them. It consists in the maximum possible pressed parts to the frame seals. It takes into account that the materials are compressed in winter, and when switching to summer they are expanding. When moving from a cold to a warm period, it is necessary to prevent the erase of the coating when opening windows and reduce the wear of the fasteners. That is, you need to reconfigure the winter mode of plastic windows on the summer. If the installation was carried out in summer, then conduct inverse adjustment.

The window can be open in several options.

Is the adjustment provided?

Basically, high-quality windows do not need seasonal adjustment and therefore can be operated for a long time. As for the remaining cases, if there is technical capabilities It is advisable to spend their periodic adjustment. However, in most cases, installers do not report anything about the presence of adjusting screws and do not give any instructions for their maintenance. But this does not mean that there is no such possibility. Therefore, to begin with, it is necessary to explore the stems from the side. There should be special holes for hexagon or adjusting caps with a deepening in the form of an asterisk or having an oval shape. On the bottom loop there must be two, and on the top one. If they are missing, then change the mode will not work and have to change accessories or seal.

Causes requiring changing modes

1. Folds do not open or do not open at all. This is the result of a loop sagging, or the winter position on the adjusting screw is displayed.
2. Through the seals blows the wind and blows dust. If this happened in summer, then it may be necessary to replace the rubber gasket and configure the position of the opening parts.
3. Availability of sagging. Sometimes it may be the cause of loop wear.
4. Displacement of the sash relative to the window in the horizontal direction.
5. Initially incorrectly configured.

If necessary, change the seal

Preliminary preparation

Before adjustment, you must perform the following steps:

1. Washed rag clean all the joints and connections in the end part of the sash, as well as from the side of the contact with the frame. It is important to prevent dirt from entering the internal mechanisms for opening windows and loops.
2. Brush with a hard pile to clean the surface of the fittings.
3. With a driving detail, a dry cloth wipe not only dirt, and the old spent lubricant.
4. Replace seals in case of their substantial wear.
5. Lubricate the adjusting screw for setting the winter-summer special mode silicone lubricantand loops.

Sash adjustment

Before setting up the window modes, it is necessary to install it in the correct position so that in the event of a breakdown or sagging, do not damage the seal. For this, a pencil is taken with a soft rod and the entire perimeter of the sash in the closed position is carried out directly on the frame. At the same time, the power is not desirable not to damage plastic coating. The window opens and the ruler is measured the distance from the line to the frame outrometer around the perimeter. Normal is the position within 7 ± 1 mm. Ideally, it should coincide on all sides.

Due to bad fit, the sash can be cold

Changing the position of the leaf of height

If deviations are observed in height, then the loops remove the decorative plastic insert And with the help of the hexagon, screw the screws at the bottom. This procedure is required before setting the winter mode of plastic windows. If the bottom of the frame is less than in the top, then it should be lifted a little. A suitable screwdriver unscrew the upper screw to the half turn and check the position of the sash. If it is higher than is required, the screw is twisted by a quarter, and in the opposite case - twisted. For the upper attachment, similar actions should be performed to ensure uniform load distribution on both hinges. Adjustment is carried out until the sash is reached the desired result.

How to check the correct setting?

The correctly adjusted window should be freely open and closed without the appearance of the sounds of rubbing surfaces. All screws that are responsible for the vertical position of the sash must be approximately in the same position. Rubber seals After opening the window, should have about the same shape and easily return to its original state. If you need a more accurate setting of plastic windows for the winter, then take a regular sheet of paper and pave it between the frame and sash, after which the shutters closes and try to remove the paper. If this is done, the adjustment is incorrect.

Places for setting

How to shift the horizontal window?

To offset the window in the horizontal direction relative to the frame, the adjusting screw is performed on the upper or lower loop. Looking for a hole under the hexagon, and then by its rotation achieved the necessary position of the window. The offset can be carried out only 2-3 mm in both directions. If the sash is required to move away from the loop, the screw rotate counterclockwise, and if on the contrary, then clockwise. Moreover, the lower adjustment screw is set up when the window is open, and then by closing check the correctness of its entry into the frame.

We carry out the change of regimes yourself

Translate the window in the winter mode is simple enough. To do this, on the side surface we find a protruding pressure roller, with a label on the hat, and rearrange it in the winter position. They are easy to find by turning the handle, since they are moved along the guides. If the mark is from the side opposite to the seal, the clamping force decreases. With summer mode, the mark should look towards the room, and in the winter - outwards. To change the position you need to pull the roller on yourself, turn, and then drown it back. Similar activities are carried out with all the screws with the stamps.

Adjusting the RACF

How often should I change modes?

In most cases, remap the location of the sash and change the modes should not, especially if the window is new and in the cold period of the sash firmly adjacent to the frame. In all other cases, such work should be more common once every 6 months. And be sure to translate them into the summer mode.

Possible consequences of improper configuration

All operations on the reconfiguration of plastic windows must be carried out in accordance with the instructions. Changing the position of all screws in the "Winter-Summer" modes without information about their purpose can lead to a damage of the window opening mechanism, clamping rollers and a rubber seal. Also before adjustment, the technical condition of the windows should correctly evaluate. In the case of increased wear of the parts, it will not be possible to configure the winter mode, but to disrupt the adjusting bolts is very easy. When clamping screws using force, the sealant can save its deformed state and will not return to its original position, which will entail its replacement.

Causes of dispellation of windows

1. The factory defect that led to the cracking of the fittings.
2. Mechanical damage during operation: cracks in plastic, depressurization of the glass unit, the destruction of the stroke.
3. Mounting errors: the slit is remotely mooring, the incorrect location of the window in the opening.
4. Worn inland and external parts during operation.

Loop adjustment

Translate window in summer mode

Setting the plastic windows for the winter should be changed on time after warming. For this, all the screws that have been reconfigured to the winter regime should be rejected into the previous state. However, in the case of the wear of the seal, it is necessary to ensure a stronger pressed sash to the frame. The adjusting nut is unscrewed in the opposite direction so that the label looks inside the room.

Negative sides of changing wind modes

Adjusting screws are essentially shut-off the trimps, which are designed to enhance the window seals. Their adjustment is fraught with the loss of the main properties of the seal and the need to replace it. The trough when opened by the window handle, the guides and eccentrics go for the response planks and provide the profile to the frame. When twisting the screw for the winter, the maximum force on the seal is ensured, and it is in this state all winter. At the same time, it is additionally affected low temperatures and increased moisture. For 2-3 seasons, he can completely lose its properties. If you do not change the winter summer mode, then the seal will be able to serve at least twice as long.

You can perform the setting using the key

Change modes or not?

The answer is unequivocal that experts should replace the regimes, as they possess the relevant knowledge and skills. But it will require additional costs for its call twice a year and time spent. The service life of the sealer will significantly reduce. On the other hand, it is necessary to ensure the maintenance of heat in the cold period and extend the service life of the windows. A dilemma arises that requires the adoption of the right decision from both a financial point of view and ensuring the conditions of maximum comfort. Therefore, there is no unambiguous answer to this question, since each person has its own preferences.

Conclusion

Despite the high manufacturability of the process of manufacturing plastic windows, they require manual adjustment of the use modes. Moreover, it is rather their advantage than a disadvantage, since only in this way you can achieve the most convenient parameters of their use. Changing the Winter-Summer Mode can be achieved as much as possible connection of the sash with the main frame and maintain heat in the cold period, and in summer to ensure sufficient functionality and reduce wear of parts. Timely change of settings will allow to extend the operation of windows.

Winter mode of plastic video windows:

In contact with

See inaccuracies, incomplete or wrong information? Do you know how to make an article better?

Want to offer photos on the topic?

Please help us make the site better! Leave the message and your contacts in the comments - we will contact you and make a publication better together!