German company Buderus, which is part of Bosch Thermotechnology GmbH, came out russian market Not so long ago - in 2004. Thanks to the professional approach to heating system As a single whole manufacturer carries out comprehensive supply of energy efficient heat equipment.

Among innovative products special attention deserve boilers Buderus, specifications which are developed by company specialists for the economical, safe and environmentally friendly functioning of equipment.

A variety of model range

The line of thermal generators of German production is classified by several parameters:

• Mounting (wall or floor).
• Type of fuel used (diesel, gas, electrical, solid fuel and combined).
• View of the combustion chamber (open or closed).
• Heat exchanger material (cast iron, copper or steel).

Simple I. affordable way Integrated to solve the problem of heating and hot water supply is the installation of a two-circuit wall boiler. Heating carries out the bittermic thermogenerator with a flowing method up to 40-60 ° with a capacity of 10-15 l / min. This volume of stream is enough for a maximum of two water intake points located at a short distance from the source.

Representative two-door model - Buderus Logamax U044-24K gas wall boiler is a 24-kW circulating water heater that works with a hard priority for the DHW. Due to the built-in turbine, it is quickly adapted to the required volume of hot liquid of a given temperature.

One-connecting heater is able to provide heating in a complex bundle with a boiler indirect type. For example, the household heating boiler Buderus Logamax U052-28 operates according to the classic scheme: the built-in three-way valve over the temperature sensor "recognizes" the DHW mode and switches the thermoser supply to the heat exchanger. Such a "union" of the equipment guarantees a constant stream of hot fluid from 60 to 200 liters.

1. Gas boilers Buderus is released with different functional characteristics:

• With forced or natural burden.
• Closed or open combustion chamber.
• Superior or atmospheric burner.
• With steel or cast iron heat exchanger.
• Single or two-kinning.
• With a capacity from 7.8 to 270 kW.
• Wall or outdoor.

The cost of Buderus U072 gas boilers can be called a democratic - from 26 thousand rubles, which is 2 times less than the price stationary option Installations - from 61 thousand rubles.

2. Gas condensation boilers They are environmentally friendly and economical compared to traditional. Through the use of additional energy of the allocated combustion products, the flow rate was reduced and the efficiency increased significantly (by 10%). The price range of more advanced energy-efficient models begins from 60,000. Rubles.

3. Solid fuel Buderus are presented in Outdoor traditional option. Aggregates long burning With a cast iron or steel case, you can work autonomously or as a backup in a sequentially connected bundle with boilers using alternative sources.

Gas generators increase the thermal incineration efficiency solid fuel Due to the pyrolysis process of decay organic substances. As a result of complete combustion of coal or firewood, there is practically no allocation of organic gases in environment. The main disadvantage is the price of pyrolysis solid fuel Buderus Logano.

4. Superior can work on diesel or natural Gaze Depending on the type of burner, which is easily rebuilt. In each design, the thermostream technology is used, protecting the heat exchange surfaces from the formation of condensate and thermoshock. The low-temperature floor combined boiler Buderus Logano G215 due to the optimized furnace of the furnace economically consumes fuel, while ensuring high thermal transmission efficiency.

5. Electrical models Silent, compact and easy to use. In the configuration of boilers with a capacity of 2-18 kW comes expansion tank (7 l) and safety valvewhich for more powerful options (22-66 kW) are ordered separately.

Comparative characteristics of boilers from Germany Budyrus

Model Buderus.	Features	Price range, thousand rubles
Logamax Plus GB072.	condensation gas boiler wall performance; presented in 2 versions: one-connecting at 14, 24 kW and double-circuit - 24 kW; providing a DHW using stainless steel heat exchanger; built-in three-speed pump and an expansion tank at 12 l; CPD - up to 109%.	61,9 – 68,9
Logamax Plus GB162.	condensation attachment unit Buderus; 3 Power options - 65, 80, 100 kW; the technology of Alu Plus with the new configuration of the heat exchanger tubes ensures maximum power with minimal dimensions; eTA Plus and Flow Plus systems provide fuel consumption efficiency and maximum heat use flue gases; CPD - up to 110%.	203,0 – 327,0
Logano Plus GB312	stationary condensation gas boiler; compact, with an aluminum heat exchanger; 6 power sizes: from 90 to 280 kW; Low noise and emissions into the environment; CPD - up to 108%.	392,8 – 802,0
Logano Plus SB745	condensation outdoor Buderus with a capacity of 800-1200 kW; compact: The furnace chamber is located on top, and the heating surfaces of Kondens - at the bottom; sound-absorbing channels to reduce noise; 2 reverse links are connected to the separation of high and low temperature circuits; CPD - up to 109%.	1 880,0 – 2 375,0
Logamax U072.	gas wall-mounted device with closed chamber combustion; power - from 12 to 24 kW; uninterrupted work with gas and water pressure jumps; freezing protection; compact.	29,9 – 31,5
Logamax U052.	gas hinged boiler Buderus 7.8-28 kW; single and two-circuit models; closed combustion chamber; bi-Letter Copper Heat Exchanger; the ability to connect to the heat-mall system; KPD - 90-92%.	37,7 – 83,1
Logano S111-2	solid fuel steel unit with a capacity of 12 to 45 kW; coal and coke, 32D and 45D models are designed to use wood; a large loading chamber provides a long burning process; narrow dimensions.	38,3 – 75,8
Logamax E213.	one-connecting electric boiler Buderus with a capacity of 4-60 kW; wall mounting; suitable for any heating system as basic or reserve source heat; 2 types of configuration - with or without expansion tank; KPD - 99%.	41,2 – 70,7

Before buying a boiler Buderus, you need to get acquainted with the main characteristics of the aggregates:

• Type of fuel. The choice of heat source depends on the availability, cost and convenience of use individually for each consumer. Before selecting boilers on the Buderus solid fuel, should be provided special room For equipment.
• Boiler power. This indicator directly depends on the area of \u200b\u200bheated structures and the degree of insulation and is determined by the calculated path.
• Installation type. Wall-mounted devices are compact, do not require a separate room for installation. But higher technical specifications of the Buderus floor boilers allow them to apply them on heat-processing stations capable of providing energy utilities and autonomous enterprises, local heating systems and industrial heating systems.
• Heat exchanger material. The steel thermal transfer element is common due to the low cost and good plasticity of the metal, but it is subject to corrosion exposure and is distinguished by a large volume, which entails fuel overrun. The cast iron has high chemical resistance, but it is susceptible to cracking as a result of temperature difference, and the price is higher. Copper is the most resistant metal corrosion, has low weight and excellent thermal conductivity.

Opinions of users about Buderus

"7 years ago in the village held gas - acquired Buderus Logamax U044-24k. The choice was made by type of installation: the wall does not require a separate room and the installation is simple. Power is enough for home 120 m 2, provides hot fluid for economic needs. "

Anton Pirin, Ivanovo.

"Decided to buy a long burning boiler Budrus in new house from a bar for 150 squares. Bookmarks enough for 12 hours of work - in the morning and evening. There are no extraneous odors and ubiquitous black dust. Connected boiler indirect heating, Now the wood pyrolycress and the house hangs, and water heats up. "

Anna Vanina, Moscow.

"After a long searches for the heating boiler, you made a choice in favor of Buderus Logamax Plus GB072. The house is warm, hot water around the clock. Despite the rather high cost, the condensation unit really allows to save gas consumption - for two years, the bills have decreased by 15%. "

Vlad Yatsenko, Krasnodar.

German company Buderus a few years ago united with famous company in order to start a joint production heating equipment. To the Russian market, the company has emerged only ten years ago, but its products have already established itself from the best side and has good feedback Both specialists and consumer themselves.

Let's talk about the boilers of heating Budrus on solid fuel with thermostat. Consider the main sizes and specifications.

Boilers Budrus: Specifications

Solid fuel heating brands Buderus Series Logano S111-2 are used for the heating of a private house, residential and production premises total area from 50 to 450 square meters.

Boiler Budrus applied to work as in systems with forced circulation coolant (pump for circulation) and in self-made systems with natural circulation.

Solid fuel boilers Budrus can be used in parallel with and, as well as with boilers working on diesel fuel. It is also possible to install and install them in existing systems Heating. Boilers have small dimensions, which will allow you to install boilers Budrus in close living rooms or boilers.

Boys Buderus on solid fuel with a capacity of 32 and 45 kW have a sufficiently deep furnace, length up to half a meter. The housing of the boilers is made of high-quality heat-resistant steel, heat exchanger and firefoot itself from cast iron, it tells us that the service life of the boiler will be at least 15-20 years.

Loading solid fuel in boilers is carried out on top. Just raise the top cover and lay fuel. Firewood can serve as this fuel, as well as coal or coke.

Solid fuel boilers Buderus are equipped with a thermostat having a temperature scale. This temperature controller for boiler The heating is screwed into the boiler housing on the side, the chain to the flap is descended from it, which automatically adjusts the air supply to the boiler.

Solid fuel boiler boiler with top loading and thrust thermostat

With this thermostat, you can set the temperature of the coolant in the water jacket you need the temperature shirt, when the valve is shown. In this mode, one cupmark of firewood is enough for 6-7 hours of operation.

On the facial side The boiler is a thermomanometer, which, if necessary, allows you to monitor the temperature and pressure in the system. To protect against overheating of solid fuel heating boilers, you can purchase a water circuit of the cooling, which is not included in the delivery package.

It is also possible to install gas burner for. When buying, be sure to check the bundle according to the instruction manual for boiler boilers.

How to choose the boiler booler

Everything is very simple here. It is necessary to remember the main part of the selection of practical any heating equipment, knowing it thermal power And the area you want to drop.

One kilowatt power corresponds to heating 8-12 square meters of insulated room, with standard height Ceilings 2.5-2.7 meters.

Budrus represents the line of boilers of the Logano S111-2 series having thermal power 12, 16, 20, 24, 27, 32, 45 kW. This means that for the heating of a house of 100 square meters. The meters are quite enough boiler with a capacity of 12 kilowatt.

Boilers Budrus: Prices on manufactured products

Today outdoor boilers Buderus Logano S111-2 with a capacity of 20 kWs have a price of approximately 50,000 rubles *, and a water circuit for cooling 5000 r. * The cost of boilers Buderus entire depends on the euro course.

Watch the video

Boilers are produced in Germany, which indicates the high quality of the goods, but also the prices are respectively higher than on the boilers solid fuel domestic. But if you decide to buy high-quality solid fuel, then it should not save on it. The German quality of goods will allow you to last your boiler for many years.

* - Prices are indicated as of September 2014

Delivery

Delivery in Yekaterinburg and at the suburbs:

Delivery of goods in Yekaterinburg + 30 km, total value more than 15,000 rubles (and this is almost all goods) is free.

If the order value is less than 15,000 rubles, the shipping cost will be 500 rubles.

Delivery in the Sverdlovsk region:

Delivery of the city for the removal over 30 km is considered at the rate - 10 rubles / km (it is considered in both directions). For example, if your home is located on a distance of 40 km from Yekaterinburg, the shipping cost will be 880 rubles (40 km x 2 x 11 rubles).

Delivery to other cities of Russia:

We deliver the goods for free to any transport company In Yekaterinburg, transportation between cities is paid by the buyer for the tariffs of the transport company.

Together with the order, everything will be sent to the buyer required documents Or will be transmitted to his representative in Yekaterinburg.

Ways of payment

Cashless payment for legal entities.

If you want to pay this method, then when placing an order via the basket, you must specify contact details, as well as in the buyer's comment field to write details of your company. The manager will prepare an account after which contacts you.

Bank card.

Payment of goods plastic card Visa, MasterCard in the office of the company at the address of Krasri 46a of 704. Also possible payment on the Sberbank card is also possible.

Cash.

Payment of cash is possible upon receipt of goods from the warehouse or at the time of delivery.

In the transport company KIT.

This method will be convenient for those who are located in other cities. We have entered into an agreement with the kitot and you can pay for the goods when receiving a transport company in the terminal. Whale pays its commission for this service: 1% of the total amount of the order.

Service of the boiler

The maintenance of the boiler house must be held at least 2 times a year.

The cost for various boilers is different. The price of the service begins from 8000 rubles.

When ordering a mounted boiler house in our company service maintenance for 1 year free

List of works:

• Gas pressure measurement in the feed line
• Measurement and adjustment (if necessary) starting and working gas pressure.
• Measurement of the photocurrent, ionization current (if necessary).
• Checking the control of the burner control.
• Measurement and adjustment (if necessary) pressure w / fuel in the burner.
• Determination of the composition and temperature of exhaust gases.
• Check fuel filter (gas / diesel).
• Check and replace nozzles (if necessary).
• Definition of the CPD of the boiler.
• Cleaning the furnace chamber (if necessary).
• Check sensors and boiler thermostats.
• Check and adjust automation control of the heating contour (if necessary).
• Checking the boiler security group.
• Check the boiler security group.
• Check the fistowner.
• Check the sensors and automation boiler.
• Cleaning the boiler, replacing the anode electrode and gaskets (if necessary).
• Check circulation pumps.
• Checking the mixing node.
• Check the power parameters.
• Checking gas-shut-off valves.

Guarantee

Plant Warranty:

The Buderus manufacturer provides a warranty on all its products 24 months from the date of commissioning, but not more than 36 months from the date of sale.

Warranty as a gift:

If you order a turnkey boiler installation in Buderus66, then in gratitude for your trust in us we will add you another 1 year warranty on equipment from our company.

Documentation:

• Installation instructions.
• User's manual.
• Warranty card.
• Packing list.
• Invoice.

119 151 rub.

Vendor code:
8732204651

Best price

Found cheaper? Call, and we will provide the most profitable personal offer!

Shipping and payment

Buderus Logano G234-38 WS Designed in such a way as to continue to work reliably even at a gas pressure of 10 mbar. It is most reliable and durable when working in low-temperature mode. This has become possible, thanks to the use of special gray cast iron - the unique development of the company Budyrus.

Buderus Logano G234-38 WS - Features of the outdoor gas boiler:

• A new design with a black front panel makes it easy to enter it into any room.
• It is perfect for installation in townhouses and cottages up to 380m2.
• It can only be used for water heating in the heating system and hot water supply.
• It is easily combined with a water heater Logalux ST and SU.
• Comes assembled with a built-in atmospheric burner for any type of gas.
• Simple maintenance, due to the minimum soot formation when burning fuel.
• Smooth adjustment of the temperature of the boiler water.
• Heat insulation with a thickness of 80 mm.
• Adjustable supports for simple alignment Height.
• Flame ionization control and dual magnetic valve.
• The heat exchanger of the boiler is made of cast iron GL 180 m with special fins.

Depending on your requirements, you can complete its control system Logamatic 4211, Logamatic 2101 or Logamatic 2107. Any of them can be upgraded using additional functional modules MM100 / 200, KM200, MC400, MS100 / 200. Compatible with BC30E, RC100, RC200, RC300, RC310 regulators.

Control system capabilities:

• Work in weather-dependent mode.
• Signal control 0-10V.
• Internet connection.
• Control boiler and an indirect heating boiler, recycling line, 3-chassing valve, cascade, heliosystem, mixing valve.

Contemporary outdoor gas cast iron boiler Buderus Logano G234-38 WS characterized maximum efficiency and economy. Its efficiency reaches 92%. Thanks to the compact dimensions and low noise, it can be installed, almost, in any room.

Buderus Logano SK625. -Well low-temperature with high-grade steel heat exchanger, without a burner, designed to work on diesel fuel EL according to DIN 51 603, on natural and liquefied gas or rapeseed oil. The boiler works with all diesel and gas fan burners according to EN 267 and EN 676 or burners having a sign of the CE. The noises are significantly reduced during operation due to the sound-absorbing stand under the boiler, the silencer of flue gases and the sound-absorbing burner casing. The trouble-free installation of the burner of another manufacturer on the plate with drilled holes by holes, any diesel or gas fan burner is allowed to install, the test sample of which corresponds to DIN 4787 or EN 267 and DIN 4788 or EN 676, or a burner that has a CE sign. The burner is mounted on the fixed plate. Plate under the burner with drilled holes You can purchase additional order. If you need to reduce the dimensions during transport, the boiler is possible in a modified version (with a dismantled base frame).

Buderus Logano SK625 Specifications

Buderus Logano SK625.				230	310	410	530	690
Nominal heat production			kw	181-230	231-310	311-410	411-530	531-690
Thermal incineration				193-249	246-335	331-443	437-573	559-746
Length			mM.	2396	2396	2615	2615	2651
			mM.	1835	1835	2015	2015	2015
Width			mM.	920	920	1015	1015	1100
Height			mM.	1615	1615	1713	1713	2050
			mM.	1385	1385	1483	1483	1820
dimensions		Length	mM.	2396 7)	2396 7)	2615 7)	2615 7)	2651 7)
		Width	mM.	710	710	805	805	/890
Support Rama		lGR.	mM.	1716	1716	1895	1895	1895
		bGR.	mM.	710	710	805	805	890
Flow gases		DAA.	DN.	248	248	248	248	297
		haa.	mM.	1115	1115	1230	1230	1488
The combustion chamber		Length	mM.	1650	1650	1830	1830	1830
		Diameter	mM.	500	500	600	600	700
Door of the burner		Lt.	mM.	235	235	275	275	310
		HB.	mM.	450	450	487	487	569
Tube burner, minimal depth			mM.	280	280	320	320	355
The feed line of the boiler1 "		Vk.	DN.	80	80	100	100	125
Return line boiler 1		RK	dN.	80	80	100	100	125
Feed Safety Line2 "		VSL.	dN.	32	32	50	50	50
VK / VSL / RK flange		HF.	mM.	1480	1480	1577	1577	1898
		AI	mM.	516	516	695	695	696
Weight 3)			kg	889	927	1199	1247	1564
Water volume				717	702	803	774	1158
Gas volume				443	454	666	691	971
Flue gas temperature 4)		° C.	139	141	134	137	141
		° C.	157-180	157-187	151-179	154-179	157-188
WEIGHT STOP of the flue gases	Diz-Thal	kg / s	0,0628	0,0845	0,1121	0,1452	0,1889
		kg / s	0,0819-0,1057	0,1044-0,1422	0,1405-0,1880	0,1855-0,2432	0,2373-0,3167
	Gas	kg / s	0,0631	0,0848	0,1125	0,1457	0,1896
		kg / s	0,0822-0,1061	0,1048-0,1427	0,1410-0,1867	0,1862-0,2441	0,2381-0,3178
Size of the boiler			230	310	410	530	690
Content	Diesel fuel	%	13
	Gas		10
Required pressure (thrust)		PA	0
Resistance to the gas tract			1,20-2,00	1,15-2,35	1,55-3,00	1,85-3,35	2,15-4,05
Heating temperature of the coolant to 6)		° C.	115
Permissible excess working pressure		bar	5
Certificate of DGRL.			Z-FDK-MUL-01-318-302-16
CE sign, Ident Product number			CE-0085-AR 0449