It can often be seen in the interior of houses. plaster bas-reliefs on the wall. Or cute figurines from similar material, chic candlesticks and much more. This beauty always delights and makes you want to have such decorative elements in your home. This raises the question: how much does it cost and is it possible to make such beauty with your own hands? Sure. There are a few simple options making plaster figures. This article will provide guidelines to help you understand how to make plaster flowers at home.

The first option: from artificial flowers

To make flowers at home, we need:

• Artificial flowers.
• Powdered gypsum.
• Dyes for flowers.

All of these items can be found at any hardware store. Flowers can be from any material. These can be either specially purchased or unnecessary, from any outdated compositions.

First you need to prepare workplace where the production of flowers will take place. Prepare gypsum according to the instructions on the package. Stir the solution carefully and slowly so that bubbles do not appear. You can add the dye directly to the mixture to get a fully colored flower. Attach a wire to the prepared flowers for easy hanging for drying. artificial flower completely immersed in plaster mix... We take it out carefully and hang it to dry.

After our gypsum flower has dried, you can additionally paint over it, add sparkles or artificial dew drops. After finishing the decoration, you need to varnish the product.

Second option: we use silicone molds

It is also very simple. Thanks to a simple process, children can be involved in work. Such a plaster flower will rightfully take its place in the children's room, and the child will be able to show it to his friends. For work we need:

• Plaster or alabaster.
• Paints.
• Silicone forms flowers.
• Paints and items for decoration.

As in the previous example, all necessary materials can be purchased at the store. Pour the prepared mixture into molds. You can immediately attach pieces of thread if in the future you want to hang the products on the wall. After drying, we take the flower out of the mold and decorate it with paints, sparkles, rhinestones, etc.

Bas-relief on the wall

To decorate the walls, many resort to bas-relief. If you want to do everything yourself, you need to be prepared for the fact that this is a very time-consuming process. It may be better to use the services of professionals. If you decide to make flowers from plaster on the wall yourself, then you can use stencils and forms that are sold in hardware stores. Following the instructions, we bring our work to life.

This composition will look amazing in your room and bring style and richness to the interior. You can also make a wall composition yourself, without templates and shapes. To do this, it is enough to cut out the necessary details of flowers, leaves and additional accessories from cardboard and foam. Plaster everything up and use glue to assemble the bas-relief on the wall. If the details are pretty large sizes, then you need to put a wire inside, it will act as an armature. Small parts can be molded by hand and can also be attached to the wall. These can be small leaves, berries, bunches of grapes, etc.

The next step is to seal all the seams. They can be hidden with plaster or white sealant. We process the finished product with a primer, it will not allow the bas-relief to get dirty and crumble.

Garden sculptures

When summer comes, we all try to decorate ours household plots, summer cottages or houses - we plant flowers and purchase all kinds of figurines or lanterns. Can be made decorative flower do it yourself, which will add extra chic to the landscape. In order to make a large garden flower from plaster, we need to purchase the appropriate material and mold for pouring.

We can also use children's sand pyramids. After our flower hardens, we take it out of the mold, grind it sandpaper and paint acrylic paint in several layers. If necessary, add sparkles or rhinestones, which we glue with glue, and complete the whole process by applying varnish. Our plaster flower is ready.

Such sculptures will complement live composition on a flower bed or will be a wonderful decoration of the porch. You can beautifully arrange playground for kids. As shown in the photo, plaster flowers will fit beautifully into your landscape design.

Crafts from plaster flowers

Do-it-yourself flowers in plaster not only look gorgeous in themselves, but can also be a component of many compositions. For example, you can decorate a photo frame with many small plaster flowers, or create a beautiful candlestick in the form of a blossoming flower.

A flower plaster stand can be a great housewarming gift. With such colors and additional elements to them you can issue interior arches or cornices. Caskets or jars for all kinds of women's little things look very nice. If you make the lids of jars for small things in the same style, they will look harmonious on dressing table in the bedroom.

Dried flowers in plaster

For the manufacture of gypsum flower arrangements not only molds and artificial plants can be used. Dried flowers prepared in advance are also perfect. Did your loved one give you a bouquet of gorgeous roses? Over time, the flowers will wither and fall off. To preserve it for a long time, flowers can be dried and used for interior composition:

1. Dilute in warm water gypsum to the consistency of sour cream.
2. Dip each flower in the solution and hang it on a rope to harden the plaster.
3. After drying, the bouquet can be colored and the flowers can be brought into their proper form.

Now it is enough to put the composition in a vase, and your bouquet will stay with you for a long time.

On New Year's holidays, you can decorate the house with themed crafts. Plaster the pine or spruce branches and decorate a New Year's wreath with a beautiful candlestick and New Year's toys. This decor element can be placed on a chest of drawers or fireplace. Involve children in the work, this will help develop fine motor skills hands, develop a sense of color and aesthetic taste.

Recently, the increasing popularity in decoration own home is gaining plaster decor... Gypsum is ideal for craftswomen, because it is very easy to work with it. In addition, gypsum is an environmentally friendly material that is absolutely harmless to humans. There is not even the slightest percentage of toxicity in it, so even your child can work with it. The method of working with plaster is simple to disgrace - artificial flowers must be lowered into gypsum mortar and then dry. But it is worth remembering that gypsum hardens very quickly and you only have a few minutes.

Delightful Plaster Floral Decorating Ideas

1.The less plaster you use, the more beautiful the decor will look.

2. Plaster flowers look delicate and beautiful. Also, these flowers can be dyed in any color using fabric dye.

3. Looks incredibly impressive!

4. From plaster and water it is necessary to prepare a solution of the consistency of sour cream. Prepare the mixture right away in a small bowl where it will be convenient to dip the flowers.

5. You can use not only flowers, but also leaves.

6. It turns out incredible!

7. See how beautiful plaster flowers look!

8. If you don't like the look of the flower, you can paint and varnish it after the plaster is dry.

9. Gorgeous decor of a frame for a photo!

10. Autumn composition of leaves.

11. Plaster is a truly magical thing. Everything that we make of it turns out to be a priori extremely elegant.

Additional master class on how to make a candlestick using plaster

You will need:

• artificial flowers
• wire cutters
• glue gun
• metal based tea candles

We start manufacturing:

1. Wipe the artificial flowers with a damp cloth - they should be clean.

2. Free the flower from the stem and remove the small petals in the center.

The article discusses one of the most original and time-consuming ways to decorate the walls of an apartment: artistic modeling. It is believed that this phenomenon belongs to bygone eras, but reality shows that molding is also used in modern interiors.

Modeling in the interior

Modeling on the wall is considered an original, albeit not a popular option for decorating a home. Despite the large number of alternative and artificial products, classical art modeling has not yet lost its relevance.

What is stucco on the walls

Stucco molding and bas-reliefs on the walls are a way to decorate a room in an original way and add general view some charm.

Contrary to numerous misconceptions that stucco molding is not only expensive, but also difficult technological process, in fact, this is affordable way decoration that any patient and imaginative master can handle.

Stucco moldings on the walls are patterned, figured and, in general, artistic decorations that can be made from various materials.

Stucco molding on the walls in the apartment: where you can use

Stucco moldings on the walls in a modern apartment can be used in a variety of ways. First of all, these are, of course, living quarters, where such decoration takes up vast space on the wall. If desired, it is possible to vary the size and volume of the decoration, however you like. Stucco molding is less common in rooms for other purposes, such as, for example, a kitchen or a bathroom, because in such places there are more important role plays practicality, not aesthetic qualities.

How to make stucco molding with your own hands at home

It is quite possible to make stucco molding on the wall with your own hands, even without having construction skills or art education.

However, before starting this process, you will need to make preparations. This implies, first of all, the preparation of the surface of the wall, which it is desirable to level, and without fail priming and dusting.

Material selection

To create volumetric images on walls designed to serve original decoration the interior will need to use any plastic material. Among possible options you can note:

• Gypsum.
• Plaster.
• Clay.
• Alabaster.

The choice of material is carried out, first of all, starting from the cost of the material, as well as its characteristics.

Forming a sketch or wireframe

After the wall has been properly processed, and the material for sculpting has been prepared, you need to worry about the formation of the sketch. It should be noted that the sketch will be one of the most important points in the process under consideration, and it also affects the success of the entire decorating operation.

• To create a sketch and future stencil, you can use thick paper or cardboard.
• The required image is drawn, copied or printed on a sheet, and then cut along the contour.
• After that, it must be placed under a film, cellophane or other similar coating. The resulting product will serve as a stencil for future modeling.
• Attach the cut fragment with the necessary contours to the right place to the wall and using, for example, a pencil or other similar tool, push the contours of the image into the layer of putty.

Plaster molding on the wall

Gypsum is a ductile and flexible material that can be shaped into any shape; it hardens quickly. Before applying, the gypsum is poured with water and mixed thoroughly, after which, armed with a scalpel with a knife and a wire with shapes, you can start making gypsum modeling on the wall with your own hands.

Desiccation

Gypsum is prone to accelerated hardening, so it is not recommended to carry out complex parts that require lengthy production. The duration and peculiarity of the drying process also depend on the thickness of the solution.

Opening with varnish

Final finishing will require security protective coating... This is necessary not only to preserve the aesthetic qualities, but also to protect the molding from shedding and destruction. Opening with acrylic varnish is considered one of the best options in this case.

Examples of stucco molding in the interior of the room

Stucco molding on the walls in modern apartments can be absolutely varied. It depends not only on the imagination of the owners or the master, but also on:

• area allotted for decoration;
• selected materials;
• characteristics of the room and some other factors.

Flowers

Flowers, vines and plant images often become images used in stucco molding on walls. As a rule, they are simple to execute due to the symmetry of the shapes and the simplicity of the lines.

Animals

The fauna is a less common motif in images created by stucco molding, since it does not fit into every room, and the involvement of a master will be required to create high-quality works.

Geometry

Geometric lines, shapes, intricate patterns are original way decorate the wall of almost any room. These patterns are neutral and fit into most interiors, besides, they are simple to create.

Antique figures

They are among the most complex images. To create them you will need not only experienced master, but also quality materials, good tools and a competent preparatory process.

What do-it-yourself stucco molding on the walls is the fastest

As already mentioned, gypsum is one of the most "fast" materials, despite the fact that it requires a certain skill. It is easy and quick to apply, requires a minimum of effort and tools, and also quickly hardens.

What to consider

Depending on the specifics of the planned work, a list of advantages and disadvantages is determined, with which you should first familiarize yourself and make a decision.

Care

Decorative sculpting requires regular maintenance, but it is not an easy process. It needs to be washed with soft detergents not containing abrasives or acids.

Restoration

The restoration of stucco molding is carried out using the same materials that were used to create the pattern, in case of major damage. For smaller and minor defects, you can use gypsum or putty. Individual elements if necessary, cast separately or formed after applying the mixture.

Stucco molding on the walls is one of the most original and exotic ways to add solidity and originality to the interior.

Useful video

Plaster decorations will add personality to your interior design. In addition, stucco molding can be used quite widely, in different styles room decoration. In the article we will tell you how to make plaster moldings with your own hands (at home), we will give step by step instructions for manufacturing.

Shape selection

The variety of plaster moldings today is not limited to the creation of figurines of thick-cheeked cupids, graceful lines of flowers and petals, indoor cornices. Using this material, you can create an imitation of a fireplace, "grow" a tree on vertical surface walls or ceiling. The figure can be classically white or painted in various colors. The choice is determined by the wishes of the customer.

First of all, you need to decide on appearance future work of art, its size, location. The best option- making a stencil of natural size or drawing a pattern on the surface to be decorated.

The options are endless. The simplest is stars, flowers, snowflakes, letters. You can decorate the room with original volumetric paintings - landscapes, still lifes. "Carved" frame will allow you to achieve a complete imitation.

Solution

For casting large gypsum products, the solution is prepared in small portions. A thick solution pours poorly and does not completely fill a form with a thin relief.

An adhesive solution - gelatinous, flesh, can slow down the hardening reaction. A 25% concentration of "glue water" is recommended. It must be used within one day. In addition, the application adhesive solution gives strength to products.

Flat products are rubbed to a flat surface, sprinkled with fine gypsum flour and left there for a day.

Manufacturing

Plaster molding can be made in several ways.

1. The contours of the future composition are drawn using stencils. Gypsum mass is applied to the surface, leveled, rubbed. Then all unnecessary is cut off. The procedure is repeated if necessary. This method is suitable for creating stucco with a fairly simple surface configuration.
2. A solution is applied to the location of the stucco molding. Then the dried gypsum is processed according to the drawing.
3. Products of complex configurations are made using molds. They can be made of wood, plastic or concrete. First, the form is abundantly greased with soapy gruel. Then plaster solution is poured into it in layers. The maximum layer thickness is 1 cm. The next layer is poured only after the previous one has completely solidified. A well-cured product is gently released from the mold.

In addition, you can make the entire model or its fragments from plasticine. This material can change shape an infinite number of times. The gypsum solution is applied to the finished plasticine decoration with a brush. Careful smearing of the grooves is a guarantee of the accuracy of the shape of the future product. Further layers are applied with a spatula only as the previous ones dry.

After an hour, the mold is removed from the plasticine model. When creating products large forms it is reinforced with a copper mesh. WITH inside finished form covered with colorless furniture varnish.

When pouring gypsum mortar into a mold, it is necessary to avoid the appearance of air bubbles in it. Shaking lightly will ensure that fine reliefs are completely filled. Drying of gypsum products should be carried out at a temperature of at least +16 0 C. After thawing, they are destroyed. Do not try to speed up the drying process with a fan, heating appliances- the plaster will warp.

Disadvantages are eliminated with a knife, then the product is sanded with fine sandpaper.

White gypsum surfaces can be painted with water-based paint. Before that, it is covered with two layers of primer. With the help of pieces of cloth, sponge, synthetic materials you can give the stucco molding any texture.

Surface preparation

The place of installation of the future product is completely thoroughly cleaned, washed from whitewash. A notch on the back and mating surfaces will help hold the bonding solution more firmly.

Small lightweight parts can be fixed with liquid plaster.

Large elements are mounted using special fasteners. Holes are drilled in them and in the surface of the wall or ceiling, into which, using dowels or wooden inserts screws are attached. Metal loops are fixed inside the plaster products. During installation, they are put on the screw heads. The varnish coating will prevent the appearance of rust on the metal of the fasteners.

You can install metal pins into the wall, then they are pressed into the holes of the stucco molding, filled with a liquid solution.

Before planning large compositions, it is better to practice making small figures. You can also make a decoration from individual modules.

Video

So, using a wooden typewriter, you can make a simple plaster stucco on one's own:

Photo

For the first time I got to know the plaster decor closely in Paris. There, on one of the shelves of small cozy shops on Rivoli, I saw a lot of beauty: from cute trinkets to works of art. But my gaze caught on a delicious plaster decor in the shape of a flower and stunning candlesticks in the form of blossoming roses.

My modest budget gave me the opportunity to fork out for just one such plaster rose. And five months later, when my husband and I were buying materials for repairing the ceiling in the living room, I saw plaster cast in one of the departments of the store. And then an idea struck me!

Plaster decor

Why not create such stylish plaster flowers... I will not keep intrigue and torment with the expectation of a magic recipe - the method is outrageously simple. For the base, dry or artificial flowers are needed, which must be dipped in a plaster solution and then dried. The process is a little time consuming, but the result will definitely please you.

Due to the fact that gypsum is an environmentally friendly and absolutely harmless material for humans, in which there is not the slightest toxicity, even a child can cope with such work. For example, my daughter Maria is now very interested in this kind of needlework.

Editorial staff "So simple!" prepared for you 11 delicious floral decor ideas from plaster. Gorgeous and very simple!

We also prepared a simple master class on making unusually beautiful candlestick in the shape of a flower.

You need

• gypsum plaster or plaster
• artificial flowers
• pliers
• glue gun
• tea candles-tablets

Manufacturing

And here's another just adorable idea for you in your piggy bank: how to create on clay. When you get to know the technology, you will understand that making such beauty is much easier than it seems at first glance!

You see what can be obtained from old or just low-quality artificial flowers. Gypsum is truly a magical thing. Everything that we make of it turns out to be extremely elegant. Flaws are even welcome. After all, this is aristocratic and creative negligence.

Unusual plaster decor looks pretty impressive and can be safely used as a background for beautiful photos, for example, those that you post on Instagram.