The table is an integral attribute of each house that allows you to create comfortable conditions for life. But many residential apartments Can not be placed inside a full-fledged design, since this piece of furniture takes a lot of space. Correct-transformers will help correct the situation, which can be disassembled or convert to another product if necessary. Before making a folding table with your own hands, it is important to pick up optimal design and the functionality of such a design. This will optimally enter it into the interior, making the most useful and in demand.

Features and advantages of table clamshells

The folding table is a design that consists of several independent elements. All elements of the system are connected to each other special fasteners, which makes it possible to disassemble it when necessary. A classic representative is a table that the countertop is moving away, and another part is inserted into the liberated space.

Tables of this type have several positive sides:

• Functionality. The table can change its dimensions, which allows them to increase if necessary (the arrival of guests and so on). In this case, this system is very easy to add drawersTo be used as an additional storage location.
• Small dimensions. The design is completely disassembled, which allows you to keep it in a storage room or on the balcony. The size of the table itself is characterized by compactness and practicality.

• Originality. Almost all tables that are manufactured manually have no analogues on the market and are distinguished by many details.
• Practicality. The table can be installed both in the kitchen and in the living room, transforming its size. Such an approach also saves quite a lot of space, which is important for small apartments.
• Reliability. The service life of the design can be very long if the drawings and use high-quality fittings.

Materials

The quality of transformer tables depends in many respects from the material from which they are made. Today, to construct such systems use:

• Chipboard. The stove is distinguished by strength and low cost, so it is very often used in the manufacture of such furniture. To give the table attractive design, You can make it from LDSP.
• DVP. This material is largely similar to the previous type of product. The stove is perfectly processed and practically harmless to humans.
• Wood. Tables made of massif are the most durable and expensive. The material is convenient in operation, and also features a unique texture that you can pick up for any style at home.
• Plywood. This product is not used as the main one. It makes auxiliary elements (shelves, rear walls, drawers and more).
• Metal. This material is one of the most durable and durable. It is used for the construction of parts that are subjected to significant loads (metal legs and so on). Very often used here profile pipes of different sections and shapes.

It should be noted that today many details for tables can also be manufactured from polypropylene pipe, Glasses and other similar materials.

How to independently make a folding table-transformer?

Transformer tables are several species, as they are used to solve various tasks. The algorithm for creating such structures consists of several consecutive actions:

• Initially, you need to decide on the type of product. Today there are great popularity to beds-beds or tables-sofas. The next step is to create drawings with all the structural elements. Optimal option There will be the use of ready-made plans.
• At this stage, the selection of materials and fittings are performed. Transformer mechanisms are several types. They differ in the fastening method and the parameters of spatial movement. For example, the bench table should have not only sliding, but also lifting mechanisms.

• When all materials are collected, proceed to the manufacture constructive elements Tables (countertops, legs and so on). It is important here to carefully customize all sizes so that the future system can move without effort and failures.
• The table assembly procedure is completed. Start all this with small elements that are not transformed as minimal. After that, switch to large systems, where rotary sliding mechanisms are already installed. In this case, careful measurements are performed before fixing each element.

The process of constructing tables-transformers can be both light and difficult. It all depends on your imagination and desire. Sometimes you can simply attach the transformer wheels to change its purpose and functionality.

Making a swivel-fold model

Swivel -Rasklad tables are systems that have a tabletop can shift toward parallel to the floor. This design is much more complicated than the usual folding model. Special loops and mechanisms that provide this functionality are used.

The algorithm of the construction of a similar design can be divided into several consecutive stages:

• First of all, you need to spend thorough calculations of the desk book. It is desirable to use ready-made drawings on which all major sizes are applied.
• After that, the material is selected that can withstand many turn cycles. The optimal variants will be metal and natural wood.
• When everything is ready, the framework and countertops under the table are manufactured. The upper part must be completely closed with one element. The second table top will be hidden under the table. After thorough measurements, the cover is screwed to the frame with the help of special transforming mechanisms. It is important to control the location of all structural elements.

Please note that the second lid can be attached to the first element by forming a kind of book. A similar table with a folding countertop is much more convenient and practical.

Homemade folding wooden table to the wall

Wall tables are one of the passed tables of Amone optimal solutions For small kitchens. These designs do not occupy a lot of space, which makes them very functional. The construction of such a design involves the execution of such operations:

• Initially need pick the material for the table top.Many today use chipboard sheets for this, but the best tree is best, as it is durable and beautiful. The shield can be knocked down or glue from several polished boards. After this, you need to determine the height of the table. Based on these values, 2 support legs are manufactured. Theoretically, they can be adjusted under height after fixing the lid to the wall.
• At the very end of the countertop fasten to the wall.For this use special rotary mechanisms. Please note that the product should not close to the support, as it cannot be closed. When the cloth is screwed, you should take care of the fixation system in a vertical position. The process of installing legs is completed. Fasten them to two corners using rotary systems.

If you wish, you can make legs removable.

Coffee table in the hall

A feature of this table is its small size. Externally, a similar design can remind coffee table. Today there are many options for such products that are characterized by design and technical equipment.

Consider how to build a table for living room with your own hands. This procedure consists of several consecutive stages:

• Initially, you need to choose materials. The optimal option will be wooden plank and timber. Of these, you should create a frame under the tabletop. Externally, it resembles the usual square or rectangular table, only without a lid.
• After that, cut out of the boards and form two countertops. One of them should be less and placed inside the frame (it will be hidden). The second lid is manufactured as for a regular table.

• Build construction begins with a small tabletop inside the table (between the legs). To do this, use a special mechanism that is capable of moving the system to the top if necessary. The countertop should look like and shift simultaneously into one of the parties.
• When the lower web is fixed, the top countertop is embedded in a similar way. It is attached on special levers that allow you to lift and move the system.

Please note that the upper part must be shifted in such a way as to enable the lower shelf and set it next.

Features of the creation of a round

Round folding tables today are of great popularity, as they differ in originality. Technically, such a design can be supplemented in the middle insert, which will increase its dimensions.

Creating a semicircular table involves the manufacture of a circular table top. This process is quite simple and consists of such steps:

• Initially, the paper draws a layout of a future design. You can do this in different ways, but often use thread and pencil, which is fixed on one of its ends. The second end is simply placed in the center and hold, and the pencil is moved to the stretch.
• After that, with the help of the workpiece tolerate the circle on the boards folded together. Some experts alternately cut out parts, inflicting the dimensions of the board on a certain part of the circle.
• When the countertop is cut, it is glued or knocked down with the help of transverse bars. After that, it is necessary to cut it strictly in the center of the circle to form two smooth halves. The procedure is completed by installing these elements to the table frame using the movement mechanisms.

Hiking table-suitcase

A similar design combines not only the surface for food, but also the storage capacity of certain things that will be useful in nature. To build such a table relatively simply and this can be done in several stages:

• Initially, you need to pick up bars for the frame. The capacity of the suitcase will depend on their thickness. The optimal option will be a rectangular bar, about 4-5 cm thick.
• At this stage, the parties are constructed. For this, brucks are knocked down rectangles of a certain amount. It is important to carefully fit all the ends to get smooth and not overwhelmed parts. Then, a sheet of plywood is nourished to one side of the frame, which will act as a tabletop. As a result, two small drawers with a closed bottom should be.

Wooden folding table with your own hands, drawings, schemes, detailed description Products whose feature is a side of the bottom of the table top, where the legs are hidden in the assembled form.

Let's look at the design of the table in the context, where the assembly units of the product are depicted:

1. Table lid (table top).
2. Frame (carrier frame).
3. Legs.

Table of table. and its main dimensions Shown in the figure.

Table cover

The countertop is made of glued wooden skulls interconnected on the rail. On the perimeter of the lid is fixed by "P" a shaped aluminum furniture profile in size 2 x 20 x 20 (mm).

Reference:
When connected wooden details furniture Shield On the rail, you should follow the following dimensions:

BUT - Wood width of a wooden furniture shield
S. - Wooden furniture plank thickness thickness
SO. - Shield thickness after machining
Sp. - Pasting for mechanical processing
Sh - Edge thickness
SI - The thickness of the groove and rail
L. - Width Reiki
LI - Groove depth

A \u003d 12 ... 150 (mm)
SO \u003d S - 2 SP \u003d A ... ⅓ a \u003d 12 ... 60 (mm)
SP \u003d 2 ... 3 (mm)
Sh \u003d si \u003d ⅓ so
L \u003d SO.
Li \u003d ½ L + 1..2mm

Carrier frame

Comprises:

1. Cross Tsarga.
2. Longitudinal Tsarga.
3. 7 x 50 (mm).

The inner surface of the transverse king, along the entire length, is plane at an angle of 10 °. FROM inner Longitudinal Tsargi, two recesses for fastening metal corners. Longitudinal and transverse tsargi connect with each other with Evrovintage (confirm).

Legs

Consist of:

1. Leg.
2. Crossbars.

The crossbars are made of wooden cuttings Ø 16 (mm), which are inserted with a small tension in the holes of the legs, pre-on the surface touch of parts, is applied fine layer of glue.

Wooden folding table with their own hands or the order of assembly according to the drawings:

1. Prepare the necessary material.
2. Let's make assembly details.
3. We collect assembly units.
4. We produce finishing processing of assembly units and apply a decorative paintwork.
5. Tree screw screws 3.5 x 16 (mm), we will attach a four metal corner of 26 x26 x30 (mm) to the bearing frame.
6. The legs will be attached to the carrier frame, with a small tension bolts furniture with a semicircular head and a square headrest 10 x 50 ... 60 (mm) according to the "Bolt - Washer" scheme.

The figure shows the design of the carrier frame with legs folded.

Many of us love to go to nature, while we take with you a lot of home equipment - pans, plates, forks and much more, as well as poisoning food. By tradition, we begin to cook, or simply begin to get ready-made food from bags and other devices, and immediately the question arises where to put it all? Some will prefer the option with a conventional tablecloth, laid on the ground, which is not entirely convenient for me, and unforgettable about local insects, which will heat try to try brought.

The author of this article suggests us with you to make a convenient folding table, which is clearly better than the written method. The work is not difficult, everyone can cope with it. And, probably, the main advantage of this work will be that the table will not occupy a lot of space during the transportation of him to the place of rest, as it will be foldable.

For a homemade table, the following will be required.

Tool:

Wood hacksaw;
- roulette;
- line;
- pencil;
- sandpaper;
- construction stapler;
- a hammer;
- Drill.

Materials:

Round wooden stalk, a diameter of 2 cm, 120 cm long (you can take thicker, but it is already at your discretion);
- 3 pcs. reduction (for the table and fixing element) with a length of 2.5 m, with a cross section of 1 x 5 cm;
- 4 things. transport bolts;
- 4 things. brass cutting nuts - inserts;
- nylon flat cord with a length of 120 cm;
- Building brackets 6 mm.

Let's start with the fact that you can't fit the feet for the table, four equal parts should turn out, each 40 cm.

Next, we take the skull, which we will use for the table top, cut them in the amount of 10 pieces, the length of each 60 cm, for this we use the existing one cutting tool. Then you need to freeze two more billets as 60 cm, they will continue to be used as a fixing element for the table top.

When all the details are unlocked on the parts we need, we produce grinding, we remove and spin sharp edges, we use sandpaper.

Next, you need to prepare a flat nylon braid, for this cut off two sections of 60 cm each each, then with the help of a lighter you need to burn the edges - so that with the time of the edge it is not broken.

Now we take all the rails that we left for the countertops, we declare them hardly. Between them, it is necessary to leave a small gap, it must be united along the entire length. To do this, use a small wooden lump, which we substitute in the gap on both sides.

Then we take the prepared nylon braid and lay it throughout the entire length, then with the help construction stapler We begin to fix it to the skulls, if the stapler poorly breaks the rail, you can use the hammer as an additional drum force. After that, we carry out the same operation on the second side of the table.

Next, we take a drill and make a hole in four corners, as shown in the photo, insert the transport bolt into this hole.

After that, we take two locking strips and put them on across the table tops, place and drill through holes, Insert the bolt.

We turn to the manufacture of legs.
We take the legs, and in each of them we find and mark the middle, then with a drill we make a hole, using a drill with a diameter of 7 mm, the depth of such holes should be 25 mm. In order to be more convenient to drill - clamp the legs into vice, winding them with a soft cloth, this is not to damage the wood.

When all the holes are ready, we put the bushings with internal threads.

Next, you can screw the legs, the following should be obtained.

If you wish, give the table more bright colorUsing the veil, varnish, paint or other type of coating.
As a result of all actions, we get this simple in the manufacture of a picnic table, which is easily assembled and disassembled. For such a table, you can sew a special case in which it will be easily transferred.

The cost of the square meter of residential area is now only grows. Construction companies initially build a lot more small apartments, with an area up to 30m2. In such apartments each square meter on gold weight. It is for you, the inhabitants of such small flat apartments I decided to make a selection of 11 original ideas Folding tables with their own hands.

1. Children's table for classes

In the closed form, the table serves as a chalk drawing board.

2. Table-picture

For adults, for whom the board for drawing chalk is not so important, interpretation is possible in the form of a picture.

3. Folding table In workshop.

For lovers, dig in the garage, there is also an option using a table as a cover, as well as the table top itself.

4. Portable pillar

The table does not have to be stationary. Options C. portable tableswhich can be mounted in the wall as a mirror frame are also present.

5. Little shelf for work

An excellent option for those who do not need a lot of space for work.

6. Laptop table in modern style

7. Table bed

Some private workshops manufactures whole complexes that combine bed and the table at the same time. The space is very saved.

8. Suitcase table

Suitcase type tables are often found quite often. In addition, in the wall you can make additional fasteners for bottles. And it will be kinda, bar counter.

9. Table for the sofa

Lovers drink tea on the sofa will appreciate. Very convenient, put a hot cup on such a table. No need to burn your fingers!

10. "Advanced" peeling table

A more advanced version of such a sofa stand.

11. Kitchen "Table in the Wall"

Variation of tables that can be folded at the right moment for kitchens.

The folding table may accompany you in tourist campaignhelping to receive guests on cottage plot, Be a stand at the exhibition or even the counter in the store. Multifunctional I. useful thingwhich is also very optional to buy, but can be made own hands. I offer 2 master classes how to do it.

Master Class No. 1: Folding Table

Before making a folding table with your own hands, you need to get everything necessary:

Necessary materials and tools

Photo	Name
	One round barhaving the following dimensions: Length - 1200 mm; Diameter - 20 mm
	Three parquet boards 50 to 6 per 2000 mm; One parquet board 25 by 6 per 2000 mm
	Four transport bolts
	Four rowing nuts insert from brass
	Flat nylon cord
	Mounting stapler with sixmillimeter brackets
	Handsman on a tree
	Sandpaper
	Drill with drillsdiameters 6 and 7 mm
	A hammer

Stroke work

Prepare everything you need, proceed to the manufacture of a reassigning table with your own hands:

Picture	Description
	Saw round Barlok. on 4 equal parts
	We saw parquet boards So that resulting in: 10 segments of 50 mm wide and 600 mm long; 2 segment 25 mm wide and 600 mm long
	Slimming emery paper Cropped edges of the resulting segments of a round bar
	Slimming emery paper Cropped edges of the resulting segments of boards
	Preparing a nylon cord: Cut off from him two pieces of 600 mm long; Outliftedtheir edges lighter so as not to bloom
	Lay out a plate On a flat surface point side Up, placing the separators of the same thickness between them
	Connect the boards nylon cord, retreating a little from the edge and fixing it with a stapler brackets
	Strengthen the fastener several hammer blows, if the stapler was weak and could not drive the brackets to sufficient depth
	The second segmentnylon cord fasten the boards on the other hand and get an almost finished tabletop as a result
	Drill holes In the corners of the table top with a diameter of 6 mm
	Insert the bolts in the resulting holes
	Install the crossbars: Stay along the fixed cords, retreating to the edges of the table top, the boards of 25 mm width; Celebrate projection holes on them; Drilling; Wearon the bolts
	Prepare legs: Fasten In the vice one of the four round bars; SemiMillimeter drilling drilling in his end hole with a depth of 25 mm; Similar actions We do with three remaining bars
	Install In the prepared holes brass nut-inserts
	Houch legs on bolts protruding from cross
	I turn over and put on legs ready to use table
	After operation: Unscrewed legs; Remove cross; Take out bolts and screw them into the legs so as not to lose; Tabletop Complete

Master Class number 2: Table with converting legs

The next folding table with your own hands is collected from disconnecting for two parts of the table top and the resulting legs of the legs, similar to the one that is installed on hiking chairs.

prossuch a design:

• High resistance and strength;
• Lack of removable details.

Minuses:

• More complicated instruction manufacturing;
• Some loss of compactness. A reassigning tourist table, after all, a little wins in this regard.

Necessary materials

Tools for the most part are used the same as in the above version, so I will not repeat. But with the materials it is different, here you will need:

Photo	Name
	Leaf plywood: Width - 600 mm; Length - 700 mm; Thickness - 6 mm
	Round Barlok. With a cross section of 24 mm and a length of 32 mm
	Bar. with a cross section of 20 by 40 mm
	Selfless

Instead of a sheet of plywood, you can use the ready-made tabletop from the old table. In this case, the project will be released even cheaper.

Stroke work

Consider how to make a folding table:

Picture	Description
	Making countertop: Write up Corners of plywood; Split them using sandpaper; We hold in the middleleaf smooth line; We saw Faneru Popolamaccording to the markup
	Bar sawing on four blanks of 460 mm; Splitthe resulting segments from one edge
	Drilling in two bars in the unborn edges of the deepening; Insert in them a piece of round timber
	Collect the inner legs: Cut two piecesfrom the same bar for a length of 720 mm; Splitthey are both edges ; We produce acknowledgedat a distance of 160 mm from the lower edges and one more on the opposite side above 50 mm ; Insert in the top of the bar; Finish His self-drawing
	We collect external legs: They should be wider in two