Sometimes situations arise when guests come to the house and the owners have nowhere to seat everyone. In this situation, it is better to think about how to make a sliding table with your own hands in order to use it every day and in the event of a large feast.

It is worth noting that the manufacture of such a model is within the power of even beginners in carpentry. You can easily outdo designer tables adding a little personality to the furniture. This option can be used both for the kitchen and for the dining room, it is great for large and small rooms. Practical folding table can be one of the most useful things in your home.

Dining tables have fairly simple designs. Folding models are equipped with a special mechanism and additional countertops. In general, everything is quite simple, the main thing is to correctly draw up the drawings on the very initial stage work.

1 2 3
4 5

The main requirements for carpentry work are the quality of the material and the strength of its fastening. We all know what loads the table must withstand and must comply with this standard. Besides, this furniture very often undergoes transportation, and this is another signal that you need to take care of the strength of the structure.

Dimensions are set from the one who will use the sliding table. There are practically no restrictions here, except that the countertops must hold firmly at the base.

The retractable parts are attached only at the very edge, so making them very long will not win you. With any, stronger load than their own weight, they will sag, and as a result they will completely break. It is worthwhile to reasonably approach this issue and consider some schemes that will tell you the optimal length for your kitchen table.

What material to choose?

All carpenters have a question, what material to choose for extendable table with your own hands? A lot depends on what you plan to make, as well as on your finances.

1 2 3 4

Remember that the countertop, more often than other places, will be exposed to moisture, food debris and other substances that damage it. Therefore, you should choose the material that resists all liquids as much as possible and not only. The following types of wood are considered the best in this case:

• Pine;
• nut.

Before you start creating the shape of the countertop, the wood must be thoroughly dried. It is advisable to use a special moisture-repellent solution and cover the surface in several layers. Also, for additional protection, be sure to use varnish.

To assemble the legs, you can use the same material as for the tabletop. A do-it-yourself sliding table will last longer if it consists of the same material. The bars must be at least four centimeters, since only such a thickness will make it possible to withstand a heavy array of wood and subsequent loads on the product.

Tools for the job

It should be understood that the assembly of such furniture can take you enough a large number of time. For a broader understanding of the process, watch the video on how to do it step by step with detailed explanations. You can learn something important for yourself from there and add something new to your table model.

In order for all the work to go right, you should prepare all the essential tool. Today it is not too a big problem, almost everyone has a similar set in the house:

• screwdriver;
• drill;
• jigsaw;
• Sander;
• building level and roulette;
• construction adhesive.

In addition, you should buy sliding mechanisms in advance kitchen tables, which later you just need to install.

Assembly order

Start collecting parts from the bottom of the table, that is, from the legs. Be sure to make marks at the joints in advance, accurately measuring all distances. Before direct assembly, it is advisable to varnish all the parts, so the tree will retain its original appearance longer.

The upper part of the table and the mechanisms are fixed on the legs. It turns out some contouring of the product, on which, as a result, the countertops will be attached.

Remember that a properly drawn up scheme will help to assemble the mechanism the first time, as experienced carpenters do.

Tabletops are attached to the building corners to the already finished contouring. You need to do this on small screws so as not to damage it. appearance. Be sure to tighten everything thoroughly. For additional fastening of fixed parts of the table, use building glue.

Today, many people are trying to try themselves in carpentry. And rightly so, because a thing created by oneself is much more pleasing than buying in a store. Especially if you creative person, then using fantasy, you can easily complement your room with bright details.

IN Everyday life a small table fully meets the needs of a family of 3-4 people. Such a table is successfully used both as a kitchen and as a dining table. The situation changes dramatically when guests arrive. Many people have a desire to make a sliding table with their own hands.

Any table is not a very simple design, which must withstand significant loads and frequent movements around the apartment. Despite certain difficulties, anyone who is familiar with carpentry can make a sliding table with their own hands. There are many designs of sliding and folding tables. You just need to realistically evaluate which of them you can do yourself.

Step-by-step instruction: design basics

Any table consists of a tabletop, legs and fasteners. Sliding (folding) structures additionally contain removable or movable tabletop inserts and a sliding mechanism. The shape of the tabletop can be round (when extended - oval) or square (rectangular).

The main requirements for the design are the strength of the table top and the reliability of fixing the legs, which should allow it to withstand loads (including shock) and be stable when used while cooking or at dinner. In addition, the surface should be comfortable and practical.

The dimensions of the table are determined mainly by the dimensions of the room and the number of guests who can sit down at the same time. The height of the dining table is usually 73 cm. Dimensions in the extended state can be calculated based on the condition that optimal distance per person at the table - 60-70 cm.

Back to index

Choice of base materials

If you decide to make a table with your own hands, you should decide on the material for the main elements. The aesthetic impression of the design of the table is mainly provided by the tabletop. In addition, moisture, fat and other active substances used during cooking can get on it; may be affected by increased temperature from hot dishes; significant mechanical loads can be applied. Wooden countertops quite reliable, environmentally friendly, practical and aesthetic, but at the same time expensive and difficult to manufacture.

Pine, oak and walnut wood has found the greatest use as countertops. When using wood, it should be well dried and treated with moisture-proof compounds. If natural wood is used for the surface, then it must be periodically polished, as well as varnished or waxed.

Simple, cheap, but enough reliable tabletop obtained from laminated chipboard with a thickness of at least 20 mm. The ends of the plates are rounded and covered with a protective material, such as silicone or PVC film. Such plates can be additionally covered with plastic. A big disadvantage of this material is swelling when moisture gets into the thickness of the material. In other respects, this material is quite capable of competing with wood.

Table legs can be made independently, or you can buy ready-made ones. The most common option is the legs of a wooden bar. Minimum dimensions bars are 40x40 mm. For large tables, use a beam bigger size. So, for a table with a length (in the extended state) of about 2 m, a bar with a section of 85x85 mm is recommended. The legs can be square, round or carved, depending on the desire and ability of the manufacturer.

In addition to wooden legs, metal ones are used. For example, you can purchase ready-made metal legs in the form of a pipe with a diameter of 70-90 mm. You can independently make steel or aluminum legs from pipes and various profiles.

Back to index

Extendable table design

One of the simplest extension table designs is based on increasing the size by extending the surface and stacking additional elements. The main tabletop consists of two parts that are not fastened to the legs and have the ability to move longitudinally in opposite directions from each other.

The sliding structure consists of the following main parts: base; the main tabletop, consisting of two identical parts; full roll-out guides; additional panels. The base is made in the form of a frame that connects the legs to each other with the help of jumpers (collets), and the top panel, which resembles a tabletop in appearance, but is fixed on the legs.

Each of the parts of the main tabletop consists of the surface itself and three sidewalls fixed on it. The extension mechanism is recommended to be made from standard full rollout guides for drawers. It is necessary to purchase two sets of rails with a length of at least 30 cm. Additional elements of the tabletop are made similar to the main surface and have a length equal to the width of the tabletop, and their width is determined by the extension length. The number of elements can be from 1 to 3 at the discretion of the manufacturer.

The principle of operation of the design is very simple: both parts of the main tabletop are mixed in the guides fixed on the table base until they stop. In this case, the tabletop slides on the surface of the base. In the resulting space between the two parts are installed additional elements, which together with the main parts create the appearance of a solid countertop.

Back to index

Making the base

The main function of the table base is to securely connect the table legs to each other and provide support for installing the tabletop. The binding of wooden legs into a single frame is carried out using wooden jumpers - collets. Collets are made of plywood or board 10-12 cm wide and 18-20 mm thick. The length of the collets is determined by the selected table size when not extended.

To fix the collets in the upper part of the legs, grooves are made on two adjacent sides with a size corresponding to the cross section of the collet, up to 20 mm deep. The ends of the collets are fixed in the grooves. The junction is glued and reinforced with screws. To strengthen the connection of the legs in heavy tables, it is recommended to additionally install wooden scarves at the joints.

A sheet of plywood 10-12 mm thick is fixed on top of the frame. The size of the sheet is determined by the dimensions of the frame. The sheet is fixed with screws. In its final form, the base is a table with a rough top. The top plywood sheet is not a mandatory element, since the structure will work without it.

Back to index

Making the main countertop

First, cutting and cutting out two parts of the table top of the selected sizes. If necessary, the surface is lined and the ends are sealed. On the inner end (which is combined with the end of the second part) of each of the parts of the tabletop, two holes are drilled for the dowels of removable elements to enter them. Hole diameter 8-10 mm.

A U-shaped box is made from sidewalls, which is a strip of chipboard or a board 100-120 mm wide and 18-20 mm thick. The length of the sidewalls corresponds to the dimensions of the table base, measured by the legs. The corners of the box are reinforced with an aluminum corner on the inside.

On the inside narrow (reverse) parts of the guides are fixed on the side parts of the body so that the box can move at a height of about 2 mm above the plywood sheet of the table base (or the surface of the collets in the absence of a sheet).

A tabletop is installed on top of the box so that the cut of the tabletop coincides with the free ends of the box. With the help of aluminum corners, the tabletop and the box are interconnected.

The whole set of tourism lovers are divided into two societies that do not understand each other. Some recognize only comfortable rest with knowledge environment in the conditions of many star hotels where all inclusive. For such, there are sites like this http://www.ally.com.ua/tours/hot/. Others prefer visiting all interesting places relying on their own efforts and often their own equipment to increase the comfort of travel. You can find many examples of when when comfort requirements are minimal. A good example is the painting by V. Perov "Hunters at rest".

Quite sufficient is the location on the grass, and the food on a small tablecloth. But it's hard to deny that a small camping folding tourist table did not stop this company. Since, in addition to good weather and a clean place, it is desirable to have it to increase the comfort of your stay. Therefore, it is really easy to build a neat small folding folding table that suits you, especially if you know how to hold a hammer, drill or screwdriver in your hands.

Of course, to get an excellent result, you need to consider necessary system folding table, materials used. At the same time, it can be realized in the form of a suitcase, which ensures the packaging of its legs, or vice versa, to ensure the folding of the tabletop in the form of a roll.

I will give similar examples of the implementation of such designs of folding tourist tables.

Ready collapsible tourist table

Demonstration of the possibility of folding the tabletop after removing the legs on two crossbars, fixed with screws.

Tourist table disassembled.

Folding tourist table light, compact and easy to assemble.

A good example of a table is shown in the video.

• How to make a coffee table with your own hands (0)
  I want to offer to do it yourself simple, but beautiful project country style coffee table. You don't need expensive […]
• How to make homemade furniture (0)
  The network is constantly increasing the number of homemade furniture samples that attract attention, which increases the number of people who want to […]
• How to make an original dining table with your own hands (0)
  You may need a new dining table if: you are tired of the old one; equip the site, creating places […]
• DIY furniture. Joiner's connections. Part 4 (0)
  In this part, we will consider the following types of joinery used in the manufacture of furniture: joining with a mustache, splicing with a mustache, […]

Folding tables are often found in everyday life. They have found application inside buildings and on land. Ordinary factory products perform only a direct set of functions. Modern materials and assembly techniques include decorative aspects. Mass-produced brands produce beautiful convertible models with book builds, complex motors and high quality finishes. It can be difficult to achieve the same parameters on your own. But individual attempts usually end up with the creation of exclusive furniture, unlike anything from mass production. Options for assembling and decorating a folding table with your own hands include classic as well as original design solutions in a modern manner. Calculations, accumulated experience and step-by-step instructions will help to achieve an exact match.

Features of folding tables

Tables with a folding-unfolding function save space and add options to the use of the room. The above qualities are enough to make the application justified from all points of view. An additional nice feature is that self assembly is not something complicated, and the finished product is transformed in just two or three movements. A high-quality factory mechanism will cost a large sum, and folding options with manual control practically do not differ in price from ordinary furniture. One of the options for how to proceed is to make a folding table with your own hands. Money can be set aside for something else, more complex in terms of self-fulfillment. Folding structures are characterized by the presence of a high-strength frame with the expectation of multiple unfolding. Models with glass tops are made of durable materials.

The benefits of making your own

Some advantages independent work obvious. Products are unique in their kind. Moreover, the design can be thought out to the smallest detail in order to get the perfect product in all aspects at once. lovers handmade will be able to realize their potential, learn something new, or make another piece of furniture while maintaining some common features between them. Not the last place in the list of pluses is the ability to control the manufacturing process, namely the quality and other features of the model. The master will always have access to statements about the features of the place or room for which the table is intended. As a result, both appearance and useful features will be better than the options offered by the market. As for the monetary gain, then homemade tables have an advantage here.

Among the shortcomings, the following nuances are noted:

1. Making will take much longer than buying.
2. There is a good chance that the product will break.
3. You will have to first learn some of the nuances of carpentry.

Material selection

There is no more convenient option than a tree. Among the minuses are the high cost and the problem of compatibility with some types of interior. Laminated chipboard often becomes a material for self-manufacturing. Finished goods take on compact dimensions. Chipboard boards withstand high humidity and it was this quality that turned them into a successful solution for kitchen facilities. Table legs are often made of metal, while solid structures in most cases look better than options with metal inclusions. The reason is the low strength of wooden legs. In addition, the installation of wheels on profile pipe takes less effort. In clamshell models, plywood sheets are often used. Presentable appearance of the structures will be given polypropylene pipes. These can be assembled by several methods, including gluing or welding.

Required Tools

You will need a lot of fasteners. Including self-tapping screws 20×4 and 16×3 mm, M4 screws, furniture locks, telescopic rails of approximately 500 mm and aluminum corners 50×50 mm. The legs may require 4 thick metal tubes - 710 mm in diameter. For installation work use hot melt adhesive, applied to PVC edges, plastic or wooden boards. During work, protect hands - with household gloves. Among the accessories you will also need a marker, a long ruler, a thick pencil, a tape measure and a building level. The reliability of the connection to the glue will be ensured by a thermal gun and a building hair dryer. Chipboard sheets are cut with clamps. For cutting, you may also need a file with small teeth, a jigsaw, a circular saw and cutter. A screwdriver is used to work with hardware. The holes are made with a drill, using 4.2 mm drills.

Folding table making workshops

The most popular options are:

• bed table;
• table-bench;
• transformer;
• table-rack;
• book design;
• under the suitcase;
• rotary option.

A common feature of all step-by-step master classes is the definition of the main groups of parts. In most cases, you will need a box, legs and a tabletop, and they are assembled from sheets, boards, beams, wooden or metal fasteners. The basics of interior design are demanding on the use of hardware. It is advisable to apply decorative options with small flat hats, make special recesses for them and adhere to the hidden method of fastening. It is possible to assemble a high-quality folding table quickly and the first time after drawing up a detailed drawing, making trial blanks. Using a heat gun and building hair dryer will have a positive effect on the aesthetics of the joints. Folding tables can rise up, fold in height or in parts towards the center, adjustable with springs, intended for massage or playing ping-pong.

Deciding on design and construction

The oval shape is considered the most ergonomic: due to its smoothness, compactness and at the same time good spaciousness. This is a kind of transitional option between rectangular and round designs. The semi-circular table looks beautiful against the wall. It is used as an element original design or cozy environment with classic motifs. A small square version is ideal for the role of a transforming table with rising sections. Small folding tables come in handy in small country houses and dachas, cramped apartments. They are easy to transport. If none of the designs are to your liking, then you should opt for simple furniture with enough space for family members and 2-3 guests. Folding tables still do not make bulky and most often perform in the hi-tech style or constructivism.

Transformer

Manufacturing begins with the choice of mechanism. Smooth opening and closing is provided by gas lift and springs. They are usually used separately. The second option is preferable for those who assemble any folding structure for the first time. Hidden springs will not spoil the appearance. Useful for calculating materials computer programs. After choosing raw materials, for example, chipboard, as well as drawing, you will need cutting. It is better to order it to professionals, but it is better to do a detailed drawing personally or with them. If you wish, you can also cut it yourself. At the same time, do not deviate from the recommended thickness of the countertop. After processing the raw materials, the elements are added together - to make sure the dimensions and calculations are correct. The frame of the transforming table is assembled using special drills and confirmations. Springs are first inserted into the base, and then the mechanism. If the material is heavy, through connections will be needed.

Marking should be applied with a sticker so that the lines are large and clear.

This is the name of wall-mounted folding tables and structures with attachment to the windowsill. At the same time, the tabletop is cut out with a thickness of 20-30 mm. Going beyond these limits will lead to a weakening or significant weighting of the structure. The length is selected in a harmonious relationship with the height and width (depth). The first and last parameters are calculated based on functionality, because the bulky design will interfere with the normal operation of the premises. The legs are formed strong and stable, sufficient to hold the mass of the dishes and the entire structure. The reliability of the connections is increased by mutual ties for fastening the legs. Tables with placement above the battery are equipped with holes so that the windows of the room do not fog up. And in this case, it is undesirable to use chipboard, it is better to stay on plywood or MDF. Triangular support pieces are used for medium and short tables.

In cramped rooms, space optimization comes first. A table that turns into a bed has disadvantages - it should be remembered that it will not work to lie down during the day. For a day's rest, you will need a spare place. The final design will look like a table, but there is additional space for bedside tables, cabinets and shelving. The sofa table is made with a bed, a box and a lifting mechanism. The product is assembled with a built-in or separate box, depending on the design. The structure is usually fixed to the wall. best material for furniture will be chipboard. The boxes are assembled from bars with a section of 5 × 5 cm, external supports are taken 14-15 cm high. decorative elements they form inches from a board with a one and a half centimeter layer of wood. The reliability of the design will give a slope between the ends of the legs. Retractable bases are made using bar or piano hinges.

The function of the turn-and-fold configuration is to increase the size of the tabletop. The task is facilitated by the fact that the use of fasteners for rotation (for example, like a TV) is not necessary if the furniture will be laid out periodically. Of the materials, you will need a laminated chipboard 2.5 cm thick. The optimal dimensions of the tabletop are 77 × 50 cm. For a false tabletop, you will need a fragment of 67 × 40 cm. Then legs and strappings, confirmations and corners are prepared. Fastening is organized using card loops and 4-6 dowels. The false tabletop is installed from above, after which the corners are fixed with furniture corners, and ideally with confirmations. In the central part of the turn, a closed hole is made for a steel dowel, or the mechanism is simply mounted. After that, the lower part of the tabletop is attached to the system, and if a dowel is used, then its remaining half is closed with a hole made in the tabletop.

To assemble the product, you need to understand only elementary things:

• drawings;
• making templates;
• fastener features.

The design has gained popularity due to its compact size when folded, fast movement and easy transformation. Book tables weigh relatively little and will be useful in any of the living rooms. The assembly of the entire product will take no more than 2-3 hours, since the structure of the structure is simple and includes legs and a tabletop of 3 elements. The base is assembled from two moving and one static planes, that is, according to the tabletop itself. The design has a small variety of forms. It remains for a person to choose between legs and wheels for the sidewalls, and the configuration of the latter - between frame and solid. The edges of the countertop are best cut rounded. However, the central part of the countertop is sometimes made large, with space for chairs or shelves for bottles. Some variants of "books" function without a central element. But at the same time, all varieties will cope with the role of a dining table.

First of all, a box is assembled, in which the mechanism is then hidden. The length of the base is adjusted to the corresponding indicator of the transforming element, but the width is selected based on other criteria. These most often turn out to be the width of the countertop and the need for legroom. The manufacturer of the transforming mechanism should be asked about the level of maximum permissible load. Frame slats are usually attached with confirmations or self-tapping screws. Lifting mechanisms heavier than 4-5 kg ​​are best mounted through the method, with the placement of holes under the legs. The next steps include doing through holes under the bolts. With a Forstner drill, recesses are made for the caps. The walls of the base will eventually turn out to be self-supporting. The legs are fastened with ties to achieve a safety margin of 50 kg. The tabletop is attached to the mechanism from the inside.

Shelving table for office or nursery

Children's rooms and offices are sometimes too small to accommodate a table. But if you attach a countertop to a floor or wall rack, then it will be possible to solve two problems at once. In this case, saving space is obvious, and the countertop will bring additional benefits - in a fixed position, it closes the shelves. The solution is equally successful for nurseries and offices, because it allows you to organize creative process e.g. sculpting, drawing, designing. If necessary, the table-rack is turned into a hiding place in order to easily hide things from strangers. Among the materials, it is better to use a 12 mm thick fibreboard and a 15 mm thick multiplex. Fasteners are selected with flat heads and preferably without sharp corners. Flat dowels will do, and an eccentric sander will be needed for the job. Separate parts are fixed with clamps.

Camping picnic table

To assemble a portable table you will need:

• self-tapping screws;
• wing nuts;
• furniture bolts;
• latches;
• suitcase or door handle;
• loops;
• timber for the box of the tabletop and legs;
• chipboard or plywood sheet.

First of all, two halves of the countertop are obtained from chipboard sheets. Next, a long beam is cut: into segments according to the calculated length. The bars are connected to the halves of the table from all sides. Both parts of the tabletop are then attached to each other with hinges. For the legs you will need 4 more bars. Holes are drilled in the obtained supports, as well as in the frame, with an indent for the free connection of the frame and supports. The latter are assembled together with furniture bolts and wing nuts. Next comes the turn of the pen. Two latches are made on the suitcase so that it does not open when moving. Exist additional recommendations about build quality. Even before completing the main part of the work, you need to draw a diagram from several angles, calculate the size and number of elements. The design is easy to assemble, but has a complex structure. It should be studied first.

massage

Assembly begins with the manufacture of countertops. Fragments of 600 × 900 mm are marked on two sheets of plywood. For cutting, a jigsaw is usually used. The ends are sanded with sandpaper wrapped around the bar or processed grinder. On one of the previously noted segments, an 18 × 12 cm hole is made for the face. Next cut out the frame. From a bar with a section of 50 × 20 mm, 8 segments are obtained: 4 by 560 mm and the same length of 900 mm. The blanks are fastened with 45 mm self-tapping screws. Two frames are made with dimensions of 900 × 600 mm outer perimeter. The first recesses for fasteners are drilled before installing the latter - only 3 mm each. Then legs are made from the same bars with a cut of 50 × 20 mm. The supports are then assembled on piano hinges. The same type of parts fasten the two halves of the countertop, not far from the ends.

tennis

Folding table tennis table - useful thing for active people and just an unusual interior decoration. The bases are usually formed from a bar. Frames are assembled using self-tapping screws, according to the size of the covers. Like the halves of the table, there should be two frames. For folding options, two crossbars are mounted near the central part to increase stability. The legs are made of metal. Moreover, it is desirable to install them on wheels. The joint is decorated with card loops for quick and easy folding in the upward direction. The rigidity of the structure will give articulated struts. Sometimes they do without brackets, for example, by using a pattern of a construction goat for legs. To prevent the lid from moving during the game, holes the size of a bottle cap are drilled in the frame. Then the fastening is organized with wooden or metal pins.

Creating a round table

First of all, they are determined with the size of the countertop - perhaps round version the desired diameter is on sale. The folding tabletop configuration will consist of two or more sectors, but there is also an additional variety - on folding legs. The supports themselves are usually obtained from a bar. The upper part of the table can be lowered or raised due to them. In the course of work, a diagonal measurement is made when the countertop is positioned at the specified height. The legs of the sides end where the supports of the other begin. Paired supports are connected by a bar or board. As a result, cruciform pairs are formed. Fastening is organized at the level of half the height.

The legs are fastened to the table top with screws and glue. If the surface of the table consists of 2 parts, then they are connected to the supports by 2/3 of the length of the latter. For this, 4 more pieces of timber are also used.

The round version is the most spacious and comfortable in terms of freedom of movement.

It would seem that the catastrophic lack of space for free movement is a common “disease” only for apartments and private houses of the old Soviet layout, when the number of square meters living space per person or the total area of ​​a private house was limited. However, how then to explain the popularity of multifunctional or folding furniture all over the world? The answer is simple: a person tends to be rational about the world around him, including the space of his home. Folding, resizable tables and chairs are a prime example of this.

A few reasons to make a folding table with your own hands

There are many on the market today various designs folding tables, but there is nothing complicated in their independent production. In addition, in some cases, making a folding table with your own hands is much more profitable and, again, more rational:

• The size of the table can be varied based on the size of a particular room;
• the design of the table can be chosen depending on the ease of use, at will;
• the design of the table is chosen in accordance with the interior of the room, so it does not “stand out” from the general style of the room.

An important factor is the exclusivity of hand-made furniture.

Folding table in the kitchen - the most best option in conditions small apartments when all family members can sit behind it (when folded). In the unfolded version, this is a full-fledged banquet table, at which twice (or even three times) more people can fit.

To make a folding dinner table, it’s not at all necessary to go to cabinetmaking courses: you can just use our advice, dream up a little (in terms of design, of course), and think a little more - already on the drawings of the folding table that you need.

Materials, fixtures, fittings and tools

For work, in addition to the material (it is better to use chipboard for the table top and table box elements), you will need:

• Tools - a jigsaw (or a hand-held electric end saw), an electric drill, a screwdriver or a curly screwdriver, a key for confirmations.
• Fasteners and accessories - their number, types and sizes depend on the intended design of the table, so we will talk about them separately in each case.

Case 1. Making a folding table - transformer " coffee table»

If you decide to make a folding table - a transformer for the living room, then you will need to purchase special transformation mechanisms (Fig. 1 or 2). Such a table will perfectly disguise itself as a regular coffee table, until guests descend on you and you need to set the table for several people in the living room.

Tables-transformers can have different dimensions.

Fig.1 Single transformation mechanism

Fig.2 Double transformation mechanism

Making such a table is quite simple, subject to strict adherence to the instructions and procedures.

First of all, carefully consider the proposed drawing of a folding table (Fig. 3), specify its dimensions in relation to your requests and, if necessary, make changes to your drawing.

Fig.3 Drawing of a folding table

We will need:

1. LDS plate (25mm):

• For countertops - panels 750x90 mm (2 pcs.);
• in case of choosing a double mechanism (fig. 2) - one more panel with a size of 350x720mm for an auxiliary tabletop;
• in the case of choosing a mechanism from Fig. 1 - a connecting panel, the length of which is equal to the distance between the platforms of the mechanisms, the width is equal to the length of the platform of the mechanism.

For the frame:

• 2 panels 730x460mm (end sides of the table),
• 2 panels 730x150mm (side parts of the box for the mechanism, which serve as a strapping for the tabletop);
• 2 panels measuring 680x730mm (the bottom of the box for the mechanism) and 730x730mm (shelf for magazines "g").

Fig.4 Furniture corners

Important! All details must be cut very precisely, before final assembly it is best to “bait” the main nodes of the table and, if necessary, adjust to fit.

Assembly of a folding table-transformer

Process the end parts of all cut parts with sandpaper (skins), paste over with a melamine edge to match the chipboard color.

Fig.5 Assembling the base of the transformer table

If you were careful and accurate when marking out the parts and sawing them, then assembling the table will not take much time and effort.

As shown in fig. 3 and 5, first, with the help of confirmations, we connect the bottom and sides of the box for the mechanism (they are marked with crosses on the part b of Figure No. 5).

With the help of the same confirmations, at the desired height from the floor, we fasten the shelf for magazines with the end parts of the table - 2-3 fasteners per side.

We attach the box to the end legs with the help of furniture corners, for greater reliability we screw another 1-2 confirmations into the middle of the line of contact between the bottom of the box and the end plate of the table.

• With the help of card loops we assemble the countertop;
• In the drawer of the table we attach the mechanism for transformation.

We attach the tabletop to the platforms of the mechanism:

If the mechanism is single, then we attach the lower part of the tabletop to one pair, and fasten the second pair to each other with a connecting panel (on the underside of the platforms).

If the mechanism is double, then we attach the tabletop to the large arms of the mechanism, and the supporting tabletop to the smaller ones.

The table is ready. It remains only to mask the confirmers' heads with plugs and wait for the guests!

Case 2. Making a turntable folding table

If you are more interested in the idea of ​​​​a swivel folding table, then you will need special fasteners for rotation (you can use the swivel mechanism for TV), but if the table is not laid out daily, you can do without it.

Fig.6 Rotary folding table

To make a folding dining table with a swivel top, we need laminated chipboard (25 mm thick) in the following dimensions:

• 770x500 mm - 2 pcs. (for a folding tabletop);
• 400x670 mm - for a false tabletop (1 pc.);
• 645x100 mm and 375x100 mm - 2 pcs. (for tying table legs);
• 4 bars 40x40mm or 60x60mm, 700-750 mm long each (for legs).

In addition, you will need 8 furniture corners for attaching the legs, 8 confirmations for the strapping box, ombre loops for the tabletop, rotary mechanism for TV, 4-6 wooden dowels.

Fig. 7 Scheme of turning the tabletop

It should be said that one of the most popular transformers is a book table, the drawings of which you can also find on our website.