It's time to update the heating system or are you planning her organization from scratch? Do not forget to buy the best steel batterieswe will help you in this.
Buying equipment in our online store you have the opportunity to order a range of services, which includes: selection, transportation, installation and connection.

Our specialists save your time and are ready to take on all the troubles associated with buying, transporting and installing heating batteries, you only need to take work and pay for services.

Five reasons for the replacement of old heating devices:

1. Low energy efficiency.
2. Non-estate appearance devices.
3. High power consumption.
4. The appearance of corrosion.
5. Clogging devices.

Sooner or later everyone faces the need to replace heating radiators, experts recommend to replace in advance, without waiting for unpleasant surprises, such as end-to-end corrosion.

Each manufacturer of heating equipment insists that the installation of instruments and systems conducted professionals, it will create effective system Heat supply operating at 100%.

Professional installation of radiators Buderus Logatrend

Modern heat sources, such as panel radiators Budyrus Logatrend, just a find for Russia with its harsh climatic and specific operational conditions.

• Steel aggregates have high heat transfer.
• Have a technically perfect design.
• Panel radiators Designed using the latest technologies.
• Constructions allow for disinfection and cleaning at any time.
• Devices are made of safe materials.

Modernization of the heating system and its turnkey organization:

1. A qualified wizard is ready to perform an individual technical calculation, on the basis of which the selection of radiators is carried out.
2. The next step is the choice of models suitable in dimensions, the principle of connection and power, as well as the selection of components.
3. To the day specified by the buyer, our courier service is delivered. At the request of the customer, the transportation and installation date can be completed one day.
4. The installation of panel radiators in small objects is performed by one or two masters, depending on the scope of work. Large objects are engaged in a brigade of highly qualified installers under the guidance of the experienced brigadier.
5. Installation and connection of heating systems are performed according to modern requirements and specifics. engineering systems. We provide a guarantee one year to all work performed.
6. After all mounting work The master holds consultation and answers all the questions that have arisen.

How is the installation of panel radiators?

Today, there are several basic connection schemes, two of them are used for batteries with side connections and one is used for batteries with the lower principle of connection.
Therefore, converating with the installer of heating equipment, be sure to inform how the heating system is arranged or you plan to perform it.

1. Side diagonal connection - allows you to provide maximum heat transfer, which is why it is most preferable for many. Using this option It implies the connection of the feed pipe to the top nozzle of the radiator, and the discharge pipe to the bottom nozzle from the opposite side of the device. In this case, the heating devices give the maximum of their power. The technique is great for long heating batteries and promotes uniform warming up.
2. One-sided (side) connection is most often used in high-rise buildings. This technology It implies the connection of the feed and returns is performed on the one hand, the feed pipe is connected to the top nozzle, the return is connected to the lower connecting hole from the same side. The effectiveness of this method is high, but just lower than when using the previous method.
3. The lower connection of the radiators today is very popular. Use this method during the pipeline in the floors. The heat transfer of devices when using this method is also slightly lower than during the application of the diagonal scheme.

The choice of battery connection scheme depends on many factors, determine the most suitable option From the point of view of technical and engineering features of the room can only professional. The master will make not only the technical calculation, but also the project of the future heating system.

Buderus Logatrend panel radiators are used in single-tube and two-pipe systems.

• Logatrend K-Profil is available to the side connection, the devices have 4 nozzles (2 on top on both sides, two from both sides, the inner thread diameter of 1/2 inches holes). Models do not have mounting brackets, so during installation does not matter the side. Installing the heating devices can be installed on the wall or on the floor, for the first option you will need a classic mounting kit, and for the second, a special bracket is needed.
• Logatrend VK-Profil is issued with lower connection and two pipes and external thread 3/4 inches. The radiators of this series go without mounting brackets, so during installation you can turn them with any side, the connection node depending on the selected side, will be either with the right or on the left side. The pipe for the entrance tube is closer to the center, for the discharge pipe closer to exterior corner. Mount the instruments can be installed on the floor, and you can install on the floor using special brackets.

The devices have the ability to adjust the heating intensity, for this, electronic and mechanical devices are used - thermal heads. Professional masters will select equipment, pipes and components, perform installation of heating systems and will hold all necessary workrelated to the installation of heating equipment.

Installation of radiators with their own hands: Basic mistakes of homeowners

Almost 90% of household complaints on poor heating has the same reason - not proper installation batteries. Mounting and connecting the heating technology The process is simple, requiring the sequence and compliance with the manufacturer's recommendations.

Most Popular Errors:

1. Installing the device below the level. A similar error leads to a significant decrease in heat transfer.
2. Installation of devices is higher than it should lead to a reduction in the flow of warm air.
3. Use of racks for outdoor installation manufactured by other manufacturers not suitable in size. It is recommended to use the components of the same manufacturer as the radiators themselves.
4. Not horizontal installation devices.

If you plan to perform the radiator mounting yourself, carefully read the manufacturer's recommendations for installing and connecting devices.
Experts recommend not to risk in this case and if you have at least a drop of doubt, use the services of a professional installer, which will perform all work from and before and provide a guarantee.

We decided to visually show how to properly install the heating radiator indoors. To hang the radiator, you need to have a wall at the place of fixing the radiator "derived in zero". For finish finish (Coloring or pastries behind the Wallpaper radiator) The radiator can be removed, it is important that the radiator fastenings remain in their place and are not transferred. Installation is made under a small inclination, let them avoid aircraft accumulation.

Visual example Installation of heating radiator

For example, we chose the steel panel radiator of Buderus Germany. This model has a lower connection and a built-in thermostatic valve. At the radiator "Buderus" there is a very high-quality packaging of durable plastic, protective corners are put on the corners of the radiator ( of blue color).

Connect pipes

Now you can connect to the radiator of the pipe from the collector. But we propose at the beginning to put a certain unit, the so-called "multiflex", which has shut-off inserts, fittings for adjusting and draining the coolant, can change places direct with a return (depending on the model).

Also, multiflex can be direct (floor pipes) and angular (pipes are suitable from the wall). IN this material The direct multiflex is shown, but in the work more often set the angular versions.

Installation of fasteners

Fastening is screwed. Moreover, in the standard situations, the mount is fixed with the help of one self-press, which is complete with the fastening.

It is worth noting that for "Buderus" radiators, there are several models of fasteners, which are ordered separately depending on the selected radiator model and on the type of surface to which it is assumed to be installed.

Some models of radiators "Buderus" have a feature: they are double-sided. That is, you can hang them with multiflex to the right, and it is possible to left. Only it is worth removing the top cover and cross the "tongues" on the opposite direction.

Logatrend VK-Profil Type 22 (Lower connection)

Steel panel radiators with lower connections Buderus Logatrend VK-Profil are used in the heating systems of residential, public and industrial buildings.

Connecting the device to the system is carried out through two lower connecting holes G3 / 4.

According to GOST 31311-2005, crimping pressure - 13 bar, operating pressure - 8.7 bar.

Panel heating radiators Logatrend

High quality performance: When producing Buderus radiators, roller contact high-frequency welding is used. Pressure pressure - 13 bar, operating pressure - 8.7 bar.

Energy efficiency: saving up to 5% of energy due to the special built-in Danfoss thermostatic valve (exclusively designed for Bosch thermotechnik).

Hygienic performance and trauma-safe edges: radiators can be mounted in medical and children's institutions. Buderus Logatrend Profil Types 10, 20 and 30 radiators can be used in rooms with increased cleanliness requirements, as there are no convection plates that makes it easy to disinfect the surface of the radiator.

A wide range allows you to choose the required thermal power radiators corresponding to the temperature of the coolant, including quite low (50-60 ° C).

Range

• length from 400 to 2000 mm
• height from 300 to 900 mm
• radiators of types 10, 20, 30 can be mounted in rooms with increased requirements for cleanliness, as there are no convection plates, which makes it easy to disinfect the inner surfaces of the radiator

Equipment

• adapters for mounting brackets - 2 pcs. (for radiators longer than 1.6 m - 3 pcs.)
• brass plug 1/2 "- 1 pc.
• air-insulated valve 1/2 "- 1 pc.
• thermostatic valve Danfoss - 1 pc. (comes in a fully open state)

Coloring and packaging

• 4 stages of anti-corrosion treatment - deep degreasing, phosphating, primer, hot powder spraying)
• the packaging of radiators is made of reused pure polyethylene

To provide comfortable conditions Buderus. offers steel panel radiators Logatrend with Lower Logatrend vk-Profi Or side Logatrend V-Profi Connection.

Panel heating radiators Buderus Logatrend

• High quality performance: When producing Buderus radiators, roller contact high-frequency welding is used. Crimping with rated pressure 10 bar;
• Energy efficiency: saving up to 25% of energy thanks to the special built-in Danfoss thermostatic valve (exclusively designed for Bosch thermotechnik). Only in radiators VK-Profi. With lower connections.
• Hygienic performance and trauma-safe edges: radiators can be mounted in medical and children's institutions. Buderus Logatrend radiators Types 10, 20 and 30 can be used in rooms with increased cleanliness requirements, as there are no convection plates and removable lattices, which makes it easy to disinfect the surface of the radiator.
• A wide range allows you to choose the required thermal power of radiators corresponding to the temperature of the coolant, including quite low (50-60 ° C)

Simple and quick installation of heating radiators Logatrend Profil

• Buderus heating radiators can be installed by any side, as there are no strips that determine the rear side of the radiator
• Playing brackets allow you to move the radiator fixed on the wall to 3-5 centimeters, which facilitates centering of the radiator on the wall

The uniform heat transfer of the front side of the Buderus steel radiator is depicted on the thermofotographies on the left. And the right is shown the usual flat heating device with a glued front panel.

Home Feature of Buderus Logatrend radiators - This is the welding technology of radiators panels. Whereas most about the products use point welding, Buderus applies roller welding, that is, the panels are welded with each other with solid lines, and not depicted points. Such a technology is somewhat more expensive, but it allows you to increase the reliability of the radiator.

Because The radiator can be hung by any side of the wall, then when planning, you can shoot the side on which the thermostatic head and pipe supply to the radiator will be.

Buderus provides a complete warranty on radiators for 5 years (both on the production cycle and operation), subject to the requirements of SNiP 3.05.01-85. The service life of radiators is 25 years.

Heating radiators with lower connections

Steel profiled panel radiators with built-in right valve, with a sealed plug and aircraft cork.
- Built-in valve with external stepless adjustment KV allows you to carry out hydraulic alignment without tools.
- Outdoor thread G 3/4 according to DIN V 3838, lower eyeliner, so pipes are visually invisible.

Radiators are supplied with a built-in valve on which there is a plastic cover protecting it during construction work. The valve is possible without a sensor. In the future, the temperature tuning and regulation is made by the corresponding thermostatic head.

Side Connection Radiators

Steel profiled panel radiators with side elements, removable upper grille and four connections with internal thread G 1/2
- fastenings for the radiator are converted separately

* - The power of radiators is calculated according to the European standards DIN EN 422. Temperature pressure 50 ° С. (75 - Feed temperature, 65 - Frame temperature, 20 - room temperature)

Steel panel radiators - the best choice For a private house

Heating radiators are extremely an important element Any heating system, since it is precisely the heating of the surrounding space. Therefore, to choose from these heating devices, it is necessary to approach responsibly and in advance to familiarize yourself with their features and species.

In this article, we consider the device and technical specifications One of the most common designs - panel radiators.

Features of panel radiators

General

Main construction feature The heating devices of this class is the absence of traditional sections, instead front side Made as a solid panel. The latter is going out of two steel sheetswhich adopt the necessary form as a result of pressing. In particular, there are ducts for the coolant.

When welding two stacked plates, a thin panel is formed, the thickness of which hardly exceeds one centimeter. The radiator may consist of both one and from several such panels. This design gives many advantages, but at the same time, and some drawbacks that we will consider below

Compared with traditional or bimetallic radiators Heating, steel panels meager. Thanks to this B. heating system The rapid circulation of the coolant is carried out, and, as a result, almost instantaneous heating.

Already after 10 - 15 minutes, the panel heating heats the room. However, this feature has the opposite direction - the radiators are cooled, if the system is turned off, as quickly as heated.

Moreover, an important feature Such a design is air convection, however, this applies only to radiators consisting of several panels. This feature Implemented due to the presence of air channels located between the drives for the coolant.

As a result, the device produces heating not only by radiation of thermal energy from the case, but also due to circulation thermal air in room. Thanks to this, the design of the design can reach 75 percent.

However, despite the fact that the panels for heating radiators are made of high-strength high-quality steel, they are designed to work at low pressure in the system (no more than ten atmospheres) and heat carrier temperature up to 110 degrees Celsius. For these reasons, they are usually used in private and multi-storey country houses.

As B. centralized systems Heating The pressure is above ten atmospheres, the panel batteries are installed only in the case of the arrangement of autonomous heating systems.

Note! Use panel radiators in the centralized heating system can not only because of its high pressure, but also a contaminated coolant. Narrow ducts are quickly clogged and the device fails. Therefore, to work in such conditions it is better to use bimetallic radiators.

Dignity

The advantages of the batteries of the type under consideration are quite a lot, below we give the main of them:

• Neat, simple enough, but at the same time stylish design. And modern equipmentIt is used in the manufacture of these devices, allows you to produce products in different style versions, ranging from the classics and ending with minimalism.
• The ability to adjust the degree of heating the device, due to the fact that the products are usually completed with all sorts of electronic or mechanical devices.
• Increased heat transfer - as mentioned above, the use of the principle of convection can significantly increase the level of efficiency.

• The price is significantly lower than on other types of batteries. This is due to the fact that the steel itself is significantly lower than copper and aluminum.
• Economicity - since devices have a small container, significantly less energy is spent on heating the coolant.
• Multifunctionality - the device performs a function as an ordinary radiator and a convector.
• Minor weight, thanks to which it is not difficult to perform battery mounting on its own.
• The ability to choose the device most suitable sizes and the necessary power.

Tip! You can also give the panels and conventional sectional batteries, for example, pig-iron by installing special panels. Moreover, it can not only make them more attractive, but also more efficient. Panels for heating radiators can be made of the most different materials, For example, from wood or metal.

disadvantages

With all the advantages of these heating devices, it is impossible to call them ideal radiators for the following reasons:

• The exposure to hydrowards is one of the main reasons why panel batteries cannot be used in centralized heating systems.
• The sensitivity to the water acidity level is to avoid corrosion of the steel surface, the level of pH of the coolant must be stable and kept in the range of 8.3-9.5.
• Instructions for the operation of panel batteries prohibits draining water from the system for a long time. IN otherwise The internal steel wall structures will be in contact with oxygen, which will lead to corrosion.

For these reasons, not in all cases it is advisable to acquire panel radiators.

In the photo - Battery with side connections

Types of panel radiators

All existing steel panel radiators are divided into several groups.

In particular, according to the method of connecting, they can be conditionally divided into two types:

• Lower connection devices - both battery pipes are located at the bottom.. Such a connection is convenient in cases when passing in the floor. True, it should be borne in mind that in this case the heat loss coefficient is large enough.
• With lateral connection - in this case, the supply pipe is located on top, and the discharge - bottom. This allows you to ensure uniform heating of the heating device. True, if the design has many sections, then in this case there will be significant heat loss.

As mentioned above, the radiators under consideration may differ in the number of panels. On this basis, they are classified into the following types:

Tip! Knowing the types of radiators, will not be difficult to competently choose the heating devices, in accordance with the heated area.

Also, devices differ in sizes that may be as follows:

• Width - 40 - 300 cm;
• Height - 30 - 90 cm.

Therefore, before purchasing the device, it is necessary that depend on the area of \u200b\u200bthe room and the system power.

Manufacturers of panel steel batteries

As you know, the quality of the batteries depends not only on the type of design, but also the manufacturer. Therefore, you should not give preference to the cheapest products from little-known manufacturers. Minor benefit can lead to the fact that in a short time you will have to change radiators with your own hands.

• Budrus (Germany);
• Thermoplus (Italy);
• Leader (Russia);
• Kermi (Germany), etc.

In addition, the products should be purchased in large building stores to avoid fake and be confident in the execution of warranty duties by the seller.

Output

Panel steel radiators have a number of advantages over analogs, however, it should be borne in mind that their use is limited to some technical characteristics. If the conditions in your heating system meet the requirements of these devices, then they will become an excellent choice.

From the video in this article you can emphasize some additional information on this topic.