Cement and fabric vases with their own hands for the garden - the original find, which is able to decorate any naudal landscape. Despite the fact that they appeared in the household courtyards only a few years ago, the history of the existence of such elements of the decor began for quite a long time.

Using street vases made from concrete, in landscape design goes back to the ancient garden and park arts whose works were located in the palaces. In the front alley and parks, the mandatory attribute were exquisite bowls made in the baroque style. Later, such vases began to occupy an honorable place in landscaping of urban parks and gardens, public buildingsParade. Concrete street flowers are widely used to decorate entry in housing, sites intended for recreation, open terraces. In the gardens they perform the roles of small architectural forms - Their use in the landscape allows you to slightly dilute the monotonous unity of the green herbal carpet and create an attractive visual accents.

Show all

Production of concrete products

To independently make concrete florals, you will not need special time-consuming actions.It will be necessary to preserve ingredients for the manufacture of the working solution and choose the container where the concrete will suffer. Pick up forms with which the product will be performed.

Decorative vases for giving with their own hands make it not so difficult if you have a fantasy and the desire to create. Wonderful garden decorations are performed in any forms - they can be made of round or square, rectangular, abstract.

There are many materials that are suitable for casting. These are plastic bottles with different capacity, and children's rubber balls, and thase from metal or plastic. Amazing beauty can turn out potatoes from fabric and cement - you can create a real masterpiece with your own hands.

The first flower beds of fabric and cement probably turned out by chance. After all, many people after repair are simply thrown into a dump Impregnated with a cloth with cement mortar. But if you slightly put on the cloth and fix it with the help of a solution, it will turn out unusual and very beautiful.

How to make a compartment for flowers

The simplest variant of the concrete floral can be obtained as follows:

1. 1 Choose the necessary materials. In addition to the concrete solution, you will need old towels (terry or wafer) or a piece of any dense tissue of the desired size. To begin with, you can take an unnecessary bucket. Also need a piece of polyethylene. When carrying out work with cement mortar, protect your hands with gloves.
2. 2 Cement Take water to a consistency resembling liquid sour cream. A bucket on which you will dry the vase, turn up the bottom and wrap with polyethylene, otherwise it will be not easy to remove it after hardening the mixture. Towel immerse in a container with a cooked solution. Then get it and straighten it. It should be impregnated with a mixture, without a residue, do not leave dry spots on it.
3. 3 On the tilted up the bottom of the bucket, throw the towel, then the bottom is better thank it so that there are no folds, otherwise the future vase will turn out to be unstable. Reflect the falling folds of the fabric as you like it more. Leave the resulting design for a couple of days. After hardening the fabric, remove the outward bucket. Here is your floweque and ready.



You can make a vase for the garden with your own hands exactly what you have thought it. The resulting product can be painted bright colors Or just leave as it turned out.

How to decorate your vase?

If you liked the idea of \u200b\u200bmaking ornamental flowers and you want to build such garde pumps, you can safely begin work. Needleworks always attract a lot of attention, they can be proud to show friends and acquaintances. But sometimes you want something more unusual or bright. Homemade florals you can decorate as you want.



For example, you may not like the rough outer surface of the homemade vase. You can, after a small alteration, turn it into a glossy. To do this, in the manufacture of the mixture, select the cement and sand of small fractions or add to the mixture dry rotband plaster. For breeding the mixture, use silicate glue instead of water.

Polyethylene is used to form a glossy surface. The main method of manufacturing will be needed by the following additions:

1. 1 Prepare a big tight piece of cardboard. There is a greenhouse concerning material on it and straighten up so that all the folds turn out to be smoothed.
2. 2 After impregnating the tissue with a solution, it must be spread on the cardboard and disclose well so that the towel is better to the surface.
3. 3 Then the center is installed in the center, which is selected to create a bucket form, after which the entire design should be neat and very quickly turned over, while holding the cardboard. The fabric at the same time should flip the bucket along with the film.
4. 4 Form the folds of the future product to your liking. You can not do deep races - it will be difficult for you to get the film. From the already frozen design, you can try to smear the lighter stuck pieces of the film.

The desired gloss was obtained, but small defects remained on the product. How can this be fixed? Take a brush and wake the dry vase silicate gluewithout diluting it. So you can hide all admitted defects. In addition, you can additionally be mixed in the adhesive - so you get the pot of the desired color and add it the outer surface of the shine.

Printed option

In the process of manufacturing a vase, you can make a decoupage. To make an outer decorative layer, you will need a thin printed fabric or loose paper with a pattern. For example, wallpaper, old newspapers fit well. No need to use glossy magazines, posters, vinyl wallpapers.



In making a sequence of actions, the same is observed as when performing a glossy surface. You just need to add a layer with a pattern. The phased procedure is as follows:

1. 1 Cardboard with a film is flawed with silicate glue. Fabric, newspapers, wallpapers selected for drawing are applied to it. Everything is smoothed.
2. 2 Goatalide paper material Lashes silicate glue. The glue must be good to impregnate the material - it will take about 10 minutes for this. If dry plots remained, scrape them additionally.
3. Three fabric impregnated with cement over the picture. Everyone needs to be disclosed well, then the cardboard with the received "sandwich" is knocked over to the shape and leave to harden. Plates to straighten.

If, after drying the form, you left the protrusions unnecessary to you, they should be trimmed with a hacksaw. Formed roughness, it is possible to sand with a large emery mesh - it is easy to find in business stores.

How to make a solution?

So that the vases are beautiful, the manufacture of the working solution is desirable to pay more attention.



This will provide him the desired density And the speed of frost.

To obtain a concrete solution for work, the following substances are needed:

• gravel shallow fraction;
• sand;
• cement;
• water.

Portland cement fits well, white cement. Gravel to choose a fraction of 3-7 mm, sand will suit Career fine-grained. Everything is mixed in the tank in the ratio of 2 part of the sand, 1 - cement and gravel. Water is added in small portions before receiving the consistency of the liquid sour cream.

In order for the finished product of it is lightweight, a small ceramzite is added to the knead. When using such ingredients, part of the gravel is better replaced by it.

Forms after the fill must be covered with a film or wetted fabric - the hardening is thus coming much slower. So you can prevent the formation of cracks when the concrete is drying. The design must be disassembled no earlier than 3-4 days later. The surface of the resulting product is removing using the brush and skins, roughness cut.



You can independently prepare a material that is imitation of tuff or sandstone. For this prepare a solution of 1 part of cement, 1 - sand, 2 - peat. Dilute a mixture with water until the consistency of potato mashed potatoes. With the help of modeling mass attach the necessary shape. You can use art concrete for cooking - it allows you to make durable, elegant and lighter products.

How to paint the porridge beautifully?

It is most convenient to make concrete caspo with staining. Acrylic paints are suitable for this: they are most resistant to atmospheric influences. It is possible in the manufacture concrete mix Add coloring pigment to it.

The product in front of the color is dried and applied primer. So that the painted Vase looked beautifully, the colors are better to choose not very bright, close to natural - the main point for focusing the view should be plants inside the porridge, whose task to create a natural framing is. You can arrange on the surface decorative painting In several colors, a vegetable composition, a geometric pattern, abstract drawings.



How to prepare soil and plants for ornamental flowers

A layer of gravel, ceramzit, crushes - for drainage are poured on the bottom of the concrete. A layer of nutrient soil is embanked from above, which should include trace elements and mineral additives. In the soil for annual colors there should be many organic matter. To provide organic fertilizers It makes peat, compost or overwhelmed manure.

Those dacifics who are seriously going to grow flowers in street vases, you should know that before the onset of winter time it is necessary to cook flower shoes for the next season. In winter, in frosts, the soil is completely freezing in vases. Therefore, in order to create flower arrangements in homemade caspo, it is better to choose annual plants.

It is easy to paint the seedlings of annuals with your own hands. In flowerals to achieve the desired effect, plants are plants with bright color and leaves with decorative appearance. It may be velvets, dahlia annual, Begonias, Koleus, Lion Zev. Good visual impression produced ampel plants - This is Nasturtia, Petunia, Nastures. In concrete vases, you can thicken a landing in order to quickly reach the desired effect. It should be understood that with such a small volume of the Earth, it will quickly dispel, sheer wheels are required regular.

In flower jackets you can place replaceable compositions. In the spring, it is better to be better made up of a gloring bulbous plants - it can be daffodils, hyacinths, crocuses, tulips. Cineraria, lavater, Viola are suitable for summer compositions. In autumn beautiful blossom Provided by astrams, heliotrops, petunias.

The territory around the house is a business card of any plot. Its clearance is always paid to special attention. Excellent option Decor are street vases with a variety of plants. With their help, you can create whole compositions from colors, or expand accents throughout the site.



Pros and cons

Vases as a landscaped decor that assumes manufacture own hands, have positive and negative sides.

Benefits include:

• Transportability. Thanks to their easy movement through the territory, you can create new compositions, and during the weather or in winter to carry plants on the attic or a veranda.
• The ability to decorate the courtyard, where the land is closed with concrete or tiles, and plant landing in the soil is impossible.
• Fencing function. Using street containers, you can divide the area to the zones, make a cozy corner.
• The ability to create favorable conditions in each vase for separate plant: Special soil, fertilizer, watering.







• Low cost. Compared to a multitude of other elements of the garden decor, containers allow you to save money. Products made with your own hands allow you to do it doubly.
• Saving space. In containers, not only flower beds can be located, but also cultural plants, use them instead of beds for growing cucumbers, tomatoes, greenery, berries. This is especially true for small sites in order to save space.







Vases for the street practically do not have drawbacks, however, depending on the material, several of them can be distinguished:

• DISTRIBUTY. Refers to plastic and wood products.
• Plastic vases are harmful to health, as hazardous substances can be separated in air.
• Ceramic products are very fragile.
• Plants that are in containers from ceramics and metal require frequent irrigation due to over-fast drying of the Earth.
• Large weight. This disadvantage has products from concrete and stone.



Forms and sizes

Street vases can be a wide variety of shapes, sizes and colors. Making them with your own hands, you can be sure that it will be a product that meets all the required criteria. And its appearance may be due to the material used and manufactured technology.

Choosing a size for the future vase, the space should be taken into account on the site.





On the small territory Large, massive containers will look ridiculous and cumbersome. Also, voluminous compositions from plants should also be avoided. At the same time, on a spacious square, small, modest containers will be lost and will not perform their decor function.

The form of the container may be any. It is limited only technical capabilities and fantasy. If the site is planned to be issued in a certain style, then it is he who will dictate the appearance of the street decor.







We choose the material

The choice of material is due to such factors as the cost finished product, features of its manufacture, availability required tools For the manufacture and skill of the wizard. Decorative vases for the cottage or garden can be made with their own hands from wood, concrete, stone, plastic, ceramics, metal, or from infirred materials.



Wood

Refers to short-lived materials, as the product on the street is constantly exposed to moisture. Such a product should be processed special toolpreventing rotting. In this case, it can be used for several years. The most common variant of the container for flowers from the tree is the manufacture of it on the basis of stump. In the trunk grows the inner part, the holes for drainage are made, the plant is placed inside. It is better if the earth will be poured first into another container, and then put inside the stump.







Concrete or plaster

Simple I. cheap Materials in work. Concrete and gypsum products are durable, practical, resistant to environmental impacts. With their help, you can make practically any shape of the flower box. However, it will have a lot of weight, so it is better to make it right away at the place where it is planned to be further located on the plot. As a variety when mixing concrete to cement, you can add peat. In this case, it turns out the product from the hypertheph, which externally does not differ from the present tuff or sandstone.







A rock

Stone vases are heavy and expensive. They look very presentable, differ long service life. The process of making a container of a stone is quite complicated, so such a product is better acquired in the finished form.







Plastic

Plastic products are distinguished by a short service life and simple appearance. However, they are inexpensive and presented wide selection Flowers, shapes and sizes. Plastic containers are usually purchased in the finished form.







Ceramics or clay

Such floweries are fragile, easily break. Ceramic or clay product can be made with your own hands, if you correctly comply with the technology, including firing.







Metal

Metal vases are durable and will serve for a long time. Women look very original, although they have a fairly high price. The process of manufacturing metal flower-consuming and requires special equipment.







Screw materials

The choice of breeding agents for the manufacture of a vase is limited only by the fantasy. Flower container can be made from a huge amount of usually unnecessary in the farm: tires, bottles, old barrels, carts, baskets, buckets, tires, foam, rubber boots and bicycles. Such products will be different in originality and uniqueness.













Master classes

From the girlfriend, you can make a beautiful flower vase.









From wood

The easiest way is the vase of the cutting tree or stump. It is best for this birch. From tools for work, drill and chisel will be required.

1. On the surface of the stump you need to drill a few holes. What they are more than they are closer to each other, the easier it will be further work.
2. Slide the inside of the stump to the desired depth.
3. Put in the deepening container with land.
4. The entire surface of the tree is treated with a special means against rotting.





In addition to stump, for the manufacture of wooden flower beds can be used ordinary boards or timber. In this case, the hacksaw and hammer will be required.

If the source material is the boards, one of them needs to be made separately four shields and combine them with each other. It turns out the rectangular container to be processed protective aneg And decorate at your request.

If a timber is assumed as a material, the rone is assembled on the principle of a log house like a designer.

The bars are cut into the desired size, and on each side it was done half of their thickness.







Then the whole design is assembled and fastened with nails and self-tapping screws.The finished product is grouped and covered with a protective agent.

From concrete

Based on cement, you can make flowers of a wide variety of forms and sizes. For this:

• It is necessary to prepare a form, most often it is plastic, arranging in all respects.
• Prepare a mixture for filling out the shape. It includes cement, agroperlite and peat in proportions 2: 1: 2. All components fall asleep into a suitable container and bred with water to thick consistency. The mixture turns out a lot, stirring such a quantity is very difficult, so it costs it in several approaches, separating the solution into parts. To make a floral container with color, when mixing the solution, dyes are added to it.





• The bottom of the form is aligned with cellophane. The main thing is that its surface is smooth, without folds. Any irregularity is imprinted on the finished vase.
• To the cellophan you need to lay out the prepared mixture. To begin with, fill the bottom, making it about 5 cm in thickness. To control the depth, you can use toothpick or straw. Pre-at the bottom of the future vase is stacked the plug wrapped in polyethylene to provide a drainage hole.
• Then lay out the entire remaining surface form.









• When the form is completely filled, it must be left for 10 days to frozen. If the mixture will be reduced, it must be moistened with water.
• The finished container is to pass a metal brush over the entire surface to remove all irregularities, but too smooth places to give a small relief.
• After that, the vase need to rinse with water, dry, wrap the film and leave for about a week.
• When the product brightens, you can remove the film and put it on right place. The weight of such a flower player is very large, so the process of its manufacture is best practiced immediately on the place where its further finding is planned.





To increase the strength of the design in the concrete layer, you can insert a metal frame.

In addition, for the same purpose, it is possible to add chopped fiberglass to the mixture.



From automotive tires

Automotive tires not used by purpose - a material that often lies without a case or is thrown as trash. Of these, it is easy to make a bright and original decor for the garden or giving. Choose better winter tires without spikes, it is softer and thinner.

To make a flower container in the form of a flower, you need:

1. Draw the desired contour on the sidewall of the tires.
2. Cut the contour item. To do this, you can use a rubber knife or a logged saw.
3. Next, you need to turn the tire on the wrong one. For this throughout the tire, cuts are made every 5-10 cm.
4. Vazon ready. He remains to decorate at his request, fall asleep the earth and plant a plant.









From plastic tanks

Very easy way to make flower pot - Take the basis of a plastic bottle, barrel or any other capacity. It is enough to cut a hole in it to plant a plant, make several drainage cuts and fall asleep the earth.

However, in the case of a plastic pot, it is worth taking care of its stability.If the container is small, its bottom can be simply filled with small stone or pebbles. If we are talking about a large container, it is better to make it stationary.

To do this, it is necessary to wear a metal pin in the selected place.

The bottle is cut down the bottom. Then the bottle is "put on" on the metal pin with a neck and deepen into the ground. Ready Vase can be decorated at will and fall asleep with soil.









From the pipe

Original idea is the use of plastic and metal pipes For the manufacture of flowerhouses.

Pipes can be installed vertically. In this case, only the upper part of them for planting plants is used. If you need to install several pipes, different in height and diameter, it turns out an interesting composition.

You can install pipes horizontally, doing on the surface of the opening for plants.

Such original flower pots look beautiful along the tracks, lawns, around the perimeter of houses and greenhouses.







Finishing options

For large street vases, you can choose the original decor, which will become the final stroke of their design.

The easiest way is to paint product.You can use one shade for all made flowers, and you can create a multi-colored composition of all the colors of the rainbow. The main thing is that the planted plants are harmonized in color with a painted container.

For plots with houses in vintage styles Suitable artificially aged flowers. To do this, they are covered with selected paint, and a layer of cracker is applied on top.

To keep the paint for a long time, the surface must be pre-coated with primer.







Another way to design a street vase is to decorate it with various infirred materials. The decor can be created from cones, branches, fine stones or pebbles, a bit of tiles, mirrors or colored glasses, creating a mosaic effect. This requires only special glue.

If he shed or stained the surface, it needs to be immediately removed, otherwise then after frozen, it will be impossible to do.

After that, the Vazon should be given to dry. If the decor uses a tile, glass or stones, the surface can be additionally refined for full completion of the work. Besides natural stones, It is possible to use artificial, which will be perfectly chosen in size and look more aesthetic than natural.



How to make a cottage plot?

Selecting flowers containers as the decor of their site, it is primarily to assess their safety for people. For example, so often used tires from automotive tires - Not the safest option. They can highlight toxic substances in the air, be dangerous, especially if there are small children in the family.

In addition to security, the vase must meet the requirements for appearance: corresponding to the size and style of the site.



Its size must be harmoniously fit into space. In addition, if the house and the entire area are decorated in a certain stylistry, the vases must be answered.

Not all plants are suitable for planting them into street pots.To issue a plot flower compositions, It is worth considering the features of their root system, watering and the need for sunlight.



Plants such plants will be suitable for planting in flowers:

• Petunia. This is simple in the care of flowers of various colors that bloom all summer.
• Pansies. Their flowering continues for a long time. They are unpretentious, distinguished by a variety of coloring and varieties, grow low, but fluffy.
• Ageratum. Different with long flowering and unpretentiousness in watering.
• Fuchsia. Thanks to its falling mind, it creates the impression of being in a blooming, fragrant garden.
• Verbena. Suitable for disembodies in containers, has a modest root systemmay be combined with other varieties of plants.











Beautiful ideas for inspiration

What the designers and gardeners themselves came up with:

• fabrics, napkins, poured concrete and frozen forever;
• rubber boots of bright colors and different sizes as original vases;
• conventional plates attached by rows to a wooden fever or a metal pin as a Christmas tree or pyramid;
• from tires you can even build alpine hill;





• broken ceramic plane should not throw out, shards can serve original decor;
• old galvanized watering cans, buckets;
• mosaic from old ceramic dishes;
• box of boards with grille for curly plants.





Gardening of the country's territory plays a huge role in its improvement, as even a small clumab with flowers perfectly transforms the "naked" space. On large areas today in landscape design, whole architectural green "creations" are often found.

What to do that, who has 5 acres in the country and those, almost all are busy, but do you want to warm the landscape? In this case, you can equip the clubs of small sizes with bottles with plants. It is about how to make outdoor colors for flowers with their own hands we will tell in this article.

Varieties of Vazonov

• Indoor

Rooms are divided into portable and standard, with simple and complex forms. Production material can be the most diverse: polymer concave, natural and artificial stone, wood.

• Street

Street vases are much larger than room, and they are located only on the street. They can be manufactured from both plastic - more economical material and from polymerbetone - more expensive option.

• Decorative

Such vases are particularly relevant in those places where every centimeter of the plot on the account is literally. Very often, such vases can be found on urban small courtyards.

• For registration of entrance groups

This species is the most common, can be placed on the pillars, couches or just on Earth.



Vasons shape and dimensions

Street vases should be in harmony with the common style of the country area. In some embodiments, geometric shapes of vases will look more concise, and instances are suitable with unusual, extravagant notes. It is worth not to forget that in large areas, small vases look ridiculous, and, on the contrary, in the landscape of a small square they will not fit at all. At the expense of the coloring of street vases, then one basic rule is played here - the pot should not be brighter than the plants in it. Also, it is also not worth paying special attention to various shades, one-timeness is best emphasized by the style of the entire site.

In the vapor landscape fashion, the main colors are brown, gray, terracotta and white.

Wooden vase from stump and cut trees

The stump is not at all unnecessary dead tree, but on the contrary, it can become a precious landscaped potential consisting for flowers. How to convert a stump in beautiful vase? For this you need a chisel and drill.

• Initially, a hole must be drilled on the surface of the stump, and than they will be closer to each other, the easier it will be further to process the tree.
• After that, with the help of the chisel, carefully remove the inner wood. Speak this procedure until the depth of your future vase does not reach the required parameters. The size of the vase is dependent on the fortress and the dimensions of the stump itself, and than the drowing wood, the thicker should be the walls.
• All, on this process of creating a wooden vase is complete, it remains only to fall asleep the land.

A very interesting variation of the vases is obtained from spokey trees, and especially from birch. It is not worth putting the plants directly into the Vazone itself, since the wood is susceptible to moisture, and with frequent watering, the tree just just starts rot. Better inside the carved wooden branch to put any pot. The tree is desirable to handle a special protective agent for the occasion of the water from the pots by the pot during watering colors.



Vases from old things

For the organization of street vases, any old things are suitable, ranging from various jugs, buckets, finishing with old shoes and bottles from beer.

• Any old plate is a potential option for organizing colors vases. To do this, only hold the plate over heating device And when the material is heated, it will become plastic, after which he can give any shape. In this way, you can create real masterpieces, the main thing here is very careful and do not burn.


A broken glass, various small pebbles, seashells, nail polishes fit as decorations. This version of the vases is a blank fantasy flight, here the most difficult is the correct selection and layout of decor elements. The easiest and simple way is a finishing with colored glass that is fastened with tiled glue.

• Abnormal bowls, mugs, jugs will perfectly cope with the task of landscape decoration of the site. If yours old dishes From clay, you can stylize absolutely any part of the site, enhancing a flower composition into a number.

Always can also be fantasized and combine unnecessary dishes with old furniture. For example, a beautifully painted and decorated pot can be put on the chairs or a tube, which will serve as an excellent flow of a flower bed.

• Organize small flower Klumba You can use the table from the old sewing machine And the box of plywood.

To do this, we separate the legs from the car, thoroughly and wipe the dryer. Confirm the box between the legs, after which the entire surface is staining with the pulverizer. Initially, apply the black database, then take the paint of silver or golden color and carelessly tassel, barely touching the table, make horizontal strokes. As a result, it turns out a beautiful vase under the antiquity.

Plastic Color Vases

Vase options from a plastic bottle mass, but this option is on an amateur.

The easiest way is to cut a two-liter bottle, and on the reverse side, make several holes for water drain, a little paint from the can, seashells and your Vazone is ready.

A twental bottle can be a full-fledged outdoor vason, but it requires a more serious approach. So that the pot was as stable as possible, it will have to be done stationary.

• In the place of the intended placement of the vason, insert a piece of reinforcement.
• The bottom of the bottle cut out so that the height of the side of the sides is equal to about 20 cm. This will be the bottom of the future vase, covering the "technical solution" with reinforcement.
• In the bottom you need to drill a hole with a neck size of the bottle.
• Then the entire surface must be painted with waterproof paint.
• After complete drying, the paint can be assembled design: we wear the neck to the inserted fittings, and the "skirt" from the bottom we ride on the neck.
• Now you can start frighting the earth and planting plants.



Street Tire Vase

Cover from the tire is fast, free and at the same time in the original method Creation of vases that emphasize the beauty of plants planted in them. To create it, it will take a bit of fantasy, half an hour of free time, a pencil for a mark and a knife or an electrolovka. The size of the selected tire may be the most diverse, it all depends on the desired vase size.

• Tire markup. The cut is made by a knife along the border between soft and thicker rubber. Inside the auto strokes placed metal cord, which will serve as a natural border, which should be performed by cuts. In the circle of the entire tire, an ornament should be applied for which rubber cutting will be made.
• Necking. They should be performed well sharpened by a knife or an electrolovka, the depth of cuts can vary from 5 to 10 cm. The width of the cutting ornament should be equal to at least 10 cm, since in the future it will act decorative element Vase.
• Turning cuts. After you have made cuts, you should turn them inside out. For this, efforts must be made from the center of the product and at an angle of 25 degrees. Remove the third of the outdoor part, then the work will go easily.
• Decoration. The tire inside out the tire now has the type of real vase, it remains only to transform it, adding small elements and paint into the desired color. Cut parts can be given the shape of triangles, ovals or rectangles.
• Filling the soil. Before falling asleep the earth, the varnish material should be installed on the bottom of the vason, which will prevent the weed germination and provide water drainage.



Concrete Color Vases

To organize a concrete vase you will need:

• two sudins of different dimensions;
• cement;
• water;
• vegetable oil;
• spray.

Depending on the desired amount of vases, take the same dimensions of a large container. With the help of a smaller ass, you will make the concrete walls of your vase.

Stages of creating a concrete table for flowers:

• The first thing to do is to be treated with vegetable oil inner side Big I. outer surface Less capacity.
• After that, take a small plastic tube and make four identical segments of about 5 cm from it, which will be applied to drainage.
• It is also necessary to take care of cement mortar, if you plan to make a color vase, then it's time to add a dye to the mixture. The ratio of cement mortar: two parts of cement, three pieces of sand and water.



• After all preparatory work You can proceed to the immediate organization of the street concrete flower vase. To do this, initially fill in a large capacity with cement mortar, a layer of which should be approximately 2 centimeters.
• After that, insert 4 tubes and wait until the solution grabs.
• Then lower the small container, which should cover the tubes. The gap between the large and smaller capacity gently fill the remaining solution.
• About a day when cement mortar It will freeze, slowly remove the inner support, and the cement sprinkle with water. In large capacity, our future vase should be kept for about a week, while wrapped the entire design with a film and regularly wasting with water.
• After the expiration of seven days, the pot can be carefully knocked out of the form. Our Vazone is ready, it remains only to fall asleep his land and plant plants.

Flower Vase Caps

The conventional vase of the kapzo is distinguished by the lack of drainage, an unusually decorated surface and is mainly performed by decorative functions. The capacitance of the kap is placed, as a rule, a pot with a flower, but in some cases it is possible to plant plants right into it, then in this case you need to ensure good drainage.

The size of the kap must be 3-5 centimeters above and 5-8 centimeters wider than a pot with a plant. You can easily make a kapso alone by purchasing a conventional container and decorate it with pebbles, ribbons, beads, drying, artificial colors or other decor elements, but much more original and harmonious will look a kap, made completely with your own hands. Also, construction baguettes are perfect as a scenery, which, with a small wet, are adjusted under any form of a vase. It is enough just to stick a baguette on the prepared bowl and wipe the surface of the clay. Fully processed by this material, the vase will look like a real modeling.

For example, you can take old shoes, Tin jar or unnecessary bucket, paint them and decorate with decorative elements.

It looks very beautifully a kap from bamboo sticks, they must be carefully smudded together and from the inside to attach a burlap, you can attach a small bow on top.



From the point of view of color comfort, the most optimal fabric is the usual clay, gypsum or asbestos.

• We take the usual veduce of the required sizes and wind it with a gauze bandage, in advance, in advance in plaster or asbestos, which have a consistency of sour cream. The thickness of the wall of the kap must be at least two centimeters.
• After the Vazon is completely dry (somewhere after 12 hours), the kapso should be carefully cleaned with sandpaper to a smooth surface.
• Then you can proceed to decorating, for example, to show fantasy and put some drawing using acrylic paintAfter which it is necessary to cover the plane with acrylic varnish.

Flowers for street vases

Most often, the plants of two or three types are planting a small pyro.

It looks very beautifully, the dimorphothek, Gazani, Ursinia dwarfs, which are distinguished by unusual and bright inflorescences. All these flowers are grown as annual, an exception is the Dorfoothek, which is transplanted for the winter to a room with good lighting.

In large vases, compositions are composed of flowers of various in height, form and color.

If the Vazon is overlooked from all sides, then in the center high plants, and around surrounds with flowers twice less than size. Very spectacular in large vases look asters, dahlias, pelargoniums, veciatts, pansies, Verbena, Iberis and Lion Zev.

In the vases placed on the hills, planted flowers - lobelia, begonia, petunia, bell, tunberg and fuccia. For street vases, you can choose a huge number of colors, but if you wish it is the classic option, then stop your choice on Petunia, Balzamine, Leljelia, Dichondra, Budre, etc.

The garden will be wonderfully transformed if you decorate it with the items made with your own hands. The greatest satisfaction of the garden designer gets if it is possible to combine beauty and benefit. From this point of view, the most winning decor - street caspo and vases that will not only decorate outdoor territory, but also the favorite flowers.

Tirepipes

Gloomy tires rarely fit into the garden design. But really to decorate them beyond recognition. For example, imitate brickwork.

Decorative cheek-well built from tires, timber and metal tile

Unique buses from tires are made quickly.

Step-by-step instruction:

1. On the side surface of the tire with chalk, apply the cut line.
2. Candle the tire with a knife along the lined line.
3. Turn over the tire, press the foot inner, take over the edge and pull up and on yourself.

When cutting with a knife, the blade is worth wing with solidol or machine oil for better sliding

Cover the rubber to the primer and apply the drawing.

Oil or acrylic paints are used for street vase

For a complete disguise, impose a grid on the tire, then a thick cement solution with sand and stick the tile.

Tiled or pebbles Cover from a tire looks very stylish

Photo Gallery: Registration of Tire Vases

Draw on a tire landscape and put the hosts bright vase in the form of a parrot will decorate an unsightly place. Very elegantly, vases in the form of a cup of tires in the form of a kettle in the form of a kettle in the dining area green Tones organically fits into any landscape Vase from a tire in the form of a cup suitable for ampel plants

Making Tire Vase - Video

Plastic and Glass Tara Vases

The usual garbage will serve as beauty, for example, various containers. Instantly transform plastic if it is punctured by twine.

For the stickers of the twine on the street Vazone will suit any waterproof glue

Excellent option - Decor of burlap.

Rough burlap shares fragility of colors

Trimming branches will also reliably hide plastic.

The branches to the vancture are glued with glue or tied with twine

Apply a thermoclaster pattern on the cachep and cover acrylic paint.

To create a volumetric pattern, you will need a thermopystole

Or place the bottles in gift bags.

Kashpo from gift bags - fast way Plastic bottles

Cutting a part of the canister, create a porridge for the wall.

The surface of the canister is lubricated with glue and sprinkled with sand, to create the effect of the "sandy" face

Secure glass bottles on the fence and put in them so much and cocked.

To cut a glass bottle, wrap it with a copper wire in a cutting place, heat the ends with a lighter and lower in cold water

If you cut a plastic bottle in half and glue the neck to the bottom, it turns out the original vase.

If you paint the vase with silver or gold paint, the feeling that metal pumms will arise

Plastic Bottle Vase - Video

Kashpo in the form of funny characters from plastic containers

Attract children so that they participate in the creation of unusual pots.

Garden vases are created from any plastic capacities

Kashpo piglets do it yourself - video

Bottle flowerba

It looks great for a mini glass flower garden. The basis (bucket or tire) is deceived by a thick cement mortar with sand. Then stacked the ranks of bottles, pressing the neck into the solution based on.

Think in advance the location of the vase because moving it hard

Kashpo from Gypsum

Eco-friendly materials are included. Plaster plastic properties are famous for the best plastic properties. Laps of fabric moistened in the gypsum solution are wound on any container or wire frame, until the desired wall thickness is achieved. When the product dry, it is grinding, ground, paint or stick on the walls decor.

In the manufacture of kashpo gypsum can be replaced with a putty or alabaster

The decor uses pebbles, shells, tiles.

If you mix the plaster with the color of the right color, we get colored seams

Kashpo-Swan

Romantic notch will give the garden of the birds of birds. For caspo in the form of a swan you will need:

• gypsum - 5 kg;
• plastic bottle 5 l;
• twine;
• wire;
• mesh for wings and tail;
• bandage;
• primer;
• paints (white, black and red);
• putty knife;
• brush;
• emery.

Mix the gypsum is convenient to a special spatula

Step-by-step instruction:

1. Cut the side of the bottle and pour into the resulting container sand.
2. Insert one end of the wire in the neck, give it a bend and wrap the twine along the entire length.
3. Apply a spatula gypsum Solution 2 cm layer on the surface of the Skeleton of the Future Bird.
4. On the sides of the body, press the reinforcing grid (wings) at an angle.
5. Take several layers of bandage and gypsum on the grid to hide it.
6. Form your head and beak, winding the wire bandage and overlapping layers of gypsum. Orthodox smoothes with a brush.
7. Fake a tail from the grid and treat as wings.

Dry the figure for three days, then passionate the sandpaper. Cover the brush bird, wait for drying and paint.

Cashpi-swan is not as hard as it seems

Making Cachepo Swan - Video

Cachepo from barrel

Purchase of large volume is useful. For example, iron barrels Stylace under human figures.

Ampel plants are planted from barrels, which are beautifully falling out

Or weathered with wooden slats.

Skumps are attached to a pistol for climbing nails

Wooden barrels are cut in half along.

From one barrel you can make two vases

The cut barrel is installed on a stand so that it lasts longer

Homemade Kashpo Barrel - Video

Kashpo from unnecessary things

It is not necessary to throw out everything that was worn out.

The second life can be given even to frank bread

Sometimes Kashpo from the older becomes a raisyn of the garden.

Exquisite porridge is obtained from bird cells

The old umbrella will be transformed if you put flowers into it.

For the umbrella longer retained decorativeness, just put pots in it with plants

Photo gallery: Kashpo from old things

Cut the old basketball ball in half a holey watering can not be suitable for watering, but the garden decorations are paint the old coat and plant the ampel flowers old flip flops and cups - a wonderful ensemble attach trimming sewer pipe To the wall and put in them Petunia, unnecessary hose Wrap around a vase
Cook the cache-umbrella from trimming of reinforcement and iron sheet

Wooden caspo

The most organically in the garden looks products from natural materials. Among them is leading a tree.

A simple rone is performed from a conventional stump with a drill and a chisel.

Step-by-step instruction:

1. On the cut stump, drill holes around the perimeter.
2. The chisel remove excess wood.
3. Treat the inside of the stump by the mourn and dry.
4. Bed inside a polyethylene vase and plant plants.

You can simply put a suitable pot

Cover the decorations made of wood by antiseptic so that they do not rot.

So that the logs do not ride, lean the stops in the ground

Kashpo from Bruus and Board

Everything that remains after the construction of the house is used to decorate the site. Bruus and boards build stylish containers for plants.

Kashpo from a tree is better to do on the legs, so it will last longer

Kashpo, painted in light grayare suitable for the Garden in the style of Provence.

In wooden caspo drill drainage holes

If wood trimming in the barn in the barn, collect caspo in the form of a well, cars, bike.

Kashpo-well adorns the garden

Photo Gallery: Cachet of wood

If you put stumps on each other, it will be a picturesque composition
Space in Kashbo drought-resistant plants in the porridge from the stump winning the bulbs: tulips, daffodils, crocuses
Consider anything not treated wood quickly lose sight
To see the texture of wood, toned with her oil. Little wood porridges from wood. Suspend in a gazebo Wooden Cacheboard will decorate the site near the house.

The main requirement for the wire for Gabion is durability

Any plastic container is easily decorated with rubble. The screws are screwed into the cascaps, between which the wire is wound, cement mortar is put on top and crushed stone is pressed.

The grid of the caprony thread or wire is needed so that the cement does not fall off from the tank

The dried products are covered with varnish.

At the top of the iron cans, holes are done through which the twine is passed

Vazon will not fall out of the attachment woven in the macrame technique.

If the design allows, attach three chains to the top of the porridge

Sometimes kashpo nailed to wooden railwhich is attached to the wall of a dowel-nail.

In the shelves, the shelves drill holes in which the rope is passed

Hang kashpo - video

After cutting firewood at the cottage there is a lot of beautiful bark, which I use to decorate vases. The bark is cut by strips of 2-3 cm wide and is attached to the pot with the help of a thermopystole. Working surfaces before gluing are diverse and degreased. If there are gaps that mask them with moss or lichen between the pieces of the cortex.

Thermocles softened into the sun, so vases, decorated with the bore, better keep in the shade

Creation of caspo from girlfriend, take care of their durability. Wooden vases Treat tools from rotting and drill drainage holes. Before decorating tanks with stones or tiles, wrap them with a reinforcing mesh so that the solution with the decor did not fall off.

Not limited to plant planting. Thoughtful combinations of form, colors and textures change the arrangement and revive the bored landscape. It is not necessary to order expensive author products to break the garden of fantasies at six weaves: homemade vases, competently inscribed in the landscape, look no worse than the creations of fashionable designers.

What material to choose?

Each dacha is there a small supply of building materials with an interesting texture - why not let them in business? From stone, wood, concrete and plywood it is convenient to produce massive vases for bulk park compositions. Compare the advantages and disadvantages of different materials and make a conscious choice!

Material Properties	Concrete	Wood	Moisture-resistant plywood	A rock	Natural clay	Decorative clay
Strength	high	average	high	average	average; Needs firing	average; Does not require firing
Plastic	high	average	low	low	high	high; Quickly freezes
Susceptor susceptors	average	high; Material requires varnishing	low	high	low	low
Microbial damage and rotting	low	high; needs to be processed by antiseptic	average	low	low	low
Sensitivity to temperature drops	average; gains strength only at the plus temperatures	high	low	average	average; Application is required	average
Wasons manufacture methods	casting	cutting, knocking up boards	cutting	cut	lepak	lepak

Molded concrete vases

Large vases geometric shapes the easiest to cast out of concrete, building an excess from two sudine different sizewho do not feel sorry to throw away. Lubricate the walls of vessels by vegetable oil and put one vessel to another and pour into a large container of a liquid cement with sand and dye. Then take plastic pipe, Cut into four parts, immerse the segments into the solution and leave one day. In the morning, carefully remove a smaller ass and spray the clutch concrete with water. After a week, the vase should be removed from the form and fill the earth.

On the walls, the pot beautifully looks embossed decor: small pebbles, colored glasses, sinks, beads and buttons. And how to cast curly flowers and make patterns with a towel, will show the video.

In landscape design, irony welcomes. Want to raise yourself mood - use gypsum and concrete busts from a red corner as a stand for vases with hanging compositions. Upgraded images of classics and revolutionary leaders in lush green wigs, guests will satisfy the guests!

Prefabricated Vases from Bruus and Stone

If you are friends with hammer and nails, you will not be difficult to lend stylish vintage vases, similar to drawers from the balconies of our grandmothers. Using the segments of the timber as the ribs of stiffness, pinned the boards to them, leaving the gaps between the planks so that the walls of the vason are not swollen after the rain.

The plaques treated with the verse are connected by grooves. In both sides, there are half thicknesses on both sides and connect the boards like the designer and fasten the joints with nails. Bottom Send bottom cut from plywood sheet. For reliability, it can be made of moisture-resistant plywood at the same time and sidewalls.

According to the same scheme, luxury stone vases are collected. Stone plates are cut on the planks and combine glue. Dear varieties of stone, such as marble, jasper or onyx, can be replaced with a cheaper and fuel tumor, travertine, sandstone.