The Italian brand Baxi produces an advanced heating equipment, which is in demand in many countries of the world, including Russia. It is presented not only with compact wall-mounted, but also floor-standing boilers in the form of three model lines: Baxi SLIM, Baxi SLIM EF and SLIM HPS. Floor standing boilers Baxi have a multiple margin of reliability and durability, are used to heat residential, utility, industrial and public premises. They are renowned for their long service life and the absence of operational problems.

• Baxi SLIM - floor-standing volatile gas boilers heating with a cast iron heat exchanger (14.9 - 62.2 kW)
• Baxi SLIM EF - floor-standing energy-independent gas heating boilers with a cast-iron heat exchanger (22 - 60.7 kW)
• Baxi SLIM HPS - floor-standing volatile gas heating boilers with a cast-iron heat exchanger of average power (78.7 - 107.9 kW)

Baxi floor-standing gas boilers, as mentioned above, are equipped with durable cast-iron heat exchangers. They are resistant to corrosion, withstand temperature overload, and have a long service life. Thanks to them, boilers can operate for decades without additional maintenance. Atmospheric burners are responsible for heat generation.

The Baxi SLIM series of boilers is represented by a very wide model range - these are boilers with both open and closed chamber combustion, both single-circuit and double-circuit (with a pre-installed boiler).

A little about the meanings in the name of the SLIM series heating boiler:

• 1 - single-circuit boiler
• 2 - double-circuit boiler
• F - closed combustion chamber, respectively, without F - open
• i - electronic ignition, it is in all boilers
• N - no hydraulic accessories (tank expansion, safety groups)
• 150 .... 300, 400, 490, 620 - maximum power, respectively, 15 .... 30, 40, 49 and 62 kW

Thus:

• Baxi SLIM 2.300 Fi - two-circuit boiler (with a boiler), 30 kW, with a closed combustion chamber and electronic ignition of the burner
• Baxi SLIM 1.490 iN - single-circuit boiler, 49 kW, with open combustion chamber and without hydraulic accessories

Advantages of Baksi floor-standing gas boilers:

• Compact design;
• Fast heating of the coolant;
• Minimum heat losses due to the thermal insulation of the buildings;
• Automatic temperature maintenance;
• Large power range;
• Possibility to work on liquefied gas;
• Stable operation at reduced gas pressure.

Baksi boilers got thousands positive feedback users and specialists in heating equipment.

Floor standing boilers Baxi are presented in three model lines, including single-circuit and double-circuit models. The SLIM line is compact and neat; in some models, circulating pumps with air vents are installed. V dual-circuit models built-in boilers are provided. In the SLIM line, heat exchangers with a large heat exchange area are installed, boilers have thin casings. As for the non-volatile line of SLIM EF boilers, it is distinguished by the ability to work in buildings without electrification. Ignition in them is carried out from the pilot burner. The equipment independently maintains the required temperature in the heating circuit.

Gas floor-standing boilers Baxi are available in different power ratings, from 15 to 107.9 kW. The heated area can exceed 1000 sq. m. The equipment is fully adapted to Russian operating conditions, has a high efficiency and provides fuel economy. If necessary, it can be reconfigured to work with liquefied gas. Some models are equipped with weather-compensated automation and two-stage burners.

Do you need a floor-standing gas boiler from the Italian brand Baxi? You can buy it in Teplodvor online store. All manufactured model lines are on sale. Customers are offered delivery services in Moscow and all over Russia. The equipment is accompanied by an official manufacturer's warranty.

Floor standing gas boiler Baxi Slim

When it is required to heat the house quickly and with minimal costs, it is preferable to choose a floor-standing gas boiler baxi. Moreover, if there is a gas pipeline nearby. The owner of the house will have to collect the necessary papers, install a step-down station, stretch a gas pipeline and buy a gas boiler.

The Baksi manufacturer produces various modifications of boiler equipment from wall-mounted to floor-standing cast-iron boilers.

The most popular models for large cottages today are cast-iron floor-standing boilers baxi slim... They feature high thermal efficiency, low consumption gas fuel and rather modest in size and weight. If we take, for example, a floor-standing gas boiler of average power (no more than 30 kW), then it can weigh no more than 130-140 kg. This fact will mean the following - you no longer have to choose to install gas boiler additional room in the form of a separate extension. It is enough to choose the basement of the house, install the boiler inside, connect gas, water and electricity, and we can assume that in a short time the heating boiler will be able to heat the house. Modern floor boiler baxi slim must have a connection to electricity, from which both the power supply unit of the heating boiler works together with the automation, and circulation pumps, appreciated for being able to accelerate the coolant to the desired speed in the heating system if there is a gas shortage. Most of the floor-standing cast iron boilers BAXI manufactured in single-circuit form. This fact means that one heating circuit can heat the house and at the same time provide hot water using a boiler. indirect heating an impressive capacity (up to 2000 liters), which will allow you to get an excess of hot water needed for household needs. For this, the BAXI boiler manufacturer uses a control panel installed on the front cover of the boiler, which in turn switches the pumps to the boiler, heating or mixing unit... And there is one last advantage - you no longer have to rekindle floor-standing cast iron boiler in manual mode (using a burning piece of newspaper), since it has its own electric ignition system, thanks to which the floor boiler can be switched on and off completely automatically. If we summarize all the positive advantages of cast iron floor standing boilers baxi, it becomes obvious - they are considered the most relevant and practical for those houses that have a supply of electricity, gas and tap water.

Baxi SLIM- floor standing, rather compact gas boilers with electronic flame modulation. The boilers are equipped with a cast iron heat exchanger and an atmospheric burner. The model range is quite wide and includes boilers with a capacity of 15 to 62 kW, which allows you to choose a boiler for heating a room with an area of ​​up to 620 sq. m.

Double-circuit boilers are manufactured with a closed combustion chamber with a capacity of 24 kW and 30 kW, with an open power of only 24 kW. Single-circuit Baxi boilers are manufactured with a closed chamber with a capacity of 24 and 30 kW, with an open combustion chamber: from 15 to 62 kW.

Floor standing gas boilers Baxi SLIM intended for heating residential and non-residential premises... Baxi boilers are available with open as well as closed combustion chambers. For the combustion process, air is supplied to the open chamber directly from the very room in which it is located. Air is supplied to the closed chamber from the street through a special chimney, which is more comfortable option... This is especially important for residential premises. In addition, gas boilers Baxi SLIM are offered by the manufacturer as single and double-circuit. It should be borne in mind that single-circuit boilers are intended only for heating the room, while double-circuit boilers both heat and provide hot water... In double-circuit boilers there is a built-in boiler from of stainless steel with a capacity of 50 or 60 liters for hot water... If necessary, to single-circuit boilers you can connect boilers with a capacity of 80 or 120 liters made of enamelled and stainless steel.

Floor-standing gas boilers Baxi SLIM are presented in various modifications. Boilers can be marked as follows:

• the numbers 1 or 2 in the model name indicate the number of circuits in the boiler (1 - single-circuit, 2 - double-circuit);
• iN - model with an open combustion chamber, without hydraulic accessories (pump, expansion tank, pressure gauge);
• i - model with an open combustion chamber, with hydraulic accessories;
• FiN - model with a closed combustion chamber, without hydraulic accessories;
• Fi - model with a closed combustion chamber, with hydraulic accessories.

Advantages of Baxi SLIM series boilers

Boilers Baxi SLIM have a number of advantages. They are equipped with the necessary controls to ensure they are safe work... For example, the minimum gas pressure switch will put the boiler into standby mode if the gas pressure drops, and when it resumes, it will resume its operation. All boilers are characterized by a compact design and modern design... Thanks to the built-in electronic system self-diagnostics, automatic detection of up to ten different types possible malfunctions the operation of the heating system.

The long-term operation of the boiler, as well as the savings in gas consumption, is ensured by the presence of continuous modulation of the flame instead of step switching. Manufacturers provide uninterrupted work boiler in case of differences in gas inlet pressure, as well as automatic protection from freezing (when the water temperature drops to 5 degrees). The boilers have a built-in weather-compensated automatic system. By connecting an outdoor temperature sensor, it is possible to automatically change the heating in accordance with the outdoor air temperature. In double-circuit boilers Baxi SLIM the presence of an antibacterial protection system is provided. Thanks to its activation once a week, the ecological safety of the water supply for the consumer is ensured.

Represents floor-standing cast-iron gas boilers of increased power of the Slim HP series. These boilers are a continuation of the Slim series of floor-standing boilers, popular in Russia, and have three models with a capacity of 83, 99 and 116 kW. Last year, more than 10 thousand Slim floor boilers were sold and installed in Russia. Thus, we can safely say that Slim boilers are one of the most popular and best-selling foreign-made gas floor-standing cast iron boilers in Russia.

At the same time, the number of Slim boilers sales in Russia is growing from year to year. The maximum power of Slim boilers is 62 kW. Fulfilling the numerous wishes of its partners, BAXI offers models of increased power of the Slim HP series. The prefix "HP" in this case is translated as "high power" (High Power). The Slim HP series is a series of high efficiency gas boilers with atmospheric burners.

All models of this series are made in a gray case with a black control panel, like the classic Slim boilers. The fundamental difference between BAXI Slim HP boilers is the design of the cast-iron heat exchanger. In classic Slim boilers, the heat exchanger sections get deeper with increasing power. This concept limits the maximum output of Slim boilers to 62 kW (due to the requirement for uniform gas distribution along the cylindrical burner).

Therefore, a cast-iron heat exchanger developed by the French design bureau of the BAXI Group holding was used for the Slim HP series of boilers. Slim HP heat exchanger sections are widened. Its patented unique design consists of sections assembled with hydraulic steel manifolds. This arrangement of the heat exchanger gives a number of undeniable advantages in comparison with the classic nipple assembly, for example: low hydraulic resistance of the heat exchanger cavity and the compact size of the heat exchanger.

In this case, only one is used for assembly. wrench... The sectional heat exchanger made of highly ductile eutectic cast iron with profiled ribs has a large heat exchange surface and excellent aerodynamic properties. The Slim HP series boilers have all the necessary controls and safety devices. A draft sensor built into the draft stabilizer will stop the boiler in case of problems with the chimney.

Two-stage work gas burner monitors the ionization electrode of the flame and in case of flame extinguishing, the gas valve will immediately close. The overheating thermostat, installed in the front section of the heat exchanger, will stop the boiler in case of overheating of the boiler. Thanks to the increased layer of fiberglass insulation placed under the casing, and the well-thought-out design of the boiler, the maximum efficiency for atmospheric boilers is achieved equal to 92%.

The Slim HP series boilers are equipped with a two-stage gas valve. The first stage is 60% of the nominal boiler output. Slim HP series boilers operate steadily at reduced gas pressure, maintaining the safety of ignition and stable combustion at an inlet gas pressure of 7 mbar, which is undoubtedly an advantage in Russian conditions. A particularly smooth ignition is achieved with the aid of an auxiliary pilot burner.

Boilers of the Slim HP series are equipped with a simple and reliable panel control with the ability to connect room mechanical or programmable thermostat BAXI... Optionally, you can install an additional control panel with the possibility of weather-dependent regulation, boiler control and programming the operating modes of the DHW and heating circuits. Such an Albatros2 automation from Siemens turns the Slim HP boiler into a progressive automatic system to maintain the microclimate in the building.

To create boiler houses of high power, the Slim HP series boilers can be installed in a cascade using a special accessory - a wall-mounted cascade regulator. The main advantages of the cascade control unit are uniform loading of boilers, a stepwise increase in thermal power and uniformity in the development of the resource of each boiler.

Based on all of the above, it is safe to say that cast iron boilers the Slim HP series from BAXI are a worthy addition to the Slim line, a reliable and flexible solution, both when creating individual system heating, and in the case of work in a cascade to provide warm and hot water to large rooms.

The choice of equipment such as a gas boiler is always taken seriously.

Cost, as well as that important role, which the device will perform, are forced to carefully study all the options.

Having thought of purchasing a Baxi gas boiler, most likely you are looking for information about the manufacturer, models and user reviews. We offer a complete overview.

BAXI GROUP is a large holding company operating in Europe since 1866. What is not produced under the Baksi brand! From cast iron baths and enameled utensils, to equipment operating from solar energy... In general, everything related to heating and microclimate in the house.

In terms of sales volume, Baksi ranks third and on Russian market(since 2002) presented big choice its products.

Types of boilers Baxi

The company is interested in the presence of all possible options, for any circumstances and financial capabilities.

• One-
• Double-circuit.

If in the first version only the house is heated, then the double-circuit boiler also supplies the consumer with hot water. Both options find their adherents.

Connecting a pair of devices in one housing gives aesthetics, space saving, maintenance of only one device. On the other hand, separate water supply and heating are considered more reliable, less equipment wears out.

• Wall models.
• Outdoor.

Wall-mounted appliances are usually low power, neatly mounted on the wall, and can even be "hidden" in a kitchen cabinet. More powerful boilers inevitably have big sizes... Therefore, their installation requires a solid foundation and a separate room. The choice here comes down to calculating the required capacity by the size of the housing.

• Open (atmospheric).
• And a closed (with a turbine) combustion chamber.

An open combustion chamber is also called a chimney, since for the normal removal of combustion products, a draft is required here, created by a long gas duct (similar to a chimney).

In a closed or turbine combustion chamber, a fan creates thrust, so you can no longer run the chimney through the roof, but make a small coaxial pipe leading through the wall. This option is convenient for apartment residents, minimizes installation costs, but makes the heating system tied to electricity (the way out is to install a UPS, but this option will cost more).

Floor standing boiler Baxi Slim

If at the end of the name of the Baksi boiler model is the letter F, this means that it has an open combustion chamber. Example: Baksi ECO - 5 Compact 1.24F

• Convection.
• Condensing.

The principle of convection underlies the operation of any gas boiler: the flame heats the coolant, and some of the heat escapes into the pipe.

In condensing models, a heat exchanger has been added, on which hot gas condensation and additional heating of the coolant occurs.

Their strengths and both options have disadvantages. The presence of an additional heat exchanger requires more complex maintenance, the device itself is more expensive and more volume. A convection boiler is simpler and cheaper, but the efficiency is lower.

Range

For convenience, Baksi boilers are combined into lines under a common name, with common features... And within the line, devices may differ in power and other characteristics. Let's consider separately wall and floor options.

Wall mounted gas boilers Baxi

• Main;
• Eco Four;
• Baxi Four Tech;
• Eco Compact;
• Luna;
• Baxi Nuvola.

Wall mounted boiler Baksi

Main characteristics:

• Baxi main(means "Main, main"). Wall-hung gas double-circuit boiler in which a bithermal heat exchanger is installed.
• Eco Four- this is double-circuit boilers with two separate heat exchangers. Copper hydraulic pipes.
• Four Tech- modification developed on the basis of Eco Four. Due to the fact that the supply pipes are made of plastic (not copper), the cost of the devices is reduced.
• Baxi Eco Compact- a model similar to the Eco Four but more compact.
• Baxi luna- for the most part, double-circuit (except for model 3 1.310Fi) boilers. Self-diagnosis system, underfloor heating mode, all protective functions, lcd display.
• Baxi Nuvola- a large-capacity boiler is built into the structure. They can be with atmospheric or turbine chamber. Copper heat exchanger.

Wall-mounted boilers

Single-circuit

Models with only one heating circuit:

• ECO-5 Compact 1.14F;
• ECO Four1.14 and also with F;
• LUNA 3 Comfort1.240;
• ECO Four1.24;
• Luna-3 Comfort 1.310Fi.

The average price for such models is 28 - 47 thousand rubles.

Single-circuit boilers

A popular model in its class: Baxi ECO Four1.14 (power 14 kW, chimney diameter 120 mm, overall dimensions 73 x 40 x 29.9 cm, with circulation pump, an air vent, an 8-liter expansion tank, weight 25.5 kg, self-diagnosis, LCD display, copper heat exchanger, average price 28 thousand rubles).

Dual-circuit atmospheric

• ECOFour 24F;
• ECO-5 Compact 14F;
• ECO4S 18F;
• Main 5.14F and 5.24F.

Prices for atmospheric-type double-circuits also range from 27 to 37 thousand rubles.

Popular model in the class: Baxi MAIN-5 14F Average price 27.5 - 28 thousand rubles.

Double-circuit turbocharged boilers

Boilers with a turbine combustion chamber and having two circuits can cost 77 - 103 thousand rubles.

These, for example, include models:

1. Moon Duo-Tec1.28;
2. Duo - Tec Compact Ht 1.24 Ga and others.

An example of a popular pet at an affordable price: Baxi Luna3 Comfort 240Fi. Technical specifications: Power 25 kW. dimensions 76 x 45 x 34.5 cm.Weight 37 kg. Chimney diameter 60/100 mm. Copper heat exchanger. About 14 liters of hot water are produced per minute. Price 35 - 40 thousand rubles.

Centerpiece gas boiler is a burner. You can make such a device yourself. For manufacturing instructions, see the article.

You can read consumer reviews about Conord gas boilers.

Lemax gas boilers are quite popular. Affordable prices and wide the lineup- the main advantages of the devices. In this topic, in detail about the characteristics of the devices, as well as an overview of the models.

Condensing

1. Luna Platinum +;
2. Moon Duo- TecMpi +;
3. Duo-Tec Compact;
4. Nuvola Duo - Tec +.

The latest developments and technologies have been introduced into the condensing models. Each of them can be in one- and two-circuit design. The technology adapts to the conditions (pressure drop in the line, adaptive combustion control, etc.). They can also be converted to liquefied gas. Stainless steel heat exchangers. Electronic control, lcd display. The power of various models is 12 - 32 kW.

Luna Duo - Tec Mp is the only type of boilers with increased power (they can only be in a single-circuit design), while the models are compact, which allows them to be placed on the wall. Devices can be from 33 to 110 kW. They can also be combined in a cascade of up to 16 boilers.

If you need a wall-mounted boiler with increased power, pay attention to Baksi Luna Duo - Tec Mp (single-circuit condensing).

Gas floor boilers Baxi

The choice of outdoor Baksi models is not as great as wall-mounted ones. The most demanded line is SLIM. The devices have a cast-iron heat exchanger and can be rated from 22 to 107 kW. Case width 35 cm.

Condensing

1. Power Ht45-150 (stainless steel heat exchanger).
2. Power Ht230-650 (silumin heat exchanger).

Super-powerful boilers of a new generation (the numbers in the model name indicate a possible heat output in kW). Provided cascade connection to provide heat to large objects. The width of the units, however, is only 45 cm.

Atmospheric

• Slim 2.230 i;
• Slim 1.230 i and in;
• Slim 1.150 i;
• Slim 1.620 in.

In addition, the entire SlimHPS and Slim EF range is available with atmospheric burner.

The body is horizontally located (at a height of 1 m, width 1.14 - 1.24 m). Weight 266 - 380 kg.

SlimHPS has a sectional cast iron heat exchanger. Power 78 - 107 kW. Distinctive feature this series - in gas automation with a thermocouple to prevent gas flow when the flame goes out. The thermocouple is a non-volatile element, so the boiler remains operational when the electricity is off, for natural circulation liquids. Power 22 - 60 kW.

How to choose a Baxi gas boiler?

The approximate power of the boilers is taken at the rate of 1 kW per 10 m 2 of housing area. However, such calculations are very approximate and do not take into account the degree of insulation and heat loss through the windows. In addition, they are not suitable for double-circuit boilers also because it is necessary to lay the power consumption for heating water.

Double-circuit boilers must be purchased if the house does not have hot water supply in principle. In case of seasonal and emergency shutdowns, it is better to purchase a separate water heater (instantaneous or storage).

For hard water, it is advisable to choose the ECO series, where the heat exchanger will not be as severely affected as in other models.

Possible malfunctions, reviews

According to reviews, for the most part, Baksi have delicate electronics.

Sensitive equipment can be poorly tolerated or completely break down due to voltage surges that occur in the network quite often.

And the more expensive and more complex the unit, the more vulnerable it is to poor-quality power supply. Buyers taught by bitter experience, strongly advise not to save on the UPS and be sure to install it before the first start-up.

It is imperative that the socket is grounded. By the way, there are opinions that the Luna series has more reliable electronics than the rest.

Help to cope with breakdowns service centres, of which there are many in the vastness of the country.

So, Baksi equipment can be selected for any opportunity and taste. The cost of the units themselves is relatively low (especially when compared with solid fuel or pellet boilers). However, delicate electronics and sensors often break down and bad user experience is reflected in many reviews, along with positive ones.

Baxi boilers are very popular due to their autonomous operation and reliability. and the device of the unit, read carefully.

Which gas heater better to choose for a tent, see. Helpful hints optional and price overview.

Video on the topic