Some confuse quartz-vinyl tiles with ordinary PVC (polyvinyl chloride), therefore believe that this material is not too environmentally. Why so, not very clear, because, we all grew up on pVC floorswhich were decorated Soviet apartments and nothing, all living-healthy.

Read the article, and you will learn how harmful to health quartz-vinyl tiles for the floor, what it is in general, as well as what is the difference from others outdoor coatings.

What is the quartz-vinyl tile made of?

As shown in the photo, the quartz tile consists of three layers and polyvinyl chloride, which is all terribly afraid - at the very bottom. Then the quartz sand goes, the thing is very safe and environmentally friendly, and the polyurethane film covers this "sandwich".

So what is it all fear? Here is this very film from polyurethane. But is it worth it? After all, this material is used everywhere, not only for the manufacture of construction and finishing materials, but even clothing (for example, eco-pieces for jackets) and condoms, and for those people who have allergies to Latex.

Yes, if you strongly delve and lay out the material on the Mendeleev table, you can be afraid. See which items there are present:

• Arsenic
• Phosphorus
• Phenol
• Tertiary amine

It is so, not even fifth of the whole "kneading". But, if you figure it out further, it turns out that all these substances can be harmful in one case: if the material is warm up to 200 degrees. And how can it be in ordinary apartment? Already in no way.

Even at the very good heating In winter, the air temperature will not rise to a critical mark, in which evaporation and kill you will begin to stand out of polyurethane.

The same applies to the Polyvinyl chloride itself. It is also safe until the moment it does not warm up, then phosgene and cyan stands out. So, it is not worth it just to heat it up to 200 degrees, and that's all (the system "warm floor" also does not produce such a temperature).

What is the difference from ordinary PVC?

Surely, many of you remember tile PVC soviet production: Pink and green squares, which were decorated all new buildings of the time. It was a very durable coating, agree.

The only thing that was bad in this tile was buried and feared hot. That is, if you are inappropriate to leave a hair curler on the floor - the coating melted.

But the quartz-vinyl tile - fire-resistant and from the curl is definitely not deformed. That before burning in the sun - everything depends on the manufacturer and on the presence of a protective, ultraviolet layer. If you take a tile of a solid firm - it will be twenty years old will maintain a primordial appearance (however, the Soviet PVC tile also fastened very much.

Myths about quartz vinyl tiles

In addition to fears on the topic "Ecology", quartz-vinyl coating Heated and myths. No wonder. Any new Material In the market - a sickle blow on ... competitors. Here they also deal with rumors with an incredible speed, in order to neutralize the enemy, concerned about their part of the clientele.

Therefore, before you believe any widespread opinion, it is worth it to read and search for information, and then draw conclusions.

So, what are the myths about the quartz vinyl for rumor from the people?

Myth 1: Quartz vinyl is short-lived and soon sands with a surface.

That's just worthless nonsense. Sand is sand, but it comes from stone sand, quartz. And quartz is the most durable mineral in the world, after diamonds, of course. And it is pressed with the help of plasticizers who do not destroy 15 years, at least, or even all 25. Is it a small service life of the floor covering?

Myth 2: This coating is cold, because it consists of stone.

But besides the stone, there is a substrate - PVC (polisin), quartz sand there is a very small layer and on top of it all covered with polyurethane. That is, there are no quartz sand to the screed, and the tires, which means it can not carry out the entire cold of concrete.

And from above, such a tile can not become cold, since the temperature in the room, as a rule, degrees 25 and the material "picks up" this temperature, and not cement.

Quartz-vinyl tile even warm laminate!

Myth 3: Quartz-vinyl tile is incompatible with heated floors.

Everything is compatible there. To warm up vinyl before evaporation go, it is necessary to set fire! And if we are talking about that it deforms from the temperature drop is also past, as this material is plastic, unlike the same tree, which is critted from heating and frost.

Myth 4: This tile is also easy to scratch, like linoleum ...

And in general, Quartz-Vinyl is the same linoleum, only chopped with slices.

Not. This is perfect different materials And compare them incorrectly. Quartz-vinyl tile is very durable, it is not "afraid of" heels, scratches and furniture legs, unlike linoleum.

In the fortress, this coating, more, can be compared with laminate. That is, such a tile is a soft laminate, roughly speaking.

Myth 5: Such a tile can burst from shock.

So think, because it consists of pressed stone sand. But, due to the fact that the sand is mixed with plasticizers, there is a soft substrate from below, and from above - a durable protective film, these tiles are simply impossible to break. And they do not crack from strikes.

As you can see, in all respects, quartz-vinyl tiles - just a wonderful choice for the kitchen.

It is not afraid of neither blows or scratches, no water.

And in price it comes out a little cheaper ceramics, and walking on it more pleasant.

Myth 6: It is difficult to put on your own.

No, it is very easy to put. It has a lock design, like a laminate, but it turns out and it can be trimmed with a simple building knife.

What to navigate when choosing

Choosing a quartz-vinyl tile for the kitchen, first of all, pay attention to the manufacturer. If you take the goods of an unknown company (Chinese, for example, from the market), then such a tile may be not only poor-quality, but also harmful.

Because, in the case of China, you can never be sure that they are made by "quartz-vinyl". It can be a completely different composition, externally similar to quartz-vinyl, which pointed you with phenol and without any heating.

See certificates, buy in constructionarkets, give preference to firms that are not the first ten years on the market, for example, Tarkett, FineFloor. These plants produce high-quality floor coverage for decades, so they should be trusted.

Quartz-vinyl tile - a good choice To finish the floor kitchen and in the apartment, and in a private house. If you are planning to repair, be sure to consider this option, since, judging by the reviews, this is a decent thing.

Quartzinyl tile is not so common among consumers. However, it has many positive features and is a type of polyvinyl chloride coating with the addition of quartz sand. Among the ingredients, the latter is contained in the amount of from 60 to 80%. This material is the second hardness.

Vinyl with additives is contained in a volume of from 20 to 40%. If you still did not decide whether it is worth purchasing this material for finishing, then you should familiarize yourself with his technical characteristics, pluses and read the reviews of real consumers.

True on the coverage of PVC and quartz

Before buying one or another finishing material, you need to read reviews. The whole truth about the Quartzinyl tile, presented in the article, will allow you to draw up an objective opinion on this cladding. It has high fire safety and high strength, almost does not support combustion and does not ignite.

The tile during operation is not covered with scratches, does not be ashamed, which is provided by a protective layer of polyurethane. It is possible to use the coating in wet conditions, because it is not afraid of water exposure and has anti-slip characteristics. The texture of the surface may be smooth or embossed.

Tile has antibacterial and antiseptic properties. This coating is perfect for the trading hall, because it has high stability to loads. Such a wide variety of advantages determined the area of \u200b\u200buse of the coating in the premises not only domestic, but also commercial purposes.

Characteristics in terms of structure

The consumer will help to know the whole truth about Quartzinyl tiles reviews. You can also follow the example of buyers and familiarize yourself with the opinions of buyers. However, before purchasing it is important to pay attention to the structure. This material is multi-layered and consists of PVC with the reinforcement of fiberglass and base layer from polyvinyl chloride.

The decorative layer can imitate any texture, and quartz is added to the primary. For anti-slip effect, the surface is covered with a protective substance. The multi-layeredness does not mean that the material should turn out to be thick. Quartzinyl tile can be limited next parameters: from 1.6 to 4 mm. However, the coating remains very wear-resistant.

Characteristics from the point of view of laying methods

Tile can be laid with glue, it can have a castle compound or self-adhesive internal surface. In the latter case, the glue is already applied to pour park And closed with a film that will need to be removed during installation.

Main advantages

It is impossible to be called an accident that the demand for a quartzinyl tile is tirelessly growing. This is explained by the fact that the material has numerous advantages. Among others should be highlighted with a high degree of wear resistance and strength. The minimum life of such a coating is approximately 15 years. It will be longer, but in this case we are talking about trouble-free service. Material Sustainable K. external influences, it does not fade over time, even if exploitation will be implemented under influence sun ray.

Coating thermo- and moisture resistant, easy to maintain and easy in montage. Separate parts if necessary, you can replace, and this is deprived of many other coatings. When using cladding in the bathroom, it is possible to create a high degree of comfort, because the floor is obtained very warm. Having visited the store, you can choose the texture, form, color, as well as the method of fixing the tile, which opens up many features before designers. The cost of this remains adequate.

Basic Disadvantages

It is impossible to consider the finishing material only from the point of view of positive features. Be sure to take into account also disadvantages. The impressive weight of the flooring is calculated to the latter, which is determined by the presence of quartz rocks and complex composition.

If you also wondered about what the flaws of quartzvinyl tile, then the need to create a perfectly smooth surface before laying the material should also be taken into account. It is flexible, so the depressions and elevations will remain noticeable and will be felt if the floors are not previously aligned.

Benefits of Moduleo Tiles of Belgian production. Reviews

The whole truth about the Quartzinyl tile Moduleo, the reviews of which will be presented below will allow you to understand whether it is worth buying such a coating. Many consumers believe that this facing, which is called the manufacturer of vinyl laminate, has great quality And it is also good because it is proposed for sale in a variety of sizes.

The tile is quite often compared with consumers with analogs. However, the Belgian floor covering is presented in block and elongated versions. The material is the embodiment of high quality vinyl coatings. Products have a multi-layered structure, and at their basis high-strength polyvinyl chloride with a protective polyurethane layer. Thickness is 4.5 mm.

Consumers like that the tile possesses the type of natural material, it is warm to the touch and soft. Castle Quartzinyl tile, reviews and the whole truth about which helps consumers make right choicemay be laid without special knowledge and skills. At the same time, special glue is not required. Installation can be performed independently. In each package of laminate, you can find instructions that simplify work. Requirements for the base of floors are minimal.

As one of the main advantages of the tile, consumers highlight moisture resistance. All this is perfectly combined with resistance to sunlight and damage. After reading the whole truth about Quartzinyl tile, you probably want to buy it, because it is made with a focus on natural natural appearance Woods and performed in warm colors. Vinyl floors correspond to environmental standards. Even with careless handling on the surface there will be no scratches, so you can lay such a coating in the kitchens, bathrooms and children's rooms. Tile can become an excellent choice that will give the house completely different color.

Specifications: composition description

Quartzinyl tile, reviews and advice on which should help you make the right choice, consists of several layers. The lowest is vinyl. It provides a reliable coating clutch with the base of the floor. Next comes a layer of glass fiber film, which not only strengthens, but also forms vinyl. Quartzinyl interlayer ensures strength with the desired flexibility. This layer is also needed for heat, as well as sound insulation.

The top layer is decorative, it is he who is responsible for the shade, texture and drawing. Quartz-vinyl PVC tile for the floor, customer reviews about which you could read above, has polyurethane protection. It strengthens the decorative layer and extends the life of the product.

Specifications in terms of wear resistance

In order for the finishing material to serve as long as possible, it should be selected according to the class of wear resistance. Creased is determined by the thickness of the polyurethane layer, which is the last. To date, several varieties are known. If wear resistance is ranging from 23 to 31, then such a material is suitable for household use. The tile can be laid in the zones of small passability. Protective covering This finish is very subtle, it does not guarantee a long service life that does not exceed 5 years.

Quartzinyl tile, real Reviews About which are presented above and must be read by you before going to the store, it may relate to 33-42 wear resistance classes. If you have seen such a material, then you are coating a commercial discharge, which is characterized by a higher strength and is suitable for rooms with medium permeability.

If the material refers to the 43th durability variety, the elements have a thick layer of polyurethane, providing limit strength and durability. Such tile can be used even in garages where proper montage It will be able to serve about 40 years. Reviews of specialists about this class of tiles are unambiguous, they are expressed in the fact that the coating will exercise their top Qualities at high loads.

Finally

Quartzinyl tile, reviews and the whole truth about which are presented in the article, has many important characteristics For floor coverings, among them should be highlighted: flexibility, strength, as well as practicality. All these qualities manager managed to achieve a special technology that provides for the use of pressure during production. Due to this tile remains plastic, but it does not crack and does not burst under the influence of gravity.

Before you make a choice, it is necessary to read the entire truth about the product. Quartzinyl tile, the reviews about which were presented above are offered for sale in a variety of options, textures and colors. All this allows the consumer to choose a coating that can be used in different destinations.

The prototype of the usual vinyl coating is quartz-vinyl tilewhich on external and aesthetic signs is similar to its analogue, but has distinctive features in the structure, characteristics. It is these differences that made the material of the sales leader.

By structure from ordinary vinyl floor quartz-vinyl It differs, first of all, the presence of an intermediate layer between the upper decorative and lower, responsible for durability and strength. The middle layer is made of quartz of a very small fraction (sand quartz), due to which the following parameters have been reached:

• increased wear resistance due to increased strength and hardness;
• characteristics meet the requirements of the flooring 43 class (for large loads, intensive operation: trading rooms, offices);
• lack of deformation when laying on the surface with small defects (for laminate with lock assembly).

If you want the floor to serve for more than 30 years without affecting the elegance of the interior, then you need quartz-vinyl tile, buy Which can be in the GC "Vinyl Paul".

The process of manufacturing quartz-vinyl

Production technology is more complicated than in the manufacture vinyl tiles, therefore, on quartz vinyl tile Price higher than an analog without a quartz layer. To create an extraproof floor, there are quartz sand, which is subjected to hot pressing process. The carrier layer in the material remains vinyl. With this method, all layers are tightly connected to each other, forming one holistic panel.

The innovative floor is made in the diversity of decors. For aesthetic species corresponds to photoslas, imitating rocks of wood, a natural stone And other textures. From above, the material is covered with a protective polyurethane layer, due to which the ability of the coating to be resistant to scratches, mechanical spoilage, water, fat stains, other aggressive factors.

Types of quartz-vinyl coatings

PVC flooring is produced in four versions:

1. Mechanical - CLICK connection like a laminate;

2. The glue - SMART lock, the planks are glued together;

3. Free-hearty - planks lie close to each other;

4. On the glue - the planks are glued directly to the floor.

Quartz-vinyl floor is divided by wear-resistant classes, has various qualitative and technical characteristics.

Wear-resistant classes

43th class of wear resistance (protective layer 3 mm). Laminate for rooms with intense passage stream, large loads on the floor. Used, as a rule, in gym, production workshops, warehouses etc. Features of the 43th class coating - anti-slip and antistatic properties of the upper layer, increased elasticity. Life of about 20 years.

32nd - 42th class of wear-resistant (protective layer 2.5 mm). Coating for public premises. Life of about 12-15 years.

23rd - 31st class of wear resistance (protective layer 2 mm). Coating for household premises with low traffic intensity. Life of about 7 years.

Vinyl laminate quartz composition

In the composition of the vinyl floor there is quartz sand, it makes the coating durable, the vinyl itself gives the plastic laminate planks. High fire resistance and wear resistance manufacturers are achieved due to the polyurethane layer, thanks to the floor, the floor can withstand all mechanical effects. In addition, the vinyl floor has 100% water resistance, you can use it for placing the pool or bathroom.

Benefits

Thanks to the development innovative technology The manufacture of quartz-vinyl flooring material has acquired operational advantages:

• resistance to hydraulicity. Spilled water or frequent washing Do not cause raising the edges or increasing tiles in volume, as a result of which flooring can occur;
• resistance to temperature drops. The laid quartz-vinyl laminate can maintain its initial characteristics in a unheated room or periodically heated ( country house or cottage). It is ideal for rooting coverage on a "warm floor";
• ecology. The outer layer has an antibacterial composition, so the floor does not affect the change in a favorable microclimate and does not cause health problems in humans and animals;
• easy service. On the floor, walk in dirty or wet shoes can be left without a risk forever. Laminate is easy to clean, can be cleaned with a brush, as well as to be treated with washing soap solutions to maintain sanitary purity.

All modern quartz-vinyl floor covering has quality certificates, meets high European safety standards.

Advantages of PVC Pola

• Huge wear resistance of vinyl (quartz-vinyl floor will serve you very long years).
• 100% water resistance (the ability to use in any room with high humidity).
• Environmental friendliness (possesses 100% environmentally friendly, which is confirmed by global certificates).
• The possibility of laying vinylovye PVC coatings On any old floor.
• Vinyl flexibility allows you to lay it on not the perfect floor.
• . Possibility of laying on the warm floors.
• Quartz-vinyl floor is easy to care.

Application

The manufacturers created a quartz-vinyl floor tile, which is able to maintain its beauty and strength under the legs of a large flow of visitors or workers, under the paws of animals in the house, under heels of any size and thickness. A new coating is able to meet the stringent stability requirements for similar loads, so it is suitable for:

• commercial institutions (cafes, restaurants, nightclubs, hotels);
• office premises (conference rooms, receptions, assets, work offices);
• public buildings (libraries, temples, stations);
• household, residential facilities (apartments, houses, cottages).

Dry or just awatened quartz-vinyl floor remains safe for walking, as it is absolutely not slippery.

Another pleasant advantage is simple, quick installation with your own hands. You can save money both on the installation and on the repair of one or several tiles. All this is possible thanks to the method of installing the Clusk system.

Quartz-vinyl floor has the following installation options: Castle, Adhesive, Smart Castle, "Free". The first view has a castle of a collapsible type Clusk, with which two elements of the floor are densely connected, one of them can be dismantled and replaced with a new one if necessary. The adhesive option is less common, it has difficulty in installing and dismantling. But the applied glue to the surface of the purified floor allows you to achieve 100% waterproofing in the case of flooding of the room. If the SMART lock is provided, the planks are glued together. But with a free-sided method of installing the plank lie close to each other.

Outside of floor coverings on the NTV channel

Quartz-vinyl floors are a durable coating, characterized by a high degree of wear resistance. Initially, the use of such floors was considered exclusively industrial purpose. The flooring of quartz-vinyl tile has perfectly proven itself as a coating suitable for places with very high pendant and movement of the wheel transport. For some time, quartz-vinyl tiles began to be used as a finishing material for the floor in the apartments. Professional reviews indicate that the domestic use of this material has become possible due to serious changes in its design design. What is the floor tile based on quartz sand?

What makes tile make?

The main component of the composition of the tile is quartz sand, whose share, depending on the material model, is from 60 to 80%. Other elements that perform their functions are used to produce floor coverings. The quartz sand itself provides high-strength, resistance to high humidity and refractory.

The remaining components: vinyl, plasticizers, stabilizers, pigments - improve the properties of the tile and are responsible for the aesthetics of its appearance. Thanks to plasticizers ready Material They acquire some flexibility necessary during the installation process, and stabilizers are fencing the flooring from light and temperature effects. This or that color material acquires due to the addition of special pigments, achieve the effect of imitation of any texture allow special additives.

As the top layer of tile, manufacturers use polyurethane, metallized political and other means to help simultaneously give the coating an attractive look and protect themselves from external influence.

Quartz tile used for floor finishing is a multi-layer material. The coating structure from the bottom up looks like this:

• 1 layer - PVC base, which ensures the stability of the coating and good adhesion of the glue with the base of the floor;
• 2 layer - fiberglass performing a reinforcing function;
• 3 layer - directly quartzvinyl, is a central layer;
• 4 layer - a decorative layer responsible for the relief, drawing and color of the finished coating;
• 5 layer - a protective transparent substrate, protects the drawing from fading;
• 6 layer - polyurethane layer, increasing wear resistance and chemical resistance.

Pros and Cons Tile

Quartz-vinyl tile has its advantages and disadvantages that must be studied before making a purchase. The merits of the material include high wear resistance, which allows to apply the material where there is an intensive movement of people and machines. The use of such material in everyday life allows you to guarantee a long service life of the floor covering. If one of the finished floor tiles come into disrepair, it can be easily replaced with a new element. You can make a replacement with your own hands without attracting specialists.

Among the advantages of quartz-vinyl tile should be noted fire safety, antistaticity and resistance to humidity. Moisture resistance of the tile can be estimated almost 100%: due to its composition, it is not afraid of water at all. Thanks to the main component of the composition - quartz sand - the tile does not support combustion and does not allocate toxic compounds.

One of the advantages of quartz tile in front of other floor coatings is also excellent sound insulation quality material. The coating has the ability to repay shock noises to 19 dB, which provides a comfortable atmosphere in the room.

The quartzinyl tile for the floor is produced in a wide range, you can choose a material with the design of the surface that is suitable for your apartment. The tile is easily and quickly mounted, it is simply removed and it is worth it, but with all the listed pluses of materials should not forget about the presence of flaws of the material.

The main disadvantage of the use of quartz tile for finishing the floor is the need for high-quality preparation of perfectly level. Before installing the tiles, it is necessary to put hydro and thermal insulation: these works are carried out at mandatory, otherwise the finished floor will be cold and uncomfortable for moving. To create a smooth base, the fill of the screed is most often done, which extends the time repair workSince it should dry for several weeks.

Choose tiles

When choosing a tile, you need to pay attention to several points: manufacturer, size and thickness of elements, wear resistance and color solution. The most popular today by quartz tile manufacturers are Upofloor, Armstrong, Rikett Flooring, Polyfloor, Art Tile. Material is produced in the form of squares and rectangles different sizes With a thickness of 1.6 to 3.2 mm.

Color solutions Polyfloor tiles.

The most commonly used quartz coating type is a square tile with a side of 30 or 60 cm. Such elements easily fit and allow you to create a single web without a specific pattern. Manufacturers produce tiles in the form of rectangles and triangles. Such materials are suitable in the case when you want to assemble the floor with an unusual pattern. If necessary, the tile can be cut into curvilinear elements: parts are manufactured using the water cutting method. Preparation of such elements is possible only in the factory and requires additional costs for the preparation of the sketch and the cutting process itself. The result of the work will eventually become an exclusive floor covering with an original pattern. You can estimate the effectiveness of such a finish method in the photo of finished floors.

Quartz-vinyl floor tiles may have a thickness of up to 3.2 mm, the maximum thickness allows the material to the highest 43 wear resistance class. Acquire such a tile for finishing floors in the apartment is not necessary, the coating with the greatest thickness refers to the group of industrial materials, the use of which in residential premises does not make sense. Materials 23-42 of wear resistance classes, characterized by a thickness of 2-2.5 mm, are suitable as an outdoor coating for the apartment. A more subtle quartz tile can only be used where there is a small permeability.

In the case of abrasion, the quartz-vinyl tile is also divided into several categories, the best of which is the category "T". Most quartz tile models, which is now sold on russian market corresponds to this particular category. The material class "T" is very strong, resistant to chemical substances, including alkalis and acids.

When choosing tiles for its apartment, you should pay attention to the category of flammability and the smoke-forming ability of the material. Quartz tile for decoration of apartment floors must be responsible to categories M-2 (refractory) and D-2 (smoke formation). Acquire the material of higher categories for household purposes inexpedient.

The design of quartz tile is selected based on your personal preferences and the general idea of \u200b\u200bthe interior of the room in which the repair is made. You can choose the desired drawing or imitation of natural texture. different colors and tones.

Installation of quartz tile

Quartz-vinyl coatings can be mounted in two ways: with or without glue. In the first case, the floors are collected from elements that are attached to the base on glue, in the second - from tiles with a lock connection. The latter method is good because the need for clutch with the basis is missing, it is not required to buy a special adhesive composition, and the assembly and disassembly of the floor are carried out as easily as possible. The elements of the tile are connected to each other on the principle of "spike-groove". The indisputable advantage of this method of mounting quartz floor is the ability to disassemble the coating without damaging the material.

Tile with the fastening "spike-groove".

Laying quartz-vinyl floors with glue is more complex in performance. For installation you will need special glue. Acrylic glue and vinyl compositions on a rubber-based basis are suitable as a fastener, but best option is an special compositionwho recommends the manufacturer of your chosen tile.

Laying quartz tile begins with preparatory work. First, it is necessary to dismantle the old coating and thoroughly align the working surface. After dismantling the previous finishing layer, it is necessary to remove the construction trash, and then put all the cracks and cracks. Working surface Must be perfectly smooth: all convexities and pits should be eliminated. If it is not possible to align the base, then resort to the help of an aligning screed.

Next, you can proceed to the attachment of the tile itself. This makes the markup of the starting point and the laying line of the coverage elements. Then glue is applied to the placed area with a spatula and the tile itself is applied. On top of the tile, you should walk several times with a roller, it is necessary to smooth the coating. Corner and extreme tiles, if necessary, trimmed to the required parameters. All excess glue is neatly removed with a sponge or rag.

Quartz-vinyl floors are not very demanding on the installation conditions, but the reviews of experts say that it is necessary to comply with some rules. Quartz tile should be laid on a dry base whose humidity should not exceed 5-6%. Floor elements are laid on the glue covered surface not immediately, but a few minutes later. For achievement best result Experts advise comply with the recommendations of tile and glue manufacturers. The instruction of the adhesive composition contains full instructions By its use.

The need to severely press the tile to the floor is absent, the material and so stick to the base, but the excessive pressing in separate places may disrupt the unity of the canvas. For good gluing elements, there is enough two-sized roller rolling. There should be no distance between the tiles themselves, but at the junctions with the walls it is recommended to leave small gaps, which are then filled with sealant.

To ready coating There was an attractive appearance and excellent strength, the working base should be smooth, and the air should not penetrate under the installation process during the installation. Additional treatment of a tightly laid quartz-vinyl tile is not required, but in rooms with high humidity it is recommended to carry out the processing of the joints between the elements using cold welding.

Each of us tries to make their living space ergonomic and comfortable, and a significant role in the arrangement. country house Or an urban apartment playing outdoor coverage. But one aesthetic qualities is not quite enough. Choosing a coating, you should not take hasty solutions and focus only on appearance and cost, since these criteria do not affect the quality of the product.

The choice must be consistent and thoughtful, then it will turn out to transform the interior with a fairly high-quality coating and forget for a long time about the dismantling works and different unpleasant alterations. To do this, it is better to use quartz vinyl tile.

The tree contributed to the creation of the atmosphere of heat and coziness in the house, but there were disadvantages. Over time, it hurt and cracked. Linoleum was much more practical, but the poverty of choice for designer design, did not give a chance to get a highly aesthetic result.

Laminate or linoleum on floors looks perfectly, but, unfortunately, these materials are not so durable as piece ceramic products. Ceramic tile It corresponds to the indicator of the prolonged operational period, but it is not entirely durable and when mechanically exposeds can split, which will finally violate the integrity of the coating.

Fortunately, today the situation in the materials market has changed, and we have the opportunity to get a lot of alternative solutions.

The advantages of vinyl floors

Vinyl floors have become a good replacement for expensive parquet, and now, thanks to various functional characteristics, it became possible to create original design compositions, filling the interior of the premises with individual details, connect various textures and forms.

Vinyl floors combined the advantages of laminate, wooden floors, Linoleum and at the same time are completely devoid of their flaws. As the manufacturers tell us - this is almost a unique flooring. But is it true? In this article we will deal with the disadvantages and advantages of vinyl floors, carefully consider qualitative characteristics.

Production technology

The relatively low cost of vinyl coating is due to simple production technology. It is based on the method of hot pressing polyvinyl chloride, quartz crumbs and mass of inert fillers and various components. And although the vinyl floors consist of non-human elements, this coating is quite safe for people regarding toxic discharges.

Types of vinyl coatings

Vinyl coating is manufactured in three versions - these are rolls, rectangular tiles and vinyl laminate. They are divided by wear-resistant classes and have various qualitative and technical characteristics.

Wear-resistant class The main characteristic that pays attention to when buying an outdoor coating.

Wear-resistant classes

- 43th class of wear resistance (protective layer 3 mm). Vinyl coating for rooms with intense passing flow and large loads on the floor. Used, as a rule, in gym, production workshops, warehouses etc. Features of the vinyl coating of the 43th grade - anti-slip and antistatic properties of the upper layer, increased elasticity. Life of about 20 years.

- 32nd - 42th class of wear resistance (protective layer 2.5 mm). Vinyl coating for public premises. Life of about 12-15 years.

- 23rd - 31st class of wear resistance (protective layer 2 mm). Vinyl coating for household premises with low traffic intensity. Life of about 7 years.

Advantages of quartz vinyl tile

Quartz-vinyl tile perfectly combines the entire universal set of high-quality parameter and has properties that make it possible to use it almost in any room. Manufacturers managed to combine in one coverage the entire list of necessary criteria, which symbolize that this material is really qualitative and reliable.

Composition of material

The material contains quartz sand, which gives coating strength, the vinyl provides the plasticity of the created composition, and high heat resistance and wear resistance is achieved due to the application of the upper layer of polyurethane, which is able to withstand any mechanical loads.

In addition, the polyurethane layer has a high moisture resistance, so this coating can be used in the bathroom, in the kitchen, in the lobby and in other rooms, as the material is stacked in the joint, which completely eliminates the penetration of moisture to the roughing base and has additional waterproofing protection in The form of glue. The material has a high thermal stability ratio, which completely eliminates the deformation when the temperature regime drops.

Range

Special attention deserves a wide range of coatings, in the lineup presented great amount different texturesimitating any finishing material. In the modern collection is presented wide selection Texts - tree, slate, ceramics, stone. High indicator Frost resistance allows the use of quartz vinyl tile on open veranda.

Self-adhesive floors

Taking over with the types of vinyl coating, a separate group can designate self-adhesive floors - on back side applied adhesive material closed special protective film. This coating greatly facilitate the laying and boring yourself with the choice and the search for you will not have to. The cost of such a coating is not normal above.

Protective layer

Quartz-vinyl tile is covered with a protective layer, which has the highest - 43th class of wear-resistance. He is not afraid of the fall of heavy items, impact chemical substances, Tile is resistant to scratches and other damage. The protective layer gives the tile anti-slip effect, which reduces the risk of possible drops and injuries.

Coating structure

The structure of the coating of multilayer and consists of 5 parts:

1. The base (layer of glue with a protective film), in other words, this is a self-adhesive floor.
2. Layer of polyvinyl chloride (main layer).
3. Decorative layer with image. There is a very rich choice of both monophonic coatings and various drawings (patterns, images, imitation natural materials etc.)
4. Transparent polyvinyl chloride layer, which is protected from ultraviolet.
5. Polyurethane layer treated ultraviolet rayswhich protects the coating from mechanical damage.

Advantages of quartz-vinyl coating

• Resistance to mechanical damage (with proper use and care, vinyl will serve you for many years).
• Waterproof ( high humidity Not a hindrance to use vinyl in bathrooms and bathrooms).
• Durability (period of operation of up to 20 years, depending on the class of wear resistance).
• The possibility of laying self-adhesive tiles on the old flooring.

disadvantages

• Since the tile is quite flexible, then the ideal base is needed for laying. IN otherwise Floor disadvantages will be noticeable.
• Self-adhesive tile can not be glued on cement screedIn such cases, it is better to purchase products with the "Schip-Paz" fastening.
• Required additional insulation Floor (unfortunately, the vinyl coating has a small thickness).
• Pretty high cost.

conclusions

With the help of quartz-vinyl tile, you can embody any designer fantasy. A variety of design decors of vinyl floors allow you to create similar types of flooring. The floor from vinyl is easy to care: to remove contaminants, it is enough to walk with a damp cloth.