How to remove limescale from tiles. How and what to quickly clean the tiles in the bathroom

Tile is a traditional, practical and aesthetic material. Its main and perhaps most important advantage is its durability. But ceramics requires special care, so it is important to know how to clean the tiles in the bathroom, how to restore shine, color saturation to it, removing stains and residues of detergents.

To really quickly clean ceramics from plaque, dirt deposits in the bathroom, first of all, it is worthwhile to deal with the nature of their origin, and then start working. The bathroom systematically uses water containing lime and various salts. Getting on the base, it leaves stains that resemble smudges of a light shade with a rough surface. Accumulating, they are converted into lime, it is difficult to clean it.

Mold and mildew are the most dangerous contamination in the bathroom

But the most serious situation is fungus, old mold, the reasons for the formation, which may be:

increased moisture content;
accumulation of dirt in the seams between tiles;
systematic contact with running water;
high temperatures;
reproduction of microbes;
lack of systematic care with the use of antiseptics.

Get rid of plaque or mold immediately, otherwise it can adversely affect not only the appearance of the ceramic base, but also your health.

How to get rid of old mold and harmful fungus

If things are not so bad, then you can use antifungal solutions to clean the gaps between the ceramic base, which is applied to the problem area for 30 minutes. Then everything is well washed with water, wiped dry with a sponge.

How can I clean the tiles in the bathroom if there is no special cleaning agent? A well-known bleach (1 part per 10 liters of water) or soda, which neutralizes an unpleasant odor, will come to the rescue.

Folk remedies for removing plaque

How to wash bathroom tiles to remove limescale deposits? This question is of interest to almost every housewife. Perhaps the most common way is to clean the ceramic base with special household solutions.

You can get rid of streaks or lime deposits using the following:

lemon - to clean the ceramic base, take a fresh lemon wedge and rub it over the problem area. You can add lemon juice to the water, then process the tiles on the floor and walls, after such treatment, the room will be filled with an exquisite citrus aroma;
soda with vinegar is an excellent home remedy to get rid of deposits and dirt. The reaction that occurs due to the mixing of the two products softens the deposits. Soda is first applied to the ceramic base, and then vinegar is sprayed;
ammonia - not only will get rid of plaque, but you can use it to cleanse the oil. Dilute alcohol in water, then apply to the surface. Everything is very simple;
bleach - you need to clean the floor and walls with gloves to protect your hands from the harmful effects of the solution. Chlorine removes limescale well, but can discolor joints and damage ceramic tiles but at the same time it removes oil well.

Folk remedies

How to clean tiles after a renovation is complete

The repair is over, but here's how to now clean the tiles so that they shine by removing the remnants mounting material: sealant, cement, primer, silicone glue or oil. Uncomplicated processing of a tile with a rag will not suit us:

construction cement;
silicone sealant;
assembly dust, including primer;
grout;
dye;
lime;
construction foam.

Adhesive mortar and silicone sealant

If, after the repair is completed, the tile needs to be cleaned of glue, you will come to try. You can use the following options:

removing soft matter - the best way to get rid of the solution is to wash it off during masonry. A simple rubberized spatula is suitable for this, as well as a damp cloth;
softening - if the silicone sealant is already frozen, then it is better to use ammonia or vinegar. For polymer masses, acetone is suitable, but only the tiles should be cleaned carefully so as not to damage the surface;
exposure to chemistry - silicone sealant can be removed using a special solvent-based product;
by mechanical grinding - how to soften the sealant, remove it with a hard sponge or spatula.

Deleting silicone sealant spatula

More serious tools are required to remove adhesive from ceramic tiles.

We remove the primer and cement

After the renovation, do you still have white spots on the ceramics? You can remove them using some components:

acetone;
special wash;
construction foam.

Oddly enough, it is recommended to apply fresh mortar to the stain to remove the primer or cement. After the composition has completely softened, it should be well cleaned. Also, primer or cement can be easily removed with a sharp-blade scraper.

It is best to rinse off the primer before it hardens with pure water or solvent

Grout

At the end of the repair, you still have traces of grout, it does not matter to remove it much easier than a primer or cement. It is as easy as shelling pears to remove traces of grout, when it brightens, rinse the floor and walls with plain water. The layer will soften, then you can easily remove it, like a whitewash.

This method is suitable for a soft composition.

The tiles are washed from the grout with plain water immediately after the repair, as soon as upper layer will begin to brighten.

It is much more difficult to cope with epoxy mortar. If a drop of a substance hits the ceramics, it is better not to suffer and purchase a special solvent. To prevent this kind of contamination, it is best to use masking tape or film. With construction dust everything is as easy as shelling pears, any household chemicals are suitable here.

Preventive measures

Systematic washing of ceramics will allow you to constantly maintain perfect order In bathroom. Wipe the floor and walls with dry soft cloths. Due to this, drips or limescale do not turn into dried drops that do not look so aesthetically pleasing. If the dirt irritates you very much and you want the base to shine, then a glass cleaning liquid or any other non-aggressive detergent is suitable.

If you want your floor to shine, then baking soda, dishwashing detergent, mirror and window cleaner are the best options. You can remove smudges with a soft cloth dipped in vinegar, previously diluted with water 1 to 5. To remove grease, it is recommended to use a pure oxidizing agent.

If you need, then better way than a solution of water with chalk can not be found.

It is best to remove dirt on the tiles immediately with clean water.

Professional detergents

There is a huge selection of cleaning agents in any store. But when purchasing them, you should adhere to the following recommendations, namely:

choose cream-shaped or liquid formulations, as the powder leaves small scratches on the surface;
a composition containing chlorine is perfect, which neutralizes pollution and disinfects the room;
products with chalk are not recommended, as it leaves streaks;
the product with alkali and acid is also not suitable for the maintenance of walls and floors, because it can harm between tile joints;
you should also refrain from purchasing organic solvents.

Contamination reasons

Knowing what kind of dirt and why appear on the tile, you can choose the right cleaning agent and take timely preventive measures.

Types of tile pollution

Limescale. Even after cleaning, the water contains salts and lime. Splashes fall on the tiles, dry, leaving whitish rough streaks. Accumulating in one place, these streaks form stable lime crystals that are difficult to remove.

Soap drips. Shampoo, gel, soap have similar substances that, when they get on the wall, leave white streaks. Especially soapy stains are not tolerated by a glossy surface: it becomes matte, loses its shine.

Care products: hygienic and cosmetic. Shampoo, bubble bath or shaving, Toothpaste, the gel leaves a trace on the tile. If these contaminants are not removed in time, plaque will form.

Mud spots. Dust, dirt after washing shoes, the floor, in the absence of regular cleaning of the surface, can also accumulate on the tile.

Home remedies for the care of tiles

Removing limescale, soap deposits and other dirt from the tiles will help:

Lemon

It is possible to remove stains, limescale if the place of contamination is rubbed with a slice of fresh lemon. Another way is to squeeze lemon juice into a bowl of water, treat the tiles with the resulting solution. In addition to removing stains, lemon will fill the room with a pleasant scent. Fresh fruit can be substituted with citric acid powder.

Soap solution

This option will do only if the tiles are regularly maintained. The soapy water will wash off the tiles if they are not yet white. The procedure starts from the top, moving down. After washing the walls with soapy water, wipe the surface dry, moving in the opposite direction.

Soda and vinegar solution

The reaction between these two substances helps to deal with stubborn deposits by effectively softening them. The cleaning procedure is carried out as follows: soda powder is poured onto a damp sponge, the agent is applied to the treated area, after which table vinegar is sprayed on top.

Vinegar

A weak concentrated solution is used, for example 6%. The most convenient way to treat the walls is by pouring vinegar into a spray bottle. Spray the product onto the walls. Wait 5-10 minutes for the substance to penetrate into the depth of the dirt, after which you can rub the tile with a soft brush, without applying excessive force. If the result is not satisfactory, spray the product again. At the end of the procedure, the tiles are washed warm water and wipe dry.

Ammonia

It copes well with plaque, dirt and mildew. It is diluted in water and then wiped on the surface. You can get rid of a specific smell by leaving the door to the bathroom open.

Dentifrice

It sounds strange, but tooth powder does an excellent job of staining tiles. To do this, the powder is diluted in water, the resulting mixture is poured into a bottle. Spray the product on the walls, wait until it dries, and polish with a soft cloth.

Chlorine

A multi-purpose product - removes limescale deposits, restores a shiny shine, and kills germs and mold. Bleach powder is diluted in water, sprayed with it on the walls. Leave on the surface to act for 5 minutes, then rinse with warm water.

Important: the use of bleach can lead to discoloration of the seams.

How to properly clean tiles

Dealing with dirt on tiles is easy if you follow these guidelines:

Sweats, splashes should be wiped off immediately after they appear.

Rub the tiles to a shine once a week.

Do not use abrasive or highly corrosive substances for the maintenance of the tiles. Clean the surface only with a soft cloth or sponge, not a hard-bristled brush. Coarse fibers, abrasive particles are dangerous for glossy tiles: they leave scratches, spoil the coating.

Pay attention to the joints between the tiles. The seams must be treated with an anti-fungal agent. During cleaning, do not apply active acidic agents to the cement grout.

If you preliminarily soften the mud deposits, this will significantly speed up and facilitate the cleaning process. To do this, open the tap with hot water for a few minutes, allowing the steam to settle on the walls, thereby affecting the dirt.

After basic cleaning of the tiles, you can spray a vinegar solution onto the tiles. This will make the glossy surface shine. Matte tiles are covered with special wax mastic.

Finish cleaning the tile surface by thoroughly wiping the tile until it is dry. A microfiber cloth is good for this.

The cleaning effect will last longer if after each water procedure wipe the tiles dry. This will help prevent limescale build-up.

18 August, 2016
Specialization: Master in Construction plasterboard structures, finishing works and styling floor coverings... Installation of door and window blocks, decoration of facades, installation of electrical, plumbing and heating - I can give detailed advice on all types of work.

In this review, we will figure out how to wash the tiles in the bathroom and what measures allow you to keep the surface in perfect condition for a long period of time. I often deal with tiles in my practice, so at one time I understood what affects appearance material and how with minimal cost time and effort to achieve cleanliness in the room. I will focus on folk remedies, since they are often no less effective and at the same time more affordable.

Overview of the main options for work

I will divide all activities into two large groups: cleaning limescale and other contaminants and fighting fungus and mold. Naturally, the second case is more difficult, but if you do not run your bath, then you are unlikely to have to deal with it. Below I will show you how to prevent mold.

Fighting limescale with special products

When people ask the question: “how to wash the tiles in the bathroom to make them shine”, in 90% of cases they mean “how to remove limescale”. And this is not surprising, because it is because of it that the surface loses its shine, and the quality of water in our country is such that it is simply impossible to get rid of this nuisance.

I will list all the most popular options and tell you about each of them in more detail and in detail, but you need to start with specialized tools that are sold in stores.

It makes no sense to list all the names - they are already heard in numerous advertisements, they are about the same in efficiency and cope well with fresh bloom, but if you have more difficult case then I can recommend the following options:

"Silit Bang"	In my opinion, one of the most effective means v difficult situations, it can be used to deal with limescale, rust and soap stains. Also, the composition perfectly breaks down grease and gives the surface a shine, it is suitable for both tiles and plastic, glass and stainless steel. As for the cost, about 400 rubles will have to be paid for a spray bottle with a capacity of 750 ml.
"Domestos"	Deals well with different kinds pollution, fights mold in the initial stages, and also, according to the manufacturer, kills all known microbes. It is best to use the spray version because of its convenience and ease of use. The price of a bottle with a capacity of 750 ml is about 280 rubles
"Mister Muscle"	This composition copes well with lime and soap deposits, dissolves fat and kills germs. Also, when cleaning, almost no streaks are formed, this is actually so, although it all depends on the cleanliness of the room - if plaque has accumulated there for years, then it will not be possible to quickly clean the surface. As for the cost, the last time I saw this composition at 265 rubles per package of 500 ml
"Comet"	Another widely advertised brand that produces a wide range of products for cleaning the bathroom and other spaces. The spray from this manufacturer copes well with plaque and gives the surface a shine, with its help it removes both grease and dirt well. A package of 500 ml will cost about 240 rubles, the release form is a spray

Since we are talking about cleaning products, we cannot but touch upon the issue of their quality. Unfortunately, counterfeit products are still often found, which in their characteristics are far from the original products, so as not to fall for a fake, try to be guided by a few simple rules:

Buy products only in those stores that have been on the market for a long time and have proven themselves well among customers. The market and kiosks are the places where you are most likely to buy a low-quality option;
Pay attention to the packaging - in the originals it is always neat, without flaws and defects;
Examine the label carefully, it should be bright, all inscriptions are well readable. I have come across variants in which there were errors on the label, here the origin of the product is immediately clear.

Remember one simple truth, an original product on the market cannot cost several times cheaper than in a store. Do not listen to the assurances of buying at a wholesale price, stores take disproportionately more lots and, following the logic, there should be a lower price.

Fighting plaque with improvised means

Many of those who do not know how to clean the tiles in the bathroom do not want to use special means due to their chemical aggressiveness and insecurity for human health. But there is whole line less aggressive products that do an excellent job with plaque and give shine to the tile:

Lemon - its juice does an excellent job of removing plaque and makes the tiles shiny, I would not recommend rubbing the walls with this fruit, it is much easier to squeeze the juice out of it, dilute it with water and rinse the walls and floor with this mixture, in addition to cleanliness, you will get natural freshness in the bathroom. Instead of lemon, you can use citric acid, which is diluted in warm water before use;
You can take vinegar essence, dilute it and pour it into a spray bottle, then spray it on the surface to be cleaned. The treatment is repeated every 2-3 minutes, after several applications you can wipe the surface and enjoy the cleanliness and shine. An additional advantage of this option is that vinegar effectively fights mold and prevents its development with regular use;

A solution of ammonia is often used for cleaning glass and mirrors, but it is no less effective when cleaning tiles. To do this, the solution is applied to the surface, and after a few minutes the tile is wiped off, alcohol dissolves plaque well, and its property of giving shine is well known to almost all housewives. The only drawback is that the composition is not very pleasant, so it is better to work in a respirator or ventilate the room well;

Ammonia (in fact, ammonia is a weak solution of ammonia): this composition is used when it is necessary to clean up strong contaminants. It is unlikely that it will be possible to work here without a respirator, but in terms of efficiency this option will give odds to many specialized teams, so you have to endure inconvenience if you want to get the best result;
Previously, cleaning at home was most often done with ordinary bleach. This unpleasant-smelling powder, which must be handled exclusively with gloves, is still in demand today when it comes to cleaning difficult dirt. In addition, the composition kills all microbes, which is important to prevent the formation of fungus in the bathroom;

Finally, the option that I consider to be one of the most effective when it comes to old limescale and stubborn dirt. In order to remove all impurities, you must first apply baking soda soaked in water to the surface, and then pour vinegar on top. A violent reaction cleans the tiles very well, and you will see an obvious difference after using this remedy;
One more good remedy- a mixture of baking soda and hydrogen peroxide, if you do not know how to wash the dirt in the joints between the tiles, try this solution. It is necessary to pour soda into the container and dilute it with peroxide to the state of a paste, which is subsequently applied to all difficult areas, after 10 minutes you can lightly rub the surface with a sponge, most often this helps to cope with dirt.

It can be concluded that when it comes to tiles, the answer to the question of what to wash to make it shine will be any option that removes limescale, because it is because of it that the ceramics tarnish.

Removing mold

If black spots appear in your bathroom, then it will take a lot of effort to remove them, as this is mold. If you do not fight it, then over time the problem will reach simply enormous proportions and you will have to remove all the trim and carry out numerous treatments in order to get rid of this problem.

Let's figure out how to clean the surface from mold in order to completely get rid of the problem. I will tell you about the most effective ways that have proven to be effective:

The safest solution is to use a special steam cleaner that delivers hot steam under high pressure and removes mold and mildew from the material, while simultaneously destroying spores. Not everyone has such equipment, but it is better to find a specialist and hire him, since, in my opinion, there is nothing more effective than steam in removing mold in the bathroom;

Previously, no one thought about how to clean the mold: the already familiar bleach was used, its ability to kill bacteria and remove plaque from the surface is exactly what is needed to completely remove fungal deposits, unless of course they have penetrated deep into the material;
Mold on the seams between the tiles can be removed with your own hands using soda ash... It is applied to the grout, after which, with the help of a brush, all plaque is removed from the surface, the process is long and difficult, but if you decide to get rid of the fungus, you will have to spend a lot of time and effort.

If none of the above measures helped, then the only option would be a complete replacement, the instructions for carrying out the work look like this:

First of all, you need to remove all infected grout., for this, the easiest way is to use a special device with replaceable blades, which helps to quickly and efficiently clean the joints;

Using a stiff brush, the remains of the composition are cleaned, you can walk with a powerful vacuum cleaner in order to remove as much dirt as possible. After that, the seams are treated with an antiseptic, it is important to apply it inside so that it hits all surfaces;
When the composition is dry, you can start applying a fresh fugue, it is applied to the seams and rubbed... The bathroom is immediately transformed, and if you do not start it, then such problems will subsequently be avoided.

How to prevent problems from occurring

If you do not want to rack your brains over what is the best way to wash stubborn stains and how to restore the shine to the surface, you should follow a few simple recommendations:

It is advisable to wipe the tile surface with a damp cloth, since fresh plaque can be removed without any means. Do this at least where water most often gets on the surface and you will not have problems with limescale for a very, very long time;
If the bathroom does not have a high-quality ventilation system, then the room will be constantly damp, which, coupled with the high temperature, will inevitably cause mold formation over time. Therefore, during repairs, be sure to install a fan that will forcibly draw out moist air;

Once a week, the surface needs to be thoroughly cleaned, how to wash the tiles in the bathroom, we figured it out, you need to choose the best option and use it.

Output

If you clean the tiles periodically and use high-quality products, then the problem with hard-to-remove plaque will never appear. The video in this article will help you understand some of the nuances even better, and if you have questions on the topic, then ask them in the comments.

August 18, 2016

If you want to express gratitude, add clarification or objection, ask the author something - add a comment or say thank you!

A bathroom is a room that evokes associations with cleanliness and brilliance. However, this is not always the case. Many housewives are looking for information on how to clean the tiles in the bathroom from fungus and plaque, since this pollution spoils the whole impression of the room.

Contamination reasons

To cope with stains on your tiles, you should be familiar with the causes of their occurrence. Knowing all the nuances, you can quickly return to the ceramics initial appearance... The bathroom often uses water, which contains lime and various salts. When these elements fall on the tile, they leave streaks, which later turn into lime. It is quite difficult to eliminate this type of pollution.

Mold with a fungus appears due to:

high humidity;
the presence of dirt in the seams between the tiles;
constant contact with tap water;
impact high temperatures;
reproduction of bacteria;
neglect of surface care.

Funds

Bathroom tile cleaners are available in many stores. The following products are popular:

Cillit bang copes well with limescale, rust. The special composition helps to break down fat and impart an attractive gloss to the surface.
Domestos will help remove mold and all germs from the bathroom. It is most convenient to use a spray.
Mr Muscle not only actively removes lime and soap stains, but also helps to get rid of greasy marks and microbes.
Trademark Comet proposes wide choose products that help in cleaning the bathroom and other rooms. The spray can quickly remove plaque, grease and dirt.
Melamine sponge is an alternative to chemicals. The sponge consists of melamine foam that penetrates the pores of the tiles and removes plaque and dirt.

Many housewives prefer to use home remedies that are found in almost every home. The most popular are the following methods:

A combination of vinegar and baking soda. These ingredients remove lime and salt in 10 minutes. Using baking soda-free table vinegar will not only help you deal with dirt, but also get an attractive shine on your tiles.
With citric acid, you can get rid of the dirt on the tiles. You will need to rub the surface with lemon juice or citric acid. After processing, the walls should be wiped with warm water.
The ammonia fights lime, fungi and dirt. Please note that this substance has unpleasant odor, therefore, you should observe safety measures when using it. As a rule, to this way resorted to when cleaning the joints between the tiles.

Data folk methods you will be able to quickly and painlessly remove various dirt for tiles.

detergents with acid content;
abrasive preparations;
brushes with coarse teeth;
metal scouring pads;
it is forbidden to clean the surface with powders intended for manual use;
substances used in the dishwasher;
products for cleaning ovens and sinks;
substances intended for the toilet.

How to remove stains?

To remove stains from the tiles in the bathroom, you need to decide what kind of pollution you plan to deal with. Each type of stain has its own effective method... Many grab their heads after repairs in the bathroom, as the sealant and traces of rust seem, at first glance, an overwhelming task.

Limescale

Many housewives are faced with a problem when lime hits the surface of the tile, absorbing into the grooves between the ceramics and into other cracks. With the help of purchased products, you can qualitatively clean the tiles until a mirror shine appears. Products designed for dirt different types that attack the surface of not only walls, but also the floor. Many products contain disinfectants that eliminate fungus and germs.

In order for the product to shine the tiles in the bathroom, pay attention to the composition of the substance.

You should not buy products that contain acids and cleaning agents. You also need to carefully study the instructions for using the selected drug. Best result show gel-like products, as they are more convenient to use and more effective.

A good result in the fight against lime was shown by a glass cleaner with ammonia. You will need to spray on the desired area, and then simply wash the tiles on the wall.

Grout

Many people have faced a situation when after the repair there were grout marks on the tiles. This type of contamination is easy to remove. Wait until the grout becomes lighter and wash the tile surface with water. When the layer is softer, it can be easily removed.

Epoxy resin harder to remove. It is best to immediately use a special tool that is sold in the store.

To exclude such situations, you should use masking tape or film when grouting.

Sealant

You will have to work hard to scrub the dry sealant crust off the tile. To eliminate contamination, you can use the following methods:

Try to remove the substance during laying. For these purposes, you can use a rubberized spatula or a damp cloth.
If the sealant is already dry, it is suitable to remove it. ammonia or table vinegar. Acetone is effective against the polymer mass, but in this case, the tiles should be cleaned carefully.
Silicone is well removed by products that use a solvent.
You can also use sanding to soften the sealant. Then use a spatula or hard type sponge.

Ingrained dirt

In the bathroom, you should monitor not only the surface of the walls, but also the cleanliness of the floor. Its surface is also exposed to moisture, soap solutions and other items. Dirty floors are not only ugly, but also dangerous. Such a floor can even injure its owner, since it is easy to slip on it.

When working with floor tiles, you can use abrasive detergents. Unlike wall tiles, it is more abrasion resistant. The following methods are also recommended:

If light-colored tiles are used on the floor, clean with warm water and a little soda ash. One pinch is enough.
Dark colored tiles should be washed with warm water and liquid detergent for floors.
If the dirt is severe enough, moisten the floor and sprinkle baking soda on the surface, then scrub with a brush. After a while, you can spray on the vinegar. Substances are removed with a mop.
On floor tiles there is an anti-slip coating, so it is recommended to immediately wipe the floor if water gets on it. Observing this rule, it will be easier for you to return the shine to the tile.

Welding

When replacing pipes in the bathroom, you may need a grinder. After using it, the tile becomes covered with black dots, which leads many housewives to panic. How to get rid of welding marks on tiles:

It is better to take care of such a situation in advance. Take preventive measures. Cover the areas around the pipe with a cloth, securing the ends of the material with masking tape. Polyethylene should be discarded as welding will burn such a surface.
Caked metal droplets can be removed with hydrochloric acid. Dilute the solution with a low concentration and apply it to the desired area for 10 minutes. Do not inhale acid vapors, it is hazardous to health and carry out activities with gloves and a mask.
At the end of the reaction, only iron salts will remain on the tile. They can be easily washed with cold water... Only craters will remain in place of the drops, and it will not be possible to get rid of them.

Based on these recommendations, you should take care in advance to prevent the appearance of welding drops on the tile. In case of welding contact with tiles, you should immediately consider buying a new tile, since craters are very noticeable on a light glazed surface.

Rust

To remove rust from tiles, you can use different ways cleaning:

Cream of tartar. This substance sold in powder form. To remove rust, sprinkle powder on the desired area and wipe it with a sponge dampened in water. To speed up the procedure, pre-treat the surface with 3% hydrogen peroxide.
Vinegar and baking soda effective in the fight against rust. Wear rubber gloves. Soak a sponge with 6% vinegar and sprinkle generously with baking soda. When the two substances react, start processing the tiles.
Lemon juice with salt effectively removes rust on tiles. The juice can be replaced with citric acid. The required area should be abundantly moistened with juice and left for 25 minutes. Then sprinkle the surface with finely ground salt and use a circular motion to remove rust stains... Use only table salt without crystals and stones.

Removing mold and mildew

Mold can affect not only the joints of the tiles, but also the walls and ceiling in the room. It is necessary to fight the fungus at the initial stage, since such an education is harmful to the human body.

Many brands produce special products that help eliminate blackness on the seams of the tiles in the bathroom. However, the cost of such products is quite high. Alternatively you can use budgetary ways to eliminate fungus:

The steam cleaner is excellent at destroying germs, fights grease, dirt and mold.
With the help of "Whiteness" or bleach, you can say goodbye to mold for a long time. Leave the product on the surface for one hour and rinse plain water... Do not forget about precautions and the need to ventilate the room.
Mold can be removed from joints with soda ash and a coarse brush.
Hydrogen peroxide helps in bleaching the seams. This solution does not require rinsing.

How to clean the joints?

The joints that are located between the tiles can be cleaned using the following methods:

powder for washing clothes;
soda ash;
kitchen cleaner (use one without coarse abrasive).

To ensure that the grooves are cleaned without contamination, cover their surface with epoxy paint.

The joints are filled with a compound containing cement, resins, wax and glue. The ingredients create a rough and dirt-prone surface. You can wash them with "Whiteness". Cleaning is done with the tiles.

Toothbrush and toothpaste are also good for cleaning the spaces between tiles. When the seams are dry, cover the surface with acrylic. The paint forms a film that can prevent dirt from absorbing in the future.

If you can't clean the seams, renew the surface. Wipe off the top coat with vinegar. Do not use other components, as they can damage the tile. Already on a dry gap, grout can be applied, guided by the instructions. The surplus must be removed. Cover the joint surface with acrylic paint.

Surface features

Before removing dirt from a tile, pay attention to the features of its surface. There are subtleties to work with each type. For example, matte tiles are best and easiest to clean with special formulations... If the pollution is heavy, ammonia will allow you to clean the surface without streaks. Afterwards, you can use an emulsion for matte ceramics. This method will help keep the surface of the walls attractive and bright.

For a matte surface to shine, apply polishing wax to the dry ceramic. Many people prefer to save money and buy wax designed for car body treatment. It helps protect the bathroom walls, but washes out immediately upon contact with hot steam and water.

A simple, not laborious and inexpensive way to wash ceramic (tile) tiles to a shine. A concentrated solution of citric acid will cope with stubborn limescale on the surface of any tile in the bathroom.

The indisputable fact is that the tile (ceramic tile) is the best and perhaps the most popular finishing material today. And this is fully justified. We will not list its advantages. But there are still small nuances when using everyone's favorite ceramics. In particular, this applies to keeping our tiles clean. Regardless of the type of tile surface (glossy or matte), the quality of its workmanship, and regardless of whether it is old or new ... Most of all, this question concerns the bathroom.

Daily splashes, drops and streams of water leave a long-lasting, multi-layered limescale that simply won't wash off.

How to wash ceramic tiles to make them shine?

Usually, the procedure for cleaning tiles in the bathroom from plaque is very time consuming and ineffective. After a short time, you will need a strong chemical agent to remove the stubborn layer of deposited salts. These products are usually terribly caustic, poisonous, and often very expensive.

We offer an easy way to remove limescale deposits from tiles, or easier to scale. It does not require much physical effort, does not entail expensive financial investments. We will clean the ceramic tiles with a concentrated citric acid solution.

We'll need regular citric acid (available at any store), a water spray, and a brush or sponge.

Often, the citric acid cleaning tips recommend rubbing the contaminated surface with acid crystals (not diluted in water). We do not recommend doing this. Everything can be done much easier, safer and more convenient. Our method will save you from the need to rub, or rub anything into the surface to be cleaned to the point of exhaustion. We suggest to spray our product with a spray bottle.

To begin with, dissolve acid crystals in warm water to a saturated solution - in proportions of 1 to 2 (100 grams of acid per 200 grams of water)

Pour the prepared solution into a spray bottle.

And then just moisten (spray) abundantly over the surface of the tile.

For the safety of working with acid solution: wear rubber gloves, do not close the bathroom door during work, avoid contact with skin and mucous membranes.

For greater grip, it is advisable to grind the solution over the surface with a brush or sponge.

After that, you must wait until the solution reacts (interacts) with the limescale.

As it dries, white streaks form on our tiles.

But don't be scared - this is good sign... This means that our product has worked and coped with our pollution and the result is achieved.

The plaque can now be washed off with water.

White stains are washed off with the help of a shower and the same sponge or brush. If after a while white bloom again it will appear on the surface it is not scary. It's just that an incompletely washed acid solution has completed its task, and you just need to rinse the surface with water again.

After that, your tile will shine like new. And if it does not shine, repeat the procedure again and achieve the desired result.

Advantages of this method:

The method is absolutely environmentally friendly.
The citric acid solution is not harmful (it is even used for cooking).
Ceramic (tile) tiles do not deteriorate from exposure to citric acid solution. It is not abrasive and will not damage the ceramic surface.
It's cheap and affordable for everyone.
You do not need to exert much physical effort, just spray the surface with the prepared solution and wait for the result.
You do not have to wash the surface in this way often. It stays clean for quite a long time.

Disadvantages:

Only one - you, for some reason, do not like citric acid (you do not like its smell, allergy to this product, etc., etc.).

We will be glad if our method helped you in your tireless struggle for cleanliness!