this is a small, fully equipped and finished pumping unit is a hermetically closed plastic reservoir in which there are a pump with a "dry version" engine with a check valve in the pressure pipe, a level relay, valve valve with a coal filter of improved quality (no additional filters are required), electrical cable 1.2 m with Shuko plug. The pump automatically turns on when filling the tank (power level) and automatically turns off when emptying (shutdown level).

Vertical puming is 8.8 m, horizontally - 90 m

The design allows you to pump the drainage temperatures. up to 75 ° C With continuous mode of operation and up to 90 ° C within 30 minutes.

Sololift2 C-3 - small-sized, fully equipped and ready-to-install sewer pumping unit for pumping household goods wastewater (Without feces) from those premises in private houses from which wastewater can not be sent to the sewage system.

Sololift2 C-3 is usually used for:

• shower cabins
• washbasins,
• baths,
• washing machines (maximum 90 ° C)
• and dishwashers

in the mixing rooms below the level of sewerage, or in connection with the repair or modernization of existing buildings, when their location can be on the removal from the main sewage riser And not enough to establish a natural bias.

Sololift2 C-3 Suitable for installation under the washbasin, or especially suitable for mounting in limited space In structures near walls and built-in wardrobes. Low on / off levels are suitable even when used with a shower pallet.

Compact sewer pumping unit is equipped:

• Cable with plug
• Horizontal or vertical connection pressure pipe with multiple adapters for pipes with a diameter Ø22-40 mm
• Built-in check valve
• Electric motor, "dry" execution, with high efficiency, including heat protection, level relay and controller
• Fixed nozzles-eccentric (height adjustable) for pipes with diameter Ø36 or 40
• Have the ability to manually protect against clogging and separate drainage for maintenance
• Exhaust valve with overflow protection
• Luggage for fixing and installation

Installation design in accordance with EN12050-2 standard, with unique properties, quick installation, long term operation and simple cleaning.

Technical characteristics GRUNDFOS SOLOLIFT2 C-3:

Application: Sink, shower, bidet, bath,washer,dishwasher,kitchen sink

• Model number: 97775317
• Pump type: sewer installation
• Maximum consumption: 204 l / min
• Height: 34.1 cm
• Width: 15.8 cm
• Maximum pressure: 8.8 M.
• Weight: 6.6 kg
• Length: 49.3 cm
• Pump View: Surface
• Manufacturer Country: Serbia
• Service for 24 hours: Yes
• Warranty: 24 months
• Protection class: IP 44
• Insulation class: F
• Network voltage: 1 x 230 V
• Rated current: 3.1 A
• Maximum power consumption: 0.64 kW
• Mode of operation: 50% 1 min. (30 sec. Incl. 30 sec. Off)
• Permissible temperature Purchased liquid: up to 75 ° C
• ON / OFF level (from the bottom of the reservoir): 65 (115) / 35 mm
• Water quality: dirty

Contents of delivery: Adapters with the same outer diameter and different values internal diameter corresponding to the size of the pressure pipeline. Head nozzle, adapter, pipeline connected by clamp. The receiving pipes are allowed to displays a 10 mm connection, which facilitates the installation of the sewer unit.

Benefits: Operational reliability, simple care and maintenance, easy installation and replacement

Replacement Sololift + on Sololift2

We offer you to buy Grundfos Sololift2 C-3 by favorable price 24 050 p.

Grundfos Sololift2 C-3 has high quality and optimal price. The manufacturer is known all over the world and provides a guarantee for its products.

To buy Grundfos Sololift2 C-3 in our online store you need to place an order online on the site

Price, rub.

Article: 97775317.

It is a compact, ready-to-install, automatic sewer pumping unit. Used in buildings of any type for pumping gray drains without feces.
Installation is designed according to EN 12050-2.

Areas of use

Sololift2 C-3 is suitable for pumping gray waste from washing and dishwashers, bathtubs, soul, washbasin or kitchen sink. Installation is designed for frontal wall mounting. Professional design allows you to pump up the drainage temperatures up to 75 ° C, with continuous operation mode for 30 minutes to 90 ° C.

Typically, these installations are applied in the following cases:

• In the basement rooms below the level of sewage.
• In connection with the reconstruction or modernization of buildings in which it is impossible for water disposal due to the fact that sewage pipe Located at a large distance, for example, from the attic.

Opportunities and advantages

Strength and operational reliability

• The powerful electric motor ensures optimal operational reliability during pumping gray, at temperatures up to 90 ° C.

Easy installation and replacement

• Height-adjustable input and output connections provide lightness of installation and replacement.

• Two selected inclusion levels correspond to any application. In addition, due to the narrow design of the installation, it can be mounted in close places.

Simple care and maintenance

• Removable, compact node "pump-electric motor" allows you to perform any maintenance procedure quickly and clean.

• There is no need to disconnect the pressure and lines or dismantle the unit to perform maintenance.

Design and equipment equipment

Sololift2 C-3 comes with a reservoir from composite materialresistant to wastewater in which there is an observation cover.

Characteristics:

• Adapter (nozzle) for supplying pipelines Ø32 and Ø40.
• Two additional side submissions. One connecting insert with clamps is included in the package.
• Two side submissions with built-in check valves that protect against the reverse flow of the fluid.
• Adapter with a hose tip for connecting a washing or dishwasher.
• The ventilation valve with a coal filter, overflow protection and a built-in adapter for ventilation nozzle Ø20.
• Automatic pipe clutch for connecting the pump node.
• The pump and the electric motor integrated into one node are fixed in the tank with three mischief screws. Pump Pump Pump connected to internal pipeline The tank is fixed with an automatic pipe clutch inside the tank.
• 1.2 m cable and plug.
• Flexible connecting hose for suction pipes Ø32 and Ø40.
• Floor mounting supports, including screws and dowels.
• Check valve.
• Adapters for the injection pipeline with a diameter of Ø22 to Ø40.
• Drain hose with clamps and crane.

Technical data

Net weight	6.6 kg
Capacity reservoir	5.7 L.
Flexible headpipe	Ø22 / 25/28 / 32/36 / 40
Dimensions of possible entry	1 x Ø32 / 36/40, upper connection 2 x Ø36 / 40/150
Start and stop levels	Starting level 1: 65 mm above floor level Starting level 2: 115 mm above floor level Lean level: 35 mm above floor level
PH value pumped liquid	from 4 to 10
Maximum fluid temperature	75 ° C constantly 90 ° C for 30 minutes
Maximum pressure	8.5 M.
Maximum flow	204 l / m
Environmental temperature	from +5 ° C to +35 ° C
Operating mode	S3-50% - 1 min. (30 sec. Incl. 30 sec. Off)
Supply voltage	1 x 220-240 V - 10% / + 6%, 50 Hz
Power consumption, P1	Max. 640 W.
Rated current	3.1 A.
Power factor (COS)	0,66/0,90
Rotation frequency	2800 min-1
Protection class	IP44.
Isolation class	F.
Connection cable	1.2 m, 0.75 mm2 (H05VV-F-3G)

dimensions

Sololift2 installations have CE marking and the following certificates:

Sewage pumping unit Grundfos (Grundfos) Sololift2 C-3 A few years ago, the global leader in the production of Grundfos pumping equipment has released an updated version of the popular sewer installation Sololoft 2 C3 / This installation is a compact device (including all the necessary nozzles and connections for successful mounting), which has a high efficiency and is a hermetically closed plastic unit, relatively small sizes in which there are a pump with a dry version of the engine in which the return valve is built in the pressure pipe, as well as a level relay, a special ventilation built-in valve with an improved coal filter qualities that allows effective all sewage Stocks In your kitchen, bathroom shot (excluding toilet) and other similar rooms.

Pump type:	|Sewage installation |
Pump type:	Surface
Height:	34.1 cm
Width:	15.8 cm
Length:	49.3 cm
Weight:	6.6 kg
Mode of operation:	50% - 1 min. (30 sec. Incl. 30 sec. Off)
Protection class:	IP 44.
Network voltage:	1 x 230 V
Maximum power consumption:	0.64 kW
Water quality:	Dirty
The permissible temperature of the pumped liquid:	up to 75 ° C
Contents of delivery Grundfos. (Grundfos) Sololift2 C-3:	Adapters with the same outer diameter and different values \u200b\u200bof internal diameter corresponding to the size of the pressure pipeline. Head nozzle, adapter, pipeline connected by clamp. Fixing nozzles are allowed to displays a 10 mm connection, which facilitates the installation of the sewer unit.
Maximum consumption:	204 l / min cubic meters / hour
Maximum pressure:	8.8 M.
Insulation class:	F.
Rated current:	3.1 A.
ON / OFF level (from the bottom of the reservoir):	65 (115) / 35 mm
Application:	Sink, Shower, Bidet, Bath, Washing Machine / Dishwasher / Kitchen Sink
Benefits:	Operational reliability, simple care and maintenance, easy installation and replacement
Producing country:	Serbia
Service for 24 hours:	Yes
Guarantee:	24 months

Grundfos Sololift2 (Sololoft 2)this is a unique series of compact sewer pumping installations From the global leader in the production of pumping equipment, facilitating drain drains from any home plumbing, regardless of the system of self-reading drainage. Price The etiquatorization pumping installations will fully reflect their large functionality and high quality. Life term is designed for more than 10 years (as well as all the equipment of the company Grundfos.) , Warranty service life 24 months. Buy pumping unit Sololift2. (sololoft2.) You can in our company, for you always available the entire range of products and at your service highly qualified specialists who will help you choose the equipment you need.

Installations are collected and pumped out wastewater through a thin injection pipeline (\u003e 23mm) to the next overflow pipe - to a height of up to 6 m or to a distance of up to 100 m.

An additional toilet and a full-fledged bathroom in the attic or basement will no longer be only a dream, thanks to the use of SololifT2 WC 1 or WC 3, a also Sololoft 2 CWC 3.

The series consists of 5 compact options pumping installations For the diversion of household wastewater.

3 Installations sololoft. , and Designed for pumping wastewater from toilet bowl, sink, bidet, shower, washing machine and other plumbing.

2 Installations< Grundfos Sololift 2 C-3\u003e and Grundfos Sololift 2 D-2 Designed to pump out several sources (washing or dishwasher and sink).

Number B. legend symbols Models means a possible amount of additional intake nozzles (for example, a model Sololift2 C-3 It has 3 inlet nozzles). Sololift2. (sololoft 2. ) Designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and purity during service.

Installations are ready for use with a plug and work completely in automatic mode when water is supplied to the drain tank of the pump.In more detail with the work of Grunfos Sololift2 pumping installations, you can familiarize yourself.

Application

The pump is applied in cases where stock from plumbing equipment is needed, but no or impossible to use a self-use drainage pipe. Installations with a connection to the bathroom are designed only for installation in private homes or apartments. Other installations can also be used for commercial purposes.

WC-1, and designed to pump wastewater from 1 toilet, 1 washbasin, 1 shower or 1 bidet.
CWC-3. This is an additional flexible version designed to embed when installing in the front wall.

C-3 and designed to remove (hot) wastewater from bathroom, shower, washbasin, sink, washing machine and dishwasher.

Compact dimensions allow them to embed them into the front wall kitchen headset or bathroom, and in floor design elements.

Decoding model name.

Deciphering Sololift2 settings:

WC - the model has accession to the toilet and equipped with a cutting mechanism

C - model with compact design

D - model for shower and shell

1 - one additional attachment (not counting the toilet connections)

2 - two additional attachments

3 - three additional attachments

Attention! Installation of C-3 and D-2 models cutting mechanism are not equipped.

Compact sewer pumping unit is equipped:

Installation design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and simple cleaning.

Internal structure Installations Sololoft 2S3

Grandfos Sololift 2 C3 Installation Examples

Overall dimensions of the pump Grundfos Sololift 2 C-3

Net weight 6.6 kg Tank capacity 5.7 l Flexible pressure pipe ∅22 / 25/28/32 / 36/40 Dimensions of the possible input 1 x ∅32 / 36/40, Top Connection 2 x ∅36 / 40/50, side Start and stop levels Start: 72 mm above the floor level. Stop: 52 mm above floor level The pH value of the pumped liquid from 4 to 10 Maximum fluid temperature 75 ° C is constantly, 90 ° C for 30 minutes. Temperature ambient from +5 ° C to +35 ° C The mode of operation S3-50% is 1 min. (30 sec. Incl. 30 sec. Off) Rated current 3.1 a Power coefficient (COS φ) 0.66 / 0.90 Rotation frequency 2800 min-1 IP44 protection class Class of insulation F. Connecting cable 1.2 m; 0.75 mm2 (H05VV-F-3G). Power supply voltage 1x220-240 B, 5-Hz.

Installation replacement options Sololift +. Previous Generation on Modern Sololift 2

Sometimes situations occur when the pump with the grinding grinder is simply necessary. The most common of them include:

1. The construction of a new bathroom in the basement. His position was below the level on which the sewer network passes.
2. Repair or redevelopment indoors. At the same time, without transfer or the construction of a new bathroom, it is not necessary to do, and because of the long-distance entrance to the central sewer, the samotectal option is impossible to implement.

In these two typical situations (although they can be much more) it is difficult to come up with more suitable solutionthan a pumping unit with a shredder for a non-body toilet. Today, the plumbing market can be found a lot of similar products, but none of them can compete with functionality, reliability and specifications. It is possible that the price of plumbing of other firms with much worse indicators may not be competitive.

In any case, domestic buyers have already managed to appreciate the fecal pump for the toilet from the producer of Grundfos.

Fecal pump for toilet Sololift 2 WC

The drainage pump from Grundfos is truly a unique plumbing design. If you decide to buy this product, before do it, it is extremely desirable to familiarize yourself with the whole model side (Sololift 2 WC 1, Sololift 2WC-3B SOLOLIFT2 CWC3) study specifications and features. These knowledge will help you choose optimal option For the price, moreover, the most suitable for certain operating conditions.

Pomp for toilet. It should be borne in mind that this device involves the installation (by the toilet) for 3 plumbing units maximum: a shower, washbasin and urinal (either BIDE). Pumps of this series are practically no different from Sololoft2 WC 1 (connection toilet + one more source).

The main purpose of all the plumbing devices listed above is the transportation of waste water from the sanitary node to sewage. GrundfossololIFT pumps have compact size and operate in fully automatic mode. Inside the pumps there is a knife shredder. All stations are able to effectively remove fecal strokes with different degrees of intensity (medium and small). One of the conditions of normal operation of the equipment of the GRANDFOS SOLOFT is the temperature of the fluid being passed - not more than 50s. Devices are not intended for pumping liquids with large mechanical fragments and chemically aggressive solutions.

Also very popular with consumers all over the world enjoys the installation of Grundfos Sololift 2 C3, which is intended for installation in the kitchen, posterior and other places where you can have a washing, washing machine and dishwasher. Due to the high shadac characteristics, namely the power and ability to pump water with a temperature of up to 90 degrees Celsius, it is indispensable when pumping the water used into the sewer.

Requirements for the operation of pumping installations

In order not to spend the money in vain (the price of the Poppos Poppos can not be called cheap), you need to decide on the most suitable for this specific situation model. And only then buy it. Also follow the following requirements for:

• installation of equipment must be completed correctly;
• periodically, it is necessary to clean all the internal elements of the pump;
• maximum adhere to the manufacturer's recommendations;
• do not allow the installation of chemically aggressive substances (acids, alkalis). From solid items in the toilet can be merged only toilet paper.

The installation of the pump-chopper can be carried out independently, but still it is better to call an experienced specialist.

Maximum performance	11.1 cubic meters m / hour
Power	640 W.
Voltage	220 B.
The presence of a cutting mechanism	not
Ability to connect	washing and dishwasher, bath, sink, shower, bidet
A type	Surface sewer installation
Maximum temperature of the pumped water	from 75 ° C, for 30 minutes at T 90 ° C
Diameter of pipes	32 mm, 40 mm Ø
Dimensions (DHGHV)	373,3х158,3х255.3 mm
Weight	6.6 kg
Guarantee	2 years

The universal compact sewer unit is designed to transport wastewater and connecting to a variety of plumbing devices. Among the entire series, the SOLOLIFT 2 C-3 model has the highest working capabilities, the unit can be connected to:

• sink
• shower Cabin,
• bath
• washbasin,
• washing
• dishwasher.

Please note that this model is not equipped with a cutting mechanism, the falling out of foreign objects in the wastewater can lead to breakage of the equipment. The device is intended exclusively for the lead of gray wastewater.

A simple principle of operation and high-quality components of a pledge of many years and efficient operation. The household pump is easy to maintain and does not require any additional upgrades, comes on sale completely ready for installation.

The pumping unit is capable of pumping fluid temperature from 75 to 90 s, depending on the duration of work, the maximum time of smooth operation is half an hour, it is quite enough to lead the wastewater.

Features of the design and principle of operation of the pump SOLOLIFT2 C-3

Danish company produces high-quality, reliable and functional pump equipment. Sololoft 2 line is of great popularity, has great amount positive feedback And fully meets modern requirements.

For the production of compact sewer installations, the manufacturer used the most suitable materials and reliable components. Innovative technologies And numerous studies allowed to release a series of unique units that allow you to save on the organization sewer system and qualitatively performing the diversion of wastewater.

1. For the manufacture of enclosures, the manufacturer uses super-duty composite materials.
2. "Dry" engine performance increased the service life of the product, and simplified maintenance.
3. The electric motor is placed in a specially reserved plastic compartment, so it always remains clean.
4. The check valve does not allow transfusion and reverse fluid flow.
5. Special coal filter effectively prevents penetration unpleasant odors room.
6. The Sololift 2 C 3 model has three additional nozzles.
7. Level relay, located in an affordable place.
8. Cable length is 1.2 m.

High technical characteristics and qualitative materials Provide many years of service.

The installation of the household pump is extremely simple, you can connect independently, guided by the manufacturer's instruction that comes in the kit. The manual describes in detail each stage of installation and launch of equipment.

The simple principle of operation is based on the automatic inclusion and disconnection of the installation, as soon as the reservoir is fully filled, the injection mechanism performs the removal of wastewater to the main sewage pipe. After the devastation of the reservoir, the unit is automatically turned off.

Where is the installation of Sololift 2 C-3 Grundfos?

A unique household pump will help you to realize all the most bold ideas associated with the permutation of the sanitary zone, creating extra bath For guests or moving the kitchen from one room to another.

The main task of such sewage stations Transportation of effluents in the main pipeline of the sewer system, the device will allow you to install a shower cabin on the attic or organize in basement Laundry room, install additional toilet and sink.

• The installation successfully carries out wastewater removal without feces from the nodes located below or higher, as well as far from the main sewer pipe.
• In the case when water is bad due to a small slope, the compact setting will also be able to help and will eliminate the problems once and for all.

The GRANDFOS SOLULIFT 2 C 3 model works with poorly contaminated wastewater, it is strictly forbidden to use equipment for pumping chemicals and aggressive substances.

Simple and operational frontal installation is performed using adapters and flexible eyeliner, all joints are processed by sealant.

Sololift 2 reliable sewer pumps will create conditions and comfort anywhere.

Photos of installed Sololoft

Specifications
Possible connections	Toilet, urinal, washbasin, sink	Toilet, urinal, washbasin, sink, shower, bidet	Wall toilet, urinal, washbasin, sink, shower, bidet	Shower, sink, bidet	Washbasin, dishwasher, washing machine, shower, bath, bidet, embedding in sink
Consumption	620 W.	620 W.	620 W.	280 W.	640 W.
Voltage	1x220-240 V-10% / + 6%, 50 HZ	1x220-240 V-10% / + 6%, 50 HZ	1x220-240 V-10% / + 6%, 50 HZ	1x220-240 V-10% / + 6%, 50 HZ	1x220-240 V-10% / + 6%, 50 HZ
Mass of kg	7.3	7.3	7.1	4.3	6.6
The temperature of the pumped liquid	Max. 50 ° C.	Max. 50 ° C.	Max. 50 ° C.	50 ° C.	75 ° С (no more than half an hour 90 ° С)
Rated current	3.0 A.	3.0 A.	3.0 A.	1.3 A.	3.1 A.
Consumption l / min	Max. 149.	Max. 149.	Max. 137.	Max. 119.	Max. 204.
Pod	8.5 M.	8.5 M.	8.5 M.	5.5 M.	8.5 M.
Power cable	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²
Working cycle	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min

Sololift2.this is a unique series of compact sewer pumping plants, facilitating drain drains from any household plumbing, regardless of the system of self-reading drainage.

Installations are collected and pumped up wastewater through a thin injection pipeline (\u003e 23mm) to the next overflow pipe - to a height of up to 6 m or a distance of 100 m.

An additional toilet and a full-fledged bathroom in the attic or basement will no longer be a dream, thanks to the use of Sololift2.

The series consists of 5 compact variants of pumping plants for the diversion of household wastewater. 3 Installations WC-1, WC-3 and CWC-3 are designed to pump wastewater from the toilet and other plumbing. 2 sets of C-3 and D-2 are designed to pump gray waste from several objects.

The number in the symbols of models means the possible number of additional intake nozzles. Sololift2 is designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and purity during service.

Installations are ready for use with a plug and operate in fully automatic mode when the water is supplied to the tank.

Application

The pump is applied in cases if there is a drain from plumbing equipment, but no or impossible to use the artistic drainage pipe. Installations with connecting to the bathroom are designed only for installation in private homes. Other installations can also be used for commercial purposes.

WC-1, WC-3 and CWC-3 are designed to pump wastewater from 1 toilet, 1 washbasin, 1 shower and 1 bidet.
CWC-3 is an additional flexible version designed to embed when installing in the front wall.

C-3 and D-2 are designed to remove (hot) wastewater from the bathroom, shower, washbasin and washing machine.

Compact dimensions allow them to embed them into the front wall and in the elements of the floor design.

Features and advantages

• Pumping solution simplifying installation;
• Availability of installation instructions;
• The highest reliability due to high performance characteristics cutting element and engine;
• Fast, simple and clean service maintenance - No need to remove the unit from the installation site;
• "Dry" engine performance and all relevant serviced parts makes repair work and maintenance is simple and clean;
• Easy access to level control relays, access for maintenance;
• Hermetic system with welded tank, no leakage in the case of reverse flow;
• No unpleasant odors due to the exhaust valve and coal filter;
• Does not require maintenance The design of the tank reduces the risk of precipitation and clogging;
• Installation has persistence hot water up to 90 ° C for 30 minutes;
• Super compact design;
• Low start levels allow you to establish modern flat shower pallets;
• The ability to select the direction of the outlet (up and to the side);
• Simple installation and replacement of intake connecting pipes with adjustable height;
• The ability to select up to 4 inlets and 6 pressure pipe connections;
• All settings are approved by LGA, VDE, EMC, GOST standards.