Sewer pumping unit Grundfos (Grundfos) SOLOLIFT2 C-3 Several years ago, the world leader in production pumping equipment Grundfos has released an updated version of the popular SOLOLIFT 2 С3 / This setting is a compact device (including all the necessary pipes and connections for successful installation), which has a high efficiency and is a hermetically sealed plastic unit of relatively small size, in which there is a pump with a "dry design" motor in which a check valve is built in the discharge pipe, as well as a level switch, a special ventilation built-in valve with charcoal filter improved quality, which allows you to effectively remove all sewerage in your kitchen, bathroom (excluding the toilet) and other similar rooms.

Pump type:	|Sewer installation |
Pump type:	Surface
Height:	34.1 cm
Width:	15.8 cm
Length:	49.3 cm
The weight:	6.6 kg
Working hours:	50% - 1 min. (30 sec on; 30 sec off)
Protection class:	IP 44
Mains voltage:	1 x 230 V
Maximum power consumption:	0.64kw
Water quality:	Dirty
Allowable temperature of the pumped-over liquid:	up to 75 ° C
Contents of delivery Grundfos (Grundfos) SOLOLIFT2 C-3:	Adapters with the same outer diameter and different meanings internal diameter corresponding to the size of the discharge line. Discharge branch pipe, adapter, pipeline are connected with a clamp. The eccentric inlet pipes allow the connection to be displaced by 10 mm, which facilitates the installation of the sewer system.
Maximum consumption:	204 l / min cbm / hour
Maximum head:	8.8 m
Insulation class:	F
Rated current:	3.1 A
On / off level (from the bottom of the tank):	65 (115) / 35 mm
Application:	Sink, shower, bidet, bath, Washer/ dishwasher / kitchen sink
Advantages:	Operational reliability, easy maintenance and Maintenance, easy installation and replacement
Manufacturer country:	Serbia
Service in 24 hours:	Yes
Guarantee:	24 months

Grundfos SOLOLIFT2 (Sololift 2) This is a unique series of compact sewage pumping units from the world leader in the production of pumping equipment that facilitate the discharge of wastewater from any household plumbing, regardless of the gravity drainage system. Price for sewage pumping units fully reflects their great functionality and high quality. The service life is calculated for more than 10 years (as well as for all equipment of the company Grundfos) ,warranty service life 24 months. Buy a pumping unit Sololift2 (sololift2) You can in our company, the entire range of products is always available for you, and highly qualified specialists are at your service to help you choose the equipment you need.

The units collect and pump waste water through a thin discharge pipeline (> 23mm) to the next overflow pipe - to a height of 6 m or to a distance of 100 m.

An additional toilet and a full bathroom in the attic or basement will no longer be just a dream, thanks to the use of SOLOLIFT2 WC 1 or WC 3, as well as Sololift 2 CWC 3.

Series consists of 5 compact options pumping units for diverting household Wastewater.

3 installations sololift , and designed for pumping waste water from a toilet, sink, bidet, shower, washing machine and other plumbing fixtures.

2 installations< Grundfos Sololift 2 C-3> and Grundfos Sololift 2 D-2designed to pump wastewater from multiple sources (washing machine or dishwasher and sink).

Number in conventions models indicates the possible number of additional inlets (e.g. model Sololift2 C-3 has 3 inlets). SOLOLIFT2 (sololift 2 ) is designed in accordance with the needs of professionals, and therefore provide high reliability, simplicity and cleanliness during service.

The units are ready to use with a plug and operate fully automatically when water is supplied to the pump drain tank.You can familiarize yourself with the operation of Grunfos Sololift2 pumping units in more detail

Application

The pump is used in cases where drainage from plumbing equipment is needed, but there is no or it is impossible to use gravity drain pipe... Units with connection to a bathroom are intended only for installation in private houses or apartments. Other installations can also be used for commercial purposes.

WC-1, and designed to pump waste water from 1 toilet, 1 washbasin, 1 shower or 1 bidet.
CWC-3 it is an additional flexible option designed for integration into the front wall.

C-3 and designed to remove (hot) waste water from bath, shower, washbasin, sink, washing machine and dishwasher.

Compact dimensions allow them to be integrated into the front wall kitchen set or bathroom, and in the structural elements of the floor.

Explanation of the model name.

Explanation of the designation of SOLOLIFT2 installations:

WC - the model has a connection to the toilet and is equipped with a cutting mechanism

C - model with compact design

D - model for shower and sink

1 - one additional connection (excluding the toilet connection)

2 - two additional connections

3 - three additional connections

Attention! Models C-3 and D-2 are not equipped with a cutting mechanism.

The compact sewage pumping unit is equipped with:

Unit design in accordance with EN12050-2 standard, with unique properties, quick installation, long term operation and easy cleaning.

Internal structure Sololift 2S3 units

Installation examples for the Grundfos Sololift 2 C3

dimensions pump GRUNDFOS SOLOLIFT 2 C-3

net weight 6.6 kg Tank capacity 5.7 l Flexible discharge connection ∅22 / 25/28/32/36/40 Dimensions of possible inlet 1 x ∅32 / 36/40, top connection 2 x ∅36 / 40/50, side Start and Stop Levels Start: 72mm above floor level. Stop: 52mm above floor level PH value of the pumped-over liquid from 4 to 10 Maximum fluid temperature 75 ° C continuously, 90 ° C for 30 minutes. Temperature environment from +5 ° C to +35 ° C Operating mode S3-50% - 1 min. (30 sec on; 30 sec off) Rated current 3.1 A Power factor (cos φ) 0.66 / 0.90 Rotational speed 2800 min-1 Protection class IP44 Insulation class F Connecting cable 1.2 m; 0.75 mm2 (H05VV-F-3G). Supply voltage 1x220-240 V, 5 Hz.

Installation replacement options Sololift + the previous generation on modern Sololift 2

Sometimes there are situations when a pump with a Grundfos Sololift grinder is simply necessary. The most common ones include:

1. Construction of a new bathroom in the basement. Its position turned out to be below the level at which the sewer network passes.
2. Renovation or redevelopment of the premises. At the same time, one cannot do without transferring or building a new bathroom, and due to the distant location of the entrance to the central sewerage system, the gravity option is impossible to implement.

In these two typical situations (although there may be many more), it is difficult to think of more suitable solution than a pumping unit with a grinder for the Sololift toilet bowl. Today on the plumbing market you can find many similar products, but none of them can compete with in functionality, reliability and technical characteristics. It is possible that the price of plumbing fixtures from other companies with much worse performance may not be competitive.

In any case, domestic buyers have already appreciated the fecal toilet pump from the manufacturer Grundfos.

Faecal pumps for the Sololift 2 WC toilet

The drainage pump from Grundfos is a truly unique plumbing design. If you decide to buy this product, then before you do this, it is highly advisable to familiarize yourself with the entire model range (Sololift 2 WC 1, Sololift 2WC-3b Sololift2 CWC3) to study specifications and features. This knowledge will help you choose the best option at a price, and the most suitable for certain operating conditions.

Toilet pump. It should be borne in mind that this device involves the installation (in addition to the toilet) for a maximum of 3 plumbing units: shower, washbasin and urinal (or bidet). Pumps of this series are practically no different from Sololift2 WC 1 (toilet connection + one more source).

The main purpose of all plumbing devices listed above is to transport waste water from the plumbing unit to the sewer. Grundfos Sololift pumps are compact and fully automatic. A chopping knife is located inside the pumps. All stations are capable of efficiently removing fecal wastewater with varying degrees of intensity (medium and low). One of the conditions for the normal operation of Grundfos Sololift equipment is the temperature of the passed liquid - no more than 50C. The devices are not intended for pumping liquids with large mechanical fragments and chemically aggressive solutions.

Also, the Grundfos Sololift 2 C3 installation is very popular with consumers all over the world, which is intended for installation in the kitchen, laundry room and other places where you can have a sink, washing machine and dishwasher. Due to its high shadow characteristics, namely power and the ability to pump water with temperatures up to 90 degrees Celsius, it is indispensable when pumping the used water into the sewer.

Requirements for the operation of pumping units

In order not to spend money in vain (the price of Grundfos pumps cannot be called cheap), you need to decide on the most suitable for this specific situation model. And only then buy it. You should also adhere to the following operating requirements:

• installation of equipment must be done correctly;
• periodically it is necessary to clean all internal elements of the pump;
• adhere to the manufacturer's recommendations for use as much as possible;
• do not allow the penetration of chemically aggressive substances (acids, alkalis) into the installation. For solid objects, only toilet paper can be emptied into the toilet.

You can install the grinder pump yourself, but it is still better to call an experienced specialist.

this small-sized, fully equipped and ready-to-install pumping unit is a hermetically sealed plastic tank in which there are - a pump with a “dry design” motor with a check valve in the discharge pipe, a level switch, vent valve with improved carbon filter (no additional filters required), electrical cable length 1.2 m with Shuko plug. The pump switches on automatically when the tank is full (switch-on level) and automatically switches off when it is empty (switch-off level).

Pumping vertically is 8.8 m, horizontally 90 m

The design allows you to pump wastewater with a temperature up to 75 ° C in continuous operation and up to 90 ° C within 30 minutes.

Sololift2 C-3- a small-sized, fully equipped and ready-to-install sewage pumping unit for pumping domestic wastewater (without faeces) from those rooms in private houses from which wastewater cannot be directed into the sewage system by gravity.

Sololift2 C-3 is commonly used for:

• shower cabins,
• washbasins,
• baths,
• washing machines (maximum 90 ° C)
• and dishwashers OK

in the floor basements below the sewer level, or in connection with the repair or modernization of existing buildings, when their location may be at a distance from the main sewer riser and it is not enough to establish a natural bias.

Sololift2 C-3 suitable for installation under a washbasin, or especially suitable for installation in limited space in structures near walls and built-in wardrobes. Low on / off levels are suitable even when used with a shower tray.

The compact sewage pumping unit is equipped with:

• Cable with plug
• Horizontal or vertical connection pressure connection with several adapters for pipes with a diameter of Ø22-40 mm
• Built-in non-return valve
• Electric motor, "dry" design, with high efficiency, including thermal protection, level switch and controller
• Eccentric inlets (adjustable in height) for pipes with a diameter of Ø36 or 40
• With manual clogging protection and separate drain connection for maintenance
• Outlet valve with overflow protection
• Lugs for fixing and mounting

Unit design in accordance with EN12050-2 standard, with unique properties, quick installation, long service life and easy cleaning.

Specifications Grundfos SOLOLIFT2 C-3:

Application: Sink, shower, bidet, bath,washing machine, dishwasher, kitchen sink

• Model number: 97775317
• Pump type: Sewage installation
• Maximum flow: 204 l / min
• Height: 34.1 cm
• Width: 15.8 cm
• Maximum head: 8.8 m
• Weight: 6.6 kg
• Length: 49.3 cm
• Pump type: Surface
• Country of origin: Serbia
• Service in 24 hours: yes
• Warranty: 24 months
• Protection class: IP 44
• Insulation class: F
• Mains voltage: 1 х 230 V
• Rated current: 3.1 A
• Maximum power consumption: 0.64 kW
• Working mode: 50% 1 min. (30 sec on; 30 sec off)
• Permissible temperature of the pumped liquid: up to 75 ° C
• On / off level (from the bottom of the tank): 65 (115) / 35 mm
• Water quality: Dirty

Contents of delivery: Adapters with the same outside diameter and different inside diameters to match the size of the discharge line. Discharge branch pipe, adapter, pipeline are connected with a clamp. The eccentric inlet pipes allow the connection to be displaced by 10 mm, which facilitates the installation of the sewerage system.

Advantages: Operational reliability, easy care and maintenance, easy installation and replacement

REPLACING SOLOLIFT + for SOLOLIFT2

We offer you to buy Grundfos SOLOLIFT2 C-3 by favorable price 24,050 RUB

Grundfos SOLOLIFT2 C-3 is of high quality and optimal price... The manufacturer is known all over the world and provides a guarantee for its products.

To buy Grundfos SOLOLIFT2 C-3 in our online store, you just need to place an order online on the website

Maximum productivity	11.1 cc m / hour
Power	640 Wt
Voltage	220 V
The presence of a cutting mechanism	No
Connectivity	washing machine and dishwasher, bath, sink, shower, bidet
Type of	Surface sewer installation
Maximum temperature of the pumped-over water	from 75 ° С, within 30 minutes at t 90 ° С
Pipe diameter	32 mm, 40 mm Ø
Dimensions (LxDxH)	373.3x158.3x255.3 mm
The weight	6.6 kg
Guarantee	2 years

A versatile compact sewage system designed for transporting waste water and connecting to a variety of sanitary fixtures. Among the entire series, the Sololift 2 C-3 model has the highest working capabilities, the unit can be connected to:

• sink,
• shower cabin,
• bath,
• washbasin,
• washing,
• dishwasher.

Please note that this model is not equipped with a cutting mechanism, the ingress of foreign objects into the wastewater may cause damage to the equipment. The device is designed exclusively for draining gray waste water.

A simple principle of operation and high-quality components are the guarantee of many years of efficient operation. The household pump is easy to maintain and does not require any additional upgrades; it goes on sale completely ready for installation.

The pumping unit is capable of pumping out liquid with a temperature of 75 to 90 C, depending on the duration of operation, the maximum time of uninterrupted operation is half an hour, this is quite enough to drain waste water.

Design features and operating principle of the SOLOLIFT2 C-3 pump

The Danish company produces high-quality, reliable and functional pumping equipment. The Sololift 2 line is very popular, has great amount positive feedback and fully meets modern requirements.

For the production of compact sewer installations the manufacturer used the most suitable materials and reliable components. Innovative technologies and numerous studies have allowed the release of a series of unique units that allow you to save on the organization sewer system and efficiently performing wastewater disposal.

1. For the manufacture of cases, the manufacturer uses heavy-duty composite materials.
2. The "dry" design of the engine increased the product life and simplified maintenance.
3. The motor is housed in a specially designated plastic compartment so it stays clean at all times.
4. The non-return valve prevents overflow and reverse flow of liquid.
5. Special charcoal filter effectively prevents penetration unpleasant odors into the room.
6. The sololift 2 c 3 has three additional connections.
7. Level switch, located in an accessible place.
8. The cable length is 1.2 m.

High technical characteristics and quality materials provide a long service life.

Installation of a household pump is very simple, you can make the connection yourself, following the manufacturer's instructions included in the kit. The manual describes in detail each stage of installation and start-up of the equipment.

The simple principle of operation is based on the automatic switching on and off of the unit, as soon as the tank is completely filled, the discharge mechanism carries out the wastewater discharge to the main sewerage pipeline. After the tank has been emptied, the unit automatically shuts down.

Where is the Sololift 2 C-3 GRUNDFOS used?

A unique household pump will help you to embody all the most daring ideas associated with rearranging the plumbing area, creating additional bath for guests or moving the kitchen from one room to another.

The main task of such sewage stations is the transportation of wastewater to the main pipeline of the sewer system, the device will allow you to install a shower cabin in the attic or organize a laundry room in the basement, install additional toilet and a sink.

• The unit successfully carries out waste water removal without faeces from nodes located below or above, as well as far from the main sewer pipe.
• In the case when the water does not go well due to a slight slope, a compact installation can also help and will eliminate the problems once and for all.

The grundfos sololift 2 s 3 model works with slightly polluted waste water; it is strictly forbidden to use equipment for pumping chemicals and aggressive substances.

Simple and quick front mounting is carried out using adapters and flexible hoses, all joints are treated with a sealant.

Reliable sewage pumps Sololift 2 will create conditions and comfort anywhere.

Photos of installed Sololift

Specifications
Possible connections	Toilet, urinal, washbasin, sink	Toilet, urinal, washbasin, sink, shower, bidet	Wall mounted toilet, urinal, washbasin, sink, shower, bidet	Shower, sink, bidet	Washbasin, dishwasher, washing machine, shower, bathtub, bidet, sink
Consumption	620 W	620 W	620 W	280 W	640 W
Voltage	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz	1x220-240 V-10% / + 6%, 50 Hz
Weight kg	7.3	7.3	7.1	4.3	6.6
Pumped liquid temperature	Max. 50 ° C	Max. 50 ° C	Max. 50 ° C	50 ° C	75 ° С (no more than half an hour 90 ° С)
Rated current	3.0 A	3.0 A	3.0 A	1.3 A	3.1 A
Flow l / min	Max. 149	Max. 149	Max. 137	Max. 119	Max. 204
Pressure	8.5 m	8.5 m	8.5 m	5.5 m	8.5 m
Power cable	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²	1.2 m, 0.75 mm²
Work cycle	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min	S-3-50% -1 min

Price, rub.

Article: 97775317

is a compact, ready-to-install, automatic sewage pumping unit. Used in all types of buildings for pumping faeces-free gray wastewater.
The unit is designed in accordance with EN 12050-2.

Areas of use

Sololift2 C-3 is suitable for pumping gray waste water from washing machines, dishwashers, bathtubs, showers, washbasins or kitchen sink... The unit is designed for front wall mounting. The professional design allows you to pump wastewater with temperatures up to 75 ° C, with continuous operation for 30 minutes up to 90 ° C.

Typically, these settings are used in the following cases:

• In the basement below the sewerage level.
• In connection with the reconstruction or modernization of buildings in which gravity drainage is impossible due to the fact that sewage pipe located at a great distance, for example, from the attic.

Features and Benefits

Durability and operational reliability

• The powerful electric motor guarantees optimum operational reliability when pumping gray wastewater at temperatures up to 90 ° C.

Easy installation and replacement

• Height-adjustable inlet and outlet connections ensure ease of installation and replacement.

• Two selectable switching levels to suit any application. In addition, due to its narrow design, the unit can be installed in tight spaces.

Simple care and maintenance

• The removable, compact pump-motor unit allows any maintenance procedure to be carried out quickly and cleanly.

• There is no need to disconnect the pressure and supply lines or dismantle the unit for maintenance.

Equipment design and equipment

Sololift2 C-3 is supplied with a reservoir made of composite material sewage-resistant, with an inspection cover.

Specifications:

• Adapter (branch pipe) for supply pipelines Ø32 and Ø40.
• Two additional lateral inlets. One connecting piece with clamps included.
• Two lateral inlets with integrated check valves, protecting against liquid backflow.
• Hose nozzle adapter for connecting a washing machine or dishwasher.
• Vent valve with charcoal filter, overflow protection and built-in adapter for Ø20 air vent.
• Automatic pipe coupling for connecting the pumping unit.
• The combined pump and motor are fixed in the tank with three captive screws. The discharge pipe of the pump connected to internal pipeline tank, is fixed by an automatic pipe coupling inside the tank.
• 1.2 m cable and plug.
• Flexible connecting hose for suction pipes Ø32 and Ø40.
• Supports for floor mounting including screws and dowels.
• Check valve.
• Adapters for discharge line from Ø22 to Ø40.
• Drain hose with clamps and tap.

Technical details

Net weight	6.6 kg
Tank capacity	5.7 l
Flexible discharge connection	Ø22 / 25/28/32/36/40
Possible entrance dimensions	1 x Ø32 / 36/40, top connection 2 x Ø36 / 40/50 on the side
Start and stop levels	Start level 1: 65 mm above floor level Start level 2: 115 mm above floor level Stop level: 35mm above floor level
PH value of the pumped liquid	from 4 to 10
Maximum liquid temperature	75 ° C continuous 90 ° C for 30 minutes
Maximum head	8.5 m
Maximum flow	204 l / m
Ambient temperature	from +5 ° C to +35 ° C
Working hours	S3-50% - 1 min. (30 sec on; 30 sec off)
Supply voltage	1 x 220-240 V - 10% / + 6%, 50 Hz
Power consumption, P1	Max. 640 Wt
Rated current	3.1 A
Power factor (cos)	0,66/0,90
Rotation frequency	2800 min-1
Protection class	IP44
Insulation class	F
Connection cable	1.2 m, 0.75 mm2 (H05VV-F-3G)

dimensions

Sololift2 units are CE marked and have the following certificates:

Company Grundfos is the world's leading manufacturer pumping units... This equipment includes both pumps and electric motors and their various components. Currently the brand Grundfos is represented in 45 countries of the world, and in 13 of them there is an active production of pumps and other related equipment.

The units, which are manufactured at the enterprises of Grundfos, are distinguished by high performance, as well as low energy consumption. Using the models of this company allows you to reduce energy costs up to 40-6о%, which indicates a quick payback of new pumping systems this manufacturer. In addition, a high degree of reliability of the entire line of pumping equipment from this manufacturer can be noted.

Circulating pumps, as a rule, are most often used in systems for circulating liquids for domestic needs. Typically such systems are heating systems. In them, the circulation of the working medium is ensured by the operation of the pump. The warranty period for various models of such units is 5 years.

Sewerage installations SOLOLIFT and SOLOLIFT2 are intended for pumping out various sewage drains (from a sink, shower, cubicle, toilet). Selected models are equipped with a cutting mechanism that allows it to enter drains toilet paper... The warranty period for such sewerage installations is 24 months.

Pumps of types KR and AR are widely used for pumping both sewage and water from various pits or drainage wells. These models are made of stainless steel, which provides them, based on operating conditions, a relatively long service life. The warranty for this type of unit is 24 months.

Gundfos SPO pumps are submersible pumps. They are often used in water supply systems of cottages or country houses... There is a possibility of their delivery from float switch... The working (hydraulic) parts of the pumps are manufactured and of stainless steel... Warranty for given type applies for a period of up to 2 years.

The main task pumping stations Jp is water supply summer cottages or private houses, as well as an increase in water pressure in existing systems... The capacity of some installations, depending on the model, is even sufficient for watering vegetable gardens and orchards. Manufacturer's warranty for given view equipment is 24 months.

Booster pumps of the UPA series are designed to increase the water pressure in previously installed cold water and hot water systems. For the operation of such units, a flow switch is provided in the machine. These pumps are highly wear-resistant, as their parts are made of either stainless steel or ceramics. The guaranteed service life of the booster units is 2 years.

Multistage centrifugal pumps CM is commonly used in irrigation systems or when filling swimming pools or other containers. In addition, these types can be used in cold and hot water supply systems. apartment buildings, as well as in various industrial systems... Their long service life is ensured by the fact that all parts in contact with water are made of stainless steel. The warranty period for such equipment is 24 months.

Monoblock pumps of the NB series are designed to circulate working fluids in different systems air conditioning and ventilation, as well as heating and fire extinguishing systems. In addition, they are often used to increase pressure in water supply systems. The features of such pumps include the ability to work with different types liquids with changing temperatures and pressures in a wide range. These pumps are guaranteed for up to 24 months.