We continue the topic of painting the ceiling. We have analyzed the ceiling and made a plan, how to do it. Initially, it is worth the task, how to clean the ceiling from the blotch, old paint., putty?

How to Clean the ceiling from old paint or chalk

To stripping the ceiling we will need an ordinary scraper. Work is not fast. You can start absolutely from any part of the ceiling:

The ceiling can easily succumb, and can be very stubborn. It mainly depends on who and how he used to do. Often the painters wet the ceiling with a wet rag, as it contributes to a faster cleaning. However, I witnessed and the opposite situation, when wetting contributed only to the breeding of dirt, and did not provide real assistance. As a result, the wet rag had to refuse. In general, it is necessary to experiment here. The goal, as they say alone - clear everything to concrete, and there are different ways to be different.

In the worst version, for the ceiling in 20 square meters It may turn out that over the whole day you do not clean it. Or clean, but very tired, since it has to work all the time with hands stretched up. If you have not been charged or exercise for a long time, it is recommended even more often to rest, otherwise the next day you will have a very sick muscle, and you still work and work.

Gradually, you will see the results of your work:

and it will inspire you:

If, as a result of the removal of old chalk, paint or lime from the ceiling, you understand that it can fly out a rather large piece, then in any case, chop it. This place you have to plaster. Any badly holding, crepting slices of the ceiling you should consider or repel.

That's it. As you can see, there is nothing complicated in how to clean the ceiling, and you were convinced of it.

The task is to quickly wash off whitening from the ceiling, damaged by the leaked water from the neighbors from above, or simply lost its qualities over time it costs quite often, especially with cosmetic premises. Fully remove the palate layer is necessary and when the mold appears in order to treat the surface of the ceiling by an antifungicidal agent.

Even if the suspension or stretch ceiling device is supposed to be better cleaned by the blame so that the dirt, the whitles of the blots did not fall on the thin fabric of the suspended ceiling, or did not contaminate from the inside the slab of the suspended ceiling or plasterboard.

Ways to remove whitewings from the ceiling

Unfortunately, often every new layer of blissing was applied to the previous one, as a result of which an uneven rather thick chalk or lime layer is formed on the ceiling. Regardless of the chosen method of clearing the surface of the ceiling, it is possible to make the place to free the room from furniture as possible. polyethylene film.

Traditional ways to remove whitewash

Wash off whitening from the ceiling can traditional wayif it is based on the chalk or limestroke.

To do this, you can use the usual sponge moistened in warm water. It is necessary to change the water as often as possible, otherwise the chalk dissolved in it will be applied to the sponge. Washing should be continued until the water after pressing the sponge does not cease to be muddy.

Strongly salted hot water rather softening the pavement layer, so before the start of the process you need to add to very hot water, otherwise the salt is poorly dissolved, 1 kg of a conventional table salt at the rate of 8-10 liters of water. The most efficient temperature of the water-salt solution for washing off whitening-40 ° C.

Clear the ceiling from blissing on a lime-based basis is much harder. For this, the sponge will need a spatula. If you take the layers to raid dry, it is formed indoors a large number of harmful dustTherefore, the ceiling clearance process from lime blots should be organized as follows:

• Protect the surface of the floor by plastic film, old wallpaper or at least newspapers;
• To richly moisten with a small warm water, not more than 1 × 1.5 m fragment of the ceiling. To do this, use, roller, pulverizer, or a wide rigid brush;
• Wait until the lime layer wet enough. This will be evidenced by the darkening of the plating layer;
• Lost the hardness layer whitewash to shoot with a spatula;
• The residue brought to wash off with a sponge.

Before performing work, you should protect your hair and eyes, it is advisable to use safety glasses. Minor fragments and dust limes are able to seriously injure their eyes.

Professional masters in order to quickly remove the blots, use a solution hot water with soda soda and economic soap. The disadvantage of this method is that its traces will also need to flush from the ceiling surface. Residues calcinated Soda can interact with many paints on adhesive basis, and soap traces because of the fat contained in it will not allow the layer evenly.

BUT B. complex cases You can use this recipe.

The composition for flushing lime blots:

• 12 liters of water;
• 2 tablespoons economic Soap, grated;
• 5 tablespoons of technical calcined soda.

The ceiling, painted with water-level paint, is also repuded with a spatula and a cylma with an abrasive surface, or a conventional wooden grout. Remove old bliss On the basis of water-level paint, it is possible to add a pharmacy vapor of iodine to hot water (10 liters).

Unconventional ways to remove whitewash

In order to avoid a large amount of dust and ensure the removal of layers of whitewash, the layers should be combined into a single whole.

The easiest way to get rid of the old whitewash is to wash the ceiling by a conventional liquid ceiling. It is easy to cook at home, the bay of flour hot water From the proportion of 200 g of flour per 1 liter of water.

For the Clays, it is better to use the flour of the 2nd grade, there is more gluten in it. So that in the composition there was no lumps should initially mix the glass of water with a glass of flour, and then pour the remaining 800 ml of water with a thin jet, constantly stirring. The composition is to boil, and use after it cools up to room temperature.

After applying the Clays on the ceiling, the glasses are filmed with large formations, practically without dirt and dust.

If there is old newspapers or trimming wallpaper on the blaster layer, then the whims in the panels are impregnated on the panels when they are broken from the ceiling. So you can remove the whores from the ceiling without flushing it, or climbing and cleaning small residues raided.

Watering in water acetic acid, from the proportion of 100 ml of 9 percent cable vinegar per 10 liters of water, you can destroy the chalk contained in the whitel. This method is good for the corners of the ceiling or for a multi-layer old whitewash.

Prepared to remove bliss

The construction industry offers many funds with which you can wash the ceiling from the blots, they can be easily found in each construction supermarket. Well showed itself a series of Cleaning funds in a comfortable plastic packaging. But with a limited budget it is better to use domestic funds, the quality of this will not suffer.

Tools necessary for removing Pooring:

• Spatula, two species, wide and narrow;
• Brush with a rigid porrons, for sweeping the initial layer mixed with dust;
• Kelma with abrasive or wooden grout;
• Spray;
• Wide rigid brush or roller;
• Special plastic tray or just a box for collecting exhaust fragments of blissing (for convenience, attached to the handle of the spatula);

You should not neglect the means of personal protection, you will need:

• Protective glasses;
• Pharmacy gauze bandage to protect the respiratory tract.

October 1, 2016
Specialization: finishing facades, interior decoration, construction of cottages, garages. Experience and gardener and gardener experience. There is also experience in repairing cars and motorcycles. Hobbies: the game is not a guitar and a lot more, to which there is not enough time :)

The process of removing whitewings from the ceiling is generally quite simple. However, due to the fact that the field of activity is located above the head, and even on a decent height, the homemade masters often face some difficulties. Therefore, in this article I decided to tell you how to wash the old whitening from the ceiling quickly and without much effort.

When you need to wash off the whitewash

Before proceeding to the description of the process of removing the old coating, I will say a few words about how this operation is required. The fact is that many finish options can be performed without removing a chalk or lime layer..

So delete this coat It is necessary in the following cases:

• if the mold appeared on the surface;
• before painting waterfront paint;
• before facing polystyrene foam plates that are glued.

When installing suspended and stretch structures Old, of course, you can not touch. In addition, the ceiling was allowed on the old whitel.

The only thing before to whitewash the ceiling on the old whitewash, it is necessary to remove pollution. For this, the surface should be wiped with a wet sponge or cloth. Moreover, keep in mind that the composition should be the same type, i.e. Apply a lime blotch on top of chalk it is impossible.

To determine which packer is covered with a ceiling very simple, for this you need to sprinkle the surface with water. If the drops are absorbed, it means that he is chalk, if the drops are saved on the surface - the whitewashes are lime.

Surface preparation

Regardless of exactly how it is to wash the chalk, before proceeding with this procedure, it is necessary to prepare:

1. since the blur is dirty work, furniture and other items must be taken out of the room.;
2. if any items you cannot bear it, they must be covered with a film;
3. be sure to prepare workwear - a headdress, safety glasses, etc. If cleaning will be carried out by a dry way, then you will additionally need a respirator or at least a gauze bandage to protect the respiratory organs;
4. you should also prepare a stepladder or a high table from which you can get to the ceiling, in addition you will need some set of tools that I will tell you below.

After preparation, you can proceed directly to work.

Options for removing bliss

Options How to clean the ceiling from whitewash there is quite a lot. The most efficient and common are the following of them:

Method 1: Water

First of all, I will tell you how to quickly remove the whitewash with the ceiling with water, since this method is perhaps the most simple and most common. To work, you will need the following tool set:

• sprayer or greasy roller, preferably S saw by a special pallet;
• rag from x / b fabric;
• putty knife.

The instructions for performing this work looks like this:

1. before removing an old coating, it must be moistened. To do this spray water or moisten the ceiling painting roller. Water should be applied moderately so that it does not drip off the ceiling;
2. after 10 minutes, moisten the ceiling again;
3. now with a moisturized ceiling, you need to remove the blotch with a spatula. The coating should fall off with layers. If the whirlpool flows over to the solder, you should wait a bit until the surface gets;

1. after removing the chalk, the trowel needed to wash the ceiling with a rag x / b or a sponge dipped in warm water;
2. after the ceiling is dry, spend your finger on it. If the chalk remained on the finger, wash the ceiling again.

The cracks that appear on the ceiling during the erosion process should be expanded with a spatula. So you immediately prepare the ceiling to repair.

The disadvantage of this method is a large amount of dirt. Therefore, before blurring the ceiling, be sure to cover the floor with the film.

It must be said that in some cases, if the coating is applied to the ceiling with a thin layer, it can be immediately flush by a wet cloth without taking as a spatula. True, in this case the process will be even more dirty.

Method 2: newspapers with hub

Now I will tell you how to remove whitewear without mud. To do this, you will need old newspapers and hubs or even cheap wallpaper glue.

The process of removing the old coating this way looks like this:

1. before removing the blots, you need to prepare a hubble. To do this, divert the flour in a small amount of water, then put a saucepan with clean water on fire. When water boils, gradually pour the flour solution into it and mix.
   After receiving the consistency of the test, the pan must be removed from the fire and then cool the resulting composition;
2. after that, take old newspapers, treat them with a honesty and glue to the ceiling. The corners of the newspapers at the same time leave unprocessed so that they can be easily dying;
3. now wait until the hubber is dry, and make the newspapers with a sharp movement, pulling them for corners;
4. after that, you can wash off the remnants of glue and whitening the usual mop with a rag.

According to the same scheme carried out this procedure With wallpaper glue. The most important thing is to wait until the hubble or glue will dry.

Method 3: Special washes

Currently in building stores can be purchased special tool To remove whitewash. Cleaning with its help the ceiling is quite simple:

1. first of all, the composition must be sprayed into the ceiling;
2. further, before removing the whitewash, it is necessary to wait until it is transformed into a crust, which is easily lagging behind the base;
3. now you need to consider the surface with any suitable tool, for example, a spatula. It must be said that the dust in the process of such cleaning is not formed, but the dirt is still not avoiding.

Method 4: homemade washes

If you did not find on sale a means to remove whitewash - do not be discouraged. Next, consider how to quickly clean the ceiling with a homemade wash.

To do this, you need to perform the following actions:

1. type five liters of water into clean capacity;
2. add a tablespoon of vinegar to the water and several caps of any foam for the bath;
3. the resulting composition to process the ceiling section of no more than three to four square meters;
4. before cleaning the ceiling, wait until the coating is taking. Usually it takes about five minutes;
5. after that, the surface must be cleared with a spatula;
6. at the end of work, the ceiling should be washed with warm water. As in the previous cases, before laundering the surface, cover the floor with a film.

It must be said that choosing how to wash off whitewash, you can also give preference to the cook salt. The latter should be dissolved in warm water in the ratio of 1:10.

The price of homemade washes is obtained significantly lower than the cost of purchased compositions, and the effectiveness is not inferior to them.

Method 5: a container scraper

How to wash off whitening with water and various means we figured out. Now I will talk in finally how to remove the coating with a dry way. To do this, you will need a special device - a scraper with a suspended container.

You can make such a device alone from a small spatula and plastic bath. In the soldier should be drilled small holesSo that you can hang the bath on it with wire.

As a result, you can consider the spatula to whitewash, and it will come immediately into the container. The disadvantage of this method is a large amount of dust that is formed during the cleaning process. Therefore, as already mentioned above, before proceeding with work, the respiratory tract should be protected.

Output

Each of the above ways to remove whitewash is quite effective, but at the same time contains its drawbacks. Therefore, you should choose individually, depending on the conditions and availability of certain means you have "at hand".

For more information, you can emphasize from the video in this article. If in the process of cleaning the ceiling you encountered any difficulties, ask questions in the comments, and I will gladly help you.

October 1, 2016.

If you want to express your gratitude, add clarification or objection to ask the author - add a comment or tell me thanks!

Repairs always begins with the removal of old decoration elements - plaster, wallpaper and blots. In most cases, limesky or chalk packers does not interfere with the use of modern building materials. But there are situations where it is not without removing it. How and how to quickly wash off whitewash without mud by attaching to this process a minimum of effort?

Before starting to wash off whiten from the ceiling, prepare all the tools and materials that will be useful during the process. First of all, find the staircase or the stepladder to get to the surface to be cleaned without any problems. To wash the blots you will need: spatulas with a wide and narrow blade, a bucket with water and a cloth or a sponge.

It is important to take care of your health. To do this, make gloves, gauze bandage that will protect airways From chalk or lime, as well as plastic glasses to prevent dust from entering eyes. During repair work Use old tight clothing.

To protect other surfaces in the house from pollution with chalk or lime, prepare old newspapers or wallpapers, polyethylene packages and oil packs.

Preparatory work

Washing plays from the ceiling is a time-consuming and very dirty process. Proper preparation Allows you to avoid long-term cleaning at the end of this stage of repair. In addition, chalk or lime are not laundered from some surfaces, so if you do not take care of the safety of things in advance, they will simply have to be thrown.

Remove all furniture, decor elements and textile facilities from the room. Those things that cannot be taken out, cover with a polyethylene film. With polyethylene, close the window openings to protect the glasses from dirt and dust.

If you do not plan to cross the wallpaper, you will have to take care of their safety. To do this, creemet them with polyethylene or newspapers.

Close the door of the door, and put a wet rag under it, which will delay the dust and prevent its spread over other rooms. Shipping floor with glue or newspapers in several layers.

Ways to remove bliss

At the end preparatory work You can begin to wash the blots. This can be done in several ways, each of which has its advantages and disadvantages.

Dry method. Relieve to the stepladder and with the help of a spatula squabble chalk or lime from the surface. When upper layer It will be cleaned, moisten a rag or a sponge in water and thoroughly wash the ceiling to remove finishing residues. Instead of wet washing, you can use the vacuum cleaner, but remember, the whims can spoil it, and it will not act as effectively with the task. The main advantage of this method is: there is no need to use a large number of tools or additional Materials. The lack of a dry cleaning method: it is suitable only for an old dry whitewash, which itself is almost falling off. Another minus is a large amount of dust that settles on all surfaces, and can also get into the eyes and nose.

Another option to remove whitewashing from the ceiling with alert - glue old newspapers on the surface

Wet method. Before starting cleaning, we wet the ceiling with a wet sponge, cloth or sponge. Can be used clean water Or a soap solution prepared on the basis of grated economic soap (5 tbsp. l.) and water (10 l). Moisten a small piece of ceiling at times so that the far corner is not drying until you get to it. After wetted the ceiling, wait 10 minutes and remove the swollen spatula. To speed up the process, keep the next one before cleaning the first site. The main advantage is wet cleaning: it allows you to clean the ceiling almost without dirt indoors. An insignificant drawback of this method: constant descents and lifts on the stairs to wet the sponge. So that you do not have to move down-up. Put a bucket with water to the stepladder or ask the assistant to clean and feed the rag.

Washing off whitening when rods and glue. This method requires more temporary and physical costs, as well as the presence of additional materials. To clean the ceiling from the blots, prepare the wallpaper glue. As an alternative, you can use a homemade hobster, which is prepared on the basis of hot water, starch and flour. Grease the ceiling with the resulting means and wait for complete drying. The active components of the braid or glue will contact the pairs of bliss, and it will easily be deleted.

Another option to remove whitewash from the ceiling with the help of alee - glue old newspapers to the surface. After drying, they are easily removed along with chalk. The main advantage of this method: cleaning the ceiling is absolutely without dirt.

To facilitate the process of washing off whitening from the ceiling, take advantage useful advice experienced masters:

• The selection of the cleaning method depends on the condition of the ceiling and the limit of bliss. In some cases, you can combine two methods, for example, where part of the ceiling peelled - dry cleaning is suitable, use the wet on the rest of the area.
• If the pools got to the surface (wallpaper, windows or floor) - it is better to wash it away at once. To avoid the appearance of chalk divorces as often as possible, change the water in the bucket.
• Fake K. working hand A small box with a spatula - so the amount of dirt on the floor will decrease several times.
• If after removing the blots on the ceiling remained or appeared dark spots - Process them white.

Taking advantage of the councils given, you can remove whims from the ceiling without mud. Determine the cleaning method by estimating the ceiling condition, prepare everything necessary materials and tools, as well as do not forget about the preparatory work. For proper fulfillment All actions on the ceiling will not remain chalk. If small particles failed to remove the surface with a special tool.

Problem How to wash the floor from the blotch usually occurs if you forget to protect the floor And other surfaces before repair.

How to quickly wash off whitening from the ceiling: simple ways without mud and dust

Sometimes you can hear that it is easier to repaint the floor than to wash it after whitewashing, especially if the floor is uneven and whitewashes fell into cracks.

Therefore, it is always necessary before you blossom or how to wash off whitening from the ceiling carefully cover the floor: it is better than a plastic film, and if there is no film, then several layers of old newspapers.

But if this advice has already been late, you will have to clean up.

Initially, remove everything that will work out from the floor with a dry brush or dry broom. Dust will be much, so it is desirable to use the respirator, but then it will be easier to wash off the floor. Then proceed to washing the floor. There are several simple rules and tricks that will help wash off the floor whitewash completely.

Building tricks how to wash off the floor whitewash after repair

1. In the water for washing the floor after blissing add any vegetable oil, approximately 100 g on the water bucket.

   Rinse the floor thoroughly, pour water. Next bucket Add 1 tablespoon of a concentrated dishwashing agent or vinegar. You can use for these purposes and chlorine-containers, such as "whiteness". Rinse the floor and other surfaces thoroughly.

   And rinse the floor with clean water for the third time.

2. In the water for washing the floor add concentrated dishwashing tools (Fairi, Mr. Proper) or Lock from Amway. After each floor washing, change water and add these means. Wash will be 3-4 times.
3. Add to water for washing the floor After whitewash, several potassium permanganate crystals (ordinary manganese or also called potassium mangartan).

   Make a solution pink colour And wash the floors and other painted surfaces. Potassium permanganate solution enters the reaction with lime and the floors are easily mixed. Wash with a weak solution of manganese can any painted surfaces, ceramic tiles.

   Lacquered surfaces (doors, plinths, window Rama), Parquet was undesirable, as divorces may appear.

4. If there is nothing of the above at hand, then table vinegar will help to wash the whitewash. Add vinegar to the floor for washing the floor. Water change and add vinegar at least three times. Last time Wash the floors with clean water.

Basic rules How to wash the ceiling from the blots:

• Constantly change the water, preferably after each docking rags.
• Each time you wash the rag, if you can't wash, change.
• For washing, you can use a sponge, it is easier to wash.

Before proceeding with the laundering of the floor after the plain, open all the windows so that the room is well ventilated.

How to remove angry with ceiling

Removal white color From the ceiling - an inevitable process, which should pass anyone who wants to get fresh and beautiful cover above their heads, and wants to see him in good condition for more than a year.

The need for this step is explained by the fact that white foam is the final layer, which is not very much related to it, especially if it is another end.

For example, if the upper part of the ceiling was and you want to cover its water paint - you need to get rid of white dust on the ground.

The only example is when you can not do anything with the old ceiling coating - If you plan to install dropped ceilings any type - voltage, MDF or plastic panels, Plasterboard and others.

Although the ceiling is so smoked or covered with a mushroom, which is not entirely able to leave it in this state, even if it is covered by the suspension structure.

Almost every task of repair and construction has several solutions and the question: "How to quickly remove the thrill from the ceiling?" There is also no answer. When planning repair work, no time and money is required, so we will consider the best methods.

In addition to the speed of removal of the old coating, do not forget about the safety of what is not going to change or repair, in otherwise You will need to spend time and damage the repair tools. These doors, windows, walls and floors, as well as furniture. All this should be carefully closed with a construction film, Paul - Cardboard.

It is also important to take care of yourself - protective glasses, respirators and gloves must be number one, without which it is better not to start working.

Your health is worth it, believe me.

How to quickly wash the blanket from the ceiling without mud? - Text and video tutorials

If we talk about the ceiling, then about height. Accordingly, stable goats or goats should also be available.

The speed of work depends largely on availability proper tool And the right choice of how it will be implemented!

To do this, you must specify:

• Type white - chalk or lime
• Layer thickness

Chalk on the finger leaves the trace and can be easily washed with water.

Lime is more resistant to water and leaves no traces. The layer thickness is easily determined by a wet sponge: it is necessary to pull the ceiling and get to the base.

The thin layer of chalk is easy to wash, and it requires a minimum. In this case, the washing of scratches from the ceiling can be performed by a conventional rubber scraper for washing points.

Scarf for points

The surface of the ceiling is carefully moistened with a sprayer (it is better to take a spray for the garden, if not, then an old bottle under the wiper).

Wait a few minutes, and then operate the ceiling with the help of foaminsine and scraper.

For better visibility of this process, browse the video:

When you hit the whitening several times, the rubber knives were no longer customized, you need to use a structure with a thickness of 10-12 cm in the stream.

Construction spatula

Before this, the ceiling must be moistened, but not as much as in the case of wipers. Here is the problem of moisture, so that the entire layer of the layer applies in depth, becomes soft and fragile.

For faster removal of the coating, it should be understood not with the overall width of the cutting edge of the blade, but about 2/3 or a little more.

This can be done when white is small across the entire width of the blade.

You can use a scraper with a telescopic handle instead of the blade. It will also allow the wizard not to leave the area of \u200b\u200bgarbage.

Construction scraper with telescopic handle

It is advisable to have a plastic pallet with a hand to remove the removable coating - fewer difficulties in further cleaning.

To ensure better moisturizing and separation of white from the overlapping plate, it is necessary that the moisturizing fluid penetrates better in the finishing layer.

For this, water is heated to a temperature of 40 degrees and a small amount of soap (2 tablespoons per 10 liters) and sodium ashes are added to it) and sodium ashes (5 tablespoons per 10 liters).

Another recipe is a few spoons of a dish or bath foam, as well as 2-4 tablespoons of vinegar. The acidic medium reacts by whitening whiteness, making the "cropped" layer and becomes a simple task to remove it.

One tool that allows you to very quickly remove white from the ceiling, crushed.

This method takes at least time, but it will be the most dusty (except for expensive professional equipmentwhich includes connecting industrial vacuum cleaner to the mill).

Grinder machine

When it came to achieve a minimum amount of residues, you can use old newspapers and cheap wallpaper glue to quickly remove the curtain from the ceiling.

The paper is glued to the ceiling, and the glue impresses the whitening layer and has already been cut after washing a white washing. To make more appropriate shoot in the newspaper, one unclean. The remaining coatings should be covered with a spatula.

A good old method for removing the white powder is the use of pasta cooked from flour or starch.

The composition is applied to the ceiling, it's time to dry, then the bark (painted, soaked paste) is formed by a scraper (spatula). Many garbage, but there are no dust at all.

If there is no desire or opportunity (during repair it should not be electricity or gas stove) to prepare the paste, instead you can take a cheap paste. The remaining procedure remains the same.

After the final removal of the previous output, the upper part must be thoroughly ached and covered before using other materials.

Bright ceiling above your head!

Together with this material he also reads:

How to quickly wash ashes from the ceiling

Come to our life when you sit at home in your favorite chair, raise your eyes on the ceiling and ... You know that it's time to update this ceiling. Finishing options are excellent for any taste and handbags, but almost every one of ...

How to remove angry with ceiling

Ceiling cleaning a few years ago was a very common option for completion, but now it is almost fully implemented in new, best and more strong technologies (painting, wallpaper, decorative plaster And ...

1. Preparing to remove whitewash
2. Methods of getting rid of blots

Summer is the traditional time of repairs. It's time to update your home, make it beautiful and modern.

But modern accommodation has few people associate with a whitewash on the ceiling, so most people try to get rid of it. How to wash the old whitening from the ceiling? A newbie seems difficult and practically impossible, but it is not.

• spatula with a wide blade;
• spatula with a narrow blade;
• bucket with water;
• rags;
• stepladder or staircase;
• gloves;
• newspapers, oilcloths, etc.

• "Dry" removal of bliss,
• "Wet",
• With the help of glue or alee.

Dry

You can also try to remove the chalk using a conventional vacuum cleaner.

However, it is impossible to remove everything with it, and it is hardly to spoil it, so it's not worth doing this.

Wet

To remove the chalk "wet" way, the ceiling must be pre-wetted.

To do this, take a sponge or cloth (you can roller), carefully urine in a bucket with water and rub a small piece of ceiling. You can also carefully clean the surface of the sprayer. After 10-15 minutes, the whirlwind will swell, and it can be easily removed by the spatula. To increase the speed, it is possible before removing the spins on the first section to moisten the second water.

When the whitewashed from the first plot will be removed, it will swell on the second.

You can wet whining not ordinary water, but soapy solution. For its preparation take the third part of the piece of household soap (grated), bucket warm water (10 l) and 5 tablespoons of soda.

How to quickly wash off whitewashing from the ceiling without mud

Glue and Clayster

To remove whipping with glue or hubble, you will have to make additional efforts and incur some costs.

For the removal of chalk glue uses the usual wallpaper glue. It is possible to remove it and the hub, which is made of flour or starch and hot water. You need to lubricate the ceiling and wait for the surface to dry. Glue (Cleaster) will connect the spam particles, and it will easily come down.

1. Spots light and disappear.

To check the quality of work, you need to spend your finger along the dry surface of the ceiling.

If there is no chalk on it, the work is perfect. If you are, then this is not a reason to redo! It is necessary to buy special primer in the store and treat the surface, and then cover the water-level paint.

1. Instruments and protective equipment

2. Cleaning from oil paint

3. Removal of waterfront paint

Every repair begins with the removal of the dilapidated coating. In the case of the ceiling, this is usually old whitewashed or paint. With whitelle everything is simple - it is washed off. But the question of how to remove paint from the ceiling requires more detailed consideration.

Even if you plan to install suspended or stretch ceiling, It is advisable to remove the paint (read as well: "How to wash the stretch ceiling").

After all, after some time she can start raving with pieces along with plaster. And if you decide to paint the ceiling, the complete surface stripper is simply necessary.

How to wash off whitening from the ceiling: 3 simple ways

Tools and means of protection

Before cleaning the ceiling of paint, you need to cook the necessary tools and protective clothing.

For work you will need:

• polyethylene film for furniture;
• newspapers and scotch to close the floor and window sills;
• respirator and safety glasses;
• ladder.

This is what will be needed in any case.

Additional tools and materials depend on what type of coating must be deleted.

Oil paint cleaning

Oil paint does not dissolve in water, so it can be removed either by special compositioneither mechanical method.

In the first case, it is necessary to purchase the paint dissolving composition. It is usually attached to the manual with the instructions on how to clean the ceiling of paint.

The sequence of actions is quite simple:

• it is necessary to apply the composition on the entire surface of the ceiling with a brush or spatula;
• wait while the paint does not start flaking (how much to wait - indicated in the instructions);
• remove softening paint with a spatula.

The alternative way is to mechanically clean the ceiling.

This uses a special nozzle on the drill. Cleaning the ceiling from paint with this method creates a lot of dust. Therefore, the use of the respirator when performing this work is mandatory. It is also recommended to close the door to the room tightly so that the dust does not apply around the apartment.

How to remove paint, details on video:

Removal of waterfront paint

There are two ways to clean the ceiling from water-free paint. For the first will need newspapers and wallpaper glue. Newspapers should be smeared with glue and join them to the ceiling.

Then you need to wait for them completely dry. When trying to tear them, the newspapers will be filmed together with paint. The remaining paint fragments are cleaned with a brush or coarse sandpaper.

It will not be superfluous to tell about how to remove paint from the ceiling using another method. He is more time-consuming, but reliable.

You need to take a rigid metal brush and how to rush her ceiling.

It is important that the bristles completely scratched the paint, reaching the putty layer under it. Then the ceiling must be well mixed with water using a roller. After that, in the room you need to arrange a draft. As a result of the execution of all the above, the paint will begin to swear with bubbles and peel from the ceiling.

In this form, it is easily removed by a spatula (Read more: "How to remove water-emulsion paint From the ceiling: ways to delete ").

These are the most effective methods Cleaning the ceiling from old paint. And let it only be the first stage in the implementation of conceived repairs, its successful completion will allow to move on with new forces - to the incarnation of the dream of a beautiful and cozy house.

How to wash off whitening from the ceiling: 3 simple ways

1. Removing Tools
2. Preparing to remove whitewash
3. Methods of getting rid of blots
4. Useful tips for washing plays

Summer is the traditional time of repairs.

It's time to update your home, make it beautiful and modern. But modern accommodation has few people associate with a whitewash on the ceiling, so most people try to get rid of it. How to wash the old whitening from the ceiling? A newbie seems difficult and practically impossible, but it is not.

The main thing is to properly prepare and take into account all the nuances, and then everything will turn out.

Removing Tools

First you need to prepare all required tools. To remove chalk from the surface, you should cook:

• spatula with a wide blade;
• spatula with a narrow blade;
• bucket with water;
• rags;
• stepladder or staircase;
• dense clothes and bandage on face;
• gloves;
• newspapers, oilcloths, etc.

  - To protect the walls, gender and furniture.

If there is a desire and opportunity, you can also prepare plastic glasses that protect your eyes from dust.

Preparing to remove whitewash

Since the removal of the chalk coating is a very dirty process, it is necessary to carefully prepare. The better the preparation was performed, the less effort will be spent on cleaning after repair and the fewer things will have to throw out:

1. If there is an opportunity, all furniture should be taken out of the room.

   If there is no such possibility, it is necessary to wrap it as much as possible with a polyethylene film.

2. You also need to close the window of the window. So they do not get dirty, and they will pass through themselves.
3. If possible, we protect the walls from the chalk. There is a need to do if the walls can then be washed. If the walls are floating with wallpaper, they will most likely have to change - how to close the walls are almost impossible.
4. Laster from the ceiling is better to remove and leave only a light bulb on the wire.

   If there is no such possibility, it must be carefully closed.

5. Before removing packed from the ceiling, you need to close the film and the door.
6. Not only films can be used to the floor, but also put newspapers, better in several layers.
7. Before the door should be put a wet cloth to wipe the legs before going out of the room.

   During operation, the door must be tightly close, and the wet cloth to cover the gap between the floor and the door - so there will be no dust to fly to other rooms.

So, all the necessary preparations are made. Now it's time to choose the appropriate way to wash off whitening from the ceiling.

Methods of getting rid of blots

Get rid of the hated cover of the ceiling can be three ways:

• "Dry" removal of bliss,
• "Wet",
• With the help of glue or alee.

Each of them has its advantages and disadvantages, but at the same time it is quite effective.

How to wash off whitening from the ceiling?

Dry

If a "dry" method was chosen, you just need to take a spatula, climb on the stepladder and mechanically move the chalk from the ceiling. After all the whits are removed, you should wet a rag or a sponge and how to wash the ceiling.

You can also try to remove the chalk using a conventional vacuum cleaner. However, it is impossible to remove everything with it, and it is hardly to spoil it, so it's not worth doing this.

The "dry" method has an advantage - it does not require additional materials. But there are also disadvantages: it is only suitable for removing the old whitewash, which is already falling off, and a lot of dust is formed during operation.

Wet

To remove the chalk "wet" way, the ceiling must be pre-wetted. To do this, take a sponge or cloth (you can roller), carefully urine in a bucket with water and rub a small piece of ceiling.

You can also carefully clean the surface of the sprayer. After 10-15 minutes, the whirlwind will swell, and it can be easily removed by the spatula. To increase the speed, it is possible before removing the spins on the first section to moisten the second water. When the whitewashed from the first plot will be removed, it will swell on the second.

You can water the blades not by conventional water, but soapy.

For its preparation, they take a third part of the piece of economic soap (grated), a bucket of warm water (10 l) and 5 tablespoons of soda.

Obviously, after such harvesting, the vacuum cleaner can be thrown out.

"Wet" method has an indisputable advantage - When working, it is formed much less dirt than in the first way.

But it is bad that it is inconvenient to constantly go down to wet the sponge. Even if you put a bucket on the stepladder, while you steer the ceiling plot, when removing the blots, the spatula will have to pull it down so as not to prevent.

Glue and Clayster

To remove whipping with glue or hubble, you will have to make additional efforts and incur some costs. For the removal of chalk glue uses the usual wallpaper glue. It is possible to remove it and the hub, which is made of flour or starch and hot water. You need to lubricate the ceiling and wait for the surface to dry.

Glue (Cleaster) will connect the spam particles, and it will easily come down.

When using glue and alee, completely little dust is formed. True, financial costs and efforts are required for the preparation of the solution, but they are not so great.

How and what to wash off whitewashing from the ceiling is now clear, but there are nuances. Tips can significantly alleviate the process:

1. For the smooth surface, it is convenient to use a wide spatula for hard to reach places - narrow.
2. Spain surfaces are better to wash immediately, dried chalk makes it quite difficult.
3. When washing surfaces, water needs to be changed as often as possible so that there are no divorces.
4. If you make a small box to your hand or spatula, the mud to the floor will fall significantly less.
5. If places are falling off in places, and in some places it is completely smooth and dense, two ways of removal can be used.
6. If it is decided to take a roller to wet the ceiling, then it is better to use foam.
7. If dark spots remained after working on the ceiling, they can be processed white.

   Spots light and disappear.

To check the quality of work, you need to spend your finger along the dry surface of the ceiling. If there is no chalk on it, the work is perfect. If you are, then this is not a reason to redo! It is necessary to buy special primer in the store and treat the surface, and then cover the water-level paint.

So, it became clear how to wash off whitening from the ceiling. Now the ceiling can be aligned, painted and decorate to your taste, and thus draw your house with modern and cozy.

This ceiling coating with a lime or cretaceous solutionThanks to which pores appear. Through them, the surface is capable of breathing.

This ceiling decoration is durable and resistant to erasure. Pooks remains one of the popular ways to design a house, but many are already wondering - how to clean the ceiling from the blots?

Regardless of what material you are going to separate a new ceiling and wall covering in the room, the previous whims must be removed.

Preparatory stage

To remove whitewashing from the ceiling has passed successfully, you need to thoroughly prepare, as the work itself is difficult and dusty.

You need to create all the conditions for work in advance.

Additional complication is still the fact that workplace Located above your head, which is not entirely convenient.

That's what you need to do before remove whitewear from the ceiling:

1. 1. Take all things and objects from the room in which you plan to repair.
2. 2. If there are some things or furniture that cannot be made, cover them tightly with a polyethylene film.
3. 3. Clean the floor or blast furnace floor, and on top spread paper, or newspapers so that the unnecessary moisture is well absorbed.
4. 4. Prepare the appropriate protection for yourself: Blank your hair, put on things that do not mind stain, as well as glasses and respirator.
5. 5. Depending on the selected method of cleaning the ceiling, please necessary tools And do not forget about the lap.

What instruments need?

Selecting a tool for work will depend on the selection method you choose.

Often, several tools are required for one method, since the removal itself consists of several stages. Most often you will need:

• soft roller (which is used for painting walls and ceilings);
• brushes;
• brush with soft bristles;
• large sprayer (or just a sprayer);
• thorough sponge.

Various means for the preparation of solutions (iodine, salt, vinegar, chalk, flour, vapora, etc.) may also be needed.

What ways are best to wash off whitening?

There are many techniques and methods that can be removed from the ceiling quickly. They can be divided into two groups: wet and dry (alone related to aqueous solutionsother - no).

How to quickly wash off whitewashing from the ceiling with water with salt?

Removal of whitewashing water is a long and complex process, but the most economical and effective.

Such a method is used to remove the chalk whitewash, as it is less moisture-resistant compared to the limestone.

Cleaning the ceiling using water requires a conventional foam washcloth and kitchen salt. Perform the following steps:

• in 10 liters of hot water, dissolve 1 kg of salts;
• then leave the mixture for a while so that it crept up to 45 degrees;
• with the help of a sponge is wellhedto the ceiling.

Important Tip: Try to simply change the solution so that it was smaller than the flush ceiling.

Also, the blots are removed ordinary warm water. It is enough for you to moisten the ceiling using a sprayer or brush. As soon as the whits are well splashing, start the layers with a scraper.

Blur ceiling from whitewashing using adhesive composition

The glue composition (still called the Cleaster) is able to remove the whirlwind from the ceiling quickly and without excess dust. It is the lack of excess dust that is the main advantage of this method.

Here is a step-by-step instruction:

• we need water, flour or starch (with the calculation of one liter of water two tablespoons of flour or starch);
• wept in cool water;
• add to boiling water and interfere before the formation of a liquid state;
• construction roller cover the ceiling with a thick layer of glue and leave to dry;
• spatula Remove the remnants of bliss.

If you do not want to make it yourself, you can take advantage of the usual production looping gluewhich can be purchased at any construction store.

How to remove whitewashing from the ceiling using old newspapers and wallpapers?

Washing plays from the ceiling with newspapers and wallpapers is quite convenient, but will require a little longer.

Basically, this removal method is used for lime blots. To clear the ceiling from the blots, use the instruction and stick to the sequence:

• preparing glue solution (In the previous way, the instruction is painted in more detail) and it is thoroughly stirred - we need a homogeneous mass;
• using a roller, or some wide brush, evenly coating the surface with adhesive mortar;
• we take old wallpapers and newspapers, soaked them in a glue solution and attach them to the ceiling already covered with this solution;
• we leave for some time to dry.

When the adhesive solution and newspapers are dry, you can remove them from the ceiling. Together with the paper should be detached to the top layer of whitewash. If some elements do not go away, you can scrape them with a spatula.

Important Tip: When attaching newspapers and wallpapers for the ceiling, leave the edges not touched - so you will be easier to shoot them.

What to wash off whitewashing from the ceiling yet?

In addition to using those mixtures and solutions that are described above, there are several more recipes for the preparation of compositions that can quickly wash off whitening from the ceiling.

The most popular among them:

• alcohol solution - You need to dissolve two tablespoons ammona alcohol in ten liters of water; Then apply to the ceiling and remove the remnants with a spatula (this mixture is well suited for removing lime blots);
• iodine solution - In the same ten liters of water, it is necessary to dissolve the joda jar, to wash well, apply to the surface and scraping (such a composition is able to dissolve even the thick layers of blissing);
• acetate solution- At the same amount of water, add two tablespoons of acetic acid and three tablespoons of detergent;
• special brittle removal solution - you can purchase at any building material store; This means is applied using the sprayer and leaves a lot of dirt.

How to wash off whitewashing from the ceiling with rust?

Despite the strength and reliability of which possesses bled ceilingPrevent the appearance of rusty spots is very difficult. Rusty spots On a white surface looks inactively.

Shaving such a ceiling again from above - it is useless, as the rust will come over and through new layers. Such a whitewash is best removed by applying a vigorous solution.

To prepare such a solution, you will need Water (10 L), soap (250 g), dry glue (240 g), chalk (2.5 kg), olif (30 g), copper sulphal (130 g).

First, you need to dissolve the vitriol in the water, then add everything else to add and thoroughly mix before the formation of a homogeneous mixture.

The finished remedy must be applied to the ceiling (so that each corner fell). After a little time, while the whirlwinds separated, try to clean the surface with some kind of tool (the spatula is perfect).

If the whole layer moved well, wash the entire ceiling and start grinding.

How to remove whitewashing from the ceiling without glue and water?

There is another way to remove whitewashing, which is to use a special tool. This tool is a grinding machine.

Using it, you can very quickly remove the old bliss. At the same time, do not forget that this method It entails a lot of dust, so try to remove all the furniture from the room and get dressed well, including glasses and a respirator.

Regardless of which of the above listed ways to remove whitewings, you decided to take advantage of a few more points.

• If the area for removing the blots is big, process it small sites. For example, while the tool is absorbed into one section, you handle the other. This will help you to save time.
• When choosing a spatula, look for a special spatula with a container. Working with him, all dust and dirt will be assembled into a container without spilling around.
• If some part of the blotch does not want to move away, use the hammer to learn it.