Table lamps - far from the most necessary devices for lighting. However, it is thanks to them that it becomes comfortable and cozy. Among other elements of lighting, table lamps are the most simple in the installation, compact, light and universal. It is not necessary to add such a fixture to the interior you need to go in search of shops. You can add originality and create a unique device in a single instance or resort to the restoration of the old lamp. How to make a desk lamp with your own hands, you can learn from the article.

Attributes for needlework

Desktop lamp can be created absolutely from any necessary and unnecessary things. Everyone in the house will find old items that throw the hand did not rise, but also there was no place to apply them. It is time to give them a second life.

For decorating lampshar or ceiling, you can use such details:

• beads, beads, fiberglass, sequins, stones, seashells, buttons;
• cocktail umbrellas, opening parts of tin cans;
• plastic bottles, spoons, forks, covers, yoghurt, tin and other jars;
• fabrics and textiles, braid, ribbons, threads, bows;
• newspapers and paper cuts, drawings for decoupage technique;
• toys both soft and hard, right up to the smallest of kinder surprises.

As a base for a table lamp, you can cut the wood supports with your own hands or use ready-made from under anything. You can also use flower pots, plates, an updated foundation from the old lamp and many other items or do without reason at all.

A ball, a ball, which at the end of the work, can just extract at the end of work.

The easiest way to revive the interior with a new lamp is to repair the old one.

Bottle Table Lamp

This version of the design of the light source is very common, as it is much easier to make a desk lamp of the bottle than it seems at first glance.

A bottle can perform excellent base for a table lamp or an independent lighting device without supplementing the lampshar. This is especially true if there is a bottle or bank of the original shape or color.

Bottle lamp with their own hands can have 2 light connectivity options:

• external - cord and cartridge for light bulb are fixed outside the bottle;
• inner - cord is done through a bottle.

With the second embodiment, the table lamp from the bottle must be pre-done in the bottom hole so that the bottle does not burst. To do this, it needs to be buried in a sand bucket with sand down, leaving about 5 cm above the sand. It is necessary to pour a small puddle of water. With the help of a diamond drill in the center of the bottle, you need to drill a hole, holding a drill strictly vertically. A similar hole must be done in the bottle cap. Now you can design the desktop lamp for the desktop, bedside tables or windowsill.

Distribution lamps

To create a lamp lamp lamp with your own hands, it is not necessary to be a designer or decorator. Exists great amount Options for decorating lamps, among which everyone will find suitable for themselves not only to taste, but also bye. Several ways to make lampshade for desktop lamps from submitted items:

1. Decoupage technique. Breathe new life in old lamp Or update the subject of the interior with a long-known decoupage technique. Thanks to decoupage anyone old thing It will look like the store shelves. It is only necessary to find beautiful napkins for decorating, fit into the interior and not to move away from the rules of execution of decoupage.
2. Fabric lampshades. Such types of lamps fit well into the Styles of the Country Interior, Provence. You can upgrade the old lampshade with a bright cloth, you can create a completely new on the frame of the wire, for example, and patchworks. P6
3. Volumetric flowers and decorations are perfect for romanticism or Moroccan style. You can create decorating elements in the form of flowers from napkins, ribbons, threads, fabrics.
4. Embroidery at the lampshar. You can use beads, large beads, sequins.
5. Mosaic from any flat objects or glass.
6. The effect of ombre is a sign of minimalism. It is enough to stretch well on the frame painted fabric with two smoothly moving in each other with flowers.

Several ways to create a table lamp for a doll

Often girls are asking for their parents addition to his favorite doll in the form of furniture, clothing, accessories. It is not necessary to immediately deny the child in the request, if you have not enough cash. After all, knowing, for example, how to make a table lamp for dolls, you can also please daughter, and on time to come up with an interesting occupation.

Examples of creating doll table lamps:

1. For the manufacture, you will need: the cap from the bottle, the old unnecessary corrector with the tassel, the paint of the desired color, awl, glue. It is difficult to imagine how to make a table lamp for dolls from all these items. But this is only at first glance. First you need to cut off the charter, leaving the cap with a stick and wash them carefully. Then, with the help of sewing, you need to do a hole in the cover from the bottle clearly in the middle. It remains on the glue to plant a wand with a cap from the corrector into the cover of the cover and paint the basis into the selected color.
2. In the second embodiment, the base of the lamp will be a button, a frame - a beads strung on the toothpick, a ceiling of the bottom of the drinking yogurt bottle. Details are put on such a sequence: buttons → Glue → Beads → Toothpicks → 5-6 Beads → Absorce → Glue → Bead.

Options for creating table lamps

Increasingly in design modern interiors Preference is given natural materials and eco-style. Lamps are not behind. Wooden desktop lamps There is a huge amount, but much more pleasant to create decor for its interior yourself, especially if there is interesting ideas and work skills.

Very simple I. original way Create a lamp - use is used and LED bulbs in the ribbon. A small log needs to cut into round uniform layers and make the center in each small hole For the base. The center inserts the tube with lED ribbonAnd the layers themselves are located over the other at a distance through which the light will penetrate.

With the ability to speak well the jigsaw or an electric saw can be created from a decent part of a log of any shape, subject or outline of the character. It will only be left to polish the base made, hold the cord, insert a light bulb into the cartridge and if you wish to make a lamp.

An even simpler way to create an elegant eco-lamp is to be given the same in the size of the sticks and consolidate them at exactly or the painter on the old frame of the lamp. Shade, if desired, can also be updated.

The question of how to decorate lamps from the tree will not even arise. After all, such products themselves will be decorating the interior.

Video

Hello to all lovers of homemade. I think each house has a light source, whether it is a lamp, chandelier or backlight, which to one degree or another helps in everyday lifeBut boast of originality Such devices can very rarely, since the manufacturer usually does not make a unique product, only except those that to order, but such pleasure will be hidden. It was about this that it was decided to make the original desk lamp of the beech with their own hands, and all who little worked with the tree the assembly of such a homemade will not seem impracticable. First you need to decide on the material and tools that will be useful in the manufacture of this self-made.

Before reading the article, I suggest watching a video about this homemade.

To make a desk lamp with your own hands it will be necessary:
* Booke boards
* Tree glue
* Pleismus
* Hand mill
* Grinding machine
* Sawing machine
* Clamps
* Furniture oil
* Drilling machine
* Dimmer
* Wires with fork
* Electric drill
* Sleeve with carving for furniture with M12 thread in 1,25 puzzle
* Super glue
* Stud M12 step 1,25
* Rubber screed
* Sandpaper

That's all you need to build such a homemade desktop lamp.
And now the most interesting, the assembly process.
Step one.
First you need to drive all the bokeh boards on the reysmaus, it is done in order for the thickness of them the same.

We do it from all four sides.

After that, sawing wide board On small suites, a width of approximately 5 cm, of which the lamp will be held.

Step second.
After boards are ready, they must also be driven on the flight, and then cut into small blanks using a sawing machine.

Composite parts must be calculated in advance, the angle of sleep will depend on their number and the desired size of the lamp itself. For simplicity, we take 8 parts, on each of which you need to do with a drink under 45 o on both sides, it is done the easiest way on the sawing machine.

Step Three.
When all 8 blanks are adjacent to the size of them can be glued, it will help us with adhesive for wood. Before gluing, it is necessary to glue the glued surfaces to improve the contact stain.

We smear the glue throughout the area of \u200b\u200bthe junction of each part and fasten with the help of a rubber screed, it is to the word, you can easily be made from a bike camera.

Surplus glue by removing a cloth and leave to dry for a couple of hours, but for now the glue dries away three more such details.

Step fourth.
After drying all four octagonal billets, it is necessary to make a drink at an angle of three of them to create a lamp shape. How to do it more clearly seen in the photo. You also need to make an octagonal bottom.

Pitch fifth.
We glue four octagon into one whole, after drying, we grind on the grinding machine before getting a form, similar to a vase.

When grinding, rotate the workpiece as smaller as possible, the correctness of the lamp shape will depend on it.

Step six.
It's time to make a leg for a lamp, with which you can adjust the direction of light.
We heat the four small bokeh boards and on the grinding machine twigrating the edge, for this it is best to draw a circle in advance in advance.

In the center of this circle drills the hole, we make it on both sides and on each of the boards.

Then you need to make three small planks, adjacent to both the head of the lamp and to the base, which will also be rounded on the one hand, and for their gluing there will be two small blanks, as in the photo.

We embroine the places of glue glue and press the clamp.

Step seventh.
To regulate the brightness of the light, it is necessary to make a wheel, which after will be planted for a dimmer. Similarly, this wheel make six more such, but to fix the position of the lamp.

In the middle of drilling a deaf hole and glue the M12 thread sleeve with a step 1.25 on the superlocks and screw up to the stop.

To fix the position, three M12 studs in 1.25 increments will be needed, which will pass through the entire fastener of the lamp.

Step eighth.
Now you need to make a shield or the so-called foundation on which the leg of the lamp itself will be fixed. The form of it is also round, made using grinding machine.

Surface grinding grinding machine And on top of the oak thin plate we glue the circle with a smaller diameter.

For durable gluing, we use clamps, and better at once.

In the meantime, the glue dries can be applied the first layer of oil on the head of the lamp.

Step ninth.
Glue drying, the oak circle was glued, which means we go to the installation of the dimmer. We disassemble its body, we will need the inside the inside, drills the hole in the oak mug and placing the size of the board on the reverse side, after which manual milling We remove the surplus material for landing Dimer inside.

The chandelier indoors is not only a lighting device. Without exaggeration, it can be said that it is the main decoration of the room. Particularly valuable are things made by their own hands. This allows you to highlight the special taste of the hosts of the dwelling, as well as an outstanding and creative mind. Definitely this species Work is quite complicated and requires increased concentration. But at the same time, when creating decoration for your home, you can find in it many interesting and extraordinary solutions!

This article presents some ideas for the chandelier decor with their own hands, as well as instructions for them. Everything is written so simple and it is clear that anyone will be able to fulfill the conceived at home.

In order to make a chandelier, sometimes use the most unusual materials. For example, everyone already familiar glass or wood, plastic and so on. But sometimes, when I want something quite "unusual", and wooden spanks come into business, and glass bottles From under the wines, both banks, and all sorts of wood branches, and cardboard, and even straw. You need to choose depending on the idea of \u200b\u200bthe creator and from the wishes of the owners of the apartment. Also need to take into account common interior Premises, where the prepared product is expected.

Interesting idea chandeliers from plastic spoons

Disposable plastic spoons are one of the simplest and easily accessible materials in order to create a chandelier in the room. Their benefits are in a low price, diversity. color Gamma. and will serve such a material for quite a long time. To create such an extraordinary chandelier, you will need a minimum of investments, both physical and material.

Materials:

• empty bottle from under drinking water, volume of 5 liters;
• plastic spoons (their quantity depends on the size of the bottle);
• plastic glue;
• old chandelier (or rather - a cartridge from her);
• acutely sharpened knife.

Process of creation:

1. First you need to prepare a plastic bottle for follow-up. Remove the label in advance, cut off the bottom, dry well.
2. Then you need to get plastic spoons made of packaging and a knife carefully cut off unnecessary handles, leaving about 2-3 centimeters above the "scale" level.
3. Print the blanks "draws" need to base the bottle. On the left "tail" apply a large number of glue and press it to the surface (convex side of the spoon outside). It is necessary to cover the entire bottle in a circle, until the entire perimeter is engaged in plastic "spoons". It is advisable to arrange them in a chess order and slightly move together. So there will be less "free spots".
4. With old unnecessary chandelier It is necessary to remove the cartridge, and then place it in the already attached and dried bottle and lock on the frame.
5. The decorative bowl can also be made of plastic spoons: "draws" stick around the necklacca neck.
6. Install and connect to the chandelier, check its work.

Note! Possible option decorative painting Or painting spoons in absolutely any color. So your product will look even more beautiful and more original!

Chandelier of plastic bottles in the form of leaves

Another one an unusual option The interior will serve as a chandelier performed in the form of leaves. It creates from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most courageous ideas.

Process of creation:

1. Cut plastic bottles on the workpiece, in shape resembling future leaves.
2. Each billet is already finally fixed.
3. A soldering iron with a thick stale and one-sided beep need to slightly rush the cuts from each leaflet in order to give the future product the greatest effect.
4. In the same way, thanks to the paintwork you need to give the billets the structure of the sheet. It is necessary to act extremely gently and accurately, because it can be easily done in plastic. Such a leaf with outlined contours of resistance and slightly fused edges will look over.
5. The hot needle of the "legs" of each leaf should be paid several holes in order to attach them.
6. Due to the thin wire, form branches and fasten to the steel wire frame.

Also an excellent idea will be the manufacture of a new chandelier in the form of a plaffron for a lamp or a lamp on the table. Thus, it will be an excellent addition to the previous product!

Paper chandelier with paper butterflies

The most common product option is the chandelier with butterflies. And this is not good. Let's start with the fact that this option looks luxurious and expensive, and secondly, its manufacture does not require special physical costs. Thus, even a child can participate in the creation of a chandelier.

Process of creation:

1. The basis is either an old chandelier or a similar framework. If there is no such, then you can take the simplest wooden or metal rim. If there is no such material, then as an option you can take a thick wire and make about 2-3 modes, so that a circle formed.
2. Cut butterflies from paper by template. You need to take a butterfly pattern and adjust it for the desired size. It also looks very unusual when the chandelier is located on the chandelier of several sizes at once (again, depending on the desire). Transfer the outlines on paper and carefully cut out, preferably an overwritten stationery knife or small non-rigged scissors. The material for the templates themselves is better to use a dense, not strongly contaminated and not attracting dust. For example, very badly suitable for the product velvet paper, because in the future you will need quite often vacuuming chandelier.
3. Take a thread from Capron or a transparent fishing line and consolidate butterflies on it. You can mount two types: either penetrate butterflies, or glue them to silicone glue.
4. Next, attach the threads with butterflies to the base of the frame and decorate it.
5. You can also try interesting optionIf you do a wire ball! As a basis, it should be taken from the chandelier and to locate on it with adhesive pistol Multiple butterflies templates.

Chandelier of fabric

This chandelier is also based on the frame. As in the last variant, it will be suitable for its manufacture or old metal frames or a dense wire.

After you first prepare the basis, proceed to the abundance of the fabric, from which the lampshade will be made in the future. How long will be ready productDepends on your desire, but it is worth considering that the width of the tissue must be the same as the diameter of the frame! As soon as you finish the pattern, you need to make fitting.

Another nuance is that to sew the top of the fabric will need to be directly on the frame, and this means that it (frame) must be solid. In the other case, if it is possible to turn it directly into the fabric, then initially the upper edge of the pattern should be adjusted and smoothed, and then smooth the iron. Then we grasp the seam from the side of the product.

In order for the lampshade not lost the form, the material should be given due attention. If the fabric is too light, "air", then the bottom of the product should be dragged. To do this, you can use cardboard or fishing line.

It will also beautifully look neatly sewn of fringe, lace or braid. But not "overload" the product! The process of creating a chandelier of fabric is similar to the manufacture of a chandelier of lace. So you can safely experiment with materials that are located on the frame.

Claface made of thread and balloon

Materials:

• dense threads, such as woolen, cotton, or jut rope - at least 1 meter;
• cartridge;
• petrolatum;
• pVA glue;
• tassel, in order to apply glue and vaseline (it is desirable that the brush does not linen);
• 1 or 2 pieces balloons (the first in order to work with him, and the second to check the ready-made product, if desired);

Process of creation:

1. Inflate the ball to certain sizes, secure. Remember that the work done will exactly repeat the outline of the ball! An marker draw a couple of circles at the top and below, in order to determine the borders of the winking of the thread.
2. Using a brush to wash the ball around the perimeter by vaseline.
3. PVA pour B. plastic container And thoroughly treat them threads (it is not desirable to apply glue immediately for the entire length of the threads! Proceed them as you wound on the ball!).
4. Considering the borders that you put a marker, hide threads on the ball. Do not forget that depending on how the density you wake up, the future appearance Products.
5. After the winding, you need to leave the product for a day until it is completely dry; After complete diesel, you need to burst the ball and remove through the holes.
6. In the top cut the place, and insert the cartridge.
7. In order to be fully confident that the product turned out to be strong, you can insert a ball and inflate. Similarly, you can check the flexibility and reliability of the lampshar.

Alternatively, you can paint the design by a can acrylic paint, attach all sorts on it decorative ornaments, such as butterflies, artificial flowers or beads. Also, an excellent idea will be located a few balls in the form of a grape cluster and make them together.

Wine Chandelier

This version of the chandelier is a bit more complicated than the previous ones. Make a chandelier for this is quite difficult, the manufacturing process will require accuracy and attentiveness. However, you will like the result!

Materials:

• bottle of wine;
• glass cutter;
• sandpaper for grinding edges;
• cartridge;
• electric wire;
• metal or wooden framerim.

Process of creation:

1. First you need to prepare the bottle itself for further manipulation with it. First step in the level of need for you smooth line around the perimeter. This is required in order to cut off the bottom of the bottle using the glass cutter;
2. In order not to cut down the glass, you need to polish sharp edges emery paper;
3. Stretch the wire through the throat of the bottle and then connect the cartridge;
4. Attach the bottle on the frame.

You can also decorate the bottle with all sorts of decorative products, or leave it in initial form. In any case, it will look original and effectively.

The number of products on the frame depends on your desire. You can either leave one bottle, or fasten four or more bottles at once.

The idea of \u200b\u200bchandeliers from laser drives

This idea is great for those who have a large number of laser drives in the house, and the hand is not raised to throw them away. Immediately it is worth noting that the manufacturer's options and the result may be the most different. It all depends on your imagination and creativity!

Materials:

• two round wooden planks different thicknessand which are slightly larger than the diameter than discs;
• racks made of metal or wood;
• fluorescent Lamp;
• magnetic switch;
• disks.

Process of creation:

1. In the table with a greater thickness to make a hole and install a starter with a switch in it.
2. Then connect all this to the lamp.
3. On the lamp ride discs.
4. Install racks around the discs and secure the top.

The finished product will delight your owners for a long time, and it does not require special care. Such a type of chandelier is not desirable to post in the children's room, so that the child cannot be harmful (only if the chandelier is hanging out of reach).

Chandelier in the style of "Shebbi-Shik"

To create spectacular lighting in the room, you can also make a chandelier of fabric or beads. As a result, a certain candelabre or a slaffon in the style of "Shebbi-Chic" will be obtained.

Materials:

• ready metallic or wooden frame (or it can be made of old fives, a garden basket, thick wire);
• cartridge and lamp;
• chains and threads for decorating;
• all sorts of beads and beads.

Work on such a flappon is not difficult, but is a very painstaking occupation. Such chandeliers usually consist of two or three rings levels that are located on each other. It all depends on the size of the selected foundations. If you take the rings of one diameter, the finished product will be performed in the style of "Modern".

One of important moments It is that before the start of the design chandelier you need to paint and wind the frames with decorative materials!

Approximate consumption of beads is:

• For the bottom of the lamp, 16 mm beads, about 15-17 pieces per thread;
• For the top of the lamp, 12 mm beads, about 35 pieces per thread.

Naturally, when rolling the beads to the thread, you can increase or decrease their quantity or the degree of thread tension. But it is desirable still stock materials over the norm.

The essence of the work is to hang the threads with the "waterfall" or "cascade" beads so that they flow along the design down.

In order to make the effect of "muffling" of light, you can strip the frame with a dense cloth.

The chandelier made by his own hands will definitely contribute to the interior fresh notch, originality and beauty. You will immediately notice how the room will play with new colors, and your guests will sincerely admire your work, hardly worry and original taste!

90 photo ideas chandeliers made by their own hands

Reading time ≈ 8 minutes

Everyone wants to decorate their house with stunning lamps made by their own hands from healthy materials according to individual unique design. These original products Can transform not only a separate room, but also the entire apartment. To have an exclusive thing in the form of a sconium or a lamp of an unusual form, it will not be necessary to buy expensive materials. Here we need only scribe funds, your fantasy and a little creativity. Consider the very best ideas and options for homemade decor.

Original pendant lamps-mugs

Masterpieces from simple materials

Plafones and others lighting devices It can be made almost from any material capable of changing the shape or separated into several parts. It can be a tree, plastic, metal, paper, glass and even individual household items. Old bottles, plates, dishes, toys or musical instrumentsBut the main component is still a light bulb.

That is why it is important to envisage that the lamp is strongly heated and safe for others. Otherwise, it all depends on your imagination and opportunities.

Room light in textile lampshade on marine topics

What criteria are taken into account when choosing a model of the lamp:

• overall room design;
• interior design style;
• the size of the room and the height of the ceilings;
• the level of illumination and the number of window openings.

But not always the creation of the product can be scheduled in advance. Sometimes the materials found at home or in the garage can push the idea of \u200b\u200bcreating a real masterpiece, as in the photo.

Wall and table lamps from old utensils and equipment

Consider some unusual options:

• from tin cans - great idea To improve the workplace, you can put both in the office and in the student's room. The bank, if desired, can be decorated with paint, threads and even draw a beautiful print;
  
• from the hangers - it is better to use wooden, Okrive each and subsidence under the desired size. At the same time, you can create any shape, as well as to cover such a lamp to the paint;
  
• from wood sections - wood will always be relevant and fashionable for interior design. To create a unique designer thing, sleep needs to be well treated, dried, coat with a protective solution and install the top of the old lamp. As a last resort, the base under the lamp shade from the store is used;
  
• from glass bottles - the time spent on the work cannot be considered spent in empty. After all, as a result, such beauty is obtained;
  
• from old drums or sports equipment - products look very unusual, suitable for decorating a teenager room, a working office or dacha house. Drum installation And old skis - also a great solution for your own restaurant or office, as in the photo;
  
• from small bicycle parts - the first such idea came to the designers from Texas. Artists built balls from small spare parts of old bicycles;
  
• pumpkin lampshares - beautiful patterns are cut on the peel, the pumpkin itself will dry, and the bulb is placed inside. This will become a real masterpiece and will delight households for a long time;
  
• of paper molds from under cupcakes - consolidating them in a circle, around the main lamp, you can make a beautiful night light for a nursery or bedroom;
  
• from a set of terk - kitchen utensils can be useful and beautifully sparkling over his head, creating special Charm in the interior, as in the photo;
  
• the lace lamp is products from openwork napkins and knitted handkerchiefs. Tissue is covered adhesive composition for fixation;
  
• in the canteen devices - if many spoons, forks and knives accumulated, and throw out a pity, create stunning compositions for designing kitchen sheds and chandeliers. Cutlery can be fixed with wire, rope and glue;
  
• suspended sconces in cups - will be by the way in the cozy evenings behind the tea party in the kitchen or summer;
  
• from the colander is excellent option For any. It is better if the product is covered with enamel, but such a lamp can be painted in any bright color;
  
• wires - this is the most simple idea For Hand Made, because to cope with the manufacture of any newcomer. It will take only the wire of bright shades, a can with paint and steel wire;
  
• from the veneer - the material can be weaved into a round ceiling, and parts to bore adhesive solution. You can use veneer remaining from repair;
  
• from the rope - in the conditions of the modern city with the help of such a lamp can be created at home cozy atmosphere of this province and rustic comfort;
  
• from the branches is an extreme design, suitable for Eco style, country and loft. Things can be collected together with a jute rope, giving them almost any shape. Compositions are created different sizes, lacquered or left unchanged;
  
• from large beads and stones - similar gorgeous design transforms any interior. Bust lamps are an excellent decoration of any bedroom, living room or;
  
• from the old wheel - even he can be used, clearing with rust and covering the paint of the desired shade. Light bulbs are placed around the perimeter in any order;
  
• shade handmade From old photos, can decorate a desk lamp or outdoor, as seen in the photo;
  
• from the tongues from cans - for this, tin cans from soda, beer and just canned food. Some time will have to save the rings, keys and tongues so that there is enough to create a lamphateer or a ceiling.
  

All lamps or lamps made by their own hands from girlfriend can have a different configuration. Optionally, it is possible to make it possible both outdoor, desktop and suspended model.

Chandelier from spanings

Not always to create original interior It is necessary to buy expensive designer furniture and accessories. Decor and other items can be made independently from simple means. Consider a master class on the manufacture of a room chandelier of plastic spoons - with work you can manage in just 30 minutes.

Required materials and tools:

• a large number of disposable plastic spoons;
• empty plastic bottle;
• glue;
• chandelier cartridge;
• scissors and knife.

From the surface of the bottle or any other plastic tank, you need to remove all labels using soap mortar. Then the blanks are made from spoons, the handles are cut off. Details are fixed with glue to the bottle surface, it is important here to observe a certain order or a conceived combination of rows and colors. Capacity should be covered in a circle, following the transcends and visible excess glue.

Plastic chandelier of white spoons

Glowing ball of threads

it perfect solution For a children's or bedroom in Shebbi-Chic style. To create a chandelier-ball in gentle performance, you will need to be purchased:

• glue;
• threads or harness of any suitable shade;
• balloon;
• petrolatum;
• needle;
• plafof.

First you need to prepare, inflated and knitting the ball, and then covering it with vaseline. In a tube with glue, we make a hole through which we will lend the threads and glued to the surface of the ball. When the ball is completely covered with ropes, and only small lumens remained, we leave the product for a day so that it dries.

The next day, the ball skeins the needle to be blown away or burst. The circumference of the ceiling in supply a felt-tip pen on the surface of the circle, then we make a break desired size. Hole is needed to insert the cartridge and connect the lamp. The cartridge is well fixed with glue and additional threads.

Paper Bedroom Lamp

To get a beautiful table lamp from dense paper In the style of minimalism, you will need:

• lamp set or lamp;
• glue solution;
• putty;
• paint;
• dense cardboard to create a template;
• scissors;
• art ribbons;
• block for grinding;
• wooden weight loss;
• construction knife or drill;
• line.

Room lamp made of tight cardboard

First you need to reprint the template or simply transfer it to paper, with each triangular shape should be 6 pieces from each 6-square.

Manufacturing technology:

If you have inspiration, you will definitely make your own lamp - the product can be made from any girlfriend. The video master class is shown below how to make a design lamp of wood using drawings and schemes.

If you are tired of boring and monotonous things in your apartment that you see every day, then it's time to diversify the design with hand Made. Table lamp with your own hands is an excellent option to start. It does not require special skills and trouble, and the result often exceeds expectations. In this article we will tell you how to make a desk lamp with our own hands than to decorate it and how to connect it. We also prepared an excellent photo selection for your inspiration for creativity.

Table lamp do it yourself: the main elements of the design

The most popular I. simple materials To create a desk lamp with your own hands, it is: cardboard, paper, glass bottles, banks, plastic containers, pipes from water supply and cement. We will tell how from all this material to make a lamp.

The main elements of the design in the desk lamp of any type:

• Electromechanical - provides stability homemade desktop lamp and safe power supply directly to the lamp.
• The support is supported by a reflector or illuminator.
• Illuminator - Light bulb in the lampshar.

The desktop lamp electromochem is quite simple: network plug, cable, switch, bulb cartridge. Sometimes add voltage regulator. The cartridge for a narrow minion-base E14 is also attached to the thread or on the lamella in the form of a steel strip. For table lamp do it yourself best option - Chandelier cartridges with precipitated threaded flanges: between them you can hold the steel plank with the lampshar frame or the clamp for fastening on the hinge.

The table lamp must necessarily be electrically safe. This is especially true for lamps on hinges and consoles. Create desktop safety can be created using a simple scheme:

1. The cable must be round, in double isolation
2. Conductive cable veins are flexible, from numerous wires.
   The cross section lived from 0.35 square meters. mm.
3. Cable wiring locations must be protected by dense dielectrics.
4. The cable before entering from the inside is tied with a nodule or pull through the holes of the dielectric locking washer so that it cannot be broken. Next, it follows decoration and decoration.

Original lamp lamp lamp do it yourself

A lampshade must be manufactured taking into account not only aesthetic aspect, but also practical. It is important to fix it correctly, as well as make a comfortable opening for a light bulb. Paper, plastic and threads - materials that are most often used for the manufacture of homemade lampshar.

The simplest and most convenient material is paper. To create such a lamp, except paper, you will need: threads, PVA glue, sewing needle and scissors. There are many ways to make lamp lamp with your own paper hand. The simplest method - dial the bulb from paper strips to dial, while gluing them between themselves and on the poles. The form in the form of a sphere will further strengthen the continuing lampshade of paper.

Also elementary is the lampshade of disposable plastic cups, which are fastened by the stapler. This lampshade has sufficiently good lighting characteristics, but the appearance is quite utilitarian. Such a lampshade is well suitable for premises in which high-quality lighting is needed, but an aesthetic appearance is not required.

In the manufacture of lampshar of the threads, you will need at least 100 m. It makes no sense to use inflatable balls, like mandrels, because after 10-20 turns, the ball will begin to stretch in different directions and ruptures the shape. It is best for the mandrel to use tight-inflated, durable ball. The mandrel must be lubricated with vaseline. Further, pre-lubricate with glue, wind the thread on the ball. When winding, do not forget to leave the cable and cartridge hole. After a day, you need to blow away the mandrel, which, thanks to Vaseline, does not stick to threads. Also, threads can be replaced with jute, sisal or propylene twine.

Data lampshades form smooth soft light and so perfectly suitable for any room.

How to update lamp lamp lamp with your own hands

Old, boring, shabby and burnt lampshades can easily be updated with the help of healthy tools or create a new one at all. We will tell how to make it right and beautiful. As materials you can take any textile. Using fabrics and threads, you can sew or associate lamp shade in the form of a dress. Easy to decorate lamp lamp lamp with your own hands using: buttons, stickers, butterflies, beads, colors and various braids.

If you want to create original lampshane From the remedies, then here are the ways of a lot. To create such a lamp, it will be suitable: lids from tin, disposable dishes, your favorite pictures from the photo of the album, paper with drawings or just a lampshade, disgraced by your hands.

Enough to turn on the fantasy and you get original lamp In the interior of your home or apartment. In the photo below, see the selection of lamps for the table lamp with their own hands.