There are two different opinions on this issue. Some believe that plaque is not harmful to health, since it contains useful calcium. Others argue that it has negative effects:

1. It provokes the formation of kidney stones - this is a common disease that develops with the use of poor-quality food and water.
2. Blockage of blood vessels, which threatens atherosclerosis.

Scale is harmful to human health

The taste of drinks prepared with water boiled in a teapot with a bloom is not very pleasant. The larger the scale layer, the worse the taste of tea or coffee. Quite often, limescale becomes the cause of rapid wear and tear of equipment and its subsequent failure. Therefore, the question of how to remove scale in a kettle made of stainless steel is very relevant.

The easiest method to remove from of stainless steel limescale - to prevent its appearance. To do this, follow these simple rules:

1. Use only soft water - an aquafilter will help you get it at home. Alternative option- pour settled water into the container.
2. Boil only once - use fresh water each time you use the appliance.
3. Rinse the kettle before turning it on to remove white flakes from the walls.

Use fresh water each time you boil.

The rate of formation of salt deposits and their thickness depend on the material of manufacture of the device. Scale builds up more slowly on stainless steel.

Cleaning methods

Teapots made of stainless materials are widely used. They have only one drawback - the surface gets dirty quickly and easily, so it has to be cleaned quite often. How and how to clean the outside of a stainless steel kettle? The procedure is quite simple, but if the situation is running, you will have to spend a lot of time and effort.

Modern manufacturers offer a huge selection of products that easily cope with scale - Salit, Antinakipin, etc. All such drugs are used in the same way: add them to a container, boil and wash. But not all chemical agents safe. Do not pour boiling water over them or dissolve them in hot water, since the consequences can be unexpected. The composition must be mixed with cold liquid and only then boiled. Be sure to wear gloves, goggles, and a mask, especially if you are working with strong compounds.

Anti-scale

Regardless of the product chosen, the instructions for use should be followed exactly. This is the only way to quickly get rid of plaque. After all the manipulations, the kettle must be thoroughly washed.

To clean an electrical appliance, you can use not only household chemicals, but also. The following methods are most widely used:

1. Citric acid - dilute in water and pour into a kettle, boil and stand for about a quarter of an hour. The procedure must be performed twice. If the plaque persists, let the solution sit for a couple of hours.
2. Vinegar and baking soda - Prepare a baking soda solution and apply it to the walls. Then moisten a sponge with vinegar and wipe thoroughly. As a result of the reaction of the two substances, the scale dissolves quickly.
3. Canned Vegetable Pickle - Pour into a kettle, boil and let sit for about ten minutes. Perform the procedure several times.
4. Fruit acids - put slices of lemon, pears or apples into the appliance, add water and boil. But this method is only effective for light scale. For more severe deposits, use other methods.
5. Toothpaste - Squeeze out onto the brush and scrub the walls. You should not use bleaching compounds, as their abrasive particles leave scratches on the surface.
6. Carbonated drinks - Cola, Fanta, Sprite, etc. Boil them in an electrical appliance and stand for about a quarter of an hour. It is best to choose Sprite as it is colorless.

Use Cola or Sprite

Home remedies are harmless and will not spoil appearance teapot.

Specialized formulations are more suitable for the elimination of significant salt deposits.

If the listed methods do not work and the scale does not disappear, do the following:

1. Dissolve baking soda in water, bring to a boil and pour.
2. Mix citric acid with liquid and boil again.
3. Vinegar solution - Boil for half an hour, then pour.
4. Scrub the kettle with a soft brush if necessary.

This method will remove even the most old limescale.

This method allows you to remove even the most stubborn limescale. After any cleaning, boil water twice in the appliance, immediately pouring it out. This is necessary for the final removal of cleaning agents.

Remove rust

Under the influence of external factors, the appearance of brown spots... How to clean the kettle from grease and rust that has appeared on the outside and inside? citric acid and a soda solution with vinegar can easily cope with this task. Any active ingredient should be diluted with water. Individual spots can be treated with potatoes and then rinsed. Do not use hard brushes for processing - they destroy the coating.

Sometimes carbon deposits are observed on the teapot. You can remove it in the following way: fill in water in a large container, add soda and shavings, immerse the kettle in the solution and boil. When the water has cooled, take out the device and wash it with a simple sponge. Another way to clean a kettle made of stainless steel from fat is vinegar mixed with salt or soda. Apply it to a rag, scrub the surface and rinse thoroughly.

It is very easy to clean the kettle from the appeared rust and scale, especially if you do not bring it to a neglected state. If you wash it every time after use, there will be no scale. And for less frequent cleaning, install aquafilters, which will purify and soften the water.

The same cleaning methods are not acceptable for all kettles. Stainless steel dishes are normally exposed to machining... It is better to wash an enamelled or aluminum kettle using special household chemicals or gentle boiling. For cleaning, soda, vinegar, citric acid are used, Toothpaste, PVA glue or mustard powder.

Most housewives do not remove the kettle from the stove during cooking, which is why stains of grease and dirt appear on it over time. Therefore, the problem of removing such contaminants is quite urgent. But the question arises, how to clean the kettle from fat so that it looks like new.

How to clean kitchen utensils

Exists great amount various household chemicals with which you can clean the kettle and other utensils.

When choosing a cleaner, you need to purchase a product, depending on the degree of soiling of the dishes.

With small spots of fat that have formed recently, a low-budget remedy can also do:

• Fairy;
• Gala;
• Naturell.

And with dirt that has already eaten in and simply does not rub off, strong and expensive chemicals will help to cope:

• Mister Muscle;
• Shumanite;
• Cillit;
• Unicum Gold.

But it is better not to bring it to such a state.

We clean the kettle using household chemicals

All chemicals can be divided into two types:

1. Abrasive. Sold in powder form. Most often used for cleaning stainless steel dishes. They clean well and are inexpensive and easy to use. It is enough to put a small amount on a damp sponge and rub the kettle with rotary movements until it is completely clean. After rinse under running water.
2. Gel products. Used for gentle cleaning. The composition may contain acid, which promotes rapid cleansing. All safety precautions must be taken before use.

Important! Before using any product, you should read the instructions on the package.

How to remove fat on a kettle without chemicals

For those who are against the use of chemicals, there are folk methods to combat pollution. But a teapot with a burnt bottom will have to spend more time.

Note! To clean electric kettles from fat, it is better to use special household chemicals so as not to render it unusable or spoil its appearance by improper use of folk remedies.

Vinegar and baking soda

A mixture of soda and vinegar is quite aggressive, so it is often used by housewives to clean up heavy dirt, including.

1. Lower the kettle into a large saucepan and add water to completely cover the dishes.
2. Add vinegar and baking soda to a saucepan in a 1: 1 ratio. With light pollution, 3 tbsp will be enough. l. each component.
3. As soon as the water boils, timed 12-15 minutes.
4. Then turn off the heat and let the water cool slightly.

It will be enough just to wipe the kettle with a sponge under running water.

Soda

If you need to clean the kettle from fat not only outside, but also inside, you can use affordable means- food or.

Before using the powder, the kettle needs to be slightly warmed up. Then we apply soda to a damp sponge and rub the entire vessel with progressive movements.

It is better to start from the bottom, where all the fumes and soot have collected, and only then rub the rest of the surface. To make a stainless steel kettle shine like new, you will have to make much more effort than a regular dishwashing.

All that remains is to rinse the utensils plain water... You can use the same method.

You can also make a slurry from baking soda and peroxide in a 2: 1 ratio. Grate the kettle with the resulting mixture and leave for 12-15 minutes. All that remains is to wash and use it further.

Important! It is better not to wash enamel teapots in this way. Soda is a fine abrasive that can damage enamel.

For utensils with a delicate coating, there is a more gentle method:

1. Pour water into a large saucepan and add 1 tbsp baking soda. l. per liter of water.
2. Dip the kettle into a saucepan and let the water boil.
3. Simmer for half an hour.
4. After the time has elapsed, turn off the fire and let the water cool down.

All that remains is to wash the kettle. For heavier contaminants, you can add a little detergent.

Toothpaste

The toothpaste method is not potent. It will only be able to help with the faint grease stains on the outside of the kettle. But since the paste is always on hand, it can be used in case of stains or in an emergency.

Apply the toothpaste to the brush and rub the kettle thoroughly, giving Special attention handle, spout and bottom, because all the soot has collected there. After rubbing all the places well, you can wash off the paste warm water and then rinse with cold. Finally, wipe the kettle with a cloth to give it a shine.

Important! Do not use whitening paste for washing dishes with chrome and enamel coatings. This paste contains a fine abrasive.

Lemon acid

The safest method for cleaning cookware.

To remove stains, dissolve citric acid in a large saucepan of water and boil in it. kitchen utensils... If the end result is not pleasing to the eye, then the procedure can be repeated. You can also use lemon juice instead of acid.

Non-standard cleaning methods

Experienced housewives still use these methods, and they perfectly help to clean the kettle of old fat from the outside.

Laundry soap and PVA glue

To prepare a miraculous solution, you need to finely chop or grate the soap and add a couple of tablespoons of glue. Pour all this with 4 liters of warm water. To obtain a larger volume of solution, we increase the amount of all components in equal proportions.

In such a brine, boil all the dishes for 30 minutes and then rinse well with water.

Cucumber pickle

Who would have thought, but pickle from cucumbers can wash the dishes. To do this, all the dishes must be loaded into the boil and filled with brine. Boil for about half an hour and rinse with water. Residual salt can be washed off with a sponge and detergent. A simple and effective way.

Mustard powder

This method of cleaning was used decades ago. Apply mustard to preheated dishes and rub well with a damp sponge. Wait 20 minutes and rinse in water.

The better to clean your stainless steel kettle

Dishes made from such steel are very popular at the present time. But even the slightest pollution is immediately visible on it. It is better to clean a stainless steel metal kettle outside and inside by boiling in soda or soap solution.

How to get rid of grease and other dirt on an enamel teapot

Enamelled coating very sensitive to mechanical stress. It is better to give preference to sparing folk methods or special chemistry.

Important! To prevent the enamel from starting to crack, do not allow sharp changes temperature.

Cleaning the aluminum kettle

Scrubbing or subjecting aluminum kettles to other mechanical stress is strictly prohibited. Such methods quickly lead to the unsuitability of the cooking utensils and the appearance of corrosion on the utensils. using folk remedies: vinegar, ammonia and hydrogen peroxide.

So that the kettle does not have to be washed from strong dirt, it is enough just to wash it regularly with ordinary detergent and wipe it with a cloth.

For even more interesting methods on how to wash the kettle from fat, see the video:

Cozy corner [Question from a subscriber]

Tell me, who cleans a stainless steel kettle !? From the outside?

Ask your question ➨ http://vk.cc/1CUMod Sep 28, 2017 at 5:32 pm

Nastyusha (Bakur) Tried with melamine sponge, doesn't help much

Andrey (Arlyn) there are a lot of ways))
- pencil for cleaning the iron
- pemolux soda 3 effect
- regular soda or lemon juice
and to polish it, if it was cleaned with a metal brush or a washcloth - with goya paste, however, if before that there was a matte surface (as in the picture above), then polishing will give a Mirror ..

and you will have to polish the entire surface of the teapot, for example, with a felt circle-attachment for a drill or screwdriver. Although some manicure kits contain a polishing disc - so it is possible for them (meaning electric cars for manicure with nozzles).

Elena (Dimitris) Pour vinegar over and leave overnight. Pour vinegar in the morning, add water and boil a couple of times.

Anna (Jiro) I have a thermopot at home, she herself suffered, and then my aunt suggested. Fills the kettle, we send the package citric acid, boil (if a lot of scale can be 2 times). Leave for 20-30 minutes, drain the water, rinse with water and a sponge, and then just boil the kettle a couple of times. Every time with clean water and that's it.

Nastyusha (Bakur) Outside)

Svetlana (Sylvaine) Liquid Flat

Olena (Haden) cif

Katerina (Cwenburh) I have a strong water sediment at home.

I am saving myself inside with citric acid, but how can I clean it outside? plaque has accumulated around the handle, on the neck, on the bottom of the bottom and on the stand itself, a little bit everywhere! lemon. acid does not help, as if baked

Alyona (Vicki) Coca-Cola. washes everything

Yulia (Onella) there is an excellent company Selena Shine of steel, for metal surfaces, it costs cheap, about 30 rubles, in my kitchen an irreplaceable tool for many years, a stainless steel stove, all pots and kettles, too, after this tool everything shines like new.

Natalia (Folkert) Electrolux CLEANER and protection of stainless steel - cleans perfectly, the kettle is as good as new, I have been using it for several years.

Nastyusha (Bakur) Thank you !!

Shokhsanam (Harsh) Sponge and comets, then a clean damp cloth, just not under running water)))

Oksana (Aloisi) Cozy corner, From my experience, the most important thing when caring for outside, after use or cleaning, wipe the kettle and polish a little with a dry cloth so that no traces of water remain and limestone, this applies to taps and stoves.

Alina (Jagjeet) Wipe with a soft cloth in soapy water, and then with a cotton pad dipped in vegetable oil! Shines like new and no dried drops !!!

Tatyana (Denver) Toothpaste or tooth powder. It cleans perfectly and shines elegantly after cleaning.

Yulia (Onella) cif.

Tanya (Ettie) Table vinegar. Will shine like new.

Marina (Eirianedd) Boil water in a kettle, and while it is hot, gently rub it with a washcloth so as not to burn yourself.

Tags: How to clean a stainless steel kettle outside

How to remove fat from a kettle.

How to clean a stainless steel kettle? It turned a little black on one side. | Topic author: Sergey)

ARTHUR Is the outside blackened? A little warm water and baking soda.

Vadim Sprite!

Dima soda

Maxim I would grind a grinder

Ruslan It is easy to remove scale by boiling it with citric acid Dmitry. Outside can be cleaned with abrasives. It can be dry cleaning Eugene or mechanical cleaning Sasha. You can also just boil it by dipping it into a container with a solution of ordinary washing powder Andrey.

Roman Pemolux and the sponge. Or any tool for stainless steel.

Victor Today I cleaned with LOK, it turned out decently.

Denis
1. Boil water with vinegar, pour out, water with soda, pour out, repeat.

2. Soda soda and wait 10 minutes - wipe it off in one fell swoop.

3.boil with lemon peels

4.View in stores special formulations, in particular "Antiki-

pin "and" CITRO KALC LOSER ", consists of 3 sachets, each for one product

tseduru Nicholas.

5. I used citric acid instead of vinegar, it seems 2 Vitaliy

teaspoons, boiled it, let it boil, turned it off. When the water is lightly

cooled down, tried to clean the kettle. Then she poured water again, added 3

Anatoly spoons of soda, boiled it again and allowed it to cool slightly. Then again

boiled with citric acid and removed the remaining scale. The kettle has become

little white and almost new!

How to clean a kettle - podskazok.net

I personally have a metal (stainless steel) teapot with a whistle. Over time, plaque appeared both outside and inside the teapot. Quality...

How to remove fat from a kettle. - YouTube

How to remove fat from a kettle. ... 39 How to clean enamel pot, enamel whitening - how to clean an enamel pan - Duration: ...

With constant use, the kettle gets dirty and even with regular washing it loses its shine and looks worse and worse. Leaving it on the stove while cooking other dishes will cause oil and grease stains to form on the outside. Experienced housewives advise using ordinary folk remedies for washing, rather than expensive store-bought ones. So, a stainless steel kettle can be washed with vinegar, soda, citric acid or activated carbon. Among non-standard ways you can highlight the use of PVA glue and laundry soap, but first things first.

How to wash a stainless steel kettle from fat?

You can use vinegar and baking soda to clean your old kettle. This is a very aggressive mixture, it will remove even the most stubborn dirt. It is necessary to take a container in which the kettle will fit completely. Pour warm water into it so that it completely covers the dirt. Vinegar and soda should be taken in a 1: 1 ratio and added to the liquid, and then put the container on fire, leave to boil for 10-15 minutes. After that, the water should cool down, and you can wipe off all the dirt from the stainless steel, which by this time will effectively dissolve.

Soda in pure form- it is used to wash the iron kettle from fatty residues. Food grade or calcined variety can be used. The kettle needs to be slightly warmed up and then surface treated and interior sponge coated with baking soda. You may need to rinse the sponge several times and reuse the powder to clean it, as old stubborn stains can be difficult to remove this way. A mixture of soda and peroxide, which are taken in a 2: 1 combination, works better in this regard. The resulting composition is rubbed with problem areas and left for 15 minutes, after which it is washed with water.

Citric acid is a proven remedy. To remove not only traces of oil, but also scale, you can pour it inside a stainless steel container and fill it with water, boil for 5-10 minutes. Then pour everything out and dial inside clean water by repeating the procedure. This can effectively remove carbon deposits from the inside.

Activated carbon works great. Several tablets need to be crushed and rubbed with powder on oily areas. After 10 minutes, it is enough to rinse the dishes with water - and everything will shine with cleanliness!

Non-standard cleaning methods

If the standard methods did not help, try the following:

1. The household bar was crushed and mixed with two tablespoons of PVA glue. The resulting gruel is poured with warm water (about 3-4 liters). Then the kettle is boiled in this composition for half an hour, and then washed. This will remove oil stains and rust.
2. Another old method is using cucumber pickle, also suitable for a stainless steel kettle. It must be boiled in brine and rinsed with water after half an hour. Please note that a lot of salt will remain on the surface, which can be removed with any detergent.
3. You can apply mustard powder and leave it on for 20 minutes. Then rinse with water.

How to clean an aluminum kettle from fat?

The difficulty in removing stains and streaks is that aluminum cookware sensitive to abrasives and improperly selected products. But you can use lemon in combination with vinegar. Both funds are taken in equal proportions and added to the water. A medium teapot will need 2 tablespoons of each ingredient. The container must be rubbed with this mixture and left for half an hour, after which all dirt can be easily removed.

Another option is to apply any detergent to the surface and leave it on for 30-60 minutes. Then remove all the dirt from it and rinse the kettle with water.

How to clean the outside of an enamel kettle from the outside?

An enamel teapot is a rather demanding type of cookware; not every product is suitable for removing dirt. For example, baking soda will damage this coating. However, it can also be used by boiling a kettle in a mixture of sodium bicarbonate with water (2 tablespoons per liter). The exposure time is about half an hour. Then everything needs to be cooled and the kettle is wiped on the outside. The dirt should come off easily. For greater effect, add a little detergent to the water. Also, the kettle is boiled first, and then they begin to clean it - the contaminated areas are then wiped off much easier.

One more folk remedy- Toothpaste. It is used to remove small stains of grease. It is better for this to take an old toothbrush and apply the composition to the surface of the dishes with lightly rubbing movements. After that, it remains to rinse it with water and wipe it off. It is better to use a paste without a whitening effect, since there is no fine abrasive in it and it will not damage the surface of the dishes.

You can treat the kettle with a solution based on table salt or boil it in it (2 tablespoons per liter). This will make the oil stains easier to wipe off. But this is possible only for enameled options - such a tool damages steel models.

Citric acid is also suitable for removing grease from an enamel teapot. It is dissolved in water (1-2 tablespoons per liter) and a dirty container is immersed there. All together are boiled for 20-30 minutes, left to cool. After the kettle is taken out and washed with water.

How to remove grease from the glass surface of a teapot?

Very carefully you need to wash glass option... It is unacceptable to use abrasives, as they will leave scratches on the surface of the product. It is best to use household chemicals: Frosch, Cillit, Shumanit in liquid or gel form. It is necessary to apply the products with gloves and only on dirty areas, so that the active substances act on the residual oil, and do not damage the surface. After application, you can leave them for 15-20 minutes and rinse thoroughly with warm, and then cold water... If necessary, you can boil the kettle again if it has been processed not only from the outside, but also from the inside.

It is better to use gloves because household chemicals toxic and irritating to the skin. Also in the future, it is better to keep glassware away from cooking greasy food, as high temperatures may cause cracks from flying splashes of boiling oil.

We clean the electric kettle

The kettle should only be washed after disconnecting from the mains. On many models, you can pull out the cord that attaches to the base.

After washing, the kettle must be dried and only then connected to the cable.

To remove stains from a plastic surface, aggressive methods using soda or citric acid will not work. But on the other hand, if you have any carbonated drink in the fridge, you do not need to run to the store for a cleaning agent. It is better if it is a colorless liquid, as Coca-Cola or Pepsi can stain the light surface of the dishes.

Soda should be used to treat greasy stains and leave for 30-60 minutes. Then rinse everything off with water, wiping off the dirt with a sponge. You can also descale this drink by pouring soda into a kettle and boiling it. The cleansing effect is achieved by the presence of acids in the composition of such water.

You can also wipe the electric kettle with lemon. It will lighten yellow spots and help remove grease.

You can use products in the form of powder, tablets or granules (for example, Anti-scale from the Sanita brand). They cope with tougher deposits on surfaces.

Many housewives use apple peelings by adding them to boiling water. But this method will remove only weak stains, and old oily residues will remain in place.

If the milk is sour in the house, do not pour it out, because it is an excellent tool for removing fat. It will fit an electric kettle or stainless steel. Sour milk should be rubbed over the surface and left for half an hour.

Preventive cleaning of the kettle once a month will get rid of greasy stains that are difficult to remove later. But even if they did appear, now you know what to do.

Stainless steel kettles heat up quickly and are not subject to oxide and rust formation. But they have a significant drawback - internal and outer surfaces utensils made of this metal quickly become dirty. Scale builds up inside the container over time, and the outer walls are covered with soot and splashes of fat. You can get rid of these contaminants at home using ready-made chemical compositions or various improvised means.

Show all

Cleaning outside

To clean a stainless steel kettle from dirt on the outer walls, simple and safe methods are used. Whichever means is chosen, it is important to carefully and without pressure process the metal surface - if there are scratches on it, it will get dirty even faster.

How to remove tar from clothes and shoes from shoes at home - 7 proven remedies

Soda

In this way, you can clean the stainless steel kettle and enamelware. To achieve better result, it is recommended to heat it up immediately before cleaning: pour water and keep it on fire for several minutes.

After that:

1. 1. Place the cookware on a flat surface.
2. 2. Moisten a sponge with water and sprinkle with baking soda.
3. 3. Treat contaminated surfaces.
4. 4. Wash off the remaining cleaning agent with warm water.
5. 5. Rinse outside and inside.

This method is also suitable for cleaning an electric kettle, but it is important to be careful not to let water get inside the appliance.

Another method using a soda solution is not suitable for an electric kettle, they can clean the dishes from the outside of grease:

• water is collected in a spacious container;
• heat it up and dissolve the soda (put a tablespoon of powder for each liter);
• immersed in warm solution dishes;
• boil for half an hour;
• after removing from heat, leave to cool;
• remove the softened fat with a sponge or rag;
• rinse and wipe dry.

If the contamination is strong, then add a couple of teaspoons of dishwashing gel to the solution.



Soap

Laundry soap can be used to remove small dirt on electric kettle... To do this, lather a sponge and wipe the outer surfaces of the device with it. Rub the contaminated places with little effort. Afterwards, remove the remaining foam with a clean damp cloth, wipe dry with a paper towel.

If you use this method regularly (once a week), you can prevent the formation of heavy dirt.



Toothpaste

You can clean the metal kettle to a shine using toothpaste. For this you need:

1. 1. Squeeze a small amount of paste out of the tube onto a dishwashing sponge.
2. 2. Carefully, without strong pressure, treat the stained surfaces.
3. 3. Place the dishes under a stream of warm water, then rinse with cold water.
4. 4. Wipe dry with a tissue.
5. 5. Fill the kettle with water, put on fire and heat slightly.
6. 6. Remove from the plate, polish the outer surfaces with a piece of soft cloth.

In case of heavy dirt, after applying the paste, leave it on the walls of the dishes for a few minutes and wait. Then rub with a little effort with a sponge.

For cleaning, you cannot use a paste with a whitening effect - the abrasives contained in it can damage the metal surface.

Vinegar

You can also remove dirt with a soda-vinegar solution. To do this, you will need a spacious container in which you can completely immerse the kettle.

Procedure:

• water is collected in the pan, 3 tablespoons of vinegar and soda are added;
• immerse a kettle in the solution;
• boil for several minutes;
• remove from heat, leave to cool;
• wipe with a clean damp cloth and wipe dry with a napkin.

Laundry soap + soda + glue

If the kettle burns out, you can get rid of the burning by boiling it in soapy water. For greater efficiency, silicate glue should be added to it.

Water is collected in a spacious container, 100 g of laundry soap and soda grated on a coarse grater are added to it, 80 g of glue is poured. Dip a kettle in the solution, boil for a quarter of an hour. Then the gas is turned off and left to cool completely. They clean the surfaces with a sponge, rinse.

Activated carbon

Return former appearance a burnt teapot can be used with charcoal. Several tablets are crushed with a spoon, the resulting powder is rubbed on the dirty walls of the dishes. Leave for 10 minutes, then rinse off.

Household chemicals

In particular difficult cases use cleaning compounds "Shumanit", "Silit" or "Sif". They will quickly remove even old carbon deposits... They should be used carefully, making sure that the agent does not get inside the kettle, and after washing, rinse the dishes thoroughly, boil clean water twice and pour it out.

In the process of cleaning, it is imperative to wear rubber gloves so as not to damage the skin of the hands with aggressive compounds.

Washing inside

Plaque formed on interior surfaces the kettle should be cleaned regularly - at least once a month. If the water is very hard, then this should be done twice as often.

To remove scale, acids are used: citric acid, vinegar, sour milk and fruit peel decoction.

Lemon acid

The simplest and universal way- the use of citric acid. This remedy will help get rid of plaque in a kettle and an electric kettle.

Procedure:

• the dishes are filled with water by two-thirds;
• add acid (for each liter, a tablespoon of powder);
• boil for several minutes (the thicker the layer, the longer it takes);
• leave to cool completely;
• drain the solution, wipe the walls with a sponge;
• if plaque remains, repeat the procedure.

Lemon

You can use fresh fruit instead of dry acid. For this:

1. 1. Cut the citrus into small slices.
2. 2. Pour two-thirds of water into the kettle.
3. 3. Put chopped lemon into the water.
4. 4. Turn on the electrical appliance, ordinary kettle put on fire.
5. 5. Boil for half an hour, then let cool.
6. 6. Drain the water, wipe the walls with a sponge.

If the contamination has not left the first time, repeat all the steps anew.

Vinegar

This method can only be used for cleaning a simple kettle, it is not suitable for an electric one.

Procedure:

1. 1. Fill the dish with water two thirds.
2. 2. Add vinegar (for each liter of water, 100 ml).
3. 3. Boil for a while (it may take half an hour to remove thick deposits).
4. 4. After removing from heat, leave for an hour.
5. 5. Drain the cooled water, wipe with a sponge.
6. 6. Collect clean water, boil and drain. Do this 2 times to get rid of the vinegar smell.

With this method, you can remove the thickest and old layer scale.

Coca Cola

The carbonated drink contains phosphoric acid, which helps in removing plaque. It has a weak effect, and several boils may be required to combat moderate scale. Coca-Cola is not suitable for serious contamination. Can be used for conventional and electric kettles.