O the role that the dining table plays in the country can be said a lot and for a long time: it is simply necessary. Indeed, without this piece of furniture, dinner turns into a banal "meal", and friends who have come to rest are simply impossible to receive with dignity. As always, there are two options for solving the problem: you can buy garden furniture, Can i make a good dining wooden table do it yourself. In the first case, you can buy plastic strawberries for harmony, and in the second, you can proudly demonstrate your own creation by exposing everything that is grown in the garden to it.

Content
1.
1.1
1.2
1.3
1.4
2.
2.1
2.2
2.3

Making a wooden table with your own hands

As the most simple option you can see a wooden table with your own hands, 75 cm high, 120 cm long and 70 centimeters wide from a planed edged boards 40x140 mm or from a floor strip suitable size, for example, 36x135 mm.

Materials and tools needed to make a wooden table with your own hands

You will also need:

Two bars with a section of 40x60 mm and a length of 70 centimeters.
Self-tapping screws,
furniture screws (4 pieces) 100 mm long, with a flat head with a diameter of 8 - 10 mm.

From the tool it is enough to have:

Electric jigsaw (hacksaw),
plane,
chisel,
grinder or a block with a fixed on it sandpaper,
screwdriver,
set of drills.

Do-it-yourself wooden tabletop

Let's consider how to make a wooden table with your own hands in more detail. The table top is assembled from five boards, cut to size, which are attached to the bars with self-tapping screws.

The length of the self-tapping screws should be chosen in such a way that they securely fasten the tabletop board to the bar and do not come out on its surface. If you use a tongue-and-groove board, then the table top is going to be solid, and it is better to remove the tongue from the extreme board with a jigsaw and stitch the side.

When using a planed board, you can leave a gap of 3 - 4 mm between them when assembling the tabletop, which will not interfere with using the table, but will facilitate maintenance and prevent dirt from accumulating at the place where the boards that make up the tabletop meet. It is easy to ensure the identity of all the gaps: when assembling the tabletop, it is enough to lay a strip of the required width between the boards. You can use a metal corner for this.

Diy table legs

Table legs are made of the same material as the table top, while two parts of one leg are connected "in half a tree". You can mark the boards for making "legs" as follows.

The table is the second item after the stool that every novice amateur furniture maker should be able to do. The table can be created from different materials and possess unique characteristics... It is a great intention for you to want to make your own piece of wood.

A table made of wood is quite easy to create with your own hands, it is enough to have minimal skills in working with carpentry tools. And the cost of the material will be significantly less than the cost of a table using metal, glass or plastic.

A piece of furniture made by your own hands will correspond as closely as possible to the desires of a happy owner, and it will delight the eye incomparably more than what was acquired. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.

What can make a good table

A particularly beautiful tabletop can be made of cheap non-varietal pine boards, knotty and twisted (without falling out knots, rot, fungus, wormholes), which, when well processed, give a wonderful pattern, to achieve which, when working with an expensive tree, you need to make much greater costs and efforts ...

When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.

Soft (spruce, pine, chestnut, dogwood) is easily damaged during operation, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.

Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are difficult to handle on their own. And you may have to look for masters to work with them. But provide the product with durability.

External characteristics

It is very important to determine in advance for yourself the appearance of your future product. The basic rule good table it is considered if the structure fits well into the space allotted for it and leaves a lot of free space for those sitting.

It is also important to consider that a table with a rectangular top will accommodate fewer people than a table with a round or oval shape with the same area. And the table for guests will be more expedient to be made in a folding version, which is expanded for big holidays, but in everyday life it is folded. Also, such a folding table will be convenient in the backyard.

Most often you need to choose kitchen table... It should be roomy and pleasing to the eye, to facilitate the process of working with him. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.

Based on this, it is absolutely clear that the size of the table is chosen depending on the area of ​​the room. Also, soft wood cannot be used for the kitchen table due to its use in "extreme" conditions.

Choice external characteristics products are a responsible process, therefore, before starting to form a table for a summer residence with your own hand, it is imperative to carefully assess the needs for which this table is being made.

Transferring ideas to paper

When creating a structure that is the fruit of your imagination, you will have to develop a diagram and drawings of your table with your own hands. For which there is a huge variety of electronic programs.

After a thorough development process, it is imperative to transfer the result to paper. For fast and quality work, it is very important to use this manual constantly.

Creative process

Preparation of drawings is the last preparatory stage... Then you can start the most important part of the work - the manufacture of parts. Do-it-yourself wooden tables are much easier to create if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.

You can do it yourself personally as desk and magazine or children's option... With a certain skill, it is really possible to create and computer desk... And also a dining or country model. Each of the options is fairly easy to implement.

The canvas for the countertop and the board with the beams, from which the rest of the parts will be formed, are processed with an available tool or, at worst, with coarse-grained sandpaper to remove the defects present in the form of irregularities and protruding knots.

Boards are sanded from all sides, including side edges and corners. If you are creating a canvas from wood cuts, you need to make sure that they are dry enough, and also repair small cracks found after visual inspection. And it is better to groove them. To get a more reliable web adhesion and save time for assembling elements.

Transfer the scheme to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are ground. The protruding support elements are trimmed by about 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).

The workpieces are covered with a preparation that prevents moisture and pests from entering, and only after final drying is it allowed to resume the process of creating the table with your own hands.

Putting the details together

After making all the necessary parts, you can proceed to the sacred service. Namely, to put the desired masterpiece together. And it could be like round table or any other selected product.

First, it is necessary to assemble the support structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, in otherwise there is a chance of splitting the part). For the connection, you can use galvanized screws, since they do not rust, and this is very important for wood products. Or wood glue.

According to the basic rules, the frame in length and width should be 30-25 cm less than the countertop.

On the sides, you need to attach additional boards to give rigidity and to hide the place where the legs are attached. Cut off the chamfers in the places where the legs are installed.

Then the table leg is fixed in place with clamps, and bolt holes are drilled in the frame. Place the supporting elements in their places and fix them with stoppers. Reinforce the structure with wood glue. Then set the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden by caps in the color of the wood.

The final stage. Finishing

A photo of the completed table can be seen below. This is surprisingly easy to achieve. Optionally, you can round either only the corners or completely the butt, depending on the type of table. It will be nice to make chamfers on the edges of the countertop.

In the entire structure, irregularities are sanded, with the help of putty, mistakes are hidden. To extend the service life of a self-assembled table, it is necessary to cover it with several layers of varnish or stain.

Thus, do it yourself beautiful table made of wood is a fairly simple leisure activity. And easy to do. The guarantee of extracting a solid, ideal in size and aesthetic result according to its drawings is: exact adherence to the manual, error-free execution and weighed selected material. And the resulting table will harmoniously fit into the exterior.

Photo of tables with your own hands

From the abundance of furniture on offer, wooden tables and chairs remain popular everywhere. Natural materials ensure environmental friendliness, safety and durability of the models. Solid wood furniture can be found in any country house, apartment or office.

Alternatively, you can make your own wooden furniture.

Wooden kitchen tables

Before buying a table, there are a few things to consider. It is on them that the comfort and mood of household members in the kitchen depend.

Ergonomics

Due to the fact that in small apartments usually there are small kitchens, do not forget about ergonomics. First of all, when choosing a wooden dining table, one should take into account the comfort of being near the kitchen pieces of furniture.

It is not comfortable when you rest your elbows or legs on a neighbor or on the legs of the table. In addition, there should be optimal distance from the table to other pieces of furniture. The table should be approximately 80 cm away from walls and other items in the kitchen.

The height of the table also plays an important role. It should be selected depending on the height of the persons sitting behind him. Low (70-74 cm) tables are recommended for short people. Those with a height of 1.6 m to 1.7 m should buy tables with standard sizes(75-76 cm).

Tabletop appearance

Before choosing a countertop design, you need to calculate how many people usually need to be placed behind it. The shapes are found: oval, round and rectangular and square.

Tables that lack corners should be placed in spacious kitchens. Tables with the shape of a square or rectangle fit perfectly into small rooms. You should see if the appearance of the table matches the overall interior.

Practicality

There are many models that carry additional functionality, namely, replace the cabinet, can be folded and unfolded if necessary.

A wooden extendable table is an excellent solution for those owners who suffer from a lack of space in the dining room.

Like any furniture, these products have a number of positive and negative qualities. Wooden kitchen tables have the following advantages:

• uniqueness and originality of wood texture, which cannot be recreated;
• the ability to withstand shocks and daily use for a long time;
• environmental safety, thanks to a natural material that does not contain glue and does not emit harmful substances in atmosphere.

The negative characteristics include: high cost, vulnerability to moisture and dampness. At elevated temperatures, the material can dry out, thereby creating cracks and loosening the table. Over time, the surface may darken or be attacked by pests.

Wood table in the living room

Recently, it has become fashionable to decorate living quarters in white colors. A combination of white furniture and light decoration of walls and windows is actively used. Dark and White color can also be combined in furniture.

For example, the table top might be white, while the legs and edge of the table might be dark. Such furniture is often used when decorating a room in a minimalist style. In a spacious living room or studio, a white wooden table is a great solution.

The glass-wood table is often placed in front of the sofa, it is small in size and is used as a fashionable piece of furniture in the room. It is intended: for drinking tea in front of the TV, storing books and magazines, as well as for working in front of a laptop.

Solid wood table in the country

On personal plot the most important place for gathering loved ones and guests is a gazebo or outdoor space.

In nature, it is drawn to everything natural, so a wooden table for a summer residence is a combination of beauty and practicality in one object. In addition, this piece of furniture goes well with the general rustic style.

Tables made of wood for a summer cottage must be not only durable, but also moisture resistant. If the table will often be exposed to moisture, you should choose a product made of larch.

Country tables should have the property of not deteriorating under the scorching sun. Due to its density, the best material for a country table, a walnut or oak is considered. This wood is considered hard and expressive. To resist pests, the oak is stained, that is, it is kept in water for some time. Such material is more expensive than its counterparts.

You can save money if you choose a table from conifers wood. They have lightness, pleasant color, smell and moisture resistance. Increased content resists water absorption.

How to make a wooden table yourself?

Some summer residents make tables themselves. Creativity and hard work will save money and create a unique item on your summer cottage... Making a wooden table with your own hands is not at all difficult. It is enough to have in your arsenal necessary materials, tools and a little time.

Tools and materials required for manufacturing:

• plane;
• sander or paper;
• screwdriver with a set of bits;
• jigsaw or saw;
• chisel;
• means for staining and varnishing;
• metal corners;
• yardstick;
• building level;
• accessories for fastening (screws, bolts, self-tapping screws);
• boards 40 or 50 mm thick;
• 4 bars for wooden table legs measuring 50x50 mm;
• auxiliary boards 40 mm thick for fixing the table top.

Procedure (step by step instructions)

• Decide on the dimensions of the future homemade product. For table lengths greater than standard values, at least four racks must be installed.
• Pre-cut the boards for the worktop and cut them to the required size.
• Place five boards in parallel, fasten them from below with self-tapping screws to the auxiliary transverse boards. Leave room for the table legs.
• Install the leg blocks using metal corners and secure them to the table top.
• To prevent distortion and stability of the legs, skip the perimeter planks under the table top. If the table has more than four legs, an additional cross bar must be reinforced in the middle.
• Sand the edges of the worktop from all sides with a sanding paper.
• Cover the product with pest repellent (stain) and, if desired, apply a layer of varnish.

There are many ways to create a table with your own hands. The final version of our homemade wooden table can be seen in the photo.

Wooden tables for babies

When a young child grows up and begins to sit independently, it is time to feed him with various complementary foods.

The wooden feeding table is the most good option furniture designed for a comfortable meal. Tables are usually made in conjunction with chairs and have a common design.

There are several types of chairs for children:

• transforming chairs
• high chairs with an adjustable back.

In the first case, the seat height is adjusted for the intended purpose. The child can not only eat at the table, but also play if removed folding table made of wood and lower the seat.

In the second case, the adjustable seat height allows you to raise the baby higher or lower it to a safe distance to the floor. Even in the event of an unsuccessful maneuver, the child will not be able to harm himself and will allow the mother to do her daily activities in the kitchen.

Buying wooden tables for feeding, parents do not have to worry about the health of the child - he will not have allergic reactions. Therefore, natural wood material is most often used for the manufacture of children's furniture.

When buying a table, you should pay attention to sharp corners that can cause unwanted damage to his little owner.

Finally, I would like to say that thanks to wooden furniture there are many opportunities to equip a home under different design... Especially popular country style using natural materials and copying the semi-antique interior.

Security and own health directly depends on the type of materials that are in your home.

Another important fact is that wood is such a material that you can work with without using complex tools and equipment. Thus, any man is able to create beautiful things on his own for reasonable money.

Photo of a wooden table

A piece of furniture such as a kitchen (or as it is also called a dining table) is the main component kitchen interior... Its shape, size should correspond to the size of the room, so that all family members can freely accommodate behind it. It is also important that the kitchen table does not interfere with free passage.

Extendable convertible dining kitchen table

Currently presented in stores wide choose kitchen furniture, of various shapes and a size made from a variety of materials. There are tables of both Russian and foreign production on the market.

Original round dining table with chairs in the interior of the kitchen

When choosing a table for a small kitchen, you have to make a choice - you like it when there is a lot of free space, or it is important for you that the furniture is comfortable and spacious. If you can't decide on the right table for the kitchen, try making it yourself. Those who have a certain skill can do it quite well.

DIY wooden round table with a structure on four legs

DIY folding table for a small kitchen

Many men who like DIY craft can save a lot. family budget, after all finished goods are not cheap. Accordingly, you independently select the material for manufacturing dining table high quality and the necessary fastening. By showing your design skills, you will collect original item furniture, ideally suited to the kitchen interior.

Folding table for the kitchen, which does not take up extra space

Don't feel that this is a difficult task. It doesn't take much time to assemble the dining table - just a few days. It is a little more difficult to make the countertop. It is better to first consult with friends involved in such matters, or read information on the Internet.

Do-it-yourself table with shelves and a reclining tabletop

Collecting the table with your own hands, you will create a unique thing, bring to life an old idea. Maybe with your light hand, organize the production of kitchen tables, and it will grow into a profitable business.

Deciding on the design and construction

Hand painted round wooden table

Square wood table for dining area

The design and shape of the dining table can be very diverse. Designers, using imagination, bring to life the most unusual ideas.

Oval extendable dining table with chrome legs

Consider the construction of this piece of furniture.

Round table	It has smooth lines, as if uniting those who are sitting at such a table. Has several legs or one large one. It is comfortable to sit behind him, you will not have an association related to the place of work or study. There is one drawback - it cannot be placed tightly against the wall.
Oval	An excellent option for owners of a large kitchen, which is divided into a work and dining area. The perfect choice for a large family, strong enough
Square	The embodiment of rigor, but at the same time, it is simple and multifunctional. Suitable for small spaces, space saving well
Rectangular	Widespread option. Many people can be accommodated behind it. It is placed as you like - in the center, against the wall, by the window
Triangular	Such a table is quite rare in the kitchen. It is used as an unusual decoration element, for example, as a coffee table.

Wooden kitchen furniture set: rectangular table, bench and corner

Glass corner dining table

Owners small kitchen prefer to use a folding table or a sliding table. Since they are assembled, they significantly save space. Other forms of tables are few and far between. If you prefer products of the original form, it is better to make them to order.

Large classic dining table made of solid wood

The kitchen table, like any other furniture, is selected for a specific style of interior. For example, a regular wooden table would be perfect for a classic. High-tech is characterized by right angles and lines, so tables made of plastic, metal, glass are chosen, with an emphasis on white and gray shades... For Art Nouveau style is used unusual furniture with ornate lines. Eco-style means products made from natural materials.

Original high-tech folding dining table

Designer advice. Whichever table you choose, the main thing is that it matches the interior and complements the overall look.

Necessary materials

Dining table materials vary. Here are the most used ones:

• Chipboard;
• glued, edged board;
• timber.

You can combine them if desired. You will also need: corners, hinges (for folding models), rollers, confirmations, corner fasteners, eccentric bolts, pads, tape for edge decoration, a plastic profile for the countertop, plugs.

Required tools

Not to do without standard set tools:

• jigsaw;
• drill;
• hacksaw;
• screwdriver;
• drill;
• screwdrivers;
• electric planer;
• grinding machine;
• hexagons;
• building hair dryer (can be replaced with an iron);
• tape measure (ruler), pencil.

When making complex models, you cannot do without additional tools.

Manufacturing process: step by step instructions

We will make the tabletop from wooden boards

How to make a kitchen table with your own hands? Let's take a look at a typical dining table as an example. First of all, we prepare the tools and materials that will be needed for work.

Scheme of the future dining table with dimensions

Then we mark up the pieces of furniture. We start with the table top, as this is the largest part of the table. It can be rectangular, round, square or oval in shape. If you are thinking of making a table of an unusual shape, draw the markings according to sketches.

We grind the boards with a plane, carefully process the edges so that the boards fit as tightly as possible to each other

We connect the boards with glue and dowels, remove excess glue on the surface and grind it

Then we apply a drawing of the side racks to the material - these will be the legs of the future table. Most often they imitate a chess piece in shape. If you want, you can make another shape at your discretion. The main thing is that the structure is stable.

We fasten the legs and make the base for the table top

Then we mark the upper and lower crossbars, which will connect the racks and thereby ensure the reliability of the structure. Remember that the bottom bar is almost twice as wide as the top bar. Its shape is varied. Usually, the legs are located at a distance of 15-20 cm from the edge of the table surface.

At the next stage of work, we cut out the elements. We place the material on the table. Cut out the countertop using a jigsaw. To avoid the appearance of chips, we put plywood under the bottom. Cut out the remaining parts in the same way. Do not allow material to sag. This may cause the tool to break or break off the cutout element. At the end of cutting the edges of the parts, we grind with a special machine or we go over them with sandpaper.

We attach the legs to the long cross-beams and drill holes in them in order to later install the tabletop

Using tape to decorate the edges and plastic profile, we make facing. First, we put the profile on the edge of the surface. In the place of the corner bend, the profile must be heated with a hairdryer and then turned. For high-quality fastening use an all-purpose adhesive.

After the glue in the frame dries up, you can start installing the tabletop on the frame.

Then we trim the legs and crossbars using tape to decorate the edges. Before that, we prepare the surface by cleaning it from dirt and grease. Press the tape to the edge with a hot iron and glue it. Cut off the excess with a sharp knife. The resulting irregularities are carefully removed with sandpaper. We process the edges of the rest of the elements in the same way.

If you want to make the table longer and wider, then you need to strengthen it with two additional cross bars

We assemble the table in the following order. Using confirmations, we connect the legs to the crossbars, positioning the upper one so as to prevent the table top from bending. We fasten the lower one at a height of 20-25 cm from the floor.

Ready assembled table it remains only to treat it with varnish or stain or paint it, having previously primed

We put the countertop on the finished base, fix it on the corners. We attach onlay legs to the racks. We decorate furniture screws with caps. That's it, the dining table is ready!

Ready universal option- table top and legs are stained

You can paint the legs white, and cover the table top with stain to get an unusual design.

Of course, today everyone has the opportunity to buy any furniture in the store, including a table. But why not make it yourself, with your own hands?

This is not as difficult as it might seem at first glance. In addition, you have the opportunity to make a table that will ideally fit in size and outward appearance to the interior of your kitchen or other room.

In addition, do-it-yourself furniture is not only money saving, but also some kind of one, but a reason for pride, since nowadays not every man knows how to make something.

What are the tables

If you decide from the boards with your own hands, then you need to figure out what types of tables there are, and decide what exactly you need.

The simplest is a regular table with four legs, a table top and a frame. It will not be difficult to make it even for someone who is not experienced in woodworking.

If you are experienced enough in this matter, then you can make the dining table round or oval, decorate it with carvings, painting or burn patterns and patterns on the surface.

More difficult option is from the boards. In fact, this is the same ordinary table, but rather thick and long crossbars are attached to its legs, on which the seat boards are laid on top. This gives us a table with benches on both sides. Such furniture is well suited both for the kitchen and for installation in the courtyard of a private house or summer cottage.

If in the room free place there is only in the corner - make a corner table that fits perfectly into this unoccupied space. It may not be so convenient to dine at it as at a classic table, but you can put a TV, microwave or kettle on it - there will be enough space.

Another interesting option can become a table-sill.

In fact, this is the same window sill, but significantly expanded and adapted, for example, for a comfortable workplace for the student.

The advantage of this solution is that the table will be well lit most of the day.

There is also a minus: sitting at such a table in winter, you will have to rest your feet on a very warm, even hot radiator, which is not very convenient.

Materials and tools

Buying everything you need to make a table with your own hands is quite simple and will not be difficult or costly. The main material for the dining table is wood, or rather:

• Planks 25 to 50 millimeters thick, 100–150 millimeters wide, rather long.
  The thicker the material for the table top, frame and legs, the heavier, but also more durable they will be.
  Choose boards from good tree, without any defects.
• Bar. It is necessary for making table legs, so choose thick and sturdy samples. The timber can be replaced with the same planks by positioning them with the letter "G", or using commercially available aluminum table legs. You can also use balusters as legs (curly carved wooden posts that support the railing on some stairs).
• Chipboard or plywood sheets, which can be used as materials for countertops. Choose specimens that are thick and sturdy enough to withstand daily stress.

As with materials, and DIY tools and fasteners are easy to get, they are in most homes. If something is missing, you can buy it at the nearest hardware store.

• pencil, corner, roulette and a ruler;
• jigsaw or hacksaw on wood;
• screwdriver with a set of attachments and drills;
• plane, if it is necessary to pre-process the boards from irregularities and defects;
• kit self-tapping screws, furniture bolts and nuts;
• sandpaper or Sander;
• varnish or stain, roller or tassel for processing the finished table.

Attention! When working with the jigsaw, always remember the safety rules and do not allow small children or pets to be near!

Simple kitchen table made of boards

First, we need to make a tabletop.
There are several options here:

• Cut a piece of the desired size from a sheet of chipboard or plywood using a jigsaw;
• Stack a few is enough wide boards and subsequently fix them on the frame;
• Take a large number of relatively narrow boards, place them side up and glue together with wood glue.
  The end result is a fairly thick, heavy and sturdy tabletop.

Stages of work

Step 1. We collect from boards countertop.

Step 2. We make a frame from boards or their wooden blocks. In size, it can be made equal to the table top or with a slight indent, about 2–2.5 centimeters on each side of the table. Having fastened the parts of the frame with screws, connect the frame with the tabletop with them.

Step 3. After we with put the frame and the tabletop together, half of the table is already ready. It remains only to make his legs. If a timber is used for this, drill two holes for the furniture bolts in it. Moreover, they can be made both on one side, one above the other, and on two different sides for a more reliable attachment to the frame.

Important! Carefully check the length of the table legs, they should not differ from each other. Otherwise, the table will be uneven and wobble. If you do not want it not to spoil the floor material, attach rubber “shoes” to the lower part of the legs.

Then make similar holes in the table frame and fasten the legs and frame with bolts and nuts. Also, the legs can be fixed from above using screws, but over time, such fastening may weaken.

If you want to make table legs out of planks, fold two planks each with the letter "L" on the outer or inner corner frames and fix them using all the same furniture bolts or screws.

To prevent the legs from loosening, connect the folded boards to each other in the lower and middle parts using screws or nails.

That's it, simple and reliable, DIY, ready!

Advice: Before proceeding, do the simplest drawing, preferably from several sides. Check the dimensions of the parts constantly. Some parts of the same size can be cut at the same time if you fix the boards or timber with clamps.

Pallet table

Wooden pallets widely used in shops and warehouses as pallets for goods.

If you wish, you can get several pieces for free and use them as a basis for making an original and unusual kitchen table.

If at least one side of the pallet surface is solid, then you no longer need to make a tabletop, it is ready.

You just need to process it and, if desired, round the corners.

Note! Since the pallets are originally intended for warehouses, no one is involved in grinding and cleaning them. Therefore, before you knock a table out of them, carefully sand them and remove all burrs. Unevenness and defects of the boards can be hidden with putty.

Stages of work

Step 1. Most pallets are open and there is a large enough space between the boards. distance, because of which to use the surface of the pallet as countertop not very convenient. There are two ways to solve this problem: either make boards appropriate size and anchor their screws between the pallet boards, or install a sheet on top plywood or chipboard.

Step 2. As for the usual table, table legs from pallets can be made from timber or boards. The best thing to fasten them with thick enough and strong pallet timber with nails, screws or furniture bolts.

To prevent the legs from loosening, connect them with crossbars.