For several years, most people have selected staining as finishing ceilings. It should be noted that this is a time-consuming, one can say, "jewelry" stage of work. After all, as a result, it is necessary to get a smooth surface, without strips, divorces and bubbles. Among the coloring materials, preference is more often given by the "budgetary" option, that is, the water-making paint. It is not toxic, it is easy to apply to the surface of the ceiling. At the same time, most people have a question: how to paint the ceiling with water-based paint without divorce?

So that the painted surface pleases with impeccable view and color, instructions should be followed by the preparation of the ceiling to paint. Purchase the necessary tools for work. When selecting a color scheme, pay attention to the properties and composition of the coloring material.

Ensure to prepare the surface. On this, it would seem that the simplest stage, there are subtleties. It all depends on what state is the ceiling: bites, painted or leveled by plasterboard. So that when painting did not remain flawed, you should remember the basic rules of surface preparation:

• If there is a whitewash on the ceiling, it must be removed. To remove the spam layer, take a wet cloth and detergent, it must be washed. This will make it possible to clean the ceiling from dust. When the surface is driving, put the spatula to putty on cracks and small potholes. To smooth out irregularities take advantage emery paper. Now the ceiling must be applied to the ceiling. If the surface requires complete alignment, apply a layer of finishing putty on it and let's dry. Final stage Beginning the ceiling.

• You should not paint the ceiling if there is an old painting on it. After painting the ceiling remains flaws: old layer Swimmed or paint slices with a ceiling. Remove the finish from the surface can be a sharp spatula or special solvent. After that, it is necessary to treat the surface with putty and primer, as described in the first version.

• If the ceiling was aligned with plasterboard, first it is necessary to handle the seams and places of fastening with putty, to be primed, to dry. After apply two more layers of putty on the entire surface, pollut the sandpaper. Do not forget that the last layer is applied primer. It will help the paint tightly and evenly connect with the surface.

Ceiling paint selection

Before buying water-level paint, you should familiarize yourself with its composition, read the instructions for use, compare color gamut With the overall style of the room in which staining will be held. All the necessary information is on the label of banks. It is indicated here: for what works are paint, how much time it will dry, at what temperature it is necessary to apply material, durability, etc.

You can also paint the ceiling of silicone or acrylic paint.

Of course, such dyes are an order of magnitude more expensive. But with their help it is easier to achieve a flat surface, which will delight you and those around for many years.

Necessary materials and tools

If you know how to paint the ceiling without divorce, prepared the surface, then proceed to the purchase of materials and tools that are needed during the work. In order not to forget anything, make up two list. In one, you write down what tools you have in the presence, and in the second that you need to purchase.

So you will need:

• sponges, rags;
• water, detergent;
• paint removal means;
• spatulas of different sizes;
• sandpaper;
• putty;
• primer;
• reinforcing mesh;
• water-emulsion paint;
• tray under paint;
• garbage bags;
• painty pussy different thickness and forms;
• rollers of different widths;
• malyary Scotch;
• ladder;
• construction gloves, respirator, goggles, headdress, overalls.

Technology Painting

If you are a beginner master repair work, feel free to seek advice from professionals. Learn how to paint the ceiling with water-level paint without divorce. Make yourself a phased action plan, so you correctly perform staining and get the desired result.

We will start work. Before applying paint, mix the long wooden stickSo that its consistency is uniform. Plastic or metal object For stirring, it is not desirable that the paint does not enter with these materials into the oxidation reaction. If you need to add coloring pigment, so you get the desired shade.

How to paint the surface? More convenient to make roller. In corners or near ceiling plinth You can neatly cry out the thin brush. Pour into the tray a small amount of coloring makeup, if you make a brush or roller directly into the jar, the paint change your color.

How to boil the ceiling with water-based paint without divorce? So that in the process of staining on the ceiling there are no small touches from the pile of roller, moisten it completely into the water-emulsion paint, so there should be a divorce.

Painting the ceiling begins with the corners of a thin brush, also do not forget about places near the plinths. After the ceiling perimeter is painted, proceed to the general painting. The smears should be applied in one direction evenly, from the far from the angle window. Strips must fit to each other so that there are no cracks and divorces on the ceiling after painting. If there is no windows in the room (bath, toilet, corridor) to start painting from an angle opposite the front door.

Before starting work, jump out fur rollers hot water, then the pile will not fall out. If the paint of a foreign manufacturer, paint the ceiling is needed in two layers so that the color is more saturated. Domestic dye should be applied in three layers. Each painting must be performed in one stage.

Ask, for example, why can not be divided into a large surface in the living room into several sections? The answer is very simple: if one part dry, and you will start painting another, there will be no overall integrity of the ceiling, butts and transitions will remain. Externally it will seem that the surface is painted inactively and unevenly. Make a small backstage between stripes, about 5 cm. This will avoid divorces.

Before painting the ceiling for the second time, wait for the first drying of the first layer. It is better to apply the paint on the second day, it will avoid bubbles. Optionally, you can apply the third layer of paint, while it should be divorced by water. As a result, the surface will be smooth, and the paint does not take a thick ball or stripes.

Bring out the third stage of staining is better two days after the complete drying of the second layer. To remove excess water-free paint from the ceiling, go through the surface with a dry roller. Its soft texture will absorb excess paint.

On video: Painting the ceiling.

Performing repair independently not enough to know how to boil the ceiling with water-resistant paint without divorces, one should also take into account one important stage, how to dry paint material on a surface. To do this, close the windows and the door in the room are desirable for 12 hours to avoid drafts. Such a procedure allows the surface to remain smooth and without bubbles. Drying technology should be observed after each staining layer.

As you can see, there is nothing complicated, all that is necessary is to comply with the above stages of work and then you will not have a question "How to paint the ceiling without divorces." Invite friends to your assistants and work "boils" faster. Dare, and you will succeed.

Proper Ceiling Painting (1 video)

To paint the ceiling with water-level paint without divorces, you need to know some nuances and rules. An important is the choice of materials and tools.

Today, paints are widely used for finishing the ceiling in apartments. The popularity of such material is that it is highly resistant to the action of external factors. The colored ceiling is easily humid cleaning. Painting the ceiling is also easy as the whitewashes. Today we will look at how to paint or how to paint the ceiling with water-level paint without divorce.

Before you begin direct finishing, you need to select the material. When it is elected, it is worth paying attention to the microclimate of the room in which it will be used. This will create a durable and durable coating.

The most common option is the waterproof paints. They are best suited for finishing residential rooms. The reason for such popularity is that water is used as a solvent here. This means that, when painting and drying the coating in the air, harmful pairs will not be highlighted. Also, the waterproof paints dry very quickly. So, the surface will be ready after day after staining.

As for the choice, today in the market you can find several types of water-level paint:

• Silicate. The basis is silicate glue. Have low cost and are ideal for dyeing rawrooms. The only drawback is instability to abrasion. The finish is not adapted to clean water.
• . Compared with the previous material, they have a higher resistance to abrasion. But, they are not adapted to water purification. Finishing coating poorly opposed high humidity. So, even water splashes can leave traces that disturb the aesthetics of the coating.
• Mineral. The substance contains cement or lime. Often used to finish brick and concrete structures. The only drawback is short-life. The coating will need to be periodically updated.
• Acrylic. The substance based on acrylic resins is very resistant to abrasion, as well as temperature drops and high humidity. Therefore, experts recommend using this option for finishing the ceiling in places such as a bathroom and kitchen.
• Silicone. Paint based on silicone resin. With it, you can hide small cracks. Perfect for wet premises. Easily applied and has high resistance to negative factors. ambient. The only drawback is a high cost.

As can be seen, today the market presents a wide range of such finishing material. Therefore, you need to come to choose very carefully.

Choose tool

High-quality staining implies uniform paint to the design. And to do this, you need to choose the right tool. So, what tools will be needed for staining:

• Wide roller. It is best to stop the choice on the plated products that have a long handle and medium pile length. Used to finish the main area.
• Little roller with long pile or brush. Used to paint hard to reach places.
• Pallet for paint.
• A piece of wallpaper. Used to evenly distribute the composition on the roller.

This set of tools is enough to carry out a quality coloring of the ceiling by a water-making composition. Now you can proceed to the preparation of the surface and the room to finish.

Incorrect tools and materials can reduce quality finishing work. Therefore, they need to come to their choice very carefully. Here you need to take into account many factors, ranging from the quality of the material and ending with the features of the microclimate in one or another room.

Surface preparation

Before starting to finish, it is necessary to carefully prepare the surface and room itself. From the room you need to make all the furniture. Large objects, such as the cabinet, are installed in the center. The space should be organized so that there are no obstacles to work.

Items that stayed in the room, the floor and the walls are desirable to cover with the film. In the future, it will get rid of thorough cleaning after painting. Now you can proceed to direct surface preparation. The preparation process is carried out as follows:

• The ceiling is thoroughly cleaned from the old coating. If we are talking about eliminating whitewings, it can be defeated ordinary water. Old finish need to be thoroughly eliminated. This will provide high-quality applying new finishes.
• An alignment of the surface is carried out with a putty. Before applying putty, the surface must be treated with grounded solution. This will provide reliable fastening putty. After that, it is necessary to carry out grinding.

Painting can only be performed after the surface is driving.

Preparation for painting

Technology applying paint

To paint the ceiling of water-level paint without divorce of roller0430, it is necessary to follow some rules. The first layer is applied liquid paint. This allows you to achieve the maximum adhesion of the substance with the ceiling surface. The roller is wetted in the pallet and rolled carefully along the edge to eliminate excess substances. Also for this you can use a prepared piece of wallpaper.

Painting must begin with an angle and move along the wall. A small roller with a long pile is used under the wall. The main square will be covered with a large roller with an average pile. To facilitate the work, it is better to give preference to a tool with an elongated handle.

Layers need to be applied in parallel to each other. At the same time, the nest must make no more than 5 cm. To avoid formation of divorces, the application of the material should be carried out in one direction. When the first layer is applied, the surface must be examined under different angles. This will determine not painted places.

These places need to be repeatedly painted. At the same time, the movements should be slow and coincided with the previous direction. If the first layer is already reduced, then you should not paint the problem areas, as it will negatively affect the appearance finishing coat. It is best to note this place and when applying the second layer to pay more attention to him.

The second layer is applied perpendicular to the first. And it should be done only when it is completely dry. If you apply a second layer on a low surface, it will lead to the formation of divorces. To know exactly when you can proceed to finishing staining, you must learn instructions on a can with a substance. This is the deadlines for its complete drying.

When conducting painting work It is worth considering the features of a colorful substance. In particular, this applies to the material manufacturer. So, high-quality paints It can be applied only in two layers, and less qualitative - three times. Compliance with technology will ensure uniform and high-quality applying finishing material.

The use of waterfront paint for finishing ceiling surfaces in contrast to lime bliss has a number indisputable advantages. The result retains the resistance of the color for several years, it is easy to clean, it is not very polluted. So instead of inclination and divorces get perfect coatingIt is necessary to know how to paint the ceiling with a waterfront paint roller. Only a competent approach will allow to achieve the desired results.

How to put the ceiling roller

Before proceeding with painting ceiling surfaces, it is necessary to produce preparatory work. It is from them that will further depend on the quality of the coating.

Preparation of the surface to work

Before proceeding with the staining of the ceiling surface, it is necessary to pre-clean it from residues old finish (Paints, putty). If there are drops from 5 cm, they produce alignment with plaster. The algorithm for preparing the ceiling to painting with water-level paint consists of the following steps:

1. Cleaning surface stripping. By applying a metal spatula, and if necessary, the perforator, remove all the detached layers of paint, plaster. Ceiling should be cleaned before concrete. If there are temperatures, it first needs to be moistened from the sprayer, with a wet rag, and then only delete. The surface stripping is better to do after 30 minutes - 1 hour after wetting with water.
2. Processing of primer composition.Application antiseptic tools makes it possible to protect the painted surface from fungus, mold. In addition, this technique allows putty smoothly to go to the ceiling. The market presents a huge range of primers, but the most budget option is the usual whiteness.
   
   
3. Using a primer. To increase the hitch of the surface with a putty, it is recommended to use a special polymer soil. If you skip this moment, then the surface treated only with the antiseptic surface during putty works will begin to swear, it will be lazy that all efforts do not.
   
   
4. Plate Ceiling. This process involves using the starting mixture first, which is grinding after drying. Then re-applying it and grinding again. Then also in two navigations finish spacurewhich after drying also rubbing. Despite the complexity of this stage, the result of staining will exceed all expectations. If you ignore putty work, then with artificial light all flaws will be visible.
   
   
5. Ceiling grain.Before painting, one should once again treat the surface with the ground, especially paying attention to the corners.
   
   

Tip! Considering that when painting the ceiling of dirt and traces from paint on the floor and walls cannot be avoided, it is recommended to use polyethylene to protect them. It is desirable to fix on the walls with the help of paper tape.

Rules Painting Ceiling Roller

To properly paint the ceiling with a roller, you need to follow the following recommendations:

1. It is better to produce surface staining in the daytime.
2. Starting to apply paint costs from the angle that is as far away from the exit.
3. It follows the paint with parallel movements so that one strip lay a little braziness to another (10 cm).
4. To avoid viewing of divorces, you need to paint further after drying the previous layer.
5. Apply a new layer more efficiently perpendicular to the previous one.

Tip! For a smooth and perfect surface, the rapid paced of work is unacceptable, everything needs to be done neatly and efficiently.

How to paint the ceiling with roller without divorces and stripes

A frequent problem of beginner masters is the appearance of strips and divorces when staining the ceiling surface. To prevent such negative consequencesYou need to stick to painting technology and eliminate drafts, remove all the heating devices from the room. Also, you should not paint the ceiling with a roller right above your head. It is worth making a breather and move from one site of work to another.

How to paint the ceiling acrylic paint roller

The procedure for performing the finishing of the ceiling surface acrylic provides the following actions:

1. Filling the paint paint cuvette.
   
   
2. Crossing the corners and baguettes with a suitable brush.
   
   
3. Application of paint on the ceiling surface by means of a roller, which is held at an angle of 45 degrees. Painting is performed by parallel stripes, lightly overlapping each other to eliminate the formation on the surface of unpainted zones (dry sections).
   
   
4. Apply the next paint layer in the transverse direction with respect to the previous one. When smoothing the docking places, the roller should be squeezed enough. There should be a certain time between the layers of paints, so that everyone manage to dry well.
   
   
5. In the presence of windows, only on one wall of the room, the last layer is applied in the direction perpendicular to their plane. If the windows are a lot (on different sides), then staining from walls towards the center of the room.
   
   

For better drying, the ceiling surface is not recommended to use additional heating devices, Better, if this happens in a natural way. The main thing is to close all windows, doors so that there are no drafts.

How to paint the ceiling with water-mounted roller

Phased guide to staining the ceiling surface:

1. Saving a roller to one side in the paint, ride it several times on the ribbed side of the painting capacity. If there is a surplus of paint on the pile, then in the treated surface, it is guaranteed to appear. After rolling roller, the fur coat should be even soaked in paint. If there are problems with removing excess, then you can use the brush.
   
   
2. Apply the paint on the ceiling is recommended from the window to better see errors. Works should be guided by small squares or strips. To make more convenient and more efficiently to apply paint on the ceiling, you need to use the extension that joins the tool.
   
   
3. In the event of the appearance of brightly pronounced empty moments, it is not necessary to reject their repainting. It is necessary to do it after full drying of the entire ceiling surface. Only so it will be possible to achieve uniformity.
   
   
4. The unpainted plot is first gripped, and then apply an extra layer of paint, but not on it, but on the whole ceiling.
   
   

To reveal the "dry" places on the ceiling after staining, it is necessary to inspect the surface at different angles, moving away a little to the side.

Tricks Painting Ceiling Roller: Video

There are several techniques that allow you to achieve the perfect staining of the ceiling with roller:

• corners to cry in a better brush;
• do not delay the work on paint, additional pauses only worsen the quality of the coating (area of \u200b\u200b20-30 square meters. m should be processed in 30 minutes);
• do not save on primer compositions and putty;
• preparatory work should be done particularly carefully;
• staining should be made uniform and consistent movements.

Important! Before applying the next layer, the previous one should get a good.

Conclusion

Painting the ceiling with water-level paint roller is not as difficult if you adhere to the basic recommendations for the preparation of the surface and the application of the layers. If there is no experience, first it is recommended to practice on the wall, which will continue to be saved by wallpaper or on a piece of plasterboard. Ideally painted ceiling will become a real decoration of any interior.

There are many options for the ceiling finishes, but the whitewashes are the most popular of them. It costs inexpensively and looks very good if the paint was put correctly. Typically, the ceiling is recommended to thoroughly clean the lime or chalk from the old layer before applying a new one. but you can put the following layer of paint and right on top of the old. The main thing is to know how to do it to be guaranteed to get good result. Nothing complicated here - possessing necessary knowledge, anyone can cope with it independently without spending on the execution of all necessary work a lot of time.

What to bother the ceiling?

• chalk;
• lime;
• water-emulsion paint.

Each of these options has its pros and cons.

Table. Materials for whitening ceiling.

If you do not want to wash off old bliss, it should be borne in mind that it is impossible to apply lime on the chalk and on the contrary - in otherwise The paint will fall badly, dirty divorces are formed on the ceiling.

On top of the chalk, you can put a new layer of chalk or water-emulsion paint, and the lime can be covered with the same emulsion or lime. At the same time, it is necessary to take into account that for painting on top of the old layer of lime or chalk, the enamel and oil paint are categorically not suitable.

Instruments

There are three main ways to apply blames for which you can use:

• roller;
• brush;
• spray.

If done paint rollerThe paint will fall to a smooth layer, nor divorces, no spots at the same time. To receive you need to good whitewearUsing this tool, the coloring composition will need to be applied in two layers. In addition to the roller itself, it will take a container for the solution, something for mixing and a greasy tray. Also need a small brush to put paint on the ceiling sections on the joints with the walls - the roller make it gently, not blurring the walls, it will not work.

Brush for bliss can be purchased at each store building materials. It should be inexpensive. While working with a brush, paint is very sprinkled, so you need to carefully protect furniture in the apartment, as well as your eyes.

Using a sprayer Poons can be easily applied a very neat smooth layer. In the event that the paint is applied to the sprayer, you need to carefully trace it to be without lumps. Its consistency should be more liquid than the whitewings have to be applied using a brush or roller.

How to choose a waterfront paint

If everything is more or less clear with chalk and lime, then the choice of suitable water-emulsion is more complex task. There are many varieties of these colors that differ in composition and properties.

1. Polyvinila acetate Water Immulsions are the most affordable.
2. Paints with acrylic additives - Most Popular. They are suitable for any surfaces and resistant to abrasion (although in the case of paint for the ceiling, this property is not so important).
3. Silicone The water-mounted paint lies well on top of the old whitewash even without the use of primer. It is distinguished by high vapor permeability and perfectly suitable for painting the ceiling in the bathroom or in the kitchen. This type of coloring composition reliably protect the surface from the appearance of fungus.
4. Water-emulsion paints with latex differ in very good water resistance; they can be washed with washing agents. At a price, they exceed all other water issues.

In order to make the best choice, carefully examine before buying a label. It should contain the purpose of paint, the degree of covers, consumption for one square meter And other parameters for which you need to pay attention. Properly selected water emulsion will make it possible to make a snow-white and durable coating, it will not turn yellow over time and guaranteed the ceiling from the appearance of fungus.

Painting of water-free paint

To receive you need to good painting Over the lime, it is better to first cover the old layer of acrylic primer. After that, it is necessary to check the surface for strength, trying to scratch it. If it does not appear, you can apply paint.

But when painting, on top of the chalk, it is not necessary - the water-level paint will advantaged well and will stay without soil.

Before starting to work, you need to prepare the room. It is necessary to make or carefully close the film all items so that they do not bother paint.

If you put paint with the brush, put the smears first perpendicular to the windows, then in parallel. If the last layer is laid parallel to the light source, the bands after drying will not be visible.

Painting with a roller - a simpler and convenient process at which you need to perform the following steps:

• pour the paint into the malarious tray;
• plunge the roller in the bathroom, and then ride it down the slope, evenly distributing the paint on the surface and giving a track is superfluous;
• put the first layer of paint perpendicular to the windows;
• wait for a complete drying of the composition;
• then add the second layer, which must be located in parallel to the window to the window;
• carefully digging the sections of the ceiling on the joints with the walls of the brush.

Apply the paint from the sprayer is even easier - it is enough to put three smooth layers, you do not need to follow the direction. The main thing - when applying each of them, not to skip a single square centimeter of the surface.

Painting chalk

Prepare claimer For painting the ceiling is easy; for this:

• on 10 liters of water, it is necessary to take 5 kg of chalk and 50 g of joinery glue;
• the consistency of the solution should be such that it does not glare with a knife, if the mixture is poured from the blade, you need to add more chalk;
• you can add to the composition of blue, in this case the ceiling will be snow-white, without a yellow shade.

Technology Painting with chalk fundamentally no different from the technology of application of water disposal. First, select one of the options - application of brush, roller or spray. Then, in the process of painting, do not hurry and carefully watch the composition lay down to a smooth layer. In this case, the new kind of your ceiling will surely please you.

Painting with limestone

In order to make a solution of lime for painting the ceiling, you need:

• take 2.5 kg of lime, add 100 g operated salt in water and a small amount of blue;
• mixing all the components of the mixture, add water to them so that the outcome volume amounted to about 10 liters.

The basic rules of application are the same as for chalk and water-emulsion paint.

Important moments

When paving the ceiling necessarily need to take into account the specifics of the room. For example, in the bathroom you need to use special compositionwhich will be resistant to moisture and protect the ceiling from the appearance of fungus. Otherwise, the paint will quickly lose appearance and can even start turning pretty quickly.

It is also important to remember the safety during painting. In order to avoid hitting the eyes in the eye, on the skin and in airwaysYou need to use safety glasses, rubber gloves and respirator. If this is not done, the coloring composition can cause allergies or even chemical burns.

How to wash off the ceiling old bliss

Despite the fact that the ceiling can be painted on an old whitewash, the best option For high-quality painting will be preliminary cleaning and alignment of the surface. Old blotch, which keeps bad and peeling, it is necessary to wash off. If this is not done, you do not have to count on a good result. If the layer of lime or chalk, which is already on the ceiling, thin, smooth and keeps well, painting right on top of it will be quite a good option.

In order to wash off a chalk whitewash, it is necessary:

• take the foam foam sponge and moisten it in water so that it is wet, but the drops with do not flush;
• after that, it is necessary to carry out a wet sponge over the ceiling once again, washing out one layer after another, while it should be saved as often as possible;
• then you need to carefully wipe the ceiling with a wet cloth - it is also necessary to dip it into the water as often as possible.

Wash the layer of lime a little more complicated, because:

• first of all, it is necessary to moisten the entire ceiling; To do this, you can use the pulverizer;
• using a spatula or scraper, you need to remove the broken layer of lime;
• and finally, you need to thoroughly wash the ceiling with a crude cloth or a sponge to remove the remains of lime and dust from it.

Removing the old whitewash: A - Moisturizing the ceiling, B - Remove the splashing coating.

It is better to work on the plots - while you will shoot a spacious lime from one of them, the other will be drinking moisture. Thus, you can quickly go through the whole ceiling.

In order to wash off the old bliss, you can also take advantage of special compositions.

1. In a construction store you can purchase a special wash. It must be applied to the ceiling with a sprayer. When it dries, a crust will appear on the ceiling that you want to remove with a scraper. After that, the surface will need to simply wash the cloth.
2. Another option is to add vinegar to the water (one large spoon is enough to 5 liters) and 50 ml of the foam for the bath, mix thoroughly and apply to the surface of the ceiling. Wheeling 20 minutes, it can be cleaned with a scraper, and then rinse thoroughly with a wet rag.
3. Another way is to make a holter, mixing the water with flour. It should be applied to the surface of the ceiling and give it to dry, then you can easily remove the whitewash.

Video - Removing the old whitewash

Poles the ceiling with hands of professional masters

Despite the fact that it is easy to whitewashing the ceiling, not worth discounting and such an option as an appeal to a professional master.

This solution is good because:

• it will help save time;
• turning to K. good master, you can be sure that you will get an excellent result;
• the master will need a minimum of paint in order to bother the ceiling.

At the same time, as mentioned above, the whims really does not take much time. Therefore, contact the master in order to save time, it makes sense first of all if you are a busy person and have accustomed to always hire professionals to fulfill certain works.

Due to the fact that the master is consumed by at least the paint, the appeal to him can do badly more expensive than painting the ceiling with their own hands. The main thing in this business is to find really have a good specialistWhich at the same time will take a bit for his work. The main thing is not to hire a halitchikov who, working after the sleeves, can make even worse than it would have happened - such masters also come across. They take a little for their work, but such savings in the end will cost much - you will have to either redo it, or stay with a poorly painted ceiling.

The ceiling over the old paint is a simple and inexpensive way to improve the interior of the room. It is not always possible to use it, but in the event that the former layer is thin, smooth and keeps well, chalk, lime or water-free, applied directly to old paintwill hold well. If you are right for business, your new ceiling will become really beautiful, and such a result of painting will delight you not one year.

Video - Ceiling with your own hands

Ceiling with paint with your own hands - surface without divorces and stripes

Many do not know how to paint the ceiling without divorce and all kinds of irregularities, hope for your own experience and knowledge. However, it is often not enough, and the final appearance of the ceiling does not correspond to the wishes and preferences.

From this article you can learn everything about how to paint the ceiling correctly, and do it on a professional level and as simple as possible.

Proper preparation of the ceiling coating

In order to learn how to paint the ceiling without divorces, in the first stage it is necessary to properly prepare the surface:

Important: In order to perform the painting of the ceiling with your own hands, you need to step by step to comply with the recommendations specified in the table, strictly phased, and using a special tool, such as a spatula, building level, Various rollers, brushes, sandpaper.

Tip: In order for dust and dirt in the process of surface preparation, it is an order of magnitude less, after stripping the surface, it is recommended to use a vacuum cleaner.

If you want more details to get acquainted with the surface preparation process, we recommend viewing the video in this article.

Painting

Today, there are several varieties of paints:

• Water-emulsion paint . The basis is presented in the form of an emulsion, which includes water and small particles of polymers. Such paint is easily applied and after evaporation of water forms a thin and reliable film. In order to learn how to breed the water-making paint for the ceiling, it is enough to read and follow all instructions specified by the manufacturer on the packaging or in the instructions for the purchased product;
• Chalk. Such a coating is made of water and chalk. Paint is one of the cheapest and affordable. Despite the possibility of applying such an option, it has a lot of disadvantages, such as: the impossibility of eliminating pollution, no possibility to produce wet cleaning Coatings, DISTRIBUTION, LOST initial color, the appearance of cracks and irregularities;
• Acrylic. Different with its impeccable resistance. Components include such components as: water and polymers, which, when mixing, form a sufficiently reliable and durable basis, which, after frozen, has an excellent appearance and a homogeneous structure;
• Latex. The composition of the painting base for ceilings includes synthetic latex. The advantages of the composition refers fast application and drying surface. For complete drying, each layer will need no more than one hour. Also, such paint has a smooth surface - a film, which is easy to care for.

Photo of materials I. different options Performances will help you get more details with the process of work and painting.

IMPORTANT: If you do not know how to paint the ceiling with water-based paint without divorces, we recommend that you carefully read and follow the next step-by-step guide.

Instructions for painting without divorce

To perform these works, we need the following materials and tools:

• Roller with a long pile (see Ceiling painting roller: how to choose). A short pile does not fit, because it is not capable of gaining enough painting composition. Porolone fixtures during operation do not give an ideally smooth surface, form bubbles and divorces;
• Tub for roller suitable in size. In such a tray, not only the paint is also used, but also the pre-roller roller. This is necessary in order to work on the ceiling in the process, stripes and irregularities are not formed;
• Paint with the necessary composition. Most. optimal option It will become an acrylic paint.

IMPORTANT: Before starting work, carefully read the advice and recommendations of the specified manufacturer on packaging with paint. Many manufacturers advise a little breed it before applying water.

Painting ceiling, basic rules:

1. Each layer should be one thickness, and the surface must be painted with the same paint, from the same manufacturer and strictly defined consistency;
2. The ceiling must be painted at least two or three layers;
3. Each layer is applied perpendicular to the previous one. The last layer should be located in the perpendicular direction to the window. This is necessary in order to ensure that even in the presence of insignificant irregularities, they were invisible and lost behind the sunny rays;
4. Each layer is painted at a time. It is impossible to start work and, without completing the layer, stop, because in place in which the paint has already dried, with a fresh continuation there will be a noticeable and non-eliminate joint;
5. Evaluate the quality and flatness of painting, it is necessary exclusively at an angle;
6. If you forgot to paint small plotAnd the paint has already dried partially, it is impossible to paint it, as the joints, divorces and irregularities appear as a result of this. Leave this area next time.

Tip: If you want to make a ceiling of a certain color, it is possible that the paint will have to be mixed with a special building dye in a certain ratio - proportions, until the desired result is achieved. In order to subsequently, you did not have to mix and select this color again, we recommend that you still knead at the first stage required amount Paints for staining the entire surface of the ceiling, and in the desired number of layers.

What to do if divorces and stripes still appeared?

If, in spite of all your efforts and efforts, divorces and strips on the ceiling as a result of the color appeared and they are very noticeable, we recommend to do the entire process again. To do this will need sanderwhich it is necessary to process the entire surface and after re-stripping, proceed again to the color.

IMPORTANT: If you cannot achieve your efforts of perfectly smooth coverage, we advise you to seek help to professionals or give preference hinged ceilings. Suspended structures look even more stylish, modern, original, and also differ in their durability and the ability to choose design and color solution For a profitable combination with the common room style.

Tip: If the price of paint is important for you, choose cheaper water-emulsion and chalk formulations. Despite your budget, they are also suitable for painting.

If before painting the ceiling, you will familiarize yourself with the surface preparation technology, as well as choose a high-quality painting base, then you will certainly be able to independently make all these works, and the end result will look neat and professionally.