Polycarbonate is a relatively new material on the market, used mainly for the construction of canopies and greenhouses. However, it is very good, it is also suitable for the construction of a country house's porch both open and closed.

This interesting translucent material is easily bent and has the most different shades. Therefore, it can be built from it a very beautiful, practical and original street staircase. How to assemble a porch of polycarbonate with your own hands and let's talk in this article.

Types of polycarbonate porcings

Polycarbonate puffs can have a different design. Sometimes even their walls have an original radial or curved shape, the visors are a real work of art. Schedule such street staircase Usually manufactured from galvanized or forged metal or wood.

Open Polycarbonate Puffs are most often arranged in small dacha Domikov. In this case, this translucent material is separated only by a visor and railing. However, much more convenient in construction is considered a closed polycarbonate porch. In this case, it is trimmed completely.

Polycarbonate Porch

Wood framework

The thickness of the bars frame of the porch of polycarbonate directly depends on its size. Because the material is very light, especially the thick material is not required. Usually the framework makes 50 * 50mm beam. For large porks, the veranda and terraces take the material is thickening.

Polycarbonate porch. Stock Foto Big terrace on wooden frame

Elements in this case are connected by an ordinary galvanized metal corner. Bend wooden bars at home, of course, it turns out hardly. Therefore, the porch in the dacha of polycarbonate on a wooden frame most often has a simple rectangular shape.

A simple method of flexing a wooden bar

Wooden frames are usually used if the porch itself is made of polycarbonate and wood (march).

Metal carcass

A metal frame for a polycarbonate porch is collected using a welding machine. Sometimes bolt connections are also used. For construction, a profile or round tube with a cross section of 50 mm or normal profile. Bottled material for the frame, using the pipe bend.

How to make a complicated porch house of a polycarbonate house? Photo of pipe-bending, with which you can make a curved frame

What you need to know, manufacturing frame

There are several basic rules that must be observed when assembling a frame of a private house of a private house from polycarbonate:

1. When making a frame under a wide visor, it is necessary to strengthen the transverse bars or profiles. The distance between such ribs should be at least half a meter;
2. All stakes of polycarbonate sheets should be located on a bar or profile;
3. In addition to the supports, even if four of them, the visor must be attached to the wall of the house. A frame is recorded usually on anchor bolts intended for the material from which the house was erected.

Pillchko from polycarbonate. Photo ready for installation visor

How to make a porch of polycarbonate. Sheaving

In places of fastening polycarbonate to the frame (step - 30 cm), holes are done. In the sheets they must be on the floor of the diameter larger the rods of self-tapping. The fact is that when temperatures drops, polycarbonate can expand and shrink. For the same reason, the screws cannot be tightened too much. There should be a gap between a hat and leaf of 1 mm.

To the frame of polycarbonate is attached to special tapes with thermoshabami

On the direct visor, the material is placed with a small bias aside from the building channels perpendicular to it. On the arched - in parallel. This is necessary in order to ensure the free stock of condensate formed inside carbonate. On the walls, the channels must be arranged vertically.

Original beautiful porch Polycarbonate veranda

How to make a porch inside

How to build a street staircase from carbonate, we found out. Now let's see how to make it right. The outer design of the porch of polycarbonate may be the most different. This is illiciously indicated by the photo presented on this page.

Fully closed porch of polycarbonate. Stock Foto Stylish street staircase brick house

The internal design of its entirely depends on its size. If this porch is a veranda, it will be quite good to position here comfortable light chairs and a table of plastic. When using a wrought skeleton inside such a porch, you can install forged elements (not too massive and overall). A small plastic, rubber or even a textile mat for the color of the walls and the visor will also be quite appropriate. Sometimes there are curtains on the transparent polycarbonate walls of this porch of a private house. The decoration of steps and platform is most often performed from terrace or edged board either tiles.

Flower Street Stairs

We hope now you understand how to build a porch of polycarbonate in the country or in a residential building. It is absolutely not difficult to build this design. In any case, even easier than a staircase with wooden, brick or concrete walls. However, of course, to attach such a porch closed or open only to buildings with the appropriate design of the exterior - more often concrete and brick.

Today, the porch of polycarbonate is no longer surprised. Easy, openwork, fresh, air, beautiful, accessible, practical and relatively inexpensive. Of course, modern materials open up ample opportunity to implement both simple and most incredible architectural designs, and sometimes the design of the porch of polycarbonate amazes with its sophistication and originality.

It cannot be argued that the polycarbonate immediately gained huge demand and love of buyers, but over time he proved competitiveness, and firmly took a leading position among building materialsThanks to its unique physicochemical properties. We further explore in more detail than this material is notable, and of course, we will tell you how to build a porch of polycarbonate with your own hands.

Impressive set of advantages and a little bit about disadvantages

So directly and declare: Polycarbonate is unique material. Durable, light, reliable, he misses the light well, and at the same time he delays ultraviolet radiation, Thanks to the UV-stabilizing layer, which is applied to the outdoor side of the sheet. It is not afraid of the large delta temperatures, and calmly transfers the differences from -40 ° C to +120 o C, and it is not deformed, frost-resistant, almost invulnerable to chemical and biological effects, with zero hygroscopicity. It is important that the polycarbonate is not ignited, and does not support combustion, and with a strong flame it only swells, it refers to the material with a small ability to smoke, which is important for both private houses and public buildings.

Pillchko from polycarbonate, photo of the most popular combination of materials, transparent canopy and elegant forging, such extensions are suitable for almost any type of houses.

For the construction of the porks, two types of polycarbonate are most often used: monolithic and cellular. The width of the sheets in all manufacturers are the same - 2100 mm, length 3000 or 6000 mm, such parameters are very convenient for transportation, and in addition, it will not be necessary to make any additional junctions in the manufacture of large designs. In stores, material can cut in half.

Monolithic cast polymer without voids, in appearance is no different from the usual silicate glassEven physico-chemical characteristics These materials are largely similar, but polycarbonate is stronger than 200 times and 6 times easier.

Cellular polycarbonate has a chamber structure. For the construction of the porch, a single-chamber material is usually used, which is 2 monolithic sheets, interconnected by ribbies. The recommended thickness for street visors and canopies for a porch is 16 mm, although the host-barin, and you can always choose another thickness. If serious mechanical loads are planned on the material, it is better to give preference 2, 3, 4-chamber and more sheets. Air inside material provides additional heat and noise insulation.

Cellular polycarbonate, sample colors

Transparent polycarbonate uses the greatest demand during the construction of the porch, but the material has a basic color range, and, if necessary, you can always choose the desired shade: white, blue, green, bronze, gold, graphite, etc. Colored polymers do not fade into the sun, as dyes are added at the production stage, they are located in the structure of the sheets.

We have already noted that polycarbonate is very light material, which is very preferably in the manufacture of mounted structures over the porch, low weight reduces the load on bearing walls to a minimum. But in the manufacture of canopies for the porch on vertical supports, the ease of material can be given unpleasant surprises. So, under such extensions it is impossible to arrange unheardly columnar foundations in areas with high levels groundwater And the strong bunch of soil, the expansion of the soil simply will extrude an extension. Alas, you will have to spend money on piles or slab foundation.

Single straight roof on pillars - the most easy optionhow to build a porch of polycarbonate with your own hands

Types of designs

Polycarbonate porch, photo examples in the article demonstrate the most successful ideas For an extension, it can be both very modest, in the form of a visor on mensen, and impressive sizes, even overlapping the entire area in front of the house. Such entrance groups are in demand as in public buildings: hospitals, shopping center, business centersand in private construction, largely due to the simplicity of installation of the structure. A small porch in the cottage from polycarbonate can be built in a couple of days.

Polycarbonate and brick porch

It would seem that the porch of the private house from polycarbonate is somehow not homely, it is an alien material in the green zone, he does not fit into the natural landscape. But due to its transparency and lightness, polycarbonate is almost impaired, and does not spoil appearance. So that the structure looks harmonious, the main thing is to correctly pick up the porch design.

Closed porch of polycarbonate, photo easy and practical design on metal frame

Polycarbonate porch is either attachmentor reference, on 4 or more pillars. All construction, in general terms, is to install the frame, and the mounting on it sheet material. It is the frame in this case that plays a capital role, so it is important to make a preliminary design of the structure, think over the size, form, points of the support, from which materials it will be manufactured.

The base for the polycarbonate porch can be made of wood and metal: wrought, aluminum, from iron corners and tubes. The wooden frame is easiest to collect with your own hands, but that he serves for a long time, it needs to be soaked in fire and antiseptic.

Polycarbonate porch, closed on the side, on a square frame metal pipes

Aluminum structures are very light and durable, assembled at special corners, do not require welding workThe material is well tolerate the effect of the aggressive environment, and does not require any additional processing.

The metal frame for the porch from the corners is very heavy, the sliced \u200b\u200bparts will need to be cleaned from rust, if necessary, bend the pipe bend, connect with welding, clean the joints with a grinder, paint.

Covered polycarbonate terrace in cottage settlement

Forged base under the polycarbonate porch is the most beautiful, but also the most expensive. But I must say that standard, but at the same time no less beautiful forged mensen for suspended structures You can buy on construction market At a very pleasant price.

Polycarbonate house porch, photo of a canopy in front of the house, the design fully protects the inlet of precipitation

How to make a porch of polycarbonate

For the manufacture of the porch will take:

• metal pillars that will serve as vertical supports;
• square profile for crates;
• the template for which arc will bend;
• polycarbonate;
• welding machine and Bulgarian;
• self-tapping screws with thermoshais;
• ribbons for docking and end profile of polycarbonate thickness;
• metal primer;
• paint.

First of all, install support poleswho will keep on themselves the whole design. Cut them to the desired height, and tie profile pipe For the gloves to give the construction of strength.

Then put in size square truma, put it on a flat surface, and carefully do shorts. The distance between them depends on the edge of the pipe, is usually 30-50 mm. Carefully bend the pipe along the template, all arches must be with the same radius, the recommended distance between them should be no more than 600 mm. The finished arcs are welded with all the longitudinal jumpers, and install on the prepared frame, weld the design. Credit framework, stubble, paint. After a complete drying of the metal blank for the porch, the polycarbonate can be attached.

Scheme how to fasten a leaf from carbonate

To do this, you need to cut off the necessary size from the sheet, the res better to do hardness on the edge. Next, place and drill holes, which should be 3 mm in diameter more the legs of the thermoshaba, so the thermal is neutralized. The distance between the holes should be 300-500 mm. Carefully blow and spend the polycarbonate so that the garbage and dust remain. Clay the ends with a special ribbon, dress the end profile. Screw the polycarbonate to the frame, do not try to tighten the screws tightly, thermoshaba with an effort must scroll slightly.

You can decorate such a porch with beautiful lamps or diode illumination, suspended pots with flowers on wrought pendants will be appropriate. Instead of metal railing, the sides can be seen by polycarbonate or even a tree. But in principle no additional finish Polycarbonate porch is not required.

Polycarbonate and wood porch, original idea for giving or country estate

The polycarbonate porch is very unpretentious in operation, it is easy to clean warm soapy solution. Do not try the design by abrasives, solvents, ammonia, acetones, phenols, ethers. If you are all done correctly, the porch of polycarbonate will protect the entrance and dust for a long time. Be sure to watch the video, how to make a polycarbonate porch on metallic frame Without welding.

Porch, as functional and decorative design, gives the whole building a complete and perfect view. So that it is for this, it is necessary to perform the design of the porch in one with the house with a stylistic direction.

Not everyone will affect the pocket of the entrance with the help of expensive construction and finishing materialsBut I want him to be beautiful, original and distinguished individuality. This requirements are responsible for the porch of polycarbonate, which is most accessible in value and has a mass of positive qualities.

Moreover, unique properties material, variety of colors and species, allow you to find extraordinary design solutions For registration of the porch at home.

In the article, we will tell about the types of material, its pros and cons, as well as the possibilities of using polycarbonate in the construction of the poles, provide a photo of the most interesting options Design.

In construction, we found the use of two types of polycarbonate - cellular (cellular) and monolithic (cast). Let's look at both of these kinds in more detail.

Cellular polycarbonate

The most affordable material is used everywhere in the erection of light structures, such as:

• Veranda;
• Arbor;
• Porch;
• Greenhouses.

It represents two or more layers of polymer connected by the longitudinal ribs of stiffness, between which voids are saved. The structure of the sheet on the cut resembles beesh cells or cells, hence the name. The thickness of the sheets varies in the range from 4 to 25 mm.

The main pluses of cellular polycarbonate are:

• Low weight.
• The ability to withstand significant snow and wind loads.
• Resistance to significant temperature differences without changing technical and operational qualities.
• High thermal insulating I. sound-insulating propertiesexceeding the indicators of some other materials, such as glass.
• Good light permeability (up to 85%).
• Excellent bending strength and gap.
• Resistance to ultraviolet.

• Many colors of bright shades.
• Resistance to exposure to open fire.
• The ability to use polycarbonate to create structures of various configurations.

Well, the most defining factor in popularity this materialIs its cost. For the affordable price of any owner of the country or country house There is a chance to decorate your dwelling in the entrance of an individual, original design.

A unique porch with polycarbonate can become a central figure of the entire architectural composition, and the main emphasis in the decoration of the building.

Cast polycarbonate

This species has a dense, smooth and transparent or matte structure with thick sheets from 2 to 20, in some cases 40 mm.

Monolith has all the pros cellular polycarbonateAnd according to some indicators, it exceeds it:

• Special resistance to mechanical damage.
• Small weight.
• High traffic frequency (up to 96%).
• Wide color gamut.

• Preservation of transparency I. technical characteristics When exposed to negative atmospheric phenomena, ultraviolet, temperature drops.
• The monolithic polycarbonate is an excellent glass substitute, and it is not inferior in transparency, and it is even much superior to shockproof properties.

The only drawback of this material is quite a high price, but it is justified by its excellent technical parameters.

Important! Thanks to the low weight of the polycarbonate, for the construction of the porch, it is not necessary to build a monumental foundation, it will be enough to install a columnar or pile base, or bypassing a light canopy attached directly to the building wall.

Strength and flexibility of monolith allows you to make it from it complex structures Arched or dome-shaped form. The material is perfectly cutting, so it's pretty simply to carve elements of any configuration with your own hands.

Made from polycarbonate arbors, porch or veranda will perfectly skip the natural light and at the same time gently dispel bright sunlight across the entire inner area, lighting every corner.

Profiled (wavy) polycarbonate

This material is a kind of monolithic polymer, and has all positive qualities. And thanks to the wave-like form (peculiar ribs of rigidity), its strength increases significantly. It is produced in transparent and matte versions, has many color solutionsDifferent with the size and shape of the wave.

Finishing the porch with polycarbonate profiled, is mainly in the visor's device, because it has similarities with slate. But it is not formed to install it as a vertical protection of the porch.

To date, due to fairly high cost, the profiled polymer is less in demand than other analogs of polycarbonate.

Types of peepers from polymer

Polycarbonate roof for a porch may have various forms. The most common are:

• Single-table, having a slope of at least 7%.

Such a roof does not require a complex frame, it can be built from any material, and the visor itself will be peeled into light supports, or just attach to the wall of the house.

Important! But if the width of the canopy is much larger than its length, then experts recommend installing additional supports under the remote edge. IN otherwiseThe design may not withstand snow load.

• Two-batch, which can be single or two-level.

Such a canopy is convenient in the regions with large quantity precipitation. The bias in these cases make more for free rolling of water and snow.

• Arched, simple or complex configuration.

This, the most common visor shape, is distinguished by the ability to withstand elevated snow and wind load.

• Dome-shaped, the original form gives the entrance individuality and uniqueness.

Visor over a porch of a polycarbonate of such an extraordinary form requires an exact cutting of material and figure frame. In addition to these most common visors, other forms are used. The figure below shows all possible canopy configurations.

But it is all common, and frequently used canopy shapes over the porch. If you decide to build an extraordinary porch to the house - projects from polycarbonate presented in the article can be taken as a basis and apply their personal ideas to them.

How else can you make a visor porch

I would like to note that some owners go further and apply the combination of various configurations.

It must be admitted that such bold ideas look very original:

• For example, a single-table visor is perfectly harmonized with arched.

• Or such an asymmetrical option when the arch smoothly goes directly.

• This visor is made in the form of the dome, one segment of which is raised in the form of the arch.

• At this photo, the unusual visor shape is duplicated by two more petals of smaller in the edges.

Here any options are possible, and if you give the will of your fantasy, you can create a unique porch with your own polycarbonate hands, which will become not only the pride of the owner, but also a masterpiece of design art. In addition to make entrance group Another interesting, manufacturers are offered for the device of light canopies to use special profiles.

Polycarbonate frameworks for frame

In order not to lose the design itself, and the visor to give ease and transparency, the framework elements from the same polycarbonate are used.

• The profile, of course, does not exclude a fully carcass device, but it will help to connect several polycarbonate sheets into a single design, which allows you to get rid of intermediate elements and increase the speed permeability of the visor.
• For example, when the dome device, the framework will be needed only for supporting the sheets around the perimeter and racks, and the segments themselves can be connected using transparent profiles.

Important! When using transparent elements, it is necessary to accurately measure the dimensions of sheets, about the maximum possible area and the weight of which will tell the instruction on the device of small-sized visors and canopies using polycarbonate profiles.

• To protect the seams from the flow, thermoshairs of polycarbonate are used, they can also be chosen in color.

• Special profiles facilitate the frame assembly, are ideally compatible with polycarbonate themselves for mechanical properties (thermal expansion, bend radius, sizes, etc.). The complete identity of the panels and profiles allows you to create a light, air and harmonious design.

• From exposure sun ray A coexusional layer is applied to the profiles, so for a long time they do not threaten the destruction of ultraviolet.
• Using special profiles, you can easily make a porch with your own hands from polycarbonate, not even having special skills in construction.

Types of Kryground

For protectedness of atmospheric precipitation, three types of poles are distinguished:

1. Open.

This option is usually equipped with a visor or a canopy over the entrance door. Or they are not at all if the site falls under the hanging edge of the main roof or balcony.

The walls here are not envisaged here, but if the porch is located in the recess or under the main roof, the walls of the house at home are partially used in part or oblique rain.

The open porch is relevant to arrange in a private house, with a dry warmth climate or in the country. A canopy can cover a small platform from atmospheric precipitates in front of the door, or cover the large area on which the resting place is arranged.

It is advisable to do this porch if immediately behind it is the covered veranda.

1. Closed.

For such a porch, the presence of walls forming a small tambour in front of the entrance. It is usually suited in a cold or rainy climate. The closed porch perfectly protects the entrance door and part of the wall near it from snow, rain, wind.

The design of the tambour can be different. The photo below shows a porch closed from a mold-shaped polycarbonate.

This form is perfectly opposed to snow and wind loads, snow and water from its surface rolls, without lingering. In addition, such a configuration has increased strength.

The sizes of the porch also differ: if the area allows, then inside such a building you can arrange a small place of rest in a warm, clear day.

Transparent roof over a porch of polycarbonate, and high traffic lights, allow you to arrange in summer period on the closed porch Not only a resting place, but also a small flower greenhouse.

1. Half-closed.

Perhaps this is the most common type suitable for any climate. Here it is possible to use several options:

• With an open facade side.

The front is left open, if the porch is located with a leeward side of the house. But before shelter the porch with polycarbonate, it is necessary to take care of the protection of the frame. Metal paint paint for outdoor work, the tree is impregnated with a special antiseptic composition. Otherwise, its surface will constantly suffer from negative atmospheric factors.

• With partially raised walls.

This option is relevant if the input site is large, and atmospheric precipitates do not reach the front door. But from hitting a certain amount of moisture on the walls of the house, she still does not protect.

• With closed roof and one wall.

This option closes the porch with a windy side, and protects the entrance from snow and oblique rain.

The porch for a private house of polycarbonate is divided into two types:

1. Low.

As a rule, such a porch represents a platform at the ground level, can be slightly higher. It does not have steps at all, and if those are present, then no more than 2-3 pcs. It is equipped with a light visor or a tambour.

Fencing at the low porch is usually no - as a last resort, low airframes around the perimeter. But it is fully allowed to install a railing for decoration and decoration, especially if they are openwork and beautiful. Usually there are forged products.

1. High.

Steps are made when entrance door Located significantly above the Earth.

The staircase is performed from various materials:

• Tree.
• Metal.
• Natural stone.
• Brick.
• Concrete.

The last two options are usually separated clinker tiles Or decorative brick, which allows you to create interesting, unique compositions.

If the porch platform is above 45 cm, it and the staircase at the request of the SNIPA for safety should be equipped with railings. Fences are performed from wood or metal. Metal railing with forging elements is very popular.

Materials for the framework of the frame

Unlike other materials having a solid structure, polycarbonate cannot be used in the construction without a framework, it is necessary to bring the basis for it, which is used as the following materials:

• Wood.
• Metal.
• Aluminum profile.

Since the polymer has a small weight, then the framework for it does not need to be made big and bulky. The design of the porcarbonate porch requires thin, elegant frame elements, otherwise all the beauty of the material is lost.

In the photo, the molding of the cast polycarbonate is made using thin nickel-plated pipes, located on top, and practically non-closing space. From this leaf looks simply soaring in the air.

It looks completely different wooden frame. It still has to be done more voluminous, based on certain specifications.

Here you have to equalize the bulky of the base and the elegance of polycarbonate to a more careful processing of wood, accurate frame geometry and contrasting color. But the wooden core will cost much cheaper analogues from other materials.

Metal base with forging elements is particularly advantageous. Such a frame is most suitable for any type of polycarbonate.

The same can be said about thin aluminum or metallic profile - these materials when proper selection Capable to emphasize the lightness and airiness of polycarbonate.

Conclusion

Options for the construction of an input group using a polymer Great set, in the photo we have led examples different species The poles, talked about the material. We recommend watching a video in this article, clearly telling about how to make a porch from polycarbonate so that it pleases you with your beauty for many years.

The porch can be rightfully called the face of the house. In addition to the important functional role, which it performs, this extension is one of the components of the general aesthetic perception of the whole building as a whole. There are many different options Their execution, among which there are too complicated for manufacture without attracting professionals. But you can always find a fairly simple option, quite affordable. independent buildings do it yourself. Porchs are performed from different materialsMore often in combination of several of them. And lately you can see more and more diverse designs polycarbonate - modern materialhaving excellent performance.

Porch for a private house: Important functions

The main function of the porch can be called home protection from various adverse factors external environment - Snow, rain, penetration of cold air inside the premises. In addition, it serves for a more comfortable passage of people in their home.

The porch performs another important feature for a private house - decorative. It is the decoration of the whole building. These facilities are very diverse. Their appearance depends not only on the style of the house, from its finishes and various elements of the facade decoration, but also, of course, from the personal preferences of the owner, the wishes of the living facilities, the material opportunities of the family.

Choosing a color palette for designing an extension, decor elements, species and finishing options - no restrictive factors here. The main thing is to pay attention to - harmonious combination of this facility with the main architectural style Buildings so that they do not look alien to each other, but looked very whole and felt the overall end of the image.

Polycarbonate porch: features and types

Concerning constructive features The porches, then they are two types:

• open - construction with railings and a small visor to protect the house from atmospheric precipitation, often not even covering the entire platform near the entrance;
• closed is a more massive design with side walls, which serve to protect the space at the entrance to the dwelling from bad weather, and a visor that closes the platform throughout its perimeter.

Porch open type Looks very carefully and looks more like one of decorative elements building. Best suited for small country houses and is excellent option For good weather. The closed porch reminds its appearance to the veranda, reliably protects the input zone from external influencesIt allows you to more fully use the internal space, including for storing any things. This design is more suitable for cottages and large enough country houses.

Such material as polycarbonate is increasingly used when building a porch for home. But completely from it, the facilities can not be found too often. Most of the polycarbonate make visors over the entrance or canopies, but the walls of it in the design closed type Also perform, but mostly in combination with other materials. Among the advantages of polycarbonate porchs can be called the following:

• originality of the appearance;
• giving the image of the whole constructing of completeness;
• reliable protection from both rain or snow and from bright sunlight.

Pros and cons of polycarbonate

Polycarbonate - very practical material. It has an original appearance, and in addition it has not too high cost. And rich color palette This material allows you to select the most suitable tint for the construction created. One of its important characteristics is the density of the material, as a result of which it is so widely used. And its flexibility allows you to attach various forms when building structures.

This material has a lot of advantages, and this is the fact that it is almost absent. Among its advantages can be allocated as:

• strength - not inclined to cracking, resistant to mechanical effects;
• resistance to temperature differences - even a few years of operation do not affect its appearance;

• non-aggression - the material has good refractory properties;
• transparency - I miss the light well, but it protects against the bright sun;
• easy - much easier by weight than such transparent material like glass;
• ease of care - does not require any special Tools For cleaning from pollution.

Of course, as any material, some drawbacks are characteristic of polycarbonate. But they are so insignificant that they usually do not stop buyers from its acquisition and the construction of various designs.

Independent manufacture of polycarbonate porch

The construction of polycarbonate sheets can be made independently, not paying for help to professionals. But before proceeding with the construction of the porch, you need to think over all the details, familiarize yourself with the drawings of similar structures, see photos finished design The selected option to pre-assess its appearance. And better, of course, at this stage to make at least a simple project.

Attention! By purchasing polycarbonate to build a porch, it must be remembered that for these structures, a material is used with a thickness of at least 8 mm.

For the construction of the porch, it is important to choose the most suitable polycarbonate that happens two types:

• cellular - with hollow cells, having good strength, ease, high thermal insulation properties;
• monolithic - with a solid structure, which is smoother smoother and dense. It has high aesthetic qualities, the vast choice of colors.

Council. Polycarbonate sheets for the construction of the porch usually buy with some reserve so that it is guaranteed enough for the manufacture of the structure. And they pick it up with the effect of the effect, which wish to get in the end of the finished facilities. And for greater comfort, it is better to purchase this material covered with a protective film from ultraviolet rays.

First, when building a porch, you need to make a frame of wooden bars or square or round metal pipes. The vertical supports are better to concrete in front, and the rear is fixed to the wall with anchors. When construction, an open-type design with a small visor will be sufficiently fixing the frame to the wall. When building a closed design with a wide canopy upper frame Fastened for carrier auxiliary racks, on which the basis for future walls of the structure is also fixed.

Installation of polycarbonate sheets produced in several stages:

• first cut lists desired size and forms, after which they are covered with their protective film;
• then the first sheet is attached vertically relative to the ribs of the frame with a fixation by its self-draws or thermoshabs that protect the holes from moisture;
• next, the lists of polycarbonate closes the entire frame with a dense attachment by their self-draws;
• after the installation on the installation of polycarbonate sheets, the protective film is removed from them, and all the joints between the frame and the plates are processed by sealant.

Polycarbonate is not only practical, but also an attractive externally material, not very expensive at cost. The designs of it look very original. In addition, such a porch is not too difficult to make it yourself. It will decorate the house and last for many years without special attention to him.

Polycarbonate canopy: video

How to make a canopy over a porch of polycarbonate: photo

It is no secret to anyone that to build a porch in the country is not the most simple task, given that it must fit into the general type of building, as well as to be truly functional.

In most cases, it is an original decorated porch can be an unusual business card for home.

there is great amount a variety of options final stage In the construction of the house. Everything priority depends on how you see a beautiful truly porch for yourself and what budget you have.

It should be noted that if you are interested in how to make a porch with your own hands, then it is quite simple and all that is needed for this is to read this article and it is possible to take advantage of some builders' tips.

What is a porch?

In fact, a constructive porch, built in a private house, is the simplest platform of an open type with a staircase that is done right in front of the building. The porch can be the most diverse shape, with an additional canopy or without it.

If we talk about the design itself, which can be selected for the porch and defining for most of its design, they can be divided into three main types: simple, attached or built-in.

The porch of the last type is almost always designed at the construction stage of the house.

Porch of the most popular simple type - This is a platform that has extra steps and canopy over them.

During the construction of this type of porch, the hardest is fill required foundationwhich in any case will need, even if it is light design And you planned the porch of the tree to do it yourself.

The porch of the attached type externally is very similar to a beautiful porch of the built-in type, but at the same time it is very often rebuilt and modified in various ways.

Basis - Fundam

An important point to which be sure to pay attention to the foundation is that its depth is construction work It must be coincided with the depth of the investment of directly the foundation in the entire building. Otherwise, after precipitation of the soil, it is quite possible that the deformation will occur completely in the entire structure of the porch.

If after the sediment of the soil, the design shift will be carried out towards the house, the destruction will begin with the foundation of the porch. With cosmetic repair, in this case, it will not be possible and to build a porch will have from the very beginning.

Be sure to build a special attention to the construction of the foundation, it is worth paying waterproofing the foundation.

Porch varieties for the future house

First priority before the start of construction, the porch must define what material you like most. Most often it is either concrete, or expensive metal, or a stone, a classic brick, acceptable by the cost of a tree.

Deciding to make a porch to the house from the tree, many just hope that it is the easiest and affordable option, in fact, not even suspecting large quantities nuances.

It is the photo of a porch made of wood, without any problems can be found in various magazines more than others. This is due to the fact that the tree many consider traditional material.

All that will be needed during the construction of such a porch is the minimum construction skills, a circular saw, as well as a construction kit.

Note!

If it works, it is best to use or larch or any coniferous breeds. They are characterized by good strength indicators, as well as fairly easily processed.

After a specially performed impregnation, the material will definitely not give up, for example, material from any other solid rock.

Above the porch must be taken care of the visor. This will not only allow the stairs to protect the stairs and its platforms from various precipitation, but also make it interesting to get a wooden porch in short term Without serious financial investments.

Photos of the most different canopies can also be found on the Internet and magazines dedicated to the construction of a variety of country houses.

Photo of the porch do it yourself

Note!