Each owner of a private house of urban or suburban type, suburban or personal plot sooner or later faces the need to improve his territory. And we are not talking about breaking up beds and flower beds, planting trees and shrubs, but arranging comfortable, but at the same time practical recreation areas, cooking and eating food on fresh air... Imagine landscaped area It is difficult without garden furniture, only buying such a thing is not affordable for everyone, and it is much more pleasant to sit on a bench made with your own hands or dine in the fresh air at a table, the execution of which did not cost you a penny. In this publication, we have collected many options for garden furniture that you can do yourself. Possessing only the materials at hand, a small set of tools and a great desire to make your site comfortable, comfortable and aesthetic.

In order for garden furniture to appear on your site, which can become not only a reliable object of the exterior, but also a reason for the pride of the owners and the envy of neighbors and guests, not so much is needed - waste material, perseverance, a little imagination, work and effort. In this article you will find examples of making garden furniture made of wood, construction pallets, household items that were in use.

Choosing a material for the execution of country furniture

In order for do-it-yourself furniture to organically fit into the existing image suburban area or a private yard, it is necessary to take a responsible approach not only to the manufacturing process itself, but also to the choice of material. The most versatile and at the same time very pliable material in terms of processing is natural wood. The advantage of wood is that it can fit perfectly into any stylistic direction in landscape design. And this can be achieved due to the variety of design options - from massive furniture made of logs to light and elegant products woven from vines or twigs.

The advantage of wood for creating furniture with your own hands is also that it has many manifestations. You can create a piece of furniture with minimal material processing in the shortest possible time. For example, regular stumps can be turned into stools or small coasters. All you need to do is ensure that the surface of your new garden furniture is perfectly hewn and safe to use.

You can create garden furniture from twigs and twigs ...

Or logs and large timber ...

Benches and benches are an integral attribute of summer cottage life

Even a very small backyard needs garden furniture to sit on to enjoy the fresh air, watch the sunset, or watch the sunrise. Well, on the site of a large family or in the courtyard of hospitable hosts, where companies gather, it is absolutely necessary to take into account the possibility of seating for several people.

One of the most simple ways creating benches and benches - using timber and a cinder block with square holes. The bench or bench is assembled as a constructor; you do not even need to use any tool or fastening mortar, construction glue. The advantage of such structures is not only ease of installation, but also portability - you can easily disassemble your piece of garden furniture and move it to another place or put its parts in the barn until the new warm season.

If you put soft seats on a bench made of cinder block and a bar and sofa cushions, then an ordinary solid garden bench turns into a comfortable, comfortable sofa.

By combining materials for the performance of garden furniture, you can increase the strength and improve appearance products. For example, together with a tree in one or another modification, you can use metal constructions, for example, parts of beds (backrests, legs).

Outdoor dining area

In the fresh air, any dish tastes better. Every owner of even a tiny backyard tries to create an environment in which to have a meal outdoors, even if it is about short breakfasts. Depending on the needs and size of your family, you can arrange a small area for short meals, or install a spacious dinner table for receiving guests in the fresh air. It is noteworthy that both options can be carried out on their own.

One of the simplest yet most practical ways to organize lunch group in the fresh air - making a table, together with benches. The model shown in the photo will require a minimum amount of material, but at the same time it will be quite roomy. The only drawback of such a dining group is that if you need to increase the number of people sitting at the table, then you can only do this by 2 places (you will need chairs or stools).

You can equip a dining area or segment for short meals (breakfasts and afternoon snacks) like a bar counter. It is not difficult to do this using building blocks and timber or planks. Only stools for such a table top need to be selected for bar stools, with an appropriate height.

Recreation area in a summer cottage or personal plot

Outdoor recreation is associated with different things for everyone. For some, these are gatherings with friends and neighbors, for others - reading on a slightly swaying swing, for others, loungers for air baths necessary. For all options for active and not very rest, you can make furniture with your own hands, and even from improvised means at minimal cost.

One of the most common ways to create seating garden furniture is by using construction pallets or pallets. The advantage of such an assembly is its simplicity - wooden blocks already formed in the part of future armchairs and sofas. Well, even the owner of a summer cottage or any other land plot who has not previously held a hammer in his hands can build a coffee table from pallets. Even construction glue can be used to hold the elements together.

Another plus of using construction flights for the manufacture of garden furniture in the fact that you can get the material at a very low price or even free of charge, because we are talking about used products. But it will only be necessary to take care of thorough cleaning of the surfaces, leveling and a little polishing, impregnation of the material with antiseptics against decay.

From building pallets, you can create whole compositions for the outdoor recreation area. It can be a roomy corner complex, made up like a sofa, comfortable chairs and a coffee table. It is enough to put soft pillows and seats in armchairs and sofas to arrange a living room setting right on a summer cottage or a personal plot ...

Using wooden pallets, you can equip an area not only for relaxation, but also for sleeping. A summer bed or just a layer of building pallets with a mattress is a great opportunity to create an outdoor bedroom - just take care of the canopy over the sleeping area to protect from the sun.

It is easy to build a comfortable swing from old pallets. You can tie them on ropes or chains to the roof of the canopy and gazebo, on the terrace or just under a tall, spreading tree with thick branches.

Slightly less popular, but at the same time practical way arrangement of a summer cottage garden furniture - the use of construction wooden coils. Chairs can be made of them ...

In the spring-summer period, the question of how to make garden furniture with your own hands becomes popular. Successful homemade products can be the most important decoration of any garden. Before thinking about how to properly make garden furniture with your own hands, it is worth determining what it can be made of. The most common material for country furniture is wood, which fits perfectly into site landscape, but other materials are also used. Be sure to take a closer look to see if any seemingly unnecessary things have survived in your country house or in a country house. Quite often, masterpieces are obtained from the simplest objects.

DIY garden furniture. The most popular trend is wooden furniture

Wooden furniture is environmentally friendly, beautiful, laconic and relatively easy to manufacture. Sometimes you don't even need a rough wood to work with wood. male strength... Do-it-yourself garden furniture made of wood different ways depending on what kind of materials are to be used:

• It is easiest to work with ready-made boards, bars, slats - already processed material. There are many simple and more complex ways to make furniture for a summer residence with your own hands. Benches with a back are convenient for rest, a whole set is indispensable for organizing a feast, and a bench without legs will turn out swing- only a few carpenter skills, planks and a lot of imagination are required.

Advice! It is better not to choose logs for creating furniture. conifers... They give off tar that will stain the clothes of those sitting. If there is no other material, it is necessary to first degum the wood.

• Much more monumental benches and tables are made from logs. Sometimes you can just lay down a large log and throw a couple of pillows over the top to create a comfortable seating area, but it's better to work on creating a more interesting project. Some craftsmen manage to do without a single nail, creating a mobile log structure.

• Great for making hemp garden furniture. Separate small stumps can be adapted for stools, and a larger stump for little table... It is only important to secure the stumps so that they do not fall and stagger, for which they can be dug into the ground or placed on a flat surface - a pedestal on a terrace or a small area on lawn... To make them comfortable to sit, you can sew bright pillows for them.

• If you use branches and driftwood from the forest to create garden furniture, you can get into a real fairy tale. Nature itself sometimes dictates the original outlines of future masterpieces. A garden bench made of branches will harmoniously fit into the design of any site, for the frame of which it is better to take more durable material(logs, bars, etc.). Driftwood or branches are sometimes even used as legs, but for the strength of the structure it is better to use them only for the back and armrests.

• You can use tree cuts to create or decorate garden furniture. These cuts can be used on a table top, chair seat, or stool. They are attached to each other and to the base using waterproof glue.

Today, outdoor furniture is an indispensable attribute of a suburban area where there is a green corner, even if it is small. Without a comfortable lounger and a comfy set, you will not be able to fully enjoy the outdoors. After all, there is nothing better than dining in the shade of an apple tree or a pear, and there is little that can be compared to a nap in a hammock. Those who have already purchased comfortable wicker furniture for a summer residence, for example, a rattan chair or a comfortable garden sofa, are well aware of this. However, most likely, everyone knows firsthand that buying such furniture is not a very cheap pleasure, so not everyone can afford this luxury. garden furniture do it yourself - an excellent alternative for those who are not eager to part with a tidy sum. And making furniture for a summer residence with your own hands is much more pleasant.

Wood is the best material for making garden furniture

Garden furniture for the street, made of wood, is the most popular among summer residents. However, not all types of wood are suitable for this purpose. For example, experts advise to abandon pine materials, due to the fact that this raw material is very delicate and sensitive to external factors. Better to choose furniture made of oak, ash or hornbeam - their wood is hard, durable and easy to maintain.

Besides distinctive feature wooden furniture is that it is an absolutely environmentally friendly product that amazes with its beauty and variety of textures. Furniture for the garden is made of wood quickly enough, the main thing for these purposes is to use high-quality material.

The dining table will harmoniously fit into the overall design of the summer cottage. In the garden, he will show himself perfectly both in brown and in more bright colors... In addition to large table the set should include comfortable chairs in which you will feel comfortable enough.

To make the seats comfortable, it is worth tying them up with removable pillows. It is also good when the chair can be folded. Unused, they will take less space and in winter they can be easily hidden in a garage or basement.

The easiest way to make furniture is from a ready-made material. Disassembled boards are easier to process, soak and prepare for painting. You just have to collect all the parts into a single structure, according to the drawing.

There are many ways to make garden furniture. The Internet will help you choose the option that suits you, where in its vastness you can easily find exactly what you need.

Stylish chairs, beautiful tables, comfortable sun loungers, swings, armchairs - this is just a small list of what you can do with your own hands. Of course, for this you will need some carpentry skills and a good tool, as well as the presence fresh ideas in the head.

How to choose the right style

The most fashionable sets of garden furniture are those that are made in or French style, the style, country, etc. is also quite popular. Country music is characterized by an uneven, rough structure. Cast iron, finished with metal-plastic is often combined.

In romantic gardens, a wrought-iron French style is appropriate. If you want to introduce a subtle note of Provence or shabby chic into a green corner, it is best to put bleached rattan furniture.

Comfortable furniture is one of the staples in any green space. It can be a companion to your morning coffee or a barbecue lunch. Daily outdoor recreation, especially on sunny days, is a balm not only for the body, but also for the soul!

Leisure furniture

Garden dining furniture is not everything. To fully enjoy a pleasant stay among blooming greenery, you need to buy more and full set furnishings. The sets include a sofa, two armchairs or chairs, plus a low coffee table. The most fashionable are rattan designs covered with large pillows.

The soft accessories are mostly covered in cotton. Highly resilient polyurethane foam is located under the fabric of the fluffy coating. Armchairs, sofas and chairs are often cubic in shape, making them voluminous and very comfortable.

Garden set made of pallets (pallets)

Also quite popular is wooden furniture made from pallets. It is very easy to knock down such structures, paint and soak. Pillows can also be sewn on your own or purchased from a garden supply store.

It is quite simple to produce furniture from wooden pallets (pallets), and most importantly quickly. Only 2-3 pallets will be enough to fold one by one to get a coffee table. Impact-resistant glass with machined edges is set on top of the table. That's it - the coffee table is ready, all that remains is to make the chairs. You can also make them from the same material, only here carpentry skills will come in handy. Using a hacksaw or chainsaw, cut the pallet into two parts, one of which will function as a seat, the other as a backrest.

The presence of a sofa, an armchair or a pallet lounger in the garden will emphasize the individuality of your site, create a cozy atmosphere, make it truly extraordinary and worthy of attention.

If you have a large number of pallets (the material can be purchased for a small amount in hardware stores), you can organize a full-fledged resting place from them, where you can relax with a large company. In this case, construction or open construction can be completely abandoned.

Construction pallets (pallets) can be used both painted and unpainted. Their design feature allows you to store something useful between the rows of boards. You can also take this space drawers, equipping them with a special mechanism and beautiful handles

Furniture is always as good as new

Climatic conditions contribute to the fact that both the tree and the vine or rattan fade, become dull and brittle. Cast iron and metal furniture can be destroyed by corrosion. So, if you do not have umbrellas in the garden, remember to systematically impregnate your furniture. To reliable materials from the destructive effects of external factors, they should be covered with something.

The best way to protect wood is to apply a special acrylic varnish on it. It will not only protect the wood structure from moisture, but also prevent the appearance of blue, mold and mildew on it.

The tree must be degreased without fail. Old layer impregnation should be removed sandpaper, best of all with a grain size of 150 to 320. The thickness of the paper is selected according to the degree of unevenness of the substrate. Not all types of wood require impregnation. For an exotic wood like teak, this is overkill.

Rattan garden furniture should also be coated with oil or varnish every 5-6 years. Corrosion on furniture made of metal must be cleaned with fine-grain emery paper and painted with the selected paint against corrosion.

It is important to remember what to restore old furniture always cheaper than buying a new one. Well-kept and updated furniture will make your garden look elegant and inviting at no extra cost.

Chaise longue for summer cottages - comfortable rest in the garden

In ancient times, people loved to relax among the greenery on soft ottomans or sun loungers. Today, these are not only comfortable, but also functional sun loungers.

Their sleek, adjustable design features headrests and armrests. The fabric covers are removable so that the sun loungers can stand in the garden even on rainy days.

Beautiful design and smooth lines - all you need for a summer chaise lounge

For sun protection, you can use a shade canopy or an umbrella. The latter will brighten up your time outdoors. A bright, colored spot that protects from the sun will bring a touch of freshness and lightness to your garden.

Garden umbrellas must be stable so that they are not overturned by a sudden gust of wind. Therefore, the frame of the umbrella must be strong. It is also very important correct basis and the functional masts and bowl should be made of good quality material.

Rattan - a classic of the genre

Rattan has been used for making furniture and accessories since ancient times. Furniture made of it is characterized by lightness, elasticity and is associated with a romantic, elegant Provencal-style garden.

This material is easy to paint, so you can always keep your favorite furniture in in the best possible way... Rattan looks beautiful in a natural color, as well as a noble shade of bleached oak.

Wicker furniture in the garden looks impressive and elegant, but it is worth noting that you will hardly be able to immediately create masterpieces that you saw in specialized stores without some practice. Weaving rattan is a rather laborious process.

For a start, it is best to practice on small objects, for example, weaving a small stool or tabletop for a table. Only after successful practice can one move on to weaving more complex furniture, such as a chaise longue or swing.

Rattan in classic style

This calm and elegant one will liven up anyone. Rattan is perfect for him. V classic style accessories are very important. Each piece of furniture is worth laying out soft pillows in tender pastel colors or cover your furniture with a cream blanket or woolen blanket to keep you warm on chilly summer evenings.

There are no special requirements for creating an interior in a classic style - there is absolute freedom of action. Furniture made in this style will look equally beautiful both in the garden and in the house.

Rattan furniture care

Rattan is not a moisture resistant material, therefore furniture made from it should be protected from rain. Fortunately, its lightness makes it less of a hassle. This material wears out over time, so it is worth taking care of the furniture regularly.

Contemporary garden furniture

Contemporary furniture on the street meets two hot trends in terms of form.

• The first is minimalism and geometric simplicity.
• The second is futuristic shapes.

Beautiful and stylish terrace with lovely modern garden furniture - everything you can dream of

Modern fluorescent furniture looks very interesting. She uses natural solar energy... During the day, it absorbs rays to emit a fabulous glow in the evening. Therefore, she can replace the lamps in front of the house. Modern furniture is worth buying in ready-made sets. They can be kept in one colors or bright duets.

Popular Crafting Materials

Modern garden furniture is most often made from durable and moisture-resistant plastic. The design of such models meets the hottest trends in our time.

Here are two types of material that have gained particular popularity:

1. Technoratang — great alternative vine or rattan. The reason is resistance to moisture and direct sunlight. Besides, modern furniture very comfortable.
2. Polypropylene Is a popular polymer material characterized by high mechanical strength, tolerates exposure to adverse weather conditions. By the way, it is also quite plastic in the production process, which sometimes leads to bizarre forms of furniture. The only drawback is that some polypropylene furniture is very light, which means that strong gusts of wind can compromise its stability.

Camping is the best way to relax and rejuvenate

And finally. In the article, we mentioned only the most popular and best-selling garden furniture for a summer residence, which can be made by hand.

You can try to create something different, no less interesting and useful. The main thing for this is to put in a little effort and effort.

Probably, the information received will be useful to you in your creative endeavors. Experiment and create, try to make what is already there a little better.

Furniture on garden plot necessary. Without these items of the garden exterior, it is impossible to relax with comfort and convenience. Furniture should be lightweight, durable and attractive in appearance. Wooden furniture will fit most naturally and organically into the garden area. It satisfies all of the above conditions, and in order for it to be combined with the rest of the design, you can design and make it yourself.

There is no material more suitable for garden furniture than wood. It is quickly processed and looks noble even without additional coating. In addition, wood is considered the most environmentally friendly material.

Externally, wooden objects in the suburban space look beautiful and interesting. The decor with ribbons, live plants and flowers, designer pillows or charming soft toys adds uniqueness and grace to them.

The combination of wood with materials such as stone or metal looks spectacular. For example, a bench or gazebo made of solid wood goes well with stone or metal accessories. A special charm possesses wicker furniture. She is not only very cozy, but also looks pretty.

The strength of solid wood furniture depends on the quality and type of raw material, as well as on correct assembly. Tips for choosing a material for work:

1. The most demanded in this business are beech and oak. They do not rot, serve for a long time and are highly durable.
2. Coniferous logs give off resin. If the wood is not degreased, the finished products will stain the clothes and skin of everyone who touches them. However, they are characterized by increased strength and durability.
3. Furniture made of spruce, pine and larch can be easily repaired, it can perfectly tolerate both rain and sun. Externally, objects from these rocks look aesthetically pleasing and attractive.
4. Another great option is teak... Teak is resistant to any climatic changes, it is not for nothing that its wood is used in shipbuilding. Teak furniture looks impressive thanks to the natural patterns on the wood.
5. Ready-made slats, bars, lintels and boards are the easiest material to work with.
6. Stumps and logs will help build unusual furniture with a minimum of effort and time. By showing imagination, you can create truly creative products.
7. For the manufacture of wicker masterpieces from flexible varieties of trees, bird cherry branches are suitable. They are pliable, soft and pliable.

Use our drawings to build your own sturdy and reliable garden furniture.

Instruments

Before starting work, prepare the necessary tools:

• jigsaw and hacksaw;
• screwdriver with drills;
• drill, hammer;
• tape measure, pencil, square;
• carpenter's glue;
• sander or sandpaper;
• fasteners and wrench;
• Bulgarian;
• varnish coating, paint, impregnation, brushes, rollers, spray;
• nails, screws, nuts and other accessories.

The material is required amount wood.

Design options

We present some options for wood structures that can be made with perseverance and dexterity.

Garden bench

The bench is irreplaceable in the garden. No one will refuse to rest after hard working days on a comfortable bench. And the realization that you are sitting on furniture made with your own hands will warm your soul and give you self-confidence.

Part marking	Quantity	Parameters, cm
A	Four	36,6*15*5
B	Two	56,5*15*5
C	One	96*15*5
D	Two	48,5*15*5
E	Two	76*15*5
F	Seven	140*15*5

Assemble the parts as shown in the drawing. Start with the legs. First connect parts A and B, to them attach the rail D supporting the seat. Part E is then attached. All rails are bolted together. The opposite leg is assembled in the same order. Next, part C is attached. The final step there will be a fastening of the strips F. Leave a gap of approximately one centimeter between them. Cover the finished product with two layers of varnish. Don't forget sanding between varnishes.

Where to gather for a family gala dinner during the warmer months? Of course, in the garden for a picnic. Here you cannot do without a spacious table, at which there is enough room for all friends and family members.

Part name and marking	Quantity	Part size, cm
# 1. Rail	Eight	245*9*3
No. 3. Bottom jumper	Two	153*14*3
No. 4. Leg	Four	85 * 10 * 3, cut angle 60
No. 5. Seat	Two	245*25*3
No. 6. Jumper under the table	Three	70 * 10 * 3, cut angle 75
No. 7. Emphasis	Two	110*10*3
No. 8. Bottom board	Two	220*10*3

The length of part # 3 can be adjusted according to individual preferences. It is better to fasten the parts with special furniture bolts. Nuts and screws can also be used. For aesthetics, we recommend screwing the bolts with inside tables and benches so that they do not spoil the appearance of the product. Sand the finished furniture and varnish in several layers.

A folding chair in the garden will never be superfluous. It is compact, convenient and does not take up much space. The folding chair is easy to carry from one place to another. You can put a child or a guest on such a chair.

For manufacturing you need details:

Dowels are installed in the sidewalls, due to which the chair will fold in half. The slots for them should be made in the vertical rails of the rear leg. Usually a folding chair is made with a reclining back. The angle varies from 15 to 35 degrees. A product made according to our drawing will have a back inclination of 35 degrees.

If there are children in the family, then the garden must have at least a small children's Corner... It is advisable to put a sandpit, a slide and a swing here.

It is about the latter that will be discussed. The parameters of the finished swing, which are shown in the following drawings, are small. But how much joy the baby will experience at the sight of a wooden miracle, made especially for him!

The width of the swing is 30 cm, the length is 40 cm, the height is 24 cm.To make, you need twelve slats, two of which will go to the back, five to the seat, two to the sidewalls, two are attached under the seat and one bar keeps the baby from falling ...

Don't forget to leave a couple of centimeters of sticks to process.

We associate sun loungers with the sea, sun and sand. But this piece of furniture can also be used in the garden. On a cozy wooden chaise longue, which we propose to make according to our drawings, you can sunbathe in the sun. And by covering the chaise lounge with a soft blanket and pillows, you can use it as an armchair.

The dimensions of the parts are indicated in the drawings:

Pre-grind all the bars, make the necessary holes. Pay close attention to every detail.

Lounger

A simplified version of a sun lounger is a lounger. Making it easier and faster. Prepare your tools and grab some wooden slats - the lounger will be ready in a couple of hours.

Parameters: height - 0.3 m, length - 2.2 m, width - 0.7 m.

Materials: boards 1.5 meters wide and 0.4 meters wide; planks for flooring; self-tapping screws.

Stages of work:

1. Sand the boards well.
2. Assemble the frame, attach the legs to it.
3. The width of the base corresponds to the location of the lounger. But he must not fail.
4. Attach the back from the side of the head. Its slope will be adjusted using the grooves in the frame. Make no more than four grooves.
5. The planks on which you will sunbathe are attached with self-tapping screws. To make your work easier, first make holes in the screw-in areas.
6. Before final assembly, coat each plank with a varnish.

Wicker furniture

It takes a lot of experience and preparation to learn how to create real masterpieces. Weaving furniture is a painstaking work. You can try your hand at making a round stool seat or table top.

Video - Wicker furniture: do it yourself

Output

At first glance, it may seem that it is difficult to make solid wooden garden furniture yourself. Of course, this will require a certain amount of physical effort and time. But the result that you get in the end will be worth all the effort.

Even the most modern exterior can become much more comfortable with garden furniture. Undoubtedly country furniture has differences with pieces of furniture intended for the arrangement of living quarters, therefore it can be made even from improvised means. It is enough to study a few tips, show imagination, perseverance, a little work and furniture will appear on your garden plot, which will become the pride of the owner and the envy of guests.

In this article, we will tell you how to make garden furniture with your own hands from wood, pallets, metal, demonstrate drawings, diagrams and photographs, as well as video instructions for making garden furniture.

How to choose material

In order for the pieces of furniture to blend harmoniously into the landscape, it is worth making a choice in favor of natural wood... To do this, you can use branches, trunks or tree roots, which will help create unique pieces.

Natural wood has a variety of shapes, which makes it possible to produce original furniture items with minimal processing. When choosing materials, you should be creative and try to see the unusual in ordinary things.

If you want to decorate your personal plot with not only fashionable, but also reliable items, take a closer look at a table with a base of concrete blocks, fastened with a cement mortar with further tiled cladding. To make the countertop, you need 5 * 10 cm bars, fixed with glue in a frame. Planks are attached to the holes that form the surface of the table.

Stylish and economical products can be obtained from flexible tree varieties. Nothing beats the beauty of wicker garden furniture. If you are not experienced in this process, stop at bird cherry branches, which are easy to handle and pliable.

Video

This is how furniture is made from technorattan:

Varieties of designs

One of the most popular options for garden furniture is considered workplace gardener. Even if you are not an avid gardener, it will be much more difficult for you without an equipped table.

If you prefer original solutions, you can make a picnic table in an unusual style.

On a fine summer day, a gazebo with folding chairs and a table, which are not only comfortable, but also compact, will be indispensable. Variety will be brought into the landscape by bright modular structures, such as benches. For frequent family vacations, be sure to take care of the little ones and make a table and chairs for them the right size.

Nuances

1. Novice carpenters in the furniture industry should give preference to more economical options not too difficult to execute. That is, those for the manufacture of which you do not need to perform difficult connections. Make a choice in favor of wood, which is the easiest to process and purchase at a relatively low cost, and it is much more pleasant and easier to work with it;
2. Semi-hard, hard and soft types of wood, as well as materials based on wood, are ideal for practical execution of pieces of furniture. Rounded pine blanks are often used as legs, and for seats and backs - boards with a section of 2 * 12 cm, armrests are optimally made of 5.5 * 3.5 cm bars;
3. You can start the process only after you have drawn up a sketch, either drawn or in the form of a drawing. Before starting work, decide on the dimensions of the future product, and stock up on the following tools:

• bolts;
• screws;
• PVA glue;
• self-tapping screws.

Also, as a support for products, you will need metal corners, pipes, channels and other materials at hand that are suitable for the furniture you have chosen. At the same time, make sure that all fasteners are completely recessed into the material, in otherwise you could hurt yourself when using the furniture.

Country wood furniture must be treated with antiseptic and protective compounds that will protect parts from decay and abrasion. If you do not yet have experience in the manufacture of furniture, when making seats, follow the proven technological advice: the product should have a slight inclination towards the back, which will make the use of a bench or chair as comfortable as possible.

In order to make a piece of furniture from improvised material will help you old barrel, which in the future will become an unusual chair with a back. V short term you can build a bench using boulder stones as support legs and wooden board as a seat. To build such a bench, you will need tools:

• a plane for processing boards;
• drill with diamond attachment;
• anchor bolts.

Having processed the board with a planer, the boulders are adjusted to the required height, having previously dug a hole and arranged at the bottom sand pillow... It is necessary to drill holes for anchor bolts in the board and stones.

The final step is to tighten the bolts and coat the surface of the board with a protective lacquer layer.

The embodiment of unusual ideas

Furniture made on site

To create interesting objects for decorating the landscape, you can decorate the table, chairs and benches with beautiful original branches. Such furniture will become a wonderful and appropriate element of the garden exterior and will not leave indifferent any of the guests.

It is not necessary to use treated wood to create beautiful furniture, with a little imagination, you can successfully apply forked tree trunks without pre-treatment.

Another option for making a table for a summer residence is using a large cut of the trunk as a support and a horizontal cut of the butt as a cover. The horizontal cut is fixed to a shield made from parts of the trunk. To give reliability to the structure, it must be propped up with logs, whose top has been previously hewn, and fixed on the supporting pillars.

Pallets are also called pallets. They are enough trays large sizes which usually remain from building materials... If you do not have the funds to buy garden furniture and even blanks for it self-made, then we suggest that you use pallets for these purposes. You can buy them at a very affordable price in hardware stores. There is enough of this good.

Boards in pallets are not stacked closely, but at a distance equal to half the width of the board. Pallets also have sides with a height of 10 to 14.5 cm. There is no single pallet size, but in our country there are usually 100 × 120 cm and the European standard - 80 × 120 cm (they can have a continuous laying of boards).

Regardless of which piece of garden furniture you have to make, they must be pre-processed. First, you need to remove dirt from the tree, then dry it and sand it.

In some cases, in order to avoid getting a splinter on preparatory stage pallets paint paintwork... But, most often this action is performed at the finishing stage of furniture manufacturing.

It is not enough to buy pallets to make garden furniture. You will also need thin, not very long nails. In addition, you need to purchase furniture fittings, such as wheels, handles, etc.

You will also need varnish / paint, glue, glass, small lighting and fabric. The composition of this additional set, of course, depends on the design of the furniture.

Making a coffee / dining table

The simplest pallet garden furniture options are dining and coffee tables. To make them, you just need to connect 2 pallets by placing them on top of each other and connecting them with nails. A fiberboard sheet, glass or thin wood can act as a tabletop. The coffee table is ready for this.

For the convenience of moving it on the terrace, for example, you can screw the wheels to the table.

More pallets are needed to make a dining table. For the table top, you will need 2 pieces, and for the manufacture of the legs, you will need 1 pallet, which you will need to saw into 4 parts, stretching it vertically and nailing it in the corners.

Another option for the legs is to take 2 pallets, place them vertically and nail them whole on the sides. This will create a large dining table. If this table height is not enough, then you will have to stack 1 more row of pallets.

If you have the skills in woodcarving, then you can make the legs the shape you want.

The relaxation area can be decorated with sun loungers. To make them, you will need 3 pallets - 2 rectangular and 1 square (it will be 10 cm wider than the rest).

Place rectangular pallets together and nail them together. Initially, pallets need to be sanded and then painted. Now you need to make the back of the chaise lounge. At this stage, you will have to work a little more. Disassemble the wide pallet: remove the bottom layer and partly the middle one (1-2 pieces of it should remain). The basis will be upper layer pallet. Remove 2-3 boards from the backrest blank. They will still be useful to you, therefore, the pallet should be disassembled very carefully, nothing needs to be broken. Saw one of the planks you removed in half.

Now set the square pallet at an angle to one of the sides of the rectangular pallets. This will form the back of your chaise lounge. Fix it with the screws removed from the pallet earlier. On ready product you can throw in a thick fabric or mattress.

Making a sofa is very simple. For its base, you will need 3 square pallets and 2 rectangular ones. As sidewalls, you can use 1 pallet, previously sawn into 2 identical parts so that you get 2 thin pallets. Whole pallets can act as a backrest. For fastening, thick screws / nails, metal corners are used.

Now it remains to close the sofa with plywood, which, as an option, can be glued. Sand the sofa and paint it as intended.

Use foam, such as a seating mattress and back cushions. So, you get a cheap, but very original sofa.

Wood furniture is environmentally friendly. It is distinguished by its conciseness, beauty and relative ease of manufacture. Not only a man, but even a woman can cope with this task. Garden furniture can be made in many different ways.

It is easier to work with ready-made, pre-processed slats, bars and planks. There are both simple and complex circuits making furniture from wood. To organize a recreation area, it is better to make benches with comfortable backs; for a feast, you will need a whole set. It is very easy to make a swing out of a bench without legs. To implement these ideas, you need to connect imagination, have basic carpentry skills and acquire the necessary source material.

Needles are not suitable for making furniture. Resin is released from it, which will stain the clothes of tourists. If you have only pine needles at your disposal, then before starting work, it must be de-resinated.

To do this, you can use one of the compositions:

• Mix acetone and water in a 1: 4 ratio.
• Mix acetone and rubber soda in a 5: 1 ratio.

The surface of the tree must be treated with one of the solutions, and then rinsed with water and dried. Then the tree is treated with antiseptics and varnished.

Monumental shops can be made very quickly. To do this, you will need several logs, depending on the required number of benches. The easiest option doesn't require a lot of intelligence - just lay a large log and throw a few pillows on top of it. But perhaps, for arranging a garden / gazebos / terraces / patio, it is better to come up with something more aesthetic and original.

For the organization dining area hemp can be used in the garden. Small hemp will act as chairs. And for the table, you will need a more massive stump. To make eating conveniently, the stumps need to be fixed. For example, they can be dug into the ground or placed on a flat surface - a small area on a lawn or a pedestal on a terrace.

For the convenience of those sitting, sew / order bright hemp pillows. As a table top you can use wooden shield... In addition, decorate the back and armrests for hemp with snags and branches.

The cut of a tree can serve as an original table top and even a seat for a chair. For example, saw cut larger diameter can be installed on a stump with a smaller diameter. They can be secured with waterproof glue or regular nails.

Of the tools you will need:

• boards;
• hacksaw;
• sandpaper;
• electric saw;
• wood varnish;
• hammer and fasteners;
• tape measure and pencil.

Remove the resin from the wood first. How to do this has already been mentioned above. Before placing on a tree stump, the stool cover or table top must be sanded. You can make such a simple set right in the garden or in the gazebo. If it will be installed in the garden, then take care of mounting the beach umbrella in the table, for example.

Metal is more durable than wood, so it is better suited for making garden furniture. However, working with it is much more difficult than with a tree. For the manufacture of garden furniture, thick-walled duralumin / steel tubes are usually used. There are two options for connecting metal furniture elements:

• Nuts / bolts.
• Welding seam.

Duralumin cannot be welded, therefore it only needs to be connected with screws / bolts.

Table / Bench / Chair support parts can be made from shaped pipe square section. This material has an affordable cost. It can be purchased at the household. shops and construction markets. In skillful hands new life acquire tubular metal elements of baby carriages, duralumin cots and even outdated water pipes.

It is easy to assemble furniture from metal if you use bending elements from pipes or connect their straight segments. To bend the pipe without damage, make a simple flexible tool from an automobile brake disc. You can look at how it looks a few more times.

To bend the pipe follow these instructions:

1. Plug the end of the pipe with a plug, fill it with sand, and then plug the other end with the plug.
2. Place it in the folding device, pinch with the pin and tab on the disc.
3. Bend the pipe to the desired level. This requires a lot of effort.

To make the bending process easier, heat the bend point red-hot with a blowtorch.

The parts must be the same, so you also need a plaza. It is a sheet of plywood / cardboard, on which the contours of a piece of furniture are applied. After making the bend, check the pipe on the plasma for compliance with the contours. If you should have several identical parts, then they will also need to be checked for coincidence with each other.

If you have connected furniture elements by welding, then they will have to be processed. This can be done with a grinder / file. Front finishing metal frame, it must be cleaned of rust, if any, and then polished.

To make the simplest frame, you will have to prepare the following tools and materials:

1. Profile tube 20 × 40.
2. Bulgarian.
3. Welding machine with electrodes (No. 3).
4. Grinder / file.
5. Sandpaper.
6. Square / meter.

The dimensions of the bench depend on your needs. Cut the pipe according to the measurements:

• 4 children for the frame.
• 1 children for the cross member.
• 4 legs for legs.
• Paired frame parts: 2 - with a length equal to the width of the bench and 2 - with the length specified in the scheme.

The length of the legs should be determined depending on the height of the bench.

Assembling a metal bench

• File the surfaces where the weld will be. Lay the individual frame pieces on a flat surface in the same way they will be welded. The connections must be made at a 90º angle. You can check their evenness with a square.
• Mark the middle of the long sides of the frame and weld in the cross member.
• In inner corners the frame needs to be welded on the legs. They must be welded perpendicular to the plane of the frame. This is important, otherwise the frame will be uneven and the bench unstable.

The seat can be made of MDF / thick plywood or planks. If you want the bench to be made entirely of metal, then cut the required number of identical pieces of pipe / strip steel for the seat. Weld / screw these elements onto the frame.

In accordance with this pattern, you can make a frame not only for the bench, but also for the chair / table / stool. Just resize the frame and consider additional elements / decor.

Bench frame made of pipes bent at right angles in two planes, shown in the diagram.

To work you will need:

• Bulgarian;
• pipe bender;
• duralumin / steel pipe Ø22 mm;
• measuring tool;
• self-tapping screws / pins;
• wooden bushings.

The whole frame must be bent out of a pipe of the appropriate length. This is done according to the measurements and the sketch, and is checked on the plaza, as in the previous case. If you have only short pipe sections at your disposal, then they need to be bent in parts, and then connected into a single structure. For this, bushings are driven into the ends of the joint. They must be fitted so that they fit tightly. Then drill holes for self-tapping screws at a distance of 1 cm from the cut and fix the parts. The fastener is screwed into the sleeve through the hole made.

The seating frame can be assembled from blocks. In this case, it is attached to the frame with self-tapping screws and corners. In the same way as in the previous case, a table / stool can be made from this sketch.

To make a stool, bend metal parts in the shape of the letter P. This is needed for the back, and also the legs. The front legs and the seat frame are made according to the same principle as the bench - bending is done in two planes. As in the previous case, you can use pipe sections, bend them in detail, and then connect them with bushings.

The front and back of the chair are connected with a welding seam or screws / self-tapping screws.

After making the frame, it needs to be processed and painted. So, you can create an imitation of forged furniture, which looks very beautiful and noble. To make a soft seat to the base, screw the plywood, previously sheathed with foam rubber and upholstered furniture fabric, onto the self-tapping screws with the corners. Make a padded back in the same way.

By increasing the length of the frame and soft parts, you get a soft garden sofa.

If you master the manufacture of these simple metal pieces of furniture, then in the future you will be able to make something more complex according to the corresponding sketches / drawings.

It doesn't matter which option you choose for yourself, in any case the result will be exclusive. And furniture, created independently, will constantly delight household members, giving warmth, comfort and extraordinary beauty.

Video

Photo

Schemes and drawings

Garden furniture options are provided in the diagrams and drawings: