The combined bathroom and toilet rooms are comparable in terms of the cost of repairs and the purchase of plumbing to the re-equipment of the kitchen. For them, high-quality modern materials and products are purchased. The wall-hung toilet set with installation has surpassed standard floor-standing designs in popularity due to its compactness, original installation system and ease of use.

How to choose an installation for a wall hung toilet?

outlets offer various types products from Russian and foreign manufacturers. Installing a hinged system in the toilet saves space for washing machine, sinks, boiler. There is an additional area for decorating the room. But before you buy an expensive product, you need to familiarize yourself with its qualitative and quantitative characteristics. Without studying the instructions for installing a wall-mounted toilet bowl, various troubles are possible for installation - from water leaks to a complete failure of the device.

The device is a metal frame on which plumbing is attached. There are installations with a hanging toilet bowl and a button. Another option is an automatic flush without a separate button. When choosing between them and a floor toilet, first of all, you need to pay attention to the dimensions of the products. The former stand 100-150 mm closer to the wall than the latter with a tank. Strictly regulated dimensions do not exist. Each manufacturer produces products based on the needs of the consumer.

Second important point- performance of the flushing system. Habitual plumbing in this regard is not always reliable. It is characterized by the following problems:

• the occurrence of the button;
• float failure;
• weak water pressure;
• valve clogging.

The modern design is more reliable, so manufacturers give a ten-year operational warranty without fear of failure. The system may break. There is no access to it, since it is covered with drywall or tiles. Engineers took this into account and created a shutter release button.

The advantages of a wall hung toilet with installation are:

• reduced fluid flow while maintaining flow power;
• pneumatic actuated button activated with air system crushing;
• the noiselessness of the tank, hidden behind the wall and foam.

Ease of cleaning is an important factor in operation suspended structure. A bathroom with a tank is often placed in a secluded place. Therefore, the approach to it is difficult. It is difficult to wash the back of the product, corrugated hose drain, it is inconvenient to shut off the water supply tap. From all these problems suspension system spared. The apparent unreliability of attaching the wall-mounted toilet to the installation is erroneous. According to technical data, it is able to withstand a mass of up to 0.5 tons (average weight of a person is 70-80 kg).

Read also: Sandwich chimneys out of stainless steel: design, installation features, dimensions

The only disadvantage of a wall-hung toilet with an installation is its price. It is several times higher than that of a conventional bathroom. In Moscow, you can buy a wall-mounted toilet bowl with an installation kit at a price ranging from 13,000 to 25,000 rubles. Taking into account the daily water consumption, operating costs, the durability of the structure, it must be assumed that expensive products will pay for themselves faster than a floor product. The cheapest product is not equipped with a flush button. Its cost is from 11 to 12 thousand rubles.

The disadvantage of installations is the difficulty of repair in case of water leakage. Therefore, which hanging toilet with installation is better to choose , the buyer decides. First of all, you need to pay attention to the manufacturer. The ranking of hanging toilets for the toilet is headed by several companies. Among them:

• Geberit;
• Grohe;
• Cersanit;
• Tece;
• Villeroy & Boch.

The main difference between products from different manufacturers is the presence of a water release button, which can be designed in traditional form or equipped with touch controls with innovative odor removal. The frame may include a carbon filter device. Grohe has added a backlight key. Models with two buttons for descent of different amounts of water are sold. One delivers 3 liters and the other 6 liters.

Installation costing from 6 thousand rubles involves the use of low-quality metal fittings, pipes and seals. Such a frame may soon deform, sealants leak. Therefore, such “savings” will lead to even greater losses in repairs, not only in your apartment, but also in the one located on the floor below.

How to install a wall hung toilet with installation?

According to the type of fastening, the technical product is frame and block. Last option includes a flat tank, a drain button and fixing elements. The bathroom is isolated on the floor or wall. The advantage is a lower price compared to a frame structure. The disadvantage is that the block must stand on the main wall. Drywall, foam block or brick partition in one brick will not withstand the load. For zoning the area, a frame type of fastening is suitable. A corner installation for a wall-mounted toilet, a free-standing partition, a niche for a cistern with water supply lines - all these are options for the frame.

Read also: Water floor heating system: materials and components, do-it-yourself installation

TECE launches a reinforced installation for a wall-hung toilet. Special strength and rigidity are obtained due to the double frame. Geberi has improved the support of the structure. In terms of cost, they are about the same. Installation can be carried out even on a non-main wall, or when there is a large distance from the partition to the toilet due to heating and water pipelines passing through the floor. A practical example for a combined bathroom and bathroom is a frame universal installation of a hanging toilet (pictured).

The dimensions of such a product are not regulated by the rules. It is assembled based on specific planning conditions. Individual nodes may be located in different parts premises, i.e. where it is convenient - in the corner, below, behind the partition, and even in different rooms.

The block system is less universal. It can only be fixed to the main wall. Repair, replacement of defective parts, installation of an additional structure are difficult tasks. However, standard dimensions of bathrooms have been developed that correspond to the height of a person in the “sitting” position. The width of the system is between 300-400 mm. The depth and height of the installation for a wall-mounted toilet bowl, respectively, are 500-600 mm and 300-500 mm. Insignificant differences in size in height are provided for people of different heights. But they do not cause much discomfort when using.

Do-it-yourself wall-mounted toilet installation

Installation of equipment does not require special knowledge and skills, the use of complex tools. But if there is no experience with adjustable wrenches, sealing materials, then it is better to seek help from professionals.

You need to start by taking measurements from the floor surface to the edge of the frame pipe, taking into account the height of the bowl, but not more than 400 mm. If the height is greater, then you can reduce it by adjusting screw device. The standard installation width for a wall hung toilet is 500 mm. The most common variant with a size of 10 mm.

The level checks the position of the system horizontally and vertically. The frame should be fastened at the same distance from the wall at the main points where holes are drilled and dowels are inserted. Then proceed to the connection of the sewer pipe, the supply of water to the drain tank. The plumbing and the tank are connected by a stainless steel tube. Rubber hose is not suitable for this purpose. It is imperative to provide for the installation of a shut-off valve in the place where the liquid is supplied in front of the drain tank. It is needed to immediately shut down the system in case of depressurization. Polyethylene is used for sewerage corrugated pipes. Then the frame structure is attached with its connection to the water supply. All communications after installation are checked for tightness by repeated draining of water.

The usual floor-standing toilets have been replaced by suspended structures that do not take up floor space and look more modern. Not surprisingly, wall-mounted models began to displace traditional products from the market. Installation of a suspended structure is more difficult, takes more time and costs more, but you can save money if you consider such an option as installing a wall-mounted toilet with your own hands.

Internal arrangement and principle of operation of the structure

If you understand the design features of the product, it becomes clear how to install a wall-mounted toilet.

The design of the wall product is such that only the toilet bowl is a visible element

The first element is a strong steel frame, which is the basis to which the visible part of the structure is attached - the toilet bowl. It is with its installation that the installation of a hanging toilet begins. The frame is securely fixed to the wall, also fixed to the floor - as a result, it must withstand the weight of a heavy person.

Accordingly, to weak walls (for example, from drywall) this design mounting is unacceptable, as the wall simply will not stand it. The frame is equipped with a device that allows you to adjust the height (400-430 mm), on which the bowl of the product is mounted. It is suspended from the frame using special pins - this is the main fastening of the hanging toilet.

Often two installations are installed at the same time - for the toilet and for the bidet

The second element is a plastic drain tank hidden in the wall. Its shape differs from the traditional one, since the container must fit in a narrow design. It is mounted in a steel frame and insulated with a special material that excludes the appearance of condensate - styrene. The front wall of the tank is equipped with a cutout for mounting a trigger button device. In case of repair, this cutout is also used. Almost all modern cisterns involve drain dosing: for example, the volume of drained water can be either 3 liters or 6 liters, depending on the purpose.

Cisterns of flat configuration are fixed inside the installation

The third element is the toilet bowl, the only visible and actively exploited part of the structure. Its shape is traditional, oval, although designer models come in both round and rectangular configurations.

There should be no problems with fasteners, since a set of necessary parts and tools and installation instructions are included with the product. Sometimes it is required to additionally purchase a Teflon tape, a polyethylene outlet, a flexible hose, and studs.

Installation technology for installation

Mounting a wall-hung toilet with a special frame installed in the wall is more expensive, but more reliable and faster.

The installation must be mounted to the floor and the main wall

Installation of a steel frame - through special holes it is attached to the main wall and floor with dowels. At the installation site, sewer and water pipes are removed. The frame (installation) should be checked for evenness using a level. It should be clearly parallel to the wall to which it is attached. At this stage, the installation height of the hanging toilet bowl is also set - 40-43 cm. It depends on the height of the apartment owners.

The height of the toilet bowl is adjustable during installation

Water supply to the tank. It can be flexible or rigid. Experts insist on a hard option, as it lasts much longer. While the liner is being installed, the valve in the tank is in the closed state.

At the time of work, the drain of water from the tank should be blocked.

Connecting the toilet to the sewerage system. The toilet outlet is inserted into the sewer outlet, the connection is fixed with a corrugation. After installation, it is necessary to test the system - make a test drain. To do this, the toilet bowl is completely screwed to the frame for a while. Then it is removed again, as it is usually installed at the final stage.

Many installation kits connect to sewer pipe without the use of corrugations

Sheathing of the working area with sheets of drywall. For the plumbing unit, sheets of waterproof double drywall are chosen, more durable than usual. The panels are mounted to the frame and a metal profile, which is mounted on the wall. The instructions supplied with the product contain detailed diagram cutting material with places to cut the necessary holes. There can be two options for sheathing: for the area of ​​the entire wall or just to close the installation. In the second case, an impromptu shelf will appear above the toilet bowl.

An impromptu shelf above the toilet and bidet can be used for decor or the right things

Partition wall cladding ceramic tiles or panels similar to the finishing material of the bathroom.

Wall cladding behind the toilet should be in harmony with the rest of the room.

The final stage is the installation of a wall-mounted toilet bowl, specifically its bowl. It is hung on the allotted part of the steel frame using two studs.

Lined drywall sheets cover the installation and cistern, leaving the toilet bowl and flush button

Particular attention should be paid correct installation installation, as the correct execution of subsequent work depends on it.

Installation of a toilet bowl without installation, on a concrete base

Sometimes they are interested in how to install a hanging toilet without installation. Of course, installing a toilet on a frame can be replaced with a cheaper option - mounting on a do-it-yourself concrete base.

The flush cistern is installed in two ways: either mounted on the wall with the withdrawal of the drain buttons, or placed in a standard way above the toilet bowl in a manufactured base.

Scheme of fastening a wall-mounted toilet bowl: 1 - 2 rods mounted in the wall; 2 - monolithic concrete base; 3 - drain pipe

Consider the most economical option.

To install, you need to prepare:

• about 40 liters of concrete M200;
• formwork boards;
• nuts, washers, wood screws;
• 2 threaded rods 2 cm thick (length from 50 to 80 cm);
• a piece of plastic pipe (length - 8 cm or more, diameter - 11 cm);
• drain coupling;
• silicone sealant.

Start by fixing the rods in the main wall. In the future, a toilet bowl will be “planted” on the releases of the rods. You get a fairly stable design that can withstand a weight of 400-500 kg.

The dimensions of the concrete base are calculated taking into account the further dismantling of the formwork

Install formwork. Calculate the distance between the holes for fasteners, mark the fastening points on the formwork.

Calculate the length of the rods: sum up the thickness of the recess (about 15 cm), the distance from the toilet bowl to the wall. To fix the rods in the wall, a chemical anchor is used - a special glue for concrete.

After mounting the pins and installing the formwork, they try on the toilet bowl. Holes for fastening must coincide with the outlets, the outlet - with the drain of the coupling.

The concrete base will finally harden only after 2-3 weeks

Start concreting, supporting drainer foam. The result is a monolithic block with a fixed open sleeve and outgoing pins.

The concrete base must include the pins for the toilet bowl, the outlet of the drain coupling and the space at the top for mounting the cistern

You should not think about how to install a wall-mounted toilet on a prepared base - the subsequent steps do not differ from installing a conventional floor-standing toilet: connect the drain, seal the connections, install the bowl on the pins, tighten the nuts. The drain tank is fixed above the toilet bowl.

The concrete base and drain pipe can be covered with drywall sheets, leaving an opening for access to the drain tank

Such a do-it-yourself installation of a hanging toilet bowl will save the family budget, since an expensive installation is not required.

Do-it-yourself installation and fastening of a hanging wall-mounted toilet

Self-installation of a hanging toilet. Features of the stages of installation on the installation and concrete base. Video instruction.

Instructions and tips for installing a wall-hung toilet with installation

Suspended plumbing fixtures are gradually gaining popularity, especially among owners of small bathrooms. However, not everyone likes hanging toilets - outwardly they seem unstable and unreliable. This impression is misleading, because the installation of a wall-mounted toilet is carried out using an installation system that is hidden behind the wall finishing material. Let us consider in more detail the advantages of suspended plumbing objects and get acquainted with the instructions for their installation.

Benefits of wall hung toilets

1. compactness . The space of the bathroom is freed up due to the lack of a drain tank - it hides in the wall along with the rest of the communications. Thanks to the resulting void under the toilet, plumbing seems weightless, this technique visually lightens the interior and makes it visually more spacious.
2. Modern style . Suspended plumbing is a relatively new invention, its installation immediately indicates that the owner of the house is following the development of technology and keeping up with fashion trends.

• Versatility . It doesn’t matter if you are only changing the toilet bowl or completely renovating the furniture and bathroom equipment – ​​a hanging toilet bowl will always be appropriate and will make the interior of the bathroom elegant and concise.
• Practicality . Cleaning the room is now much easier. The installation of the "warm floor" system is also facilitated. Floor tiles placed without violating the integrity of the ornament.

Choosing and buying a toilet bowl with installation

The main condition for purchasing an installation is that it must match the model of the toilet bowl you have chosen. Often, wall-hung toilets are equipped with an installation system initially, it is best to prefer this particular option.

The installation must match the size of the niche in which it will be placed.

Installations are of two types.

block - fastened to the wall using conventional anchor bolts, which are the main support of the entire structure.

Framework - is a frame on legs, thanks to which the height of the toilet is adjusted. The frame is attached in four places. It is possible that all four mounts are fixed on the wall - this mounting method can only be used in the case of solid walls.

If the wall is not stable enough, choose an installation with two mounts on the wall and two on the floor. The last two fasteners bear the main load.

Pay attention to the equipment of the device. In a favorable scenario, you will receive the main part (blocks or frames), fasteners, flush keys, noise insulation, flush tank and adapter.

Stages of installation of a toilet bowl with installation

1. We are marking the walls. We draw a line - the central axis of the future system. We calculate the distance between the installation and the wall, which will house the sewerage and water supply. We mark the mounting points of the installation and the location of the tank.

• Provide a technological hatch just below the drain button. This will greatly facilitate the maintenance of the tank and its repair if necessary.
• Use modern flush buttons that save water. It can be two separate buttons, one of which drains the full volume of water in the tank, and the other half. Another option is the presence of "Start" and "Stop" buttons.
• Consider the location of the drain button relative to the tile elements. Design the button either strictly between two tiles, or in the center of one of them.
• The top edge of the toilet must be no higher than 45 cm from the floor and no lower than 40 cm.
• The thickness of the wall hiding the installation system should not exceed 7 cm.
• A standard distance of 18 or 23 cm is maintained between the mounting holes of the toilet bowl.
• Control the correct installation at all stages of work. This will help to avoid gross errors during installation and problems during the operation of plumbing equipment.

The toilet bowl installed according to all the rules with the installation is able to withstand a load of up to 400 kg! If you doubt that you can do all the work correctly and efficiently, we advise you to resort to the help of qualified specialists. Well, to save the budget, of course, will help self-assembly installation systems. Feel free to use technological and design know-how to create an original and practical interior.

Installing a toilet bowl with installation: detailed instructions and tips

We offer detailed instructions And helpful tips installation of a wall hung toilet with installation.

Installing a hanging toilet with installation: the subtleties of installation

Toilets with installation are real aristocrats in the world of plumbing. These are convenient and compact devices, usually distinguished by their magnificent design and the price that is not sparing at all for its owner. In addition, the installation of a wall-hung toilet is a rather complicated task, it requires very careful execution.

And yet, the ranks of adherents of toilet bowls with an installation are steadily growing. Many home craftsmen, after studying the recommendations and instructions, successfully cope with the installation of this difficult structure on their own.

It is only important to correctly perform each stage of installation work.

How is a wall hung toilet?

A hanging toilet is much more complicated than a conventional compact or monolith. The installation is called a solid metal frame. This frame is installed inside the wall niche and securely fixed to the wall and to the floor.

The flat plastic tank is already attached to the frame. Then the necessary communications are brought to the niche, finishing is done and the toilet bowl itself is hung.

The toilet remains outside, and the rest of the filling remains hidden in the wall. A flush button is also displayed on the wall, which is usually located on the wall above the bowl. Even from this brief description, it can be understood that the installation of such a device is a laborious process.

But still, the model with the installation has many advantages:

• aesthetic appearance and attractive design - the bowl seems to float above the floor;
• compact dimensions leaving wide open space to accommodate the toilet in both small and large bathrooms;
• the absence of a leg makes it much easier to clean the room;
• the design of the installation is universal, it is possible to choose some elements to your taste and budget;
• frame and tank failures are extremely rare, and repairing or replacing the drain button is usually not difficult.

Among the shortcomings, the high price should be noted. Including installation costs, the cost of such a toilet can be twice the cost of a standard floor model.

However, manufacturers take into account the growing popularity of suspended plumbing, so relatively inexpensive models have appeared on sale. Another drawback is that the tank and frame, hidden in the wall, are not too accessible for repairs.

In the event of a major breakdown, you may have to turn the entire wall around and redo the finishing work in that area.

Materials and tools

To install a toilet bowl with the installation of a built-in toilet bowl, you must purchase the following items:

• installation frame with a plastic tank;
• a bowl of a hinged toilet bowl;
• flush button;
• toilet studs;
• a set of nozzles for connecting a bowl with a tank, etc.

The installation is usually supplied complete with a flat plastic tank, as well as adapters, nozzles, fasteners and a flush button. The kit usually includes a special material that protects the structure inside the wall from the effects of condensate, and also reduces the noise level from the operating tank.

When buying, you should carefully check the kit in order to immediately purchase the missing items. The toilet bowl is also purchased separately. The dimensions and configuration of the installation, as well as other details, are standardized, so they can be changed if desired.

For example, you can choose the new dual flush button, which saves water.

To complete the installation, you will also need a number of tools, primarily a hammer drill and concrete drill bits that match the fasteners. Need also building level, ring spanners, tape measure, marking pencil, drywall cutting knife, etc.

The procedure for installing a wall-hung toilet

Schematically, the procedure for installing a toilet bowl with an installation can be represented as a series of basic steps:

• Make a niche in the wall of a suitable size.
• Bring the sewer to the niche.
• Perform installation of the installation frame.
• Lead to the place of installation of the cold water supply pipe.
• Connect the toilet bowl.
• Close the niche, install the flush button and finish.
• Hang the toilet by connecting to the tank, as well as to the sewer.

You will also need a certain amount of drywall, both for installation and for finishing works.

Each stage of the installation of a wall-hung toilet requires close attention. The service life of the device, the number and nature of breakdowns largely depend on the quality of the installation work.

The results of even minor errors made during the installation process may not become apparent immediately, but only during operation. Repairs can be very costly and time-consuming, so it’s better to install all the elements of this device right away than to redo it later.

Niche for installation

To create a niche and install an installation, only walls with an appropriate bearing capacity. The installation is able to withstand a weight of about 400 kg, and part of this load falls on the wall. Therefore, it would be unreasonable to put a wall-mounted toilet on a drywall wall, it can simply collapse.

So, to install the installation, you need to hollow out a niche in the wall with the following parameters:

Sometimes depth requirements are not easy to meet. In this case, the niche is made to the possible depth, and its disadvantage is hidden with the help of drywall and finishing.

Thus, there is space for experiments in the field of interior design. For example, you can make a built-in wardrobe in the space between the ledge that appears and the wall, or hang open shelves there.

But the idea of ​​​​just putting the frame along the wall, and then completely sheathing it with drywall does not make much sense. In this case, it is easier and cheaper to put an ordinary compact in the same place, which will take up the same amount of space or even less.

Upper floor residents apartment buildings sometimes installed in the niche of the fan riser. At the same time, a part of the fan riser is cut off and an air valve is installed where the outlet to the attic is located.

In some bathrooms, a niche for communications is provided for by the project. It can also be used to install the installation, but some modifications may be necessary, for example, changing the position of the water pipes and moving the sewer riser.

If the home craftsman does not have experience in performing such operations, it is better to consult with a specialist or even entrust him with this part of the installation work.

Sewerage supply

Before installing the frame, it is necessary to take care of the correct supply of the sewer pipe to the installation site. You will need a pipe with a diameter of 100 mm. It should be laid as close to the floor as possible, while it is imperative to maintain the correct slope.

The connection point must be 250 mm from the center of the wall niche. An oblique outlet with an angle of 45 degrees is put on the horizontal part of the pipe. After completing these operations, you can proceed with the installation of the installation.

Installation of a frame with a tank

Four points are provided for mounting the toilet installation. In two places the legs of the frame are fixed to the floor, and in two more places the frame is fixed to the wall with brackets. In this case, it is imperative to use the building level so that the structure is perfectly level both vertically and horizontally.

If the installation is installed even with a slight distortion, interruptions may occur in the operation of the internal mechanism, which will lead to an early breakdown of the structure. To align the vertical position of the frame, use adjustable legs.

The horizontal position is set using wall fixings, whose position can also be changed as needed. Once the position of the installation is accurately aligned and fixed, it can be screwed to the wall. To make the frame more stable, the legs can be additionally cemented.

A screed layer 20 cm high will be sufficient, but this measure is not mandatory.

At the bottom of the installation there are several holes for further installation of the hinged bowl. The distance between the floor and these holes should be approximately 300-400 mm so that the toilet bowl can be hung high enough from the floor. Special studs should be installed in these holes.

They are inserted all the way into the wall and secured with special nuts. The studs are designed for subsequent hanging of the toilet bowl.

Connecting communications

You should start by connecting the sewer. Typically, the installation is completed with a special black outlet designed for this connection. It should be fitted to the sewer pipe. The other side of the outlet is attached to the installation with special clips.

Connection to the water supply is made on the right or left side of the installation. The water pipe is connected using the already installed in the structure threaded connection.

Ordinary flexible hoses can also be used to bring water to the tank. This is an easy-to-install and low-cost option, but hoses have a shorter lifespan than pipes, so complex repairs must be considered to replace them.

At this stage, it is necessary to check the reliability of the connection of the tank with the plumbing system. To do this, open the water supply valve, which is located inside the tank, and fill the container. All connections are then checked for leaks and repaired if necessary. It is not necessary to drain the water.

Checking the sewer connection can be done as follows: put a bowl on the studs and perform a test flush without fixing the structure.

After that, the bowl should be removed from the mount, check for the presence or absence of leaks, and then continue installation.

Finishing work

If the installation is installed correctly, and the tank does not leak, you need to sew up the niche with a sheet of drywall and perform finishing work. It is recommended to take a double sheet of special moisture-resistant drywall. Ordinary drywall will soon be damaged due to contact with condensate.

To correctly cut all the mounting holes in the sheet and not spoil the material, use a template for cutting. Typically, such a template comes with the installation.

In the bathroom, the walls are most often tiled with ceramic tiles. TO further work installation of a wall-mounted toilet bowl can only be started after this stage is completed.

It will not be a mistake to even completely complete the renovation of the bathroom, and only then proceed with the installation of the wall-mounted toilet with the installation.

Installing a wall hung toilet

This stage can be called the simplest, since the bulk of the work has already been completed. But first, it is recommended to wait until the tile adhesive layer has completely dried. Perform the installation of the toilet bowl as follows:

• Adjust the dimensions of the outlet of the drain tank, which should protrude 50 mm beyond the wall.
• In the same way, cut the pipe intended for sewer drain.
• Install the pipes in the places intended for them.
• They put a special gasket on the previously installed studs and pipes big size, in configuration it looks like a truncated pyramid.
• Put the toilet bowl on the studs, securely connecting it to the nozzles.
• Install plastic inserts and rubber gaskets.
• Put on and tighten the fixing nuts.
• Cut off the protruding part of the rubber gasket.

After that, you can check the operation of the sewer by flushing water from the tank into the toilet bowl. To adjust the height of the toilet bowl above the floor, you can change the position of the retractable pins and studs designed to hang the bowl. In this case, they are usually guided by the growth of the visitor.

The universal height is considered to be a distance of 40 cm from the edge of the bowl to the floor level.

Mounting the flush button

It remains to install the flush button. It can be pneumatic or mechanical. This is not a difficult operation, since all connections are already provided on the installation and must already be routed to the appropriate hole on the wall.

To install a mechanical button, you will need to install special pins and then adjust their position. The pneumatic model only needs to be attached to the tedious tubes on the installation, and it will be ready to go.

Installing a hanging toilet with installation: do-it-yourself step-by-step installation (video)

Features of the toilet device with installation. Recommendations for the correct installation of a wall-hung toilet. Step-by-step instruction. Photo and video.

Installation of the toilet installation allows you to hide from visual view the piping unit, consisting of a drain tank, supply pipes and a sewer outlet. In addition to the aesthetic component, this approach greatly simplifies cleaning and frees up additional space in the bathroom.

Varieties

Modern installation of a toilet installation involves the use of one of two installation schemes. Each of the options has a personal set of positive characteristics. When choosing, it is necessary to focus on the material of the walls and the direction of the load on the structure.

block diagram

This way of installation of a wall-hung toilet bowl differs in convenience and simplicity.

To apply this inexpensive scheme, certain conditions are needed:

• For fixing the structure, only the main wall is suitable. It is pre-equipped with a mounting niche for the tank and other fittings. You can also use an additional partition made of brick, drywall or other materials. Decorative works carried out after the installation of the system.
• As fasteners, it is allowed to use only strong anchors that take on the entire operating load.

The strengths of the do-it-yourself block installation of a toilet bowl installation are its low cost and the possibility of using it in combination with hanging and stationary floor-type toilet bowls.

Framework scheme

The framework method of how to install a toilet installation is more difficult to implement. On the other hand, it is the only option for fastening to thin hollow partitions or plasterboard walls. The frame is very durable. The place of installation of the structure is the surface of the floor or foundation.

There are several options for mounting a wall hung toilet:

• On special fasteners to four points on the wall.
• Two points on the wall, two on the floor.
• On stable floor paws.

The main force is assumed by the lower part of the base. Strong point frame-type installations are the ability to adjust the racks. They are positioned at any level convenient for operation. fasteners of this type very convenient in cases where the room has custom shape or original design. With the help of the frame, it becomes possible to place the toilet in the corner area of ​​​​the bathroom, which saves usable space.

As for the dimensions, for block systems they are always fixed: width - 50 cm, depth - 10-15 cm, and height - up to 100 cm. Frame structures have a width of 50-60 cm, a depth of 15-30 cm, a height of 80- 140 cm (such a large span is provided by the adjustment of the racks). If the toilet is located in a wooden house or a non-permanent building, it is better to give preference to low structures with a large width. Thus, it is possible to reduce the load on walls and partitions. The plumbing unit gets the possibility of long-term operation without the threat of collapse.

Strengths and weaknesses of the solution

Like any other technology, installing a wall-hung toilet with an installation has a set of advantages and disadvantages.

Among strengths design features the following:

• A great way to mask from visual inspection of the nodes and parts included in the toilet piping. This also applies to inlet and outlet pipes.
• Free space is freed up. This is very valuable for such a small room as a bathroom. This is due to the huge demand for the installation of a toilet installation in small bathrooms or if there is a non-standard layout there.
• Excellent soundproof parameters. Allows you to get rid of the noise familiar to everyone when draining and filling the tank.
• The room becomes more hygienic. It is easier to clean, especially in the "dead" zone under the toilet and around it.
• Good and comfortable fit. After installing a plumbing fixture, you do not need to worry about its reliability. In addition, the placement height can be changed, depending on the anthropometric data of family members.

The disadvantages of installing an installation for a toilet, as a rule, include the high cost of the installation structure, the specifics of the installation and the need for mandatory removal of the outer decorative finishes during the repair or replacement of individual elements. However, the advantages of the installation far outweigh its disadvantages, which explains the widespread popularity of such modules.

Equipment

Before you properly install the installation for the toilet, check the complete set of the structure.

It includes the following nodes:

1. steel frame. It is the basis of the device, so it is made durable and reliable.
2. Retractable brackets. They make it possible to set the toilet at the desired height, placing it on the floor surface or on a special podium.
3. flush button. Main element the entire system, which looks like a plastic panel. Along with its main purpose, the button performs the function of an inspection hatch. Single devices only flush water. Double keys are equipped with the ability to control the water pressure. As a result, it is spent more economically. Innovative developments include other additional functions in the control panel. This can be a dual flush mode (economical and ordinary), or a stop flush (the ability to block the flowing water).

Nearby famous companies production of more modern non-contact control modules has been started. They work thanks to sensitive infrared sensors tuned to movement or obstacles. This makes it possible to transfer the operation of the system to a fully automated mode.

Leading installation manufacturers usually give a 10-year warranty. This applies not only to the unit itself, but also to all the parts included in the package. This refers to oil seals, seals, connecting pipes and a tank. Branded service centers are able to provide spare parts even for those of their models that are already out of production.

The advantage of large brands is that they have widespread networks service centers with qualified personnel. The specialists working there can always give advice on how to install a wall-mounted toilet bowl with an installation.

Necessary tools for installation

To solve the problem of how to properly install the installation, you will need a certain set of tools and devices. It is better to mount block or frame modules before finishing in the bathroom. The procedure itself, how to make the installation, is not complicated. Its implementation does not require deep knowledge or extensive experience. plumbing work. The product comes with a fairly detailed and understandable instruction and a CD with a video tutorial. In the course of installation, do-it-yourself toilet installations do not use specific equipment or expensive tools.

As a rule, all the necessary devices for this are in the house of a self-respecting man:

• Pencil, construction tape measure, ruler, level.
• Hammer drill or impact drill with a set of drill bits for concrete of different diameters.
• Screwdriver, hammer, glue, sealant, FUMka.
• Open end wrenches in several sizes.

This simple set of tools and fixtures will allow you to easily implement the installation installation yourself.

Where to place

In preparation for installing a toilet with a do-it-yourself installation, you need to decide on its location. Inside small shared bathrooms, this can be a corner of the room. In any case, the toilet should not block the passage. According to experts, it is most convenient to mount a new system in the area where the old toilet. As a rule, there are already outlets for sewer and water pipes, which significantly speeds up the installation procedures.

Markup rules

To mark up, you will need a simple pencil or marker, a tape measure and a level. When performing measurements, they are repelled from the dimensions of the installation module. A properly designed toilet installation scheme greatly facilitates subsequent installation work.

Marking order:

1. Find the central axis of the structure and transfer it to the wall with a ruler and a pencil.
2. Determine the dimensions of the gap between the edge of the installation and the wall. Permissible values ​​- not less than 13.5 mm.
3. Mark on the wall the location of the drain tank and the fixing points on the floor and walls. This is where the fasteners of the structure will be placed.

If everything is done correctly, it will be very easy to assemble the installation, as required by the instructions. Ready module will not clutter up the space, and create obstacles to movement inside the bathroom.

Block system installation

For the installation of a block-type installation, only capital, bearing wall. You can start working after choosing right place and carrying out marking procedures.

Description of how to put the installation of the toilet:

1. Determine the overall height of the module. As a rule, they are aligned with the specifics of the installation design. Most often, this parameter does not exceed 100 cm.
2. Mark places for dowels that act as fixtures for equipment. In this case, it is necessary to ensure that the holes are located at the same distance from the central axis. To make holes, a hammer drill or impact drill is useful. The immersion of the dowels is carried out with a hammer or manually.
3. Equip the installed dowels with anchors. This makes it possible to fix the main fragments of the module. Screws and nuts are used as fasteners. Alignment of the frame vertically and horizontally is carried out using height adjusters, clamps and plugs.
4. Bring the drain tank to the frame and fasten it to special connectors (they are included in the device kit). When fixing on bolts, they carefully monitor the observance of the distance between the frame and the wall. The permissible value is no more than 21 cm. In case of non-compliance with this requirement, problems arise with fixing the toilet bowl through a decoratively designed wall. The bolts in this case are too short.
5. Connect the module to pipelines. The water pipe is connected to the tank, and the sewer pipe is connected to the installation. To do this, you need plastic clamps. To achieve complete tightness of the butt sections, silicone sealant is additionally applied to them.
6. Screw the pins into the pre-drilled holes. Couplings are put on the studs and the nozzles are adjusted to size. Sufficient cushioning is provided by silicone or rubber pads.
7. Install toilet bowl. Attaching the wall-hung toilet to the installation provides good tightness for all docking points.
8. The last step in the procedure, how the toilet is attached to the installation, is to attach drain hose. Clamps are usually used to fix it.

When all installation work is left behind, it is necessary to check the operation of the plumbing unit and proceed to the finishing of the false wall. It will cover all the unsightly nodes of the structure.

Floor installation

Installation of the installation under the toilet, located on the floor surface, can be done with your own hands. It won't take a lot of time and effort. And implementation is within the power of a person without special knowledge in the field of plumbing. Using the finished design, you can mask all communication elements. The area of ​​​​the room receives additional space, which makes it more attractive, neat and modern.

How to install the installation for the toilet on the floor:

1. To fix the position of the knee, reliable metal fasteners are used. To process the release of a plumbing fixture, a technical ointment is used. Only after that the toilet is allowed to be moved to the future installation site. The marking of the drilling points through the niches in the heel of the device is carried out with a pencil or marker.
2. The toilet bowl is removed, which allows you to set the mounting brackets. The markup serves as a guide. After that, the plumbing module is installed back in such a way that the drain pipe falls into the fan pipe.
3. The installation of the drain tank is carried out according to the instructions from the manufacturer. To connect the installation to the sewer, as required by the rules, a connecting cuff is used. It fixes the place where the toilet is released. The bolts must be tightly screwed, and decorative overlays- are dressed.
4. To bring out the drain panel, a technical hole is made in the partition. The assembled system is tested for tightness. All detected leaks are eliminated.

After a successful check, you can proceed to the rigid fixation of the toilet heel and installation of a decorative partition over the installation.

How to assemble a frame structure

Before you properly install a wall-hung toilet through a frame installation, you need to decide on its location. Next, the required marking is applied to the selected area. The advantage of mounting frames is that they are able to securely fix plumbing fixtures to both solid and hollow foundations. This list also includes the popular drywall partitions and light walls. Thanks to the frame kit, the toilet can be placed in the corner and under the window.

How to make an installation in the toilet based on the frame:

1. Mark the area where the frame and fasteners will be located. Most often, this scheme for installing an installation under the toilet implies the presence of two floor and two wall fixation points. Alignment of the structure in space is carried out by means of a level and a plumb line.
2. In places of marks, drilling is carried out with a puncher or an electric drill. The diameter of the drills is selected depending on the cross section of the dowels. To increase the reliability of fastening the frame, in addition to dowels, it is recommended to use anchor bolts.
3. Examine the drain tank for the location of the outlets. Most often they are located on the bottom or side surface of the case. This moment affects how to connect the installation to the water supply. The most convenient to apply plastic pipes. With regard to flexible hoses, due to their limited service life, their use is not recommended. When the time comes for replacement, you have to spend a lot of time and effort to dismantle the exterior finish.
4. Using a pipe or corrugation, the module is switched with a sewerage system. The bowl at this stage is connected temporarily until the appropriate tests are carried out. The drain panel should operate as smoothly as possible.
5. If the design testing was successful, you can proceed to the final fixation of the position of the bowl and finishing designs. It is important to prevent the ingress sewer outlet and niches under the construction debris button. It is covered with a special overlay.

Having made the installation for the toilet, as required by the instructions, they proceed to the construction of the external false panel. It is placed around the perimeter of the entire complex, using for this metallic profile. These strips are convenient for the subsequent fastening of any sheathing (fibreboard or gypsum boards).

How to check the health of the system

Upon completion of the installation procedures and connection of the installation nodes, the unit is checked for its operability. First of all, you need to completely unscrew the water supply tap and see how the tank will be filled. If no failures are observed during the operation of the system, and there are no leaks in the connecting sections, you can proceed to the finishing design.

If even the slightest trace of moisture is found at the pipe joints, every effort must be made to achieve complete tightness. If communications in this state are closed with a wall, this can lead to serious problems, up to flooding of neighbors from below. Most often, problems of this type are eliminated by additional compression of the couplings or linings. For fidelity, silicone sealant is introduced into the thread.

During the installation of a wall-mounted toilet for installation, as a rule, the following defects are encountered:

• Leakage of water from the tank. The reason is usually the misalignment of the gaskets during the docking of individual modules. To eliminate the malfunction, turn off the water supply, remove the connecting screws and inspect the gaskets for their correct location. Any inconsistencies found must be corrected. It is better to replace products that are too chewed up with new ones.
• Toilet bowl backlash. To eliminate this defect, it is necessary to check the rigidity of the plumbing fixture and the installation fasteners. Weak elements are carefully tightened: this will make it possible to clearly fix the position of the toilet bowl in space. It is important not to overdo it, so as not to break the thread on plastic fittings and connectors. The same applies to metal screws, with excessive tightening of which ceramics can simply crack.
• Stagnant water in the bowl. This indicates an error in the positioning of the drain pipe. To fix the problem, a complete dismantling of the plumbing fixture is carried out. Only in this way can you get free access to the drain pipe: it is placed exactly at 45 degrees to the floor surface. After that, the toilet bowl is returned to its place.
• Damp stains in close proximity to the toilet. In most cases, the reason lies in the insufficient tightness of the corrugated pipe. To eliminate leakage, an additional layer of sealant is applied over the butt section. After the solution has dried, you can assemble the structure.

All of the listed faults are simple, and can be eliminated by the owners of the dwelling. In cases where they cannot or do not want to do this, there is always the opportunity to seek help from a professional plumber. The specialist will do everything quickly and reliably.

Before carrying out installation work yourself, it is recommended to study the following instructions for installing a toilet installation, drawn up on the basis of many years of experience:

• The installation scheme for the toilet should contain an inspection hatch under the drain panel. This will make it much easier scheduled maintenance tank and carrying out repairs. The masked hole provides quick access to the inside of the structure.
• When choosing a decorative wall covering the installation system from prying eyes, it is recommended to choose structures no thicker than 70 mm.
• The use of innovative flush buttons has not only an aesthetic but also an economic effect. It has been calculated that toilets equipped in this way reduced the level of water consumption for flushing by an order of magnitude. As a result, this affects utility bills.
• It is most convenient to install a drain control button in the central area of ​​\u200b\u200bthe tile or on the seam between two tiles.
• Optimal Height the location of the toilet bowl above the floor level is 40-45 cm. This will make it possible to protect yourself from stagnation of water inside the bowl and provide the desired drain angle along the sewer outlet.
• The standard distance between fixing holes depends on the type of construction. For compact models, the fastening pitch is recommended within 18 cm. For overall toilet bowls, the distance can be increased to 23 cm.

Before starting work, be sure to study the instructions for installing the installation for the toilet. The fact is that the installation of individual models may contain specific nuances.

Installation a simple toilet is not something complicated. But if the toilet is mounted, then the bathroom must be equipped with an additional link- installation. In this article, you will learn howdo-it-yourself toilet installation, as well as its connection to the sewer system.

While different brands of toilets may differ primarily in their bowl shape or surface, installation could be the cause of many toilet problems in the next 20 years. Indeed, after all, the tank, frame and other elements will be hidden, which will make access to them difficult.

The modern plumbing market can offer installations of two types.

Important! If the bathroom is located in the center of the living space, away from the main walls, then only a frame installation can be installed in it.

With regards to manufacturers, Vega, Grohe and Geberit are considered the most reliable today. But here it all depends mainly on personal wishes. It is important that the model belongs famous brand that has already proven itself. The installation costs will be more expensive, but in terms of operation it will quickly pay for itself.

What will be required in the work

To install the installation, you need to acquire the following tools:

Choosing the right tools is already half the battle.

Installation should begin with the selection of a suitable location. If the layout is standard, then the best place is a niche with risers in it. The niche itself will have to be redone somewhat, “pushing apart” the risers on the sides.

Important! Metal risers should definitely be replaced with plastic ones.

Wall hung toilet with block design

Step one. It all starts with markup. If we are talking about a small apartment, then the toilet is installed in accordance with the axis of the room, since the area here is insignificant. If the apartment is large enough, then the toilet is tied to the axis of the drain. This axis must be drawn with a marker.

Step two. The next step is to measure the height. It almost always depends on design features frames. Points for installing dowels are marked.

Important! Dimensions for this need to be taken only from the instructions attached to the product, because different manufacturers they are different.

It is also important to follow correct distance dowels from the installation center. For example, if its width is 60 cm, then 30 cm recede from the axis on both sides. Holes are made with a perforator, dowels are hammered into them.

Step three. The drain tank is screwed, the drain hole is twisted (both procedures are described in more detail in the instructions). The presence of all necessary gaskets is checked, after which the tank is connected to the water supply.

Step four. The pins that come with the plumbing are screwed into the pre-drilled holes. The distance that they protrude out depends solely on the size of the toilet. It is characteristic that the pins will be open until the installation is completed - only then the bowl is installed.

The last step is to fix the drain hose with clamps (if provided by the design).

Step one. First, the frame is assembled, after which a drain tank is attached to it. The position of the frame is adjusted by means of screws and brackets located on top. Frames are always sold separately - they are universal, so they are suitable for any toilet bowl.

At the end of the assembly, a structure with a height of 1.3-1.4 m comes out, while the width depends on the specific model. The maximum load that such frames can withstand reaches 450-490 kg.

Step two. When installing a drain tank, you must adhere to the following rules:

• the drain button should be a meter from the floor;
• toilet bowl - about 40-45 cm;
• sewer outlet - 22-25 cm;
• the distance between the fasteners must be equal to the distance between the lugs of the toilet bowl.

Usually the frame is attached in four places. There is a small gap between it and the surface - at least 2 cm.

Step three. The assembled installation is installed, moreover, clearly horizontally. To do this, the slope of the wall is checked with a plumb line and, if such is found, a horizontal line is drawn at the point of contact between the plumb line and the floor. Then, from the line at a distance necessary for the installation of the installation, a second one is drawn.

The frame is applied to the wall, fastener points are marked. Holes are being made. The frame is screwed to the floor, its height is adjusted by screws, and its horizontal position is adjusted by the building level.

Step four. A water pipe is connected to the drain tank. This can be done from the side or from above, but in almost all modern models, the connection point can be changed.

Important! It is undesirable to use a flexible hose when connecting a drain tank, because it will last much less than the toilet itself, and it will be quite difficult to replace it under a false wall if necessary.

Therefore, plastic pipes are used for connection. The tank itself is insulated with a material that prevents moisture condensation. Everything that is required for installation is included in the kit, except that the panel with a drain button must be purchased separately.

Step five. The toilet outlet is connected to the riser. It is often impossible to insert the outlet directly, so corrugation is used. After that, all connections are checked for tightness.

Step six. Before assembling a drywall box, do the following:

• close all openings with plugs so that debris does not enter them;
• screw the screws into the frame to fix the toilet bowl.

All technological holes are cut out in drywall, after which it is fixed on the frame with self-tapping screws. Drywall is tiled.

Step seven. The installation of the toilet bowl can be started no earlier than 10 days after laying the tiles. The outlet is fitted to the sewer hole, and the place where the tiles come into contact with the toilet is covered with silicone sealant. The toilet is placed on the shifts, the nuts are tightened.

After that, it is advisable to perform a test drain of water in order to check the tightness.

Step one. With the help of metal fasteners, the position of the knee is fixed. The outlet of the toilet bowl is processed with technical ointment, after which the device is placed at the installation site. Its outline is outlined with a marker, all mounting holes are indicated. Then the toilet is removed, and according to the markup, the mounting brackets that come with the kit are installed. The toilet is put back, the outlet is pressed into the fan pipe.

Step two. The drain tank is installed according to the instructions. A connecting cuff is fixed at the outlet of the toilet bowl, the bolts are tightened, and their caps are closed with special caps.

Step three. The drain button is led into the technological hole made.

Step four. The finished structure is checked for tightness.

Video - Installation for the Geberit DuoFresh toilet bowl - installation

1. If the floor toilet is flowing, then the tightness of the joints treated with sealant is checked. Corrugated connections are re-processed.
2. To simplify future repairs, a technological hole must be provided under the drain button.
3. The instability of the toilet bowl can be corrected by tightening the bolts. This must be done carefully so as not to strip the thread.
4. The drain button must be placed between the tiles.
5. The cause of the leakage of the drain tank, most likely, is the incorrect installation of the sealing gasket. To replace it, water is shut off and all fasteners are unscrewed. Gaskets get better, everything twists back.
6. The drain must be at an angle of 45ᵒС, otherwise the water will stagnate in the toilet.
7. When buying an installation, it is better to give preference to a model equipped with a water saving system. Often, such a system provides for the presence of two drain buttons - for complete or partial draining.

Video - Installation and installation of a wall-hung toilet bowl on a GEBERIT installation

Conclusion

Here, in fact, are all the nuances of installation. The main thing is to fulfill all the requirements, and at the end of each stage, check the tightness of the connections. All detected defects should be immediately eliminated, since it will be difficult to do this later, when the structure is hidden by drywall.

Video - Installation of the GROH installation

Floor-mounted toilets have been out of competition for a long time, but things are changing. Owners modern apartments more and more people are opting for hanging models. Pleasure is not cheap, but this is practically the only drawback of such a solution. But among the advantages of its design great design and serviceability.

It is important that the installation of the wall hung toilet is carried out in accordance with all the rules. We will tell you how and in what sequence the work is done, what devices will be required to fix the bowl. Based on our recommendations, you can do everything yourself or control the actions of plumbers.

House master can easily cope with the installation of a wall model, if you understand the distinctive features of its design.

The visible element of such a plumbing fixture is the toilet bowl itself. Its installation on the wall is carried out in two ways: using the installation and on a concrete base. In our article, we will consider both options.

A wall-hung toilet model is more expensive than a conventional one. floor version, but you can reduce costs if you do the installation of the product yourself

Strong and weak sides hanging types of plumbing are listed, which describes in detail the varieties and design specificity, guidelines for choosing the best model for you are given.

The design of a wall-mounted plumbing device can be conditionally divided into three main elements, which will be discussed further.

Reliable steel frame (module)

The frame is the main element of the entire structure, which is attached to the floor and to the wall of the bathroom. It is the frame that supports the drain tank and bowl. The quality of the subsequent operation of the product depends on its reliability. After the toilet is put into operation, the design will have to have a sufficient margin of safety to withstand the weight of an adult.

To secure the frame, you must have a solid foundation. Plasterboard walls cannot be considered as such. The frame is equipped with a mechanism that allows you to vary the installation height of the toilet bowl in the range of 40-43 cm. To securely fasten the bowl, manufacturers recommend using strong pins made of steel.

In this photo, all three elements of the toilet bowl are clearly visible: a light blue frame, a gray-blue plastic tank with a flush button and a white bowl

The best models of support frames for suspended plumbing are listed, which we recommend that you familiarize yourself with.

Concealed cistern

The hidden fastening of this element, according to adherents of the wall model, is considered one of the advantages of the design. The material for its manufacture is a very durable plastic. To prevent condensation from accumulating on the surface, the plastic is treated with styrene.

The tank has a flat shape, characterized by a technological cutout on one side. This cutout is necessary for the device of the drain key. This hole has another purpose: it allows you to remove the fittings of the drain tank when performing repair work.

Another feature of the suspended cisterns is economical system drain, which can be equipped with such a model. Depending on the need, the drain dose can be 3 or 6 liters.

The bowl is a visible structural element

The bowl is chosen, as a rule, based on the personal preferences of users. It is in plain sight and must comply general interior premises. In addition, it must be easy to use.

It is the toilet bowl, as a visible structural element, that should organically fit into the interior of the room: it can even have a square shape.

Most buyers prefer an oval-shaped product. Although on sale there are round, rectangular and even square models.

Fasteners are part of the selected model and are part of its configuration. Additionally, you do not need to purchase fasteners for a wall-mounted toilet bowl. In addition, among the mounted models there are electronically controlled and numerous hygienic functions.

Intelligent types of sanitary ware with retractable nozzles for washing and drying, deodorizing and other actions need to be connected to the power supply. Their installation is complicated by connecting the power line and setting up the system:

Image gallery

These long steel studs, which go through the holes in the frame and are attached to the wall, are necessary in order to securely hold the toilet bowl.

Connecting the necessary communications

First of all, we connect the sewer. For this connection, a black tap is used, which, as a rule, is included in the installation package. At one end, this outlet is fitted to the sewer pipe, and its other end is attached to the frame with special clips.

The water pipes must be located to the right or left of the module. The pipe should be attached to the structure using the threaded connection already existing in it. To connect the water supply, it is better to use copper or polypropylene pipes, and make the connection detachable.

Cold water can also be brought to the tank using flexible hoses. Such hoses are more profitable in terms of price, but their fragility should be taken into account. And when replacing failed hoses, you will have to carry out expensive repairs, so the option with pipes is still preferable.

Do not forget to check how securely the drain container is connected to the plumbing system. For this purpose, open the water supply tap. It is located inside the drain tank. After filling the container, all possible leaks are eliminated. This can be done without draining the water.

If, in the process of checking the correct connection of the toilet to the sewer or water supply, leaks are detected, they should be carefully eliminated

The sewer connection should also be checked. For this, a toilet bowl is put on the studs and a test drain is performed without final fixing of the structure. After that, the bowl is again removed and all identified leaks, if any, are eliminated.

Finishing work

At the next stage, you have to sew up a niche with a moisture-resistant drywall sheet, and then complete the finishing work. Please note that we need moisture-resistant drywall, because the usual one will quickly deteriorate under the influence of condensate.

To perform finishing work when installing a wall-mounted toilet bowl with installation, it is moisture-resistant drywall that is used, which can be in rooms with high humidity without compromising its quality.

For cutting drywall, you need to use a template that should be included in the installation package. It will allow you to correctly cut all the necessary mounting holes without damaging the material.

After installing a moisture-resistant sheet, a finishing material can be fixed on its surface. Most often, ceramic tiles are used to finish the bathroom.

Final installation steps

The installation of the visible part of the wall-mounted toilet can only be started after the tile adhesive has dried thoroughly.

The procedure for installing the toilet bowl:

• the outlet of the drain tank should protrude 50 mm beyond the wall surface: it must be adjusted to this size;
• they do the same with the pipe that leads to the sewer drain;
• both nozzles are installed on those intended for their place;
• on the studs that were fixed in advance, as well as on the branch pipes, they put on a large gasket, similar in shape to a truncated pyramid;
• the bowl is put on studs and branch pipes are attached to it;
• put in place rubber gaskets and plastic inserts;
• put on and tighten the fastener nuts;
• the protruding parts of the rubber gasket are carefully cut off.

Now you can drain the water from the tank, thereby checking the operation of the sewer drain. The height of the wall-hung toilet bowl in relation to the floor can be adjusted by changing the position of the studs and retractable pins that are used to secure this element. It should correspond to the height of the visitors to the toilet.

The installation height of the bowl can be adjusted in the range of 40-43 cm, but the standard distance is 40 cm from the floor surface

The standard height is 40 cm, measured from the floor surface to the top edge of the bowl.

Mounting plate

The installation process is completed by installing the drain key. It is included in the basic package and can be mechanical or pneumatic. Usually this procedure does not cause any problems, since all the connections provided must already be brought to the surface of the wall.

Special pins are provided for the mechanical key, and tubes for the pneumatic key. It remains only to install this element in the place intended for it and adjust its position. Everything: the toilet can be operated.

Suspended model on a concrete base

The steel frame is expensive. In principle, you can do without it by building a concrete pedestal with your own hands, which will serve as a reliable basis for a wall-mounted toilet bowl. This option is considered the most economical.

The composition of the model scheme on a concrete base includes: 1 - two rods for fixing the toilet bowl, mounted in the wall; 2 - concrete base; 3 - pipe for draining into the sewer

With this installation method, the drain tank can either be built into the wall, while bringing the drain key out, or placed above the bowl of the plumbing fixture.

Preparation procedure for installation

Consider the option that is considered the least expensive. Prepare everything you need for work:

• concrete M200 - about 40 liters;
• boards for the manufacture of formwork;
• threaded rods (length 50-80 cm, thickness 2 cm) - 2 pieces;
• washers, nuts, wood screws;
• plastic pipe (diameter 11 cm, length 8 cm);
• drain sleeve;
• Styrofoam;
• silicone sealant.

I think it is worth repeating that the wall with which we have to work must be capital.

Step by step installation process

We fix the rods in the main wall, on the outlets of which the toilet bowl will then be mounted. Recall that we should get a stable and reliable design that can withstand a weight of 400 kg.

The next step is the installation of the drain coupling. At this stage, it is necessary to determine the height of the toilet in order to cut the sleeve to the appropriate length.

Now we need to install the formwork. In order to mark the fastening points on the formwork, it is necessary to determine the distance between the holes intended for fasteners.

To calculate the length of the rods, you need to add up the thickness of the recess, which is approximately 15 cm, and the distance from the wall to the toilet bowl. To fix the rods in the wall, concrete glue is used - a chemical anchor.

This is how the structure ready for the concreting process looks like: the place where the drain will be brought to the toilet bowl is covered with foam

When the formwork is installed, and the installation of the pins is completed, you should install the bowl in the place intended for it. Make sure that the mounting holes match the outlets, and the outlet matches the drain of the coupling.

The next step is concreting. It must be done by installing the foam in the place where the drain hole will be. Remember that concrete will finally harden only after 28 days.

After that, you can remove the formwork and make sure that in front of us is a monolithic concrete block with pins coming out of it and an open fixed coupling. A toilet bowl is mounted to the front of the block, and a tank is placed on the base itself.

This is what the hanging toilet will look like after the bowl is installed, and its tank will be installed on a concrete base

The procedure for mounting the bowl to a concrete base is no different from installing a floor-standing toilet. It is necessary to install the bowl on the pins, tighten the nuts, connect and seal the drain. Lastly, a drain tank is placed on a concrete base.

As you can see, this method of installing a suspended model is much cheaper and easier than working with the installation. But, to be honest, the result is not much different from the floor toilet.

Conclusions and useful video on the topic

The information you just read will be perceived much better if you supplement it with a video next to it. We invite you to watch the installation with a wall-mounted toilet bowl with an installation filmed on video.

The range of plumbing fixtures is expanding: toilet bowls are being improved, updated, and become more and more attractive. But modern models, as a rule, are more expensive than traditional ones.

Tell us about how you installed a hanging toilet in your house / apartment. It is possible that you know the technological nuances that will be useful to site visitors. Please write comments, post photos, share your impressions and ask questions in the block below.