Exists interesting option Russian bath, who came up with a physicist Victor Maslov. We learn differences between such a bath, its advantages and disadvantages.

Let's talk about this option to create a bath complex as the Russian bath Maslov. We estimate what exactly the bathhouse is different, how can you create it on the plot with your own hands. Of course, do not forget to find out the advantages and possible shortcomings of the name Bani Maslov.

Russian bath Maslova

Traditionally, the baths are made to divide on national differences. Finnish sauna, Japanese Furako, turkish hamam... there are few nominal baths, they began to appear only lately, already in our century.

The special version of the Russian bath came up with a physicist Victor Maslov. He managed to connect Russian traditions of steam room with the latest scientific achievements and developments.

Russian Bath Maslova is, in fact, a fairly spacious cabin, which is equipped with special infrared heating elements, the system includes temperature and humidity sensors. The frame of the cockpit is created from stainless metal, then heat insulation and playproof materials.

From the inside the cabin is covered by two layers of moisture-resistant gypsum. It is to these panels that a heating cable is attached, already collected in the section. On top of a layer of grid made of galvanized steel, plaster and after finishing.

Other options are possible, the Maslov bath can be erected traditionally as a log house, but infrared heating elements - Mandatory detail.

What is the difference

As a result, it turns out a bath with the following distinguishing features:

• The steam room in the base of Maslov is immediately equipped with mixers and a drain path. That is, the steam room simultaneously becomes a washing, here you can conduct hygienic procedures. This approach allows you to save a lot of space, so the Maslov can be equipped with, in principle, even in the apartment;
• Interior decoration resembles not traditional steam room with wooden shelves, and hamam. Finishing - ceramic tile, mosaic, a natural stone, including marble, Jadeit, Basalt, Zlatit, Shungitis;
• Maslova's bath is equipped with an infrared steam-heat generator. It is closed from convection in the thermos-housing. It turns out a special thermos heater, allowing to add a pair if desired. And heated is placed on the zones of shelves - for legs, body and head;
• Ventilation in such a bath is always forced, "volley".

Modes

It is very easy to control the microclimate in the base of Maslov - there are sensors, and the panel with which you can select the desired mode. And there are quite a lot of modes:

Advantages of Bani Maslov

Pluses the baths of Maslov a lot:

• Quickly heats up, do not need firewood, simple control and big choice modes;
• Fire safety, because the stove is simply no, like wooden decoration;
• Easy to maintain cleanliness - in the steam room there is already a shower mixer, and wash the tile or stone simply;
• Overheated couples light, clean, comfortable;
• Places need a little compact option combining steam and washer;
• Banya Maslova gives the effect of recovery, soft IR radiation allows you to get rid of the cold, pain in the back, rejuvenates the skin.

Disadvantages of Bani Maslov

However, Maslova's bath is criticized. The connoisseurs noted that the IR radiation as a heating of a steam room is no longer a real Russian bath. Where is fragrant firewood, where is the process of extracts and control over the furnace?

In addition, equipment for heating Bani Maslov will cost more than the construction or purchase of a regular furnace. Yes, and to equip everything yourself, without having proper skills of working with the system of infrared radiation, difficult.

Experts believe that the baths of Maslov benefits are more. She got rid of the shortcomings of the dry sauna and wet hamam, taking the best from the traditional Russian bath. Is it so - see for yourself, having equipped such a bath at home. Published

If you have any questions on this topic, ask them to specialists and readers of our project.

Created by analogy of the vaulted Russian oven, Maslova's bath combined all the advantages traditional species Ban, but at the same time devoid of their minuses. Comfortable, multifunctional, providing unique therapeutic effectIt is considered the best invention in this area in the last hundred years. Designed and developed her design scientist-physicist Victor Maslov, aligning tradition with scientific achievements.

According to the appearance of Banya Maslova reminds Hammam, but in fact it has significant differences. In this bath, all surfaces are heated, including the ceiling, the temperature regime is set separately for each part of the room. Thanks to a special steam generator and thermal cables, steamed steaming is uniformly and quickly. Even with a low temperature (40-45 ° C), it is possible to completely warm and drive in just 20 minutes. At the same time breathes in the bath easily, the head does not hurt, there is no load on the heart. Banya Maslova fits all - from fans of hot Russian steam room to kids and pregnant women, people with weak health.

Another feature of the RBM is ventilation system. It has several modes of operation, and for each of them creates its microclimate. The air in the steam room is regularly updated, so even with long-term finding there is no sensation of gravity or discomfort, as it happens when visiting a regular bath. It is heated by the pair of only 1-1.5 hours, unlike the Turkish and Russian bath.

Comparison of electricity costs and a bath scheme

Benefits

Effect of recovery.Deep and uniform heating of the body, which is performed by IR radiation, soft and bioresonance, contributes to getting rid of many diseases, ranging from a banal cold and ending with chronic diseases of the musculoskeletal system. Regular visits to such a bath strengthens the weakened organism, contributes to the rejuvenation of the skin, increases the vitality of the tone.

Hygienicity.The inner lining of the bath consists entirely of ceramics, natural stone or glass mosaic, so cleaning can be cleaning with any disinfecting agents. This finish does not absorb moisture, does not change the color, it is not subjected to rotting, it is advantageous to differing from the tree, which is used in the traditional bath.

Fire safety. In the construction of the bath, exclusively non-aggravated materials are used, the heating panels are installed under the layer of facing, the temperature is strictly monitored using sensors. Due to this, the need for fire extinguishing systems completely disappears.

Air purity.Regardless of the temperature and humidity regime, the air in the steam room remains always fresh and clean. Normal metal stove When heating the bath, the smallest rust particles, dust, as well as a certain amount carbon monoxide From the burning of oxygen. Created by the oil heat generator is deprived of such flaws and provides filling with steam light and pure superheated steam.

Ease of operation.Warming up the room is performed very quickly, and control is carried out using sensors. To warm up the bath, you need to turn on the touch panel and select the mode. If desired, the RBM is equipped remote control And connects to the tablet or to the phone.

The first thing amazing is the manageability of modes, as well as the remote control

Various temperature modes.

Using the control panel, one of the thermal modes presented is selected.

Switching modes easy to pick up optimum temperature For each family member, and kids including.

Wide installation options. In the RBM, the steam room is both was and washing, since it is equipped with a drain ladder and shower faucets. Such a layout significantly saves the place, and therefore it is possible to install a bath ordinary apartment, in the attic or in the basement of the private house, in the spa or fitness center.

For baths Maslov does not need a large room

Maslova's bath is a spacious cabin equipped with heating elements with temperature and humidity sensors. The frame of the cab is performed from stainless metal, which is closed with a layer of thermal insulation and a steamproof material. From the inside the bath is coated with two layers of plaster panels with increased resistance to moisture. The panels are fastened with a heat-resistant heating cable, assembled for convenience in the section, pave the wires and connect control sensors. From above, all this is trimmed by a galvanized steel grid, which is applied by a layer of heat-resistant plaster on cement based. After drying, the surface is treated with the waterproofing compositions of deep penetration.

The inner device of the cockpit includes one or two sun beds anatomical shape, a shower, a special temperature-thermos and a drainband. Additionally, ergonomic armchairs, an ice generator and a tidy bucket, legs for feet and massage shower can be installed. The surface of the regiments is divided into three parts - for the head, body and legs, and in each of them their sensors and heating elements.

Finish - predominantly natural materials: Talco chlorite, Shungit and marble, Jadeit and basalt, as well as ceramic tiles, glass mosaic.

Interior and procedures in the RBM

Adhesive mixtures with which fasten the facing must necessarily be resistant to moisture and high temperatures. Entrance door For the baths usually make from tempered glass with a toning coating, door box It can be both wooden and metallic. The battery control panel is taken out of its limits, in a separate utility roomAnd the screen for selecting modes is usually attached on the pre-banner wall.

Bani Interior (Pregnant

Lighting and ventilation

To illuminate the baths, halogen hermetic lamps are usually used for 12V, so that the light in the steam room was muffled and promoted relaxation, the lamps when mounting the ceiling are closed with special screens with small holes.

If the lighting is mounted on the walls, the lights are preyed under the light bulbs. Additionally, you can install devices for lighting effects or audio background. Pleasant light music and inadequate light helps the body to relax faster, to get rid of extraneous thoughts and negative emotions.

The ventilation system device provides several operating modes when operating a bath:

• forced ventilation steam room when heated and massage;
• overlapping the exhaust hole in the process of the harvest;
• slip ventilation for airing room after bath procedures.

For air inflows in the pair do ventilation hole From the pre-banker or leave a wide slit at the bottom of the door.

At the same time, in the very pregnant, it must be equipped exhaust ventilation. Upon admission to the pre-banner, air passes through a special low-temperature heater made from ceramics. It provides a normal air exchange indoor without a decrease in temperature. The ventilation system is necessarily equipped with a throttle valve and condensate collection.

For heating cabin, infrared long-wave panels are used. Corpus has rectangular shape, from back side There is heat transfer insulation (predominantly foamphol). Working surface The panels are heated to 50-60 ° C, which corresponds to the layered temperature of a well-dried Russian oven.

The wavelength of these devices has the most favorable effect on the human body. Each panel is equipped with a multichannel thermostat with sensors that allow you to set the temperature with an accuracy of 1 degree. Each segment of the steam room has its own temperature range:

• sun beds, seats - from 41 to 43 ° C;
• the backrest of sun beds - from 43 to 46 ° C;
• floor walls up to mid-45-50 ° C;
• the upper part of the walls is from 55 to 60 ° C;
• sucks - from 60 to 70 ° C;
• ceiling - from 65 to 80 ° C;
• outdoor coating - from 35 to 40 ° C.

Technical conditions for mounting wiring in the RBM should be exactly the same as for standard Kitchen from electric stove. In the heating mode, the steamy power consumption is 3 kW for a single cabin and 10.5 kW for a 5 m2 cabin. About 300 watts are consumed in standby mode, during operation, steam consumption increases to 2 kW. Compared to the electric heater used in the steam room, infrared panels Much more economical.

It takes about 1.5 hours for heating the bath, and the heaters all this time work at full capacity. As soon as the temperature reaches the specified value, the consumption power is reduced. The thermostat supports the temperature automatically, and by setting the parameters, you can safely enjoy bath treatments. The control interface is very simple, the selection of modes is made by touching the finger on the display icons.

The popularity of RBM contributed to the creation and development of panels heated by water - Aquapaneurs of Maslov.

They have a rectangular shape filled with water through small hole At the bottom, conveniently attached to smooth surfaces. For the manufacture use Dural. Mount such panels easier than electric, they do not require additional waterproofing, Facing can be attached directly to duralum with heat-resistant glue.

Thanks to the creation of aqua, the ability to equip mobile baths On wheels, where heating the coolant provides a diesel furnace.

But for fixed conditions, mobile baths are an excellent solution - to collect RBM in an apartment or a private house will now not be difficult. When installing such panels on the ceiling and walls, a heat-resistant or bamboo can be used as a plating for the bath. At the same time, the floor and sun beds are still facing ceramics.

Construction of the Zhewner

Heat Generator - Photo

Kamenka used in the base of Maslov were designed specifically for such cabins. They got the name "Herogenerator", abbreviated - "LIGHT". It is a double metal container with Tanes and stones laid on top.

The gag does not heatese the room, because there is no need for this, but only produces steam. The inner tank is protected by a thick layer of insulation, so the outer walls are not heated above 65 ° C. The size of the heat generator and the power of the TEN is selected depending on the size of the RBM. You can put in one pair immediately two, tuned to different temperature modes. Then, at the request of soaring, they can receive steam, characterized by temperature and humidity.

To get a "light" pairs, that is, a very superheated, between the stones of the heatgenerator, the steel funnel is installed, where and poured water in small portions. Water falls on the bottom of the hot tank and begins to boil and evaporate, and steam, passing between metal elements and stones, heated to the desired temperature.

In the early models of steam generators together with the stones, plates from cast iron were used. They were installed close to thendam, in the hottest zone, increased the heat capacity of the device and extended the life of its operation.

2002 hot heat generator

And yet, the cast iron has one significant disadvantage - under the influence of steam it rusts, and carbon, which is released, is converted when oxidation turns into ditch gas. All this together with dust from the collapsing stones enters the air steam room. And although the amount of carbon monoxide, dust particles and rust is minimal, negative impact The body is still felt, especially with a regular visit to the bath. In the new modifications of cast iron steam generators replaced with steel stainless steel rods. The rods are located inside special pipes, also made of heat-resistant anti-corrosion steel. From above over the pipes, a steel sheet is mounted with low sidelights, on which stones are stacked. To produce overheated steam on one of the pipes inside the case, the heat dispenser is mounted - the stainless steel container of the cylindrical shape, equipped with a hydraulic and replaceable jet.

The hotkenerator is attached to one of the walls of the bath at an altitude of 1.5 m from the floor. In order for the steel housing of the gog, it is not highlighted against the background of the walls, it is lined with ceramic tiles to the interior.

Construction of the RBM do it yourself

To build a bath of Maslova is not easy at all, because for this it will be necessary for certain skills not only in construction, but also in working with electrical equipment. If you have such skills, and you burn this miracle bathroom at home, first will have to purchase ready-made factory panels for walls, floors and ceiling, as well as steam generator and other components.

Buy electrical equipment for the RBM follows only the company that owns the rights to its manufacture and installation. Only LLC Bani Maslov (www.bani-maslova.ru) has these rights. The company has all the necessary permits and patents for the production and sale of Ban Maslov, which guarantees the full safety of the instruments, their effectiveness and minimal energy consumption. In addition, all the baths ordered from this company are undergoing author's checks in the inventor - Viktor Valentinovich Maslov. Acquisition of equipment analogs from other manufacturers does not give such a guarantee and can lead to negative consequences, for example, overload of the power grid and fire.

RBM can be located separately from other buildings, and may be right in the house. The first option will be more expensive because the metal framework is required with qualitative insulation and waterproofing. Additionally, you will need to bring pipes for water supply and drain, pull the wiring. The second option is much more convenient and cheaper, because the bath is located indoors, where the wiring and sewage is already there.

Modular cabins with duralum aquapanels for individual assembly of the bath have sizes 2.2x2.2 m and 1.5x2 m, so much space does not occupy. Most often, home RBM is equipped with a bathroom or storage room. In addition to the cabin itself, small plot Square will be needed for the technical room where the automation will be located. If the ceilings height is large, you can make the technical zone right above the steam.

Prices for aquapanels

aquapanel

Step 1. Determine the most optimal option Placing the bath and make up the drawing. To the sizes of the cabin, it is necessary to add on each side at least 10 cm - on the heat and waterproofing of the room. For the pre-banner, there is enough space 1.7x1 m, for the technical room even less. Immediately consider where the shower with the mixer and drain gear will be located to minimize the costs of laying additional pipes. That is why the location of the cabin in the bathroom is considered the ideal option: Water supply and drain there, ventilation too, there is enough space. In the RBM, any hygienic and spa treatments can be performed, so it completely replaces the bathroom.

Another one an important element is sunbed. Depending on the modification of the bath, the cabin is equipped with one or two sun beds, which are metal carcass with a heated top shield. Optionally, you can lay out the basis of a bed of a hollow brick, so the design will receive additional strength and a more solid look after the cladding.

Mixers should be located on the side of the sun beds, and the heat generator between them, on the opposite door of the wall. If the sun bed is one, the hotkenerator is hanging on the opposite wall at an altitude of 1.5 m.

Step 2. According to the drawing, they are placed in the room of the exit of pipes, electrical cabinel and ventilation, drilled in the walls of the hole. For water supply, pipes ½ inches are used, for a drain diameter of 50 mm, so the holes must be appropriate.

Step 3. Place the location of the regiments and lay them out of the brick. The shape of the regiments is rectangular, dimensions - 2.3x0.8x0.7 m and 2.3x0.5x0.7 m. The masonry can be solid or in the form of a bench when lay out on the sides brick blocks and connect them with metal chapellers or corners. On top of the metal there is another row of bricks, and then the whole design is placed in cement mortar.

Step 4. Next, the room is required to completely inspire. Walls and ceiling are cabled with plates basalt insulation or other non-combustible material. From above, all this should be closed with foil, fasten the aluminum scotch on the seams. For heat insulation, foil plates are used, as it will also warm. When insulation, do not forget to make cutouts in thermal insulation under the holes for pipes, cable and ventkane.

Prices for basalt insulation

basalt insulation

Step 5. Unpack panels and install the cab in the manufacturer's instructions, which must be attached to the heating elements. You can pre-assemble the design in the spacious room, huddling the fasteners in order to more accurately understand its device. This will help avoid mistakes and save time. Cables and tubes are inserted into the technical room, insert ventilation box, Connect the drain gear to the sewer tube.

Step 6. Now you can start facing the surfaces with ceramic tiles. The glue is necessarily taken heat-resistant, because the tile will warm up to 50-60 degrees. When cladding, observe the uniformity of the seams, because in small premises Any defect will be very noticeable. Do not allow glue to the front part of the tile, and if it happened, you immediately wipe on a clean cloth.

Step 7. On the wall between the sunbeds at an altitude of 1.5 m from the floor, the heat generator is fastened on the brackets, which is also facing ceramics outside. After that, hang a door leaf from heat-resistant glass, in the pre-tribades set another ventilation box with a condensate trap and throttle.

Step 8. In the technical zone, the cable is connected to the automation to control the bath, remove it to the power supply shield. The control display is fixed on the Eye Preban Wall. Connect the electrical cabel should be strictly according to the schemes that are necessarily attached to the equipment. It is best if an experienced electrician will be engaged in this, because the slightest inaccuracy can bring the system or provoke a short circuit on the network.

Indications and Contraindications for RBM use

Maslova's bath is able to cure many diseases at a competent approach. Indications To use such a bath are:

• chronic heart disease;
• hypertension in the initial stage;
• bronchitis and pneumonia;
• epilepsy, various neurosis and depression;
• problems in the endocrine system;
• allergies of various species;
• ulcer stomach.

In addition, the regular visit to the RBM is recommended for children with weakened immunity and pregnant women. Bath procedures with uniform warming of the entire body help to get rid of toxicosis, hypocheses of the fetus, contribute to a decrease in blood loss during childbirth.

Of course, it takes to completely cure, the time and patience is required, in no case cannot be abused by the bath and be in it longer period. Special attention You need to give contraindications, otherwise, instead of recovery, you will get a completely reverse result.

Contraindications:

• all types of acute infectious diseases;
• sharp exacerbations of inflammatory processes;
• brain circulation problems;
• heart attack and the concomitant states;
• renal failure;
• hypertension of the third stage.

Proper use of the baths of Maslov will help restore the tone, gain energy and just enjoy life.

Video - Russian Bath Maslova

Let's talk about this option to create a bath complex as the Russian bath Maslov. We estimate what exactly the bathhouse is different, how can you create it on the plot with your own hands. Of course, do not forget to find out the advantages and possible shortcomings of the name Bani Maslov.

Traditionally, the baths are made to divide on national differences. Finnish sauna, Japanese Furako, Turkish Hamam ... There are few nominal baths, they began to appear only lately, already in our century. The special version of the Russian bath came up with a physicist Victor Maslov. He managed to connect Russian traditions of steam room with the latest scientific achievements and developments.

Russian Bath Maslova is, in fact, a fairly spacious cabin, which is equipped with special infrared heating elements, the system includes temperature and humidity sensors. The cab of the cabin is created from stainless metal, then heat insulation and countertile materials are followed. From the inside the cabin is covered by two layers of moisture-resistant gypsum. It is to these panels that a heating cable is attached, already collected in the section. On top of a layer of galvanized steel mesh, plaster and after finishing finish. Other options are possible, as a separate structure of the Maslov bath can be erected traditionally, like a log house, but infrared heating elements are a mandatory part.

As a result, it turns out a bath with the following distinguishing features:

• The steam room in the base of Maslov is immediately equipped with mixers and a drain path. That is, the steam room simultaneously becomes a washing, here you can conduct hygienic procedures. This approach allows you to save a lot of space, so the Maslov can be equipped with, in principle, even in the apartment;
• The interior decoration resembles not a traditional steam room with wooden shelves, and Hamam. Finishing - ceramic tile, mosaic, natural stone, including marble, Jadeitis, Basalt, Zlatit, Shungitis;
• Maslova's bath is equipped with an infrared steam-heat generator. It is closed from convection in the thermos-housing. It turns out a special thermos heater, allowing to add a pair if desired. And heated is placed on the zones of shelves - for legs, body and head;
• Ventilation in such a bath is always forced, "volley".

It is very easy to control the microclimate in the base of Maslov - there are sensors, and the panel with which you can select the desired mode. And there are quite a lot of modes:

Pluses the baths of Maslov a lot:

• Quickly heats up, do not need firewood, simple control and a large selection of modes;
• Fire safety, because the stove is simply no, like a wooden finish;
• Easy to maintain cleanliness - in the steam room there is already a shower mixer, and wash the tile or stone simply;
• Overheated couples light, clean, comfortable;
• Places need a little, compact option to combine steam and washer;
• Banya Maslova gives the effect of recovery, soft IR radiation allows you to get rid of the cold, pain in the back, rejuvenates the skin.

However, Maslova's bath is criticized. The connoisseurs noted that the IR radiation as a heating of a steam room is no longer a real Russian bath. Where is fragrant firewood, where is the process of extracts and control over the furnace? In addition, equipment for heating Bani Maslov will cost more than the construction or purchase of a regular furnace. Yes, and to equip everything yourself, without having proper skills of working with the system of infrared radiation, difficult.

Experts believe that the baths of Maslov benefits are more. She got rid of the shortcomings of the dry sauna and wet hamam, taking the best from the traditional Russian bath. Is it so - see for yourself, having equipped such a bath at home.

07.03.2016

Often the baths are known by the names of the districts, where they are located or the names of their founders. However, a person who did not happen in them, they say these names. This is all happening due to the fact that the baths usually own entrepreneurs who do not make sense and time to delve into all the nuances associated with vaporization, temperature modes and other subtleties. To figure out in detail in all the subtleties of the "Banner", you need to have knowledge in the field of medicine, physics, and architectures and other sciences. Business people usually not before this ...

The nominal baths appeared in the XXI century. These baths united the latest achievements in science and many years of experience All nations. In this case, the name reflects the heating methodology, positive impact on the human body, construction technology. This article will be told about many types of baths, about their influence on human health. Or rather about the Russian bath Maslov!

At first glance, we will like original interior: Comfortable sun bed, low air temperature (40-50 degrees), ceramic tile, which resembles a tree structure. Fresh and dry air. Rinsing process to produce, possibly without leaving the steam floor and ceramic walls Not afraid of dampness, and water quickly leaves. After warming up, you can proceed to procedures. The chapel spaced on the wall allows you to instantly understand the temperature. You always feel that you are in the Russian bath.

Due to abundant sweating, the skin is cleaned through the pores. Comething and toxins are out of the body. This reduces the load on the swords and kidneys. Due to the fact that the floor and walls with ceramic coating do not absorb moisture. So in the pair you can carry out any cleansing procedures. Therapeutic dirt is thoroughly cleaned by the skin, they return to her former youth. The most experienced visitors who have studied all the nuances of Bani Maslov receive the most pleasure from the time of spending bath procedures.

The history of the creation of baths of Maslov and its device

The founder is Victor Maslov. He combined wide scientific and engineering knowledge and love for an easy pair. At the moment various options Baths are manufactured in an industrial basis. The bath is heated using electrical panels, developed by Maslov itself. Such complexes passed large medical and technical checks. Patents and certificates were issued (even international level). The success of Maslov gained not only the territory of Russia, but also abroad.

For the concept of ideas and features of Bani Maslov, let's compare with it known Turkish, Finnish saunas, in which the wellness method of hyperthermia also applies.

As everyone knows, (hyperthermia) excessive overheating of the body - this is the use of the protective function of its body for the conclusions of the unnecessary products of life and to destroy pathogenic organisms. Several thousand years ago as not medical treatment And the maintenance of good health was used to increase the temperature. To combat many diseases, this method of treatment is used in medicine. Due to the increase in body temperature (more than 37 degrees) viruses and bacteria and many pathogenic microorganisms do not tolerate heat and die.

So, let's compare the Russian bathhouse of Maslov with the rest of the baths.

This room is a trimmed with a tree, in which there is an electric stone and wood-fired metal furnace. Difference it is dry and hot air. Its temperature from 80 to 120 degrees, with a humidity of 10-15%. Due to the low heat transfer and heat of dry air. The body of the devices tolerates the high temperature. The skin surface is cooled due to a stable sweat selection, which increases with an increase in temperature.

1. The need is in the structure of several rooms, with installation in each of them adjusting moisture and temperature.
2. Implementation of high complexity, it matches high financial costs.

Infrared cabins

This is one of the latest developments of foreign manufacturers. If you compare with the Finnish sauna, then instead of the Kamenka installed (IR) infrared heaters. The radiating surface temperature of heaters is more than 300 degrees. Body B. infrared cabin It warms almost, as well as in the Finnish sauna.

Disadvantages of infrared bath or just cab:

1. With prolonged irradiation, adverse effects on the skin has
2. In connection with high temperatures The probability of intoxication of the body is similar to both in the Finnish sauna
3. Uneven irradiation of a person's body from various sides.

Russian Bath Maslova (RBM)

This kind of bath includes the whole range of advantages over Turkish, Russian bath and Finnish sauna. All previously voiced flaws are removed.

The peculiarity of this bath is that the warm-up mode is "soft." With a temperature of from 30 to 60 degrees. Humidity from 10 to 100%. Lenhing and floor are facing granite, marble or ceramics. Bath warming is carried out at the expense of the developed electric heating panels. They are located under the cladding, and therefore provide complete shielding from the radiation of the current industrial frequency and electrical safety. Facing materials are durable, hygienic, as well as obtain the maximum intensity of heat transfer. The floor is selected by the temperature in the range of 25-35 degrees, Lena is 45-50, the walls are 40-60 degrees. Temperature adjustment for each surface is automatically supported. It should be noted that the most important element is uniform heating from any parties. Just uneven warming on various sections of our body will create the effect of "draft". This is one of positive moments in the bath. And the "soft" IR radiation is bioresonant. Which means a beneficial effect on the inner tissues of the body. Parry is equipped with a shower and heat generator. The floor is equipped with a lady of water.
The heat generator, in contrast to the rest of Turkish, Finnish pairs are equipped with heat accumulating stones closed from convective flows. And a special fractional composition of stones on the volume of the camera and the special temperature distribution of the heat generator allows, eliminating burnout organic compounds flavors, which are contained in "water for sacrifice". And the temperature of dry pair is obtained over 100 degrees.

The temperature of the steam and its quantity depends on the amount of "granted water to hot stones. Par S. aromatic oilsThis is very useful for inhalation and purification of breathing paths and lungs. Superheated dry steam with help will be, is a massage of the skin surface. It purifies from the burnt particles and reveals the pores.

The adoption of the RBM in every week is to increase immunity in the body to infectious diseases, safely affects the respiratory organs, blood circulation stabilizes, the metabolism is improved, blood pressure decreases. The rejuvenation of the body occurs in the eyes. Salt sediments seem to evaporate from the body, the flexibility of the joints and the spine improves, disappears such a disease as arthritis, the vascular system is trained, and cholesterol disappears. Diseases such as prostatitis, cholecystitis, chronic tonsillitis, hymoritis will never appear in your life. In the RBM bioresonance, heavicaturing, metabolic, anti-inflammatory action, stimulates our immune system. Within a few days after the adoption of the bath, an increase in the processes of oxidation of the skin of the skin, as well as the process of metabolism is intensified. One more out important advantages ICBM - constructive versatility. The ICBM is developed for watching villages, towns of builders, field camps and similar objects, where the access possibility is from 30 to 120 people per day, and electricity consumption on average from 40 kW / day. Developers managed to achieve the minimum low electricity consumption, the process of work of the RBM.

For example, the power of the wage will be 8 kW at an area of \u200b\u200b10 m 2, and at 1.5 m 2 ( standard size Sanitary technical cabin) - approximately about 3 kW. This is at least twice less power Normal electric furnace Kamenka overseas production for tender heating Steam with the same volume. Yes, and the cost of the product is noticeably lower than in Irish and Turkish baths, in connection with this, the Russian Bathhouse Maslov is more accessible to organizations and private consumers. The design of electrical panels is reliable from the point of view of electrical safety, as well as mechanical strength. So firms that establish such a bath give not a small warranty period.

So, having learned what Russian bath Maslov, determining her positive sides Against the background of the rest of the baths, we can draw the following conclusions:

1. Really build better good bath, in order to improve health, not the destruction of it. We have enough negative influences on the body with ambient. Foreign manufacturers have not fully managed to provide all factors for the protection of our body from visiting their baths.
2. Maslova's bath in many respects exceeds the other types. After all, with the normal use of such a bath, our health will only go to improve. And there is no doubt that we can get unnecessary incomprehensible diseases. Do not think about it. After all good health - This is the main success in life. And by this we will delight ourselves, our relatives, people close to us. As they say, if health is, it means everything else. So it is worth thinking about how to save our health, and in which bath we walk. The choice is behind you !!!

In modern society appear various designswho combine in themselves top Qualities From several types of baths with a classic Russian steam room.

One of those constructive decisionswhich is becoming increasingly popular, is the Russian bath Maslov (RBM).

Banname received his name in honor of the inventor and engineer - Maslova V.V.

We offer to watch a video where the inventor himself tells about his creation.

What is this bath and what she is so popular

Banya Maslova is a kind of hybrid between the Russian oven and the Finnish sauna, which combines a long and deep heating of a person with the possibility of steaming if there is both dry and wet air.

The popularity of Banya Maslova achieved thanks to a soft microclimate in a room, sufficiently low temperatures, allowing to take bath procedures to people with heart problems, hypertension, pregnant and lactating women - in general, to all those who visit the classic Russian bath and the sauna is contraindicated.

The idea of \u200b\u200bcreating such a bath came to the inventor when he tried to repair a Russian oven in his mother's house. Being inside the oven, the walls of which after the protopa were slightly heated, the owner began the strongest sweating.

And the thing is that in ancient times, the Russian people were treated, when after the protrusion of the hut and baking bread, the coal was stopped, the boards were harvested inside the oven, for which the patient was put.

Long-term foundation in the furnace at a temperature of 35-50 ° C, caused the strongest sweating, the bloodstream was intensified, and blood saturation with oxygen. As a rule, after a few procedures, even seriously sick people became "on their feet."

Construction of an innovative steam room

Unlike the classic Russian bath, in the design of which was used exclusively a tree and a stone stove. Russian Pair Viktor Maslova is a small room, all the surfaces of which are separated exclusively to ceramic tiles.

Under the surface of ceramics there are electrical tagnes that heat them up to the necessary and comfortable temperature.

Electric heaters are built into the surface of the walls, ceiling and floor. Even lying in such a heated bath.

Moreover, the ceiling, in the design of such a steam room, heats up the most, similarly to the inner surfaces of the Russian oven, where the dome is the hottest.

As a result, getting into such a room, heat is radiated from everywhere, which makes it possible to slowly warm up, even at 30-50 °. But that's not all that is wonderful design of the bath Maslov.

In its invention, a steam generator is provided, as it calls it itself - the heat generator. It is a small electric stove, which is set to a height of about one and a half meters to save space.

The steam generator is quite low and does not serve to heat the air indoor. Tanes heat the stones exclusively to create a couple that may be needed after slow warm-up in order to bathe with a broom.

Innovation is not only in this. A shower is arranged near the sun bed, thanks to which you can cool even in the process of sprinkling. And it is liked to many visitors when you watered right on the warm sun bed. Water, while not going on the floor, and goes through the waterborg. In general, heat, light, you can not strain the body for several hours.

Thanks to the integrated temperature sensors, and the steam generator, almost any microclimate from dry hot air can be installed in the Masl Ban, from dry hot air to wet, moderately heated.

Features of using bath Maslov

In addition to attractive temperature mode, independent control of air humidity, and shower in the steam room, for conducting contrast procedures, Banya Maslova has a few more advantages.

One of the most impressive features is the rapid warming of the bath, with minimal energy consumption.

For example, for preparing a small paired dimensions of 1.5 to 2 m, no more than an hour will be required, spent about 3 kW of electricity.

Since infrared panels, mounted under the bathing of the bath ceramic tiles, thermal radiation is as similar to the heat being emitted by the Russian oven.

Modern bath V.Maslova is equipped with the latest technology: spinat for draining water mounted in the floor, forced ventilationBut the inclusion of it and the setting of temperature indicators can be controlled remotely, thanks to the smartphone.

The design of the heating panels, electric helicopters, tested and patented. Wishing all components are supplied in the finished form. But, on the expanses of our Motherland exists a large number of People who would like to build their own analogue of Bani Maslov in their own home.

How to make a pair do it yourself

Before building a bath of Maslov with his own hands, it should be clearly understood that original product You can get using exclusively component parts that are manufactured in accordance with the license for the right of manufacture.

The construction of Bani Maslova is a complex process that requires certain knowledge and experience. If you are not sure about your abilities, please contact professionals.

In order to make such a pair you will need:

• Frame frame, made of corrosion-resistant steel, covered on two sides with wall plaster panels.
• On the inner layer of plastering plaster, fasten the heating elements as a cable with temperature sensors.
• After that, the resulting design should be attached. To do this, pull over the entire inner surface of the frame plaster grid From corrosion-resistant metal and apply a layer of heat-resistant solution.
• After drying this layer, make facing internal surfaces Steam natural stone.
• Next, it is necessary to make a sun bed, which integrate the heating elements, divided into three different zones and temperature sensors to each of them.
  After that, to separate the sun beds in the same way as the surface of the frame.

In order for the bath to be functional, it is necessary to install a complex forced system Ventilation, organize the supply and drain of water and install doors.

Doors on the original bath of Maslov are used from heat-resistant glass. After that, you should purchase an original olives steam generator, which is installed at a floor height of 1.5 m.