Attractive I. original kitchenThe dream of many people. Someone to create a kitchen interior attracts experienced professionals, but, and someone is trying to equip everything himself. Not the last place in the kitchen plays a tabletop, about the manufacture of which will be told in this article.

Concrete countertop do it yourself

Today, countertops for the kitchen can be made of a variety of materials - glass, wood, concrete, etc. But it is the concrete countertop that has won great popularity, due to its attractiveness and durability of use.

Make a concrete countertop can be independently using hard materials for this. By the way, it is very detailed about how the countertop is done for the kitchen with your own hands, read on the site. Such an approach will save decent financial funds, because today it is very expensive to buy a kitchen countertop from a natural stone.

Before making the manufacture of concrete countertops, it should be done in the size of the size, the size of the angle, etc. This will help to avoid many errors and disappointment, with the manufacture of the table top with their own hands.

In addition, you should not forget that the concrete has a decent weight, so the worktop made of it for the kitchen must necessarily withstand the framework to which it will be installed. Otherwise, it will be necessary to additionally increase the frame with sustained supports from a bar or metal corner.

Composition of concrete and materials for the manufacture of table top

So, after all measurements are made, and the drawing of the manufacture of concrete countertops is ready, you can move directly to solving the question of the composition of concrete and materials for the manufacture of table tops.

To do this, you will need:

1. Portland cement;
2. Pure sacred sand;
3. Wooden bars 5x5 cm;
4. Plywood 12 mm;
5. Reinforcement grid (will be used as reinforcement);
6. Glue or sealant for gluing decorative elements to the tabletop to solve the issue - than to cover the concrete countertop;

From tools in order to make a concrete countertop with their own hands, you will need the most appropriate tools that will definitely be found in household Every "wizard for all hands."

First of all, the tools will be needed:

1. Metal spatula of different sizes;
2. Bulgarian and polishing circles on it;
3. Construction level with a tape measure for performing various measurements;
4. Screwdriver;
5. Self-tapping screw;
6. Dense polyethylene film;
7. Handsman on a tree and another small carpentry tool.

Now a few words about concrete composition for the manufacture of kitchen countertops. For the manufacture of concrete solution, the following components are needed, which are kept in such proportions:

1. Three parts of sifted sand;
2. Two parts of Portland cement brand not lower than 500;
3. One part of a concrete plasticizer on a polymer basis;
4. N - water, depending on the number of all components components. Concrete solution for a table top should not be too liquid, it must have a certain degree of viscosity.

Concrete tabletop manufacturing process

First, it is necessary to collect a formwork for a concrete countertop, which will be poured with a solution. It is made either from plywood or from plastic sheets. Of course the second option is preferable because concrete solution Poor sticks to plastic.

The dimensions of plastic sheets or plywood must have strictly the dimensions that were previously listed in the drawing. It is necessarily on the perimeter of plywood attached by means of a timber with a thickness of 5 cm. If you need to make a concrete tabletop greater thickness, then the thickness of the timber increases accordingly.

If after assembling the formwork for the countertop, between her constructive elements There are gaps, it is desirable to close, using silicone sealant for these purposes, or any other suitable for working with some specific material.

If it is necessary that the countertops have rounded edges, it is necessary to insert small inserts from plastic in the form of a semicircular in the edges of the plastic in the form of a semicircle in the edges of it. Then, it is necessary at a height of 3 centimeters from the formwork surface to fix the metal grid for reinforcement.

However, before installing the reinforcing mesh and the fill of the concrete solution in the form of the table top, its base and the sides are recommended to lubricate with machine oil. After the formwork is completely filled with concrete solution, it is necessary to cover it from above with its polyethylene film and leave for at least ten days for a period of drying.

Polishing and grinding concrete countertops

The grinding of the concrete countertop is performed by means of an angular grinder (grinder) with a polishing disk installed on it (as well as grinding marble at home). It should be known that at different stages of grinding concrete countertops, various discs apply.

At the initial stage, for the removal of the main unevenness of the countertop, a rough disk is used. Then exclusively disks 50 and 100 units (for finish finish Kitchen countertops).

After the grinding of the concrete countertop is complete, it is followed by the final stage of its polishing. A table top of concrete is polished with the same tool, but only with a much smaller disk abrasiveness (no more than 400 units).

The finished concrete countertop should have a sleek and shiny look. If you spend on its surface with your hand, it should not be felt completely no effervescent and roughness.

Video concrete countertop do it yourself

samastroyka.ru.

Countertop from concrete

From concrete you can make a tabletop, in appearance resembling a worktop from natural marble. Durable, resistant to external influences, waterproof material reveals their decorative opportunities.

Use concrete for the manufacture of kitchen countertops is not a new idea. In one of the articles, I already wrote, how to make countertops from concrete and battle glass bottles. Concrete is an excellent material that makes facing with ceramics, natural stone, wood. ... However, it is preferable to leave the natural surface of the concrete by subjected to its special processing.

Composition of concrete mix

The appearance of the tabletop from concrete depends on the cement brand, additives and their dosage. It is advisable to experiment, making several small trial samples in small formworks, and after their drying to polish the surface before obtaining the desired result.

The cement brand is not below M500. My-made, sacred sand up to 0.3 mm provides an even color and guarantees a good homogeneity of the mixture. Use rubble shallow fraction.

Collection of formwork

The formwork is placed on a solid support strictly by level. The base of the formwork is made of 20-mm plywood treated with a special lubricant that prevents the adhesion of concrete and the penetration of moisture. Instead of lubrication on the bottom, you can put a polyethylene film. The formwork board is performed from the bars with a cross section of 50 × 50 mm and fixed with self-drawing along the perimeter of the formwork. Self-tapping screws should be twisted through the fan from the outdoor side of the formwork. Bruks are treated with oil to facilitate their subsequent removal.

On site of the opening in which kitchen sinkTo the bottom of the formworks are screwed into the insert, chopped out of 50 mm polystyrene foam. After hardening the concrete mass, polystyrene foam cut out.

Preparation of mixes

The mixture includes cement, sand, crushed stone in a ratio of 1: 2: 3 with the addition of the SP-1 Superplasticizer in the calculation of 5kg per 100 liters of water.

Inorganic colored pigments are added to get the painted concrete: Blue cobalt, blue manganese, red, yellow, black and brown rigid pigment. White titanium dioxide is used for clarification. For staining of concrete, white portland cement is used in light tones, and to obtain a dark color - gray cement.

For uniform staining of concrete throughout the volume, it is recommended to add a pigment into a dry mixture and thoroughly mix. The amount of the added pigment is assessed by experiment. When imitating granite, inhomogeneous divorces on the surface of the table top are obtained by adding a dye diluted in the prepared concrete mixture diluted in water.

Prepare concrete mixture with small portions of 8-10 liters. To increase the strength of the countertops, use the reinforcing metal grid.

The prepared concrete mix should remind a thick paste, be not very wet and not very dry. Excess water causes the porosity of the product and reduces concrete strength. The lack of water leads to the formation of air bubbles and, therefore, emptiness.

After the fill, the tabletop is closed with a polyethylene film and dried for two weeks. Remove the formwork and remove polystyrene foam seven days of drying.

Tabletop surface treatment.

For tabletop processing used grinder machine With a capacity of about 1000 watts with a speed regulator. Grinding removes the surface layer of concrete and brighter highlights the rubbish particles. To obtain a smooth glossy surface, the grinding is performed in two stages of a disk with a carbidremium eye: first coarse-grained, and then with an average grain.

In the process of grinding a lot of dust is formed, therefore, all the work is performed in protective glasses and the respirator. For dust suction from grinding zone, it is recommended to use a vacuum cleaner.

After removal of dust, the surface is treated with a water-repellent tool using a brush or roller. Such treatment gives the surface water-repellent properties and prevents its pollution with oil and oil.

Pleasant news for those who decided to independently make a concrete countertop. On the russian market There is a threshold for tabletops from concrete Super Seal Concrete Encounter. After processing this composition, the tabletop from concrete will have the same operational properties as granite.

The final grinding is performed by grinding paste. The thin suede is fixed on the rubber disc and the thin layer of grinding paste is applied to it. Grinding is performed on small revolutions. At the same time, the grinders slowly move along the tabletop until the gloss. Sleep change as it is contaminated.

This article describes a method for manufacturing a tabletop from concrete under marble. The translation of the article from the Spanish magazine BRICO №172 was used.

The grinding process with the use of carbidrement skins is expensive, requiring a lot of time. Therefore, one more option is offered - concrete countertop surface facing ceramic tiles www.rmnt.ru/story/furniture.ru/256141.htm.

The entire process of manufacture of table tops from concrete can be viewed in video format. Film in English, but everything is clear without translation. If you have a slow Internet, then the film can be downloaded here (65.57 MB).

iDDeas.ru.

Concrete countertop do it yourself

Countertops made of decorative concrete and tiles ( left photo)

Despite the seeming difficulty, make such a practical item as a concrete countertop, do not make much difficulty with their own hands. Certray to this task will help the video in this article. As a result, you will have a durable working surface, and individual designer solution.

Sequencing

Highlights that should be considered before making a concrete countertop with their own hands:

• During operation, there may be actions that cause significant shock load on the table. For example, cutting parts of a meat carcass containing cartilage. Consequently, reliable reinforcement is required.
• Washing I. hobs panel For the kitchen, it is better to elect an overhead type. They do not need a special accuracy of the size of the opening, and the installation side is wide enough. It will hide the possible flaws, while the product itself will be securely fixed. Curling structures require specific equipment and work in the workshop.

Borfich such a wash 20-30 mm

• The tabletop under concrete has a considerable weight, which means the framework on which it will stand must have sufficient strength. To reduce the masses, the thickness must be tried to reduce without compromising strength.
• One of the stages of work will be grinding the surface that causes a large number of dust.

This instruction describes how to make a tabletop from concrete with your own hands on the place, or in the form of a separate product.

Drawing

Properly compiled plan - the key to the success of any case.

Drawing of corner countertops

In this case, the main factor is compliance with the size. The most complex is the transfer of an angle if it provides for the design. This will require a gentleer.

Tip! The most accurate and cheap coupler - two smooth slats at the desired height are inserted into the angle, pressed to the walls, and fixed in a convenient way.

The next stage is the preparation of the frame.

Basis, reinforcement and formwork

The best option The foundations will be moisture-resistant plywood or OSB plate. Cut exactly according to the drawing of the contour, will greatly alleviate the manufacture of tabletops from concrete with their own hands.

In cases where work is performed at the place, the base remains in the design, so all openings and planting must be prepared in advance. If the manufacture of tabletop from concrete is carried out not at the point of operation, the base is cut out only along the contour, and the cavities in the future working surface are limited to the corresponding frames.

Basis for remote manufacturing

The formwork of straightforward forms can be made of any mouseproof materials, as in the photo above. Curly products Well fit a profile for plasterboard.

Formwork using profile and foam

Tip! When the formwork device, the inner side is better to lay the polyfoam strips with a thickness of 20 mm. By laying reinforcing elements, you will need to deepen their edges into the foam. Such a "trick" will allow the decorative layer to grab the reinforcement.

A reliable tabletop from concrete with your own hands will only be possible if it is well disposed. The best, although not cheap material for this, is a stainless embosite sheet. Since its application is rarely found in such advice, it is worth considering PVL in detail.

Such sheets are made by crossing the slots in the usual steel sheet and its stretching. In this case, the jumpers between the slots rotate perpendicular to the sheet plane. Thus, the carrier becomes not the thickness, usually 2-3 mm, but the width of the jumper. For these purposes, a sheet 308 is suitable with a total 16 mm thick.

In view of the high strength of the PVL, it is used for the manufacture of stairs and overlaps.

Parameters that must match PVL are governed by GOST 21014:

Concrete countertops usually have a thickness of at least 50 mm. The ability of PVL to withstand such loads, reduces this figure to 25-30 mm.

It means that the consumption of material, weight and requirements for the frame, on which the kitchen countertop will stand from concrete, will also decrease. Complex contours under the insertion can be made with a grinder, or when buying on metal supplies.

Reinforcement with the help of PVL

Concreting

At the stage of fill, you need to pick up the composition of the concrete for the table top. The presence of PVL makes an unnecessary presence of rubble.

The statement that gravel and crushed stone have a higher compression strength compared to steel, fairly, but in this case it is useless. Concrete countertops do not compress. They beton meat and split nuts. Shock loads better withstand steel.

You can use a mixture of cement and granite sand with a shallow fraction, the so-called GROTSEV. By choosing these components, you will need to buy plasticizers that increase the flexural strength. Their retail price is high, the chemical composition of Glylotseva is unknown, it is easy to make a mistake. The process of "how to make a tabletop from concrete" can end the cleaning of its residues.

Assortment of plasticizers. How to choose?

In order not to risk, it is better and easier to buy ready-made sandbetone of high grades of strength, M400 and higher. This material is designed to fill reinforced foundations and designed to work with reinforcement. Just a suitable situation. All additives in it already exist.

It remains to mix the solution to the consistency of sour cream, and pour into the form. If further processing consists of a varnish or paint, then it is necessary to pour over the edge of the formwork, and immediately align.

In the case when it is supposed to use decorative concrete For the table top, or under the tile it is necessary to leave free space, the height depends on the decorating material.

Tip! When reinforcing PVL, it is better to leave 2-3 mm leaf protruding over the fill. They will ensure the connection of two layers in one, or damage the glue tiles. If traditional fittings have been used - you need to put on the surface of the soaked concrete plastic grid. Such a notch will increase the adhesion of the next layer.

The space is left under the finishing layer

After the fill you need to cover the shape of the film, and leave for 1-2 days. Further processing will depend on the finishing coating.

Lacquer

In this case, 2 days after the fill, they open the film, and leave the concrete countertops to full frost. Depending on the conditions, it may be necessary to a few weeks.

Concrete tabletop under varnish

The tabletop is grinning, ground, coloring or covered with lacquer according to the technology provided for selected materials.

Application tiles and stone

For decorating with tiles or stone, the kitchen countertop from concrete is dried in the same way as under the paint. After that, the product is removed from the form, installed in their place and look with decor.

Left under the foam and on the surface of the reinforcement or frozen notch will ensure reliable fixation of the stone elements or tiles.

Tip! If preference is given to tiled models, it is better to choose a floor stonework for gender, the most resistant to mechanical effects.

Decorative concrete

Provides the greatest spacious flight of fantasy in choosing: how to cover the concrete countertop. At the finish stage, you can choose a ready-made dry mixture of a lot of options offered on the market.

Or manufacturers on the basis of the same sandbetone with the addition of dyes, sea pebbles, quartz, marble crumb, any decorative elements. The only thing that should be considered when choosing inserts is a tabletop from decorative concrete should be polished.

Tip! The composition of the finished mixtures includes additives that increase the hardness of concrete, facilitating grinding work and increase the life of the surface until the next grinding. The optimal option is the choice of suitable color and textures from ready offers. The assortment of inserts is better to entrust your own fantasy.

Inserts from wood and artificial stones (right)

Work on the final fill, you need to spend a day after filling the base layer. Concrete in the form must stop being liquid, but not yet frozen completely.

Deciding with the composition of the finish layer, you need to remove the foam from the formwork. A decorative concrete is flooded with a decorative concrete liberated along the edges and to the top level and align the surface. The form is closed again for two days. After removing the film, give the product to completely frozen.

From this video you will learn how to make a concrete countertop with your own hands.

Grinding

Final Stati. It is grinding and polishing table tops from concrete. Manually execute such work can only be enthusiast. The Chinese grinding machine will die at half the path.

Final advice! Good professional grinding can be rented. During the weekend, the fruit of long labor will be completed.

Independent production Countertops from concrete - albeit a painstaking, but not a difficult matter. The price of the product will be several times lower than the workshop ordered in the workshop, and moral satisfaction at the same time higher, and even grandchildren will serve.

beton-House.com

Cakes from concrete with their own hands - manual instructions

Recently, concrete countertops that can give your housing exclusivity and individuality are becoming increasingly popular. Of course, you can invite designers and builders who will return your dreams and desires to life. But, showing the "miracles of skill", you can make a similar product own forceswhich will not ultimately give up an analogue of marble.

Preparatory stage

The countertop is a working surface that is an integral part of any kitchen. At the first stage, it is necessary to decide on the size of the future product, as it should be harmoniously combined with the already existing interior. Also, when creating a kitchen countertop with its "golden" hands, you need to make it so that it fits as close as possible to the wall. To achieve this, you must all scrupulously measure and make an accurate drawing.

Tip! If you want to avoid problems in the manufacture and installation of the countertops, it makes sense to divide all the product into several elements and take into account this in the drawing, that is, the formwork will be united, but divided into sections.

Also when designing countertops kitchen concrete, it is necessary to take into account a very important point: junctions of parts finished product Must be clearly accounted for transverse elements of the table frame (otherwise there is a probability of cracking).

Necessary materials and tools

For the manufacture of table tops from concrete, the following materials will be required:

• cement;
• sand (small, sinking);
• gravel (or clay);
• wooden bars (size 40 x 40 or 50 x 50 mm);
• boards;
• moisture-resistant plywood, laminated chipboard with a thickness of 18 mm;
• metal grid (for reinforcement);
• silicone sealant;
• decor elements;
• glue;
• olife, vegetable oil or special lubrication fluid;
• pigments are dyes (if you wish to have a color surface).

You will also need the following tools:

• screwdriver and self-tapping screws;
• bulgarian;
• hacksaw;
• grinding machine with abrasive discs;
• construction mixer or electric drill with a special nozzle;
• building level;
• rule;
• roulette;
• capacity for the preparation of the solution;
• respirator, safety glasses and rubber gloves;
• putty knife;
• a vacuum cleaner.

Order of work

The order of work on the manufacture of the table top of the house from concrete is your own hands:

• we make formwork for casting the future table top based on the previously made drawing;
• we install it on the workbench, "goats" or desktop (correctness of the level);
• we scatter the shape of olifa or vegetable oil (it will facilitate the extraction of the finished product);
• at the bottom of the decorative elements (here is a space for your fantasy) and fix them with glue (it is these items that will be subsequently facial side Your countertops).

• we are placed in the form of a metal mesh that is fed to the edges of the formwork with a thin wire in such a way that it is raised to a height of 25-30 mm from the bottom of the form, and in the process of filling the solution was under it and above it;
• we prepare the concrete mixture using the main recipe (that is, which includes sand);
• fill in the form.

If the form is filled with a solution of layers, then follow the following order:

• cooking a solution for a layer that will be the front surface of your countertop (components correspond to the main recipe);
• pour the prepared solution into the form;
• we put the metal grid (it is not necessary to lift it);
• we prepare the solution for the main layer, in which, instead of sand, add gravel or clamzit (for cooking it is given no more than two hours, since the liquid stage of concrete lasts not so long);
• fill it into shape.

• place B. liquid concrete Laming or corners so that the countertop can be subsequently attached to the legs or walls of the table;
• we are tamped with the help of a trowel and clean the surplus rule;
• we cover the formwork by a sheet of laminated chipboard, having pre-lubricating it with oil;
• on top of the whole construction shelter with polyethylene film;
• we leave everything alone for 7-9 days;
• we exempt from polyethylene;
• we remove the formwork;
• the product is left for additional drying (5-7 days);
• if you need to cut the tabletop, we do it using a grinder;
• grinding;
• polished;
• if the tabletop consists of individual elements, after their assembly, we close the joints with a special silicone or moisture-resistant grout.

If you have any questions about the process of manufacturing tabletop kitchen from polished concrete, then you will help you video.

Create a form (formwork) for the manufacture of table top

In order to make the tabletop with their own hands, in the end, brought you satisfaction and did not disappoint you with high-quality characteristics, it is necessary when creating its form to clearly observe all the sizes specified in the drawing. The algorithm of work is as follows:

• cut out a sheet of moisture-resistant plywood (or laminated chipboard, fiberboard or MDF) with dimensions exceeding the dimensions of the future tabletop by 10-15 cm on each side;
• on the entire perimeter, we make firefighters with a height of 50-60 mm (such a thickness is optimal for the future tabletop) using long boards (50x30 or 60x30 mm), which put on the edge and fasteners using self-tapping screws; To enhance the design from the outside in the corners and in the middle, we mount two or three bar or metal corners;
• as a result, we obtain the container, the dimensions of which are clearly correspond to the dimensions of the countertops;
• all joints, seams, gaps and cracks in the form thoroughly close using silicone sealant;
• if you wish to make the finished product rounded forms, we recommend using inserts from plastic or silicone, which are installed in the angles of the form and are removed after the concrete solution is dry;

• if the working surface is planned to install the sink, then the presence of free space For her (for this, at the bottom of the form, it is necessary to draw a rectangle corresponding to the sink sizes; fasten the bars of 50 x 50 or 50 x 60 mm; the drawing lines should remain with the outside of the bars), and also make a hole under the mixer (for this you need a pipe with a diameter 35 mm and 50-60 mm long).

Tip! For the tabletop, it is better to choose an overhead sink so that in the future it is not to suffer from the landing facade, which is available in the embedded models (but do not forget to take into account the presence of a horizontal side of the overhead shells throughout the perimeter at the stage of drawing preparation).

To create a formwork, it is necessary to come carefully, without missing anything, since the concrete countertop will completely repeat the uniform in which the solution will be covered: all irregularities, bends and notches will be spoiled appearance finished product.

Cooking a concrete mix

It includes:

• 2 parts of cement (M 500);
• 3 pieces of sand (sifted);
• plasticizers;
• water (so that the mixture has acquired a creamy form).

If the volume of the solution is not large, it is possible to prepare it in a small container (for example, in a bucket) and stir using a construction mixer using a special nozzle. If the size of the finished product is large, that is, it makes sense to apply a concrete mixer.

Important! It is necessary to stir the mixture very carefully.

If you want to make a tabletop made of concrete with your own hands some kind of color, then you need to add pigments to the solution - dyes. But remember: To give concrete uniform painting, pigments should be added to a dry mixture; and to obtain divorces, as on marble, it is recommended to dissolve coloring substances in water, and then mixed with the finished concrete mixture.

Tip! If you doubt that the mixture will be not a consistency that is necessary, better go to the store and purchase ready-made, on the packaging of which all proportions will be indicated.

Grind and polished

To make a tabletop from concrete attractive and similar to granite or marble, carefully cast it with a special typewriter using diamond discs. The process looks like this:

• put the tabletop exactly face up;
• remove the main irregularities using a rough drive;
• with special care processing facial surface products;
• spin disc, abrasiveness - 50 units;
• we produce the final grinding disk - 100 units;
• we carry out polishing (it is better to polish with discs - 400 units);
• on the final stage Apply the felt circle.

In custody

Our step-by-step instruction outlined above will help you make it very beautiful. working surface for kitchen. Make yourself, and then using your experience, tell me to others how to make a worktop.

If you want to become a winner of unique and very beautiful furniture, pay attention to the epoxy resin table. Such products have undeniable advantages, may have a diverse design and form. We offer to get acquainted in more detail with existing varieties, order of choice of the finished product and the manufacturer's sequence with your own hands.

Read in the article

Table of epoxy resin: advantages and disadvantages

The choice in favor of the tables from epoxy is done due to their indisputable advantages. Such products:

• exclusive;
• may have a variety of design;
• allow us to use a variety different materials as decor;
• adjust the formation of a decorative layer of various colors. At the same time, it can remain transparent. If desired, a phosphoresis paint can be added to the composition of the poured resin;
• possess high mechanical properties;
• do not deform;
• can be operated in rooms with increased level humidity;
• well hold the form;
• allow cleaning chemicals.

The disadvantages should be attributed a high price. Buy the table due to a slight amount is not possible. The formation of each product is carried out using a large amount of resin, which helps to increase the cost. It is also worth noting high requirements for compliance with manufacturing technology. A minor retreat can provoke air bubbles.

Countertops from epoxy resin, wood and other supporting elements

In the process of producing products of this type, the fill of the composition is carried out on the basis, which can be used old table, piece of timber, chipboard and other materials. Pretty popular countertops formable from wood and. We offer to get acquainted with possible options.

Wooden table with decorative filling and epoxy resin

Beautiful drawing natural wood, emphasized by epoxy resin, in itself looks quite beautiful. Especially if there is on the surface different damage and emptiness that in the production process are filled with the composition. If you add decorative filling, you can become the owner of exclusive furniture. As elements of decor, you can use coins, cones, acorns, pebbles, beautiful branches, photos and other items. We offer you to see photos of tables from wood and epoxy resin, when the decorative elements were used, and which you can use as an idea for subsequent embodiment.

Table of slab and epoxy resin: features and examples of execution

SLES is formed as a result of longitudinal sawing of trees. As a result, a wooden reservoir is formed with a unique pattern and arbitrary shape. In the process of production from Slab, individual elements are connected to each other with epoxy resin, or the table top is drawn up in such a way that the wood is located in the center. We offer to see photos of interesting solutions:

River-river from epoxy resin: distinctive features

Similar products received their name thanks to the characteristic design. The epoxy river is inserted in the center of the countertop, the appearance of which resembles the river flowing through the mountain gorge. Most often, such products are made from the array. Insert is performed blue or green with uneven edges.

We offer you to watch a video that will help to figure out how to make a countertop from epoxy resin with your own hands:

How to choose a product if you are decided to buy a table of wood and epoxy resin: current tips

If you decide to buy and epoxy resin, it is necessary to immediately decide on its size and configuration. Optionally acquire products correct geometric shape: Manufacturers offer interesting asymmetric options. When choosing, it is necessary to take into account the stylistic design of the room.

What to do if it is decided to make a table from epoxy resin alone: \u200b\u200bdetailed instructions

If the cost of the finished product seems to you enough, try making exclusive furniture yourself. To do this, it is enough to deal with technological features and the nuances of the process. We offer to learn how to make a table of epoxy resin with your own hands without attracting a wizard.

How to make a supporting design for countertops: Highlights

The frame can be made of metal either tree. When performing work, your own hands are quite popular wooden tables with epoxy resin, since in this case it is not necessary to connect to the connection of individual items welding machine. The form and size of the reference design are selected taking into account the dimensions and the form of the future table top.

Attention!If the table is without a reference surface, this item can be skipped.

How to properly prepare a form for fill: a sequence of actions

The base of the countertop can consist of separate elements go to represent a solid canvas. In the latter case, the fill of the composition will be carried out exclusively at the corners and in the existing openings with the formation of the characteristic figure. Works are performed in the following sequence:

Illustration	Description of action
	Depending on the selected option, a form for fill is formed. The edges of the inner surface of the form cover with a dense film so that the frozen composition is well behind the base of the form.
	We establish the prepared formwork on the basis. We place the decorative elements inside. Degrease the contour all the joints, whose tightness should be ensured before the fill.
	Gift adhesive pistol All mating surfaces, carefully controlling the quality of the compound being formed. For this purpose it is worth using silicone sealant.

How to prepare an epoxy resin for pouring countertops: Observe the instruction

To prepare the composition you should mix both components. It is very important to observe the proportion recommended by the manufacturer and mix everything thoroughly so that the resin has a suitable consistency. It is worth calculating in advance which amount of resin will need.

Tip!When using special mixers for making a solution, work on small revolutions to prevent the resin saturation with air bubbles.

Choosing a suitable epoxy resin for fill countertops, pay attention to ArtLine Crystal +:

Read more for Ozzovik: https://otzovik.com/review_6603877.html

How to pour an epoxy resin table top: process features

If the thickness of the formable layer is less than 5 cm, the composition can be pouring in one time. For thinner products, two layers are required. The second should be poured after 1-2 days after the fill of the first, but before the first layer fully solids. To eliminate the formation of voids in the corners of the future product, they should be mixed in advance by the prepared solution.

Attention!To form a fine trickle, you can use a thin stick, which is omitted in the form in the process of filling the resin.

We remove all bubbles that rose to the surface. We cover the finished tabletop to eliminate the random hit of foreign objects. We expect to completely dry the composition.

We offer to watch a video in which it is described how to fill with an epoxy resin countertop:

Finish processing is worth exposing all surfaces of the table top. Do not use a coarse sandpaper, as it will be difficult to polish the surface. It should work at low speed to prevent the countertops overheating.

Tip!In the processing zone during polishing, pour water to ensure timely heat removal and prevent the circles.

We think you will be interested in a video describing the process of manufacturing a table of epoxy resin with your own hands:

Useful recommendations for working with epoxy resin and safety

When making tables made of wood and epoxy resin, it should be remembered that:

• in conditions high humidity The composition is hard hard. The likelihood of the formation of bubbles on the surface is significantly increased;
• increase polymerization rate by increasing the air temperature in the room. It is not recommended to produce direct heating: the formed coating may be brightened.

Attention!Epoxy resin toxic, and therefore the fill of the composition should be performed in a well-ventilated room.

To ensure your own safety should also:

• perform the fill of the composition in gloves and special clothing;
• with grinding finished surface work in protective glasses and respirators;
• if you get a drop drops on the skin, it should be removed immediately with water and soap or denatured alcohol.

How to care for the epoxy resin table: Useful Tips

For an epoxy countertop as long as possible preserved its presentable appearance and strength characteristics, it is necessary to maintain it properly. It is advisable to use dry soft cloth for care. Preferred wool and flannel. Strong pollution can be removed using a wet cloth, and then the surface should be wiped out dry. The remaining droplets of water can provoke the appearance of spots.

Attention!The use of compositions containing alcohol or acetone is unacceptable.

It should be avoided by the fall of heavy items on the table surface from liquid glass. Hot mugs and plates are better to put on a special stand.

Send the material to you on E-mail

If you want to get original, not similar to standard options, pay attention to such an unusual object of the situation as a table of epoxy resin. Such products are always a masterpiece that will attract the attention of your guests. Editorial board prepared for you an overview of the most interesting design techniques and detailed instructions on self-making.

Exclusive products with unique design are obtained from epoxy.

Epoxy resin is a chemically complex multicomponent product that has become actively used in decorative purposes relatively recently. The advantages of this material were noting the attention of furniture manufacturers:

• high strength and resistance to deformation and ultraviolet, the absence of chips and cracks during operation;
• relatively low price for the source material;
• the surface is resistant to the destructive effects of moisture;
• ease of care;
• the possibility of diverse processing and filling;
• visual expansion of space due to glossy coating.

Illustration	Description of action
	Before starting work, decide on the type and brand of fill. Try different compositions in combination with chosen wood and choose the best.
	An important condition for high-quality pouring is a smooth shape with sides and a coating that does not stick to the resin. Form installation must be checked construction level.
	In order for the dust in the process of drying each layer, the dust fell on the resin, it will take to prepare the lid for the shape, for example, a sheet of plywood.
	Wood for fill need to be treated, polished and coat with mourn and varnish.
	Make a tree into the form and check its location by the construction level. Reliable fix the material.
	The process of kneading the fill does not tolerate the fuss. Use for mixing the nozzle to the drill, repeatedly overflow the composition of the bucket in the bucket so that there are no non-shaped components on the walls.
	Carefully pour the first layer of epoxy.
	Check the fill thickness line. The instruction from the manufacturer shows the maximum thickness. If it exceeds it, the resin can boil or deform when drying.
	The air bubbles formed in the process are driven by a plastic fork or a needle.
	After the first layer froze, the surface is wiped from dust with a rag with acetone.
	Perform the second and subsequent layer of fill in the same algorithm.
	The last layer is the thinnest, it is applied with a brush.
	After complete frost, you can cut and grind the edges of the table top.

Important points in work with epoxy

In order for the countertop to be like you, you need to follow the execution of some recommendations while working:

• epoxy fastest frozen in heat;
• it is impossible to warm up the fill from above, it can deform;
• for the time of frozen, limit access sunlightso that the resin is not yellow;
• consider that the composition is very toxic, take action measures;
• when kneading the fill, do not make squeezed and sharp movements so that bubbles do not appear;
• do not leave a flood-up table top in the cold - it will slap;
• so that the resin does not secrete toxins, cover the finished layer of protective varnish.

For details on how do it yourself, make a countertop from epoxy resin, in the video below:

Rules for maintenance of equipment from epoxy resin

Wipe such countertops only with a soft cloth. Do not allow the surface of a liquid to remove varnish, alcohol and hair varnish.

Where can you buy a table of wood and epoxy resin

There are several online stores offering mass production products. Better choose those of them that are located in your city. Long-term transportation of such objects is usually badly affected by their state.

Prices for wood tables and epoxy resin: from copyrights to factory models

Tables and tables with fill from epoxy on one of the most famous sites of needlework masters stand from 20,000 rubles, as of October 2018. The price depends on the complexity of the work. There are many options with complex inlaid and multicomponent design, to buy such epoxy resin tables for $ 50,000-150,000 rubles. As for the factory models, then, for example, the price of tables from Estwood begins with 36,000 rubles. and comes to 140,000 rubles, depending on the size and purpose.

Production technology from concrete is popular in both industrial and private construction. From this material you can pour window sills, steps for stairs, floor tiles, countertops, and so on. The main thing is that any thing can be made independently without attracting specialists from the side. Let us give an example, how the tabletop is made of concrete with your own hands.

Like any construction processThe manufacture of tabletops from a concrete solution is divided into several stages. Each of them is very important, it is impossible to allow some operation to be missed.

Preparatory process

Preparation is to acquire the necessary materials and tools. To begin with, all the same components that are needed for the production of a standard concrete solution are purchased. Namely:

• cement;
• sand;
• crushed stone;
• water.

Since the countertop is decorative item, it is worth considering the question concerning its color design. For example, if you use the usual gray cement, then the table top will be gray. The benefit today there is a large number of colors that can be added to the mixture, picking up in a color shade.

Main materials

To increase the strength of the concrete countertops, a metal reinforcing frame in the body must be put into the body. To do this, you will need steel wire with a diameter of 2-3 mm. To assemble the grid from this wire, you need to link it, for which you need a knitting wire. For fastening the frame, you will need self-tapping screws.

The worktop must be poured into the formwork. It is made of several different materials. The main is a sheet of moisture-resistant plywood with a thickness of at least 12 mm. Instead of plywood, you can use laminated chipboard or MDF.

Please note that the strength of these materials should be high. A small curvature will immediately appear on the concrete product itself.

To create a thickness of the countertops, boards with a cross section of 50 × 30 mm and several wooden bars of 50 × 50 mm are required.

Since the washing will be installed on the kitchen countertop, it will be necessary to make a hole for the mixer. For what will be needed plastic trumpet 35 mm diameter and 50 mm long. Usually the diameter of the mounting nozzle of the mixer is 35 mm.

Instruments

For the manufacture of tabletops from concrete, the following tools will be required: shovel, rule, trowel, spatula, bucket, construction mixer (if a small volume is mixed) or concrete mixer.

To assemble the formwork you will need a saw and a screwdriver. For the manufacture of Armokarkas - pliers. Do not forget that all elements of the formwork will have to accurately exhibit in advance drawing, so the line, the level and pencil will also need. To measure the sizes of the future countertops, you need to make a roulette.

Creating a drawing

Draw sketch or before preparation or after. It is important to accurately measure the space where cabinets with a tabletop from a concrete solution will be installed. If a kitchen furniture It will be installed in the corner of the room, then a convincing request - align the angle at 90º. This is not only the criterion for the quality of the repair carried out, but also the simplicity of the installation of furniture is accurately by wall planes.

Now the routine is measured by the boundaries of the tabletop. Very often, the working area of \u200b\u200bthe kitchen has a shape curved with an adjacent wall. If such a form (angular) is accepted, it is better to divide the element into several sites and to make your worktop for each part. In this case, the formwork will be united, but divided by plots.

The main thing, the boundaries of the plots to make transverse, which should accurately coincide over the walls of kitchen tumb. Only so you can avoid the formation of cracks. The monolithic countertop will weigh a lot that will create inconvenience when installing it.

Install a sheet of moisture resistant plywood on a flat horizontal surface. It can be a table. Now transfer all sizes from the drawing to this sheet, for which you use a ruler and pencil. At the edges of the lines are installed on the edge of a 50 × 30 mm board. They will determine the height of the concrete countertop, which will be equal to 50 mm. Why exactly this size? Reducing the thickness will reduce strength. Increase - to enhance the weight of the product. Therefore, 50 mm is the optimal size.

Since the concrete solution will create big Pressure On the walls of the formwork, you need to fasten them well. Here are two options:

• use 50 × 50 mm bars for mounting;
• install metal corners.

In the first case, the bars are attached along the corners of the design. If the installed board is long, then 2-3 bar are fixed in the middle evenly from each other along the entire length of the board.

As for the sinks for washing, it is necessary to pay attention to the type of the purchased instrument. There are embedded washes, there are overlays. They differ from each other because the overlap in the design there is a horizontal side of the entire perimeter of the plumbing device.

For overhead models

If this option is installed, then the sink turns over, stacked on the plywood sheet and stroke is performed on its side. Then the width of the board is measured, for example, it is 3 cm, it means that inwards are deficked exactly the same form at a distance of 2.5 cm.

For embedded

In the case of an embedded sink, the outlines is applied by its edge. Now the lines are installed bars of 50 × 50 mm, which are attached to the plywood screws. Please note that 50 × 30 mm boards are installed outside the applied lines, and in the case of a 50 × 50 mm sink, 50 × 50 mm are installed inside.

And one more point - in the embedded shells there is a landing chamfer, which is not easy to do. Therefore, someone who is going to make a tabletop from concrete with their own hands, it is recommended to choose an overhead model. It remains only to glue the pipe at the installation site of the mixer.

It is necessary to immediately make a reservation that the reinforcing frame of steel wire should be as a grid with a cell of 25 × 25 mm. At the same time, from the plywood sheet and from the edges of the formwork, it should also be located at a distance of 25 mm. Therefore, pieces of wire are cut with these reservations.

A polyethylene film is placed in the formwork, the edges of which are breeding on the boards. Please note that the film lay down smoothly without folds.

Installation of the carrier design

Now the carcass itself. It can be done separately, and then install on the place. You can hold it directly in the formwork. Installation at a height of 25 mm is performed using self-tapping screws. For example, the second installation option.

Screw the screws in Phaneur around the perimeter of the formwork every 25 mm. Alignment of height caps is made using a ruler and level. After that, slices of wire are already screwed to the self-draws. In places intersection for fastening, knitting wire is used.

Almost everything is ready to start pouring a tabletop from concrete with your own hands. It remains only to handle the joints between the elements of the formwork of the sealant. It is important here that this material filled the gaps and gaps.

If there is a need to make rounded rounded angles from the table top, then in the place of docking two boards 50 × 30 mm, that is, the corner is installed. And the space of the angle, limited by the pipe and two adjacent boards, is filled with sealant.

Concreting

There are two ways to fill concrete.

1. Fully filling the formwork.
2. Layer.

In the first case, the concrete is prepared according to the classic recipe: 1 part of the cement, 2 parts of sand (pure river), 4 parts of a large aggregate (in this case, it is best to take a marble crumb), and 0.5 parts of the water. First, cement and water are mixed before the formation of cement milk, then other components are added portion. Mix the solution is very careful.

The table top cooked from a concrete solution may look very original. The main thing is to properly approach the design of its face. For example, it is possible to put on a polyethylene film the pieces of broken glass, beads, decompose the copper wire or well-fiber cable veins patterns.

It is necessary to secure these decorative elements with glue, so that they do not shift during the fill. The brand of glue is not important, the main thing is that it fastens well.

For the first facial layer, a solution of fine sand is required without large fillers (gravel, rubble). Waters should be slightly smaller than in classical recipe. Thus, it is possible to avoid the appearance of pores. But too little to add water is also impossible, because it can lead to the formation of cracks.

Therefore, if there are doubts that the solution can not be like that, it is better to purchase a ready-made dry mixture for a screed. On its packaging there is an instruction where it is indicated how much water needs to be added. Mixing must be carried out on small turns. And it does not matter, the process is made by a mixer or concrete mixer. This solution is poured on a third or half from the height of the formwork. Wait for it will dry, no need.

Pouring the main layer

The fill of the main carrier layer can be made in half an hour. There is no restrictions to the composition of this mixture. It can be a classic recipe in which, instead of gravel or rubble, you can add clamzit to facilitate the entire design.

After that (it does not matter or the second one), the tabletop from concrete needs to be covered with a film. After a day, the film is cleaned, and the slices of wet fabric are stacked on top. In two days, you can disassemble the formwork.

If the table top made of concrete is made without a decorative layer, then its face must be seized. It is not worth using for this. It is better to apply the grinding machine of an angular type. It is more convenient for horizontal surfaces. Plus, they will have to buy several grinding circles.

First, the plate is grinding with a coarse-grained circle. Then go to fine-grained. And the polishing is best produced by the felt circle. If you need to hold the table top, then the Bulgarian is used with diamond disks.

If small recesses were formed on the surface of the slab, they can be removed, applying a special sealing mixture on an acrylic basis. After its drying, an additional grinding is performed.

This is how the concrete countertop is made with your own hands. We will not assure that this process is simple. It is complicated and requires attention and accuracy.

Almost every hostess dreams of kitchen interiorwhich would be both functional and cozy at the same time. An important element Any kitchen is a tabletop. They produce it from a wide variety of materials, the greatest popularity of which received concrete. You can make the product and your own hands, not attracting other specialists. The tabletop from concrete has numerous advantages.

Highlights

The technology of manufacturing concrete products is very popular in private construction. The horizontal working surface made of concrete can be described as a stone of artificial origin, obtained by molding and solidifying the mixture, consisting of the following components:

• high quality cement (acts as a binding substance);
• fillers various sizechosen by color trait;
• low salts liquid;
• special additives that allow you to improve the quality of concrete.

Those who are going to make a tabletop from concrete with their own hands, it is important to take into account several important moments. Operation of the product involves a large shock load on it, for example, during the cutting of a meat carcass with cartilage, that is, a reliable reinforcement is necessary.

Choosing washing and cooking panel, it is worth paying preference to the top. Such a design does not require a special accuracy of the size of the day, while the installation side has a sufficient width. Possible flaws will be hidden, and the product will get reliable fastening. As for mortise structures, it takes to install them special equipment. Such works are carried out exclusively in the workshop.

The concrete countertop weighs a lot, therefore, its base should be quite strong. To reduce weight, you need to try to shorten the width without prejudice to strength. An important stage is grinding, accompanied by a large amount of dust.

Countertop is decorative elementTherefore, it is important to think over its color design. If you use gray cement, then the product will get a similar color. Fortunately, today there is a diverse selection of kernels designed to add to the mixture, so you can choose the most suitable shade.

Preparatory stage

Preparation is a mandatory stage. Must be purchased necessary materials and tools. Primarily, components are harvested from which concrete solution is prepared:

• sand;
• cement;
• crushed stone;
• water.

So that the horizontal surface is more durable, you need to put a metal reinforcing frame into solution. It is not necessary to do without steel rods with a diameter of 10-12 mm. To make the grid, you will need knitting wire. With the help of self-samples, the frame is mounted.

The table top is poured into the formwork made from several different materials. The main thing is the sheet of moisture-resistant plywood, the thickness of which should be from 12 mm. Alternatively will suit the laminated chipboard. It is important to take high strength materials, even insignificant curvature will affect the countertop.

Do not forget about the hole for the mixer. To make it, you will need a plastic tube with a length of 50 mm, which has 35 mm in diameter. The standard mounting nozzle of the mixer has a diameter of 35 mm.

Creating a sketch and preparation of formwork

You can draw a drawing as before preparatory stageAnd after him. We need to accurately measure the place where the furniture with the tabletop will be located. If you plan to put them in the corner of the room, it is important to align the angle at 90 degrees. This will not only make repairs better, but also to simplify the installation of cabinets, placing them accurately by wall planes.

The boundaries of the installation of the product are measured by a tape measure. The working area of \u200b\u200bthe kitchen often has a curve form. In this case the best solution It turns out the separation of the element into parts when its tabletop is done under each individual part. At the same time, a single formwork is divided into elements. It is important that the boundaries of the plots are transverse. They must coincide on the walls of the Tumb. This will prevent the occurrence of cracks. A heavy monolithic countertop made by hand is more complex in the installation.

To prepare a formwork, you will need to position the pelvic to the moisture on a convenient horizontal surface, for example, on the table. Dimensions from the drawing are copied to the sheet. At the edges, 50 × 30 mm boards are set, they are needed to determine the height of the product (50 mm). This is the most suitable size. If it is increased, the mass of the product will rise, and if you decrease - the strength will deteriorate that in no case cannot be allowed.

The walls must be reliably fixed, because the concrete solution will put pressure on them. You can use metal corners or apply 50 × 50 mm bars, securing them in the corners of the product. If the board has a big length, it is advisable to fix the constructions in the middle of another 2-3 bar.

Washing hole and reinforcing frame

The sink can be built-in or invoicing, the latter has a horizontal side of the perimeter. If an overhead type is put, the product turns over, is placed on the plywood sheet, and the stroke is made on board. Next, it is necessary to determine the width of the side, for example, it is 3 cm, then a similar form is postponed at a distance of 2.5 cm.

If the washing of the embedded type is supposed, it is necessary to apply the outline on the edge of the sink. Then the lines are set by 50 × 50 mm boards, they must be attached to the plywood using self-tapping screws.

In an embedded car wash, there is a landing chamfer, which is quite difficult to do. So, the manufacture of tabletops from concrete involves the use of an overhead structure. It is only necessary to fix the pipe at the place of installation of the mixer.

The wire frame is a grid whose cells are 25 × 25 mm. At the same time, it must be at a distance of 25 mm from the edge of the formwork and plywood. Consequently, it is necessary to cut the wire taking into account similar nuances. Polyethylene is put in the formwork, its edges are triggered in the board. It is important that the polyethylene film does not have folds and lay smoothly.

The frame is collected in the formwork or separately. If the installation is required at a height of 25 mm, then best do it by means of screws. There is another option to install. In the plywood sheet around the perimeter of the formwork every 25 mm screws screws. Level and ruler allow the level of the heap height. Next, the pieces of wire are attached to self-drawing. In places of intersection, knitting wire is activated.

Before pouring a tabletop from concrete, you need to handle joints. It is important to ensure that the sealant filled the gaps and gaps. When you need to get rounded corners, then in the place where two boards are joined, a pipe is put. After that, the sealant is involved.

Concrete can be pouring, completely filling the formwork or layers. Choosing the first method, it is necessary to mix cement, sand and large aggregate in proportion 1: 2: 2. It is advisable to use marble crumb as a placeholder. 0.5 parts of the liquid are also taken. Initially, water and cement should be mixed, then the remaining components are added. It is necessary to very carefully interfere with the solution.

Concrete countertop can have very original view. It is important to competently arrange its face. Suppose you can put on polyethylene:

• glass fragments;
• coins;
• beads;
• cable veins;
• wire.

Great fiberglass looks great. A similar decor is necessarily fixed with glue to warn the offset during the fill. When creating a first layer, a solution of fine sand is used, which does not include any large fillers. For example, such as crushed stone or gravel. Liquids are better to take a little less than it is proposed in a classic proportion, this will prevent the formation of pores. Lack of water is also unacceptable. Because of this, cracks may appear.

If there is no confidence that the solution will work, it is better to use the bought mixture. On packaging of this composition, there is usually an instruction, you can find information about how much water is added. It is better to mix on small revolutions. Pulling the concrete solution is needed by a third or half of the total height. It is not necessary to wait for drying.

After 30 minutes, you can start the pouring of the main carrier layer. In this case, the mixture can be prepared according to the traditional recipe, which assumes the addition of clay instead of rubble and gravel, to give the construct ease. After the fill, the concrete horizontal surface is covered with a film, which is removed after 24 hours.

From above there are pieces of wet fabric, you can use a wet towel. This contributes to the slowdown in the solidification process and improves strength.

You can disassemble the formwork in two days, but the specialists still recommend waiting a few more days. If difficulties have arisen when removing the form, it should be carefully pushed to her edge. You can also use brick as a support.

If a concrete product Does not assume a decorative layer, the front side is carefully polished. The grinding procedure allows you to remove the remaining irregularities and remove the excess glue. You should choose to work such clothes that will not be sorry to spoil. Bulgarian for such purposes is better not to use. It is preferable to stop the choice on the grinding machine of the angular type. Such a device is very convenient in working with horizontal surfaces. It will also be needed to purchase several grinding wheels.

First work with coarse-grained polisher, then they take fine-grained. Polish preferable for felt circle. If necessary, it is used to trim the product apply a grinder with diamond disks. During grinding, you must use safety glasses and a respirator, as well as a vacuum cleaner.

If you cannot polish the surface, it is necessary to primitive it, covering a special varnish. It is preferable to use a roller. It is important to ensure that the work element is wet. It is not necessary to hurry, movements should be neat and uniform.

With the appearance of minor recesses, the situation can be fixed with a special sealing mixture having an acrylic basis. All remaining openings and emptiness are filled with this composition. If necessary, you can cover the surface with an additional layer. At the end, the countertop is rubbed with wax. Having waited for his frost, should be wiped the surface with a clean rag.

Some wizards in the manufacture of concrete countertops do not create a template, missing this an important stageAlthough it has great value And it is impossible to neglect them. Creating a sketch allows you to achieve ideal product parameters. Cardboard trims connected by glue may well be used as a template. If the sink is embedded in the worktop, this moment must be taken into account before the fill. This will avoid exhausting material.

Make a beautiful working surface for the kitchen with your own hands not easy, but it is possible to do if you observe step-by-step instructionsBy studying all the nuances of the process. The described technology can be used for the manufacture of a kitchen headset.