According to many designers, the bathroom is a difficult object, especially if it is in a small apartment. The complexity lies in the high humidity of this room and, accordingly, the selection suitable materials. Numerous questions arise: "What a ceiling is better to do in the bathroom? What should be the floor? How to handle walls? " In this article we will try to deal with the first question, as well as introduce you to finishing materials for ceilings in the bathroom. Perhaps it will help you decide on the choice.

Ceiling in the bathroom - basic requirements

From now existing ways The ceiling finishes are far from each suitable for the bathroom. The fact is that in this premises to the coating are elevated requirements:

• moisture resistance;
• resistance to high temperatures;
• aesthetics;
• protection against mold, fungus, condensate;
• corrosion protection;
• reasonable price.

As you can see, the requirements are not so little. How to make a ceiling in the bathroom so that it meets all these characteristics? Is there such a universal material that meets absolutely all the requirements?

Whitewash

Let's start our review from the most affordable method, which used our grandmothers yet. And they were extremely satisfied (perhaps because they did not know the other). Unfortunately, it is difficult to name durable. The repair of the ceiling must be done every year, it should not be forgotten that with each new whiteling will increase the chalk layer, which will need to be regularly counted. The whots are more suitable for dry rooms, humidity is contraindicated.

Painting

Another economical option. However, it is not as simple as it may seem. It requires certain skills in decoration and skill. The problem is that it is possible to paint the ceiling only under the condition of an ideally smooth surface. therefore preparatory work (Cleaning the surface, correction of defects, putty, primer) must be made professionally.

It is necessary to know that high-quality acrylic water-based acrylic paint is suitable for the bathroom. Only in this case the coating will serve you for a long time. Such paints are not afraid of humidity, quickly dry, often contain substances that are securely protected from fungus and mold. For example, the moisture-resistant WORKER SUPERWEISS paint, which allows you to handle even severely contaminated surfaces. Its price is 819 rubles for five kilograms. Paint consumption - 150 ml / m 2.

Plastic ceiling in the bathroom

This is a fairly common way that allows you to make a beautiful and high quality ceiling in the bathroom. Plastic panels are produced today in a large assortment, it is not very expensive, they differ huge color palette.

If you think about what the ceiling is better to do in the bathroom, then this is a worthy option. The panels are well clean, they are not afraid of moisture, the installation is made easy and simple. In such a ceiling, you can insert lamps. In addition, he looks quite attractive. The last hit - mirror panels.

On average, the cost of plastic panels from 180 to 200 rubles per m 2, their installation will cost 300 rubles / m 2.

Dropped ceilings

If you dream that your bathroom is not only practical, but also in the original, we advise you to pay attention to more modern, but also more expensive types of design. These include the suspended ceiling in the bathroom - tiled, rail, glass, metallic, mirror, etc. It should be borne in mind that such designs reduce the height of the room, so in the rooms with low ceilings They should not be installed.

Use mineral plates

The original solution can be the suspended ceiling in the bathroom, made of mineral plates. Their main component is clay that moves moisture well. However, it is necessary to choose the waterproof plates. Such material is able to withstand humidity up to 100%. Even if you will seriously "flood" neighbors, he will not suffer.

If you are closer to futuristic styles, then mineral plates Can be replaced with metal. Their main advantage is high strength, it is not so easy to damage them. The disadvantages include unsubstantiated color gamut, as well as the formation of condensate on their surface.

You can use plasterboard plates. Today, many manufacturers offer a special moisture-proof material for bathrooms. Such sheets are easily installed, accurately adjusted in size, without joints and seams.

Ceiling Ceiling in the bathroom

Today, this type of ceilings is especially popular. Usually they are made of steel or aluminum. Their color gamut exceeds 50 shades. They are durable, durable, environmentally friendly. Reiki do not rust, do not absorb moisture. The cutting ceiling in the bathroom can have junctions with intermediate inserts. It may be any form, while "eats" only three centimeters of height.

Stretch ceiling

This is the only form of finishing, with which it is actually possible to achieve an absolutely smooth surface throughout the area. It is made of vinyl special material. The tension ceiling in the bathroom is not so as low, but the cost will be fully justified. Such a design will give the room a modern and stylish look. In addition, the mold does not appear on this ceiling, microorganisms do not multiply. The stretch ceiling in the bathroom is good and the fact that it is not going to condensate. The ceiling canvas withstands high temperatures (up to +50 degrees) and is not deformed.

Stretch ceilings have another unique feature - they are withstanding to one hundred liters of water. Therefore, you will not be terrible sweatshops from the upper floors. In this case, it will be necessary to call the installers that the ceiling was installed. They sail the water and dried the coating. It is important that this is a free procedure.

A variety of stretch ceilings

Wealth textures and diverse color schemes are distinguished by this species ceiling coatings. If your bathroom is too small, it can be visually expanded with glossy ceilings. Satin and matte canvases at first glance resemble a seamy surface. What ceiling in the bathroom is preferable? It depends only on your taste and overall interior of the room. By the way, quite often glossy and matte canvases are combined.

Mirror ceilings

When you are interested in which the ceiling is better to do in the bathroom, consider and this very spectacular and stylish option. With such a ceiling, even the most common small bathroom will become much more attractive, it will simply be transformed. Mirrored panels make it possible to create sophisticated, even exclusive compositions. The color range of this material is diverse - bronze, malachite, steel, pink and other colors. Perhaps their combination.

In any room, and in the bathroom including the mirrors visually expand the space. Therefore, it is safe to say that this is the perfect option for a small bathroom. Mirror plates are aesthetic, resistant to moisture, easy to install. Such a surface provides light revelation. It is easy to care for such a ceiling. It will only require a soft napkin and a special means for mirrors or glasses.

Glass ceiling

Arguing on the topic which ceiling to do in the bathroom, it would not be fair to go around the original ceiling of glass. This is a practical and very beautiful solution with a number of benefits. As you know, the glass is completely not afraid of moisture and high temperatures. With a soft cloth, it is easily cleaned from condensate. On such a surface, the bacteria do not multiply, the mold does not appear, it is completely safe for humans. If necessary, damaged plates are easily replaced with new ones.

Glass, like a mirror, thanks to its optical properties, significantly expands the space. And if adding a properly thought-out system of lighting, then as a result, it is possible to obtain an atmosphere of lightness and airiness in the room.

With the help of matte and transparent glass, professional masters create real works of art. Often, photo printing or stained glass is applied on the glass. Having attached a little fantasy, you can even make a very modest room to make a surprisingly beautiful.

Ceilings in the bathroom - reviews

Based on the fact that people think of the idea of \u200b\u200bcreating the interior of the bathroom for quite a long time, they are usually satisfied with the result. It makes no sense to say that the mirror and glass ceilings lead people to indescribable delight. Many people say that they were waiting for their bathroom "Iproach", but such an effect could not even imagine.

Satisfied with your new acquisition and those people who have made in the bathroom ceiling of plasterboard. They believe that it is fully consistent with the funds spent, does not cause any trouble in maintenance.

Positive responses also deserved rush ceilings. Bathroom owners believe that such a ceiling made a room more stylish.

Most consumers prefer ceilings from plastic panels. In their opinion, they are most suitable for such a room. Attracts the affordable price and simplicity in care. In addition, it is important that such a ceiling can be made with your own hands.

Stretch ceilings get different reviews. The majority of customers are very pleased with the appearance of such structures, but they note their high price and the impossibility of self-installation.

In conclusion I would like to say that we have no answer to the question of interest to you, which ceiling is better to do in the bathroom. Answer it will have to you. We only presented to you possible options. And now your turn comes - fantasize, if possible, do not save, because it is your home and your bathroom in which you spend a lot of time.

Today it will be about two designs of ceilings - indisputable leaders in the arrangement of bathrooms. Rack or stretching: whether they are really equivalent in practicality and decorative meaningOr there are differences, without taking into account the quality repair of the bathroom, do not do - read in today's review.

Description of structures

The device of the stretch ceiling by many familiar in view of its simplicity. It consists of two parts: a bagent profile, fixed to the walls around the perimeter of the room, and a canvas or film stretched inside. The main feature of the tensioning system is enclosed in its factory manufacture, on the place is carried out by the minimum of installation work.

The design of the cutting ceiling is more complex and at the same time interesting. The system of fasteners looks very familiar, something similar is used when assembling the frame under the plastic clapboard. The guide P-shaped profile, however, carries an additional decorative function, framing the ceiling around the perimeter and providing a dense beautiful adjacent ceiling to the walls. And instead of the usual rack profiles, special stringers are used, on which epaulets (rakes) are fixed by snatching in slots.

Aesthetics and decorative meaning

Differences in the device caused the difference in appearance. This is perhaps the most important component of any ceiling system: if we are still ready to put up with the cost or complexity of installation, then the exemplary in design and appearance immediately move the type of ceiling at the end of the list.

Fortunately, both of the type of decoration we are boldly attributed to the highly eesthetical, they simply different and should be combined with the overall style concept of the interior of the bathroom. Stretch ceilings are good because they allow you to withstand the spirit of minimalism, so popular in our day. This is especially true for small bathrooms, where the ceiling with any pronounced pattern will attract too much attention.

Glossy vinyl canvases have a very interesting visual effect: reflecting in the mirror coating, the walls get their own logical continuation, so the angular adjoint is taken to perform in the middle of the top row of the tile. Excellent alternative Mirror ceilings, besides there is always the possibility of qualitatively pick up the colors from the wide palette for a complete combination or diversify the mirror smooth pattern.

Matte fabric ceilings - Untreated classic, such a finish remains completely inconspicuous and allows you to focus on more interesting and unique things - a qualitatively laid cafe, plumbing and decorative installations.

Rush ceilings with respect to appearance are the complete opposite of the tension. The longitudinal stripes, at first glance, are not very harmonized with the "checkered" type of tile, although it is more dependent on the tile format. However, with more detailed review, this type of ceiling fit into the "sterile" interiors and becomes a stylish accessory that looks truly rich.

The color scheme is also diverse, and the strict direction of the bands helps to visually fix the rooms with not very cluster geometry, for example, strongly elongated. Rush ceilings, in contrast to tension, are characterized by a more free choice of form. On their basis, you can do both multi-tiered structures with radius edges and wavy planes, for which special types of panels and mounting profiles are intended.

Appearance or practicality

Second after appearance the most important aspect - How to behave the ceiling in conditions of high humidity and how easy it is in caring. The most cavertin in this respect is the vinyl gloss: the drops of the resulting condensate constantly spoil the mirrorhood, especially if the ceiling is tangible. In this case, do not do without special Tools Cleaning: a solution for stretch ceiling in and brushes, without them, laundering a bending canvas can be the more task.

Fabric coatings in care and cleaning are surprisingly simple. The antistatic canvas dust does not collect and does not oversleep due to high vapor permeability. All small pollution, such as salt divorces from splashing, "hide" against the background of light visual noise formed by microtexture. The fabric of the canvas is impregnated with polymers that prevent the rotting and formation of mold.

Rush ceilings behave in many ways similar to glossy. Metallized polished inserts are somewhat losing in the attractiveness of the form if traces from dried droplets appear on them. However, we will be fair: this is far from the same thing that in the case of a mirror stroy, and the surface moves somewhat less due to the presence of gas exchange with the area under the draft ceiling. By the way, in view of the vapor permeability, the exhaust channel can be placed hidden, the same applies to the tissue stretch ceilings.

From the point of view of the assembly process

For the end consumer, tension film ceilings will be the most trouble-free. Experts will independently measure, make a canvas and carry out installation in a couple of hours. All these works do not fulfill, for you need heat gun. You can save by setting the castle profiles yourself, but how much will such savings, taking into account the small area of \u200b\u200bthe bathroom?

Fissure ceilings can be mounted completely independently, ranging from attachment of the bagent profile and ending with the tension of the canvas itself. All that will be required of the special tool is a grill-shaped spatula, which the fabric is refilled in the groove, and a pair of pure gloves.

The rush ceilings in the montage are most complex, but at the same time the process of their assembly - the occupation is quite fascinating. It all starts with fixing the starting guide profile along the perimeter of the room in the overall horizontal plane. Marking is easiest to make a laser level, but the usual water will be used for the absence of such. Before fixing in the central shelf, the profile you need to make a perforation in a step of 40-50 cm, while drilling better with outsideSo that the remaining graphs do not interfere with the dense fit to the wall.

After fixing the guide profiles, carrying stringers are mounted and the planks are gaining, then interrepanic decorative profiles are inserted between them. The main difficulties are reduced to the trimming of the extreme bands and to do the grooves to install point lamps. However, the material of the panels is sufficiently malleable and only a segment knife and scissors for metal will need to work with it.

Care and maintainability

Although the bathroom can not be called a room where household activity boils, damage to the ceiling may even take place here. The most expensive in terms of repair can be without a doubt call the film stretch ceiling. In the event of damage to the film with a small blood, it will not be possible to do: they will have to change everything can be changed, which is quite expensive.

However, the tissue canvas also changes entirely, only the cost of it is much lower. In addition, there is a problem to pull the remnants of the fabric from the locking profile lock, but it is quite possible to do with the pulled web.

Unlike the lining, the cam ceiling will not have to be disassembled completely in case of damage to one or more panels. Rake is simply drilled in several places and breaks down, instead of it insert a new one and return interpanel profiles to the place.

In the care of both the type of ceiling finish considered by us, it is very unpretentious: do not absorb contaminants, do not form a nutrient medium for mold and are not susceptible to rot or corrosion. Wash them should either clean waterOr the compositions that do not form a soap film to which dust sticks. Naturally, any painting and other "new clothes" speeches does not go: materials retain the appearance for several decades.

Planning repairs in the bathroom, certainly have to deal with the selection of materials for the finishing of all surfaces of this room. Of course, I want them to be not only reliable and had the longest life of the service life, but also fully answered the aesthetic demands of housing owners.

Ceiling in the bathroom What to choose is one of the questions you want to find the right answer. It is important to find the material not only beautiful and hygienic, but not having contraindications for installation indoors with high humidity.

In a modern assortment of building stores, you can find any material in demand for finishing work, but it is necessary that it fit well for a particular bathroom, corresponded to its area, ceiling height, general style design.

Before proceeding with the consideration of the types of ceiling, which may be suitable for this room, you need to deal with what requirements they must respond.

If the materials for the repair of other rooms, you can choose almost any materials, then because of the high humidity in the bathroom, you must first consider this particular factor. So, the materials for finishing the ceiling in the bathroom must meet the following requirements:

• The water resistance of the material is required for this room, since the humidity and saturation of pairs are its natural state. In addition, it is not necessary to miss the type and the fact that most often the neighbors are top with the top of the bathrooms, since no one is immune from the leakage of the crane or washing machine.

The leaks in the bathroom are very likely, and the ceiling must be "ready for this"

• Easy to care. Increased humidity contributes to condensate ceiling, and if not periodic surface treatment washing agentsWith time, mold may appear there. Therefore, the ceiling of the bathroom should be easily cleansed with a soft tissue and a wet sponge and not afraid of household chemicals.

• Bath - a room in which all family members take water procedures. That is, a priori, all materials for its finishes should be environmentally friendly, absolutely safe, hygienic.

One of their key requirements - aesthetic appearance, harmonizing with the general design of the bathroom

• Aesthetic surface view. If the bathroom is planned to make repairs using expensive materials, the ceiling must match general interior. Therefore, the design should be thought out very carefully.

• The next criterion include lighting, as it is closely related to the ceiling plane. As a rule, there are no windows in the bathrooms, so all hope is only on artificial light sources. If the ceiling is dark, then more electrical appliances and electricity costs will be required to create a comfortable illumination of the room. Of these considerations, it is recommended to choose a ceiling of light shades - then it will enhance the brightness of the lamps.

Main types of ceilings and their characteristics

When the selection criteria are understandable, you can move to information about which types of ceiling can be installed in the bathroom, and which of them are better suited for this room.

So, the following options apply in the bathroom to varying degrees:

• Alignment of the surface with putty with the subsequent color or finishing with ceramic tiles.
• Creating a suspended ceiling:

- from aluminum rails - Rreads;

- from PVC panels;

- from moisture-proof drywall;

- from plates made from various materials.

• Installation of stretch ceiling.

Now it's time to consider that each of the ceiling is, what positive and negative qualities has and how suitable for the conditions of the bathroom.

Painted ceiling

This type of ceiling can be called traditional and most affordable in price of all existing, especially if there are skills to align surfaces with plaster and putty. If there are no such, you can always invite the wizard to perform this work. Standard bathrooms have a small area, so work will no longer be too expensive.

One of the most "budget" options - the ceiling coloring

Provided that the surface of the ceiling is quite smooth, then you can do without plastering, bringing it to a smooth state of putty, which can close small irregularities.

Putty on your own - it is possible!

If you master the basic techniques of plastering technologies, then you can solve a bunch of problems when repairing its forces. Read how a separate article of our portal is dedicated to this.

To make a job qualitatively, it needs to be carried out according to all the rules, using primer with antiseptic properties and competent selection of waterproof paint, which can not be subjected to wet cleaning.

For the ceiling, the bathroom uses waterproof paints on latex, acrylic, silicate and silicone basis, which meet all the requirements of this room.

Special moisture resistant latex paint - Painted surfaces succumb to wet cleaning

TO positive sides This method of finishing can be attributed the following points:

• Affordable price for materials.
• The ability to spend your work yourself.
• Aligning the surface of the ceiling once, change the color as well, if you wish, apply the drawing, it will be repeatedly.
• Easy in cleaning the painted plane.
• With high-quality work and properly selected materials, as well as with regular surface caring, the painted ceiling can serve without updating to ten years, unless emergency situations happen in the form of a flood.
• The painted ceiling will suit any interior design of the walls and floor of the room. If desired, it is possible to apply the paint of the desired shade, which is harmonizing with the finishing material of the walls.
• The ceiling with such a finish does not at all become lower, in contrast to other methods of design.

There is a painted ceiling and their limitationsMany of which are fully corrected:

• The painted ceiling is not at all delayed water when flooding from above.
• Over time, stains appear on its surface, or the paint can also sweep much, and the white color becomes yellow. However, it is easy to solve this problem, refreshing the ceiling on top of a layer of paint selected color.
• The painted ceiling can be exclusive only when applied to it of an original drawing or color gradient - without it it will look "just carefully".
• In such a ceiling, it will not be possible to build point lighting lights. But today on sale you can find no less original lampswhich are attached directly to the ceiling or hang on special brackets.
• If the ceiling processing technology is not observed, mold spots will appear on the painted surface.

With improper processing of surfaces along with dampness, its inevitable satellites appear - mold spots

So, the painted ceiling can be called optimal option In the event that there is a need to save or simply at the time of repair, it is not possible to purchase a more modern finish option. But, if the surface is maintained in order and update from time to time, it can be operated long enough.

Ceiling from PVC panels

PVC panels are a relatively new finishing material, and it is most often used precisely for the design of bathrooms or bathrooms. Installation of panels can be done in two ways - fasten them directly to the ceiling with glue, or on the frame installed on the ceiling. It can be made from a wooden bar treated with antiseptic impregnation or metal galvanized profile. The lamp is mounted to the ceiling or falls from it to the desired distance using suspensions.

Most often panels are mounted on the grille, since for their gluing the surface of the ceiling must be aligned, which requires a certain time.

If the ceiling in the bathroom is low enough, the lamination can be used with a thickness of only 15 ÷ 20 mm. Then the overall level drops only at 25 ÷ 30 mm, since for the ceiling sheathing is quite the thickness of the plastic lining in 10 mm.

Plastic panels have a lot dignityWhat causes their wide popularity to finish bathrooms:

• The installed panels form a moisture-resistant coating, as each of the panels has a "groove-spike" castle. In addition, especially for accurate installation of the material are made of fittings, which hide the joints of the panels with walls.

• Installation of this finishing material It is quite available to produce yourself, even without building skills. It is enough to understand the principle of installing panels and have the necessary simplest tools at hand. In addition, the panels are low, so work can be carried out even without helper.
• PVC panels differ from other materials with a variety of shades and drawings that can imitate ceramic tiles, wood texture, metal surface etc. Therefore, the finish can be chosen for every taste and color, easy to choose to the general bathroom interior.

• Operation of plastic lining coating without loss of decorative qualities can continue for up to 10 years, depending on the quality of the material. Therefore, you should not choose the cheapest options, as they can be covered with stains, fond or change the shade.
• Installation of panels on the crate can align the curve surface of the ceiling.
• Plastic lining is easy to put in order, just rubbed dry or damp cloth.
• The panels have an affordable price, so they can afford to acquire even a family with an average income.
• Despite the low cost, the decoration looks at the ceiling quite respectable.

• Point lamps can be embedded in the ceiling surface.

As with any finishing material, PVC panels have several disadvantages. And, although they are insignificant and fully correct, they should still be borne in mind:

• If the panel design is planned to trim spotlights, it will have to be omitted from the capital ceiling, at least 80 ÷ 100 mm. - The distance will depend on the height of the lighting devices selected to install. And this, in turn, means that the ceiling will be much lower than the project was assumed.

• In the absence of periodic cleaning, dirty stripes can form on the seams between the panels and the mold fungus appears. Therefore, for the cleanliness of the design you need to monitor constantly.
• If the panel ceiling is installed poorly, and at least a small gap is formed on the joints with the wall or between the elements, a favorable environment will be created between the suspended and capital plane, which will not be visible from the bathroom. You can bring similar foci of microflora, just dismantling the panel and putting a lot of effort. Therefore, it is recommended that all the gaps that have encouraged the sealant.
• The panel ceiling will not be able to delay the flow of water from above when leakage occurs, so it will have to dismantle it in this case to dry the capital surface. Perhaps you have to do repair throughout the room.

From the above, we can conclude: a plastic clapped ceiling - a good, affordable option, which can make the ceiling with a neat and aesthetic. It, with appropriate care, will serve quite a long time if there is no emergency situations during its operation.

Warm pendant ceiling

The Ceiling version has the same design as panel, but it consists of narrow rails made of aluminum, plastic or thin steel. The metal used for the manufacture of plates has a special processing and does not give rust. Mounted the details of this ceiling on the crate in the same way as plastic liningBut the ceiling decorated by them has a more respectable look. Reiki are produced in a variety of color schemes and can be decorated with drawings or have a metallized coating - gilding or chromium.

Advantages This material can be considered the following:

• Installation of the cutting ceiling can be carried out independently, not attracting a wizard to the process. And this means saving funds, which is comparable to the amount paid for the material itself.
• Reiki have quite high flexibility, which allows you to collect curvilinear original designs from them.

• The qualitatively installed elements of the ceiling in a single plane make it waterproof and non-missing pair from the room to the capital ceiling.
• It is easy to care for such a ceiling - it is enough to regularly wipe it with a damp soft cloth and periodically handle detergent antiseptic means, In order to avoid the occurrence of mold.
• It is possible to operate such a design, with proper care can from 10 to 12 years.
• The material has a higher price compared to PVC lining, but quite affordable and its corresponding quality. The cost may vary depending on the material manufacturing material.

There is such a ceiling and limitationswhich are essentially identical to the negative qualities of plastic structures.

The only thing that should be noted is the cutting ceiling is not suitable for each interior design of the bathroom, the poet before purchasing it, it is recommended to make a sketch of the design of the room in color.

Foam plates

The most simple and affordable and installation of the material can be called subtle embossed plates from the foam. Their installation is made on any relatively smooth surface with one of the polymer adhesives. The ceiling decorated with such plates looks quite carefully and is not inferior to the aestheticity of painted options.

One of the easiest and inexpensive options - foam tiles glued to the surface of the ceiling

TO positive properties This material placed on the ceiling of the bathroom can be attributed:

• A rather high moisture resistance of the material.
• Aesthetic and accurate appearance of the surface.
• The ease of panels and, accordingly, simplicity of installation make it possible to carry out the ceiling independently, even in the absence of experience in a similar form of work.

• The capital ceiling decorated with foam tiles will practically do not lose in height, since the tile is glued directly to it and has a thickness of only 3 ÷ 5 mm.
• The service life of such a ceiling is small - only 4 ÷ 5 years, this period is quite consistent with the low price of the material.
• If the tile has a smooth surface, then dust and dirt are easily removed from it.

Negative parties This design is considered the following factors:

• So that the tile served more long term Without the appearance under it and in the seams of mold, it is recommended before its sticking, to process the surface with antiseptic impregnations deep penetrationWhat will lead to additional costs.
• In the foam ceiling cannot be embedded point lights.
• This material will not detain water when leakage from the top floor, and in such a situation the finish will have to be completely replaced.
• Since the ceiling in the bathroom requires frequent cleaning and processing, it is not recommended to choose a plate with a deep embossed pattern for this room, because it will be quite difficult to clean from a dirty plaque.

This method of finishing can be called an economy option, applicable if there is no possibility to purchase and install more expensive material. Such a tile, nevertheless, more suitable for rooms with normal humidity.

Plasterboard ceiling

The ceiling can be decorated with drywall in two ways - sticking it to the capital basis and additional fixation To it using dowels - "fungi", or fixing the material on a wooden or metal frame. But both in the first and in the second case, plasterboard will require additional decorative coating.

To cover the ceiling in the bathroom uses moisture-resistant drywall sheets, which has a higher price than the usual material, as it has the necessary qualities for installation indoors with high humidity. Such a type has a green surface and marking of G Clac.

Benefits Plasterboard ceiling:

• The material of G CLEV has a high resistance to moisture and the formation of mold.
• Multi-level exclusive designs can be made of drywall.
• It is suitable for installing point lamps and hiding various communications - electrical cables and ventilation boxes.
• Plasterboard is an excellent material for leveling ceiling planes, so it is often referred to as "dry plaster".
• Sheets can be used as the basis for any decorative coatingsSo it creates a smooth and robust surface.
• The service life of such a design is unlimited, if emergency situations occur, and subject to regularly updating the finishing layer.

Disadvantages The following points are considered a plasterboard design:

• For the manufacture of such a finish, you will have to invite a qualified wizard, as the installation process is quite complicated, especially if it is planned to install a multi-level ceiling option. In addition, it is not easy to hold and finish finished surfaceSince it requires processing with primer solutions and high-quality coverage with spacure compositions.
• If you consider all the materials you need for such a ceiling, the process will be sufficiently costly.
• Installation of the entire design, from the beginning to completing the work, will take quite a lot of time, especially in cases where the installation is made independently, and experience in this process has not yet been developed.
• The ceiling made of drywall will not be able to delay the water in the event of serious leaks on the upper floors, and in such a situation, the sheets of the material will have to be replaced.
• The ease of cleaning the plasterboard ceiling will depend on the quality and properties of its external finish.

So, a neat ceilings are obtained from plasterboard different designswhich can solve some everyday problems - leveling surfaces, hiding communications and even insulation or sound insulation of the ceiling. But, it is better to mount them in the rooms where the minimum risk of flooding is created, otherwise the means, forces and time can be spent in vain.

Tiled Mesh Suspended Ceiling

In construction stores you can find ready-made systems from special metal profileswhich are collected and suspended with a capital basis using suspensions. Plates stacked in the created cells of such systems are made from different materials - They are dry-fiber, glass, mirror, drywall, plastic and others.

Such a ceiling has its advantages and cons who need to know, deciding to mount a similar suspension design.

To their advantages You can attribute the following:

• Installation of such a suspended ceiling can be aligned with a capital surface having irregularities of any degree, since the hooks on which it hangs, allow you to adjust the height of all design departments perfectly in the vertical plane.
• The ceiling allows you to hide various communication elements behind its surface.
• The design can be used for mounting between it and the capital surface of insulating or sound insulation materials.
• Point lamps can be embedded in the stove, embedded lighting or upper backlights - when choosing matte plates from plexiglas.
• The elements of the ceiling have a variety of design, so they can be selected to any interior of the room.
• Panels are not fixed on the surface of the frame and are removable, so if you wish, all or some of them can be removed and, for example, repainted in another color. In addition, when leaks on top of the panel can be temporarily dismantled to dry the ceiling, and if necessary, replace them with new, using the same metal frame.
• The suspension design gives the ceiling aesthetic and neat look.

• The service life is about 10 ÷ 12 years.
• Installation of the slab ceiling is easy, so it is quite accessible to spend independently.
• The complexity of cleaning the surface directly depends on the material of the manufacture of plates.

Of disadvantages slave frame ceiling To mount it in the bathroom, we note:

• Such a suspended ceiling will not protect the rest of the rest in the bathroom from the flow of water during leaks - it executes exclusively decorative functions.
• The mold will surely appear in the space between the plates and the main plane of the ceiling, if you do not install additional ventilation in this space.

These are the main disadvantages, knowing about which one can decide whether it is possible to establish such a ceiling in a particular room.

Conclusion: such a ceiling can be installed in the bathroom, but not suitable for it perfect. Therefore, choosing it, you need to consider the above moments.

Mirror ceiling

Separately, it is necessary to highlight the mirror ceiling, although it is also mounted on the principle of suspended design. Deciding to establish this option in your bathroom, you need to be ready for high costs.

A reinforced metal frame is fixed under the mirror panels, and the elements themselves are fixed on it with glue or special fasteners for which the holes are drilled.

It should be noted that there are more available options Mirror ceilings are plastic panels, with imitation of a mirror coating, they are much easier than real plates and mounted and much easier. Such panels are stacked on a light metal frame described above, but the service life of this option is lower than that of the real mirror ceiling.

Positive traits Mirror design:

Durability with proper installation and care.

• The ability to save on electricity, as mirrors will double the coverage of lighting.
• Exclusive, "rich" appearance design.
• Moisture resistance plane due to the fact that the panels are fixed on the frame crate.

"Minuses"mirror ceilings:

• Inability to delay water during leakage.
• Complex surface treatment. For the ceiling to have an impeccable look, it must be polished and rub to perfect purity, as it will be visible even minor pollution.
• Installation of this design is recommended to trust the master having the appropriate experience.

Before installing such a ceiling, you need to consider how it will affect the psyche of each of the households, since not everyone can withstand such an abundance of mirrors and gloss from them.

Stretch ceiling

Stretch ceiling, probably, you can call the most ideal option for the bathroom, as it has more positive qualitiesrather than negative. Most significant practical advantage The stretch ceiling is its double-sided moisture resistance. It is made of polymer elastic materials capable of progressing with warm air to shrink, pulling into a smooth canvas.

Stretch ceiling - and beautiful, and practical

TO benefits Tension ceilings for the bathroom in front of other decorative finishes can be safely attributed:

• Waterproof material. When an emergency in the form of leaks from the upper floors of the stretch ceiling is able to easily collect water on its inner surface. Thus, wall and floor decoration will not be corrupted, as well as bathroom accessories. The polymer material can withstand the weight of 100 kg per square meter.

If a similar situation arises, then you just need to contact the firm that has made the installation of the ceiling and call the masters. It will salt the accumulated water and again pulls out the stretched material that has not lost its initial qualities from such "stress".

• Care for the stretch ceiling is very simple - it can be simply wiped with a wet cloth, removing the contamination appeared on the surface.
• With the help of the stretch ceiling, you can hide all the overhaul of the capital base, without resorting to the alignment of its plaster.
• The material can be stretched at a distance of just 50 mm from inter-storey overlap, so it does not "steal" the useful space of the room
• The design of the stretch ceiling can be chosen for every taste, under any interior bathroom or - the design offers are affecting the variety.
• By itself, the stretch ceiling is also a fairly effective barrier from the spread of noise.

Soundproofing problems helps to solve the stretch ceiling!

Not only that the canvas itself devoid sound waves. The space between it and the overlap allows you to additionally arrange. How and how can this be done - in a separate publication of our portal.

If it is decided to choose a stretch ceiling for the bathroom, then you need to know about it disadvantages:

• The stretch ceiling cannot be installed independently, since for this process, special equipment and auxiliary materials are needed, as well as high skills in such technology.
• The ceiling of merettes to mechanical effects, and its surface is easy to damage with solid or acute objects. If such a casus occurs, the ceiling will lose its unique qualities to delay the water.
• Stretch ceiling white color Maybe over time, get used in the areas around the installed lamps. It will not work for laundering or paint this flaw, so the canvas will have to be changed completely.

Summarize!

Let's summarize the selection of the type of ceiling for the bathroom in two main criteria: practical qualities and aesthetic design.

• The first place of reliability and preservation of the placement from flooding occupy stretch ceilings.

- second place you can safely give the plastic panels and suspended ceilings:

- In the third place, painted ceiling options are claiming, as they are easily restored - the color and drawing on them can be replaced without much difficulty. When floting, the painted plane is always easier to dry than those that are closed by non-removable panels.

• From aesthetic point of view, three types of ceilings deserve first place - it is stretched, robes, and ceilings from PVC panels.

- Second place can be given to the slab, which is also different with a variety of design, but, unfortunately, not suitable for all bathrooms.

- the third place in aesthetic occupies plasterboard ceilingSince it is possible to create exclusive complex structures. But from a practical point of view, it is more suitable for dry premises.

Of course, the aesthetics of this or that version of the ceiling must determine for itself the owner of the housing, but it must be remembered that the practical side of the finishing is always the first to be the first thing.

And, in the conclusion of publication, the reader's attention is offered a video with tips on choosing a ceiling for the bathroom.

Video: What ceiling is suitable for the bathroom?

Stretch or rack ceiling in the bathroom, what is better? Features, advantages and disadvantages of film stretch coatings In bathroom. Characteristics of rush ceilings. Their pros and cons. Comparison of two types of coatings in terms of their practicality and beauty, as well as taking into account customer feedback. Conclusions.

To understand, stretch or rack ceiling in the bathroom is better to do, it is necessary to understand the features of the design of each and carry out a comparative analysis.

Features of the stretch ceiling in the bathroom

For the bathroom it is better to use a polyvinyl chloride stretch ceiling. It has all the necessary qualities for mounting in this room. The main advantage of the coating is its high moisture resistance. At the same time, the ceiling not only does not rejoice himself, but also able to protect your home, restraining the large volumes of water, fed from the top from the neighbors.

After installing the ceiling, the height of the room will decrease only by 3-5 cm. For installation, it will be necessary to invite specialists, since the installation passes after preheating of the tensioning surface using a heat gun.

Advantages of stretch ceiling in the bathroom:

• High moisture resistance of the coating allows you to exploit it in places with high levels of humidity.
• Speed \u200b\u200band simplicity of installation. For installation, it is not necessary to prepare the base ceiling, carry furniture. Also during the installation a lot of garbage is not formed.
• But the surface of the stretch ceiling is not going to condensate.
• The coating cannot be damaged by fungi and mold.
• Care for the material is very simple: it can be washed using detergents.
• A wide selection of colors and textures ensures that you choose a suitable coating.
• Glossy ceilings of light colors allow you to visually expand the space of the room and make it higher.
• Behind the stretch ceiling you can hide engineering networks, base ceiling defects and protruding structures.
• On this ceiling you can perform photo printing.
• The price of PVC coverage is quite acceptable. So, the cost of white matte ceiling The lowest, and the purchase of texture coverage will be the most expensive.
• The durability of the material is another plus.

Before deciding, stretching or rack ceiling in the bathroom should be done, we will study the flaws of film coatings:

• The lowest strength of the ceiling is its main minus. With careless handling of sharp objects in the bathroom, the coating can be damaged. However, the bathroom is not a billiard room and the risk of puncture the ceiling is minimal.
• Film ceilings do not allow to be ventilated by the patient space. Condensate can be collected from this, and mold and mushrooms are formed. To this not happened before installing the tension film concrete ceiling Can be treated with antiseptic impregnations.
• PVC ceilings are produced in rolls with a width of no more than 2.3 m, which makes it difficult for seamless installation in a large room. But our baths definitely do not belong to the category of overall rooms.
• Installation pVC products should not be held in unheated premisesBut it does not touch the bathroom.

Wild ceilings in the bathroom

To answer the question of which the ceiling is better to do in the bathroom: wheels or tensioning, it is necessary to study the features of the first coatings.

This ceiling is performed from special aluminum panels and the same inserts. The whole design is attached on the suspension to the base ceiling. Special aluminum or galvanized rowers are used as rail guides.

The texture and coloring of the RESEK can be any. They are matte, glossy, perforated, as well as with imitation of skin surfaces, suede, stone, etc. In addition, the panel can be attached to premissive, open and closed way. To install such a ceiling from base surface We will have to retreat 6-10 cm.

The benefits of these ceilings can be attributed:

• High strength of aluminum rails and their durability is the main and indisputable advantage of such ceilings.
• Aluminum does not give in corrosion, so the ceilings can be operated in a wet bathroom environment.
• On the surface of the rush ceiling, various microorganisms will not be able to develop.
• Caling care is very simple. If necessary, you can even wash it.
• High fire resistance. Aluminum rails will not burn.
• When baying from above, the ceiling itself does not suffer. Water simply will go through the slots in it without damaging the coating itself.
• Over the ceiling you can pave any communication.
• Through the coating carries out natural ventilation of the undercaption.
• Simple selection and installation of lighting appliances.
• Acceptable price.

Disadvantages:

• Long time-consuming installation.
• The surface of the ceiling is reduced by 6-10 cm, so such products cannot be mounted in low rooms.
• The material will not protect your home from flooding, like PVC ceiling.
• Due to the specific species, the cutting ceilings are not suitable for all rooms.

Tension or Wheel Ceiling Bathroom: Reviews, Comparative Characteristics

To finally understand which of the two ceilings it is better to use in the bathroom, we will carry out a comparative analysis of their features, taking into account the reviews of owners of such ceilings:

1. Both coatings have good moisture resistance, but PVC ceiling besides this will protect your property from damage due to the bay.
2. Strength and durability is much higher in the cutting ceilings, but their appearance does not guarantee the perfectly smooth and smooth surface, like a film.
3. To care for both coatings is easy and simple.
4. A longer and expensive installation says not in favor of robust structures.
5. If you often form mold on the ceiling, then it is better to use the coatings from the rails providing good ventilation of this space.
6. When installing tensioning coatings there are problems with choosing and installing lamps. They should not be very basked and mounted on special platforms to the base ceiling. There are no such problems such problems.
7. In low bathrooms it is better to use PVC ceilings.

As you can see, stretched ceilings are much more advantages, and their appearance speaks for himself. If you want to order installation of PVC. The ceilings in the bathroom, contact us on the specified phones.

As in any other room, the ceiling in the bathroom can be separated completely differently. There are ways of expensive and spectacular, practical, traditional, original - it all depends on the financial capabilities and taste of homeowners. But when choosing an option, it is necessary to take into account the specifics of the room, otherwise the finish will very soon lose its decorativeness. Consider the same details that the ceiling is better to do in the bathroom so that it is attractive, reliable and harm with cleaning did not deliver.

The bathroom is characterized primarily by high humidity, which affects durability, strength and aesthetic finish. Dampness and heat contribute to the development of mold on the ceiling and walls, corrosion of metal elements, the formation of sublishes and spots on the coating.

That is why the ceiling in the bathroom must meet several important requirements:

• to be resistant to moisture, it is easy to succumb to cleaning and washing;
• do not allocate harmful evaporation;
• have a neat look and match the style of the interior of the bathroom;
• there should be convenient access to hidden design elements.

Finishing materials, in addition to the waterproof, must have resistant to fungi and corrosion, and to be rather durable so that it does not have to repair the ceiling every year.

Ceiling "Starry Sky" with Blue Backlight and Gold Inserts

Bathroom ceilings options

The fiscal methods of finishing include plastering, whitewashes and painting the ceiling surface. To the most expensive - glass panels with photo printing and stained glass windows, mirror ceilings. There are many options in the middle price segment: plastic sheathing, Rack ceilings, curly structures from waterproof drywall. To figure out which one is the most optimal, it is worth studying the pros and cons of each species.

Watching and whitewash

Now in any construction store you can easily find waterproof plaster and putty, and at a very reasonable price. With their help it is easy to eliminate small irregularities, small cracks, other defects, give the ceiling a very neat look. Align the application process is easy, and many homeowners prefer to perform it on their own, which saves on the service of the master.

It is very important to prepare the surface well, clear everything that keeps everything is very, to close the joints between the slabs of overlapping and deep slots. The plaster itself is applied in several layers, each of which thoroughly rubs into and is ground. For whitames, the chalk or hawed lime, divorced in water to the desired consistency, is used.

• materials cheap and environmentally friendly;
• work can be performed on your own;
• if necessary, it is easy to eliminate defects in a separate section;
• lime has antiseptic properties, so mold will not appear on the ceiling.

• too simple form;
• preparation and leveling of the foundation requires a lot of physical effort;
• teaches from wet evaporation over time peeling and yellowing, so it is necessary to update the coating annually;
• if splashes fall on the ceiling, there will be ugly dries after drying.

Coloring

As in the case of blissing, the surface of the ceiling requires the perfect alignment, especially if the paint with glossy glitter. The choice of colors for bathrooms is just huge, almost all of them are environmentally friendly, resistant to moisture and erasure, are distinguished by a wide color palette. Most of the compositions have vaporizolation and anti-grapple properties, which has great importance For such premises as a bathroom. It is absolutely optionally to make a ceiling one-photo: paints can be combined in color, draw ornaments and patterns, use various stencils.

• decorativeness, the ability to show fantasy;
• simplicity of application;
• available cost of materials;
• paint is much more durable to whiten;
• work can be performed independently;
• ceiling can be washed.

• the surface must be perfectly aligned;
• over time, the color burns out, white paint yellowes, spots may appear on the coating;
• in case of flooding from above, the finishes will be hopelessly corrupted.

Moisture-resistant wallpaper

This type of finish is quite rare due to its impracticality. For sticking wallpapers, the ceiling is prepared as thoroughly as in painting, since any irregularities clearly appear under thin coating. Waterproof Wallpapers can be repainted several times to update the bathroom interior.

• the finish will cost relatively inexpensively;
• wallpapers give the ceiling attractive and cozy appearance.

• it is very difficult to glue the wallpaper on the ceiling;
• cutting, fastening and docking the canvas require great accuracy;
• under the wallpaper often develops mold;
• when flooding neighbors from above, the coating will have to be completely changed.

Plastic ceiling

Sheaving plastic panels - Very popular type of decoration for bathrooms. Panels are attached to an aluminum frame mounted on the ceiling. The frame hides all the defects of the ceiling surface, allows you to mount the built-in backlight, hide communications. The panels are characterized by dimensions, thickness, colors and texture, so you can choose the option for almost any interior style.

Profile for mounting panels is fixed by suspension

• the ceiling looks very aesthetically attractive;
• the cost of materials is not too high;
• no need to level the surface;
• installation does not require special skills and die for everyone who knows how to handle the tool;
• the design is durable, if necessary, you can replace individual panels;
• the coating is completely not afraid of moisture, it is not deformed, it is easy to clean detergent.

• the ceiling becomes below a few centimeters;
• dirt can accumulate in the joints, and in the absence of normal ventilation, the fungus develops there.

This option is distinguished by very stylish. modern view. The design is a metal frame, covered with narrow plastic plates, aluminum or thin steel with an anti-corrosion coating. The color range of such coatings is very wide, the rails under gold, chrome, with a pattern, use special demand. Installation can be open and closed: In the first case, the gaps of a certain width are left between the rails, in the second - all elements are attached to jack. The assembly is performed very simply, everyone can mask it.

• spectacular view, great variety of colors;
• simple installation;
• no need to level the base;
• it is possible to mount the built-in backlight;
• material is resistant to moisture, corrosion, temperature drops, fungi;
• ease of care;
• if necessary, it is easy to replace individual elements;
• in the case of flooding from above, there will be no coating;
• the term of operation on average is 30-35 years.

• the cam ceiling will cost a little more expensive than the usual plastic;
• on the seams and joints can accumulate dirt.

Among suspended structures A cassette, or modular ceiling uses high demand. It is a suspended metal frame, in the cells of which the decorative panels are stacked. The bathroom uses aluminum panels, plexiglas, galvanized steel, acrylic, mineral. They differ in color and texture, can be monophonic and with a pattern.

• there is no need to level the surface of the ceiling;
• the frame is perfectly hiding communications, there are opportunities for built-in lighting;
• when damaged a separate panel, it is easy to replace;
• it remains access to communications - just raise one of the modules only;
• panels give the ceiling modern and very attractive view.

• high price;
• the suspended system takes no less than 15 cm space, so it does not fit the bathrooms with low ceilings.

Ceiling tile

The finishing of the polystyrene foam tile is also quite popular. The tile attaches a cozy and aesthetically attractive look, suitable for most interior styles. To glue the tile, the ceiling should be well prepared, align, scope, be sure to cover the primer. Polystyoltilol is resistant to moisture and mold, it can be periodically repainted.

• low cost;
• small weight of the material;
• variety of textures;
• tile is easy to handle in the installation process;
• easy to care.

Cons: It is necessary to carefully prepare the surface;

• cutting and docking tiles require accuracy and accuracy;
• the material is easy to break, so when sticking it is impossible to put pressure on the tile;
• dirt can accumulate in the joints;
• when flooding from above, the coating can be compressed and it will have to be changed.

Plasterboard

Plasterboard structures are quite common in the bathrooms of a large area. They are metal frames, most often multi-level, figured form, with integrated light, covered with moisture-resistant plasterboard. From above, the skin is sweeping and stained with waterproof paint. Such multi-level ceilings look very original and stylish; The material is easy to handle, installation does not require special skills.

• the framework perfectly hides all defects, wiring, pipes, there is no need for careful preparation of the base;
• the covering perfectly tolerates the effects of steam and temperature differences, amenable to washing, opposes the development of fungi;
• the ceiling looks attractive and solid.

• no access to communications;
• the frame takes a few centimeters of space;
• the ceiling arrangement costs quite expensive;
• in the case of repair, replace a separate area problematic;
• periodically, the ceiling must be painted to refresh the appearance.

Stretch ceiling

Tension popularity PVC ceilkov Every year only grows. They are combined with any design style, differ in a large variety of colors and textures. Especially spectacularly look at the ceilings with photo printing and 3D image.

• high decorativeness;
• resistance to moisture, temperature differences, condensate does not accumulate on the ceiling;
• when flooding, the coating holds a large volume of water, after the drain of which again becomes the previous form.

• installation requires special equipment and professional skills, so make the stretch ceiling will not work independently;
• such finishes are quite expensive, compared with the rubber and cassette ceilings;
• film easily damage the sharp object;
• no access to communications;
• in case of damage, the coating must be fully changed, it is not subject to repair.

Glass ceiling

This finish is the pleasure of expensive, but extremely spectacular. Plates of tempered glass can be matte, mirror, color, with drawings and stained glass windows, with built-in backlight. Installation is made by type cassette ceilkovBut the frame is used enhanced, since the weight of the glass is large enough. Of course, the base should also be particularly durable, otherwise the entire design may collapse down.

• the ceiling looks unusually spectacular and original, visually expands the room;
• the glass is not afraid of either moisture, nor fungus, it can be washed with any detergent;
• with careful care, the coating will serve not one dozen years.

• high cost of materials and installation;
• the installation requires accurate calculations of the load on the basis and significant labor costs, so the specialist should do it;
• not suitable for premises with weak floors;
• on the glass surface there are easily divorces, so you need to care for it more carefully.

Which ceiling to choose

Each of the described options is attractive in its own way, but if we take into account the optimal value ratio, decorativeness and ease of installation, then the best option It is plastic or a cam ceiling. Thanks wide selection panels, you can find interesting and unusual combination In color and texture, or, on the contrary, choose a discreet classic option. If the bathroom decorated in the style of high-tech or loft, the panels with a mirror coating are ideal, as well as chrome and with a metallic colors. This is a great opportunity to show fantasy, feel a little designer.

Installation of the rush ceiling in the bathroom

The installation of the cutting ceiling is the final stage of the bathroom finish. Pre-black ceiling must be cleaned of dust, peeling plaster, paint, all existing cracks must be embroidered and embedded with putty. The places affected by fungus are necessarily cleaned and treated with antiseptic means. At the end, the surface is covered with waterproof soil with antifungal additives to eliminate the appearance of mold in the future.

Council. Before installation, you should perform a wiring for lighting and fasten the wires on the ceiling with a dowel-nail and plastic clamps.

During the work, you will need:

• decorative plastic or aluminum rails;
• aluminum profiles;
• stringers (tire bearing);
• suspensions;
• self-tapping screws and dowels;
• scissors for metal;
• level; Drill with a set of drills.

Step 1. On the perimeter of the room on the walls, a smooth horizontal line is carried out at a distance of 15 cm from a rough base. For marking, it is very convenient to use a laser level, but the usual construction will come down.

Step 2. On the markup line, it is planned every 40-50 cm point for holes under the fasteners, and the same labels put on the profile. Drill holes in the guides, then in the walls using the appropriate drill. The diameter of the holes should be 6 mm.

Step 3. Dowels are inserted into the holes on the walls, they are clogged with a surface with the surface, the profile applies and screw the screws.

The profile must be located strictly along the line, the horizontal deviations will lead to the consequence of the structure. For docking in the corners, the ends of profiles are cut at an angle of 45 degrees.

Step 4. Between two opposite walls are installed carriers - stringers. There should be a gap of about 10 mm between the ends of the stringers and the wall of the profile to compensate for thermal expansion. In this case, elements are located strictly perpendicular to each other.

Council. To connect each other two stringer, you must apply one to another, combine perforated holes and fix on both sides by self-reversals.

Step 5.. On the ceiling, the location of fasteners for stringers are located at a distance of 20 cm from the walls and about 0.7-1 m. Drill holes, insert dowels and screw the stringers. Self-tapping screws do not fully, leaving the ability to adjust the height of the plane location during the installation process.

Step 6. Fasten the first rake: apply it to the starting profile, insert into the stinglers grooves and click until it clicks. Between the ends of the rails and the wall of the profile there should be gaps of 5 mm.

Reiki profile (plastic)

Installation of plastic regions

Step 7. In the same way, all other rails are fixed to the location of the lamp. To make a hole under it, the panel is scheduled to the cutout center with a pencil and drill with the corona of the desired diameter. Next, the housing of the lighting device is inserted into the hole, hold it, the panel is fixed to the stringers, the wire is hardened inside and connect the light bulb.

Step 8. In the same way, all other lamps are assembled, check their work, complete the installation of entire regions. If the last plank is wider than necessary, it is cut in width with scissors for metal. The material is thin enough, so cut it is not difficult.

Council. For convenience on the rail, you need to cut the cut line, then make perpendicular cuts from the same side at a distance of 4-5 cm from each other and slightly bend the material. After that, cut off is much easier and faster.

Step 9. Pluging the last bar, check the horizontal of the coating and, if necessary, screw the screws in the stringers. The holes between the rails make it easy to do.

First, it is installed painted along the last rail, after it - a solid penultimate

Step 10. Now it remains to close the gaps with special inserts, if provided for by the design. They are cut to the desired length, insert between the rails, tightly pressed until it clicks.

The finished coating should not have gaps and slots between the elements, all rails must be in the same plane. If the ceiling is waves, it means that you have not sufficiently pulled the mounts on the stringers. To eliminate the problem, you must carefully pose inserts on problem areas, twisted the screws and return the insertion into place.

Video - which ceiling is better to do in the bathroom

Video - Montage of the Raking Ceiling