Related articles:

The communication system is an integral part of the bathroom. At the same time, the presence of open pipes can spoil the overall appearance premises, as a result of which there is a need to resolve this issue. You should first take care of how to hide the pipes in the bathroom. You also need to think about further Maintenance systems. The presence of a small door or the installation of a collapsible structure can significantly facilitate access to the communication element. Before hiding the pipes in the bathroom, this moment should be very carefully considered.

How to hide pipes in the bathroom with drywall?

Drywall is very available material that can be used for various construction purposes. Excellent performance allows the use of drywall when resolving the issue of how to close the pipes in the bathroom. In this case, attention should be paid to the need to use a variation of the material with a high moisture-resistant potential. In order to seal pipes in this way, you may need:

• moisture resistant drywall;
• screws;
• mounting strips;
• dowels;
• screwdriver;
• painting knife.

Before you close the pipes in the bathroom with drywall, you should initially take care of the preparation of the frame. The base will consist of a guide and a rack profile. It is most advisable to use a metal variation of the frame, which is made using galvanized sheet metal. Here we can talk about maximum resistance to negative corrosive effects.

At the initial stage, the layout of the future location of the main elements of the frame is made. A guide profile is set along the drawn contour. For the installation of the rack profile, small screws are used - bugs. At the final stage, the prepared frame is sheathed with plasterboard. For fixing the sheet material, ordinary screws are used. They are screwed in so that the surface of the cap sinks no more than 1 mm.

Before you hide the pipes in the bathroom with drywall, you can take care of installing a shock-absorbing tape at the points of contact between the profile and the working surface. The presence of this element will increase the stability of the entire structure, since the tape absorbs the resulting vibrations and does not transmit them to the frame.

Vlad Zhitin, expert

Thermal holes

Provided that a plasterboard box is mounted to mask hot water pipes or heating elements, then you need to take care of the preparation of thermal holes. Their presence allows thermal energy to enter the room without hindrance.

To install the thermal holes, you may need an electric drill with special nozzle... Subsequently, special swivel covers can be installed that allow you to regulate the heat supply.

Finishing work

If we close the pipes in the bathroom with plasterboard, then one of the mandatory installation steps will be finishing works... When resolving this issue, the places of fasteners and seams should be repaired very qualitatively. Also at this stage, the strengthening of internal and outer corners when using a special metal profile. This will ensure reliable protection designs from various damages mechanical type.

Finishing work also includes the application of a primer and a putty layer. After the putty has dried, you can resort to sanding the surface by using sandpaper. Subsequently, the finished box can be painted or pasted over with wallpaper.

DIY installation of pipes into the wall

Masking pipes in the thickness of the wall is a fairly popular way to resolve this issue. At the same time, it is very important to know the communication wiring diagram and have a special tool at hand. In addition, you should take care of purchasing special fasteners.

Before you hide the pipes in the bathroom in this way, you need to make small grooves in the wall. Their size must correspond to the pipes. In this case, the prepared ditches for the hot water supply system should be slightly larger, since possible thermal expansion should be taken into account.

It should be remembered that chipping the walls in a panel house is strictly prohibited. It is also recommended to refrain from a similar procedure if the thickness brick wall is minimal.

At the final stage, facing works... The main advantage of this method is that the bathroom does not shrink in size. However, if the pipe is damaged, it becomes necessary to completely dismantle the cladding layer to identify the location of the breakage. It cannot be said that this way is extremely practical.

How to hide pipes in the bathroom under the tiles?

It can take a long time to cover the pipes with tiles. This is a rather laborious process. It should be noted that this material is ideal for the bathroom. This is due to its high resistance to high humidity.

You will also need to install the frame here. The basis can be used wooden frame or a metal base. In the latter case, we can talk about practicality, since there is no need for preliminary surface treatment with special compounds.

Before hiding the pipes in the bathroom under the tiles, the frame should initially be sheathed with moisture resistant sheet material... Subsequently, a mesh is glued to the surface, which will be the basis for future tile installation.

First, the front side of the structure is tiled. After that, the tiles are laid on the end sections and on a horizontal surface. At the end, the uppermost part of the structure is revetted.

To make access to the elements of the system as easy as possible, you can install a special hatch. Such a door is slightly recessed in the wall, and pasted over with tiles on top. This will ensure that the hatch does not stand out against the general background of the wall.

Masking pipes with furniture

Using furniture to mask pipes is quite effective and very affordable way... Moreover, it is predominantly decorative in nature. Installation of hanging pedestals or cabinets provides the easiest access to the water supply system if necessary. Before you close the pipes in the bathroom with a cabinet, you need to pay attention to the location of these elements.

Under the condition of vertical placement of pipes, it is most advisable to resort to installing a pencil case. In this case, the back wall of this furniture attribute is removed, and holes are made in the upper and lower parts of the cabinet. Additionally, such an attribute can be used to store various things.

Given the high humidity in the bathroom, you must carefully choose a headset. In order to increase the overall service life in such conditions, the used furniture attribute must be pre-treated with special compounds.

Sealing pipes with plastic panels

When using plastic panels, it is also necessary to install a box. Such a finishing material is suitable for use in humid conditions, as it has a number of advantages:

• moisture resistance;
• minimum weight indicators;
• optimal thickness;
• environmental friendliness;
• ease of installation;
• affordability.

Before you hide the pipes in the bathroom under the panels, you must first calculate the amount of material that will be needed in this case. After that, the markup is carried out to install the frame.

The fastening of individual elements of the frame is carried out using self-tapping screws. The profiles are attached to the wall using dowels. Initially, it is necessary to mount the base of the frame to the wall. Before hiding pipes in the bathroom under plastic panels, you should take care of the possibility of access to individual elements of the plumbing system. For this, you can make a collapsible box.

At the end of the installation, the skirting board is installed, which is very easy to remove during dismantling. After that, the self-tapping screws are untwisted and the panels are very easily removed from the frame. Here we can talk about the practicality of the design.

How to hide pipes on the floor?

If you are faced with the task of hiding the pipes in the bathroom on the floor, then this issue can be solved with the help of a screed. It is the floor arrangement of communications that is the most optimal option.

Before sealing the pipes in the bathroom in this way, it is very important to determine the most suitable screed thickness. The implemented layer should freely accommodate communications with a small gap. In order to ensure the mobility of the pipe during expansion, it is laid in a corrugation.

The laying process should be carried out with the heating turned off. Moreover, the start of hot water supply is prohibited until the screed is completely dry. V otherwise cracks may form on the floor surface. This method of masking is not practical, since in case of damage to the system, the implemented layer has to be completely dismantled.

Alternative disguises

In addition to the above methods of camouflage, there are several more simple and accessible methods. Each of them has its own characteristics. Alternative disguises include:

• stucco molding;
• mosaic;
• roller shutters;
• metal grates;
• false walls.

Stucco molding. The use of such material does not require special skills. Stucco molding can be an excellent decorative element, which is characterized by maximum practicality. In case of damage to the pipe, the stucco molding is very easily removed and subsequently also returned to its place. The material is easy to process.

Mosaic. This solution can also be called exclusive. For camouflage purposes, it is enough to simply paste over the pipe to match the color of the tile. A feature of the mosaic can only be called the fact that such material can be used exclusively for wide pipes.

Roller shutters. Plumbing shutters are a great option for camouflaging pipes. They can be positioned as decorative element... Roller shutters are very practical to use. They provide the easiest access to the damaged section of the highway. If necessary, roller shutters are equipped with a mechanical or manual drive.

Metal grilles. These elements are mounted on an installed frame or directly to pipes. Their use allows you to add variety to the overall design concept of the room.

False walls. The advantage of this solution is the ability to simultaneously mask several pipes at once. At the same time, the installation of the so-called false walls is coupled with a decrease in the total space in the room.

What's the bottom line?

We looked at several options for how to close the pipes in the bathroom. With a sufficient abundance of ways to resolve this issue, it is quite possible to choose the most appropriate method. The final choice will depend on the characteristics of the bathroom and the characteristics of the pipes to be masked.

It is possible that you have your own ways of resolving this issue... If so, please share them in the comments.

A lot of people, planning high-quality and modern renovation in the bathroom, be sure to pay Special attention pipelines. The first question that arises at the initial stages of planning is how to hide the pipes in the bathroom in such a way that they do not take away free space and at the same time are hidden from view as much as possible. In this article, we will answer this question and demonstrate examples in the photo.

Before closing the pipes in the bathroom, it is necessary to decide in what way they will be closed, while taking into account the characteristics of the building, the size of the room and financial capabilities. The first step is to decide what type of wiring will be, open or closed. Only after that you can decide whether to hide the pipes in the bathroom in the walls, in the floor screed or in special drywall boxes.

Choosing the type of wiring

Before removing the pipes in the bathroom, you must choose the type of wiring based on the number of consumers in the room and the distance between them. Today there are two main types of wiring:

The collector type of wiring is used in cases where many consumers are installed in the bathroom. So that they do not suffer from lack of water or pressure as a result working together, each of them is supplied with a separate line from the main distributor. Hiding pipes in the bathroom with this scheme requires a large number space, since the system turns out to be quite voluminous.

The sequential circuit is used in small rooms with several consumers, to which water is supplied from a common line through separate branches. So when the valve in the washbasin is open, the pressure in the shower mixer drops significantly if it is located further down the pipe. Such a wiring takes up little space and open pipes in the bathroom can be easily hidden in the wall or under the screed.

Hidden or open wiring

At this stage, it is necessary to choose whether to close the pipes in the bathroom tightly or leave them open. If the room is spacious and allows you to arrange open wiring in special boxes without a noticeable loss of free space, then this type of wiring is usually used. But if the bathroom has limited space, then here we hide the pipes in the bathroom in such a way as to free up the maximum useful area... The choice of wiring determines how the pipes will be used in the plumbing of the room.

Important! For styling hidden wiring wall chipping is required. However, the integrity violation load-bearing structures Absolutely forbidden. Therefore, before hiding the riser in the bathroom, you need to make sure whether the wall is load-bearing.

It should also be borne in mind that not all pipes are able to provide a reliable connection on long years and in this case, before blocking the pipes in the bathroom, it is necessary to provide free access to the connection areas for technical inspection or repair in the event of a leak. To hide under a screed or finishing materials only fit polypropylene pipes where the connection takes place by means of hot soldering. Finishing pipes in the bathroom from other materials with crimp or threaded connections Not recommended.

Rules for laying hidden wiring

In order for the renovated bathroom to look as spacious as possible and all its plumbing elements work perfectly, it is necessary to adhere to a number of basic rules when planning the wiring:

• use as few connections as possible when drawing up a diagram and laying;
• when soldering polypropylene pipes, the material of the pipes themselves and the connecting fittings must be the same;
• before hiding the pipes in the bathroom, it is imperative to provide for the presence of inspection holes at the connection points or the installation of additional units for quick access during maintenance.

Important! If we hide pipes in the bathroom using any type of wiring, it is advisable to provide the hot and cold lines with insulating materials to prevent condensation from forming.

Options for masking pipes in the bathroom

Today, there are several main types of masking the pipeline and sewer from the eyes. The most common are:

• laying highways in a concrete screed on the floor;
• camouflage using furniture elements;
• laying highways into the wall;
• boxes and niches made of plasterboard or wood.

Each of the options answers the question of how to hide communications in the bathroom and we will consider them in more detail below.

Laying in a concrete screed

This method of routing is the most practical and easily feasible, since it allows you to lay highways along the shortest path. Before you brick the pipes in the bathroom under the screed, you need to take into account what will lie on top floor tiles and access to the highways will be completely blocked. Therefore, it is necessary to use only polypropylene pipes with thermal insulation, so that condensation does not form and the hot line does not lose heat. Masking pipes in the bathroom in this way is done in cases where the walls in the room are load-bearing and it is impossible to remove them.

Important! If an electric underfloor heating system is used in the room, then before sealing the riser in the bathroom with a screed, the lines must be laid along the perimeter of the room so that the pipes do not intersect with the floor heating elements.

It is also worth remembering that propylene pipes tend to expand when heated. In order to provide sufficient space for expansion, before hiding the pipes in the bathroom, in addition to thermal insulation, a corrugated sheath is installed on the line, which gives enough space for thermal deformation. Before covering the pipes in the bathroom with cement, you need to make sure that the thickness of the screed is sufficient to completely cover the pipes and create a flat surface for laying tiles.

Closing pipes with furniture

The use of furniture elements as pipe cladding in the bathroom is also a very common camouflage option. If part of the line is laid in a screed, and the outgoing pipes come out vertically along the outer part of the wall, then it is enough to purchase cabinets of the required height and, before covering the pipes in the bathroom, remove the back wall and cut holes for the pipes. Then the cabinet leans against the wall and closes visible part highways. However, this option is not always possible to implement beautifully, and usually bare pipes in cabinets quickly collect condensate. In such cases, before closing the riser in the bathroom with furniture elements, the pipes must be additionally insulated.

Wall wiring installation

This does not mean the sewing of pipes in the bathroom in finished wall by the method of trapping, and the installation of highways in the wall during the construction of a house or redevelopment of a room with the construction of new partitions. In finished panel walls, often the thickness of the slab is not sufficient for full styling pipes. Before you hide the communications in the bathroom with a panel construction, you need to make sure that the working wall is not load-bearing. V load-bearing walls only vertical striking is allowed.

During the construction of walls or the construction of new partitions, before sealing the pipes in the bathroom by laying them in the wall, polypropylene pipes with thermal insulation and corrugated protection are also used. The pipes are laid in advance in the space between the bricks and filled with mortar so that no voids are formed.

Boxes and niches for closing pipelines

Closing the pipes in the bathroom with plasterboard is the first solution that comes to mind when other masking options are impossible, since this option is the fastest and most convenient to implement. The creation of a box is the simplest, most quickly implemented and less expensive idea, but it has a significant drawback. The box for pipes in the bathroom takes up additional space and, especially in small rooms, this is very noticeable.

Before closing the communications in the bathroom with plasterboard or wood, a special frame is created from aluminum profiles or wooden blocks. Then this structure is sewn up with plastic panels, drywall, ceramic tiles or decorative wood according to the design of the room. The box for pipes in the bathroom allows you to create inspection hatches in the right places through which technical inspection or repair of communications will be carried out.

Important! If you already have to create such structures in small rooms, then before you sew up pipes in the bathroom, carefully consider the design of the box and try to use it inner space for storage household chemicals, mops, brooms and other household items.

Use of decorative screens and overlays

Before disguising the pipes in the bathroom, you should pay attention to such modern products as decorative screens or overlays, which allow you to simultaneously hide pipes and decorate the interior of the room. Screens for pipes in the bathroom are ear-ready frames different sizes with guide rails along which plastic or glass doors move. The price of such products is not high and they are installed very quickly. Their use significantly speeds up the process and they are mainly used as inspection hatches for important plumbing units and provide quick access to them.

Also, the closing of pipes in the bathroom can be carried out with special decorative overlays which are made mainly of plastic or wood. The pipe linings in the bathroom may have different variants colors or imitate materials such as stone, marble, wood. Such products will good decision for those who do not know how to hide the riser in the bathroom quickly and beautifully.

This material can be used as a guide for those who still cannot decide where to hide the pipes in the bathroom, saving space or simply updating the appearance of the bathroom.

How to hide pipes in a bathroom, close a riser in a box

How to hide pipes in the bathroom. Selecting the type of pipe routing. Description of options for hiding communications in the bathroom.

How to hide pipes in the bathroom

By pursuing renovation work in the bathroom, you will most likely want to know how you can hide the water supply and sewerage pipes. This will help to increase the aesthetics of the room as a whole. The complexity of such an event is not just a capital concealment of all communications from prying attention. This must be done in such a way as to leave them available for the current revision or repair in the event of an accident.

Stage of the project

To decide how to hide sewer pipes in the bathroom, you should carefully analyze and study the layout of the communications. It is very important to draw up an accurate project, since in apartment building all systems are interconnected. Because of this, when wrong connection communication problems can arise for you and your neighbors.

In order to correctly hide the pipes in the bathroom, you need to decide in advance where the points of connection of plumbing fixtures will be located, the likely branches and turns of the pipeline, and mark the wiring diagram right on the wall.

You can also draw a schematic plan for the location of communications on paper. It is important to take into account the scale, but it is better to clearly indicate the dimensions.

When planning to hide the pipes in the bathroom, it is necessary to lay them using the shortest route and with the minimum number of bends and turns.

Communication masking methods

Pipes that run horizontally are hidden under the screed, while risers (pipes that run vertically) are hidden under the plaster. This method involves carrying out related construction works, such as device strobe, applying a layer of plaster, laying tiles.

Communications can also be hidden by building a system of moisture-resistant plasterboard or OSB. This is done in this way - a special metal profile is attached to the wall, to which sheet material is screwed with self-tapping screws.

You should also not neglect the insulation - before fixing the sheets of drywall or plywood, it is recommended to lay a layer of foam or mineral wool on the wall. After the structure is assembled, it can be pasted over with tiles.

You can also collect furniture structures in the form of shelves or cabinets that will help with masking pipes. In addition, there will still be enough space inside for storing items that are necessary for the household, for example, household chemicals.

In the end, the pipes can be simply painted over with paint, decorated with artificial vines, pasted over with multi-colored mosaics or elements of polystyrene stucco molding - in general, you can do whatever your imagination tells you.

It is necessary to remember to exclude the way to simply tightly hide the places of threaded connections, fittings, valves and meters. Access to them should be easy.

Basic rules for hiding communications

To give the bathroom aesthetics and increased comfort, as well as to free up maximum space, it is advisable to mask all the pipes if possible. There are a number of rules, the implementation of which will enable pipelines to function for a long time and reliably:

• the number of connections should be minimal;
• fittings, such as fittings, elbows should be placed from the same material as pipes;
• valves and inspection windows must be equipped with special hatches for accessibility to the main devices of pipelines;
• it is desirable to wrap pipes a layer of waterproofing to avoid fogging, i.e. condensation.

Detailed description of masking options

There are several ways how to hide the pipes in the bathroom under the tiles. Photos, examples of which you can see in the gallery of our site, clearly demonstrate this.

To hide pipes under a screed or plaster, professionals recommend using exclusively polypropylene or copper pipes not equipped with threaded connections, but firmly soldered or welded. To choose the option that suits you the most, you need to familiarize yourself in detail with the features of each of them.

We hide communications in a screed

This concealment method horizontal pipes the most aesthetic, since they will be hidden in such a way that it will be almost impossible to find them.

Before laying, pipes are placed in a special corrugated hose... They need to be laid along the shortest route, after which a layer of cement or concrete screed... The layer thickness should be 2–3 cm higher than the pipes. After the screed is completely cured, a topcoat such as tiles, linoleum or laminated panels is laid on the floor.

It will be useful to remember that until the solution has completely hardened, the bathroom cannot be used, since hot water passing through pipes can lead to cracking of not fully cured concrete.

Tunnel construction

For the manufacture of niches in which communications are laid - the so-called strobes - it is reasonable to use an angle grinder or grinder, with a victorious or diamond disc.

Next, you need to make two parallel cuts at a distance corresponding to the cross-section of the pipe, after which, using a chisel and a hammer, remove all excess concrete between the cut grooves. The manual process will become long and tedious, so it is wiser to use a hammer drill with a chisel attachment.

Hoses with pipes are placed in the finished grooves, after which they are covered with plaster. Top flooring can be installed.

In places of threaded connections, valves or fuses, it is necessary to mount inspection hatches in order to provide access to them when such a need arises.

The advantages of this method of masking pipelines include complete hiding under the floor. However, this method has its drawbacks. Access to the pipes in the event of an accident will be limited by the dimensions of the inspection hatch. In the event of a breakout, it will be very difficult to locate its location. To do this, you will need to completely tear off the decorative coating.

Therefore, the pipes laid in the walls should only be of high quality. In this case, many problems can be avoided.

Plasterboard structures

Consider how to close the pipes in the bathroom with drywall. This is one of the most common ways to camouflage a sewer riser. Boxes of several levels will be an excellent solution to hide communications, visually enlarge the space, while at the same time gaining unrestricted access to the pipeline. The structure consists of galvanized profiles fixed to all planes of the room, to which sheets of drywall are screwed with special screws. It is this material that acts as a basis for laying tiles.

It is important to consider the need to equip these systems with inspection holes for control at the joints, valves, meters, filters.

Another method of masking pipes using drywall is the construction of an additional partition, the so-called false wall. One more technology can be used for this. Below is an example of how to hide pipes in the bathroom with your own hands with plastic panels. As a rule, this method is used in large bathrooms.

Masking partitions can be straight and oblique. Slanting false walls are located at an angle relative to the load-bearing walls. They also need to be equipped with inspection hatches for access to communications.

Rolled metal shutters

Roller shutter installation will completely solve the issue of getting access to the pipeline. Also behind it you can equip shelves for storing household items. In particular, it would be ideal to store household chemicals there. Because the roller shutters are lockable, you don't have to worry about the safety of your little ones. Installation of this device will not pose any particular problems, and the color can be easily matched to the tone of the tile.

However, such shutters may not stylistically match the interior design of the bathroom. In addition, they are made from rather unreliable materials, and shutters can be easily crushed or broken if handled carelessly.

Furniture camouflage pipes

Furniture systems will become one of the most convenient and functional methods for hiding pipes in a bathroom. Well-chosen furniture will bring luxury elements to the interior design. As a rule, to hide communications in the bathroom, cabinet systems with shelves equipped with sliding or hinged doors are often used. This choice directly depends on the total area of ​​the bathroom and the location of plumbing fixtures in it.

Typically used for the manufacture of bathroom furniture laminated chipboard, and it must be moisture resistant. At the end of the installation, it is necessary to process silicone sealant all gaps and joints to protect furniture from contact with water. Although chipboard is considered moisture resistant, it can become unusable from the constant influence of water.

Masking water supply, sewerage and heating in a room with furniture has a significant disadvantage, such as low resistance to the influence of water. Of course, manufacturers make all countertops and laminated slabs for a bathroom moisture-resistant, although, as a rule, this does not save furniture either - it quickly loses its attractive appearance.

This can be partially avoided by regularly monitoring the degree of wetting of the furniture in the bathroom. To do this, you need to wipe it dry after each visit to the bathroom. In addition, it is necessary to regularly check the places where the silicone sealant is applied for deformation.

An important advantage of this method of hiding conductive communications in the room is high aesthetics, as well as functionality, since the cabinets can be used as an additional storage system.

In short, solving the problem of hiding pipes in a bathroom requires a thoughtful and planned approach. Since, if the piping is improperly installed, almost all residents can remain without water supply along the riser at the entrance. To prevent this from happening, you should take into account all the nuances of such work and choose the most suitable masking method for your bathroom.

How to hide pipes in the bathroom under the tiles with your own hands

When repairing a bathroom, many are wondering how to hide the pipes in the bathroom under the tiles. A photo and description of all solutions to such a problem will help you with this.

Wall strobing

The ideal option is to hide the water pipes in the grooves (knocked out grooves in the wall). However, few people know that in load-bearing walls only allowed vertical slitting not deeper than the tie reinforcement (violation of its integrity is not allowed). Horizontal however, grooves can significantly weaken the strength of the wall, so they are strictly prohibited. It is also unacceptable to lay pipes in reinforced concrete interfloor ceilings.

Horizontal gating of walls is allowed only if the wall is not load-bearing

Any threaded connections.

Free access to water meters and stopcocks must be ensured.

Embedding sand cement mortar

Plasterboard frame

In the event of a pipe leak, removing the drywall sheet and fixing the problem is much easier than hollowing out the concrete. That is why the method of hiding communication with sheets of drywall followed by gluing tiles is the most common.

UD profile (guide)

Attaching the self-adhesive tape

Fastening profiles with straight hangers

The rack profile is inserted into the groove of the guide

The frame is assembled from wooden slats

A ready-made frame for a box, assembled from metal profiles

Plasterboard boxes. Bottom view

Plasterboard installation

To protect yourself from the appearance of mold, you should use moisture resistant drywall(marked with GKLV). Most often, such sheets have green color, but some manufacturers also produce it in other colors.

Drywall is attached to the profile using self-tapping screws

Plasterboard can also be used to close the pipes supplied to the toilet.

A ready-made inspection hatch can also be purchased at a hardware store.

The original cabinet will not only close the pipes, but also become a place for storing household supplies

How to hide pipes in the bathroom in the wall, under the tiles

From the article you will learn several ways to hide pipes in the bathroom in the wall or under the tiles. Added a lot of photo and video material.

Repair alphabet

We will build a house ourselves from foundation to roof

How to hide pipes in the bathroom

Photo 1 - Hiding the pipes in the bathroom

Sewer and water pipes being in plain sight can spoil even the most original design, so you need to hide them.

Rules to follow when hiding pipes

To make the bathroom look stylish and at the same time all systems work properly and for a long time, you need to follow a few rules:

• Use pipes with a minimum number of connections, which is ensured by competent wiring and correct placement of equipment;
• Use connections that use the same material as pipes. At the same time, the safety margin should also be identical, or better, it would be higher.
• To have quick and convenient access to taps, valves and other items of equipment during inspection or urgent repair special hatches should be provided.

Photo 2 - Plastic pipes in the bathroom

To prevent the formation of condensation on the pipes, use insulating materials... If the pipes are planned to be hidden in the wall, such insulation will also allow them to expand freely, which is especially important for pipes with hot water.

Photo 3 - Insulating material for pipes

Several ways to hide pipes

If there is a need to hide communications in the bathroom, then there are several proven methods.

Masking pipes with furniture

Hide all communications behind hinged or built-in furniture- the simplest, fastest, and at first glance inexpensive option... For example, if the pipes are located mainly vertically, then you can buy an ordinary pencil case, the right size... It remains only to remove the back wall and make the necessary cutouts on the panels at the top and bottom. The result is a cabinet in which you can remove many different things, among which there will be pipes.

Photo 4 - Masking pipes behind the bedside table

However, this method has a significant drawback. In the place where the pipes pass, always high humidity , and it is difficult to find furniture that can withstand such a load for a long time. All surfaces can be further processed moisture-proof material but it will take a long time and is not cheap.

Installation of pipes into the wall

This method is convenient if the house is still under construction or redevelopment is being done. To hide pipes in the wall you will have to do it, but if the walls are panel, then the execution of such work in the horizontal direction is prohibited. Quite often, the walls are not thick enough to carry out such work.

Photo 5 - Installation of pipes into the wall

It should be remembered that metal pipes, as well as any communications with threaded connections, cannot be used for wall mounting. It is important to correctly route the pipes, and be sure to take into account tile thickness if veneering is to be carried out. Next, you need to install thermal insulation. It remains only to produce plastering work, close the pipes and can be lined.

Photo 6 - Pipes in the bathroom wall

Photo 7 - Pipes in the bathroom wall

How to use boxes and niches for masking pipes

The construction of the box can be considered one of the ways bathroom remodeling, quite simple and convenient. A metal profile of the desired shape, or several wooden blocks of the required length and section, are sheathed with sheets of drywall, which needs subsequent finishing. Easier and faster, you can build a box using plastic panels.

Photo 8 - Box for pipes in the bathroom

Niches for masking pipes are erected in a similar way, but they allow you to hide not only plumbing lines, but also washing machine, washbasin, etc.

Boxes and niches have a serious drawback - they occupy the area, which is very important in a small room.

We close the pipes using a special screen

Currently, the choice of screens in stores is wide enough. It is a frame with two guides, to which plastic or drywall panels are attached.

Photo 9 - Screen under the bath photo

The cost of the screen is not high, but at the same time it looks very original and attractive. In addition, it is easy to remove, which makes access to communications easy enough. The disadvantage is the same as that of boxes and niches - it takes several centimeters of usable area.

Features of masking pipes with a plasterboard wall. Instructions for use

This option is easy to install, as well as low cost. Set plasterboard wall it is better in not yet inhabited premises, where the owner determines the place of the partition. This option for masking pipes is also suitable for large bathrooms.

At the first stage, you should prepare everything necessary materials and tools.

Now you can start building the frame:

Photo 10 - Installation of a plasterboard box for pipes

Photo 11 - Installation of a box for pipes

Now you can start plastering the frame with plasterboard:

1. Workpieces of the required size are prepared. To speed up the process, this work can be done in advance;
2. Fixing sheets with self-tapping screws, the type of which is determined by the materials used. Their caps should not go deep;
3. All excess sheets must be removed with a saw or jigsaw. If its length is insufficient, then the joint should not coincide with the transverse bars.
4. Holes are cut for the outlet of pipes and an inspection hatch;

Photo 12 - Installation of a box for pipes

Photo 13 - Finishing the box with tiles

Installation of a duct for plasterboard pipes video

When choosing a way to hide pipes, you need to be guided by the size and style of the bathroom, as well as personal preferences and financial capabilities. You can use any of the above options, while no one restricts in creating your own method, which will be more interesting and practical.

How to hide pipes in a bathroom the right bathroom to hide pipes in a wall in a closet in drywall

The ABC of repair We will build a house on our own from foundation to roof How you can hide pipes in the bathroom Photo 1 - Hiding pipes in the bathroom Sewer and plumbing

Communication in the bathroom or in the kitchen is like annoying relatives that spoil the overall look and reduce the level of comfort in the entire room.

It so happens that the owners work long and hard to create a truly beautiful and stylish interior.

However, pipes and risers treacherously strive to put all their efforts down the drain, standing out from the general picture and attracting undue attention to themselves.

In addition to aesthetic dirty tricks, such details can also spoil in another way, for example, cold pipes can significantly reduce the temperature in the bathroom and at the same time increase the degree of humidity in the room.

Due to the condensation that constantly forms on them, which in turn will drip onto the floor and will need to be wiped regularly.

They will harmoniously overlap with the overall design, while creating a holistic picture of morning preparations for your favorite work.

Ways to hide communications

There are several ways to accomplish this task.

However, the simplest situation will be when the renovation is done from scratch and all the little things are taken into account.

The implementation of which can be thought over initially, so that later there will be no problems.

Installation under tiling

The piping in the bathroom must be done before plastering is done. So that an even layer of plaster does not have to be made too thick, communications should be "drowned" in the wall, for which channels are made in them for pipes.

This is done in an elementary way - with light movements of the grinder, cuts are made according to the initially drawn scheme of parallel laying of the water supply system. The depth and width are taken into account based on the corresponding parameters of the pipes.

After the "cuts" are made, we proceed to cleaning the resulting channels. This can be done with a chisel or hammer drill. The choice of tools depends on how much you love and value your neighbors, who will undoubtedly appreciate the melody of construction tools.

It is worth noting that modern plastic communications will not require any additional thermal insulation, and after plastering the wall, it will be possible to proceed with the installation of ceramic beauties.

What about sewer pipes?

You probably already figured that in this case, it is unlikely that it will be possible to drown the pipe into the wall because of the huge diameter. We'll have to resort to less radical, but from this no less effective methods, namely decorative cladding, concrete, oily eyes, areas of the bathroom.

As a rule, you will need to make a frame, which is a box, framing the sewer section and cover it decorative material, similar to the one used for wall decoration.

The shape of the frame can be different, but for greater convenience it is better to use rectangular section boxes, at least for those areas that are located horizontally. For risers or vertical pipes, you can make a box with a round, semicircular or oval cross-section.

Frame cladding

You can do the same with the entire plumbing system. The frame can be installed on all surfaces, it will hide all pipes, but in this case the area of ​​the room will decrease. If you are not afraid of such an outcome, then you can safely proceed.

However, mention should be made of such important detail as thermal insulation of a water supply system. The fact is that even the most modern plastic products are not insured against condensation on them, even if not a significant formation of moisture, which can cause excessive dampness in a room, where the humidity is already significantly increased.

To prevent the above destructive or at least unpleasant processes, it is necessary to wrap the pipes thermal insulation material, say flexible rubber or glass wool.

In order to finish (in a good sense of the word) the frame, you should use moisture-resistant materials that, when faced with the water element, will not give a swing and withstand the onslaught, preserving their original appearance.

For such purposes, the following will work great:

• Plastic;
• Textolite;
• Styrofoam tiles (1-2 cm thick);
• Ceramics;

With the exception of ceramics, all of the above is mounted on the frame using ordinary self-tapping screws, while the corners and joints are masked with decorative overlays that are attached to silicone. To close the box with tiles, you first have to build a solid base.

To do this, you need to use a special nylon or steel mesh with a mesh size of 2x2 mm. Then the resulting surface is covered tile adhesive and after a day, you can start laying the tiles, behaving as if there were no mesh and the ceramics lay on an ordinary wall.

Photo how to hide pipes in the bathroom

Hiding the pipes means making the bathroom cozy and modern room for relaxation, rest, hygiene procedures.

The easiest way to solve the problem is how to close the pipes in the bathroom with plastic panels - this is an affordable and functional material.

The easiest ways to mask pipes

• Mosaic. An exclusive solution, how to disguise the pipes in the bathroom is simply to glue them over with mosaics to match the color of the tiles on the walls and, thereby, make them an effective decorative element. This method is only suitable for wide sewer pipes.

• Stucco molding, polyurethane tubes. To solve the question of how to hide pipes in a bathroom in an aristocratic style, you can drape them with polyurethane stucco molding.
  This lightweight material does not require special installation techniques, and its variety allows it to adapt to any style.
  This successful decorative element is a versatile decoration, and in the event of a pipe leaking, it can be easily removed. The material is easily cut with a hacksaw. This option is suitable for vertical pipes.

• Roller shutters in the bathroom. How to seal the pipes in the bathroom? Plumbing shutters are an excellent aesthetic element of bathroom decor in modern style(modern, hi-tech, etc.).
  In addition, they do not take up precious space and allow in an emergency to get to the communications hidden behind them in a matter of seconds. The specialist will install them with high quality, equipping them with a mechanical or manual drive.

• Metal grilles. Sparkling chrome grilles to match the same taps and other plumbing details will perfectly decorate fancy bath in high-tech style, so it will be a great solution in this way.
  Mount them on metal frame or directly to pipes. Here is an excellent solution to the question, how to clean the pipes in the bathroom so that they become its decoration.

• False walls... Graceful and discreet. they will be an excellent solution to the issue, but, most importantly, they will hide several pipes at once, which no other disguise is able to do.
  In this case, the bathroom space will inevitably decrease.
  However, there is no alternative in this case. How to hide the pipes in the bathroom: either the coziness and beauty of the bathroom, or bare, coarse numerous pipes, as in the basement. Such a major solution to the problem of how to sew pipes in the bathroom will give comfort and aesthetics to the room where we start and end our day.

Note!

Lining and lining of pipes reduces their noise during operation. Nevertheless, if the pipes in the bathroom are buzzing - how to solve the problem quickly, special tools will help.

For example, heaters on pipes will not only reduce noise, but also extend their service life, protecting them from moisture and deformation of the joints.

Masking pipes with plastic

Plastic sheeting is the most suitable material for a bathroom. It does not deform from moisture and temperature, easy to clean, always looks bright and modern.

But, most importantly, it can be securely and without much difficulty attached to pipes and walls. And its various imitations under wood, stucco molding and even metal are suitable for a bathroom in any style. Therefore, only plastic decides the question of how to close the pipes in the bathroom, invariably in its favor.

We will need a pencil, tape measure, a hacksaw for metal with a 1 mm blade, nails, screws or a stapler, a hammer, silicone glue, plastic and plastic guide bars for the frame. Although the frame can be made of metal or wood.

This closure of pipes in the bathroom takes place in a specific sequence.

• We fix the guide bars on the wall perpendicular to the future plastic panels, checking the level.

Frame installation

• We cut off the plastic parts for the frame sheathing with a hacksaw. At the same time, we maintain its decorative pattern.
• Finally, we attach the panels of the box to the frame with self-tapping screws, staple staples or nails.
• For reliability, we will lubricate the attachment points with silicone sealant, which will not let moisture into the joints.

Fix plastic panels successfully solving the problem - how to close the pipes in the bathroom

The locker disguises the vertical pipes

How to hide vertical pipes in a bathroom mounted in a niche or on a wall surface? They can simply be disguised as a locker.

Instructions

• Choose a cabinet according to your measurements.
• Attach the cabinet frame or hinges to the wall.
• Cut pipe holes on the top and bottom of the cabinet.
• Frame or hang the cabinet on the hinges.

Collapsible tile structure

You can close any pipes in the bathroom, making them invisible, using tile, the same as the wall cladding. And collapsible structures on pipes are not a whim, but an urgent need in the event of a leak and emergency repair.

For its device, you will need the following materials and tools:

• Metal profiles
• Drill with feather drills
• Tile
• Plastic corners
• Self-tapping screws
• Tile cutter or hacksaw for metal.

Instructions: how to seal bathroom pipes with tiles.

• We mount the frame from metal profiles.
• Cut out the tiles to fit the frame.
• We drill holes in the tile with special feather drills at the joints with the frame.
• We fix the tiles on the frame with self-tapping screws and install plastic corners.

Masking pipes with a wooden box

You will need:

• boards 10-20 mm thick;
• nails, hammer;
• tape measure, pencil;
• drill, hacksaw;
• wooden plugs;
• tile, tile glue.

Instruction: sealing pipes in the bathroom with boards.

• Board 1. Determine the width of the box: measure the distance from the face of the pipe to the wall, add 2 cm. Saw off the board.
• Board 2. The length of this board is equal to the height of the room.
• Board 3. Attach board 2 to the pipe and measure the distance to the wall, taking into account that board 2 will cover board 3 in order to securely nail both boards together. Saw out the board 3.
• Connect planks 2 and 3 with nails in four places.
• If necessary, drill a hole in board 2 (for example, for a hose outlet).
• Drilling the wall is a prerequisite to clean the pipes in the bathroom. Drill a little obliquely 3-4 holes of 40 mm at an equal distance, make an indent of 1 cm from the corner of the bathroom. Drive wooden plugs into the resulting holes.
• Draw lines on the wall from the middle of the plugs - this will help you hit them with a nail right off the bat.
• If the box is installed over the toilet, turn off the water, unscrew the hose, place the box against the wall, and then pass the hose through the special hole and screw it on.
• Nail the box, hammering nails exactly into the corks.

• You can stick tiles or mosaics on wood.

Moisture-resistant drywall, plywood, chipboard will facilitate the sewing of the box.

Painting pipes in the bathroom

How to paint pipes in the bathroom so that there is no room for corrosion, and the result is preserved for a long time even with high humidity in the bathroom? The correct choice of materials and competent preparatory work are important in this process.

For painting you will need:

• oil or water-based paint;
• anticorrosive soil;
• flat brush (flutes);
• rags;
• gloves;
• spatula, building hair dryer (desirable);
• sandpaper.

Instructions

• Thoroughly clean old paint from pipes. It is best to heat the surface of the metal pipe with a construction hairdryer and remove all layers of old paint. The coating can be removed with a spatula. Then you need to grind the entire pipe sandpaper removing paint residues and rust. And, of course, remove dust after work done.
• Carry out further work only on a cold dry surface, so turn off the water supply until the paint is completely dry.
• Treat the pipe surface with an anti-corrosion primer - this will significantly slow down the destruction of metal under the influence of humidity in the room.
• The paint from the pipe joints always drips onto the floor, so make sure it doesn't get dirty.

Note! Anti-corrosion enamel combines wear-resistant enamel, anti-corrosion primer and rust remover, and is ideal for pipes in the bathroom.

• Paint the rear and hard-to-reach places without leaving streaks or gaps. Vertical pipes paint from top to bottom.
  Take very little paint on the brush, make small strokes. Even if you plan to close the pipes in the bathroom with a box or cabinet, paint them in the color of the walls - this is an important stylistic touch.

Cover pipes for hot water bathtubs with special paint - enamel for radiators.

• After the first coat has dried, coat the pipe with another one for a thorough and more even painting. This will finally solve the problem of how to mask the pipes in the bathroom.

Viewing various photos and videos on how to camouflage pipes will help you find the best option for you.

In order for the structure hiding the pipes to serve for a long time, you should adhere to certain rules.

1. The structure must be assembled from suitable materials

This means that only moisture-resistant and resistant to aggressive coatings are used for work. It is necessary to remember about the special conditions in where it is almost constantly hot and humid. Moreover, moisture is a mixture of water and quite aggressive detergents, which further enhances its destructive effect.

2. The pipelines must be in excellent technical condition

It is desirable that they are plastic with a minimum number of connections and turns. Metal pipes are subject to corrosion, which will be very difficult to see under the skin.

3 best ways to hide pipes

In fact, there are a lot of such techniques, so it is quite easy to choose for your bathroom the best option satisfying in terms of results and labor costs.

1. Remove communications in the walls or floor

This is the most time consuming method, but at the same time it gives best result and does not require the construction of a subtractive free place frame. Its main drawback is considered to be the danger, which will lead to the need to dismantle the entire structure, including finishing, and costly repairs. Therefore, in this way they only mask plastic pipes for different purposes without detachable connections.

Plumbing can be installed in the wall. For this, grooves of a suitable size are grooved. Such that the pipe fits freely inside. It is advisable to choose the shortest trajectory with a minimum of turns. If it is planned to lay two pipes in parallel, with a hot and with cold water, for each groove a separate groove is made with a distance between them of at least 0.3 m. It is forbidden to lay them in total.

Before installing the structure, it is advisable to equip the grooves with a foam rubber or thermoflex sleeve in order to minimize problems from the appearance of condensation and thermal expansion. After laying the pipes, the grooves are sealed with cement mortar. The sewer line can be laid in a screed. If its length is long, be sure to use a corrugation, which is put on the pipes before laying. This will allow them to expand freely when heated.

2. Hide the pipes under the tiles

A frame is being built, under which the pipes are located. The structure is decorated with ceramic tiles. In this case, several or more are necessarily performed, depending on the length of the pipeline. The shape of the frame and its location can be any, they are determined by the desire of the owner. Most often, the design is suitable for furniture or plumbing fixtures.

For the construction of the frame, impregnated with a protective solution is used wooden block or a profile. In any case, a structure is assembled, which is securely fixed to the wall, floor or ceiling. For cladding, sheets of plywood or chipboard are used, but always moisture-resistant grades. Openings for inspection hatches are arranged on the sheathed frame to provide access to the pipes. Then the base is reinforced with a special mesh.

The tiles are laid directly onto the mesh. Used for installation. Tiles are also glued to the cover of the inspection hatch. After complete drying of the solution, grouting is performed. It is advisable to additionally cover them with antifungal mastic.

3. Cover the pipes with a drywall box

For work, you can use only one that differs from the standard sheet in green color. Such panels are impregnated protective compounds and are able to resist moisture. Drywall is mounted on a frame made of metal profiles, the size and shape of which depends on the length and configuration of the pipeline. Work begins with the assembly of the frame.

In the process of arranging it, it is securely fixed to the walls and floor. Then the frame is sheathed with drywall sheets. It is important to remember that the material has front side, it must be outside. Self-tapping screws are used to fasten the canvases, their caps are sunk into the base by about a millimeter. An opening is cut out on the prepared box for the inspection hatch. The door is hinged.

If hot water supply or heating pipes are laid inside the structure, several small holes must be made on its upper wall. On the bottom, it is also advisable to make a hole in order to immediately notice the leak. To strengthen the corners of the structure, they are covered with special perforated corners. The finished box is rubbed with a float, then plastered. All seams are carefully closed. After drying, proceed to finishing.

For sheathing the frame, plastic panels are also used, which also gives a good result. By using one of these methods, you can hide various piping shapes, including the most complex layouts. The effort spent will pay off handsomely. will become much more attractive if engineering communications are not visible.