DIY loft table. How to create a trendy loft-style interior? Do-it-yourself loft-style chest of drawers

Creating loft-style furniture with your own hands is not the most difficult task. It does not require large expenditures and fine work... But you can't do without a sense of style.

The loft was born in the middle of the twentieth century during the conversion of industrial premises into residential ones. Today he increasingly comes to small and large apartments, outwardly adapting them for industrial areas. Here you can combine metal, wood, glass. At the same time, the space remains only conditionally zoned. Walls, pieces of furniture are made quite roughly, most of them are universal and mobile.

Table, console or bedside table

The offered item can serve as a bedside table, console, small mobile bar counter, TV stand. He will find a place and tasks in any corner of a loft-style apartment. The dimensions of the table are 60 ″ x16.25 ″ x36 ″ (152.4 x 41.3 x 91.4 cm).

Prepare to get the job done

List necessary materials:

Pine boards.
2 pieces of galvanized pipe 1/2 "(1.3 cm) in diameter, 60" (152 cm) long.
Galvanized pipe caps - 4.5 "(11.4 cm).
4 large swivel furniture wheels.
Drill with drill.
Pocket hole device.
Roulette, carpentry square.
End wrench.
2 ″ (5 cm) screws.
2.5 "and 1.25" (6.4 cm and 3.4 cm) pocket screws.
16 hex head screws.
Large screws for attaching swivel wheels.
Screwdriver.
Joiner's glue.
Sandpaper.
Stain.
Matt varnish for wood.

Prepare wooden parts table by cutting them circular saw... Or order a cut in the workshop, providing a list of required elements:

4 bars, 5.25 "long;
6 boards 56.5 ″;
4 boards 11.25 ″;
4 pieces 27.75 ″;
3 boards 59.5 ″;
1 piece 56.5 ″;
1 piece 51.5 ″.

Work description

Start assembling the side parts of the table. To do this, install small strips 5.25 "(13.3 cm) long, connecting them in pairs at the top and bottom of the 27.75" (70.49 cm) parts. Using a special device, prepare hidden (pocket) holes for their connection. Apply glue to the contact points and holes. Use a screwdriver to screw 1.5 "(3.81 cm) screws into the prepared holes.

Attention! Be sure to use wood glue when assembling. Any excess protruding at the joints should be removed immediately with a damp sponge. Then the finish will lie evenly, without stains.

Check 6 boards each 56.5 "(143.5 cm) long, they should be exactly the same. Prepare 2 pocket holes at the ends of each.
Screw 2 planks each to the matching long edges of the middle and bottom shelves.

To make the bottom and middle shelves the same, attach 11.25 ″ (28.6 cm) end strips to the middle end strips.
Place the bottom shelf at the bottom of the side bases, and the second one approximately in the middle. Use glue and large Euro screws for the connection.
Attach the two remaining 56.5 "(143.5 cm) strips to the top of the sidewalls. They will be under the top shelf.
Also, with the pocket holes prepared in advance, assemble the top shelf from 3 planks 59.5 "(151.1 cm). Replace it.
By using special attachment prepare holes for metal parts. They will serve as a rear shelf limiter. The holes should be approximately in the middle, at the same distance from the shelf below.
Check how the rod falls into place.

Get busy finishing table.

Special composition fill in the screw holes.
Lightly sand the shelves and walls, removing large defects and excess filler.
Cover the garment with a stain. Leave to dry.
Apply 1 coat of matte varnish to the table. Let the coating dry.
Flip the shelf. Place the wheels on the large screws and glue.
Insert the stop rods into place.

Loft bar stool

Complete your mobile console table with matching bar stools. If necessary, they can become stands for flowers, lamps or a bedside table. In addition, the seat height can be adjusted to the most comfortable position.

What to buy

2 boards with a section of 2x2 (5x5 cm), 8 feet long (243.8 cm);
round board diameter 12 ″ (30.5 cm) or 2 × 12x12 (5x30.5x30.5 cm) for the seat;
metal screw rod with a diameter of at least 3 cm;
welding machine(if you know how to work with him), means of protection;
device for preparing pocket holes;
drill;
circular saw;
metal plate;
nuts and washers;
screws for pocket holes;
glue for wood;
sandpaper;
roulette;
square;
pencil;
putty;
stain;
varnish for wood.

Prepare parts according to the list:

2 pieces 12.5 "(31.8 cm) long for base crosspiece. At the ends of the parts, non-parallel bevels of 10 degrees.
1 piece of the top of the base made of 3/4 "(1.9 cm) plywood, 8.5x8.5" (21.6x21.6 cm) long.
4 support elements 2x2 (5x5 cm) 23.5 ″ long with parallel bevels of 10 degrees at the ends.
4 crossbars 2x2 (5x5 cm) 9.6 "long. The ends have non-parallel 45 degree cuts.
1 round seat piece 12 "(30.5 cm).

Chair Assembly Description

From the part of the top of the base, cut off all 4 corners at 45 degrees, as shown in the figure below.
Apply markings to both structural elements crosses. Using the marks, use the circular saw to make the center grooves to a depth of 0.75 "(1.9 cm). When connecting (only with glue), the parts should be flush.
Assemble the base of the chair. Prepare the pocket holes first. Then make connections with glue and screws.
Attach the outer footrest parts with screws on the outside. You only need one screw for each connection. Secure them with glue.
Place a large screw rod to the center of the metal plate (by welding) to hold the seat. If you have no experience with such work and equipment, contact a workshop.
In the middle back side mark the seats. Then attach the 4 large screws and the metal plate to the wood glue.
Using a special bit, drill a screw hole in the cross and the same one on the top of the base. Check if the screw rod can fit into them.
Fill the screw slots with putty. Let the composition dry.
Using sandpaper, lightly sand the surface of the structure.
Cover the garment with a stain. Leave to dry completely.
To make the chair last longer and have a finished look, apply 1-2 coats of varnish to the wood.

Now you can arrange your own loft corner on the balcony, kitchen, living area, etc.

Our today's article will be devoted to an unusual industrial style, or rather, we will look at how to create a loft-style decor with your own hands at home.

The loft and style in the interior of the same name appeared in the middle of the last century in the USA. Old, decommissioned factories and warehouses are beginning to be settled by enterprising creative people, artists, photographers and other freedom-loving personalities.

The difference between loft rooms can be called huge ceilings, large windows that give maximum light, freedom of planning interior space and the spirit of industrialism.

To fully feel the spirit of this style, you need to add loft-style decor to the space. Since these things can be called rude, sometimes brutal and unprepossessing, they can quite be done with your own hands at home.

Loft style furniture

The pieces of furniture that can be seen in loft-style interiors are often quite clumsy. Such furniture can be made independently from ordinary wooden pallets.

Pallets are used not only for creating country furniture, such items will fit well into an industrial loft-style interior.

Almost any piece of furniture can be made from wooden pallets:

bed
sofa
shelves
racks

Coffee table made of wooden pallets

First of all, process the surface of the pallet from burrs and chipping, you can use an orbital sander or sand it by hand. Then, it is better to treat the wood surface for protection with stain, paint or varnish so that the furniture will last longer.

Then just fasten the pallets together with nails, screws or glue, add legs and voila, new item loft-style furniture is ready.

If you put glass on a finished table, a very practical sample will come out.

Loft style bed

It is very easy and simple to put together a bed from wooden pallets. Just bond together required amount pallet, cover with paint and / or varnish. Place a mattress on top - a stylish bed is ready.

Pallet sofa

You can even make a sofa from wooden pallets, just attach its back to the base with corners. To strengthen the structure, additional wooden slats can be placed on the sides.

What else can be made from wooden pallets?

Underframe with drawers under the countertop in the kitchen.

Rack

DIY loft-style lamps

In order to finally emphasize the loft style in your interior, the designers recommend using lamps that create a special atmosphere and the desired entourage.

The loft style is characterized by various pendant lamps on long wires, where the base is ordinary bulbs or Edison lamps. Such lamps can be framed with frames made of metal, mesh or any other materials.

Such ceiling lights are not difficult to make yourself at home.

Workshop on making a ceiling lamp in an industrial style.

Also in the loft style, floor-standing lighting eg floor lamps. They are based on metal elbows connected by hinges or swivel mechanisms.

Wall lamps made of water pipes- one of the main trends in the loft interior.

dav

A characteristic feature of the loft style is the use of household items as decor. How do you like a bicycle hanging on a wall and used as a decorative unit.

Also, many people use graffiti in their loft-style homes.

Loft wardrobe with own hands made of wood and pipes | Curbstone in the hallway on wheels | Carpentry DIY

DIY: Concrete Flower Pot Loft Style

Master class: Volumetric letters from concrete. Loft-style design

DIY. HANGER AND SHOE SHELF IN LOFT STYLE

Creating loft-style furniture with your own hands is not the most difficult task. It does not require large expenditures and delicate work. But you can't do without a sense of style.

Table, console or bedside table

Prepare to get the job done

List of required materials:

Pine boards.
2 pieces of galvanized pipe 1/2 "(1.3 cm) in diameter, 60" (152 cm) long.
Galvanized pipe caps - 4.5 "(11.4 cm).
4 large swivel furniture wheels.
Drill with drill.
Pocket hole device.
Roulette, carpentry square.
Socket wrench.
2 ″ (5 cm) screws.
2.5 "and 1.25" (6.4 cm and 3.4 cm) pocket screws.
16 hex head screws.
Large screws for attaching swivel wheels.
Screwdriver.
Joiner's glue.
Sandpaper.
Stain.
Matt varnish for wood.

Prepare the wooden parts of the table by cutting them with a circular saw. Or order a cut in the workshop, providing a list of required elements:

4 bars, 5.25 "long;
6 boards 56.5 ″;
4 boards 11.25 ″;
4 pieces 27.75 ″;
3 boards 59.5 ″;
1 piece 56.5 ″;
1 piece 51.5 ″.

Work description

Start assembling the side parts of the table. To do this, install small strips 5.25 "(13.3 cm) long, connecting them in pairs at the top and bottom of the 27.75" (70.49 cm) parts. Using a special device, prepare hidden (pocket) holes for their connection. Apply glue to the contact points and holes. Use a screwdriver to screw 1.5 "(3.81 cm) screws into the prepared holes.

Attention! Be sure to use wood glue when assembling. Any excess protruding at the joints should be removed immediately with a damp sponge. Then the finish will lie evenly, without stains.

Check 6 boards each 56.5 "(143.5 cm) long, they should be exactly the same. Prepare 2 pocket holes at the ends of each.
Screw 2 planks each to the matching long edges of the middle and bottom shelves.

To make the bottom and middle shelves the same, attach 11.25 ″ (28.6 cm) end strips to the middle end strips.
Place the bottom shelf at the bottom of the side bases, and the second one approximately in the middle. Use glue and large Euro screws for the connection.
Attach the two remaining 56.5 "(143.5 cm) strips to the top of the sidewalls. They will be under the top shelf.
Also, with the pocket holes prepared in advance, assemble the top shelf from 3 planks 59.5 "(151.1 cm). Replace it.
Prepare holes for metal parts using a special tool. They will serve as a rear shelf limiter. The holes should be approximately in the middle, at the same distance from the shelf below.
Check how the rod falls into place.

Take care of finishing the table.

Fill the screw holes with a special compound.
Lightly sand the shelves and walls, removing large defects and excess filler.
Cover the garment with a stain. Leave to dry.
Apply 1 coat of matte varnish to the table. Let the coating dry.
Flip the shelf. Place the wheels on the large screws and glue.
Insert the stop rods into place.

Loft bar stool

Complete your mobile console table with matching bar stools. If necessary, they can become stands for flowers, lamps or a bedside table. In addition, the seat height can be adjusted to the most comfortable position.

What to buy

2 boards with a section of 2x2 (5x5 cm), 8 feet long (243.8 cm);
round board with a diameter of 12 ″ (30.5 cm) or 2 × 12x12 (5x30.5x30.5 cm) for the seat;
metal screw rod with a diameter of at least 3 cm;
welding machine (if you know how to work with it), protective equipment;
device for preparing pocket holes;
drill;
circular saw;
metal plate;
nuts and washers;
screws for pocket holes;
glue for wood;
sandpaper;
roulette;
square;
pencil;
putty;
stain;
varnish for wood.

Prepare parts according to the list:

2 pieces 12.5 "(31.8 cm) long for base crosspiece. At the ends of the parts, non-parallel bevels of 10 degrees.
1 piece of the top of the base made of 3/4 "(1.9 cm) plywood, 8.5x8.5" (21.6x21.6 cm) long.
4 support elements 2x2 (5x5 cm) 23.5 ″ long with parallel bevels of 10 degrees at the ends.
4 crossbars 2x2 (5x5 cm) 9.6 "long. The ends have non-parallel 45 degree cuts.
1 round seat piece 12 "(30.5 cm).

Chair Assembly Description

From the part of the top of the base, cut off all 4 corners at 45 degrees, as shown in the figure below.
Mark both structural elements of the crosspiece. Using the marks, use the circular saw to make the center grooves to a depth of 0.75 "(1.9 cm). When connecting (only with glue), the parts should be flush.
Assemble the base of the chair. Prepare the pocket holes first. Then make connections with glue and screws.
Attach the outer footrest parts with screws on the outside. You only need one screw for each connection. Secure them with glue.
Place a large screw rod to the center of the metal plate (by welding) to hold the seat. If you have no experience with such work and equipment, contact a workshop.
Mark the middle of the back of the seat. Then attach the 4 large screws and the metal plate to the wood glue.
Using a special bit, drill a screw hole in the cross and the same one on the top of the base. Check if the screw rod can fit into them.
Fill the screw slots with putty. Let the composition dry.
Using sandpaper, lightly sand the surface of the structure.
Cover the garment with a stain. Leave to dry completely.
To make the chair last longer and have a finished look, apply 1-2 coats of varnish to the wood.

Now you can arrange your own loft corner on the balcony, kitchen, living area, etc.

In the 40s of the last century in the United States began to gain popularity architectural style loft. It originates in the industrial districts of New York, where many industrial premises have been abandoned by their owners due to rising land prices. Representatives of bohemians were the first to notice them and after the purchase they began to use abandoned factory buildings to create housing and place furniture. It turned out cheap and tasteful, which allowed the style to remain popular to this day. Now such arrangement of an apartment is very popular, and do-it-yourself loft-style furniture is perfect for both private houses and offices.

When creating loft-style furniture, materials are used that usually go to landfill when overhaul... This explains her low cost... Old pipes made of metal and roughly processed boards in skillful hands turn into gorgeous loft-style designer pieces. The only limitation in the choice of material is the general style of the house. Loft furniture should emphasize it, so you have to think about color range and the cumulative interior. Wood and metal will help the most used materials in the loft. Things made of concrete or roughly hewn stone act as decorative elements. There is no need to purchase noble materials like marble for decoration. Plastic is an undesirable raw material, because it does not correspond to the stylistic direction. The loft has its origins in industrial premises, therefore, the material should be similar to that used in the design of industrial buildings. However, it is not always possible to find deck boards or metal barrels. Then the thing can be artificially aged, giving it a casual look.

The easiest way to make loft-style sofas, beds, ottomans and tables for various purposes... To create the first two, you will need used varnished pallets. It will be enough to put pillows and a mattress on top. The bed frame can be metal constructions found, for example, at a local factory. If you have sufficient skill in working with metal, then they can be altered to your taste, covered with fabric. Deck planks will be custom and original choice as a base for a loft style bed. The sofa can also have a similar design, but also have its own characteristics. For example, metal barrels are suitable for the base. The top is carefully cut off, the surface is sanded, then the sofa is filled with a strong substance and laid soft pillows up.

Ottomans are made from pallets, metal or wooden barrels, industrial machinery, even old suitcases. Tables can also be made of anything, as long as there is enough imagination and skills. Everything will be used - from old boards and solid layers of wood to frames sewing machines... Even wooden cable spools can turn stylish coffee table.

What can be made

There is no loft-style furniture that cannot be made by yourself. Moreover, these can be designs of the most different sizes and destination.

Pallet bed

This option is increasingly becoming popular due to two factors - originality and low cost. Pallets can be purchased for 100-150 rubles, and the mattress will be the most expensive part of the structure. It is best to purchase pallets with EUR / EPAL markings. Thanks to their high quality, they will last longer. Often new or used pallets are wet. Therefore, you should first grind them. sandpaper and paint. You can keep the natural look by using wood impregnation, or you can experiment with color. The originality of a loft composition depends on the ability to find application for not new things. If the budget is limited, the pallet is made with your own hands from the boards, but there will be more trouble. In addition, these beds have one major drawback - the inconvenience when cleaning. However, it will not be so important for true connoisseurs of the loft.

For standard bed from pallets you will need:

three pallets 120x80 in size;
primer and paint for wood;
roller and brush for staining;
sander and sandpaper.

First you need to walk along wooden surface grinder, and those places where she did not reach, smooth out with sandpaper. Then the pallets are wiped with a damp cloth. This is followed by the processing of wood with a primer and paint. Two coats are applied if necessary. The pallets are then folded one by one to form the bed frame. In the end, it remains to put a mattress and pillows on top. There are more functional option with niches. To create such a bed, you will need eight pallets and an additional drill for wood. First, you need to remove the extra boards so that when overlapping, niches for the boxes are formed. The process is then repeated: cleaning grinder or sandpaper, wiping with a damp cloth, primer and paint. It is recommended to leave the trays to dry overnight. Photos of pallet loft beds can be found below.

Draft assembly

The basis of the future bed

Placement of pallets on the base

From above, the base is chipped soft cloth or carpet

Side table

Design standard table the loft style that is sold in the store is very simple - wooden table top on metal frame in the form of a parallelepiped. But such elementaryness hides a considerable price, so it is best to do such a thing with your own hands. This requires:

two fir boards measuring 250 * 15 centimeters;
three pine beams 250 * 5 centimeters;
30 x 7cm screws;
sander or sandpaper;
drill;
wood stain for dark walnut and ebony wood;
polyurethane varnish.

Before assembly, you can make drawings on your computer.

The process is as follows: first, the frame is assembled using screws. It is recommended that you pre-drill holes for fasteners in each corner. Then the boards are sanded and the table top is impregnated with "dark walnut". Table frame to give it metallic look processed in two layers " ebony". The tabletop is attached to the frame with twelve screws. Then the table is turned over and three screws are screwed into each board from the inside out.

Instruments

Fastening the legs for the legs

Attaching the legs

Bedside table

Probably the simplest piece of loft-style furniture is a bedside table. It can be made of metal racks or handles, but sometimes painted enough metal barrel... Sometimes, to please the industrial roots of the loft style, the role of a bedside table is played by two cinder blocks, placed together. The main thing is that the material makes one of the most expressive parts of the interior out of the simplest piece of furniture. In addition to originality, a bedside table can have many functions. To make it, you need pine planks, two pieces of pipe with a diameter of half an inch, four wheels for furniture:

first, the side parts of the cabinet are assembled. Small strips with pre-drilled holes are attached to each other with glue;
two holes are made on each of the boards. Before that, you should check them for coincidence in size - they must be the same;
two planks each are screwed to the middle and bottom shelf. In order for them to be the same, strips are attached to the middle;
the lower part is installed under the side bases using glue and euro screws;
the remaining strips are installed on the sidewalls from above. The upper shelf is assembled from three boards;
holes prepared in advance are filled with a special composition;
defects on the walls should be removed with sandpaper;
the bedside table is stained and left to dry. After that, one layer of varnish is applied;
when it dries, the wheels are attached to the screws with glue at the bottom of the tube.

Wooden pallets

Bedside table width

Finished frame for the frame

Grinding workpieces

Assembling the countertop

Installation of walls

Making a box

Ready box

Shelf making

Cutting a heart-shaped hole

Cupboard

The largest piece of furniture on this list. Wood and metal are best suited for making it. A great addition would be the use of two types of wood. The standard ones will be superfluous. decorative ornaments, especially in the form of flowers or ornaments. Loft - industrial style, and "tenderness" in the ornament will be inappropriate. If the cabinet has mirrors, then they should be decorated in a classic way or in the form of shards. Some décor is acceptable, but must be in line with an industrial focus. For example, doors made in the form of wooden shutters. Loft style wardrobes can be:

hull - they have a full-fledged frame, they are not particularly difficult to move;
built-in - they make the most practical use of space and do not contain walls. Perfect for small apartments;
semi-built - part of the frame, for example, a wall, is missing;
diagonal - well suited for dwellings with a large area;
trapezoidal - the side wall will be smaller than the other. The cabinet is turned by it to the doorway.

Sometimes you don't have to do it all over again. Normal old wardrobe made out with metal staples or rivets, which makes it look like steel doors at the factory. For this purpose, nails with decorative caps are well suited.

In addition to metal fixtures, painting and subsequent wrapping with canvas are suitable. In the photo, the loft closet is guaranteed to look like a passage on a warship. To give style features you don't have to do a complete rework, just add a few details. For example, from an old barn or an abandoned construction site, you can take wooden stairs, clean it and use it for tall cabinets.

The photographs show the above-described loft-style pieces of furniture. They will help you understand what this direction is. Particular attention should be paid to the description of the pallet, which can come in handy if the furniture elements for the loft are made on their own.

Built in

Wardrobe

There are many design styles decoration of premises. Sometimes, to implement an idea, many things are redone, and sometimes they are simply thrown away. To make their plans come true, people are ready to sacrifice the most expensive items of the former interior. Today we will talk about a very interesting style - Loft. It is quite possible to make furniture in the Loft style with your own hands. For this design, many available materials that can be found in every home - pipes, boards, are suitable. Such quite affordable things and finishing do not require a lot of money, time and effort. As for the decor, lighting and furniture, then investments are needed. Believe me, these costs are worth such a gorgeous result. Let's start our acquaintance with this style to find out, for example, how to make a Loft sofa with your own hands, and more.

Features of the Loft style

This style appeared in the 40s. He was reborn in New York, or more precisely, in Manhattan. The reason for his birth was the lack of affordable housing. That is why many people tried to arrange affordable dwellings with their own hands. We used absolutely different materials... As a result, quite cozy and comfortable rooms with minimal investment... If we take the current time, then to the above, you can add beautiful furniture and original lighting that will become a highlight in your luxury apartment.

Differences between the Loft style and other design designs:

The main feature of the Loft is its industrial orientation, the use of unusual materials and decorative elements.
To implement this style, metal or chrome pipes, beams, rough brickwork or concrete. All these elements do not purposefully mask, but, on the contrary, open up as much as possible.
The wall cladding is rough and not at all well-groomed. In this case, you can safely use textured plaster or putty to give the visual impression that you have not worked on the wall at all. To achieve this effect, many people buy quite expensive and very high quality finishing materials.
Two design ideas can easily coexist in a room - antique and modern items, furniture and accessories. For example, a stylish sofa bright color fits perfectly into the room where the antique coffee table or cabinet with glass inserts is located.
The use of damaged, scratched or worn furniture is very appropriate when decorating a room in the Loft style. Some people deliberately create such defects in order to recreate all the beauty and richness of their creative idea.
The most popular materials for Loft-style furniture are plastic, wood, textiles and leather. All interior items made from the above raw materials are large enough and sometimes very heavy. For example, the wider the vertical metal tube, countertop, seating area and closet shelves, the more the Loft style will be recreated.
An obligatory element of such design solution is the presence of various casters. They are present on shelves, on tables, even on dressers. It is advisable to use wheels on almost all possible locations... It is these strange elements that are inherent in the Loft style, where furniture at one time should be in a minimum amount, and at another - be modern and multifunctional. To achieve this perfect combination, it is better to entrust this difficult task to professionals.

Important! But you can try to make a unique filling for a unique interior yourself. We hope that our master class "" will help you cope with this difficult task.

The ceiling surface, like the walls, is made in a rather sloppy design, decorating it with dark shades (black, brown, gray). The ceiling is treated roughly, with visible defects, chips, bubbles and various blotches. Around the entire ceiling, you can add bulky metal pipes, other imitating designs to further enhance the impression of the uniqueness of the interior.
To decorate Loft-style floors, tiles are used like stone, laminate or porcelain stoneware in order to maximize the structure of the wooden board. Materials are very popular that can create the appearance of an untreated concrete floor. This includes the so-called self-leveling floors, which must be matte for this style. Sometimes as flooring put linoleum and other cladding options.
All objects in the room should be placed at the maximum distance from each other. One of the conditions for a Loft design is maximum free space.
This style can be complemented by original bright lamps on a long metal wire.
To highlight the kitchen area, it is appropriate to place a bar counter made of shaped pipes.

Important! Despite all the inaccuracy, democratic and unusual style, the most due attention is paid to accessories and decor details. The presence of black and white paintings, prints on the walls, photo collages, vases and other decoration elements are integral and very important components of the Loft style.

DIY Loft table

Wooden furniture in this style can be made from almost any material - unnecessary planks or any old table or chest of drawers. Today we will look at several detailed master classes on making a coffee table.

The first way

For work we need the following materials and tools:

Wooden circle for the top and bottom of the table - 2 pcs.
Wooden spool or large barrel.
Saw or circular.
Metal wheels.
Coarse sandpaper.
Self-tapping screws.
Schurovert.
Screwdriver.

Getting started:

We make two wooden circles from the boards (the diameter is at your discretion). We put the boards close to each other and using a circular cut them to the size we need, thereby creating the cover of our future table. We do the same manipulations with the second exactly the same part (for the lower stop).
We connect the boards to each other with the help of small strips (the quantity is optional).
Using a screwdriver, we screw 4 wheels to the bottom of the previously prepared round wooden cover.
Grind the cylindrical coil with coarse-grained emery paper. This part will serve as a support for our coffee table.
We fasten the upper part of the lid to the base with self-tapping screws.

That's all the work! The lower part of such a table can serve as a stand for books.

Important! Interior decoration is a delicate matter. Designing your living space, you want to fill it with not only functional, but beautiful and unusual pieces of furniture. Therefore, having decided to make something unique for your home, start embodying ideas after reading our selection.

Second way

Let's consider another manufacturing option. wooden table in the Loft style. Anyone can make it, the main thing is to pick up everything you need for work, namely:

Construction pallets.
Patina.
Wheels.
Self-tapping screws.
Finest grit sandpaper.

Step-by-step algorithm of actions:

We disassemble a wooden pallet.
We take out all the available nails from it.
We connect two boxes with self-tapping screws.
With small wooden planks close up the cracks.
We cover the surface of the pallets with acrylic varnish. It is advisable to apply 1-2 coats of the make coat. Otherwise, the varnish will flow, which will entail ugly drips.
Apply patina to the wheels to achieve the effect of “aging”.
We rub them with fine-grained sandpaper.
We fasten the wheels at the four corners of the pallet.
The new table is ready to fulfill its intended purpose. So we got two items in one - a table and shelves in the Loft style with our own hands. In such large and convenient recesses, you can store not only magazines, but also necessary things.

Important! Loft-style furniture can be decorated a little by first sanding it and painting it in White color without using painting and patterns.

DIY Loft bed

This method is very similar to the previous one in the order of assembling pallets, but it has its own differences and an additional item - a mattress. Yes, it didn't seem to you, you can make a bed yourself from this completely available material... Having decorated it, you will get not only a comfortable sleeping place, but also very practical furniture.

Important! In order for the bed to become not just a place to sleep, but also, in a way, a point of comfort, inspiration and relaxation, it is necessary for it to be chosen the right accessories... Therefore, before buying or manufacturing your nest, check out our materials from our blogs:

What you need to work:

Wooden pallets 6-12 pieces.
Sander.
Screwdriver or drill.
Hammer.
Hacksaw or electric jigsaw.
Self-tapping screws or nails.
Dye.
Brushes of different widths.
Brush with soft bristles.
Roulette.
Pencil.
An orthopedic mattress of a suitable size.

There is nothing difficult in the manufacture of such furniture - each master has his own personal secrets that will make such a product unique and inimitable. But since the pallets are technical material, then in the manufacture of furniture, you must adhere to a few simple rules:

They need to be sanded well so as not to leave wood knots. For our case, this is extremely important, since the convenience of our location during rest and sleep depends on the quality of the processing of the wooden surface.
We deal with natural wood, therefore, it is better to treat the surface of the pallets with a special anti-fungal impregnation. So we will protect the bed from all kinds of pests that will harm not only the material, but also its direct user.

Important! Optimal size a double sofa made of pallets is considered 240 by 240 cm. This parameter determines the format of the pallets themselves, which are three pallets in two dense rows.

Do-it-yourself step-by-step process for making a Loft-style bed:

We prepare our pallets. Their number may be different - it all depends on the height of the desired bed. Therefore, the higher the berth, the more pallets will be required. Using a soft brush, we clean them of debris.
We grind and treat the entire surface of wooden pallets with an antiseptic, including corners and hard-to-reach places.
We paint each pallet separately (the choice of color is optional).
After the pallet is completely dry, we cover it with varnish. We are waiting for the coating to dry again.
We put one pallet on the floor first, then the second, fixing them together with self-tapping screws. We do the same with the second row of the bed.
To make a headboard for our sleeping place, place two pallets vertically at the top of the bed.
We put the mattress on top homemade furniture and enjoy the result of the work done.

Important! If you want to make a durable Loft sofa with your own hands, then it is advisable to use only new ones. wooden pallets, and not those that have transported for many years various materials and equipment.

Other furniture options in the Loft style

We've covered ways to make a Loft-style wooden table and bed, but that's not the whole list. If you add a profile pipe to the pallets, then you can do a lot more garden furniture do it yourself. This will be a great start for a newbie who has decided to become familiar with welding. There is nothing complicated in the work, the main thing is that the pipes just need to be fixed with the base material. For Loft-style furniture, profile pipes serve as a support. They replace the legs of a chair, bench and so on. In a word, this material will be very useful when working on the creation of an interior in the Loft style.

The list of furniture, the design of which includes a profile pipe:

Shop.
Armchair.
Chair.
Cupboard.
Bar counter.
Sofa.

It often happens that the "skeleton" of the structure is assembled from the profile pipes, and then additional soft furniture elements are added. For example, a do-it-yourself Loft-style rack is assembled according to exactly the same scheme. These include wooden chair: first, the furniture frame is made from together welded shaped pipes, and at the end of the work, the seat is placed.

Important! Furniture from shaped pipe very reliable and durable due to the high strength of the material itself. Therefore, if you decide to start making furniture on your own, then pay Special attention on this multifunctional item. Moreover, we will be happy to tell you how to make "".