In this article, you will learn:

• Why repair the facade of a private house
• How overhaul facade differs from cosmetic
• What materials are used for finishing the facades of private houses
• How to insulate the facade of a private house yourself
• Is it possible to repair the facade of the house yourself

What do you pay attention to first of all when looking at a cottage or private house? That's right, on the facade. Over time, any building materials wear out, even the most durable, and the building can look unpresentable. Regular renovation of the facade of a private house is required during its operation in order to maintain an attractive appearance... At the same time, the building can be insulated to reduce heat loss.

When the facade of a private house needs renovation

The main reasons due to which there is a need to repair the facade:

Types of repair of facades of a private house

What the technology depends on renovation works? This is greatly influenced by the material from which the walls are made, and labor intensity also matters. construction works... Such repairs are subdivided into cosmetic and major.

• Redecorating

What is this renovation of the facade of a private house? Often the facade cladding itself does not change, but simply refreshes, acquiring the lost attractiveness.

For this there are different ways decorative finishing, it all depends on the wishes of the owners.

Redecorating the facade of a private house is recommended to be carried out regularly, about once every 5 years.

• Overhaul

Such facade renovation must be balanced. It is necessary to make an informed decision about the need to replace some elements of the facade.

It all depends on the state of the facade. Major repairs must be carried out every 15-25 years.

The need for a major overhaul of the facade of a private house depends on the following reasons:

1. The building needs to be restored.
2. A residential building needs to be converted into a public or commercial building.
3. At least 1/3 of the entire area of ​​the facade was damaged.
4. Redevelopment is required or you need to demolish the wall, make an extension.
5. It is necessary to equip or redo the ventilation.

Types of materials for repairing the facade of a private house

What do you need to keep in mind when choosing a material for finishing? It doesn't matter what material the house is built from, this is a key moment in creating an exterior design.

If the building is made of wood, experts recommend installing ventilation between the wall and the facade cladding.

The decoration of the facades of private houses can be carried out in two ways:

• dry, in this case, the facing material is attached to the walls using self-tapping screws, nails and other fasteners. It is very convenient, you will not be affected by weather conditions. Minus - the design will not work out monolithic;
• wet- the surface is finished with special mixtures.

Between the cladding and outside wall there may be a gap. According to this principle, facades are classified as follows:

1. unventilated;
2. ventilated.

An unventilated facade of a private house is obtained when the finishing material is attached directly to the outer surfaces of the walls. Facades are often called wet and ventilated, this is not quite a correct designation.

When arranging a ventilated facade of a private house, a gap is left between the wall and decorative coating... This facilitates the removal of condensation to the outside, while the walls breathe. Such a facade protects the building from all kinds of atmospheric influences.

There is such a variety of building materials on the market today that it is difficult for buyers to decide when they want to renovate the façade of their home. There are the following main differences between finishing materials:

• appearance;
• properties;
• life time;
• how they correspond to our climate.

Consider the main types of materials for the repair of facades of private houses.

Plaster

Such a mixture will hide all surface defects during plastering, the facade of a private house after repair will be smooth and beautiful. There are two types of plaster mixes on the market:

• gypsum plaster (expensive);
• ordinary cement.

This coating can be applied to any substrate:

1. concrete;
2. made of wood;
3. brick.

Plus plaster is a budget option.

Minus - plastering the surface is not easy, you need to have a special skill. If you want to do this yourself, keep in mind that you will need a lot of time for finishing.

Siding

This material is suitable for repairing any facade of a private house:

1. brick;
2. from concrete;
3. wood.

The installation of siding sheets begins from the top, moving down. The building faced with this decorative material will look neat and personable.

If you want to use siding for a spectacular renovation brick facade your private house, it is advisable to pre-plaster the walls. The solution will level the surface and serve as additional insulation.

Decorative tiles

Not good practical material, the tile can hardly bear negative temperature, does not love bright sun... It will last for a maximum of 1-2 seasons, after which it looks unpresentable.

To install it, it is desirable that the weather was without rain, but heat is also not needed.

When repairing the facade of a private house using tiles, consider this nuance - it will take a long time for the masonry to dry completely.

Porcelain stoneware

it beautiful material but not very durable. With temperature drops, porcelain stoneware becomes brittle and prone to destruction.

Such material is suitable for repairing the facade of a private house only if the surface is protected from atmospheric influences.

It makes sense to use porcelain stoneware when decorating terraces and gazebos, they will look very stylish.

What else can you decorate the facade of a private house?

Natural stone or its artificial analogue

No finishing material can compete with natural stone. It is extremely strong and durable, its decorative effect is also beyond doubt.

But this natural stone is very expensive, so it is more often used in small quantities for decoration. The owners of a private house during the renovation of the facade prefer to combine this material with other finishes. They often replace natural stone with an artificial one. The cost of such decorative stone much lower, and the characteristics are almost the same as those of natural material.

The disadvantages of a stone facade are the high price and significant weight. The cost of artificial material is also quite high, although it is much cheaper than natural.

Wood siding

The material for the manufacture of such panels is dried in a special way and processed using antiseptics. As a rule, it is a board or timber made of wood.

Wooden siding has a lot of disadvantages - it is expensive and short-lived. Such a coating needs protection from decay, and it is also fire hazardous. But this one is incredibly beautiful natural material still continues to be popular with owners of private houses when renovating facades. Recently, siding from a mixture of wood and cellulose, with improved characteristics, has appeared on the market. But it is also not very durable.

Facade finishing with cassettes

Previously, metal cassette cladding was used for decoration public buildings, recently it has been increasingly used in the repair of facades of private houses. What is facade cassette? It is metal decorative panel rectangular or square shape, with a special polymer-based coating.

Metal cassettes are used not only for decorating old houses, but also for new buildings. They are fixed to the frame during the construction of the building. But the price of such a coating is considerable.

Renovating the facade of a private house is not an easy, quick, but incredibly exciting procedure. Use modern materials of high quality for decoration, adhere to the installation rules and in this case, you are guaranteed success!

Redecorating the facade of a private house

How often should you do cosmetic repairs to the facade of a private house? It is advisable to hold such an event every 5 years. It is necessary not only to replace the cladding of the building, but also to eliminate surface defects - cracks and chips - as a preventive measure. Then you will not have to carry out major repairs in the near future. The new decorative facade cladding will reliably protect it.

Operating procedure:

• first inspect the facade to determine the amount of destruction and the scale of the work;
• elimination of the identified surface imperfections - potholes, cracks and stains;
• surface treatment with anti-wetting agents;
• the cleaned walls are primed;
• facade cladding with decorative material.

1. Repair of the facade, which is finished with plaster

Plaster. This material is often used to repair the facades of private houses. This versatile finish is available to everyone. It is not difficult to carry out technologically, although the process requires effort. The plaster is lightweight and has a rich color palette.

The downside is that such cladding will have to be frequently updated, the plaster quickly deteriorates under the influence of weather conditions.

What you need to consider when repairing the facade of a private house made of plaster:

• do not apply too thick layer of material to the wall, the permissible thickness is no more than 3 centimeters;
• gypsum-based mixture is not suitable for concrete wall;
• 4-5 hours after plastering, grout should be carried out.

When the plaster coating is destroyed by more than a third, the entire cladding should be overhauled. Old finish completely removed and replaced with a new one.

2. Renovation of facades covered with porcelain stoneware tiles

Porcelain stoneware is a very hygroscopic finishing material. This tile is made from a mixture of several types of clay with natural minerals. In what cases is the facade of a private house made of porcelain stoneware renovated:

• there was a destruction of the coating under the influence of atmospheric influences;
• façade finish is incorrect.

In the first case, it is enough to replace the parts that have become unusable. In the second, you will have to dismantle the cladding and install a new one according to the technology.

Book a discount on renovations
up to 10% for 15 days!

Enter your room and we will book
for you a personal discount

3. Restoration of fiber cement slabs

What is fiber cement? it modern material in construction, which is made from slabs based on cement, cellulose and mineral components. This eco-friendly material durable, flexible and lightweight.

Fiber cement slabs have special properties - they allow the walls to breathe. Fungi, mold or rot are not terrible for such material.

Repair of the facade of a private house made of fiber cement slabs includes the restoration of the external appearance of the building - changing parts that have become unusable, washing the cladding or painting it.

4. Renovation of the facade from siding

With siding, the sequence of actions is slightly different. Examine the facade for damage. If not, wash the surface thoroughly enough plain water... You can use mild detergents. If defects are found that can lead to the destruction of the cladding, it is better to replace such a panel when repairing the facade of a private house.

The only caveat- it is important to choose the right shade of the material correctly. Color may fade when exposed to sun rays... Take this question seriously. The main thing is that the difference in color between the siding panels is not conspicuous.

To replace a damaged part, you will have to disassemble the entire structure up to this section. Look at the condition of the insulation, it may also need to be changed. Then you install a new decorative element and reassemble the siding cladding.

5. Redecoration of a tiled facade

The tile covering is cleaned in the same way as the siding. detergent or water. The difference is that the seams can break here. In this case, they are sealed with a sealant, even a small gap in the facade cladding can lead to significant heat leakage.

How does this happen? Moisture enters the hole and, after freezing in the cold, it expands, increasing the gap. This happens at each temperature jump, as a result, the integrity of the coating is violated and it breaks.

Overhaul of the facade of a private house: stages of work

Does the facade become unusable and the structure looks dilapidated and unsightly? Overhaul of the coating is required! How to repair the facade of a private house with your own hands cheaply and beautifully? The various photos presented in the article will help you with this. The work can be organized as follows:

• Repair start

Examine the facade carefully. The task is to detect possible damage to the cladding, faults, cracks and destruction. Defects are not always visually identified, sometimes they can only be detected by tapping the surface with a hammer.

Why do cracks appear on the facade of a private house? This may be due to uneven shrinkage of the building. It is necessary to study the condition of the soil, you may have to first make a major overhaul of the foundation. And only then begin the restoration of the facade. In general, get ready for global work.

Precipitation, wind and sun are your main enemies. Moisture can seriously destroy the cladding if it gets into microcracks and starts to freeze and thaw there, expanding and narrowing in turn. This will ultimately lead to a violation of the integrity of the coating.

A hurricane can derail hinged structure which is not securely fastened. Individual bricks can fall out of the brick cladding if the joints are depressurized. Or you may want to insulate the walls of the house.

After inspecting the facade of a private house and assessing the repair that needs to be carried out, draw up detailed plan action. This is necessary for a high-quality renovation of the building, so as not to miss anything during the renovation process.

• Stages of overhaul of the facade

What does the overhaul of the facade of a private house consist of? There are three stages - preparatory work, restoration procedures and facade cladding again.

First. First, the surfaces are prepared for repair. The previous cladding is removed and large defects are repaired.

The next stage. The surface must be restored - with the help of plaster or a primer, all irregularities are masked and leveled.

Third stage has its own subtleties. How is this expressed?

Often, during the renovation of the facade, the owners of private houses wish to insulate the building along with the decorative finishing. Then facing works will include the installation of insulation, which should be correctly selected.

In the event that a ventilated facade is equipped, its installation is carried out in the following order:

1. a metal frame is attached to the wall of the house using anchors;
2. the surface is insulated with thermal insulation;
3. cladding is installed on top for decoration and protection of the structure. It is necessary to leave a gap between it and the thermal insulation of about 20-50 millimeters for ventilation.

What will you end up with? This decorative cladding with an air gap will also protect the structure from adverse external factors. Many people choose such a ventilated system for overhauling the facade of their private house. This beautiful protective shell will save you heating costs for your building.

Such ventilated systems for facades - "Marmorok" and "Scanrok" are especially popular today. By installing them, you will forget about repairing the facade almost forever - they will serve you for at least 50 years! But they are only suitable for new buildings. If your home is not, it is better to stick with the wet version. The technological process of its installation is slightly different:

1. insulation is glued to the facade - mineral wool or foam;
2. a grid for reinforcement is installed;
3. the surface is plastered, putty and primed;
4. then everything is faced with bricks, tiles or stone. You can paint the top coat with facade paint or other water-repellent agent.

Overhaul of the facade of a private house is a difficult process, it is better to entrust it to competent professionals. Such reconstruction will restore the cladding of the building and return it to its attractive appearance. Or maybe even completely change it, if the owners want it.

The main types of work during overhaul:

• it is necessary to calculate the bearing characteristics of the foundation and basement - whether they can withstand the main load;
• the masonry of the walls is being restored or strengthened;
• the surface of the house is insulated, if this has not been done earlier;
• after installation decorative cladding seams are rubbed to give the facade a neat look;
• final cleaning of surfaces from contamination.

Insulation of a private house with expanded polystyrene

Currently no better material for warming houses than expanded polystyrene. This is obvious after analyzing the building materials market. Such insulation has an ideal price-quality ratio.

The flammability of extruded polystyrene foam is weak, it consists of components that are prone to self-extinguishing a couple of seconds after arson.

1. Preparation for work

The facade of a private house is cleaned with a brush or broom from dirt and dust. Surface stains can be removed with thinner or benzine.

All surface defects are sealed with a cement-sand-based mortar or putty.

2. Wall priming and installation of suspensions

The walls are covered with several coats of primer with deep penetration... This can be done with a roller, not just with a brush. An ordinary fishing line or nylon thread is used as suspensions. The hangers are hung every 60–70 cm in height.

These elements will show where you need to cut the insulation, and where to add glue. After installation, the surface will be perfectly flat, suitable for plastering. You can easily install any decorative coating on it.

3. Laying polystyrene foam during repair

Dilute the adhesive according to the manufacturer's instructions. Then apply the adhesive mortar with a spatula to the back of the expanded polystyrene panel. Then, with effort, you press it against the surface of the wall.

Installation should start from the upper section of the wall, moving downward. The panels must be tightly joined together to form a monolithic coating. The quality of the house insulation will depend on this. It is better to close all the gaps formed immediately. polyurethane foam or polyurethane.

Fasten the expanded polystyrene with dowels. Attachment points are each panel corner and center.

If the facades of wooden private houses are insulated with expanded polystyrene, it is recommended to lay a layer of vapor barrier between the insulation and the wood surface, securing it with a stapler.

4. Plastering and finishing works

It is advisable to carry out plastering work for houses with insulation using fiberglass reinforcing mesh. For walls, a material with a density of 150 g / m 2 is needed, and for decorative details on the facade, 80–90 g / m 2 will suffice.

Required thickness plasters based on polymer components for leveling the surface - about 0.5 cm.

For decorative finishing of the facade of a private house, you can choose any material you wish.

How to repair the facade of a private house yourself

What is the best way to proceed if the facade of your private house needs a simple repair, no fancy? Suppose you need to add cladding or apply another coat of finishing material? You can do it yourself.

But first, draw up a work plan that you will need to create an estimate and purchase materials for repairs. You can do such a project yourself or contact the specialists so that they choose the right necessary materials to cover.

You will repair the facade of a private house with your own hands. It will cost you cheap, but it will turn out beautifully, as in the photo. You will need the most common building materials for this:

• metal or plastic panels for siding;
• plaster mix;
• composite panels, decorative fake diamond, porcelain stoneware, etc.

When there are traces of mold or cracks on the facade of a private house, do not hesitate to choose plaster as a finish. This material is different, not only based on cement, there are also its gypsum varieties.

1. Free the facade from the previous coating using a metal brush or sandpaper... Remove all dust, dirt and prime the wall for the installation of a new coating. In humid climates, additional surface treatment with antibacterial agents is recommended.
2. It is advisable to carry out plastering using a reinforcing mesh. Before that, thermal insulation should be installed to insulate the facade. The mesh is laid directly on the plaster. This method is suitable for any surfaces - brick, aerated concrete, etc.
3. Topcoat - decorative plaster... She happens different color and textures - matte and glossy, smooth and abrasive, white and colored, etc.

Often, a private house needs painting after facade repairs. If you wish, you can choose any color for the renovated building - white, brown, beige, brick, etc.

The most common, affordable and simple type of building facade repair is siding. Plastering is a very time-consuming process that requires certain skills. A perfectly flat surface is not as easy to achieve as it seems. Even beginners can handle the installation of siding sheets.

• First, you need to install the siding frame on the wall. It consists of metal or wood profiles that are fixed to the surface in increments of 40–80 centimeters.
• Then thermal insulation is laid - foam or mineral wool. A vapor barrier is laid on top; plastic dowels are used to fix it.
• To install the siding, start from the bottom, from the basement, gradually moving towards the roof. If your design provides for ventilation, consider how the water drain from the roof will be diverted.

The main advantage of such a renovation of the facade of a private house is the ease of installation. You will need few tools, only a hacksaw for trimming siding, a level, a screwdriver and a hammer drill.

Facade decoration: 20 interesting options

If you decide to build a house, think about its facade. It has great value how the structure will look. Take this seriously, building cladding isn't just for decoration. It also performs a protective function.

Facade panels

Decorative panels are a very popular material for renovating the facade of a private house. Its cost is low, and the building immediately takes on a respectable look. Typically aluminum panels, composite panels or trendy siding are used for this.

All these varieties finishing panels have the same scheme of fastening to the facade. There are various types of such coverage, with the most different textures that can imitate any natural material.

Facade plastering

Nowadays, repairing the facade of a private house with decorative plaster does not lose its relevance. What are the features of this finishing material:

• low price;
• a variety of colors, you can choose any shade of plaster for coating, painting it in the desired color;
• the help of professional craftsmen is not needed, you can easily do this work with your own hands.

Beautiful and modern decoration of facades. Photo

Today construction markets offer buyers a variety of materials for the repair of facades of private houses. The range of prices is significant - from budget options to very expensive, ranging from classic style to modern. A choice for every taste and budget.

To cooperate with the "My repair" Company is reliable and prestigious. The specialists working here are professionals of the highest level. The company "My Repair" works throughout Moscow and the Moscow region.

Wet facade - facade finishing technology using several layers of materials (thermal insulation, hard layer, decorative plaster). At the heart of the technology wet facade- use of construction and adhesive mixtures... This technology for decorating walls and facades of buildings is widely used both in the commercial sector and in the residential sector. Suitable for different types houses and wall materials, looks presentable, easy to maintain.

1. Thermal insulation (facade insulation).
   The first layer of the wet facade is thermal insulation (slabs made of mineral wool or penoplex), which is attached to the wall material with a polymer-cement mortar. The solution reliably glues the insulation to the rough walls.
2. Base material (hard layer).
   The second layer is a polymer-cement mortar together with a reinforcing mesh. This combination of materials simultaneously protects the thermal insulation material and serves as the basis for finishing walls.
3. Decorative coating (plaster).
   The third layer is decorative plaster or special paint. A rich selection of textures and colors opens up great opportunities for decorative design facade of the house.

Advantages of wet facade technology:

• Low price (in comparison with other options for capital finishing of the facade);
• Minimum load on load-bearing walls(due to light weight materials);
• A wide range of options for decorative finishes and textures (implementation of any design ideas);
• Possibility of painting in any color or various color combinations;
• Excellent compatibility of technology with elements of decoration and lighting of facades.

The ventilated facade is modern technology facade renovation and exterior decoration walls using a frame from a system of profiles and facing materials(porcelain stoneware or composite panels). The supporting structure in the form of a frame provides an even and rigid fastening of materials at the required distance for free air circulation.

• 
  Heat-insulating material can also be used to insulate the house (mineral wool or expanded polystyrene) with a moisture-proof film.
• 
  The design is based on Basic structure- a universal subsystem of profiles and components specially designed for fast and durable cladding any type of buildings and structures. Allows you to quickly and easily prepare walls for further cladding.
• 
  The air gap between the cladding and load-bearing wall air circulates freely, which protects the structure from moisture and condensation.
• Facing material (porcelain stoneware or aluminum composite material).
  As a finishing material, special composite panels or porcelain stoneware tiles are used. Today, many manufacturers of finishing materials provide a wide range of colors and textures, which allows you to implement a variety of ideas.

The main advantages of hinged ventilated facades:

• Possibility of quick installation, regardless of the season;
• The versatility of the design and material allows the use of ventilation facades technology for cladding all types of buildings and structures, as well as various architectural forms and elements;
• Durability of cladding, support system and components (average service life - 50 years);
• Large range of colors and hundreds of options for imitating natural materials;
• Convenient operation, maintenance and repair in case of damage;
• Heat and sound insulation, no overheating of walls and removal of the "point of condensation".

Facade plastering is a renovation using facade plaster, carrying out work on preparation and plastering outer walls building. Differs in accessibility, simplicity and speed of implementation of repair work. Depending on the material of the walls, the optimal type plaster.

Before plastering the facade, you must first prepare the walls - clean and prime the surface with a primer. The plaster is applied in 3 layers - base, main and finishing. For optimal adhesion of the plaster, a reinforcing metal mesh is attached to the walls or insulation.

The plaster solution is applied using a special pneumatic bucket or manually. Next, the solution is leveled along special guides. The next layer of plaster creates adhesion to the finish. The finishing layer is rubbed or decorated with a relief (pattern).

Types of plaster for facade finishing:

• Acrylic (based on acrylic polymer resins with low vapor permeability);
• Mineral (based on quartz or marble chips);
• Silicate (based on " liquid glass»- solution of sodium and potassium silicates);
• Cement (cement is used as a base);
• Silicone (based on silicone resins).

Advantages of decorative plaster:

• Low cost, ease of implementation of work and lightness of materials;
• Optimum material quality and strength level;
• Heat and sound insulation, moisture protection, resistance to weather conditions and temperature changes;
• A wide range of colors and textures for painting and decoration;
• Perfectly combined with decorative elements for external walls and facades.

Siding finishing involves outer cladding walls of the building with panels. This method of finishing has become widespread due to its reasonable price, combined with the simplicity and quick implementation of installation. Siding is used for finishing all types of residential and commercial buildings.

Types of siding (panel materials):

• Wooden (wood-polymer).
  For exterior decoration the walls are siding made of wood-polymer materials - a mixture of wood fibers and plastic. Service life - from 15 years, easy to maintain - no need to tint, soak, varnish. The material does not absorb moisture and is not flammable.
• Vinyl (made of PVC plastic).
  Vinyl siding is the most common type of siding due to its low cost combined with wide choice colors, as well as durability and ease of installation, operation and cleaning. The material is suitable for all types of buildings and climatic conditions.
• Metal (galvanized steel).
  Metal siding is most commonly used for cladding commercial and industrial use but also suitable for residential buildings.
• Fiber cement (made of cement with the addition of cellulose).
  Non-flammable, strong and durable material with increased resistance to moisture, mold and mildew. It is mainly used for commercial and industrial buildings.

The main advantages of siding facades:

• Minimum terms for installation, regardless of the season (preferably from +5);
• Universal material and installation system - suitable for finishing all types of buildings;
• A wide selection of colors and types of material (many shades and textures);
• Easy to operate, maintain and repair;
• Protection of walls from moisture, temperature fluctuations and condensate drainage.

Facing the facade with clinker tiles or bricks is a premium option for finishing the facade with imitation of brick or stone. The material is based on natural clay, fired using a special technology. Clinker tiles - affordable option cladding "like a brick", both external and interior walls building.

• Thermal insulation (wall insulation).
  Thermal insulation material (mineral wool or polystyrene) with a moisture / windproof film is used as house insulation.
• Subsystem (steel or aluminum frame with accessories).
  Construction of profiles and accessories specially designed for clinker tiles. The elements of the subsystem make it possible to implement the finishing process quickly and efficiently.
• Air gap (ventilation).
  A special distance between the cladding and the walls provides the necessary air circulation to protect against fungus, moisture and condensation.
• Facing material (clinker tiles or bricks).
  Clinker tiles are made from clay and sand, which are pressed, molded and fired at temperatures over 1200 degrees. Desired color clinker tiles achieved by different temperatures firing, so each batch of tiles is individual and may slightly differ in shade.

Possibilities of clinker facade technology

Insulation of the base walls of a building is a set of works for the preparation and installation of a heat-insulating layer. At the moment, there are two main options for insulation for external decoration - mineral wool slabs or expanded polystyrene.

The technology of insulating walls from the outside is correct, as with practical (saving useful area), and the technical side (protection of walls and removal of the point of formation of condensate). Base walls are prepared and primed, then using adhesive solution insulation is mounted and additionally reinforced with dowels.

Mineral wool slabs
Basalt mineral wool is an inexpensive and effective way to insulate any type of building. The mineral wool layer must be protected with steam and waterproofing. Insulation with this material is ideal for wooden houses and also works well with wet façade technology.

Styrofoam (expanded polystyrene, penoplex)
Polyfoam is an advantageous, very lightweight and easy-to-install material that also has good sound insulation. However, the foam does not allow air and steam to pass through, which requires equipping the house with a ventilation system. Also, the foam requires reliable waterproofing since exposed to moisture. The use of foam plastic is recommended in combination with ventilated facade technology.

The main advantages of facade insulation:

• Increased energy efficiency, reduced heat loss and heating costs;
• Universal materials - suitable for thermal insulation of any buildings;
• Protection of walls from moisture, temperature fluctuations, external influences and the removal of the "dew point".

Timely repair of the facade of the cottage allows you to prevent the process of destruction of the outer walls of the building, to increase thermal insulation characteristics and give it aesthetic appeal. But, it is very difficult to achieve such a result on your own, since in order to perform high-quality repair work, you need to have special knowledge and skills.

Major and cosmetic repairs

Given the nature and area of ​​damage to the walls, there are two types of repairs to the facade of a private house:

• cosmetic. Produced when minor cracks appear and includes restoration upper layers or sections of the facade decoration, without interfering with the structure and texture of the external walls of the building;
• capital. Designed to repair damage, the total area of ​​which is at least 30% of the entire facade. In addition to sealing and sealing the seams, during the overhaul, hydrophobization of the walls, replacement of windows, etc. can be carried out.

Regular conduct cosmetic repair will avoid an increase in the area of ​​damage to the walls and postpone the need for major repairs.

The cost of repairing the facade of a private house

How is a facade renovated?

Renovation of the facade of a private house includes 3 main stages:

• Preparatory. At this stage, remove the old facade finish and clean the surface of the walls.
• Recovery. Includes wall leveling and crack filling work. Previously, the cracks are expanded and cleaned of dust, after which they proceed to the priming of the working surface of the facade. If necessary, the walls are plastered.
• Finishing, on which the facade is clad with finishing materials. The most affordable price is wall painting. To the most expensive options includes tiling or stone finishing.

At the request of the customer, ebb and flow drains located on the walls can be repaired country house, as well as during the repair carried out additional work for facade insulation, replacement of cornices.

Company offer

Want to quality repair facade of a private house in Moscow for short time and at an affordable price? Then contact the specialists of the Alfacom company. We will perform work of any complexity quickly and with guaranteed impeccable quality. Our company is ready to provide a service of both cosmetic and major repairs of the facades of cottages of various heights using only modern, safe materials and technologies.

The beauty and attractiveness of a private house largely depends on the aesthetic qualities of the facade. Renovation of the facade of a private house allows you not only to make your home more attractive, but also to improve its heat and sound insulation properties. If the house is insulated, the energy and heating costs are lower, in addition, the beautiful facade attracts the attention of others, causing envious glances.

In addition to its attractive appearance, the facade of the building performs a number of equally important functions:

• House insulation
• Protection against moisture and moisture
• Improving soundproofing qualities

A well-designed façade combines aesthetic appeal with practical qualities. The facade of the house consists of a basement - the lower protruding part of the foundation and a cornice that connects all the walls and the roof between the owl. If you need urgent repair facade of a private house, but you do not know where to start and what material to choose, contact the company's specialists for a free consultation.

The cost of repairing the facade of a private house in Moscow

The estimate for the repair of the facade for many is a determining factor when choosing a contractor, but in addition to the cost of repair, it is also important to take into account the quality of work and the cost of materials. The cost of repairing the facade of a private house consists of several components:

• Dismantling the old coating
• Cost of materials and consumables
• Installation services
• Delivery of materials
• Other services (Removal of construction waste, unloading of material, covering of windows, air conditioners, entrance groups film)

Therefore, when choosing a contractor, be sure to find out what is included in the price, since many unscrupulous companies, wanting to "lure" the customer, do not announce the cost of additional services, as a result, the price for facade repairs is low, and Additional services 2-3 times higher than that of other facades.

The company "Stroy 911" provides all types of repairs to the facade of a private house on low prices in Moscow and the Moscow region.

• Cosmetic
• Capital
• Emergency
• Current
• Warming and repair
• Plastering works

Why is it profitable to work with dreams?

• We have own production, therefore, we manufacture all facade structures ourselves, and do not turn to third-party contractors.
• Our own warehouse of materials allows you to repair the facade of the house at any time, we buy all facade and roofing materials from direct manufacturers, so you do not overpay for the material.
• Our own transport department ensures uninterrupted delivery of materials and workers to the site.
• We draw up a free "transparent" estimate for the renovation of the facade without additional gimmicks and surcharges.

Stages of repairing the facade of a private house

Facade works at different objects differ in the complexity of execution, the types of materials used and the area of ​​work - all this can affect the final cost. Let's figure out what kind of work should be done at one stage or another of the work.

Preparatory work

Building regulations determine the frequency of facade work: Maintenance(cosmetic) once every 5 years, major overhaul of the facade of a private house once every 10 years. Depending on the type of facade, a routing, according to which certain works are carried out and the necessary materials are selected.

If you bought a house recently and do not know when was the last time facade work You can find out by the nature of the condition of the plaster, if the area of ​​its collapse or departure from the base of the wall is more than 30%, it is worth doing a major overhaul, if less, it is enough to eliminate the resulting defects - this is a cosmetic repair.

The preparatory work for the repair of the facade of a private house or summer house includes the following activities:

• Removing the old covering (for example, if the house was covered with siding or wooden clapboard and requires its complete replacement)
• cleaning walls from dust and debris
• installation or replacement of a hydro and thermal insulation layer
• strengthening the foundation
• surface preparation (application of a reinforcing layer, serifs, erection frame structures, equipping the walls with fixings, etc.)
• padding
• elimination of cracks and sealing of seams

The main stage

Depending on the type of facade, various manipulations and a set of works can be performed, let's focus on the most common types of materials for the facades of summer cottages and private houses.

Selection of material

Plaster- one of the most common types of facade decoration for private houses and municipal buildings. Possibility of applying a plaster layer to the insulation layer and big choice textures and colors make given view facade decoration the most demanded. "Wall coat" is classified according to the dominant material in its composition: cement, gypsum, silicone, acrylic, mineral.

Each type of coating has its pros and cons, be sure to read the manufacturer's instructions and recommendations for use. Many European facade materials do not adapt well to the harsh weather conditions of our country, therefore, after a year or two, cracks and delamination from the base may form on the perfectly executed facade of the house.

Siding- a relatively new material for our country, but already so beloved by our citizens, because it has a lot positive qualities: inexpensive cost, large color variety, ease of installation. Repair of a private house with siding consists in installing guides and laying siding, installation of an insulating layer is possible.

Brick for repair and facade cladding can be clinker, decorative, clay, silicate. Brick repair facade wall requires certain skills. Brick helps to improve the thermal insulation of the house, allows you to create designer and stylish exteriors.

A natural stone pleasure is not cheap, but its durability and environmental friendliness are worth every penny invested in home decoration. A wide variety of colors and textures of the stone allows you to choose the best option for each architectural style... Natural stone is mounted on a ventilated façade or on a wet façade. Some porous rocks, such as limestone or travertine, require additional water-repellent treatment.

The final stage of facade repair work

At the final stage, painting works in case of plastering works if the stone was installed (Inkerman stone, limestone, travertine) - treatment with water-repellent impregnations. Then the scaffolding is dismantled, cleaning adjoining territory, removal of construction waste.

If you still have questions or want to get a free consultation from a specialized specialist, call the number indicated on the website or contact us through the feedback form, and we will call you back!